Download Craftsman 917.377830 Owner`s manual
Transcript
Owner's Manual £RRFTSMnll° 6.0 HORSEPOWER 22" REAR DISCHARGE POWER PROPELLED ROTARY LAWN MOWER Model No. 917.377830 • ° ° e Safety Assembly Operation Maintenance o , EspaSoi Repair Parts CAUTION: Read and follow all Safety Rules and Instructions before operating this equipment Sears, Roebuck and Co., Hoffman Estates, IL 60179 Visit our Craftsman webslte:www,sears,com/craftsman Warranty Safety Rules Assembly Operation Maintenance Schedule Maintenance 2 2 4 6 10 10 Product Specifications Service and Adjustments Storage Troubleshooting Repair Parts Parts Orderin, 11 14 16 t7 37 Back Cover LIMITED TWO YEAR WARRANTY ON CRAFTSMAN POWER MOWER For two years from date of purchase, when this Craftsman Lawn Mower is maintained, lubricated, and tuned up according to the operating and maintenance instructions in the owner's manual, Sears will repair free of charge any defect in material or workmanship, If this Craftsman Lawn Mower is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase. This Warranty does not cover: • Expendable items which become worn during normat use, such as rotary mower blades, blade adapters, belts, air cleaners and spark plug. , Repairs necessary because of operator abuse or negligence, including bent crankshafts and the failure to maintain the equipment according to the instructions contained in the owner's manual. Warranty service is available by returning the Craftsman power mower to the nearest Sears Service Center/Department in the United States. This warranty applies only while thts product is in use in the United States. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. SEARS, ROEBUCKAND CO., D/817 WA, HOFFMAN ESTATES, ILLINOIS 60179 Safety standard's requ!re.operator presence controls to rntm_mlze the risk of injury. Your unit is equipped with such controls. Do not attempt to defeat the function of the operator presence controls under any circumstances. ° Do not operate mower if it has been dropped or damaged in any manner. Always have damage repaired before using your mower. o Do not use accessory attachments that are not recommended by the manufacturer° Use of such attachments may be hazardous. o The blade turns when the engine is running. TRAINING: • Read this operator's manual carefully. Become familiar with the controls and know how to operate your mower properly. Learn how to quickly stop mower. ° Do not allow children to use your mower. Never allow adults to use mower without proper instructions. ° Keep the area of operation clear of all persons, especially small children and pete. • Use mower only as the manufacturer Intended and as described in this manual. PREPARATION: ° Always thoroughly check the area to be mowed and clear it of all stones, sticks, wires, bones, and other foreign objects. These objects will be thrown by the blade and can cause severe Injury, ° AIways wear safety glasses or eye shfelds when starting and while using your mower. 2 o Dress properly. Do not operate mower when barefoot or wearing open sandals. Wear only solid shoes with good traction when mowlng. - Check fuel tank before starting engine. Do not fill gas tank indoors, when the engine is running or when the engine is hot. Allow the engine to cool for severaf minutes before filling the gas tank. Clean off any spilled gasoline before starting the engine. o Always make wheel height adjustments before starting your mower. Never attempt to do this while the engine is running_ • Mow only in daylight or good artificial light. OPERATION= • Keep your eyes and mind on your mower and the area being cuL Do not let other interests distract you° - Do not mow wet or slippery grass, Never run while operating your mower. Always be sure of your footing - keep a firm hold on the handles and walk. o Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times. ° Always stop the engine whenever you leave or are not using your mower, or before crossing driveways, walks, roads, and any gravel-covered areas. • Never direct discharge of material toward bystanders nor allow anyone near the mower while you are operating lto o Before cleaning, inspecting, or repairing your mower, stop the engine and make absolutely sure the blade and all moving parts have stopped_ Then disconnect the spark plug wire and keep it away from the spark plug to prevent accidental starting. • Do not continue to run your mower if you hit a foreign object. Follow the procedure outlined above, then repair any damage before restarting and operating your mower. • Do not change the govemor settings or overspeed the engine. Engine damage or personal injury may result. , Do not operate your mower if it vibrates abnormally, Excessive vibration is an indicalion of damage; stop the engine, safely check for the cause of vibration and repair as required. o Do not run the engine indoors° Exhaust fumes are dangerous. • Never cut grass by pulling the mower towards you_ Mow across the face of slopes, never up and down or you might lose your footing. Do not mow excessively steep slopes. Use caution when operating the mower on uneven terrain or when changing directions - maintain good footing. • Never operate your mower without proper guards, plates, grass catcher or other safety devices in place. MAINTENANCE AND STORAGE: ° Check the blade and the engine mounting bolts often to be sure they are tightened properly. o Check all bolts, nuts and screws at frequent intervals for proper tightness to be sure mower is in safe working condition. o Keep all safety devices in place and working, • To reduce fire hazard, keep the engine free of grass, leaves or excessive grease and oil. . Check grass catcher often for deterioration and wear and replace worn bags. Use only replacement bags that are recommended by and comply with specifications of the manufacturer of your mower. ° Always keep a sharp blade on your mower. ° Allow engine to cool before storing in any enclosure. ,, Never store mower with fuel in the tank inside a building where fumes may reach an open flame or an ignition source such as a hot water heater, heater, CAUTION. Always p_gpaCe clothes disconnect dryer, etc. spark wire and place wire where it cannot contact spark plug in order to prevent accidental starting when setting up, transporting, adjusting or making repairs. WAR,NING engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Theseaccessorieswereavailablewhenthislawnmowerwasproduced.They arenot shippedwith your mower. They are also available at most Sears retail outlets and se_ce centers. Most Sears stores can also order repair parts for you, when you provide the model number of your lawn mower_ Some of these accessories may not apply to your lawn mower. LAWN MOWER PERFORMANCE ,,.J_ CLIPPING DEFLECTOR FOR RE,AR DI,SC,HARGE,,LAWN MOWERS MULCHER KITS FOR FOR SIDE DISCHARGE GRASS LAWN CATCHERS MOWERS REAR DISCHARGE _ STABILIZER 1,1 GRASSCATCHERS LAWN MOWERS GAS CANS ................ , ,,,,,,,,,,,,, ,,,, LAWN MOWER MAINTENANCE @ MUFFLERS, BELT8 in , u i SPARK PLUGS AIR FILTERS , i BLADES BLAOE ADAPTERS Read these instructions and this manual in its entirety before you attempt to assemble or operate your new lawn mower. IMPORTANT: This lawn mower is shipped WITHOUT OILOR GASOLINE tn the engine° Your new lawn mower has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your lawn mower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessan/to ensure proper tightness. All parts such as nuts, washers, bolts, etc., necessary to complete the assembly have been placed in the parts bag° WHEELS ENGINE OIL TO REMOVE LAWN MOWER FROM CARTON • Remove loose parts includedwith mower. • Cut down two end comers of carton and _ayend panel down flat. • Remove all packing materials except padding between upper and lower handle and padding holding operator presence control bar to upper handle. ° Rdl lawn mower out of carton and check carton thoroughly for additional loose parts, HOWTO SET UP YOUR LAWN MOWER TO UNFOLD HANDLE IMPORTANT: Unfold handles carefully so as not to pinch or damage control cables • Raise handles until lower handle section locks into place in mowing position. = Remove protecf_vepadding, raise upper handle section Into place on lower handle and tighten both handle knob& 4 • Remove handle padding holding operator presence control bar to upper handle. o Your lawn mower handle can be adjusted for your mowing comfort. Refer to "Adjust Handle" in the Sercice and Adjustment section of this manual. Operator bar d_IbCAUTION: Do not run your lawn mower without mulcher plug in place or approved clipping deflector or grass catcher in place. Never attempt to operate the lawn mower with the rear door removed or propped open. TO PREPARE BATTERY NOTE: Your battery must be charged before you can start your lawn mower. ° Disconnect engine battery connector (male) from battery connector (female) • Connect battery charger connector (male) to battery connector (female). • Plug battery charger into 110 volt A.C. outlet. ° Leave battery charger connected for 24 hours before starting your engine for the first time. , After charging, connect engine connector (male) to battery connector (female), Your engine has an integral alternator for partial charging. Connect your battery charger to charge battery as required. IMPORTANT: The engine alternator will not charge a discharged battery. At the end of the mowing season the battery should be charged for 48 hours to protect the battery during winter storage. _b.OAUTION: Always disconnect the engine connector (male) from the battery connector (female) to prevent accidental starting when transporting or storing your lawn mower after the season. presence control Upper handle Jff up Mowing position / Lower handle TO INSTALL ATTACHMENTS Your lawn mower was shipped ready to be used as a mulcher. To convert to bagging or discharging: • Open rear door and remove mulcher plug. Store mulcher plug in a safe place. ° You can now install catcher or optional clipping deflector, , 1"o return to mulching operation, install muicher plug into discharge opening of mower. Engine connector (male) Mulcher plug % Battery charger Battery connector (female) 5 Battery charger connector (male) KNOW YOUR LAWN MOWER READ THIS OWNER'S MANUALAND SAFETY RULrES BEFORE OPERATING YOUR LAWN MOWER, Compare the illustrations with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this manual for future i rl, ii ,111 , ,,i,,_.111 _ _ These symbols may appear on your lawn mower or in literature supplied with the product. Learn and understand their meaning, CAUTION OR WARNING i1,1 F..NGINt_ ON FAST F.,NGtNE OFF 8LOW CHOKE FUEL OIL , ,,,,,, DANGER, KEEP HANDS AND FEET AWAY ,,, ,,,, ,,,,,,,,,,, ,111 Engine zone control cable presence control bar Drive control lever Auxiliary starter handle Key" start switch Grass catche_ Handle knob oil cap w/dipstick Housing Mulcher plug Gasoline filler Primer Drive cover IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine, i MEETS U['l 1,1[11111 CPSC SAFETY , Wheel adjuster ('on every wheel) , u I i,iii1,11,11 REQUIREMENTS Sears rotary walk-behind power lawn mowers conform to the safety standards of the American National Standards Institute and the US. Consumer Product Safety CommissTon. The blade turns when the engine is running. ,11,11, i ,, i q!lll! ! : _m- Drive control lever - used to engage power-prope!Ied forward motion of lawn mower. Mulcher plug - must be removed to convert to bagging or discharging operation. Key start switch - used for starting the engine. Operator presence control bar - must be held down to the handle to start the engine. Release to stop the engine, Primer - pumps additional fuel from the carburetor to the cylinder for use when starting a cold engine, Auxiliary starter handle- used for starting the engine, 6 - TO ATTACH The operation of any lawn mower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your lawn mower or performing any adjustments or repairs, We recommend a wide vision safety mask over spectacles or standard safety glasses. SPEED CAUTION; Do not mower without clipping approved grass catcher attempt to operate the the rear door removed The engine speed was set at the factory for optimum performance, Speed is not adjustable, ENGINEZONE CONTROL _CAUTION= Federal regulations require an engine control to be installed on this lawn mower in order to minimize Hinge bracket the risk of blade contact injury_ Do not under any circumstances attempt to defeat the function of the operator control, The blade turns when the engine Is running. Your lawn mower ts equipped with an operator presence control bar which requires the operator to be positioned behind the lawn mower handle to start run your