Download Acer

Acer
Acer –LCD-X163W
Service Manual
LCD Monitor Acer X163W
-0-
1
Table of Contents
Important Safety Notice
.........................................................................................01
01
Product Specification ..........................................................................................03
02
Flat Panel Specification .......................................................................................17
03
Exploded Diagram ..............................................................................................34
04
Troubleshooting ....................................................................................................35
05
Spare Parts List ...................................................................................................41
06
Schematics and Layouts.......................................................................................42
07
Assembly and Disassembly ................................................................................49
Appendix : User’s manual
Copyright
Copyright 2006 InnoLux Tech. Corp. Ltd
All Rights Reserved
This manual may not, in whole or in part, be copied, Photocopied, reproduced, translated, or converted to any
electronic or machine readable form without prior written permission of InnoLux Tech. Corp. Ltd.
Acer X163W Service Manual
1
Acer
Acer –LCD-X163W
Important Safety Notice
1.
Safety precautions
This monitor is manufactured and tested on a ground principle that a user’s safety comes first. However,
improper used or installation may cause damage to the monitor as well as to the user.
Warning:
This monitor should be operated only at the correct power sources indicated on the label on the rear of the
monitor. If you’re unsure of the power supply in you residence, consult your local dealer or Power
Company.
Do not try to repair the monitor by yourself, as it contains no user-serviceable parts. This monitor should
only be repaired by a qualified technician.
Do not remove the monitor cabinet. There are high-voltage parts inside that may cause electric shock to
human bodies.
Stop using the monitor if the cabinet is damaged. Have it checked by a service technician.
Put your monitor only in a lean, cool, dry environment. If it gets wet, unplug the power cable immediately
and consult your closed dealer.
Always unplug the monitor before cleaning it. Clean the cabinet with a clean, dry cloth. Apply non-ammonia
based cleaner onto the cloth, not directly onto the class screen.
Do not place heavy objects on the monitor or power cord.
z
z
z
z
z
z
z
2.
Product safety notice
Many electrical and mechanical parts in this chassis have special safety visual inspections and the protection
afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage,
wattage, etc. Before replacing any of these components read the parts list in this manual carefully. The use of
substitute replacement parts, which do not have the same safety characteristics as specified in the parts list,
may create shock, fire, or other hazards.
3.
Service notes
z
When replacing parts or circuit boards, clamp the lead wires around terminals before soldering.
z
Keep wires away from high voltage, high temperature components and sharp edges.
z
Keep wires in their original position so as to reduce interference.
z
Adjustment of this product please refers to the user’ manual.
2
Acer
Acer –LCD-X163W
01 Product Specification
1.
General:
Acer X163W is designed with analog interface input, it featured with embedded universal AC power supply . It’s a green
product and meets all ROHS standard. The power button and display control buttons are on the front of the monitor. The
monitors shall automatically to display lower resolution video modes into 1366 x768 full screen display. The image can be
adjusted through OSD control.
1.1 Main Features
Features
Specifications
Maximum resolution
1366 x 768@60Hz
Back light system
Actual
display
2 CCFL (top & bottom edge side)
Resolution
WXGA+ (1366 x 768)
Pixel pitch (mm)
0.252(H) x 0.252(V)
Display area
344.232 x 193.536 mm
Contrast ratio
Response time (Tr+Tf)
500‫׃‬1 (typ.)
Viewingangle (CR>=10)
Input interface
45°(L)/ 45°(R), 20°(U)/45°(D)
Analog(D-sub 15 pin)
Audio system
NA
8ms (typ.),
Power management
Compatible with Energy Star
Plug & Play
VESA DDC2B /CI
University AC power
supply
AC 100~240V, 50～60Hz
1.2 Accessories
Items
VGA
cable
Description
1.5m
●
2.
DVI
cable
User’s
manual
Warranty
card
NA
●
●
Quick-start Installation
Guide
Guide
●
●
Operation Specifications
The unit should suffer no visible cosmetic damage and should operate with no degradation in display quality during exposure
to the operating conditions and after exposure to the non-operating conditions, in any sequence.
2.1 Environmental conditions
3
Acer
Acer –LCD-X163W
Operating
Specification
Temperature range
0°C to 40°C
Relative humidity
20% to 90%
Altitude
0 to 3048M (10000 ft)
Storage
Temperature range
-20°C to 60°C
Relative humidity
10% to 90%
Altitude
0 to 9144M (30000 ft)
2.2 Safety, EMC, Ergonomics and Compatibility Requirements
Items
Safety
EMC
Ergonomics
Compatibility
Power
Management
Description
UL/cUL
CB
Nemko /GS
CCC
BSMI
●
●
●
●
●
FCC-B
CE
CCC
VCCI
●
●
●
●
TCO99
Nemko/Ergo
●
●
Other
Windows 95/98/Me
Windows 2000
Windows XP
Vista
●
●
●
●
Energy Star
●
4
Acer
2.3
Acer –LCD-X163W
Electrostatic Discharge Requirements
Item
Condition
Spec
Contact discharge : 4KV
Electrostatic Discharge
IEC61000-4-2(EN55024)
Contact discharge : 8KV
●
Air discharge : 8KV
Air discharge : 15KV
2.4
●
Reliability
Items
Condition
Spec
Note
≧ 40,000 Hours
Excluding the
LCD, CCFL
≧ 40,000 Hours(min)
Note1
MTBF
CCFL Life time
Luminance becomes 50%
Note1. Display an all WHITE field at mid Brightness and Contrast settings.
