Download Craftsman 917.28008 Operator`s manual
Transcript
Operator's Manual I II HHH_ CRRFTSMRH° LAWN TRACTOR 26.0 HR* 54" Mower Electric Start Automatic Transmission Model No. 917.28008 • Espa_ot, p. 37 ThiSengine,differentlyprOdUCtreadfrOmandhaS apreviouslYunderstandlOW emission engine whiChbuiltthisengineS.manual. BeforeOperateSyou start the "IMPORTANT: .........................................For answersto yourquestions ...................... ReadRulesandandfOllOWlnstructionsall SafetYbefore abOUtl.800.659.5917this product,Call: operating this equipment. Line 5 am - 5 Craftsmanpm, SEARS Mon - Sat Help Gasoline containing up to 10% ethanol (El0) is acceptable for use in this machine, The use of any gasoline exceeding 10% ethanol ([5t0) will void the product warranty. Esta mdquina puede utilizar gasotina con un contenido de hasta el 10% de etanol (EIO). El uso de una gasotina que supere el 10% de etanol (El0) anular,_ la garantia del producto. Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A. Visit our Craftsman website:www.sears.com/craftsman *_ taredbytheengine manufacturer 581859749 Warranty .................................................. 2 Safety Rules ............................................ 3 Product Specifications ............................. 6 Assembly!Pro-Operation ......................... 8 Operation..... .......................................... 13 Maintenance Schedule .......................... 21 Maintenance .......................................... 21 Service and Adjustments ....................... 26 Storage .................................................. 31 Troubleshooting ..................................... 32 Sears Service .......................... Back Cover Craftsman Riding Equipment Warranty CRAFTSMAN FULL WARRANTY FOR TWO YEARS from the date of purchase, all non-expendable parts of this riding equipment are warranted against any defects in matedal or workmanship. A defective non-expendable part well receive free in-home repair or replacement if repair is impossible. FOR FIVE YEARS from the date of purchase, the frame and front axle of this riding equipment are warranted against any defects in material or workmanship. A defective frame or front axle will receive free in-home repair or replacement if repair is impossible. FOR 90 DAYS from the date of purchase, the battery (an expendable part) of this riding equipment is warranted against any defects in material or workmanship (our testing proves that it will not hold a charge). A defective battery will receive free in-home replacement. ADDITIONAL LIFETIME LIMITED WARRANTY on CAST iRON FRONT AXLE (if equipped) FOR AS LONG AS IT IS USED by the original owner after the t_tthyear from the date of purchase, the cast iron front axle (if equipped) of this riding equipment is warranted against any defects in material or workmanship. With proof of purchase, a defective cast front axle will receivefree in-home replacement. WARRANTY SERVICE For warranty coverage details to obtain free repair or replacement, call 1-800-659-5917 or visit the web site: www.craftsman.com in all cases above, if part repair or replacement is impossible, the riding equipment will be replaced free of charge with the same or an equivalent model. All of the above warranty coverage is void if this riding equipment is ever used while providing commercial services or if rented to another person. This warranty covers ONLY defects in material and workmanship. Warranty coverage does NOT include: , Expendable parts (except battery) that can wear out from normal use within the warranty period, including but not limited to blades, spark plugs, air cleaners, belts, and oil filters. • Standard maintenance servicing, oiI changes, or tune-ups. ° Tire replacement or repair caused by punctures from outside objects, such as nails, thorns, .............................. stumps_0r glass. ................................................... • Tire or wheel replacement or repair resulting from normal wear, accident, or improper operation or maintenance. • Repairs necessary because of operator abuse, including but not limited to damage caused by towing objects beyond the capability of the riding equipment, impacting objects that bend the frame, axle assembly or crankshaft, or over-speeding the engine. • Repairs necessary because of operator negligence, including but not limited to, electrical and mechanical damage caused by improper storage, failure to use the proper grade and amount of engine oil, failure to keep the deck clear of flammable debris, or failure to maintain the riding equipment according to the instructions contained in the operator's manual, • Engine (fuel system) cleaning or repairs caused by fuel determined to be contaminated or oxidized (stale), in general, fuel should be used within 30 days of its purchase date. ° Normal deterioration and wear of the exterior finishes, or product label replacement. Thiswarrantygivesyou specificlegal rights, and you may also have other rightswhich vary from stateto state, Sears Brands Management Corporation, Hoffman Estates, IL 60179 2 _DANGER: This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. • Neverdirectdischarged materialtoward anyone. Avoid discharging material against a wall or obstruction. Material may ricochet back toward the operator. Stop the blades when crossing gravel surfaces, _IkWARNING: Do not coast down a hill in • Do not operate machine without the enneutral, you may lose control of the tractor. tire grass catcher, discharge chute, or other safety devices in place and working. _kWARNING: Tow only the attachments • Slow down before turning. that are recommended by and comply with • Never leave a running machine unatspecifications of the manufacturer of your tended. Always turn off blades, set tractor. Use common sense when towing. parking brake, stop engine, and remove Operate only at the lowest possible speed keys before dismounting, when on a slope. Too heavy of a load, while • Disengage blades when not mowing. on a slope, is dangerous. Tires can lose Shut off engine and wait for all parts to traction with the ground and cause you to come to a complete stop before cleaning lose control of your tractor, the machine, removing the grass catcher, or unclogging the discharge chute. _ILWARNING: Engine exhaust, some of • Qperate machine only in daylight or good its constituents, and certain vehicle compoartificial light. nents contain or emit chemicals known to • Do not operatethe machine while under the State of California to cause cancer and the influence of alcohol or drugs. birth defects or other reproductive harm. • Watch for traffic when operating near or A(_WARNING: Battery posts, terminals and crossing roadways. related accessories contain lead and lead • Useextracare when loading or unloading the machine into a trailer or truck. compounds,chemicalsknowntothe Stateof California to cause cancer and birth defects • Always wear eye protection when operating machine. or other reproductive harm. Wash hands • Data indicates that operators, age 60 after handling= years and above, are involved in a large I, GENERAL OPERATION percentage of riding mower-related injuries. These operators should evaluate • Read, understand, and follow allinstructheir ability to operate the riding mower tions on the machine and in the manual safely enough to protect themselves and before starting. others from serious injury. • Do not put hands or feet near rotating . . . "arts or under the machine Kee_ clear " Followthe manufacturer's recommenda _ P _ t_onfor wheel weights or counterweights ......................... of the discharge opening ai' all tirnes, ........................ Keep machine free of grass, leaves o • Only allow responsible adults, who are otherdebris build-up which can touch ho familiar with the instructions, to operate exhaust/engine parts and burn, Do not the machine. allow the mower to plow leaves or other • Clearthe area of objects such as rocks, debris which can cause build-up to octoys, wire, etc,, which could be picked cur. Clean any oil or fuel spillage before up and thrown by the blades. operating or storing the machine. Allow • Be sure the area is clear of bystanders machine to cool before storage, before operating. Stop machine ifanyone enters the area. • Never carry passengers. • Do not mow inreverse unless absolutely necessary. Always lookdownand behind before and while backing. _ILWARNING: In order to prevent accidental starting when setting up, transporting, adjusting or making repairs, always disconnect spark plug wire and place wire where it cannot contact spark plug, 3 IL SLOPE OPERATION Slopes are a major factor related to tossof control and tip-over accidents, which can result in severe injury or death. Operation on all slopes requires extra caution. If you cannot back uptheslope or if you feel uneasy on it, do not mow it. • Mow up and down slopes, not across. • Watch for holes, ruts, bumps, rocks, or other hidden objects. Uneven terrain could overturn the machine. Tall grass can hide obstacles. • Choose a low ground speed so that you will not have to stop or shift while on the slope. • Do not mow on wet grass, Tires may lose traction. Always keep the machine in gear when going down slopes, Do not shift to neutral and coast downhill. • Avoid starting, stopping, or