Transcript
ProSpec® Track Lighting System Page 1 of 1 26890 ProSpec® Recessed Flangeless Monopoint 6 A A 5 10 1/4 [259.7] 3 3/8 [85.7] 3 7/16 [86.6] 4 1/4 [108.2] SECTION A-A 9 9/16 [242.9] 2 7 1/16 [179.4] 5 9/16 [141.6] 3 13/16 [97.3] 1.33 1 Ordering Information Catalog No. Finish Mounting Compatibility 26890WH 26890BK Matte White Matte Black Intended for recessing into drywall type ceilings with plaster skim coat. Accommodates ceiling thicknesses of 1/2" to 3/4". ProSpec track luminaires, 500W Max. NOT FOR USE with ProSpec PAR56 or PAR64 track mounted units. Features 1. ProSpec Track Strip: Structural aluminum extrusion; average wall thickness 0.08". 2. Mounting Frame: .012" thick galvanized corner bead. Allows for finished plaster edge. 3. Insulated Liner: 0.040 wall high temperature extruded thermoplastic. 4. Conductors: “U” shaped copper conductor; increases contact surface and minimizes contact resistance; provides reliable positive connection. 5. Mounting Brackets: 18 ga. galvanized steel. Adjustable to accommodate 1/2" to 3/4" ceiling thicknesses. 6. Knockouts: Allows power feed from above using 3/8" or 1/2" (trade size) connector (by others). Finish All painted finishes are baked enamel. Electrical (2) circuits. Each circuit is 120V, 60 Hz. Each circuit has dedicated neutral for maximum control flexibility. Track is continuously grounded throughout. Electrical conductors are concealed in an insulated liner in the track. Intended for wiring to branch circuit building wire with ground, in accordance with national and local codes. Labels cULus Job Information Type: Job Name: Cat. No.: Lamp(s): Notes: Lightolier a Genlyte company www.lightolier.com 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. © 2005 Genlyte Group LLC • 0505