3. Electrical and Optical Characteristics and Performance
3.1 Main Power Supply
Items
Condition
Spec
Universal input full range
100~240VAC /50~60Hz
AC Input Current
100Vac
240Vac
0.8A(max)
0.4A(max)
AC Frequency Range
100Vac
240Vac
50Hz – 60Hz
Inrush Current
100Vac,cold star,25°C
240Vac,cold star,25°C
40A (max)
60A(max)
Regulator Efficiency
DC output full loading
≥75%
+14.2V output
+5V output
<500mv
<150mv
VCC14.2V(13.5~16.3V)
VCC5.2V(4.95~5.45V)
without Audio
1.1A(typ.),1.4A(max)
0.8A(typ.),1.0A(max)
≤25W
AC Input Voltage Range
Ripple and Noise
DC Output Voltage and Current
Power consumption
Note
Protection
See Table-1
Power management
See Table-2
Table-1
Protection
Condition
Spec
SCP(short circuit protection)
Short output (for 5V
output it must be shorted
before F802)
with auto-recovery function
OPP(Over power protection)
nominal AC input
32W ( min )
Table-2
Status
Power On
Power Saving
H-sy
nc
on
V-sy
nc
on
off
on
Video
Power
LED
active
≤ 25W
Blue
on
blanked
< 2W
Orange
off
blanked
< 2W
Orange
5
Acer
Acer –LCD-X163W
Power Off
off
off
blanked
< 2W
Orange
--
--
--
< 1W
Off
3.2 Backlight Power Supply
Panel: CMO M156B1-L01
Items
Specification
Lamp
2 CCFL
Input Voltage
14 (13.5~16.3)V
Input current
1.1A(typ.), 1.4A(max.)
On/Off switch level
5.5V≧Vno≧2.0 V (on)
-0.3V≤Voff≤ 0.8 V (off)
Brightness PWM duty
Extra PWM duty:35% --100% ,High=3.3V, Low=0.0V, Freq=4* Vsync.freq..
CCFL operating Voltage
650Vrms (Typ.),
3.0 mA (min.)
CCFL Current
7.0mA (Typ.)
8.0mA (Max.)
CCFL startup voltage
≧1200 Vrms (0˚C)
Operating frequency
Protect delay time
40~80 KHz
Efficiency
≥75%(dummy load instead of CCFLs:100Kohm*2)
> 1 second
Note: Other panels please refer to the reference panel specs.
3.3 Brightness output
The test to verify specifications in this section shall be performed under the following standard conditions unless
otherwise noted.
Temperature
Test pattern
Video Resolution
Video input level
Warm-up time
: 25 ± 5°C
: white
: 1366 x 768
: 700 mV ± 2%
: 30 minutes
LCD Module
BL
≥210 cd/m2
CMO M156B1-L01
Set brightness control and also contrast control at maximum, to measure the screen center, the light output shall ≥
BL cd/m2 (as panel spec)
3.4 White balance
Chromaticity Coordinate
Mode
x
y
Cool
9300K
0.283 ± 0.030
0.297 ± 0.030
Warm
6500K
0.313 ± 0.030
0.329 ± 0.030
Panel While x
Panel While y
User
The test standard conditions refer to Sec 3.3. (Brightness and contrast are under default value)
3.5 Brightness uniformity
The test standard conditions refer to Sec 3.3.
6
Acer
Acer –LCD-X163W
Min. luminance of nine points (backlight)
≥75%
Max. luminance of nine points (backlight)
4. Input / Output Signal Specifications
4.1 Video signals
Items
Analog RGB signal
Sync
Condition
Specification
Input impedance = 75 Ohm
0.7Vp-p
Input impedance ≧ 2.2k Ohm
TTL level
Logic High: 2.0V ~ 5.5V
Logic Low: 0V ~ 0.8V
Separate H/V-sync(+/-)
4.2 Signal Timing
4.2.1
D-SUB Inputs
Through D-SUB connectors, this unit can support FH= 31 ~ 57 KHz, Fv=56 ~ 70Hz and panel DCLK<=
85 MHz. SXGA display modes as below:
VESA MODES
Horizontal
Mode
VGA
SVGA
XGA
Resolution
Total
Nominal
Frequency
+/-0.5KHz
Vertical
Sync
Polarity
Nominal
Frequency
+/-1Hz
Sync
Polarity
Nominal
Pixel Clock
(MHz)
640*480@60Hz
800*525
31.469
N
59.941
N
25.175
800*600@56Hz
1024*625
35.156
P
56.250
P
36.000
800*600@60Hz
1056*628
37.879
P
60.317
P
40.000
1024*768@60Hz
1344*806
48.363
N
60.004
N
65.000
1024*768@70Hz
1328*806
56.476
N
70.069
N
75.000
P
66.667
P
30.240
MAC MODES
VGA
640*480@66.7Hz
864*525
35.000
Other MODES
XGA
1024*768@66Hz
1318*809
53.414
N
66.025
N
70.400
WXGA+
1366*768@60Hz
1792*798
47.714
P
59.790
P
85.500
Note: 1. Non-interlace signals only (An interlace signal cannot be display)
2. Please refer to F/W specification for more detail
3. Each frequency of Power Macintosh and Sun Ultra is a reference value
7
Acer
Acer –LCD-X163W
DDC signals
4.2.2
DDC signals:
5V@50mA TTL level
4.3 Timing requirements
Scan Frequency
Condition
Specification
Horizontal
Sync polarity: (+) or (-)
31 ~ 57 KHz.
Vertical
Sync polarity: (+) or (-)
56-70Hz
Out of range
Excluding
Horizontal 31~57 KHz or
Vertical 56-70 Hz
panel DCLK<= 85 MHz
Message “Input Not Supported” on screen
4.4DDC data
4.4.1
EDID Standard Compliance
EDID File Format
EDID Structure
EDID Data Table
X163W EDID table
0
1
2
3
: VESA’s EDID Standard Version #3, Revision #0,
: Version #1, Revision #3.