turning on a slope. Ifthetireslosetraction, disengage the blades and proceed slowly straight down the slope. • Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction, which could cause the machine to roll over. • Use extra carewhile operating machine with grass catchers or other attachments; they can affect the stability of the machine. Do no use on steep slopes. • Do not try to stabilize the machine by putting your foot on the ground, • Do not mow near drop-offs, ditches, or embankments. The machine could suddenly roll over if a wheel is over the edge or if the edge caves in. • • • • • , Keep children out of the mowing area and inthe watchful care of a responsible adult other than the operator. Be alert and turn machine off if a child enters the area. Before and while backing, look behind and down for small children. Never carrychildren, evenwiththe blades shutoff. They mayfall off and be seriously injured or interfere with safe machine operation. Children who have been given rides inthe past may suddenly appear in the mowing area for another ride and be run over or backed over by the machine. Never allow children to operate the machine. Use extra care when approaching blind corners, shrubs, trees, or other objects that may block your view of a child. IV. TOWING - Tow only with a machine that has a hitch designed for towing. Do not attach towed equipment except at the hitch point. • Followthe manufacturer's recommendation for weight limits for towed equipment and towing on slopes. • Never allow children or others in or on towed equipment. • On slopes, the weight ofthetowed equipment may cause loss of traction and loss of control. • Travel slowly and aIIow extra distance to stop. V. SERVICE SAFE HANDLING OF GASOLINE To avoid personal injury or property damage, use extreme care in handling gasoline, Gasoline is extremely flammable and the III. CHILDREN "WA NJURED RNING: CHILDRENCANBE ................ BYTHiS EQUIPMENT.The American Academy of Pediatrics recommends that children be a minimum of t 2 year of age before operating a pedestrian controlled lawn mower and a minimum of 16 years of age before operating a riding lawn mower. Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them. vapors are explosive. Extinguish alt cigarettes; cigars, pipes, and other sources of ignition. ° Use only approved gasoline container. • Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling. • Never fuel the machine indoors. • Neverstorethemachineorfuelcontainer where there is an open flame, spark, or pilot light such as on a water heater or other appliances. • Never fill containers inside a vehicle or on a truck or trailer bed with plastic liner, Always place containers on the ground away from your vehicle when filling. 4 • Remove gas-powered equipment from • thetruckortrailerandrefuel itonthe ground. Ifthisisnotpossible, thenrefuel • such equipment withaportable container, rather thanfroma gasoline dispenser nozzle. • Keep thenozzle incontact withtherim . ofthefueltankorcontainer opening at alltimes untilfueling iscomplete. Donot • useanozzle lock-open device. • Iffuel isspilled onclothing, change cloth• ingimmediately. • Neveroverfillfueltank. Replace gascap andtighten securely. GENERAL SERVICE - Nevertamperwith safetydevices. Check their proper operation regularly. Keep machine free of grass, leaves, or other debris build-up. Clean oil or fuel spillage and remove any fuel-soaked debris, Allow machine to cool before storing. If you strike a foreign object, stop and inspectthe machine. Repair, if necessary, before restarting. Never make any adjustments or repairs with the engine running. Checkgrass catcher components and the discharge chute frequently and replace with manufacturer's recommended parts, when necessary. Mowerbladesaresharp. Wraptheblade or wear gloves, and use extra caution when servicing them, Checkbrakeoperationfrequently. Adjust and service as required. . • Never operate machine in a closed area. Keep all nuts and bolts tightto be surethe equipment is in safe working condition. • • Be alert and turn machine off if a child Maintain or replace safety and instruction enters the area. labels, as necessary. • Before and while backing, look behind Be sure the area is clear of bystanders and down for small children. beforeoperating. Stop machine ifanyone • Mow up and down slopes (15° Max), not enters the area. across, Never carry passengers. • Choose a low ground speed so that you Do not mowin reverse unless absolutely will not have to stop or shift while on the necessary. Always look down and behind slope. before and while backing. ° Avoid starting, stopping, or turning on a Never carry children, even with the slope, Ifthetires Iosetraction, disengage blades shut off, They may fall off and be seriously injured or interferewith safe ................. the blades and proceed slowly straight ......... machine operation, Children who have down the slope. • If machine stops while going uphill, been given rides inthe pastmay suddenly disengage blades, shift into reverse and appear in the mowing area for another back down slowly. ride and be run over or backed over by • Do notturn onstopes unless necessary, the machine. and then, turn slowly and gradually Keep children out of the mowing area . downhill, if possible. " and in the watchful care of a responsible • Whenloadingorunloadingthismachine, adult other than the operator. do not exceed the maximum recommended operation angle of 15°. • • • • • PRODUCT SPECIFICATIONS Gasoline Capacity and type: 3 Gallons/11,35 L Regular Unleaded Oil Type: (API: SG-SL) SAE 10W30 (above 32°F/0°C SAE 5W30 (below 32°F/0°C Oil Capacity: 64 Oz.l1,96 Spark Plug: Champion RC12YC (Gap: .030"/0.76 mm) Charging 15 Amps @ 3600 RPM System: L Battery: AmpiHr: Min. CCA: Case size: 28 230 U1R Blade Bolt Torque: 45-55 Ft. Lbs./62-75 Nm CONGRATULATIONS on your purchaseof a new tractor. It has been designed, engineered and manufactured to give you the best possible dependability and performance. Should youexperience any problem you cannot easily remedy, please contact a Sears or other qualified service center. We have competent, well-trained representatives and the proper tools to service or repair this tractor. Pfease read and retain this manual. The instructions will enable you to assemble and maintain your tractor properly. Always observe the "SAFETY RULES". CUSTOMER RESPONSIBILITIES • Read and observe the safety rules. • Follow a regular schedule in maintaining, caring for and using your tractor. • Follow instructions under "Maintenance" and "Storage" sections ofthis manual. . Wear proper Personat Protective Equipment (PPE) while operatingthis machine, including(at a minimum) sturdy footwear, eye protection, and hearing protection. Do not mow in shorts and/or open toed footwear. • Always letsomeone knowyou are outside mowing. an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-covered or grasscovered land unJessthe engine's exhaust system is equipped with a spark attester meeting applicable local or state taws (if any). tf a spark arrester is used, it should be maintained in effective working order by the operator. In the state ofCaliforniathe above isrequired by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands, A spark arrester for the muffler is avai[ablethroughyour nearest Searsservice center (See REPAIR PARTS manual). REPAIR PROTECTION AGREEMENTS Congratulations on making a smart purchase. Your new Craftsman® product is designed and manufactured for years of dependable operation. But like all products, it may require repair from timeto time.That's when having a Repair Protection Agreement can save you money and aggravation. Purchase a Repair Protection Agreement now and protect yourself from unexpected hassle and expense. Here's what's included in the Agreement: Expert service byour 12,000 professional repair specialists. • Unlimited service and no chargefor parts and labor on all covered repairs. Product replacement if your covered product can't be fixed. • Discount of 10% from regular price of service and service-related parts not covered by the agreement; also, 10% off regular price of preventive maintenance check. • Fast help by phone - phone support from a Sears representative on products requiring in-home repair, plus convenient repair scheduling. Once you purchasetheAgreement, asimple phone call is all that it takes for youto schedule service. Youcan call anytime day or night, or schedule a service appointment online. Sears has over 12,000 professionalrepair specialists, who have access to over 4.5 me KtnClOTpOes y to hetp prolongthelifeofyournewpurchase for years to come. Purchase your Repair Protection Agreement today! Some limitations and exclusions apply, For prices and additional information call 1-800-827-6655, SEARS INSTALLATION SERVICE For Sears professional installation of home appliances, garage door openers, water heaters, and other major home items, inthe U.S.A. call 1-8004-MY-HOME® Mower Mower © Front Wheel (2) Rear q_ (5)1-3/16 Lift Link O.D. Washem _'_j (1) Shoulder Bolt Assemblies _ (I) I-I/40.D. Washer (1) Small Retainer Springs \ (1) Front \_ Lift Link Retainer Springs \_-_ Assembly (1) Wheel _ (1) 3,/8-16 Loeknut If Equipped ® (1) Anti-Sway Bar ,J,,,,,,,,,,,,, (1) 3/40.D. Washers ,i,,,,,,,,,,,,,,,,,,, *Installed by Dealer (t) Small Retainer Springs ,, Keys !lll *Brush Guard Kit .......................... Slope Sheet (1) Oil Drain Tube (21 Keys (11 Quick Connect Your new tractor has been assembled at the factory with exception of those parts le_t unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness. TOOLS REQUIRED FOR ASSEMBLY ADJUST SEAT 1. Sit in seat. A socket wrench set will make assembly easier. Standard wrench sizes are listed. 