Transcript
Bambright Cabinet Linear Light User Manual : APPLICATIONS INSTALL YOUR LINEAR LIGHT 1. Area : Indoor use only 1. Fix the fasteners at proper place. 2. Put the linear light into the fastener. Purpose : Cabinet lighting, Jewelry lighting, Decoration lighting SPECIFICATION 2 Kinds of mounting angle Dimension : 306(L) x 16.6(W) x 16.8(H) mm Light source : LED Input voltage : 24VDC Power consumption : 6W Operation temp. : -20oC ~ 40oC 2. SAFETY NOTICES Cautions : 1. Never use the power supply over 24VDC. (Please use appropriate power supply.) 2. Never cascade over 7 pcs linear lights. CONNECT YOUR LINEAR LIGHT Warning : Notics : Please use suitable power supply to 1. Don’t use improper power supply. driver linear lights. 2. Manufactuere can’t guarantee product life span if the operation - One 30W power supply can only drive maximum temperature is over 40 degree. Celsius or under -20 degree 4 linear lights in cascading. Celsius. - One 50W power supply can only drive maximum 3. Please don’t turn on the power before installation complete. 7 linear lights in cascading. - Do not cascade linear lights over 7 pcs. Plug dimension : Ø 1.0 mm Ø 3.5 mm 9 mm Ø 8.0 mm (Plug dimension maximum) Place inter-connector between to linear lights and make them as achain.