: See the attached table (for example)
4
5
6
7
8
9
A
B
C
D
E
F
00 5C AA 80
80
0
00
FF FF FF FF FF FF
00
04
72
58
1
08
12
01
03
23
14
78
E8
55
45 A3 55
4A
97
27
2
15
50
54
33 0C 00
61
46
01
01
01
01
01
01
01
01
3
01
01
01
01
01
01
8A
21
56
B0
51
00 1B
30
48
90
4
13
00
58 C1 10
00
00 1C 00
00
00 FD 00
38
46
1F
5
39
09
00
0A
20
20
20
20
20
20
00
00
FF
00
31
6
32
33
34
35
36
37
38
39
30
41
42 0A 00
00
00 FC
7
00
58
31
36
33
57
0A
20
20
20
20
20
00
08
00
20
20
43
X163W EDID table detail description:
Address
Vendor Product Identification
00~07h
08~09h
Description
ID information Header
ID information Header
ID Manufacturer
ACR
Name
0A~0Bh
ID Product Code
0C~0Fh
ID Serial Number
0058
8080AA5C
10h
Week of Manufacture
08
11h
Year of Manufacture
2008
12h
Version Number
1
13h
Revision Number
3
14h
Analog/Digital Signal Level [7] Analog Signal Level
Signal Level Standard [6:5] 0.700, 0.300 (1.000Vp-p)
Setup [4] No Blank -to-black Setup
8
Acer
Acer –LCD-X163W
Sync Inputs Supported [3] Separate Syncs. Supported
Sync Inputs Supported [2] No Composite Sync. Supported
Sync Inputs Supported [1] No Sync. on Green Supported
15h
16h
17h
18h
Sync Inputs Supported [0] No Serration Required
Max. Horizontal Image
35 cm
Size
Max. Vertical Image
20 cm
Size
Gamma 2.2
VESA DPMS [7] Standby
VESA DPMS [6] Suspend
Display Off Consumption [5] Active Off/Very Low Power
Display Type [4:3] RGB Color Display
sRGB Standard Color Space
No sRGB Color Space
[2]
Preferred Timing Mode [1] No Preferred Timing Mode
19~22h
23h
24h
GTF Standard [0] No Default GTF Supported
Red (x ,
0.638, 0.333
y)
Green (x , y) 0.290, 0.591
Blue (x , y) 0.153,
0.082
White (x , y) 0.313,
0.329
IBM, VGA [7]
720 x 400 @ 70Hz (N/A)
IBM, XGA2 [6]
720 x 400 @ 88Hz (N/A)
IBM, VGA [5]
640 x 480 @ 60Hz
Apple, Mac II [4]
640 x 480 @ 67Hz
VESA [3]
640 x 480 @ 72Hz (N/A)
VESA [2]
640 x 480 @ 75Hz (N/A)
VESA [1]
800 x 600 @ 56Hz
VESA [0]
800 x 600 @ 60Hz
VESA [7]
800 x 600 @ 72Hz (N/A)
VESA [6]
800 x 600 @ 75Hz (N/A)
Apple, MacII [5]
832 x 624 @ 75Hz (N/A)
IBM [4]
25h
1024 x 768 @ 87Hz(I) (N/A)
VESA [3]
1024 x 768 @ 60Hz
VESA [2]
1024 x 768 @ 70Hz
VESA [1]
1024 x 768 @ 75Hz (N/A)
VESA [0]
1280 x 1024 @ 75Hz (N/A)
Apple, Mac II [7]
1152 x 870 @ 75Hz (N/A)
9
Acer
Acer –LCD-X163W
VESA [6]
800 x 600 @ 85Hz (N/A)
VESA [5]
1024 x 768 @ 85Hz (N/A)
VESA [4]
1280 x 1024 @ 60Hz (N/A)
VESA [3]
1280 x 1024 @ 85Hz (N/A)
VESA [2]
1600 x 1024 @ 60Hz (N/A)
VESA [1]
1600 x 1200 @ 75Hz (N/A)
VESA [0]
1600 x 1200 @ 85Hz (N/A)
26~27h
Standard Timing Identification #1
28~29h
Standard Timing Identification #2 No Application
2A~2Bh
Standard Timing Identification #3 No Application
2C~2Dh
Standard Timing Identification #4 No Application
2E~2Fh
Standard Timing Identification #5 No Application
30~31h
Standard Timing Identification #6 No Application
32~33h
Standard Timing Identification #7 No Application
34~35h
Standard Timing Identification #8 No Application
36~46h
1024 x 768 @ 66Hz
Pixel Clock
85.86 MHz
Horizontal Active
1366 Pixels
Horizontal Blanking
432 Pixels
Vertical Active
768 Lines
Vertical Blanking
27 Lines
Horizontal Sync Offset
72 Pixels
Horizontal Sync Pulse Width
144 Pixels
Vertical Sync Offset
1 Lines
Vertical Sync Pulse Width
3 Lines
Horizontal Image Size
344 mm
Vertical Image Size
193 mm
Horizontal Border
0 Pixels
Vertical Border
0 Lines
Non-Interlaced
Normal Display, No Stereo
Flags
Digital Separate
Vsync Positive Polarity
Hsync Negative Polarity
48~59h
Min. Vertical Frequency
56 Hz
Max. Vertical Frequency
70 Hz
Min. Horizontal Frequency
31 kHz
10
4: 3
Acer
Acer –LCD-X163W
Max. Horizontal Frequency
57 kHz
Max. Pixel Clock
90 MHz
5A~6Bh
Monitor Serial Number
1234567890AB
6C~7Dh
Monitor Name
X163W
7Eh
Extension Flag
00
7Fh
Checksum
43
5. Function Specifications
All the tests to verify specifications in this section shall be performed under the following standard conditions unless
otherwise noted. The standard conditions are:
Temperature
: 25 ± 5°C
Warm-up time
: 30 minutes minimum
Checking display modes : All the specified modes
5.1 Panel general specifications
5.1.1 General specifications
Supplier
Model name
Display Area
Pixel Pitch
Display Colors:
Number of Pixel
Pixel Arrangement
Brightness
Contrast Ratio
Viewing Angle
Display Mode
Frame rate
Response Time
Surface
Treatment
Lamp
Outline
Dimension
CMO
M156B1_L01
344.232 x193.536 mm
0.252(H) x 0.252(V)
16.7 Million
1366x768 pixels
RGB vertical stripe
250cd/m2(Typ.)
210cd/m2 (Min.)
500:1 Typ.
350:1 Min.
45(R),45(L),45(D),20(U) (Typ., CR>10)
Normally White
75Hz
Tr + Tf = 8ms Typ.
Anti-glare, Haze = 25%,
Hard coating (3H)
2 CCFL
363.8(W)x215.9(H)x14.3(D) (Typ.)
5.1.2 LCD module defects
LCD module defects check follow to the IIS.