2, Lift up adjustment lever (A) and slideseat until a comfortable position is reached (2) 7/16" wrenches Utility knife which allows you to press clutch/brake (1) 1/2" wrench Tire pressure gauge pedal all the way down. (1) 3/4" wrench Pliers 3. Release lever to lock seat in position, (1) 3/4" socket w/drive ratchet (1) 9/16" wrench Flashlight When right or left hand is mentioned in this manual, itmeanswhenyouare intheoperating position (seated behind the steering wheel), TO REMOVE TRACTOR FROM CARTON UNPACK CARTON NOTE: You may now roll your tractor off the skid, Follow the appropriate instruction • Remove all accessible loose parts and below to remove the tractor from the skid, parts cartons from carton. • Cut along dotted lines on al! four panWARNING: Before starting, read, unels of carton. Remove end panels and derstand and follow all instructions in the lay side panels flat. Operation section of this manual. Be sure • Remove mower and packing materials. tractor is in a well-ventilated area. Be sure • Check for any additional loose parts or the area in front of tractor is clear of other cartons and remove. people and objects, BEFORE REMOVING TRACTOR TO ROLL TRACTOR OFF SKID (See FROM SKID Operation section for location and TO CHECK BATTERY function of controls) 1. Lift hood to raised position. 1, Raise attachment lift lever to its highNOTE: If this battery is put intoservice after est position. month and year indicated on label (label is located between terminals) charge battery 2, Release parking brake by depressing for minimum of one hour at 6-10 amps. (See brake pedal. "BATTERY" in Maintenance section of this 3. Place freewheel control in disengaged manual for charging • 'instructions) " . positiontodisengagetransmission(See ........... For battery and battery cable installation.............. 'TOTRANSPORT _inthe Operation sec .......... see "REPLACING BATTERY" in the tion of this manual). "Service and Adjustments" section in 4. Roll tractor forward off skid. this manual. Continue with the instructionsthat follow. be! 8 TO INSTALL MOWER 1. Set Parking Brake Lever (P) And Lower Attachment Lift Lever (N). • Depress clutch/brake pedal all the way down and hold. • Pull parking brake lever (P) up and hold, release pressure from clutch/brake pedal, then release parking brake lever. Pedal should remain in brake position. Make sure parking brakewi]l holdtractorsecure. 2. Assemble front front of mower, gauge H, Front Mower Bracket VV, Front Gauge Wheel 3, Turn steering wheel mower, _CAUTION: Lift {ever (N) is spring loaded. Have a tight grip on lift lever, tower it slowly and engage in lowest position. Lift lever is located on lef_ side of fender. Mower Side Suspension Arms Retainer Spring Rear Lift Link(s) Right Side Rear Mower Bracket Front Lift Link Assembly Front Suspension Bracket Front Mower Bracket ON) to X, Shoulder Bolt Y. 1t/40.D. Washer Z. 3,/8-16 Locknut left and position • Turn steering wheel to the left as far as it wil! go and position mower on right side of tractorwith deflectorshield (Q) to the right, Front Q. A, B. C, D. E, E H, wheel Deflector ShJeld I, Left Side Rear Mower Bracket K. Belt Tension Rod L. M. Q. S. W. Locking Bracket Engine Clutch Pultey Deflector Shield Anti-Sway Bar Front Gauge Wheel 4. Slide mower under tractor. • Bring belt forward and chock belt for proper routing inali mower pulleygrooves, NOTE: Be sure mower side suspension arms (A) are pointing forward before sliding mower under tractor. • Slide mower under tractor until it is centered under tractor. • 8 D. RightSide Rear Mower Bracket S, Anti-SwayBar T. TransaxleBracket 5. Install anti-sway bar (S) (if equipped) I Anti-Sway Bar (S) 6, Towards"tl _ Mower Deck • 90 = End Integrated Washer Pivot the integrated washer end of antisway bar (S)towards mower deck bracket on right side of mower, Insert integrated washer end of bar into hole in rearmower bracket (D). Move mower as needed to insert integrated washer end of bar into rear mower bracket (D). Secure with small washer and small retainer spring as shown. End • From right side of mower, first insert 90 ° end of anti-sway bar (S) into hole in • transaxle bracket (T), located near left rear tire in front of transaxle, NOTE: Flashlight may be helpful. Anti-Swa, Bar _'] .4!:;_' _.:..................... (S) Attach mower side suspension arms (A) to chassis, Position front hole in side suspension arm (A) over pin on outside of tractor chassis and secure with large washer and large retainer spring (B). Repeat on opposite side of tractor. D. Right Side Rear Mower Bracket NOTE: Depending on model, bracket (_ may be differentthan shown but hole for anti-sway bar will be in same position/location, • 10 Attach rear lift links (C) Insert rod end of rear lift link (C) intohole (U) in tractor lift shaft suspension arm and pivot link down to mower. Lift rear corner of mower and position slot in link assembly over pin on rear mower bracket (D) and secure with largewasher and large retainer spring. Repeat on opposite side of tractor. 9 • Install Belt On Engine Clutch Pulley (M) Disengage belt tension rod (K) from locking bracket (L). o Install belt onto engine clutch pulley (M). IMPORTANT: Check belt for proper routing in all mower pulley grooves and under mandrel covers. X C. RearLift Link(S) D, Right Side Rear Mower Bracket U, Hole 8 Attach front link (E) • Turn steering wheel to position wheels straight forward. • From front of tractor, insert rod end of front link (E) through front hole in tractor front suspension bracket (F). • Move to leftside of mower and and insert large retainer spring (G) through hole in front link (E) behind front suspension bracket (F). • Insert other end of link (E) into hole in front mower bracket (H) and secure with washer and small retainer spring (J). NOTE: Requires deck lifting. M,Engine ClutchPulley Engage belt tension rod (K) on locking bracket (L), AOjLCAUTION: Belt tension rod is spring loaded. Have a tight grip on rod and engage slowly. • Raise attachment lift lever to highest position. • Ifnecessary, adjust gauge wheels before operating moweras shown inthe owner's! operator's manual. Check gauge wheels, deck level and rake settings. Front Link Location CHECK TIRE PRESSURE The tires on your tractor were overinflated atthe factory for shipping purposes. Correct tire pressure is important for best cutting performance. • Reducetirepressureto PSI shown on tires. CHECK DECK LEVELNESS For best cutting results, mower housing should be properly leveled. See "TO LEVEL MOWER" in the Service and Adjustments section of this manual. CHECK FOR PROPER POSITION OF ALL BELTS See the figures that are shown for replacing motion and mower blade drive belts in the Service andAdjustments section ofthis manual. Verifythatthe belts are routed correctly. E, F, G, H, J. M, CHECK BRAKE SYSTEM After you learn how to operate your tractor, check to seethatthe brake is operating properly. See"TO CHECK BRAKE" inthe Service and Adjustments section of this manual. Front Lift Link Assembly Front Suspension Bracket Large Retainer Spring Front Mower Bracket Small Retainer Spring Engine Clutch Pulley tl t_CHECKLIST Before you operate your new tractor, we wish to assure that you receive the best performance and satisfaction from this Quality Product. Please review the following checklist: J All assembly instructions have been completed. No remaining loose parts in carton. v f Battery isproperly prepared and charged. J" Seat is adjusted comfortably and tightened securely. v _ All tires are properly inflated. (For shipping purposes, the tires were ovednflated at the factory). _/Be sure mower deck is properly leve_ed side-to-sideifront-to-rear for best cutting results. (Tires must be properly inflated for leveling). J Check mower and drive belts, Be sure they are routed properly around pulleys and inside all belt keepers. vf Check wiring. See that all connections are still secure and wires are properly clamped. J" Before driving tractor, be sure freewheel control is in"transmission engaged" position (see "To Transport" in the Operation section of this manual). While learning how to use your tractor, pay extra attention to the following important items: J" Engine oil is at proper level. J" Fuettankisfilledwithfresh, clean, regular unleaded gasoline. J Become familiar with all controls, their location and function. Operate them before you start the engine, J" Be sure brake system is in safe operating .......condition. ........................................................................... vt Be sure Operator Presence System and Reverse Operation System (ROS) are working properly (See the Operation and Maintenance sections in this manual). #" It is important to purge the transmission before operating your tractor for the first time. Follow proper starting and transmission purging instructions (See "TO START ENGINE" and "PURGE TRANSMISSION" inthe Operation section ofthis manual). 