Transcript
S P E C F I L E ET-PKD100H Ceiling mount bracket for high ceilings Description This ceiling mount bracket is to be used when mounting Panasonic projectors to the ceiling. Specifications Vertical correction angle: Horizontal slant correction angle: Horizontal turn correction angle: Dimensions (W x H x D): +5°, -17° ±2.5° ±1.2° 536 x 416.5 – 536.5 x 425 mm (21-3/32˝ x 16-13/32˝–21-1/8˝ x 16-23/32˝) 16.6 kg (36.6 lbs) Weight: Weights and dimensions shown are approximate. Specifications subject to change without notice. Parts Attachment plate . . . . . . Projector mount bracket . Adjuster poles . . . . . . . . . Angle adjuster . . . . . . . . . Pole support bracket 1 . . Pole support brackets 2 . Pole fixer . . . . . . . . . . . . . Hexagonal bolt (M6 x 110) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 2 1 1 2 1 1 Spring washer (M6) . . . . . Nut (M6) . . . . . . . . . . . . . . Washer-fitted hex bolts (M6 Sealing packing . . . . . . . . Washer-fitted hex bolts (M6 Washers (M6) . . . . . . . . . . Hex nuts (M6) . . . . . . . . . . Sealing packing . . . . . . . . ..... ..... x 12) ..... x 25) ..... ..... ..... ... ... .. ... .. ... ... ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . 1 36 . 1 . 5 . 2 . 2 . 1 Caution: Mounting should be done by a qualified technician. Make sure that the mounting (ceiling) area has sufficient strength. Read the enclosed mounting instructions thoroughly before starting. 290 (11-13/32˝) 344 (13-17/32˝) 200 (7-7/8˝) 314 (12-3/8˝) Attachment plate 581–701 (22-7/8˝–27-19/32˝) Ø60.5 (Ø2-3/8˝) 416.5–536.5* Attachment plate (16-13/32˝–21-1/8˝) Dimensions Illustration shows the ET-PKD100H attached to the projector. * Adjustable in 40-mm (1-9/16˝) steps. Projector 175 62.5 (6-7/8˝) 200 (2-15/32˝) 50 (7-7/8˝) (1-31/32˝) 344 (13-17/32˝) (2-1/8˝) 54 300 (11-13/16˝) 87.5 (3-7/16˝) 150 Attachment plate (5-29/32˝) 440 (17-5/16˝) As of December 2006 unit : mm (inch) NOTE: This illustration is not drawn to scale. < 1 >