5.2 Keypad Function
5.2.1 Control buttons on the front bezel
CONTROL KEY
[AUTO]
KEYS FUNCTION
A. When “main OSD” un-displays, press [AUTO] to perform “scenario OSD” ;
B. When “scenario OSD” displays, press [AUTO] to perform auto-adjustment;
C. When “main OSD” displays, press [AUTO] to return to previous level menu or exit
“main OSD”.
11
Acer
Acer –LCD-X163W
[e]
A. When OSD un-displays, when press [e] the e-Color menu will show
B. When OSD displays, when press [e] the e-Color menu will show, OSD will disappear
[MENU]
A. When “main OSD” isn’t shown on screen, press [MENU] to enter “main OSD”
interface;
B. When “main OSD” and displays, press [MENU] to perform function of menu icon that
is highlight or enter next level menu.
When “main OSD” and “scenario OSD” displays, press these keys to change the
contents of an adjustment item, or change an adjustment value
[►], [◄]
[POWER]
Power on or power off the monitor
5.2.2 Hot Key Operation
HOT KEY OPERATION
FUNCTION
FACTORY
MODE
e
DESCRIPTION
◄
►
MENU
●
POWER
●
Press [e] & [MENU] at the same time, and then
press [POWER] for DC power on. OSD menu
will be shown with “F” on the left top. Select “F”
for entering factory mode.
ON
5.3 OSD Structure
The On-Screen Display (OSD) shall be an easy to use icon based menu through keypad OSD buttons or remote
control unit. The unit shall leave the factory with all OSD controls set to their default values.
First
Second
Third
---
Contrast
Control Range
0 ~ 100
Brightness
---
Brightness
Image
Position
Focus
Clock
Horizontal
Vertical
Warm (6500K)
Cool (9300K)
Color
User
Language
NO-EMEA
EMEA
English
English
0 ~ 100
Default Value
User mode
50
Text mode
50
Standard mode
50
Graphics mode
60
Movie mode
User mode
56
77
Text mode
44
Standard mode
77
Graphics mode
97
Movie mode
77
-------------
0 ~ 100
Depend on each timing
0 ~ 100
50
0 ~ 100
50
0 ~ 100
Depend on each timing
Red
0 ~ 100
80
Green
0 ~ 100
80
Blue
0 ~ 100
80
---
---
English
-----
12
Acer
Acer –LCD-X163W
Deutsch
Deutsch
Español
Español
简体中文
Hollands
繁體中文
Русский
Français
Français
Italiano
Italiano
日本語
Suomalainen
Hor. Position
OSD
Ver. Position
OSD Timeout
Input
Analog
Digital
Resolution
Info
H. Freq
V. Freq
Reset
Exit
-----
-----------------------------------
--------------0 ~ 100
50
0 ~ 100
50
10~ 120
20
---------------
---------------
Notes; ○
1 Clock default 50 is for Visa timing. Others depend on timing.
8.0 SOP of firmware upgrade
8.1
Operational
condition:
Equipment: PC, ISP card, signal cable and power cable.
ESD requirements:
antistatic wrists, antistatic gloves
(fingers), and connecting cable
Name of ISP program: ISP_Tool_v3.7.5.3
Manufacture of FW IC：PMC/SST/MX
8.2 Operational steps:
1. Connection: connect PC to PCBA with signal cable, and then keep AC and DC in open state.
One port of ISP
program card
is connected to
PC print port.
13
Acer
Acer –LCD-X163W
2. Adjust ISP programming
Firstly, double click ISP_Tool_v3.7.5EXEI and open ISP program, then select “Device”, next select
manufacturer model of FW IC, which should be correspondent with that of PCBA FW IC. Double click
Figure One.
Secondly﹐download FW software: first select “READ”, and then load
FW software in Rooter (Fig.2).
FW software
rooter
Software
Checksum
Thirdly, select “Connect” and enter ISP MODE as in the following Figure 3.
14
Acer
Acer –LCD-X163W
Fourthly, select “AUTO”, and keep its default value. Click “RUN” for beginning programming. There will
be prompting if programming is OK.
Note: if programming fails or success rate is not high, click “Config” and adjust its speed in
“E2PROM DEVICE SETTING”
15
Acer
Acer –LCD-X163W
After connecting, AC ON,
DC ON
◆Flowing chart
OK
Open ISP program
OK
Choose manufacturer
and model of FW IC
OK
LOAD FW software
OK
Click Connect and enter
ISP MODE
OK
Choose Config
and adjust
programming
Click AUTO and RUN for
beginning programming
OK
NG
Turn off power if
programming is OK
16
Acer
Acer –LCD-X163W
02. Flat Panel Specification
17
Acer
Acer –LCD-X163W
18
Acer
Acer –LCD-X163W
19
Acer
Acer –LCD-X163W
20
Acer
Acer –LCD-X163W
21
Acer
Acer –LCD-X163W
22
Acer
Acer –LCD-X163W
23
Acer
Acer –LCD-X163W
24
Acer
Acer –LCD-X163W
25
Acer
Acer –LCD-X163W
26
Acer
Acer –LCD-X163W
27
Acer
Acer –LCD-X163W
28
Acer
Acer –LCD-X163W
29
Acer
Acer –LCD-X163W
30
Acer
Acer –LCD-X163W
31
Acer
Acer –LCD-X163W
32
Acer
Acer –LCD-X163W
33
Acer
Acer –LCD-X163W
03
Exploded
Diagram
3.1. LCD Exploded drawing (All)
Q’ty/
set Unit
No
S/N
Description
Torque
Remark
1
509146306200R
SCREW,P,CROSS,W/WAS,M3*6,Zn-Cc
5
pcs
3.75±0.25
FOR PCB&CHASSIS
2
3
509000000700R
509412610500R
BOLT,#4-40x11.8,Ni
pcs
pcs
3.5～4.0
6.0~7.0
for VGA
SCREW,B,CROSS,T.T-4*10,BLK ,ROHS
2
1
FOR Bezel AND BACKCOVER
4
509216608110R
SCREW,F,CROSS,M4*8,ZN ROHS(NYLOK,35F)
4
pcs
11.0±1.0
HINGE ASSY TO CHASSIS*4
34
Acer
Acer –LCD-X163W
04 Troubleshooting
1 No Power & LED Off
No power
Check circuit
if short
Check primary
rectifier voltage
Check F801, L801,
D801
Check pin1 of
IC802 voltage
about 2V
Check R803, R807,
R824, R825,R812
Check R817,
D808,R816,
C818,C817
Check pin2 of IC802
voltage about 2.5V
Check IC801 and
secondary feedback
Check pin2 of IC802
voltage is low
END
35
Check IC802,
C805, T801
Acer
Acer –LCD-X163W
2. DC output voltage is unstable
Output voltage unstable
Check Voltage of
ZD801 below
12V?