12 These symbols mayappear onyourtractor orinliterature supplied withtheproduct. Learn andunderstand theirmeaning. R N REVERSE H NEUTRAL lkl L HIGH LOW CHOKE FAST SLOW IGNITION i,m,i ENGINE LIGHTS OFF REVERSE OPERATION ON FUEL ENGINE BATTERY ON ENGINE REVERSE START PARKING FORWARD BRAKE CRUISE MOWER HEIGI'rF MOWER SWITCH LIFT CLUTCH/BRAKE PEDAL CONTROL ®@@@® ATTACHMENT CLUTCH DISENGAGED A'n'ACHMENT CLUTCH ENGAGED OANGER, KEEP HANDS AND FEET AWAY KEEPAREACLEAR (SEE SLOPEHAZARDS SAFETY RULES SEC_ON) DANGER will result indicates in death aorhazard seriouswhich, injury.if not avoided, FREE (Automatic WARNING hazard which, if not avoided, could resultindicates in deatha or serious injury. WHEEL Modelsoniy) CAUTION indicates a hazard which, if not avoided, might result in minor or moderate injury, & CAUTION when used without the aied symbol, indicates a situation that could result in damage to the tractor and/or engine. Failure to follow instructions could result in serious injury or death. The safety alert symbol is used to identify safety information about hazards which can result in death, serious injury and/or property damage. J HOT SURFACES indicates a hazard which, if not avoided, could result in death, serious injury and/or property damage. FIRE indicates a hazard which, if not avoided, could result in death, serious injury and/or property damage. 13 KNOW YOUR TRACTOR READ THIS MANUAL AND SAFEr{ RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments, Save this manual for future reference. Our tractors conform to the applicable safety standards of the American National Standards Institute. (A) ATTACHMENT LIFT LEVER - Used to raise and lower the mower or other attach- (H) LIGHT SWITCH on and off. - Turns the headlights ments mounted to your tractor. (J) CRUISE CONTROL (B) BRAKE PEDAL - Used for braking the tractor and starting the engine, forwardmovementoftractoratdesiredspeed without holding the forward drive pedal. LEVER- Used to set (C) PARKING BRAKE - Locks clutch/brake (K) FORWARD DRIVE PEDAL -pedal into the brake position. ...................................... forward movement of tractor, - Used for (D) THROTTLE CONTROL- Used to control engine speed, (E) ATTACHMENT CLUTCH SWITCH Used to engage the mower blades, or other attachments mounted to your tractor. (M) FREEWHEELCONTROL- Disengages transmission for pushing or slowly towing the tractor with the engine off, (F) IGNITION SWITCH - Used for starting and stopping the engine. (N) CHOKE CONTROL- Used when starting a cold engine. (G) REVERSE OPERATION SYSTEM (ROS) "ON" POSITION - Allows operation of mower or other poweredattachmentwhife in reverse. (P) S ERVICE REMINDER 1HOUR METER - Indicates when service is required for the engine and mower. (L) REVERSE DRIVE PEDAL- Used for reverse movement of tractor. 14 lull i .......... i n IIH, U I IIIIIIIIl,ll,ll, I,,,I the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments We recommend safety glasses a The operationorofrepairs. any tractor can result instandard foreign objects thrown or into wide vision safety mask worn over spectacles. ............ | | |J ! NOTE: Failure to move throttle control between half and full speed (fast) position, before stopping, may cause engine to "backfire". * Turn ignition key (F) to "STOP" position and remove key. Always remove keywhen leavingtractorto prevent unauthorized use, • Never use choke to stop engine. IMPORTANT: Leaving the ignition switch in any position other than "STOP" will cause the battery to discharge and go dead, NOTE: Under certain conditions when tractor is standing idle with the engine running, hot engine exhaust gases may cause "browning" of grass. To eliminate this possibility, always stop engine when stopping tractor on grass areas. CAUTION: Always stop tractor completely, as described above, before leaving the operator's position. HOW TO USE YOUR TRACTOR TO SET PARKING BRAKE Your tractor is equipped with an operator presence sensing switch. When engine is running, any attempt bythe operator to leave the seat withoutfirst setting the parking brake will shut off the engine. t. Depress brake pedal (B) altthe way down and hold. 2, Pull parkingbrake lever (C) up and hold, release pressure from brake pedal (B), then release parking brake lever, Pedal should remain in brake position. Make sure parking brake willholdtractor secure. STOPPING MOWER BLADES • To stop mower blades, move attachment clutch controlto disengaged position (i'll). TO USE THROTTLE CONTROL (D) Always operate engine at full speed (fast). • Operating engine at less than futl speed (fast) reduces engine's operating el............ ficiency_ ................................................................. : • Full speed (fast) offers the best mower performance. (1_) Attachment Clutch Control "Engaged .... (1_) Attachment Clutch Control Disengaged" TO USE CHOKE CONTROL (N) Usechoke control whenever you are starting a cold engine. Do not use to start a warm engine. • To engage choke control, pull knob out. Stowty push knob in to disengage. GROUND DRIVE . Tostop ground drive, depress brake pedal all the way down. IMPORTANT: Forward and reverse drive pedals return to neutral position when not depressed, ENGINE • Movethrottle control (D) between half and full speed (fast) position. 15 TO MOVE FORWARD AND BACKWARD The direction and speed of movement is controlled by the forward and reverse drive pedals. 1. Start tractor and release parking brake. 2. Slowty depress forward (K) or reverse(L) drive pedal to begin movement. Ground speed increases the further down the pedal is depressed. The cutting height range isapproximately 1" to 4". The heights are measured from the ground to the blade tip withthe engine not running.These heights areapproximate andmay vary depending upon soil conditions, height of grass and types of grass being mowed. • The average lawn should be cut to approximately 2-I/2" during the cool season and to over 3" during hot months. For healthier and better looking lawns, mow often and after moderate growth. • For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut relatively high; the second to desired height, TO ADJUST GAUGE WHEELS Gauge wheels are properly adjusted when they are slightly offthe ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions. NOTE: Adjust gauge wheels with tractor on a flat level surface, 1. Adjust mower to desired cutting height (See "TO ADJUST MOWER CUTTING HEIGHT" in this section of manual). 2. With mower in desired height of cut position, gaugewheels should be assembled so they are slightly off the ground. Install gauge wheel in appropriate hole. Tighten securely. 3. Repeat for al!, installing gauge wheel in same adjustment hole. TO USE CRUISE CONTROL The cruise control feature can be used for forward travel only. SYSTEM CHARACTERISTICS The cruise control should only be used while mowing or transporting on relatively smooth, straight surfaces. Other conditions such as trimming at slow speeds may cause the cruise control to disengage. Do not use the cruise control on slopes, rough terrian or while trimmimg or turning. • With forward drive pedal depressed to desired speed, pull cruise control lever (J) up and hold while lifting your foot off the pedal, then release the lever. Todisengagethe cruise control, depress the brake pedal, tap on forward drive pedal or push the cruise control lever down. TO ADJUST MOWER CUTTING HEIGHT The position of the attachment lift lever (A) determines the cutting height. TO OPERATE MOWER Your tractor is equipped with an operator presence sensing switch. Any attempt bythe operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting offwhen operating your equipment on rough, rolling terrain or hills. 1. Select desired height of cut with attachment lift lever. 2. Start mower blades by engaging attachment clutch control, • Put attachment lift lever in desired cutting height slot. 16 TO STOP MOWER BLADES • Disengage attachment clutch control. TO OPERATE ON HILLS ,d_WARNING: Do not drive up or down hills with slopes greater than 15 ° and do not drive across any slope. Use the slope guide provided at the back of this manual. • Choose the slowest speed before starting up or down hilts. • Avoidstoppingorchangingspeedon hills, • If stopping is absolutely necessary, push brake pedal quickly to brake position and engage parking brake, • To restart movement, slowly release parking brake and brake pedal. - Slowfy depress appropriate drive pedal to slowest setting. • Make all turns slowly. J_I=CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield (S) in place. TO TRANSPORT When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheeling position, Free wheel control is located at the rear drawbar of tractor. ° Raise attachment lift to highest position with attachment lift control. • Pullfreewheel control outand into the slot and release so it is held inthe disengaged position. • Do not push or tow tractor at more than two (2) MPH. • Toreengage transmission, reverse above procedure. REVERSE OPERATION SYSTEM (ROS) Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operatorto travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position. _WARNING: Backing up with the attachment clutch engaged while mowing is strongly discouraged. Turningthe ROS"ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless absolutely necessary. USING THE REVERSE OPERATION SYSTEM Only use if you are certain no children or other bystanders will enter the mowing area. t. Depress brake pedal all the way down. NOTE; Toprotect hood from damage when 2. With engine running, turn ignition key transporting your tractoron atruck oratrailer, ........... coynte[c!gckw!se_to BQS ="ON"Position, be sure hood is closed andsecured totractor. 