lawn deflector or in place. Never lawn mower with or propped open, door Grass catcher frame tabs TO EMPTY GRASS CATCHER ° To remove grass catcher, release operator presence control bar to stop engine. , Lift up rear door and remove the grass catcher by the handle. NOTE: Do not drag the bag when emptying; it will cause unnecessary wear. and operate the lawn mower. TO ADJUST CUTTING HEIGHT • Raise wheels CATCHER • The grass catcher is secured to the lawn mower housing when the rear door is lowered onto the grass catcher frame. HOWTO USEYOUR LAWN MOWER ENGINE GRASS • Close the lift top lid. Lift top lid must be closed while operating lawn mower. - Lift the rear door on the mower housing and place the grass catcher frame onto the formed tabs on the rear door hinge bracket. for low cut and lower wheels for high cut. ° Adjust cutting height to suit your requirements. Medium position is best for most lawns. • To change cutting height, squeeze adjuster lever toward wheel, Move wheel up or down to suit your require -= mentso Be sure all wheels are in the same setting_ NOTE: Adjuster is properly positioned when plate tab inserts into hole in lever. Also, 9-position adjusters (if so equipped) allow lever to be positioned between the plate tabs. Lower Wheefs for High Cut Plate Tab Raise Wheels for Low Cut 7 DRIVE CONTROL • Self-propelling is controlled by holding the operator presence control bar down to the handle and pushing the drive control lever forward until it clicks; then release the drive control lever_ • Forward motion wi{I stop when the operator presence control bar is released. To stop forward motion without stopping engine, release the operator presence control bar slightly until the drive control disengages. Holcl operator presence control bar down to handle to continue mowing without selfpropelling. o To keep ddve control engaged when turning comers, push down on handle and lift front wheels off ground while tuming lawn mov_l_rato r presence control bar '_, \_ Drive "" control _._ _ Drive control Drive control To engage ddve control BEFORE STARTING ENGINE "disengaged OIL Your lawn mower is shipped without oil in the engine. • Be sure mower is level and area around oi_ fill Is clean. ° Remove engine oil cap and fill to the full line on the dipstick. NOTE: Allow oil to settle down into engine for accurate dtpstick reading. ° Engine holds 20 ozs. of oil For type and grade of oil to use, see "ENGINE" in Maintenance section of this manual. ° Pour oil stowly. Do not over fill. • Check oil level before each use. Add oil if needed. Fill to full line on dipstick. ° To read proper lever, tighten engine oi{ cap each time. ° Reinstall engine olt cap and tighten. • Change the oil after every 25 hours of operation or each season. You may need to change the oil more often under dusty, dirty conditions. GAS • Fill fuel tank. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. Do not mix oil with gasoline. Purchase fuel In quantities that can be used within 30 days to assure fuel freshness. WARNING: Experience indicates that hol blended fuels (called gasohot or using ethanol or methanol) can attract moisture which leads to separation and formal]on of acids during storage. Ack_licgas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season, See Storage tnstructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur. TO START ENGINE • To start a ce{d engine, push prfmer three (3) times before trying to start. Use a firm push. This step is not usually necessary when starting an engine which has already run for a few minutes. • Hold operator presence control bar down to the handle. • Turn e_ectricstart key clockwise to crank engine. IMPORTANT: Do not crank engine more than five continours seconds between eahc time you try to start. Wait 5 to 10 seconds between each attempt. . To start engine using the auxiliary starter hand{e, foIIow the steps above. Exchange the use of the start key for starter handle. Pull starter handle quickly. Do not altow starter rope to snap back. o To stop engine, release operator presence control bar. NOTE: In cooler weather it may be neces., san] to repeat priming steps. In warmer weather over pdming may cause llooding and englne will not start. If you do flood engine wait a few minutes before attempting to start and do not repeat priming steps. Gasoline t_ller cap (Discard debris plug inside) Engine oil cap MULCHING MOWING TIPS MOWINGTIPS • Under certain conditions, such as very tall grass, it may be necessary to raise the height of cut to reduce pushing effort and to keep from overloading the engine and leaving clumps of grass clippings. It may also be necessary to reduce ground speed and/or run the lawn mower over the area a second tlmeo • For extremely heavy cutting, reduce the width of cut by overlapping previously cut path and mow siowlyo • For better grass bagging and most cutting conditions, the engine speed should be set in the fast position. • When using a rear discharge lawn mower tn mofst, heavy grass, clumps of cut grass may not enter the grass catcher. Reduce ground speed (pushing speed) and/or run the lawn mower over the area a second time. • If a trall of clippings is left on the right side of a rear discharge mower, mow in a clockwise direction with a small overlap to collect the clippings on the next pass. ° Pores in cloth grass catchers can become filled with dirt and dust with use and catchers will collect less grass. To prevent this, regularly hose catcher off with water and let dry before using. = Keep top of engine around starter clear and clean of grass clippings and chaff. This will help engine air flow and extend engine life. IMPORTANT: For best performance, keep mower housing free of built-up grass and trash. See "Cleaning" in MAINTENANCE section of this manual. ° The special mulching blade will recur the grass clippings many times and reduce them in size so that as they fall onto the lawn they will disperse into the grass and not be noticed, Also, the mulched grass will biodegrade quickly to providenutrients for the lawn. Always mulch with your highest engine (blade) speed as this will provide the best recurring action of the blades. o Avoid cutting your lawn when It iswet. Wet grass tends to form clumps and interferes with the mulching action. The best time to mow your fawn is the eady aftemoonoAt this time the grass has dded and the newly cut area will not be exposed to the direct sun. ° For best results, adjust the lawn mower cutting height so that the lawn mower cuts off only the top one-third of the grass blades, If the lawn is overgrown it will be necessary to raise the height of cut to reduce pushing effort and to keep from overloading the engine and leaving clumps of mulched grass. For extremely heavy mulching, reduce your width of cut by overlapping previously cut path and mow slowly. ° Certain types of grass and grass conditions may require that an area be mulched a second time to completely hide the clippings° When doing a second cut, mow across or perpendicular to the first cut path. ° Change your cutting pattern from week to week. Mow north to south one week then change to east to west the next week. This will help prevent matting and graining of the lawn. Max. 1/3 9 MAINTENANCE SCHEDULE FILL IN DATES AS YOU COMPLETE REGULAR SERVICE M O SERVICE DATES Chock for Loose Fasteners Clean/inspect Grass Catcher (If Equipped) Clean Lawn Mower v' v' v'_v' E_ v" N v' Groan (Power-Propelled I..Indor DriveMowers) Cover Chock drive belt/pulleys v' v'3 RE (Power-Propelled Mowers} ChecktSharpen/Replace Blado Lubrication Chart Clean Battery/Recharge (E ectdo Start Mowers) ........... , Check Engine Oil Level v' N !Change Engine oil G €_eanAlr,Filte,r ..................... Inspect Clean or Muffler Replace Spark Plug i,,'4 v' v"2 • J E episgA,. .erP p rCa.t.d .......,;! t V' 1_ :, ! - Change mo_e often when operating under a heavy toad or tn high ambient temperatures 2 - Servicemote of{onwhen operatingtndirtyor dusty eond111or, s. 3 -Repiace blades more often when mowing Insandy soil, 4 - Charge 48 hours el and of season. GENERAL LUBRICATION CHART RECOMMENDATIONS Wheel Adjuster The warranty on this lawn mower does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain mower as instructed in this manual. Some adjustments will need to be made periodically to properly maintain your unit. All adjustments in the Service and Adjustments section of this manual should be checked at least once each season. ° Once a year, replace the spark plug, replace air filter element and check blade for wear. A new spark plug and clean/new air filter element assures proper air-fuel mixture and helps your engine run better and last longer. • Follow the maintenance schedule in this manual BEFORE EACH gtne oil (_) Rear door hinge (_) Handle bracket mounting pin (_) Spay lubricant Refer to MAINTENANCE section. USE • Check engine oil level. • Check for loose fasteners. LUBRICATION "ENGINE" IMPORTANT; Do not oit or grease plastic wheel bearings. Viscous lubricants Keep unit well lubricated (See "LUBRICATION CHART"). will attract dust and dirt that will shorten the life of the self lubricating bearings. If you feel they must be lubricated, use only a dry, powdered graphite type lubricant sparingly. 10 PRODUCT SPECIFICATIONS 917.377830 MODEL NUMBER SERIAL NUMBER DATE OF PURCHASE 6.0 HORSEPOWER: GASOLINE O1LTYPE CAPACITY/TYP 1.6 QUARTS UNLEADED E: SAE 30 (ABOVE 32°F) SAE 5W-30 (BELOW 32°F) (API-SF/SG/SH): OIL CAPACITY: 20 OZS. SPARK PLUG(GAP: CHAMPION .030") , SOLID STATE IGNITION AIR GAP: .005" - .007" ,007" - .009" ,I,,L 35-40 F]'. LBS. The m0del and sedal numbers wilt be found both serial on a decal attached number and date io ihe rear Of the of purchase }n space o Remove blade and attaching hardware (bolt, lock washer and hardened washer). NOTE: Remove the blade adapter and check the key inside hub of blade adapter. The key must be in good condition to work properly. Replace adapter if damaged. MOWER Always observe performing any TIRES , OR J19LM .010 IN. BLADE BOLTTORQUE: lawn mower housing.Record 3rovided above, RJ19LM INTAKE: EXHAUST: VALVE CLEARANCE: LAWN REGULAR safety rules when maintenance. o Keep tires free of gasoline, oil, or insect control chemfcats which can harm rubber. • Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage., BLADE CARE TO REPLACE BLADE ° Position the blade adapter on the engine crankshaft. Be sure key in adapter and crankshaft keyway are aligned. ° Position blade on the blade adapter aligning the two (2) holes in the blade with the raised lugs on the adapter. • Be sure the trailing edge of blade (opposite sharp edge) is up toward the engine. ° Install the blade bolt with the lock washer and hardened washer into blade adapter and crankshaft. ° Use block of wood between blade and lawn mower housing and tighten the blade bott, turning cfockwlse. o The recommended tightening torque is 35-40 ft. lbs. For best results, mower blade must be kept sharp. Replace bent or damaged blades. TO REMOVE BLADE • Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with spark plug. • Turn lawn mower on tts side, Make sure air filter and carburetor are up_ • Use a wood block between blade and mower housing to prevent blade from turning when removing blade bolt, • Protect your hands with gloves and/or wrap blade with heavy cloth. ° Remove blade bolt by turning counterclockwise. 11 • Remove hubcaps, hairpin cotters and washers. • Remove wheels from wheel adjusters. • Remove any trash or grass cuttings from inside the dust cover, pinion and/ or drive wheel gear teeth. - Put wheels back in place. ° If after cleaning, the drive wheels do not turn freely, contact your nearest authorized service center. GEAR CASE IMPORTANT: Blade bolt is grade8 heat treated. TO SHARPENBLADE NOTE: We do not recommend sharpening blade - but if you do, be sure the blade is balanced. Care should be taken to keep the blade balanced. An unbalanced blade will cause eventual damage to lawn mower or engine. o The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower. * To check blade balance, drive a nail into a beam or wall. Leave about one inch of the straight nail exposed. Piace center hole of blade over the head of the nail. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced. Crankshaft keyway Blade ada )tar Blade Key ._._ :.,-_ bolt ' Hardened washer T g edge ° To keep your drive system working properly, the gear case and area around the drive should be kept clean and free of trash build-up. Clean under the drive cover twice a season. • The gear case is filled with lubricant to the proper level at the factory. The only tlme the lubricant needs attention is if service has been performed on the gear case. - If lubricant is required, use only Texaco Starplex Premium 1 Grease, Part No° 750369. Do not substitute. ENGINE LUBRICATION -../ i&i'-:_',,_ Crack. Use only high quality detergent oit rated with API service ciassificalion SF,, SG or SH. Setect the oil's SAE viscosity grade according to your expected operating temperature. Blade adapter TI_'MPERA_URE RANGE ANTICIPATED GRASS CATCHER , The grass catcher may be hosed with water, but must be dry when used. ° Check your grass catcher often for damage or deterioration. Through normal use it will wear. If catcher needs replacing, replace only with a manufacturer approved replacement catcher. Give the lawn mower model number when ordering. DRIVE WHEELS Check front drive wheels each time before you mow to be sure they move freely. The wheels not turning freely means trash, grass cuttings, etc. are in the drive wheel area and must be cleaned to free drive wheels. If necessary to clean the drive wheels, check both front wheels. BEFORE NEXT OIL CHANGE NOTE: Although multi-viscosity oils (5W30, 10W30 etc,) improve sta_ng in cold weather, these multi*viscosity oils will result in increased oil consumption when used above 32°F. Check your engine oil level more frequently to avoid possible engine damage from running low on oil. Change the oil after every 25 hours of operation or at least once a year if the lawn mower is not used for 25 hours in one year. Check the crankcase oil level before starting the engine and after each five (5) hours of continuous use. Tighten oil plug securely each time you check the oil level. 12 TOCHANGEENGINEOIL Back NOTE: Beforetippinglawnmowerto drain oil,drainfueltankby runningengineuntilfuel tankisempty. • Disconnect sparkplugwirefromspark plugandplacewirewhereit cannotcome Incontactwithsparkplug. - Removeengineoilcap;layasideon a cleansurface. • l]p lawnmoweron itssideas shownand drainoilintoa suitablecontainer.Rock lawnmowerbackandforthto removeany oil trappedinsideof engine, - Wipeoffanyspilledoflonlawnmowerand on sideof engine. • Fill engine with oil Fill only to 'dqe"FULL" line on the dipstick. DO NOT overfill. _, Replace engine oll cap. ° Reconnect spark plug wire to spark plug. Slots Cover tabs Cartridge Cover MUFFLER inspect and replace corroded muffler as it could create a fire hazard and/or damage. SPARKPLUG Change your spark plug each year to make your engine start easier and run better. Set spark plug gap at .030 inch. CLEANING IMPORTANT: For best performance, keep mower housing free of built-up grass and trash. Clean the underside of your mower after each use. lj.Contatner &CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with the spark plug. • "rumlawn mower on its side.. Make sure air filter and carburetor are up. Clean the underside of your lawn mower by scraping to remove buildup of grass and trash. o Clean engine often to keep trash from accumulating. A dogged engine runs hotter and shortens engine llfe. • Keep finished surfaces and wheels free of al! gasoline, oil, etc, ° We do not recommend using a garden hose to clean lawn mower unless the electrical system, muffler, air filter and carburetor are covered to keep water out° Water In engine can result in shortened engine fife_ GLEAN UNDER DRIVE COVER Clean under drive cover at least twice a season_Scrape underside of cover with putty knife or similar tool to remove any buildup of trash or grass on underside of drive cover. AIR FILTER Your engine will not run properly and may be damaged by using a dirty air filter. Replace the atr filter every year, more often if you mow in very dusty, dirty conditions. TO CLEAN AIR FILTER = Loosen screw and tilt cover to remove. ° Carefully remove cartridge. • Clean by gently tapping on a flat surface. If very dirty, replace cartridge. as_CAUTION: Petroleum solvents, such erosene, are not to be used to clean cartridge. They may cause deterioration of the cartridge. Do not oil cartridge. Do not use pressurized air to clean or dry cartridge. • Install cartridge, then replace cover making sure the tabs are aligned with the slots In the back plate. Fasten screw securely. 13 AUTION: BEFORE PERFORMING SERVICE OR ADJUSTMENTS: • Release control bar and stop engine. • Make sure the blade and all moving parts have completely stopped. ° Disconnect spark plug wire from spark plug and place where it can not come in contact with plug. LAWN MOWER TO ADJUST CUTTING HEIGHT See "TO ADJUST CUTTING HEIGHT" in the Operation section of this manual. REAR DEFLECTOR The rear deflector, attached between the rear wheels of your lawn mower, is provided to minimize the possibility that objects will be thrown out the rear of the lawn mower into the operator's mowing position. If the rear deflector becomes damaged, it should be replaced. TO REMOVE/REPLACE DRIVE BELT • Remove drive cover. Remove belt by pushing down on gear case pulley and rolling beff off it. • Turn lawn mower on its side with carburetor and fuel cap up. • Remove blade. ° Remove debrls shield._ ° Remove belt from engine pulley on crankshaft. = Instatl new belt by reversing above steps. = Always use factory approved belt to assure fit and long life. Drive cover o To change from medium low to medium hlgh position, the upper and lower handle sections will have to be tumed over. ° Remove the cable dips. • Remove the controls and operator presence control bar from the upper handle. • Remove the starter rope guide from the upper handle. ° Remove hairpin cotters. ° Disconnect the lower handle from the handle brackets. ° Turn the handle over and reassemble the hairpin cotters that have been removed. • Reassemble the starter rope guide. ° Reassemble the controls and the operator resence control bar to the upper handle. CAUTION: The operator presence control bar must pivot freely to permit blade brake engagement when control bar is released. Do not over tighten the fasteners holding the controls to the upper handle. • To change from medium tow to high position only the upper handle section will have to be turned over. o To change from medium low to low position, only the lower handle section wtli have to be turned over. Shipping position Medium low Medium high Belt Push down TO ADJUST Low HANDLE Your lawn mower handie can be raised or lowered for your mowing comfort. Four (4) positions are available: high, medium high, medium low and low. Handles are shipped mounted in the medium low posltlon. 14 Lower" handle Lower Frame Squeeze to remove (Frames must , be fully Handle bracket --7' _ 9 t , -' Hairpin cotter • TO ASSEMBLE Frame GRASS CATCHER o Insert teg of tubular frame through front opening of grass catcher and thread frame into sewn hem of bag. NOTE: Keep bag hem gathered on the straight leg of the tubular frame. , When frame comes out the other end of sewn hem, immediately work the end of frame down inside the bag as shown in inset. ° Slide sewn hem evenly around the tubular frame until both ends of frame are exposed out of the front opening. • Assemble lower frame to tubular frame as shown. Be sure handle is outside of bag and frames are fully seated as shown in inset. • Slip vinyl bindings over frame. NOTE: If vinyl bindings are too stiff, hold them in warm water for a few minutes. If bag gets wet, let it dry before using. ° Close the flip !id. Flip lid must be closed while operating lawn mower. _OAUTION: Do not run your lawn mower without clipping deflector or approved grass catcher in place. Never attempt to operate the lawn mower with the rear door removed or propped open. Lower frame handle "N __bindings ENGINE " "" SPEED Your engine speed has been faclory set, Do not attempt to increase engine speed or it may result in personal injury. If you believe that the engine is running too fast or too stow, take your fawn mower to an authorized service center for repair and adjustment. CARBURETOR Your carburetor is not adjustable. If your engine does not operate properly due to suspected carburetor problems, take your lawn mower to an authorized service center for repair and/or adjustment. IMPORTANT: Never tamper with the engine governor, whtch is factory set for proper engine speed. Overspeeding the engine above the factory high speed setting can be dangerous. If you think the engine-governed high speed needs adjusting, contact your nearest AUTHORIZED service center, which has proper equipment and experience to make any necessary adjustments. Tubular frame ! , Sewn hem J ENGINE Sewn hem t Tubular Flip lid t5 Immediatelyprepareyour tawn mowerfor storageat the end of the seasonor if the unitwill not be usedfor 30 days or more. LAWN MOWER Operator When lawn mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc Store in a clean, dry area. o Clean entire lawn mower (See "CLEANING" in the Maintenance section of this manual). • Lubricate as shown in the Maintenance section of this manual° • Be sure that all nuts, bolts, screws, and pins are securely fastened. Inspect moving parts for damage, breakage and wear, Replace if necessary. ° "Touch up all rusted or chipped paint surfaces; sand lightly before painting. HANDLE You can fold your lawn mower handle for storage. • Squeeze the bottom ends of the lower handle toward each other until the lower handle clears the handle bracket, then move handle forward. • Loosen upper handle mounting bolts enough to allow upper handle to be folded back. IMPORTANT: When folding the handle for storage or transportation, be sure to fold the handle as shown or you may damage the control cables. o When setting up your handle from the storage position, the lower handle will automatically lock into the mowing position. forward for _'_?" Lower handle Handle racket Squeeze to fold Hairpin cotter presence control Upper Handle ---_iJ //,,_ _ sto,age o_=.,_" ,_) Fold backward Mowing Lower handle position ENGINE FUEL SYSTEM IMPORTANT: It Is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel _ter, fuel hose, or tank during storage. Also, experience indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. • Drain the fuel tank. ,, Start the engine and let it run until the fuel lines and carburetor are empty, o Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur. , Use fresh fuel next season. NOTE; Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least t0 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not drain the gas tank and carburetor if using fuel stabilizer. ENGINE OIL Drain oil (with engine warm) and replace with clean engine oil. (See "ENGINE" in the Maintenance section of this manual). CYLINDER ° Remove spark plug, o Pour one ounce (29 ml) of oil through spark plug hole Into cylinder, o Pull starter handte slowly a few times to distribute oil, 16° Replace with new spark plug. = Cover your unit with a suitable protective cover that does not retain moisture. Do not use plastic., Plastic cannot breathe which al!ows condensation to form and will cause your unit to nJsL IMPORTANT: Never cover mower while engine and exhaust areas are still warm. _CAUTION: Never store the lawn mower with gasoline in the tank inside a building where fumes may reach an open flame or spark° Allow the engine to cool before storing in any enclosure. BATTERY Disconnect the battery from the engine connector and charge battery 48 hours. OTHER o Do not store gasoline to another. from one season o Replace your gasoline can if your can starts to rust° Rust and/or dirt in your gasoline will cause problems° = If possible, store your unit indoors and cover it to give protection from dust and dirt, TROUBLESHOOTING CHART PROBLEM Does not start CAUSE CORRECTION 1. 2. 3. Dirty air filter_ Out of fuel Stale fuel. !. 2, Clear_'replace Fill fuel tank. air filter, 3. 4_ Water in fuel. 4. Drain tank and refill with fresh clean fuel. Drain fuel tank and carburetor and refill tank 5. Spark plug wire is disconnected, 5. with fresh gasoline, Connect wire to plug. 6. 7. Bad spark plug. 6, Loose blade or broken blade 7. Replace spark plug, Tighten blade bolt or 8. adapter. Control bar in released 9. position, Control bar defective. replace blade adapter: Depress control bar to handle. 10. Weak Battery !1. Disconnected battery connector. , Loss of power 1. 8. 9. Replace control bar. 10. Charge battery. 11, Connect battery to engine. i Rear of lawn mower housing 1. or cutting blade dragging Poorcut-uneven 2o in heavy grass. Cutting too much grass. 3, Dirty air filter. 4. Buildup of grass, leaves, and trash under mower. 5. Too much oil in engine. 6. Walking speed too fast. 1. Worn, bent or loose btade. 2. Wheel heights 3. Buildup of grass, leaves and trash under mower. uneven. 17 Set to "Higher Cut" position. 2, Set to "Higher Cut" position. 3, Clean/replace air filter. 