Check circuit
if short
Check ZD801, D803,
D805
Check ZD801
Check reference
voltage
Check Pin R of
IC803 voltage
about 2.5V
Check R809, IC801,
Check R810, R811
Check Vpin2-4
of IC801 is 1V
Check feedback
circuit
Check IC801
have output
Change IC
END
36
Check R817,
C815, D806
Acer
Acer –LCD-X163W
3. No Raster
No raster?
Yes
LED Blue?
Yes
Backlight can’t
be turned on.
Yes
Is there 14Vdc
voltage on pin9 of
IC501?
No
Check power supply
Yes
Is there high-level
voltage on pin8 of
IC501?
No
Is Ok R503?
Yes
Check I/F board
No
Yes
Are connected rightly
CN501, CN502?
R503 open
Connecting the
output connector
again
No
Yes
Is there instantaneously pulse
wave on pin14, pin11 of
IC501 at the moment of
restart?
No
Is Ok IC501?
Yes
No
U501 fail
IC501 fail
Yes
Is T501 ok?
No
T501 fail
Yes
END
Check feedback circuit
D507,D508.
37
Acer
Acer –LCD-X163W
4.Black Screen
38
Acer
Acer –LCD-X163W
5. Bad Screen
39
Acer
Acer –LCD-X163W
6. White Screen
40
Acer
Acer –LCD-X163W
05 Spare Parts List
INL P/N
Description
MOQ
20
791791300500R
PCBA,I/F BOARD,W/O,LE15F9-510,ROHS
791551400500R
PCBA,P/I BOARD,W/O SPK,LE15E1-510 ROHS
791791500000R
PCBA,KEYPAD BOARD,LE15F9-510 ROHS
20
453070801190R
PWRCORD 16A/250V BLK 6FT VDE/KTL H05VV-F
453010100470R
CABLE D-SUB 15P MALE 1.5M BLK/BLUE
430303001630R
HRN LVDS FFC 30P 125mm ROHS
430300802000R
HRN ASS'Y 171mm 2X4PW/O4P,8PTO 1X8P W/O7
714050017700R
Assy,back cvoer，for CMO,for out,LE15F9
714030018901R
ASSY, BEZEL,BLACK,for out,LE15F9
714011204100R
stand le15F9
714020015100R
Assy,base cvoer,for out,LE15F9
501020223400R
back cover，for CMO,for out,LE15F9
701000010200R
Assy Chassis for CMO for out LE15F9
631102050170R
20
ROHS
20
20
20
20
20
20
20
LCP 15.6"M156B1-L01-901(A) (CMO)ROHS
41
20
20
20
10
Acer
Acer –LCD-X163W
06 Schematics and Layouts
6.1 PI BD Layout
42
Acer
Acer –LCD-X163W
43
Acer
6.2
Acer –LCD-X163W
IF BD Layout
44
5
4
3
2
1
VIN
C513
C507
2.2u/25V 2.2u/25V
D
D
R502
10K 1%
OV1
LI
C502
3300p/50V
C503
10u/16VSH
LCS
R505
88.7K 1%
R501
1M
R526
NC
LI
3
COMP
4
FT
5
AGND
GND
15
BG
14
VCC
13
FSET
SW
12
6
BOSC
TG
11
7
DBRT
BT
10
8
REF
OV
2
16
EN
VIN
C514
2.2u/25V
C506
1u/16V
R507
10
D506
SN4148
C519
10p/3KV
R506
10K
T501
C509
0.047/50V
C511
0.1/25V
U501
9
R508
10
1
8
2
7
3
6
4
5
R504
100K 1%
2
3
8
5
6
L
C520
3300p/50V
D507
SN4148
R518
20K 1%
7
R522
10K 1%
1
H
2
L
R525
470
OL2
C517
10p/3KV
C518
3300p/50V
CN501
4100-D02
R521
10K 1%
LV2
R517
20K 1%
CN502
4100-D02
R520
820 1%
SPW-078
AF4971NN
ON/OFF
R503
10K
H
2
R524
470
OL1
LV1
C504
220p/50V
C
1
REF
IC501
MP1008
BRIGHTNESS
C512
2.2u/25V
R519
820 1%
D508
SN4148
C505
0.01/50V
C
LI
VIN
+14V
R523
2K2 1%
+
C510
220u/25V
REF
SH
D509
SN4148
R527
220K
R515
75K
3
LCS
LV2
D501
BAV70
R511
560K 1%
R530
150K 1%
1
Q503
Q501
2N7002
PMBT3904
OL1
R512
D505
10K
SN4148
2
LV1
2
R528
1M
C516
0.1/50V
D503
SN4148
B
R516
75K
OL2
1
R513
10K
D504
SN4148
2
C501
NC
1
3
R510
68K 1%
3
3
R509
240K
2
OV
B
Q502
2N7002
1
R529
1M
InnoLux
D502
SN4148
Document Number :
C515
0.1/50V
SIZE :
doc
APPRO BY :
C
TITLE :
CHECK BY :
Inverter SCH
DATE :
SHEET
DRAWN BY :
2008-01-02
4
OF
4
Rev :
01
A
A
Title
Size
C
Date:
5
4
3
2
<Title>
Document Number
<Doc>
Rev
<RevCode>
Wednesday, April 09, 2008
Sheet
1
1
of
1
5
4
3
2
1
D
D
TO CN104
ADC KEY0
ADC_key1
CN901
ADC_key2
1
2
3
4
5
6
7
8
3
1
5P35V
R901
0603 3K9
5P35V
5P35V
R902
0603 3K9
5P35V
5P35V
LED_A
5P35V
5P35V
LED_G
O/G
EP902
C
8P 1.5mm SMD
EP901
2
SW901
SW TACT
5P35V
1
2
SW902
SW TACT
EP903
1
2
SW903
SW TACT
EP904
1
2
SW904