3. Look down and behind before and .................... use an _,ppr0pi:iate meai_sof tyinghood to ....... while backing, tractor (rope, cord, etc.). 4, Slowly depress reverse drive pedal to start movement. TOWING CARTS AND OTHER ATTACHMENTS 5. When use of the ROS is no longer needed, turn the ignition key clockwise Tow only the attachments that are recomto engine "ON" position. mendedby and comply with specifications of the manufacturer of your tractor. Use Engine "ON" Position common sense when towing. Too heavy ROS "ON" Position (Normal Operating) of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose contro] of your tractor. O 17 SERVICE REMINDER/HOUR METER Service remindershows the total number of hours the engine has run andindicateswhen the engine or mower needs servicing. After every 50 hoursof operationthe oil can icon willstay on for 2 hoursoruntila manual reset occurs. To reset the display manually turn the ignition switch to the on position,then the off position five times (1 second on, 1 second off). To service engine and mower, see the Maintenance section of this manual. Note: Service reminder runs when the ignition key is in any position but "STOP". For accurate reading, be sure key remains in the "STOP" position when engine is not running. BEFORE STARTING THE ENGINE CHECK ENGINE OIL LEVEL The engine inyour tractor has been shipped, from the factory, already filled with summer weight oil. 1. Check engine oil with tractor on level ground, 2. Unthread and remove oil flUcap/dipstick; wipe oil off. Reinsert the dipstick into the tube and rest oil fill cap on the tube. Do notthread the cap onto thetube, Remove and read oil level. If necessary, add oil until "FULL['mark on dipstick is reached. Do not overfill. 3. For cold weather operation you should change oil for easier starting (See the oil viscosity chart in the Maintenance section of this manual). 4. To change engine oil, see the Maintenance section in this manual, 5, Fill fuel tank to bottom of filler neck, Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon deposits and reduce CAUTION: Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation andformation of acids during storage. Acidic gas can damage thefuelsystem ofan engine while in storage. Toavoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel nextseason. See Storage Instructions for additional information. Never use engine or carburetor cleaner products inthe fuel tank or permanent damage may occur. TO START ENGINE When starting the engine for the first time or if the engine has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine. t. Be sure freewheel control is in the transmission engaged position. 2. Siton seat in operating position, depress brake pedal and set parking brake. 3, Move attachment clutch to disengaged position. 4. Move throttle control to fast position 5. Pull choke control out for a cold engine start attempt. For a warm engine start attempt the choke control may not be needed. NOTE: Before starting, read the warm and cold starting procedures below. 6, tnsert key into ignition and turn key clockwise to start position and release key as soon as engine starts. Do not run starter continuously for more than fifteen seconds per minute, [f the engine does not start after several attempts, push choke control in, wait a few minutes and try again. If engine still does not start, pull the choke control out and retry. WARM WEATHER STARTING (50°F/10°C and.lead oxide ........... andabove) valve life). Do 7. When engine starts, slowly push choke not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to ensure fuel freshness. ,iI_CAUTION: Wipe off any spilled oil or fuel. Do notstore, spill oruse gasoline near an open flame. IMPORTANT: When operating in temperatures below 32°F (0°C), use fresh, clean winter grade gasoline to help ensure good cold weather starting. 8, 18 control in until the engine begins to run smoothly. If the engine starts to run roughly, pull the choke control out slightly for a few seconds and then continue to push the control in slowly, The attachments and ground drive can now be used. If the engine does not accept the load, restart the engine and allow itto warm up for one minute using the choke as described above, COLD WEATHER STARTING (50°F/10°C and below) 7. When engine starts, slowly push choke control in until the engine begins to run smoothly. Continue to push the choke control insmall steps allowing the engine to accept small changes in speed and toad, until the choke control is fully in. If the engine starts to run roughly, pull the choke control out slightly for a few seconds and then continue to push the control in slowly. This may require an engine warm-up period from several seconds to several minutes, depending on the temperature. AUTOMATIC TRANSMISSION 'WARM UP Before driving the unit in cold weather, the transmission should be warmed up as follows: 1. Be sure the tractor is on level ground. 2, Release the parking brake and let the brake slowly return to operating position. 3, Allow one minute for transmission to warm up. This can be done during the engine warm up period. 4. The attachments can be used during the enginewarm-up period after the transmission has beenwarmed up and may require the choke control be pulled out slightly. NOTE: If at a high altitude (above 3000 feet) or in cold temperatures (below 32°F) the carburetor fuel mixture may need to be adjusted for best engine pe_ormance (see "TOAD JUST CARBURETOR inthe Service and Adjustments section of this manual). 2. Disengage transmission by placing freewheel control indisengaged position (See _'TOTRANSPORT" in this section of manual). 3. Sitting in the tractor seat, start engine. After the engine is running, movethrottle control to slow position. Disengage parking brake. _JLCAUTION: At any time, during step 4, there may be movement of the drivewheefs. 4. Depress forward drive pedal to full forward position andhold for five (5) seconds and release pedal. Depress reverse drive pedal to full reverse position and hold for five (5) seconds and release pedal. Repeat this procedure three (3) times. 5. Shutoff engine and set parking brake. 6. Engage transmission by placing freewheel control in engaged position (See "TO TRANSPORT" in this section of manual). 7. Sitting in the tractor seat, start engine. After the engine is running, move throttle control to half (1/2) speed. Disengage parking brake, 8. Drive tractor forward for approximately five feet then backwards for five feet. Repeat this driving procedure three times. Your transmission is now purged and now ready for normal operation. PURGE TRANSMISSION _,CAUTION: Never engage or disengage freewheel lever while the engine is running. Toensure proper operationand performance, it is recommended that the transmission be purged before operating tractor for the first time; This procedurewill remove anytrapped air inside the transmission which may have developed during shipping of your tractor. IMPORTANT: Should your transmission require removal for service or replacement, itshould be purged after reinstallation before operating the tractor, 1. Place tractor safely on a level surface that is clear of objects and open - with engine off and parking brake set, 19 MOWING TIPS • Tire chains cannot be used when the mower housing is attached to tractor. • Mower should be properly|eveled for best mowing performance. See "TO LEVEL MOWER HOUSING" in the Service and Adjustments section of this manual. • The left hand side of mower should be used for trimming. • Drive so that clippings are discharged onto the area that has already been cut. Have the cut area to the right ofthe tractor. This will result in a more even distribution of clippings and more uniform cutting. • When mowing large areas, start byturning to the right so that clippings will discharge away from shrubs, fences, driveways, etc. After one or two rounds, mow in the opposite direction making left hand turns until finished. J • If grass is extremely tall, it should be mowed twice to reduce load and possible fire hazard from dried clippings. Make first cut relatively high; the second to the desired height. • Do not mow grass when it is wet. Wet grass will plug mower and leave undesirable clumps. Allow grass to dry before mowing. • Always operate engine at full throttle when mowing to assure better mowing performance and proper discharge of material. Regulate ground speed by selecting a low enough speed to give the mower cutting performance as well as the quality of cut desired. • When operating attachments, select a ground speed that will suit the terrain and give best performance of the attachment being used. 2O A| aEFo_E SCHEDULE ............... M NTE'NANCE Check Brake Check Tire ODeral_Qn V Check operator Presence & ROS Systems Ik/ i Check Fasteners V C Chec_JReplace m Lubrication 0 Check C!e,an Ch,eck H_R if Pressure {or Loose _VERV _AeHUSE s .... Mower f EVEaV s 1r Oil _ V' V # P_ate if ....... Cooling .... if ..................... Ch_ck En_ige Oil Level if if Ikf Change Bn¢line Oil (with oil filter) Clean G I Oil {without _ oil fi_ter) n _. , .......... " (if equ!pped) I_ N Replace E clean Engine CeeI_ng Fins t_z Replace Spark Plug _ Replace Filter V' I ................. }nsbect Muffier/SperkArres_er' Oil V' q_r_ A!,r F_Iter Air Sci'ee Air Filter Paper BEFO_ V_, Ch,esk Mower Level,r_ess Check V-Belts ChP_eg_ Engine EVERY SEASONSTO.A_ ........ Steeling Trensaxle lo0 HQUNS Blades Level Debris EVERY if Chart Battery EVERY kouas_ .O_S {1_,;_ CP,rtr_ge Replace Fuel Filter ............. V _ V+2 .... if LUBRICATION CHART GENERAL RECOMMENDATIONS The warranty on this tractor does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain tractor as instructed in this manual. _Steering (_ Zerk Some adjustments will need to be made periodically to properly maintain your tractor. At least once a season, check to see if you should make any of the adjustments described in the Service and Adjustments section of this manual. Wheel Bearing Zerk Pivot Bolts Spindle Zerk Front Wheel Bearing Zerk Engine Sector Gear • At east once a year you shoud rep ace _leech -.. .......... .............................. .. ............. the spark pug, c ean or rep ace air fl ter, and check blades and belts for wear. A Zerks new spark plug and clean air filter assure proper air-fuel mixture and help your engine run better and last longer, (_General Purpose Grease ,, (_RefertoMaintenance ENGINE Section, BEFORE EACH USE 1, 2. 3. 4. 5. Check engine oil level. Check brake operation. Check tire pressure. Check operator presence and ROS systems for proper operation. Check for loose fasteners. IMPORTANT: Do not oil or grease the pivot points which have special nylon bearings. Viscous lubricants will attract dust and dirt that will shorten the life of the self-lubricating bearings. Ifyou feel they must be lubricated, use only a dry, powdered graphite type lubricant sparingly. 21 TRACTOR Always observe safety rules when performing any maintenance. BRAKE OPERATION If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced. (See "TO CHECK BRAKE" in the Service and Adjustments section of this manual). TIRES • Maintain proper air pressure in all tires (See PSI on tires). • Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber, • Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage, NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion. OPERATOR PRESENCE SYSTEM AND REVERSE OPERATION SYSTEM (ROS) Be sure operator presence and reverse operation systems are working properly. If your tractor does not function as described, repair the problem immediately. • The engine should not start unless the brake pedal is fully depressed, and the attachment clutch control is in the disengaged position. CHECK OPERATOR PRESENCE SYSTEM • When the engine is running, any attempt by the operator to leave the seat withoutfirst setting the parking brake should shut off the engine, • When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine. The attachment clutch should never operate unless the operator is in the seat. ROS "ON" Position CHECK REVERSE OPERATION (ROS) SYSTEM • When the engine is running with the ignition switch in the engine "ON" position and the attachment clutch engaged, any attempt by the operator to shift into reverse should shut off the engine, • When the engine is running with the ignition switch in the ROS "ON" position and the attachment clutch engaged, any attempt by the operator to shift into reverse should NOT shut off the engine. BLADE CARE For best results mower blades must be sharp. Replace worn, bent or damaged blades. _t, CAUTION: Use only a replacement blade approved by the manufacturer of your tractor, Using a blade not approved by the manufacturer of your tractor is hazardous, could damage your tractor and void your warranty, BLADE REMOVAL t. Raise mower to highest position to allow access to blades. NOTE: Protect your hands with gloves and/ or wrap blade with heavy cloth. 2. Remove blade bolt by turning counterclockwise. 3. Instaflnewbladewithstamped"THISSIDE UP" facing deck and mandrel assembly. IMPORTANT: To ensure proper assembly, center hole in blade must align with star on mandrel assembly. 4, Install and tighten blade bolt securely (45-55 Ft. Lbs. torque). IMPORTANT: Special blade bolt is heat treated. Mandrel ___ Bl[_lade Assembly _(4_._% _ ___) )) Alade Bolt "_%-_ /_L_ _Soeciai_.. -_",:_L_.__... _'_._ " _ " "_/'"%_._'_-_.. \_r // _q_ v_. CenterHole BATTERY Your tractor has a battery charging system which is sufficientfor normal use, However, periodic charging of the battery with an automotive charger will extend its life. • Keep battery and terminals clean. • Keep battery bolts tight. • Keep small vent holes open. • Recharge at 6-10 amperes for 1 hour. Engine "ON" Position (Normal Operating) 22 NOTE: The original equipment battery on your tractor is maintenance free. Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary. TO CLEAN BATTERY AND TERMINALS Corrosion and dirt on the battery and terminals can cause the battery to "leak" power. 1. Remove terminal guard. 2, Disconnect BLACK battery cable first then RED battery cable and remove battery from tractor. 3. Rinsethe batterywith plainwaterand dry, 4, Clean terminals and batten! cable ends with wire brush until bright, 5. Coat terminals with grease or petroleum jel]y. 6. Reinstall battery (See "REPLACING BATTERY" in the SERVICE AND ADJUSTMENTS section of this manual). TRANSAXLE MAINTENANCE The transmission fan and cooling fins should be kept clean to assure proper cooling, Do not attemptto clean fan or transmission while engine is running or while the transmission is hot. To prevent possible damage to seals. do not use high pressure water or steam to clean transaxle. • Inspect cooling fan to be sure fan blades are intactand clean. • Inspect cooling fins for dirt, grass clippings and other materials. Toprevent damageto seals, do not use compressed air or high pressure sprayer to clean cooling fins. TRANSAXLE PUMP FLUID The transaxle was sealed at the factory and fluid maintenance is not required for the life of the transaxle. Should the transaxle ever leak or require servicing, contact your nearest Sears or other qualified service center. Change the oil after every 50 hours of operation or at least once a year if the tractor is not used for 50 hours in one year. Check the crankcase oil level before starting the engine and after each eight (8) hours of operation. TO CHANGE ENGINE OIL Determine temperature range expected before oil change, All oil must meet API service classification SG-SL. • Be sure tractor is on level surface, • Oil will drain more freely when warm. • Catch oil in a suitable container, 1. Remove oil fill cap]dipstick. Be careful net to aliow dirt to enter the engine when changing oil, 2. Remove yellow cap from end of drain valve and install the drain tube onto the fitting. 3. Unlock drain valve by pushing inward slightly and turning counterclockwise. OilDrain Vaive __ Tube Drain To open,pullouton thedrainvalve, 5, After eli has drained completely, close and tock the drain valve by pushing nward and turning clockwise until the pin is in the-iocked i_ositisnasstl0wn_ 6. Remove the drain tube and replace thecap onto the end of the drain valve. 7, Refill engine with oil through oil flit dipstick tube. Pour slowly. Do not overfill. For approximate capacity see "PRODUCT SPECIFICATIONS" section of this manual, 8. Use gauge on elf fill cap/dipstick for checking level. Insert dipstick into the tube and rest the oil fill cap on the tube. Do not thread the cap onto the tube when taking reading, Keep oil at "FULC line on dipstick. Tighten cap onto the tube securely when finished, 4, V-BELTS ......................... -, .......... ;........ . CheckV-be tsToraeter ora_onanawearalter 100 hours of operation and replace if necessary, The belts are not adjustable. Replace belts if they begin to slip from wear, ENGINE LUBRICATION Only use high quality detergent oil rated with API service classification SG-SL. Selectthe oil's SAE viscosity grade according to your expected operating temperature. 23 ENGINE OIL FILTER Replace the engine oil filter every season or every other oil change if the tractor is used more than 100 hours in one year. AIR FILTER Your engine will not run properly using a dirty air filter. Service paper cartridge every two months or every 25 hours of operation, whichever occurs first, Service paper cartridge more often under dusty conditions. Replace the paper cartridge annually, or after every 100 hours of operation. TO SERVICE CARTRIDGE • Replace a dirty, bent, or damaged cartridge. Handle new cartridge carefully; do not use if the rubber seal is damaged. NOTE: Do not wash the paper cartridge or use pressurized air, as this will damage the cartridge. 