4o Clean underside of mower housing, & Check oil level, 6, Cut at slower walking speed, 1. Replace blade. Tighten blade bolt, !2. Set all wheels at same 3. height Clean underside mower housing, of TROUBLESHOOTING PROBLEM CHART CORRECTION CAUSE i Excessive vibration = 2_ , ,,,,,,i,, , ,,,, i,,i,,,,,i , ,, Wem, bent or goose blade. 1, Bent engine crankshaft. 2. ,rn,l, Starter rope hard topull ll, Replace blade, "lighten blade boll Contact an authorized service center_ f 1. Engine flywheel brake is on when control bar is released. 1, 2. Bent engine crankshaft. 2. 3. Blade adapter broken. 3, 4. Blade dragging in grass. 4. Depress control bar to upper handle before pulling starter rope. Contact an authorized ser_ce center. Replace blade adapter. Move lawn mower to cut grass or to hard surface. , Loss of drive 1. Drive wheels not turning 2, with drive control engaged, Belt not driving 1, : 2. Adjust or replace drive contro! cable. Put belt on pul{eys or replace belts if broken, Grass catcher not filling (if so equipped) 1. 2, Cutting height too low. Uft on blade worn off. 3, Catcher not venting air. ,,i, Hard to push , i,, ,,i,,, 1. 2. 3. Raise cutting heighL Replace blade. Clean grass catcher. i 1. Grass is too high or wheel 1. Raise cutting height. 2. height is too low. Rear of lawn mower 2. Raise rear of lawn mower housing or blade dragging housing one (1) setting 3, in grass. Grass catcher too full. 3, higher, Empty grass catcher, 4. Handle height position not 4. right for you. 18 , ,i,,i, Adjust handle height to suiL ,liJJJJ,, Garantfa Reglas de Seguridad MontaJe Operaci6n Mantenlmlento Programa de Mantenlmiento 19 19 21 23 27 27 Especfficacianes del Producto Servlcio y Adjustes Almacenamiento ldentificaci6n de problemas Partes de repuesto Orden de Partes GARANTIA LIMITADA DE DOS AI_IOS PARA LA SEGADORAA 28 31 33 34 Vea e{ manual ingl6s del duefio Contratapa MOTOR CRAFTSMAN Per dos (2) aSos, a partir de la fecha de compra, cuando esta Segadora Craftsman se mantenga, lubfique y afine segt_n les tnstrucck_nespara la operacl6n y e! mantenlm_ento en e! manual det duefio, Sears reparar_ gratis todo defecto en el material y la mane de obra, Si 1aSegadora Craftsman se usa para fines comerciales o de arrlendo, esta garantla s61ose aplica per novenla (90) d_as a parlir de la fecha de compr& Esta Garantfa no cubre: e Art[culas que se desgastan durante el use norma! tales come las cuchillas segadoras rotatorias, los adaptedores de la cuchilla, tes co[Teas, {os fiitros de afre y las bujias. . Reparaciones necesarias debido al abuse o a la negllgencia del operador, inclw6ndose a los clg0e_TJesdoblados y a la fa_ de mantenlmtento del equipo seg0n las instrucciooes que se incluyen en el manual del dueSo. EL SERVIC10 DE GARANT(A ESTA DISPON1BLE al devoiver 1asegadpra a motor Craftsman al cenl_cY depar_ento de servtcio Sears mas cercano en los Eslados Unidos.. Esta garant[a se aplica selamente mlentras el producto este en Liso en ]os Estados Unidos.. Esta Garantla le otorga derechos legales especflicos, y puede que _rnbl_n tenga otros derechos que var[an de estado a estado. Sears, Roebuck and Co,, D/817WA, Hoffrnan Estates, IL 60179 USA Los estandrares de seguridad exigen la presencla del operator en los controles para reducir a un mtntmo el desgo de lestonarse, Su unidad viene equipada con dtchos contreles. Par nlngun mo_o Irate del etlminar la funci6n de los controles que exigen la presencta del opemdor_ ENTRENAMIENTO: . Lea este manual det operador cuidadoeamenteo Fam[ltar/cese con los conlroles y aprenda a operar su segadom en forma adecuad& Aprenda a parar su segadora r,_pidamente, • No permita que los niRos usen su segadora. Nunca permita que los adultos operen la segadora sin contar con las lnstrucdones adecuadas. • Mantanga et _rea de operact6n despejada de genre, especlaJmente de nifies pequefios y de animales dom6sl_cos. • Use la segadora solamente para los fines propuestos per ef fabficante y segOn tas expltcaciones descritas en este manual ° No apere la segadora sl se ha cafdo o dafiado en cualqulera forrna Siempre repare los dafios antes de usada • No use aceesofios que no hayan side recomendados per el fabflcante El use de dichos accesorios puede ser pellgroso , La cuchilla gira cuando el motor est_ funcionando. PREPARACl6N: . Siempre revise cutdadosamente el _rea que se va a segar y desp6jela de todas las piedras, palos, alambres, huesos y otros abjetos extra_os_ Estos objetos serAn lanzados con ta cuchilla y pueden productr lesiones graves. • Siempre use anteojos de seguridad o protectores de ojos cuando arranque y durante el tiempo que use la segadora. 19 ° Vfstase en forma adecuadao No opere ta segadora sin zapatos o con sandalias abiertaso Use solamente zapatos s611dos con buena traccl6n cuando s[egue. • Revise el estanque de combustible antes de hacer arrancar el motor. No Ilene el estanque de gasoltna en recintos cerrados, nl cuando el motor est& funclonando o cuando est_ caltente. Permtta que el motor se enfrfe per varies mlnutos antes de Itenar et estanque de gasolina. Llmpte toda la gasolina derramada antes de hacer arrancar el motor. - Siempre haga los ajustes de altura de las ruedas antes de hacer arrancar su segadora. Nunca trate de hacer 6sto mientras que el motor esi& funcionando. • Slegue siempre durante el dfa o con buena luz artificial OPERACI6N: o No haga funcienar et motor en recintoscerrados. Los gases do escape son peligrosos.. . Nunca corte el c_sped tlrando la segadora hacia usted. Slegue a tray,s de la cam de las pendtentes, nunca hacla arrlba o hacla abajo puss puede perder el equtlibrto. No slegue pendlentes demaslado emptnadas. Tenga cutdado cuando opere la segadora en terreno dispareJo o cuando cambie de direccI6n- mantenga un buen equilibrio. • Nunca opere la segadora sin tas protecctones adecuadas, las planchas, el recogedor de c@spedy otros dtspositivos de seguridad en su lugan MANTENIMIENTO Y ALMAOENAMIENTO: •Revtse la cuchilla y los pemos de montaje del motor a menudo, para asegurarse que est_n apretados en la forma adecuada. • Revise todos los pemos, tuercas y tomitlos a tntewalos frecuentes, para vertficar si est_n apretados en forma adecuada, y asegurarseque la segadora se encuentra en condiciones de funcionamlento seguro. ° Mantenga todos los dispositivos de seguridad en su lugar y listos para funcionar. . Para reducir el peligro de incendio, mantenga el motor sin c_sped, hojas y grasa o acelte en exceso.. . Revise et recogedor de c6sped a menudo para verlficar st hay deterioro y desgaste y cambie las bolsas desgastadas, Use solamente las bolsas de repuesto recomendadas per el fabficante de su segadora o que cumplen con las especlflcaclones de _ste. ° Siempre mantenga una cuchltla afilada en su segadora. ° Stempre permita que et motor se enfrt'e antes de guardada en cualquier rectnto cerrado. o Nunca guarde la segadora con combustible en el estanque dentro de un edificio en deride los gases pueden alcanzar una llama expuesta o una fuente de ignici6n, tal come e! calentador de agua, la estufa de cafefacci6n, la secadora de ropa, etc. • Mantenga sus ojos y su mente en la segadora yen el ._rea que se est,. cortando, No permita que otros intereses lo dtstralgan. • No corte c_sped mojado o resbaloso. Nunca corm mlentras est_ operando su segadora. Siempre asegdrese de mantener el equillbrio mantenga et mango agarrado firrnemente y camtne. • No ponga las manes 0 los pies cerca odebajo de las partes rotatorias. Mant_ngase aleJado de la abertura de descarga en rode memento. • Stempre pare et motor cuando se vaya ocuando no est_ usando su segadora, o antes de atravesar las entradas para autos, los senderos, camlnos y _.reas cublertas de ripio. , Nunca didja la descarga del material hacta los espectadores ni permtta a nadie cerca de la segadora mientras la est@operando. • Antes de ]imptar, inspeccionar o de reparar I a segadora, pare el motor y est_ completamente seguro de que la cuchilla y que todas las partes que se mueven se hayan detenldo. Luego, desconecte el alambre de la bujfa y mant_ngaJo alejado de 8sta para evltar el arranque per accidents. • No continOe haclendo funcionar su segadora sl le pega a un obJeto extra_o. Siga el procedlmiento descrito anteriormente, luego repare cualquler daSo antes de votver a arrancar y de operar su segadora. ° No cambie los ajustes del regulador o hagaque el motor ands a una velocidad exceslva. Se pueden produclr da_os en el motor y I esiones personales. • No opere su segadora st vfbra fuera de Io normal. La vtbracl6n exceslva es una lndicaci6n de daSo; pare el motor, revise en forrna segura la causa de la vibracl6n y haga las reparaclones seg0n sea necesadoo a_amPRECAUCI_)N: el bre de la buj(a ySlempre p6ngalo desconecte donde no pueda entrar en contacto con la bujt_a, para evitar el arranque per accidents, durante la preparaci6n, el transports, el ajuste o cuando se hacen reparacioneso per _staPRECAUOI6N: Es conocido el de de California que los gases de escape del motor de este productor contienen qufmtcos los cuates a ciertos nlveles, pueden ocaslonar, c_ncer, defectos de nacimiento, y otros daSos at slstema reproductive. 2O Estos accesodos estaban disponibles cuando se produjo la segadora, No son faeilltados Junto al cortacesped, Est_n disponibles en la mayoria de las tiendasde Sears yen los centros de servlcio. La mayorfa de las t]endas Sears tambi_n pueden mandar a pedir partes de repuesto para usted, sl lee proporclona el nOmerode] modelo de su segadora. Algunos de estos accesorios tal vez no se apliquen a su segadora. RENDIMIENTO DE LA SEGADORA DESVIADOR DE RECORTES PARA SEGADORAS CON DESCARGA ill ii ii ,,i,ii TRASERA JUEGOS iiip. PARA LA ACOLCHADORA PARA SEGADORAS CON DESQARGA RECOREOOR TRASERA __ MANTENIMIENTO ESTAB|LIZADORES PARA SEGADORAS CON DESCARGA RECOREOOR LATERAL ENVASI=S DE GASOLINA DE LA SEGADORA i i SILENCIADQRES CORREAS CUCH]LLAS ADAPTADORES DE CUCHILLA ,lllll iilll ii FILTROS DE AIRE , ,,LII. illll iii iiill lllL BUJ{AS ACEITE _,UEDAS ........... .... DEL MOTOR PARA REMOVER LASEGADORA DE LA CAJA DE CARTON Lea eslas tnstrucciones y este manual comptetarnente antes de tratar de monlar u operar su eegadora nueva. IMPORTANTE: Este cortac6sped viene SIN ACEITE O GASOLINA en el motor. • I%mueva las partes suettas que se lncluyen con la segadora,. • Corte las dos esqulnas de los exlremosde ta caja de cart6n y tienda el panel del extremo piano. • Remueva todo el material de empaque, excepto la curia entre el mango superior y _1Inferior, y ta curia que sujefa la barra de los contro! que exige la presencta de; eperador junto con el mango superior. = Haga rodar }a segadora hacia afuera de la caja de cart6n y revise[a cuidadosamente para vedficarsi todavla quedan partes suellas adicionales. Su segadora nueva ha sido montada an ta f_brica con la excepci6n de aque[fas partes que se dejaron sin montar pot razones de envio. Todas las partes como las tuercas, las arandelas, los pernos, etc. que son necesarias para completar el montaje han sido colocadas en la bolsa de partes. Para asegurarse que su segadora functone en forma segura y adeeuada, todas tas partes y los articulos de ferreter{a que se monten tienen que ser apretados seguramente, Use las herramientas correctas, como sea necesario, para asegurar que se apdeten adecuadamente. 21 COMO PREPARAR SU SEGADORA PARA PREPARAR LA BATER{A PARA DESDOBLAR AVISO: Su batert'a ttene que estar cargada antes de que pueda hacer arrancar su segadora. o Desconecte el conector de{ motor (macho) al conector de la baterfa (hembra) = Conecte et conector del cargador de la bateda (macho) al conector de fa bater[a (hembra). • Enchufe el cargador de la baterfa dentro del enchufe de 110 volt C.A. • Deje e{ cargador de ta baterfa conectado par 24 horas antes de hacer arrancar su motor par la prlmera vez_ • Despu6s de cargar, conecte el conector del motor al conector de la baterfa. EL MANGO IMPORTANTE: Despliegue el mango con mucho cutdado para no pellizcaJ o daSar los cables de control, ° Levante los mangos hasta qua la secci6n del mango Inferior se asegure an su lugar, en la poslcldn para segar. • Remueva ra curia protectcra, levante la secclSn del mango superior basra su fugar en el mango infedor, y apriete ambas manitlas del mango., Remueva la curia del mango que sujeta la barra de los control que oxige la presencia del operador jun_o con el mango superior. ° El mango do ta segadora puedo ajustarse segOn Io acomode para segar Refi_rase a "AJUSTE DEL MANGO" en la SecclSn do Servicio y Ajustes de este manual Su motor cuenla con un alternador Integrado para carga parciaL Conecte su cargador de baterfa para cargarla segSn sea necesario. IMPORTANTE: El alemador del motor no Barra de control qua presencia del operador cargara una bateria descargada. AI final de la temporada de slega, la bateffa se debe cargar par 48 horas para protegerla durante el peffodo de almacenamiento an el tnvierno. Mango Levantar Stempre co_nePRECAUCI6N: desconecte el ctor def motor del conector de la bater[a Mango PARA INSTALAR para evitar el arranque par accldente at transportar o guardar su segadora despu_s de la temporada. Posloi6n para segar Conector del motor(macho) LOS ACCESORIOS $u segadora be enviada lista pare usarse coma una acolchadora de capa vegetal. Para converlJrla de modo qua pueda ensacar o descargar. o Abra ta puerla trasera y remueva la tapon acolchadora. Gu_rdela en un lugar seguro, ° Ahora puede instalarel recogedor o el desvtador de recortes opclonal. • Para volver a la operadSn de aco{chamlento con capa vegetal,inslale la tapon acolchadora en la aberk_rade descarga de la segadorao Oargador de la bateria Conector de la bateda(hembra) se_gaPRECAUCl6N: haga functonar su dora sin la tapon No acolchadora aprobada en su lugar, o sin el desvfador de recortes, o sin el recogedor de c_sped, aprobados, en su lugar. Nunca trate de operar la segadora ouando se ha removtdo la puarta trasera o cuando est& un poco ablerta. 