SW TACT
EP905
1
2
SW905
SW TACT
EP906
2
SW906
SW TACT
EP907
2
EP908
1
LED901
1
C
R903
0603 3K9
E-COLOR
AUTO
MENU
MINUS
PLUS
POWER
B
B
A
A
Title
Size
A
Date:
5
4
3
<Title>
Document Number
<Doc>
Wednesday, April 09, 2008
2
Rev
<RevCode>
Sheet
1
of
1
1
5
4
3
2
1
D
D
CON--CLX-CI0108P1VDL
CN104
2x4P 2.0mm
C
1
2
3
4
5
6
7
8
ADC 0
ADC 0
ADC 1
ADC 2
ADC 1
LED A
GND
LED G
LED A
ADC 2
GND
CN901
1
2
3
4
5
6
7
8
C
LED G
8P 1.5mm
B
B
A
A
Title
Size
A
Date:
5
4
3
<Title>
Document Number
<Doc>
Wednesday, April 09, 2008
2
Rev
<RevCode>
Sheet
1
of
1
1
4
3
Note 4
R173
+4.5V
VCC5V
CCFL_ON/OFF
C101
GND
3
DIO--SMA
BRIGHTNESS 4
VOLUME 4
MUTE
4
R101
0
R0805/NC
+
VIN
VOUT
C104
0.1/16V
PAD
+3.3V
2
+3.3V
4
+
100u/16V/NC
C102
100u/16V
VOUT
PAD
+1.8V
2
+1.8V
4
+
4 C106
0.1/16V
C105
To Power/Inverter
Board
U101
LD1117AL-3.3V
VIN
4
C103
22u/16V/NC
D
C107
D101
SSM24APT
3
0.1/16V/NC
1
2
3
4
5
6
7
8
U102
LD1117AL-1.8V
+3.3V
Note 3
ADJ
Note 2
0.1/16V/NC
SN4148
VCC5V
ADJ
D
D108
VGA5V
CN101
8P 2.0mm
1
0/NC
1
CON--JWT-A2008WV08P
Note 1
2
1
5
GND
GND
Note 6
Q101
AP2305GN
2
3
R105
4K7
3
R107
100K
Q103
PMBT3904
+
1
1
4 PANEL_ENABLE
Q104
PMBT3904
Q102
2N7002/NC
2
R106
100K
R111
4K7/NC
GND
3
1
4 CCFL_ENABLE
R110
4K7
2
C111
0.1/16V
R109
100K
CCFL_ON/OFF
0.1/16V
C108
0.1/16V
4
C110
R103
10K
6V2
R113
0
R0603
R102
10K
1
VCC_ESD
ZD107
VCC5V
VLCD
R112
51/NC
R0603
100u/16V
Note 5
C
VLCD
C109
Note 4
VCC5V
2
+3.3V
3
C
GND
C112
1u/16V
GND
R108
47K
B
B
GND
GND
Mstar 1PFR Common Board
InnoLux
A
Note:
1. CN101 is no locked packgae for normal model.CN101 is locked packgae for special model(Dell).
2. D101 must be co-layed with R101
3. U101 must contain TO263, TO252 and SOT223 package
4. Reserved for 3.3V panel.
5. Low enable.
6. Reserved R111,R112,Q102 for panel power discharge.
Document Number :
1PFR
A4
CHECK BY :
POWER (DC TO DC)
SHEET
4
APPRO BY :
TITLE :
2008-1-26
DATE :
5
SIZE :
3
2
OF
2
4
DRAWN BY :
Rev :
V02
1
A
5
4
3
C820
4700P Y1 NC
C805
68u/450V
1
12
R806
4.7R
1 2
2
R804
47
+
R807
2.4M
2
D807
SB540
6
R817 D806
6R8 A02
C812
680u 10V
9
C815
47u/25V
R809
150R
51K 1%
R811
1
C806
2200P Y1
250V
3
D808
1N4003
R816
6R8
2
D809
C
SN4148
C818
47u/25V
A
C822
C821
4700P Y1
RT801
5R
R810
5K1 1%
C816
0.1u 100V
MEB
LTV817M
NC 9.1V
ZD806
C
1
R815
1K
2 1
R814
1K
R
IC803
TL431
1
2
1
5
C817
0.1u 50V
2
6
R812
10K 1%
8
1
C804 0.47u X2
275V
1
2
2
1
2
1
C
2
S
S
S
IC802
TOP258P
S
IC801
4
M
4
1
C801
2200P Y2
250V
R813
10K
1
2
1
D
2
330K
7
R820
C814
220uF 10V
10
5
C
R821
330K
4A/125V
2
R825
2.4M
5uH
1
1
F802
2
2
L803
+5V
3
D804
MUR1100
1
1
2
R822
330K
2 1
R824
2.4M
1
1
4
2
1
12V 1W
ZD801
8
-
3
C808
680uF 25V
7
4
L801
12mH
2
C811
1n 500V
D
R829
10 1W
5uH
2
1
3
2
2
+14V
D805
SB5150
2
NC 47p1kV
C807
L802
11
R805
68K 2W
2
+ 1
D801
BL4-06
1
D
C803
4n7/1KV
R803
2.4M
1
C802
1n 500V
R802
10R
1 2
T801
SPW-093
400V
2
10u/16V
R818
3K3 1%
PGND
B
B
F801
2A/250V
1
2
1
2
3
4
5
6
N
L
CN801
3
P801
InnoLux
+5V
BenQ 15W
Document Number :
SIZE :
B
ON/OFF
BRIGHTNESS
APPRO BY :
TITLE :
50mm 6P
CHECK BY :
Power SCH
AC IN
TO SCALER BD CN101
C825
0.1/50V
2008-01-03
DATE :
SHEET
2
OF
3
DRAWN BY :
Rev :
V01
A
A
5
4
3
2
1
5
75 1%
75 1%
75 1%
R118
R119
R114
47
C113 0.1u/16V
0
R115
47
C114 0.1u/16V
0
R116
47
C115 0.1u/16V
C117
C118
10p/50V/NC 10p/50V/NC
R122
84.5
C119 0.1u/16V
R123
84.5
C120 0.1/16V
R124
84.5
C121 0.1u/16V
VGA_DET
D102
BAV99
1
2
D103
BAV99
1
2
D104
BAV99
1
2
3
VGA_DET
D105
BAV99
1
VCC_ESD
VCC5V
4
BLUE+
4
SOG
4
RED-
4
GREEN-
4
BLUE-
4
C125
0.1/16V
R126
0/NC
VGA_DET 4
C
1