1. Open door (A) on the blower housing to access the air cleaner element (B). CLEAN AIR SCREEN Air screen must be kept free of dirt and chaff to prevent engine damage from overheating, Clean with a wire brush or compressed airto remove dirt and stubborn dried gum fibers. CLEAN AIR INTAKE/COOLING AREAS To ensure proper cooling, make sure the grass screen, cooling fins, and other external surfaces of the engine are kept clean at all times. Every 100 hours of operation (more often under extremely dusty, dirty conditions), remove the blower housing and other cooling shrouds. Clean the cooling fins and external surfaces as necessary. Make surethe cooling shrouds are reinstalled. NOTE: Operating the enginewith ablocked grass screen, dirty or plugged cooling fins, and/or cooling shrouds removed will cause engine damage due to overheating. MUFFLER Inspect and replace corroded muffler and spark arrester (if equipped) as it could create a fire hazard and/or damage. SPARK PLUG(S) Replace spark plug(s) at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in "PRODUCT SPECIFICATIONS" section of this manual, IN-LINE FUEL FILTER The fuel filter should be replaced once each 2. Unhook the latch (C) and remove the season. If fuel filter becomes clogged, obelement. structing fuel flowto carburetor, replacement is required. 1. With engine cool, remove filter and plug fuel fine sections. 2. Place newfuel filter in position infueJ line with arrow pointing towards carburetor. 3, Be sure there are no fuel line leaks and ..............clamps are properly positioned ..................... 4. ]mmediatelywipe up anyspilled gasoline. Clamp.... /-_.___. FuelFilter -_-__ 3. Gentlytap the paper element to dislodge dirt. 4. Clean all air cleaner components of any accumulated dirt or foreign material. Prevent any dirt from entering the throat of carburetor. 5. Install cleaned or new element on the base and secure with latch. 6. Close and latch the door. 24 O,amp CLEANING • Clean engine, battery, seat, finish, etc. of all foreign matter. • Clean debris from steering plate, Debris can restrict clutch/brake pedal shaft movement, causing belt slip and loss of drive. 4. -_ CAUTION: Avoid all pinch points and movable parts Pull back the lock collar of the nozzle adapter and push the adapter onto the deck washout port at the left end of the mower deck. Release the lock collar to lock the adapter on the nozzle. IMPORTANT: Tug hose ensuring connection is secure. 5. Turn the water on. Clutch/brake pedal Clean top side Steerin Steering System, Dash, Fender and Mower _{ot Shown _ _ CAUTION; Pinch Points 6. • Keep finished surfaces and wheeis free of all gasoline, oi!, etc. . Protect painted surfaces with automotive type wax. We do not recommend using a garden hose or pressure washer to clean your tractor unless the engine and transmission are covered to keep water out, Water in engine or transmission will shorten the useful life of your tractor. Use compressed air or a leaf blower to remove grass, leaves and trash from tractor and mower. DECK WASHOUT PORT Your tractor's deck is equipped with a washout port on its surface as part of its deck wash system. It should be utilized after each use, 1. Drive the tractor to a level, clear spot While sitting in the operator's position on the tractor, re-start the engine and place the throttle lever in the Fast ",t_" position, IMPORTANT: Recheck the area making certain the area is clear. 7, Move the tractor's attachment clutch control to the "ENGAGED" position. Remain in the operator's position with the cutting deck engaged untilthe deck is cleaned. 8. Move the tractor's attachment clutch control to the "DISENGAGED" position. Turn the ignition key to the STOP position to turn the tractor's engine off. Turn the water off. 9. Pull back the lock collar of the nozzle adapter to disconnect the adapter from the nozzle washout port. 10. Move the tractor to a dry area, preferably a concrete or paved area. Place on your-lawn, nearenough to a water .................... . the the attachment clutch control in spigot for your garden hose to reach. ................... "ENGAGED" position to remove excess IMPORTANT: Make certain the tractor's water and to help dry before putting the discharge chute is directed AWAY from your tractor away. house, garage, parked cars, etc. Remove bagger chute or mulch cover if attached. 2, Make surethe attachment clutch control is in the "DISENGAGED" position, set the parking brake, and stop the engine, 3. Thread the nozzle adapter (packaged with your tractor's Operator's Manual) onto the end of your garden hose. _WARNING: A broken or missing washout fitting could expose you or others to thrown objects from contact with the blade. • Replace broken or missing washout fitting immediately, prior to using mower again. Plug any holes in mower with bolts and Iocknuts. 25 WARNING: TO AVOIDSERIOUSINJURY,BEFOREPERFORMINGANY SERVICEOR ADJUSTMENTS: •• 4. 5. 6. Depress clutch/brake pedal fully and set parking brake. Place attachment clutch in "DISENGAGED" position. Turn ignition key to "STOP" and remove key, Make sure the blades and all moving parts have completely stopped. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug• 7. Go to other side of mower anddisconnect _the suspension arm and rear lift link• CAUTION: After rear lift links are disconnected, the attachment lift teverwillbe spring loaded. Have a tight grip on liftlever when changing position of the lever. 8. From right side of mower, disconnect anti-sway bar (S) from right rear mower bracket (D) - remove retainer spring and washer and pull mower toward you until the bar fails from the hole in bracket, 9. Turn tractor steering wheel to the left as far as it will go, 10. Slide mower out from under right side of tractor, TO INSTALL MOWER Follow procedure described in "INSTALL MOWERAND DRIVE BELT" intheAssembly section of this manual. TO REMOVE MOWER I. Place attachment clutch in "DISENGAGED" position. 2. Lower attachment lift lever to its lowest position. 3, Disengage belttension rod (K)from lock bracket (L). _, CAUTION: Belt tension rod is spring loaded. Have a tight grip on rod and release slowly. 4. Remove mower belt from electric clutch pulley (M). 5. Disconnect front link (E) from mower remove retainer spring and washer. 6. Go to either side of mower and disconnect mower suspension arm (A) from chassis and rear lift link (C) from rear mower bracket (D) - remove retainer springs and washers. 26 TO LEVEL MOWER Make sure tires are properly inflated to the PSI shown on tires. If tires are over or under inflated, it may affect the appearance of your lawn and lead you to think the mower is not adjusted properly, VISUAL SIDE-TO-SIDE ADJUSTMENT 1. With all tires properly inflated and if your lawn appears unevenly cut, determine which side of mower is cutting lower. NOTE: As desired, you can raise the low side of mower or lower the high side. 2. Go to side of mower you wish to adjust. 3. With a 3/4" or adjustable wrench, turn lift link adjustment nut (A) to the left to lower the mower, or, to the right to raise the mower. Turn nut d to raise mower 4. If adjustment is necessary, see steps 2 and 3 in Visual Adjustment instructions above. 5. Recheck measurements, adjustif necessary until both sides are equal. FRONT-TO-BACK ADJUSTMENT IMPORTANT: Deck must be level sideto-side. To obtain the best cutting results, the mower blades should be adjusted so the front tip is 1/8" to I/2" lower than the rear tip when the mower is in its highest position, CAUTION: Blades are sharp, Protect your hands with gloves and!or wrap blade with heavy cloth. • Raise mower to highest position. • Position any blade so the tip is pointing straight forward, Measure distance (B) to the ground at front and reartip ofthe blade. • If front tip of blade is not 1/8" to 1/2" lower than the rear tip, go to the front of tractor. • With an 11/16" or adjustable wrench, loosen jam nut A several turns to clear adjustment nut B. • With a 3/4" or adjustable wrench, turn front link adjustment nut (B) clockwise (ltighten) to raise the front of mower, or, counterclockwise (loosen) to lower the front mower. Turn nut left to lower mower NOTE: Each full turn of adjustment nut will change mower height about 3/16", 4. Test your adjustment by mowing some uncut grass and visually checking the appearance. Readjust, if necessary, until you are satisfied with the results. PRECISION SIDE-TO-SIDE ADJUSTMENT _1 Withalltires properly inflated; parktractor ..................... on level ground or driveway. CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade Tighten adjust nut Loosen adjust with heavy cloth. B to raise mower nut B to lower 2. Raise mower to its highest position. mower 3. At both sides of mower, position blade at Loosenjam nut A first side and measure the distance (A) from bottom edge of blade to the ground. The NOTE: Each full turn of the adjustment nut distanceshould bethesame on bothsides. will change mower height about 1/8". • Recheck measurements, adjust if necessary until front tip of blade is 1/8" to t/2" lower than the rear tip. • Holdadjustment nut inposition with wrench and tighten jam nut securely against adjustment nut. 27 TO REPLACE MOWER DRWE BELT MOWER DRIVE BELT REMOVAL 1, Park tractor on a level surface, Engage parking brake, 2. Lower attachment lift lever to its lowest position, 3, Disengage belttension rod (K) from lock bracket (L), AUT1ON:Belttension rodis spring]oaded, Have afirm grip on rod and release slowly, 4. Remove screws (P) from R.H. and L,H, mandrel covers and remove covers (Q), 5. Remove any dirtor grass clippings which may have accumulated around mandrels and entire upper deck surface, 6. Remove belt from electric clutch pulley (M),both mandrel pulleys (R) and all idler pulleys (S). NOTE: Observe entire motion drive belt and position of all belt guides and keepers. 