22 Conector del cargador de ta bateria(macho) FAMILIARICESE CON SU SEGADORA LEA ESTE MANUAL DEL DUENO Y LAS REGLAS DE SEGURIDAD ANTES DE OPERAR SU SEGADORA. Compare las ilustraciones con su segadora pare familiadzarse con la ubicaci6n de los diversos controles y ajuste& Guarde este manual pare referencia en el futuro, m II ,i ............... i !'!'1 iii i i ii ,,, ,111!1111111 II"'IIIH" ,,,,, _r,, ......... Estos s_'mbolospueden apareser sobre su segadora o en a iiteratura proporcionada con el producto. Aprenda y comprenda sus sfgniflcados. AT'rENCI_H O ADVERTF.,,NCIA ,i , MOTOR ENCENOEOO 1,1!! MOTOR APAGADO i!111 , R/_PIOO ,i ,,, LENTO , i E£TRANGU L&CION COM. ACEfTE PELfGRO, GUARDE LA£ :BUSTIBLE MANO:9Y LOS P_E£LEJOS iiiiiiii1[i,1[ I lnterruptor de arranquee de Ifave I i, lulnuull '!IIIIIK ........... Barra de control que exige la presencia del operador Cable de control de zona del motor Control de impulsi6n Mango del arrancador auxiliar Mantila del mango Tape dei deposito de del motor con varflla de nivel Recogedor del c_sped '--... Caja Tapon de la acolchadera Tape de1 depostto de I gasolina Cubferta de la lmputsISn IMPORTANTE: Este cortac_sped vlene SIN ACEtTE O GASOLINA en et motor. Ajustador de la rueda (on cada rueda) 11111 CUMPLE ......................... CON LOS REQUISITOS DE SEGURIDAD , i ,1111 _:_ DE LA cPsc Las segadoras a motor, que se conducen desde ta parte de arras, rotatodas, Sears, cumplen con los estAndares de seguridad del American National Standards Institute y de la U.S, Corn sumer Product Safety Commission, La cuchi,lla gtra cuando el motor est& functonando. , iii, iiiiiii i, i , iii Barra de control que exlge la presencia del operado - t[ene que sujetar.,se abajo, junto con el mango, pare hacer arrancar el motor. Su_ltela para parar el motor. Cebador- bombea combus_Jble adiclonal desde el carburador at cItindro pare uso cuando se neceslta hacer arrancar un motor frfo. Mango del arrancador auxillarhacer arrancar el motor. I ii '1 iii I! Palanca de control de la impulsi6n - se usa pare enganchar la segadora pare movimiento hacla adelante impulsada a motor. Tapon de ia acolchadera .- situada en la abertura de la descarga y debe ser quitada cuando se convierte la operaccl6n de ensaoado a desearga. tnterruptor de arranquee de Ilave- se usa pare hacer arrancar el motor. se usa pare 23 - La operaci6n de cualquier segadora puede hacer clue satten objetos extra5os dentro de sus ojos, to que puede producir dafios graves en _stos. Slempre use anteojos de seguridad o protecci6n para los ojos mientras opere su segadora o cuando haga ajustes o reparaolones. Recomendamos una mascara de seguddad de visiSn amplia, para uso espejuelos o anteojos de seguridad estandarte. COMO USAR SU SEG_&3ORA VELOOIDAD DEL MOTOR La veloctdad del motor se estableci6 en la f&brica para un rendtmlento 6p_mo° La velocidad no se puede ajustar. CONTROL DE ZONA DEL MOTOR PARA MONTAR Y ADJUNTAR RECOGEDOR DE C_SPED • Cierre la tapa so}_ble, La tapa soltabte debe oscar cerrada cuando se esla operando la segadora, • Levante la puerla l_'aserade ta caja de la segadora y ponga e! bastidor dsl recogedor de c_sped en tas orejas formadas en ei puntal de bisagra de ]a puerta traser& ° El recogedor de c_sped esta asegurado en Ia caja de Ia segadora cuando se baja la puerta trasera para descansar en el bas_dor det recogedor de c6spsd No funclonar se_gaPRECAUCI6N: haga su el dora sin el desv}ador de recortes o sin recogedor de c_sped, aprobados, en su lugar. Nunca trate de operar la segadora cuando se ha removldo la puerta trasera o cuando est,_ un poco abierta° t_ePRECAUCI6N" Las regulactones tales exlgen que se Instale un control para el motor en esta segadora para reducir a un m,rnlmo et desgo de {esionarse debido al contacto con la cuchilla. Por ning_3nmotivo trate de elimlnar [a funciSn del control dsl Puntal de bisagra operadoro La cuchflla gira cuando eEmotor est#. funclonando, • Su segadora vtene equlpada con una baEa de control que exige la presencla dot operador, Io que requlersque el operador est_ detr_ del mango de la.segadora para hacerla arrancar y operarla. PARA AJUSTAR LA ALTURA DE CORTE OreJas formadas PARA VACIAR C#.SPED EL RECOGEDOR DE Para remover el recogedor del c_sped, pare el motor el allvtar la barra de contro{ que exige la presencia del operador. ° Levante la puerta de atras y remora el recogedor del c_sped por el mango. AViSO: El ajustador esta corr_ente colocado cuando las orejas de la placa estf_n Insedadas en el agujero del mango, Tambl#n, los ajustes de 9 posfciones (si equipado) pen'nltan que el mango pueda ser movido enlJ-elas orejas de la plac& _-_ Pu__rta trasera Bastidor de! recogedor del • Levante las ruedas para el corte bajo y baJelas ruedas para et corte alto, . Ajuste _aaltura de corte para que se acsmcde a sus requlsttos. La posfcidn del medlo es la mejor para la mayor{a de los c_spedes, o Para cambiar la altura de code, empuje la palanca del ajusiador hada la rued& Mueva la rueda hacia ardba o hacia abajo de mode que se acomode a sus requisitos, AsegQrese que tcdas tas ruedas queden igualmsnte ajustadas. Para un corte alto, baje las ruedas EL AVISO: No permita que el recogedor sea arrastrado euando 1o vaci6; puede ocasionarse daSos, Mango as de la plata Para un corte ba}o, levante Ias ruedas 24 CONTROL DE LA IMPULSION GASOUNA ,, La autoimpulsi6n se controla a] sujetar la barra de control que exige la presencia del operador hacia abajo en el mango y al empujar la palanca de control de la tmpulsfSnhacia adelante hasta que suene "clic," luego se sueita la palanca. • El movlmlento hacia adelante parar_ cuando ta barra de control que exige la presencia del operador se suettaoPara parar el movimiento haSa adetante sin parar el motor, sueite la barra de control que exige la presencia del operador un poco hasta que se desenganche el control de ]a tmpulsi6n. Sujete la barra de control que extge la presencia del operador abajo en contra del mango para continuar segando sin autoimpuLsi6n. ,, Para mantaner el control de la impulst6n enganchado cuando se de vuelta en Ias esquinas, empuje el mango hacta abajo y levante las ruedas delanteras fuera del suelo al gtrar la segadora. Barra de control que exlge la presencia de], operador \, \ \ " Para enganchar el control de la tmpulsi6n Control de ta Impulsi6n • Para hacer arrancar un motor fr[o, empuje el cebador ctnco (5) veces antes de _atarlo. Use un empuje firmemente. Este paso normalmente no es necesario cuando se hace arrancar un mobr que ya ha estado funclonando pot unos cuantos minutos • £ujete la barra de con#ol que exJgela presencia del operador abajo en et mango. • Gire la Ilave para et arranque el_ctrico en el so.do de las manillae dei relojpara hacer arrancar el motor. IMPORTANTE: No haga arrancar el motor m&s de 5 segundos continuados. Espere 5 a 10 segundos entre cada vez que trate de hacerlo arrancar. • Para hacer arrancar el motor usando Ia manila del arrancador auxIIiar, siga los pasos anterfores. Intercamble el uso de ra l[ave del arranque electr_co pot el cord6n arrancador. Tire la manilla arrancadora rApldamenteo No permita que el cord6n arrancador se devuelva abruptamente. • Para parer el motor, suette fa barra de control que exige la presencia del operador "Control de la impulsi6n desenganchado ANTES DE HACERARRANCAR EL MOTOR ACEITE Su segadora rue enviada sin aceite en el motor. • Aseg6rese queta segadora est6 n_'elada y que el ,='ireaalrededor del dep6slto de aceite est,, limpia, = Remueva la tapa del dep6elto de aceite de[ motor rellene hasta la Ifnea de Ileno en _ta. AVISO: Permitir quel acelte se asiente bien en el motor para leer blen su nivel. , El motor puede contener 20 oz. de aceite. Para el tipo y ta ca[idad vea "MOTOR" en la secci6n de [as Mantenlmento en este manual • Vacle el acelte lenlamente No to ltene demastadoo . Revise et nivet del aceite antes de cada uso, Agregue aceite si es necesario. Liens hasta [a l_neade lleno en la varilta indicadora de ntvel, • Para leer el nivel adecuado, apriete Ia tapa det dep_sito de aceite del motor carla vez, • Vuelva a tnslalar la tapa del dep6sito del acelte y apd_tela. • Camble el acefte despu_s de 25 horas de operaci6n o una vez pot temporada. Puede necesitar cambiar et aceite m_s a menudo cuando las condlclones son polvorosas o sudas ° Uene el estanque de combustible,, Use gasolina regular,sin plomo, nueva y timpia con el mfnimo de 87 octanos,, (E! uso de gasolina con plomo aumentar_ los dep6sitos de 6xido de plomo y carbono y se redudra la duraci6n de la v_vula), No mezde el aceite con la gasofina, Para asegurar que la gasolina utilizada sea fresca compre estanques los cuales puedan ser utilizados durante los primeros 30 dfas. ADVERTENClA: La experiencia ha indicada que los combustTbles mezcladoe con alcohol (conocidos como gasohol, o el uso de etanot o metano]) pueden atraer ta humedad, la que conduce a la separaci6n y formaci6n de _cidos durante el almacenamientoo La gasolina acfdica puede daRar el sLstemadel combustible de un motor durante el almacenamlento. Para evitar los problemas con el motor, se debe vaciar e_sistema de combustible antes de guardarlo por un perfodo de 30 dfas o mAs. Vac[e et estanque de combustible, haga areancar el motor y h_gato funclonar hasta quetas tfneas dei combustible y el carburador queden vacfos. La pr6xlma temporada use combustible nuevo. Vea las Instmcciones para e! Almacenamiento para m&s tnforrnaci6n. Nunca use producbs de fimpieza para el motor o para et carburador en el estanque det combus_bte pues se pueden producir daSos permanentes, PARA HACER ARRANCAR EL MOTOR 25 AVISO: En c!lmas m&s frfos puede que sea necesario repetir los pesos det cebado,. En cltmas m_s calurosos el cebar demaslado puede producir el ahogo y el motor no va a arrancar. Si se ahoga el motor espere unos cuantos minutes antes de tratar de hacedo arrancar y no repila los pa,_s del cebadoo Tapa del deposito de la gasolina Tapa det deposlto de aceite del motor los reeidous del tapon) CONSEJOS PARA SEGAR • Bajo oiertas condictones, tel come c_sped muy alto, puede set necesario el elevar la altura de1 corte para reducir el esfuerzo necesarlo para empujar la segadora y para evitar sobrecargar el motor, dejando montones de recortes de c_spedo Puede qua sea necesado reduclr la velocidad del recorrldo y/o haga funclonar la segadora sobre el _rea per segunda vez, • Pare un corte muy pesado, reduzca el ancho del corte pasando parcialmente per enclma del lugar anterlormente cortado y siegue lentamente. • Pare un major ensacado det c_sped y pare ta mayorfa de las condtclones de corte, la velocidad del motor debe ajustarse ala postci6n de r_pido. ° Cuando use una segadora con descarga trasera en c_sped hi3inedo y pesado, los montones del c6sped cortado puede qua no entrenen el recogedor de c_sped. Reduzca la velocldad del recorrido (velocidad de empuje) yio haga funcionar la segadora sobre el &rea per segunda vez. o St queda una huella de cortes en el lade derecho de una segadora con descarga trasera, s]egue en la direccl0n en qua gtran las manlllas del reioj, solapando un poco para recaudar los recortes en la prOxima pasada. , Los pores en los recogedorea de c_sped de tela pueden Ilenarse con mugre y polvo con el use y los recogedores recaudar_n menos c_spedo Para evitar _sto, rocfe el recogedor con la manguera de agua regularrnente y d_Jelo secarse antes de usarlo. • Mantenga la parte superior de! motor, alrededor del arrancador, despejada y sin recortes de c_sped y paJa. Esto ayudar_i el flujo de! aire del motor y extender& su duractOn. CONSEJOS