C124
0.1/16V
D
VGA5V
2
C123
0.1/16V
0.1/16V/NC
4
GREEN+
Note 4
C127
C122
0.1/16V
RED+
D106
BAV70
C128
0.1/16V
3
ZD102
C
C126 0.1/16V
6V2
3
Note 3
2
1
0
C116
10p/50V/NC
3
GND
2
RB101
R0603
RB102
R0603
RB103
R0603
3
R120
16
15
R117
14
0
13
0/NC
D
3
Note 2
R121
12
CN102
DZ11AA1-H5W6-4F
R
1
6
G
2
7
B
3
8
VGA5V
4
Note 1
9
5
10
17
11
4
GND
GND
R127
4K7
VGA_SCL
VGA_SDA
R131
R132
FB101
120Ω
2K2
33p/50V
C130
GND
R136
GND
C129
2K2
R135
6V2
ZD106
6V2
6V2
ZD105
ZD104
ZD103
6V2
B
33p/50V
R133
R134
1K
1K
R128
4K7
R129
10K
U103
AT24C02BN
R130
1K
8
7
6
5
100
100
VCC
WP
SCL
SDA
4
4
WP_EDID 4
C131
33p/50V/NC
DDC_SDA_VGA 4
C132
33p/50V/NC
Mstar 1PFR Common Board
SIZE :
1PFR
APPRO BY :
A4
TITLE :
Note:
1. R120 is reserved for Samsung model.
2. R0603 package for Bead. C116,C117,C118 are reserved for EMI or performance issue.
3. C122,C123,C124,C125 are reserved for ESD or EMI issue.
4. R126 is reserved for Samsung model.
5. C131,C132 are reserved for tuning performance issue.
4
B
DDC_SCL_VGA 4
Note 5
Document Number :
5
1
2
3
4
GND
HSYNC
VSYNC
InnoLux
A
A0
A1
A2
GND
3
CHECK BY :
VGA-INPUT
2008-1-26
DATE :
SHEET
3
OF
2
4
DRAWN BY :
Rev :
V02
1
A
5
+3.3V
4
VDDP
FB104
60Ω
+3.3V
+
D
C139
0.1/16V
1
CN103
+
C136
22u/16V
GND
+1.8V
2
AVDD
FB103
60Ω
C138
22u/16V
3
C137
0.1/16V
GND
VLCD
C133
22u/16V
C134
0.1/16V
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
RXO0RXO0+
+
C135
0.1/16V
AVDD
VDDP
VDDC
RXO1RXO1+
R150
2K2/NC
R149
0
3
RED+
3
RED3
GREEN+
3
GREEN3
SOG
3
BLUE+
3
BLUE3
HSYNC
3
VSYNC
3 DDC_SDA_VGA
3 DDC_SCL_VGA
RST
RIN0P
RIN0N
GIN0P
GIN0N
SOGIN0
BIN0P
BIN0N
HSYNC0
VSYNC0
DDCA_SDA/RS232_TX
DDCA_SCL/rs232_RX
52
LVB0M
LVB0P
50
49
RXO0RXO0+
LVB1M
LVB1P
LVB2M
LVB2P
LVBCKM
LVBCKP
48
47
46
45
44
43
RXO1RXO1+
RXO2RXO2+
RXOCRXOC+
RXOCRXOC+
GND
VDDP
VDDC
VDDC
30
53
C142
0.1/16V/NC
VCTRL
RXO3RXO3+
RXO2RXO2+
RXOCRXOC+
RXO3RXO3+
VLCD
D
FFC-CON/NC
GND
FFC-CON
CON--PI-AL230C
GND
3
R151
0
R172 470/NC
13
12
10
9
C143 1000p/50V/NC
11
8
7
16
17
18
19
AVDD_ADC
6
GND
51
RXO2RXO2+
+4.5V
RXO1RXO1+
CN105
VDDC
FB102
60Ω
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
RXO0RXO0+
8
7
3
4
WP_FW
R191
1K
R192
10K
U108
PM25LV010A-100SCE
VCC
SO 2
HOLD# CS# 1
WP#
SCK 6
GND
SI 5
RST
VCC5V
2
R177
10K
Q107
PMBT3906
GND
1
C157
22p/50V
LED_A_C
3
C158
22p/50V
R167
R0603
54
R137
0
RST
1
XIN
2
100/NC
R138
0
XOUT
GND
R169
10K
100/NC
10K
10K
10K/NC
10K/NC
10K
R145
R146
R147
60
61
62
63
64
R144
GPIO_P06
GPIO_P07
PWM0/GPIO_P26
GPIO_P13
GPIO_P14
R171
R141
R154
R155
WP_EDID 3
PANEL_ENABLE 2
CCFL_ENABLE 2
BRIGHTNESS 2
1K
1K
1K
1K
POWER/MENU
ENTER/PLUS
EXIT/MINUS
ADC_KEY0
ADC_KEY1
ADC_KEY2
LED AMBER
LED GREEN
R160
R159
R156
LED_A_C
LED_G_C
VOLUME 2
MUTE
2
VGA_DET 3
1K/NC
1K/NC
1K
C174 0.1/16V
B
31
32
MODE[0]
MODE[1]
26
25
R157
R158
100
100
VCC
WP
SCL
SDA
A0
A1
A2
GND
1
2
3
4
AT24C04N
GND
GND
GND
R140
10K
GPIO_P10/I2C_MCL
GPIO_P11/I2C_MDA
8
7
6
5
GND
WP_OSD
3
5
29
LED_G_C
R170
R0603
57
58
59
WP_OSD
WP_FW
U106
R139
10K
R176
10K
2
LED_G
GPIO17/SAR0
GPIO_P00/SAR1
GPIO_P01/SAR2
VCC5V DETECT
GND
1
3
R168
330
R0603
20
27
28
55
56
+3.3V
VCC5V
Q108
PMBT3906
GPIO_P15/PWM0
PWM2/GPIO_P24
GPIO_P27/PWM1
GPIO_P12
PWM1/GPIO_P25
10K
SDO
SCZ
SCK
SDI
R143
21
22
23
24
10K
REFM
R148
14
U105
TSUM1PFR
X101
14.31818MHz
R166
10K
R165
330
R0603
LED_A
REFP
C165
0.1/16V
GND
B
15
GND
VCC5V
10K
R190
10K
C140
1u/16V
REXT
R163
+3.3V
4
R142
GND
+3.3V
R183
R125
390 1%
GND
C
RXO3RXO3+
4K7
4K7
GND
42
41
40
39
38
37
36
35
34
33
10K
2
AVDD
R153
100K
LVB3M
LVB3P
LVA0M
LVA0P
LVA1M
