Transcript
Product information 36v LXT SDS-PLUS Rotary Hammer Satisfying the professional’s needs BHR261RDE Noise sound pressure 91 dB(A) Impact energy per stroke Battery Type 2.5 Js Lithium-Ion Vibration: Drilling 3 m/sec² Charging Time 22 min Vibration K factor Vibration: Hammer Drilling 1.5 m/sec² 13.5 m/sec² Max. in masonry No Load Speed 26 mm 0 - 1200 rpm Vibration: Chiselling 11 m/sec² Max. in steel 13 mm Max. in wood 32 mm Blows per minute 0 - 4800 bpm STANDARD EQUIPMENT: 194873-2 36V Li-ion Battery, DC36RA 36V BATTERY CHARGER ● 22 minute charge time with the air cooled Makstar Optimum Charging System. ● Conveniently located push button for forward and reverse. ● High comfort grips. ● Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time. ● Lithium-ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery. ● LED job light with afterglow. ● Triple operation mode: Rotary only, hammer only and rotary hammer. ● Rotation mode: The chisel can rotate a full 360 degrees with 40 different locking positions. ● Vibration absorbing handle reduces hand fatigue. ● One-touch sliding chuck for easy bit changes. ● Torque limiter: The drill stops when the bit hits against reinforcements. Details correct as of: 5-11-2012 Makita reserve the right to change specifications at any time owing to their policy of constant improvement. Accessories shown are not necessarily supplied. www.makitauk.com