PARA SEGAR Y ACOi_Q-IAR IMPORTANTE: Para obtener el major rendimelnto mantanga la caja de la segadora sin acumulacion de cesped y basurao Yea "t.Jmpioza en la seccion de "MantenJmento" de este manual • La cuchilla acolchadora especial va a vofver a corlar los recortes de c_sped muchas veces, y los reduce en tamale, de mode que st se caen en el c_sped se van a dtspesar entre _ste y no se van a notar. Tambi_n, el c_sped acolchado se va a deshacer r-,ipidamente entregando substandas nutrilJvas pare el c_spedo Siempre acolche con la ve[ocidad del motor (cuchtlla) m_ alta, pues asi se obtendr_ la rnejor acci6n de recorte de las cuchittas. • Evite corlar el c_eped cuando es_ mojado, El c6sped moJado gende a former montonee e Interfiere con la acctOnde acolchado, La major hera pare sager el c_sped es temprano en la tarde. A esa hera _s_ se ha secede y el _ea recl_n corlada no quedar_ expuesta at sol dlrecto. .Para obtener los mejores resuttados, ajuste la affura del corte de la segadom de mode qua _sta corte solamente el tercio superior de }as hojas de c_spedo,En et case de qua el c_sped haya crectdo demastado, puede ser necesario et elevar la altura del corte para reducir el esfuerzo necesario pare empujar la segadora y pare evitar sobrecargar el motor, dejando montones de recortes de c6sped. Para un acolchamiento muy pesado, reduzca el ancho del corte pasando per encima del lugar anterion-nente cortado y elegue lenf_nente. - Ciertos _lpos de c_sped y sue condiciones pueden exigir que un &rea tenga queser acolchada per segunda vez para esconder completamente los recortes° Cuando sa haga el segundo code, slegue atravesado o en forma perpendicular a la l:_sada del pdmer corte, • Cambie su patron de corte de semana a eemana. Slegue de notre a sur una semana y luego cambie de este a oeste la pr6×ima semana. Esto evitar_ que el c6sped se enrede Max. I/3 MAINTENANCE SCHEDULE FILLIN D,_TES AsYooooMPL E _,_ RE uaR SEnVlOE " Checkfor Loose Fasteners I Clean/InspectGrassCatcher . I._ ' _ -- .......... v o tM1(Power-Prope_iedMowers) _.., Checkdrivebelt/pulleys r. (Power-Propeled Mowers) R Chec_sharpe_ePiace Blade................ LubricationChart Clean Battery/Recharge (E}ectricStart Mowers) If ...... . i E (3hockEngine0!I,Level i v' v' v' v'4 iii .................. If N_Oil V#1,2 G Clean Air Filter ] Inspect Mulfler N i Cleanor ReplaceSparkPlug v'2 t/ .............. v'2 E i ReptaceAir Filter PaperCartridge 1 - Ch_:,ngemore ellen when0petering undere hasw iced cr]n highambienttampera_ms_ 2 - Servicemore oftenwhenopamllngIn dirtyordue_ conditions 3 - Replaceblades more oftenwhenmow_ngtn sandysell, 4 - Charge 48 hours at eed of season RECOMENDAC!ONES TABLA DE LUBRICAClON GENERALES Ajustador de la rueda La garantfa de esta segadora no cubre tos art[culos que hart estado sujetos al abuso o a la negligencia del operador. Pare recibir todoel vaJor de la garantfa, el operador 'dene qua mantener la segadora segt3n fas tnstrucciones descdlas en este manual, ..f-(_) ) Hay algunos aJust_s qua se lJenenqua hacer en forma periSdica pare poder mantener su unidad adecuadamente, Todos los ajustes en la secciOn de Servicio y Ajustes de este manual t_enenqua set revfsados por to menos un vez por carla temporada. • Una vez al a_o, carnbte la buJfa,itmple o cambie el e[emento del filtro de aJrey revise si ta cuchi!ta es_ desgastad& Una bujfa nueva y un e{emento dei fi]tro de alre llmpIo/nuevoaseguran la mezcla de afro.combustible adecuada y ayudan a qua su motor funcione major y que dure re&s, , Siga el programa de mantenimiento en este manual. ANTES DE CADA USO • Revise el nivel del aceite del motor. • Revise si hay sujetadores sueltos° LUBRlCAClON Mantenga la unidad blen Iubdcada (vea la 'q'ABLA DE LUBRICACIO ,_. Aceite dei motor Bisagra de ia puerta trasera (_Olavlja de montaje del puntal dot mango (D Roeie e! lubricante (_ Refierase la seccion de MANTENtMENTO "MOTOR" IMPORTANTE: No aceffe o engrase los rodamlentos de la rueda de plastico. Los lubdcantes vlxeosos atrafran polvo y mugre, 1o que acortara la durac[on de los rodamientos autoiubricantes. Si cree qua t_enen que lubricarse, use solmente un !ubr]cante tipo grafito, de polve seco, en forma moderada. 27 ESPECiFICACIONES NOMERO DE MODELO NOMERO DE SERIE 917.377830 ill FECHA DEL PRODUCTO ii, DE COMPRA CABALLOS 6.0 DE FUERZA: rl , ,,,,, ,,,,,,,, ,,,,,,,,,,,,, i _ _ CAPACIDAD Y T IPO 3E GASOLINA: 1.6 Cuartos REGULAR SIN PLOMO FIPO DE ACEtTE: SAE 30 (sobre 32°F) SAE 5W-30 (deba]o 32°F) API-SF/SH/SG) 3APACIDAD DE ACEITE: (ABERTURA: "OLERANCtA ,030") DE VALVULA: , i, i,ii --- 20 oz. de capacidad i BUJ[A _ i i L I I LIt IIIIIIIIIIIIIIIII II CHAMPION RJ19LM ADMISION: DESCARGA: ll,l,m .005" - .007" .007" - .009" , u,, SENCENDIDO DE ESTADO SOLtDO ABERTURA DE AIRE: .010 IN. TORSI6N DEL PERNO DE LA CUCHILLA: 35,-40 FT. LBS. O J19LM i, L, i,,, El num_ro del nodelo y et de sede se encuentran en la calcomanfa adjunta a la parte trasera de ta caja de la segadora. come la fecha de compra y mantengalos futuroo SEGADORA Siempre observe las reglas de segurldad cuando hags el manten[mlentoo LLANTAS • Mantenga las Ilantas sin gasoline, acelte o substancias qufm_cas pare control de insectos que pueden dar3ar la goma. . Evite los toeones, lae piedras, Fas gdetas profundas, los obJetos afllados y otros peligros que pueden darter alas llantaso CUIDADO DE LA CUCHILLA Pare obtener los mejores resuttados, la cuchitla de la segadora ttene que mantenerse afilada, Cambie la cuchilla doblada o da5ada. Debe registrar tanto el num_ro de serie en un lugar seguro para refencia en et • Remueva el pemo de la cuchitla gfr_,ndolo en et sentldo contrario en que giran las manillas del reloj. ° Remueva la cuchttla y _os art[cutos de ferreterfa adjuntadores (el pemo, la arandeia de segurldad y la arandela endurectda). AVISO: Remueva el adaptador de la cuchil{a y revise el cuba inter[orde la ranura del adaptador de la cuchilla_ La ranura tiene que ester en buenas condiciones pare que funclone en forma adecuada. Cambie el adaptador st est_ daSadoo PARA CAMBIAR LA CUCHILLA ° Ponga el adaptador de la cuchllla en el clgueSal del motor,, AsegL_rese que la ranura PARA REMOVER LA CtJCHtLLA del adaptador y que el ehavetero dsl ° Desconecte el alambre de la buj{a y pSngalo c]gueSal est6n alineados. en dende no pueda entrar en contact(} con . Ponga la cuchtl]a en el adaptador de _sta _stao alineando los dos (2) agujeros en ]a cuchiga • Hags descansar la segadora en su lado, con las salientes e[evadas en et adaptador. Asegt_rese que el filtro de airs y que el • Asegurese de que el borde de salida de la carburador queden mtrando hacia arriba. cuchtlta (opuesto al horde affiado) est_ o Use un bloque de madera entre la cuchi{la y hacia arriba hacta el motor. la caja de la segadora para evitar que la •instale el perno de la cuchilla con la cuch|tla gire cuando se le quite el pemo. arandela de seguridad y Ia arandela • Proteja sus manes con guantes y/o endurecida en e{ adaptador de la cuchitla y envtJelva la cuchilla con una tela gruesa. 28 el ciguef_aL CAJA • Use un bloque de madera entre la cuchtlla 3/ la caja de ta segadora y apt!ate el perno de la cuchilta gir#,ndolo en et sentido en que gtran las manitlas del reioj. ° La tors]dn pare apreter recomendada es de 35 - 40 pies fibres. IMPORTANTE: El perno de la cuchilla es clase 8 tratado a calor. PARA AFtLAR ° Pare mantener et slstema de lmpulsi6n funclonando en forma adecuada, la caja de engranajes y el #.tea alrededor de la impulsi6n tienen que mantenerse limp!as y sin acumutaci6n de basura, Utopia debajo de la cubierte de la impulsi6n dos veces por temporadao ° La caja de engranajes se liana con lubdcante haste el nivel adecuado en ta fAbdca_ La t3nica vez que el Iubricante necestta atenci6n es cuando se le ha prestado servtcio a fa caja de engranajes. • Sl se neceslta lubricante, use soIamente Grasa Texaco Starplex Premium !, Parte No. 750369. No use substitutos. RUEDAS DE IMPULSI(3N LA CUCHILLA AVISO: No recomendamos el afilar ta cuchitla - perosi to hace, aseg0rese de que quede balanceada.. Se tiene que tenor cuidado de mantenefla balanceada. Una cuchitla qua no est_ batanceada va a producir eventualmente dafio en la segadora o en el motor° • La cuchtila puede afitarse con una lima o en una rueda rectificadora. No trate de afiiarla mientras se encuentro on la segadora,, t Pare revisar el balance de ta cuchiila, clave un clavo en una viga o en la pared.. Deie alradedor de una pulgada de un clavo recto expuesto_ Ponga el agujero central de ia cuchilla sobre la cabeza del clavo, St la cuchitla estA balanceada debe permanecer en la posic]On horizontal S! ouaiquiera de los extremos de la cuchilla se mueve hacta abaJo, aflle el extremo pesado haste que _sta quede balanceada. Adaptador de la cuchilla \ Revise los ruedas de lmpulsi6n delanteras coda vez antes de segar, para asegurarse de qua se mueven Itbrementeo Si las ruedas no glran libremente quiere decir qua hay basura, recortes de c6sped, etc. en el #.rea de Ias ruedas de irnpulsi6n y tfenen que Itmpiarse para liberarlas,. Es necesario limp[ar [as ruedas de impulsi6n; revise ambas ruedas delanteras. . Remueva los tapacubos, Ias clavijas de horquilla y los arandelas, o Remueva los ruedas de los ajustadores de los ruedas. • Remueva la basura y los recortes de c_sped de dentro de la cublerta contra el polvo, pi56n y/o de los dientes de los engranajes de las ruedas de tmpuis]6n. ° Ponga {as ruedas de vueita en su lugaro ° Si despu_s de limpiar las ruedas de Impulsl6n no gtran libremente, pSngase en contacto con su centro/departamento de servicto autortzado m,__scercano_ Chavetero del clguefial Ra.u Z---"'--,/ Cuchilla ' _ DE ENGRANAJES ./_ MOTOR I 1 \" " Arandela Arandela de \ .\ , LUBRIOAClON -'-Adaptador de ta Use solamente acetto de detergente de alto calldad clasificado con la clasificaclc3nSF, SG o SH de se_clo APL Seleccione la calidad de viscosidad SAE seg_insu temperature de salida seguridad RECOGEDOR DE C_SPED • Et recogedor de c_sped puede ser roclado con el ague de la manguera pero tiene que ester seco cuando se vaya a usarr o Revise su recogedor de c_sped a menudo para verificar si est_ dafiado o deterioradoo Se vaa desgaster con el uso normal. Si se necesita cambiar el recogedor, c_mbielo solamente pot uno qua sea aprobado por el fabricante. D_ el n0rnero del modelo de la segadora cuando Io ordene. AVISO: A pesar de qua los aceiles de multivlscostdad(5W30, 10W30, etc.) mejoran el arranque en clima ffio, estos aceites de mullMscosldad van ha aumenlar el consumo de ace!to cuando se usan en temperatures sobre 320 F. Revise el nlvel del aceite del moborm&s a menudo, pare evitar un posible dafio en el motor, debido a qua no tiene suficiente acette,. 29 Cambie elaceltedespu6s de25horasde operaci6n o potIomenos unavezelar3oslla segadora seutilizemenos25horasela5o. Reviseelnive[delaceltedelcarter antes de Ranuras Labio arrancar el motor y despu_s de cada cinco (5) bores de uso contJnuado, Apriete el iap6n del aceite en forma segura cada vez que revise el nivel del aceite° PARA CAMBIAR ELACEITE Oartucho Oreias de la eublertar Cubierta DEL MOTOR StLENCIADOR AVISO: Antes de incliner la segadora pare drenar el aceite, drene el tanque de combustible haciendo correr e! motor hasta que el tanque est6 vacio. ° Desconecte el alambre de la bujfa y pSngalo de modo que no pueda entrar en contecto con _sta, • Remueva la tape del dep6sito del acette; d6Jela a un lado en una supefficie limpia.> • Incline fa segadora y h,_gala descansar en su lado y drene el acelte en un envase adecuadoo Mueva la segadora de atr'&spare adelante pare remover todo el aceite que se haya quedado etrapado dentn3 del motor, • Umpie todo el acelte den'amado en la eegadora yen el lado del motor,. • Uene el motor con acelte. U_nelo solamente haste la Ifnea de Iteno (FULL) en la varilla indlcadora de nlvel. NO LO LLENE DEMASIADO. • Vuelva a poner la tapa en el dep6slto del acelte. • Vuelva a conectar el aJambre de ta buj[a a 6sta., Inspeccione y carnbie el silenciador si est6 corrofdo pues producir un peligro de incendio y/o da5oo BUJIA Cambie su bujia cada afio para hacer que su motor arranque m_s f6cilmenle y funcione mejor. Ajuste la abertura de fa bujfa en 0.030 pulgada. UMPIEZA IMPORTANTE: Para obtener et JeJorrendimiento, mantenga la caja de la segadora sin acumutaclon de cesped y basura. Umpie la parte de abajo de su segadora despues de cada uso. FILTRO DE AIRE Su motor no funcionar_ en forma adecuada y puede sufrtr daSes sise usa un fitl]'ode &Ire sucioo Camble el fittro de alre cada afio, y m,_sa menudo, si siege en condiciones rnuy polvorosas o sucias, PAPA UMPIAR Plancha trasere EL FtLTRO DE AIRE • Suelte el tomitlo e tnctlne fa cubieda pare removerto, • CuIdadosamente, remueva el carlucho. • Lfmptelo gelpe&ndelo suavernente en una superficle plane. SI es_ muy suclo cambie el cartucho, _IbPRECAUCI6N: Desconecte et atambre de la buJfay p6ngalo en donde no pueda entrar en contacto con _sta. ,, Haga descansar Ia segadora en su lade. AsegQrese que el fillro de aire y que el carburador queden mlrando hacia arriba. Ltmpte la parte inferior de su segedora rasp_,ndotapare remover la acumulaci6n de c_sped y basura. o Umpie el motor a menudo pare evitar que se acumule la basura,. Un motor tapado fundona m_s calfente y se acorta su duraci6n. ° Mantenga.