LVA1P
LVA2M
LVA2P
LVA3M
LVA3P
20K
Q105
PMBT3904/NC
C164
1u/16V
R161
R162
R152
47K/NC
R184
1
C
GND
Note 4
Note 2
POWER/MINUS
MENU/PLUS
AUTO/ECOLOR
1
2
3
4
5
6
7
8
ADC_KEY0
ADC_KEY1
ADC_KEY2
LED_A
LED_G
ADC_KEY2
C173 0.1/16V
C172 0.1/16V
C171 0.1/16V
5P35V
LED_GREEN
OTHER_KEY
R178
0/NC
C169 0.1/16V
EP102
5P35V
C168 0.1/16V
To Keypad
Board
EP101
0.1/16V/NC
LED_AMBER
C167
A
CON--CLX-CI0108P1VDL
CN104
2x4P 2.0mm
Note:
1. LED blue driving circuit is reserved for BenQ model.
2. Bypass capacitor C167,C168,C169,C170,C171,C172,C173 are for ESD and EMI issue. ESD component
EP101,EP102,EP103 are for GPIO direct driving LED.
3. RL111,RL112,RL113 are reserved for some panel spec.
4.CN103 &CN104 are no lockedpackgae for normal model.
CN103 &CN104 are locked packgae for special model(Dell).
5.Delete R149,R150,R151,R152,Q105.(Reset reserved components), and change Reset Voltage from 5V to 4.5V.
A
Document Number :
1PFR
SHEET
3
2
APPRO BY :
CHECK BY :
SCALER
2008-1-26
DATE :
4
SIZE :
C
TITLE :
GND
5
Mstar 1PFR Common Board
InnoLux
4
OF
4
DRAWN BY :
Rev :
1
V02
Acer
Acer –LCD-X163W
7.0 Assembly and Disassembly
The tool of Assembly and disassembly : 1) Electrostatic gloves 2) Electric screwdriver: the lengthe of screwdriver top is 10±0.5cm ;the diameter of screwdriver
top is Φ5*H5mm
45
Acer
Acer –LCD-X163W
Assembly and Disassembly (continue)
S4
F ix
c h a s s is
&pow ebo
a rd
In s e r t p o w e rb o a rd in to th e d e s ig n a te d
lo c a tio n o f c h a s s is ,lik e th e a tta c h e d
P ic tu re
P C B A ,P /I
B O A R D ,W /O
791551400500R
S P K ,L E 1 5 E 1 - 5 1 0
ROHS
In s e rt K e y p a d
w ire
S5
In s e rt
m a in b o a r
d 's w rie
S6
C onnect
m a in b o a r
d & p o w e rb
o a rd
S7
T w is t
PCBA
s c re w
In s e rt L V D S w ire
1 .C h e c k if th e m a in b o a rd a n d re le v e n t
w ire y o u c h o o s e a re O K .
2 .In s e rt th e w ire in to th e m a in b o a rd lik e
th e P ic tu re
791791300500R
P C B A ,I/F
B O A R D ,W /O ,L E
1 5 F 9 -5 1 0 ,R O H S
C o n n e n t p o w e rb o a rd w ith th e re le v a n t P IN
430303001630R
in th e m a in b o a rd lik e th e a tta c h e d P ic tu r e
1
2
H a n d le e le c tric o p e n e r a n d 2 p c s o f M 3 *
s c re w
46
S C R E W ,P ,C R O S
5 0 9 1 4 6 3 0 6 2 0 0 R S ,W /W A S ,M 3 * 6 ,
Z n -C c
Acer
Acer –LCD-X163W
Assembly and Disassembly (continue)
4
S8
3
Tw ist
PCBA
screw
Fix 3 pcs of screw s separately on the
pow eboard and m ainboard like the
attached P icture1
SC R E W ,P,C R O S
509146306200R S,W /W AS ,M 3*6,
Zn-C c
5
S9
Tw ist
H exagona
l screw s
S10
Insert
LV D S
w ire into
panel
1
2
(1). H andle hexagonal screw s and electric
SC R E W ,P,C R O S
opener
509116612100R S,M 4*12,Zn,R O H
(2). Tw ist screw in the interface like the
S (N Y LO K)
attached P icture.
1.Tear off the adhensive tape of FFC w ire;
2.Insert FFC w ire into the interface of
H R N LV D S FFC
panel
430303001630R 30P 125m m
3.P ut FFC w ire in order and paste them
ROHS
on the panel
4.Fix chassis on the back of panel
47
Acer
Acer –LCD-X163W
Assembly and Disassembly (continue)
S11
Insert
lamp wire
Thread lamp wire into the relevant hole of
chassis like the attached Picture
S12
Assemble
keypad
Assemble keypad as picture
S13
Assemble
cover
back and
stand
Check if back cover and stand is fixed
properly
S14
Packing
cushion
PCBA,KEYPAD
790071500000R BOARD,LE1973
ROHS
714011204100R stand le15F9
put the monitor into the cushion as picture 506060011210R
48
CUSHION,
LEFT, LE15F9