{as superficies putidas y las ruedas sin gasoline, aceite, etc. • No recomendamos el uso de una manguera de jardfn pare Itmptar la segadora a menoe que el ststems ef6clrico, et silencisdor, el filtro de aire y el carburador est6n tapados pare evitar que lee entre el ague, E! ague en el motor puede acortar la duraci6n de _ste. LIMPtE DEBAJO DE LA OUBII=RTA DE LA IMPULSl6N PRECAUCI6N: Los no solventes de usar petr61eo, como el kerosene, se deben pare limplar el cartuchoo Pueden producir el deterloro de 6ste. No aceite et cartucho. No Umpie debajo de la cubierta de la tmpulst6n por io menos dos veces cads temporada, Raspe debajo de la cubierta con un cuchilto para masilla o con una herramienta parectda, pare remover toda acumulaci6n de c_sped o basura en la psr'aa inferior de ta cubierta de la impulsi6n. use atre a presl6n pare Itmplarlo o secarlo. • In.staleel carlucho, luego vuelva a poner Ia cubierla asegurAndose que las orejas est6n alineadas con tas ranuras en la plancha trasera. Apriete el tomitfo en forma segura. 3O PRECAUCI6N: ANTES DE DAR UIER SERVICIO O DE HACER AJUSTES: • Suelte la barra de control y pare el motor° • AsegQrese que la cuchllla y que todas las partes movibles se hayan detenido cempletamente. • Desconecte el alambre de la bujfa y p6ngalo en donde no pueda entrar en contacto con _sta. ° Remueva los controtes y la barra de controles qua exigen la presencia del operador del mango superior. = Remueva la gui'a del cord6n arrancador del mango superior, . Remueva las ctavijas de horquilla. * Desconecte elmango Inferior de los puntales del mango, ° De vuelta el mango y vuelva a montar las clavijas de horquf!la que se hab[an removido. , Vuelva a montar la gufa del cord-on arrancador+ - Vuelva a montar los controles y la barra de control que exige la presencla del operado e_n el mango superior. SEGADORA PAPA AJUSTAR LA ALTURA DE CORTE Vea "PARA AJUSTAR LA ALTURA DE CORTE" en la seccf6n de Operacidn de este ma,quaJ. DESVIADOR TRASERO Se proporciona un desviador trasero, adJunto entre las _Jedas traseras de su segadora, para reduclr a un m(nimo la posibilidadqua objetos sean tanzados hacia afuera de la parte trasara de la segadora, en la poslct6n en deride se encuentra et operador, SI se daSa el desviador debe carnbiarse. PARA REMOVER/OAMBIAR LA CORREA DE IMPULSION • Remueva la cubterta de la tmpulsi6n. Remueva la cerrea empujandohacia abaJoen la polea de ia caja de engranajes. ° Haga descansar la segadora en su lade con el filtro de aire y el carburador mirando hacia arriba. ° Remueve ]a cuchitla, ° Remueva la defense en centre del desperdtclo_ • Remueva la correa de la polea del motor en el cigue_al,. • In.stale la correa nueva slgu]endo los pasos enterlores en el orden inversoo • Siempre use la correa aprobada per la fa_brica para asegurarse qua calce y dure. Cubtertade ta impulsion PRECAUGION: La barra de controles que gen la presencia del operador tlene qua plvotear Itbremente pare permitir e! enganche de ta cuchilla/freno cuando se suelta ia barra de control. No apriete demaslado los sujetadores qua sujetan a los controles al mango superior. o Pare cambfar de la posici6n de mediana baja a alta solamente se tendrd qua dar vuetta la seccl6n del mango superior° ° Pare cambiar de la posicl6n medfana baja a baja, sofamente se tendrd que dar vuelta la secci6n del mango inferior° Postci6n de envio Mediana bale Mediana alta / Correa abajo PARAAJUSTAR EL MANGO Se puede levantar o bajar el mango de su segadora segQn le quede c6modo, Hay cuatro (4) poe[clones disponlbtes: all:a, medtana alta, mediana baja, baja, Los mangos se envian montados en la poslcl6n medlana baja, • Para cambiar de la posici6n medtana baJa a mediana alta, ta seccl6n supedor y la lnfedor dot mango tendr&n que darse vuelta ° Remueva las abrazaderas del cable. 31 Alta Bala Marco tnfedor Mango interior (Ios marcos deben estar Apriete para remover completamente Puntatdel mango Abrazadra de horquitla PARA MONTAR Y ADJUNTAR Marco tubular Marco dee bastldor EL RECOGEDOR DE ClaSPED \ • Inserta Ia pterna del marco tubular en la abertura del recegedor de c_sped y desltce Io entre la costura de ta bolsa. AVISO: Mantenga la costura de la bolsa recoglda sobre la plerna recta del marco. • Cuando el marco salga dot otro lade de ia costura, lnserta inmediatamente e! extreme de_ marco adentro de la bolsa come mostrado en la intercalacl6n. . Deslice la costura lgual at rededor del marco tubular, al mismo tiempo trabaje el marco adentro del recogedor de c_spedo o Monte el marco Inferior al marco tubular come demostrado. . Deslice los sugetadores de vlnilio sobre el marco. AVISO: Sf los sujetadores de vinilio est&n muy duros, m6talos en agua callente, • Clerre la tapa soltable, La tapa soltable debe estar cerrada cuando se esta operando la \ MOTOR VELOCIDAD DEL MOTOR La vetocidad del motor ha side ajustada en la f&bdc& No trate de aumentar la velocldad del motor pues se pueden produclr lesiones personaIes., St cree qua el motor estA functonando demasiado r_pido o demastado lento, Ileve su segadora a un centre! departamento de servicfo autodzado para reparada o ajustadao se_ad egad°ra_ o PRECAUCl6N. No haga funcionar su era sin el desviador de recortes o sin el recogedor de c_sped, aprobados, en su lugar. Nunca trate de operar la segadora cuando se ha removido la puerto trasera o cuando est_ un poco abiertao CARBURADOR Su carburador no es ajustabte. SI su motor no est='_funcfonando en forma adecuada debido a problemas qua se sospeeha vienen del carburador, Heve su segadora a un centre de servicio autodzado para repararla y/o ajustarla. IMPORTANTE; Nunca manlpulee et regulador del motor, el qua ha side ajustado en fa f_brica para la vetocldad del motor adecuadao Pueda ser pellgroso hacer funclonar el motor a una velocldad per sobre elajuste de alto vetoctdad de la f_braca. Sl cree qua la velocldad alto regulada de! motor necesita ajuste, pongase en confacto con su centro/departamento de servicio autorazado mas cercano, el que cuenta con el equipo adecuado y ta expedencia para hacer los ajustes necesarios. Costura Marco tubular _ T_ )a soltable 32 Inmediatamente prepare su segadora para el almacenarnfan_ el final de coda temporada osi la unidad no ee va a usar per 30 dias o re&s, Barra de control que exige la presenefa del operador Mango superior SEGADORA Doblar haeia Cuando se va a guardar ta segadora per clerlo pedodo de tiempo, timpiela cu]dadosamente, remueva toda la mugre, la grasa, tas hojas, etc. Gu&ri:tela en un _rea Ilmpta y seca, o Ltmple toda la segadora (Vea I..IMPIEZA" en la seccl6n de Mantentmento de este manual). o Lubrfquefa seg0n se muestra en la secd6n de Mantentmento de este manual. • Aseg0rese de que todas las tuercas y clavijas y redes los pemos y tomillos est_n apretados en foma segura. Inspeccione/as partes que se mueven para vedflcar si est_n datiadas, quebradas e desgastadas_ Cfimbielas si es necesario. , Retoque todas los superficies que estSn oxidadas o con la plntura picada; use una lija antes de pintar. MANGO aeelame para almacenar . _[:_',.__ "__ _ _ / //_)) _ ; /)_I,Doblar _ 6"?_ Hacia _.L f/ _ Poeioi6n para segar ="" ,'x.' At,as Mango inferior MOTOR SISTEMA DE COMBUSTIBLE IMPORTANTE: Es Impertante evitar qua se formen depesitos de combustible tales come el carburador, el iiltro del conbustible, ta manguera del combustible o en el estanque durante et almacanamianto. La experienda tambeln Indlca qua Ios combustibles mezosadow con alcohol (conctde come gasohol o qua iienen etanol o metanol) pueden alraer humedad, Io que conduce a la separaci6n y a la formac[6n de ea cidos durante el almacenan]Ientoo La gasoUna &cidos puede da_ar el sistema de combustible de un motor durante el periodo de almacenarniento, ° Drone el eslanque de combustJbte, • Haga arrancar el motor y d_jelo funclonar basra que los Ifneas del combustible y eI carburador est_n vacios. • Nunca use los productos para llmpteza del carburador o del motor en et estanque de combustible pues se puedan producirdafios permanentes. • Use combustible nuevo ta pr6xima temporada. AVtSO: El estabilizador de combL_'-tiblees una altemaliva aceptable para reducir a un mfnimo la forrnacI6n de dep6sitos de goma en el combustible durante el perfodo de almacenamfento. Agregue estabilizador a la gasottna en el estanque de combustible o en el envase para el almacenamtento. Stempre siga ta properd6n de mezcla qua se encuentra en el envase del establtIzador, Haga funcionar el motor per Io menes 10 minutes despu_s de agregar el estabi!izador, para permitir que este Ileguea! carburador, No drone la gasolfna del estanque de gasollna y el carburador si se est_ usande estabillzador de combustible.. Puede doblar et mango de su segadora para almacenafla. , Apriete los extremes inferiores del mango inferior entre sf hasta que el mango inferior quede separado dot punta[ del mango, luego mu6valo hacia adelante. • Suelte los pemos de montaje del mango superior lo su_dente come para permitir que el mango superior se pueda doblar hada atr_s. IMPOR'lrAN'rE: Cuando doble el mangopara almacenamiento o e! transporte, asegurese que Io doble segun se muestra o puede danar los cables de control. ° Ouando preparesusmangos a parUrde la poslcl6n de almacenarniento, el mango Inferior autom_,ticamente se asegurar_ en la posici6n para segar, Mange inferior _ Puntal del mango Clavlja de horquilla ACEtTE DEL MOTOR Drene el aceite (con el motor caJiente)y c,-_nbielocon aceite de motor limplo. (Vea"MOTOR" en la secci6n de Mantenimento de este manual.) 33 BATERIA gasoline producir,_,problemas. = St es posible, guarde su unidad en un reclnto cerrado y cQbrala pare protegerta contra el polvo y la mugre. . Cubra su unldad con un forro protector adecuado que no retenga la humedad. No use pl&slJco.El pl_tico no puede respirar, Io que permite ta formaci6n de condensacl6n, Io que producir_ la oxldact6n de su unidad, IMPORTANTE: Nunca cubrala segadora Mlentras motor y las areas de escape todavta estan calienteL Sepre la baterla del conector del motor y cadue la baterfa durante 48 horas. ClLINDRO o Remueva la bujfa. ° Vacfe una onza (29 m{) de aceite a trav_.s del agujero de la bujfa en el ciltndroo ° Tire la manilla de arranque lentamente unas cuantas races para dlstribulr el aceite. , Vuelva a montar la nueva buj_'a. OTROS se_gaPRECAUCI6N: Nunca almacenela doraoongasolina en elestanquedentrode un edliicio en donde losgases pueden alcanzar una llamaexpueslao unachispao Permita que se enfffe elmotorantesde almacenaria en algOn recinto cerrado. • No guarde la gasoltna de una temporada ala otra, - Cambte eI envase de la gasoline si se empfeza a oxJdar,La oxldacl6n y/o la mugre en su IDENTIFICACION PROBLEMA No arranca DE PROBLEMAS CAUSA CORRECCION 1. 2. Ftltro de alre sucto. Sin combustible., 3. Combustible 4. Agua en el combustible, 4. 5. Alambre de la bujfa desconectado_ Bujla mate. Cuchilla suetta o adaptador de !a cuchilla quebradoo 5, ranclo. il. i23. Umpieicambie el filtro de aire, Liana el estanque de eombus tibleo Drene el estanque y vuelva a llenarlo con combustible ttmpio y nuevo. Drene el estanque de combus tibia y el carburador y vuelva a llenar el estanque con gasollna nueva, 6. 7. Barra de control en la posicl6n suelta, 9, Barra de control defectuosa. !0. Bateda baja 11. Conector de la bateria desconectado , Falta de fuerza t. 2. 3. 4. 5. 6, 6. 7, Camble la bujfa. Apriete el pemo de la cuchltla ramble el adaptador de ta cuchilla, 8, Preslone la barra de control hacla el mango. 9. Cambie la barra de control° I0_ Cargue bateda. 11o Conecto la bateria al motor. Cuchilla desgastada, doblada t, o suelta. Altura de las ruedas dispare}a 2, Veloeldad del motor lenta, Acumulacf6n de c_sped, hoJas o basura debajo de la segadora, Demasiado aceite en el motor. Velocldad de recorrtdo demasiado r_pida. 34 Conecte el alambre ala bujfa. 3, 4. 5_ 6. Ajuste ala poslcl6n de "Code mds alto." Ajuste ala pos{ct6n de "CoRe mds alto." Ltmpie/cambie el filtro de aire. Limpie ta parte inferior de la caja de Ia segadora. Revise el nivet del aceite. Corte a una velocldad de recorrldo m_,s lenta, DENTIFICACION DE PROBLEMAS PROBLEMA Mal cortedisparejo .....(_ORRECCION CAUSA 1. 2, 3 Cuchilla desgastada, doblada o sueli& Altura de las ruedas dispareja Acumulaci6n de c6sped, hojas o basura debajo de la segadora 1, Cambie la euchilla, Apdete et pemo de la cuchiifa. Ajuste todas las ruedas a ta misma atturao Umpie la parte inferior de la eaja de la segadora, 2_ 3. ,, Vlbraci6n t. Worn, bent or loose blade. 2, Bent engine crankshaft 1, El freno del volante del motor est,1 aplicado cuando so suelta la barra de controt, Cfguefial del motor doblado, excesiva nL_LLLL '"' = i,,,,,, ,,r 1, Replace b_ade,Tighten blade bolt,, 2,, Contact an authorized service center. '"UL Cord6n arrancador diffcil de tlrar 2. 3. 4. Adaptador de ta cuchitla quebrado, La cuchilla se arrastra en el c_sped 1,, Prestone la barra de control hacia el mango superior antes de ttrar el cord6n arrancador. 2, PSngase en contacto con su centre de servicio autor_zado m&s cercano. 3. Camble el adaptador de la cuchtlla. 4, Mueva Ia segadora a un lugar en donde el cSsped ha side cortado o a una superficle firme para hater arrancar et motor. ,,,,, P6rdtda de impulsi6n Recogedor de c6sped no se llena (sl viene equtpado) 1. Ruedas impulsoras no gIran cuandoel control de [mpulsi6n estA enganchado. 2. La correa no estd imputsando. 1, AJuste o cambte el cable de control defmputsi6n, st estA rote, 24 Ponga las correas en Ias poteas o cdmbietas si estdn rotas, 1. Altura de corte demasiado baj& Levantamiento de la cuchiUa desgastado. Recogedor sin ventilact6n de aireo 1. Eleve la altura de code, 2, Cambie las cuchillas,, 3. Umpie el recogedor de c_sped. Et c#sped est#. demasiado alto o la altura do la pJeda demaslado baJa, Parte trasera de la caja!cuchilla de la segadora arrastrdndose en e! c_sped, Recogedor de cgsped demasiado lleno, Posici6n de ta altum del mango no adecuada para uste& 1o Eleve la attura de code. 2. 3. Dlficil de empujar 1. 2, 3. 4. 35 2_ 3_ 4. Eleve la parte trasera de la caja de la segadora (1) un iugar m_s alto, Vacfe et recogedor de c_sped Aiuste la altura del mango de mode que le acomode, ROTARY LAWN MOWER - - MODEL NO. 9'17.377830 BATTERY 5 4 I ! 3 \ ! KEY NO, PART NO, 1 2 3 157553 750909 17411312 4 5 86353 111549X DESCRIPTION Battery Bracket Battery Hex Washer Head Screw 13 x .750 Connector Mountlng Clip Battery Charger 36 ROTARY LAWN MOWER -- MODEL NO. 917.377830 GEAR CASE ASSEMBLY PART NUMBER 702511 oj" f" 17 7 + KEY NO. PART NO. 17490416 2 3 4 6 137055X004 137053 57072 48373 7 8 9 77881 137051 137074 DESCRIPTION KEY NO. "Tapping Screw t/4-20 x 1-114 Engagement Bracket Shifter Seal Gear Case Halves Kit (Includes Key Nos. 4, 5, and 7) Beadng Worm Shaft Drive Shaft 10 11 12 13 14 15 16 t7 18 19 PART NO, 57079 131484 700343 86447 137050 750436X 750369 12000003 850848 81585)(004- DESCRIPTION Hardened Washer Clutch Yoke Bushing Rug Helical Gear Clutch Jaw Grease E-Ring Hi-Pro Key Spring Bracket NOTE: All component dimensions in U.S, inches. 1 inch = 25.4 mm 37 given ROTARY LAWN MOWER MODEL NUMBER 917.377830 27 72 31 | 76 58 4O 27 \ 34 3O 29 28 / ROTARY KEY NO, 1 2 3 6 7 9 10 11 12 13 t4 15 16 17 20 21 22 23 25 27 28 29 30 31 PART NO. 34 165451X479 162208 63601 136376 STD541425 151023 128415 150050 S'TE_12505 144929 156374X479 700365X479 133190X479 140661X479 140540 150425 8,1596 87677 83.,o23 151158 142748 62335 145.9,25X004 701037 70033tX004 146630 37 39 40 41 150078 151512X479 1515117-,479 150406 LAWN MOWER DESCRIPTION UpperHar_e Zone Control Asrn_(Inc_dlngCable) Nylon LockNut HandleKnob Locknut 1/420 Rear DoorKit Pop R_vet Se{fTapping Screw #10-24 HexTapp_ng Screw 1/4-20 x 1/2 HexWasher Head Screw t/4-20x2-1/8 Back Plate Side Baffle DischargeBaffle RearBame RearSkirt MulcherPfug Engine Pul|ey HFPro Key #505 Nut Wheel & Tire Assembly Shoulder Bolt 3/8-!6 Bel_e'_lleWasher Axle Arm Assembly Se]ecterKnob Selector Spring Spacer Wheel Adjusting Bracket -Ihread Cutting Screw 5/16-18 x 3/4 HandJe8racket Assembly (Left) Handle Bracket Assembly (Right) He× HeadThread Rolling Screw 3/8-16 x ! -1/8 MODEL NUMBER KEY NO. PART NO. 44 46 47 48 49 50 51 52 55 55 57 58 59 61 62 64 160677 851514 157101 851074 850263 851084 165548 85463 751592 88652 51793 15"/081X479 131959 132001 134612 ...... 72 74 75 76 -- 66426 77400 169786 166639 917.377830 DESCRIPTION Lawn Mower Hous{ng (Incl.Key #14,15, 17, 51 & 52) BladeAdapter Blade 22" Ha_enedWasher Helical Washer 3'8-24 x 1-3/8 Grd, 8 Hex Head Machine Screw3/8-24 x 1-3/8 Grd. 8 Front Baffle DangerDecal Locknut 3/8-16 HingeScrew HairpinCotter LowerHandle HandIeBoit RopeG_de DebrisShield Engine - (See Breakdown)Bdggs & Strat_n Modet 12HB07-2632-E1 See Batten Repair Parts Page Wire tie HubCap ZenaControlCab_e Owner's Manual(Engiist¢Spanish} Available accesser|as net inctudedwith _awnmower:. 7133623 Gas Can (2.5 gal.) 71335O0 Fuel St_b_zer 71 33000 SAE 30W O|l (20 oz.) 7133417 DustShield 71 33316 MowerCover 7133303 Chute Del_ector ROTARY LAWN MOWER MODEL NUMBER 917.377830 11 54 16 ! \\ J_ 0 ! 15 J ROTARY KEY NO. 2 4 5 6 8 9 11 12 13 14 15 16 17 18 27 PART NO. 145755 158755 146527 15O495 77400 145212 151156 12000058 137054 88080 88118 67725 145793 701037 143603 LAWN MOWER MODEL NUMBER DESCRIPTION DriveControt Hex Washer Head Screw 1/4-20 x 2-t/8 V-Be|t Sprtng Retainer Hubcap Hex Nut Wheel & Tire Assembly E-Ring Pinion Dust Cover FeltWasher Washer 1/2 x 1-1/2 x .134 Control Bar Selector Knob Hex Washer Head Screw #10-24 x 3/4 KEY NO. 28 31 32 35 36 37 38 40 41 52 53 54 55 56 917.377830 PART NO. 154990 132010 137052 151521 702511 137090 63601 75192 151520 144748 144747 168265 86012 751152 DESCRIPTION Drive Cover Hex Range Nut Drive Pulley Whee_ Adjuster.Assembly (Left) Gear Case Assembly Spr_ng Nut Spr_ng Wheel Adjuster Assembly (Right) CatcherTube CatcherThroat Grassbag Dnveshaft Cover Nut BRIGGS & STRATTON 4-CYCLE ENGINE MODEL NO. 12H807 TYPE NO. 2632-E1 552 0 718 _ "_ REQUIRES SPECIAL TOOLS TO INSTALL. SEE REPAIR INSTRUCTION MANUAL [ 1019 LABEL KIT ] [ 1058 OWNER'S MANUAL I 746 MODEL NO, 12H807 TYPE NO. 2632-E1 BRIGGS & STRATTON 4-CYCLE ENGINE =_,,,_,,,,,-_ 36_ 692 a76@;_ i_ g77 CARBURETOR 137_ 276(_ GASKET S 708 SET 968 163_ Q 708A 121 CARBURETOR 276 @ 467 @ KIT 967A 110 _-_ 13 ',::to 358 GASKET 445 SET 717 _ _ 163A 43 _. 423A _ MODEL NO. 12H807 TYPE NOo 2632-E1 BRIGGS & STRATTON 4-CYCLE ENGINE 267_ ] s62 ,o,_ 505 @ 265 281 663 .,_ s21 .__ 427 347 957 ,_-., 677 '_ 60'1 _z-Y 836 19o 832 ,_ --,,. l_,_',_'_ ] 526 373 % e36 '_ BRIGGS & STRATTON 4-CYCLE ENGINE ] MODEL NO, 12H807 TYPE I _ ................ =i i i' i ................. iii1,,11 i i,i NO. 2632-E1 ,llql, i s_7 456 _:" 689 _ /, I f J t 5 J L/ 373A 65A 23 1005 I 1036 LABEL KIT-EMISSIONS 1033 VALVE OVERHAUL 10 993 KIT ©_0_ 5 I_,/F _ ] MODEL NO. 12H807 TYPE NO, 2632-E1 BRIGGS & STRATTON 4-CYCLE ENGINE KEY NO, 1 2 3 5 7 11 12 13 15 16 15 20 21 22 23 24 25 PART NO. 690045 399269 299819 693643 273489 693847 1<692549 95049 94916 693887 693204 692550 281658 692551 692987 222698 499627 27 28 29 30 92 33 34 35 40 45 46 51 692788 692789 692790 499631 692785 692786 692787 263190 499423 690124 225279 94699 499642 499641 263149 93312 262679 693404 692555 55 56 58 59 60 65A 95 97 98 98A 104 108 109 110 121 122 125 127 497442 498144 693389 805857 715257 94904 94098 693412 398185 483280 231371 223471 690023 ...... 690032 693749 690046 _-- 130 133 134 137 223470 398187 398188 _ 146 155 94388 225430 26 DESCRIPTION CyltnderAssembly Bushing/Seal Kit "# Seal-Oil Head-Cylinder _t Gasket-CylinderHead Tube-Breather Gasket_Crankcase Screw (Cylinder Head) Plug-Oil Drain Crankshaft Cover.Crankcase _r Seal.OH Cap-Oil Fill Screw (Crankcase Cover) Flywheel Key_Rywhee Piston Assembly (Standard) Piston Assy. (.010" O/S) Piston Assy. (,,020" O/S) Piston Assy. (.030" O/S) R_ngSet (Standard) Ring Set (,010 O/S) Ring Set (020" O]S) Ring Set (°080" O/S) Lock-Piston Pin Ptn-Pts'_on Red-Connecting Dipper-Connecting Rod Screw-ConnectingRod Valve-Exhaust Valve-Intake Spring-Valve Rata{nor-Valve Tappet-Valve Camshaft "k+ O '_ Gasket._lntaka (2 Required) Housing-Rewind Starter Pulley-Starter Rope-Starter Insert-Grip Gdp-StarterRope Screw (Rewind Starter) Screw (Throttte Valve) ShaftoThrottle Kit-Idle Speed Kit-Idle Speed • Pin-Float Hinge Valve-Choke Shaft-Choke O • Washer (Sold in Kit Only) Carburetor Ktt O Spacer-Carburetor Carburetor o Plug-Welch (Sold in Kit Only) Valve-Throttle Float-Carburetor _1,Valve.Needle • _1.Gasket-Float Bowl (Sold in Kit Only) Key-Timing Pfata-CylinderHead KEY NO. PART NO, 163 163A 186 167 272948 693458 493496 298049 187A 189 190 190A 209 209A 219 220 222 227 231 232 23a 265 267 276 692601 263106 692127 94644 263255 261306 693575 221551 693405 499505 94644 693408 263431 221535 692577 ....... 281 300A 304 805 306 307 332 333 334 693407 693.593 693621 692608 693610 94515 94877 692605 94731 337 356 358 363 365 373A 383 411 423 423A 427 445 455 456 459 467 478 504 505 552 562 597 601 608 613 6t6 619 621 635 491055 398808 690031 19069 692568 94908 19374 693463 94655 94929 692575 690510 225457 281503 281505 493_O3 693709 495659 231082 231078 94852 94943 95"t62 693394 94706 692547 94744 692310 805529 DESCRIPTION -k+ O _, Gasket-AirCleaner Gasket-Air Cleaner Connector-Hose Une-Fuel (Cut to Required Length) Une-Fuel(Molded) Batt-RockerArm Screw (Fuel Tank) Screw (Fuel Tank) Spring-Govemor Spring-Governor GeaPGovemor Washer-Thrust Bracket-Control Lever-Governor Screw (Control Bracket) Spring/Link Cap-Valve Clamp-Caslng Screw (Casing Clamp) • ÷ Washer_Seal (Sold in Kit Onty) Panel.Control Mu_fler-Exhaust Housing-Blower Screw (BtowerHousing) Shield-Cyiinder Screw (Cylinder Shield) Nut (Flywheel) Armature-Magneto Screw(Magneto Armature) Plug-Spark Wire-Step Gasket Set Flywheel Puller Screw(Carburetor) Nut (Rewind Starter} Wrench.Spark Plug Cap-Oil Ftl! Screw (Air Cleaner Base) Screw (Air Cleaner Base) Nul (Control Bracket) FtiterNC Cartridge Cup-Flywheel Retainer-Spring Pawl-Rachet Knob-Nr Cleaner Panel Washer Set Nul (Governor Lever) Bushing-Governor Crank Boll (Governor Lever) Screw (Spring Retainer) Clamp-Hose Stealer-Rewind Screw (Muffler Mounllng) Crank-Govemcr Screw (Cyt. Head Plate) Switch-Stop Boot-Spark Plug BRIGGS & STRATTON 4-CYCLE KEY NO. 6_7 MODEL NO. 12H807 TYPE NO, 2632-E1 ENGINE PART NO. ---- 663 676 677 689 692 717 718 736 741 742 746 798 819 832 836 836A 668 875 883 9t4 692577 393757 94705 263073 262715 693462 230192 95230 692565 692564 692566 692559 692598 693583 94896 693624 498592 693459 272309 94786 914A 692557 KEY NO. DESCRIPTION • • Washer (Sold In Kit Only) Screw (Control Panel) Deflector-Muffler Screw (Muffler Del'lector) Spdng+Fdctlon $prfng-Datent (Choke) Alr Cleaner Bracket Pin-Locating Cttp+Nut Gear-T_ming PJng+RetaJning Gear-Idler Screw (Rocker Arm) Screw (Muffler Bracket) Guard-Muflter Screw (MufflerGuard) Screw(Mounting) -A-+Seal+Valve Base-AtrCleaner Gasket-Exhaust Screw (RockerOoverT/ 16" Long) Screw (Rocker Cover 3/ 8"Long) PART NO, 950 957 958 961 497620 493988 692586 693598 967A 968 972 975 977 993 1005 10!9 1022 1023 1026 1029 t033 1034 1036 1044 1050 1058 1It3 273356 693460 692587 493640 690033 273346 692592 690035 273241 499924 693517 225246 690034 281621 693203 692590 95137 273700 692577 121412 O ,_ t- DESCRIPTION Jet.Main Cap-FuelTank Valve-Shutoff Screw (AIrCleener Bracket) Filter-Air (Pro-Filter) Cover.Air Cleaner Tank-Fuel BowFHeat Gasket Set-Carburetor -#+ Gasket-Plate Fan-F]ywheel Label Kit -#+ GaskeFRockerCover Cover-Rocker Rod-Push Arm-Rocker Kit-Valve Overhaul Gulde+PuetlRod Label Kit-Emissions Screw (Flywheel) Nut (RockerArrn) Owner's Manual Screw(Panel) +0023-E1 Replacement Engine Included tn Gasket Set, Re! Number 358+ Included in Carburetor Kit, Ref Number 121+ Included in Carburetor Gasket Set, Ref Number 9'77++ included in Value Overhaul Kit, Ref Number 1033, NOTE: All component dimensions given in U+S,Inches 1 tnch= 254 mm 47 ,:..=-_ ,,='=,= _l',,ll,,_l, ill i i,,,i,,i,1,1 , '1'1 For in-home major brand repair service: Call 24 hours a day, 7 days a week 1-800-4-MY-Home sM(1-800-469-.4663) Para pedir servicio de reparaci6n 1-800-676-5811 a domicilio In Canada for atl your service and parts needs call Au Canada pour tout le service ou les pi6ces 1-800-665-4455 For the repair or replacement parts you need: Call 6 am-11prn CST, 7 days a week PartsDi 1-800-366-PART rect s" (1-800-366-7278) Para ordenar piezas con entrega a domicilio 1-800-659-7084 For the location of a Sears Parts and Repair Center in your area: Call 24 Hours a day, 7 days a week 1-800-488-1222 For information on purchasing a Sears Maintenance Agreement or to inquire about an existing Agreement: Call 9 am-5 pm, Monday _ Saturday 1-800-827-6655 _ L_u_,. ..................... 8EARS HomeCentral 166639 Rev.2 06.14.99 '. ..... i! IIII IIIJ# ,31_Ij_IUjl VB tJ Printed in U.S.A.
This document in other languages
- español: Craftsman 917.377830