2. Disconnect clutch wire harness (A). 3. Remove anti-rotation link (B) on right side of tractor, 4, Remove belt from stationary idler (C) and clutching idler (D). 5. Remove belt from centerspan idler (E). 6. Pull belt slack toward rear of tractor. Carefully remove belt upwards from transmission input pulley and over cooling fan blades (F), 7. Remove belt downward from engine pulley and around electric clutch (G). 8, Slide belt toward rear of tractor, off the steering plate (H) and removefromtractor. BELT INSTALLATION 1. Install new belt from tractor rear to front, over the steering plate (H) and above clutch brake pedal shaft (J), 2. Pull belttoward frontoftractor and roll belt around electric clutch and onto engine pulley (G), 3. Pull belt toward rear of tractor, Carefully work belt down around transmission cooling fan and onto the input pulley (F). Be sure belt is inside the belt keeper, 4. Install belt on centerspan idler (E). 5, Install belt through stationary idler (C) and clutching idler (D), 6. Reinstall anti-rotation link (B) on right side of tractor. Tighten securely. 7. Reconnect clutch harness (A), 8. Make sure belt is in all pulley grooves and inside all belt guides and keepers. 9. Install mower (See "TO INSTALL MOWER" in this section of manual). MOWER DRIVE BELT INSTALLATION 1. Install belt around both mandrel pulleys (R) and around idler pulleys (S) asshown. 2. Install belt onto electric clutch putley (M), IMPORTANT: Check beltfor proper routing in all mower pulley grooves. 3. Reassemble R.H, and L,H. mandrel coy/_ ers (Q). Securely tighten all screws. I JU: 4. Engage belt tension rod (K) on locking k,z_' _ ......... bracket (L), ............................................................ &CAUTION: Belttension rodis springload('_ 2 ed. Have atightgrip on rodand engage slowly, _ _/ 5, Raise attachment lift lever to highest _A_ position. TO REPLACE MOTION DRIVE BELT Park the tractor on level surface. Engage parking brake, For assistance, there is a belt installationguide decal on bottom side of left footrest. BELT REMOVAL1. Remove mower (See "TO REMOVE MOWER" in this section of manual). 28 5# TO CHECK BRAKE If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced. You may also check brake by: 1. Park tractor on a level, dry concrete or paved surface, depress brake pedal all the way down and engage parking brake. 2. Disengage transmission by placing freewheel control in "transmission disengaged" position. Pull freewheel control out and into the slot and release so it is held in the disengaged position. The rear wheels must lock and skid when you tryto manually push the tractor forward. If the rear wheels rotate, then the brake needs to be serviced. Contact a Sears or other qualified service center. FRONT WHEEL TOE-IN/CAMBER Your new tractor front wheel toe-in and camber is set at the factory and is normal. The front wheeltoe-in and camber are not adjustable. If damage has occurred to affect the factory set front wheel toe-in or camber, contact a Sears or other qualified service center. TO REMOVE WHEEL FOR REPAIRS 1. Block up axle securely, 2. Remove axle cover, retaining ring and washers to allow wheel removal (rear wheels have a square key- Do not lose). 3. Repair tire and reassemble. NOTE: On rearwheels only: aligngrooves in rear wheel hub and axle. Insert square key. 4. Replace washers and snap retaining ring securely in axle groove. 5, Replace axle cover. NOTE: To seal tire punctures and prevent flat tires due to slow leaks, purchase and us#tire seatant from Sears. Tire sealant also prevents tire dry rot and corrosion, TO START ENGINE WITH A WEAK BATTERY _I_WARNING: Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries. Ifyour battery is too weak to start the engine, it should be recharged. (See "BATIERY" in the MAINTENANCE section of this manual). If "jumper cables" are used for emergency starting, follow this procedure: IMPORTANT: Your tractor is equipped with a 12 volt system. The othervehicle must also be a 12 volt system. Do not use your tractor battery to start other vehicles. TO ATTACH JUMPER CABLES 1. Connect one end ofthe RED cableto the POSITIVE (+) terminal of each battery(AB),taking care notto short against tractor chassis. 2. Connect one end of the BLACK cable to the NEGATIVE (-)terminal (C) of fully charged battery. 3, Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery. TO REMOVE CABLES, REVERSE ORDER 1. BLACK cablefirst from chassis and then from the fully charged battery, 2. RED cable last from both batteries. Weak #[.Dead Battery Washers Retaining Ring I Axle Cover _Square Key (Rear Wheel Only) 29 Ful!y Charg_td Battery REPLACING BATTERY TO REMOVE HOOD AND GRILL ASSEMBLY 1. Raise hood. 2. Unsnap headlight wire connector. 3, Stand in front of tractor. Grasp hood at sides, tilt toward engine and lift off of tractor. 4. When replacing hood, be sureto reconnect the headlight wire connector. n_asWARNING: Do not short battery termiby allowing awrench or anyother object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc. Positive terminal must be connected first to preventsparking from accidental grounding. 1. Lift hood to raised position. 2. Remove terminal cover. 3. Disconnect BLACK battery cable then RED battery cable and carefully remove battery from tractor. 4. Install new battery with terminals insame position as old battery. 5. Reinstall terminal cover. 6. First connect RED battery cable to positive (+) battery terminal with bolt and nut as shown. Tighten securely. 7. Connect BLACK grounding cable to negative (-) battery terminal with remaining bolt and nuL Tighten securely 8. Close hood. Hood Headlight Wire Connector- TRANSMISSION REMOVAL/REPLACEMENT Should yourtransmission require removalfor service or replacement, it should be purged after reinstallation and before operating the tractor. See "PURGE TRANSMISSION" in the Operation section of this manual, ENGINE TO ADJUST THROTTLE CONTROL CABLE The throttle control has been preset at the factory and adjustment should not be TO REPLACE HEADLIGHT BULB necessary Check adjustment as described 1. Raise hood. below before loosening cable. If adjustment 2. Remove bulb hotder from the hole in the is necessary, see engine manual. backside of the grill. TO ADJUST CHOKE CONTROl. 3: Replace bulb inholder and install bulb ....... The choke controi been preset at holder securely back into the hole inthe the factory and adjustment should not be backside of the grill. necessary. If adjustment is necessary, see 4. Close hood, engine manual, INTERLOCKS AND RELAYS TO ADJUST CARBURETOR Loose or damaged wiring may cause your Your carburetor has been preset at the factory tractor to run poorly,stop running, or prevent and adjustment should not be necessary. it from starting, However, minor adjustment may be required ° Check wiring. to compensate for differences in fuel, temTO REPLACE FUSE perature, altitude or load. If the engine does Replace with30 amp automotive-type plugneed adjustment, see engine manual. in fuse. The fuse holder is located behind the dash. 3O ENGINE FUEL SYSTEM IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel hose, or tank duringstorage, A[so, alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. • Empty the fuel tank by starting the engine and letting it run until the fuel lines and carburetor are empty. • Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur. • Use fresh fuel next season. NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always followthe mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allowthestabilizerto reach the carburetor. Do not empty the gas tank and carburetor if using fuel stabilizer. ENGINE OIL Drain oil (with engine warm) and replace with clean engine oil. (See"ENGINE" inthe Maintenance section of this manual), BATTERY CYLINDER(S) • Fully charge the battery for storage. 1. Remove spark plug(s). • After a period of time in storage, battery 2. Pour one ounce of oil through spark plug may require recharging. hole(s) into cylinder(s). • To help prevent corrosion and power leak3. Turn ignition key to "START" position for age during long periods of storage, battery a few seconds to distribute oil. cables should be disconnected and bat4. Replace with new spark plug(s). tery cleaned thoroughly (see "TO CLEAN BATTERY AND TERMINALS" in the OTHER Maintenance section of this-manual): ............... . uo...... ,. . not store gasol=neTromone season to o Aftercleaning, leave cables disconnected another. , and place cables where they cannot come - Replaceyourgasoline can ifyourcan starts in contact with battery terminals. to rust. Rust and/or dirt in your gasoline • if battery is removed from tractor for will cause prob]ems. storage, do not store battery directly on • If possible, store your tractor indoorsand concrete or damp surfaces. coveritto give protection from dust and dirt, • Cover your tractor with a suitable protective cover that does not retain moisture, Do not use plastic. Plastic cannot breathe which allows condensation to form andwill cause your tractor to rust. IMPORTANT: Never cover tractor while engine and exhaust areas are still warm, Immediately prepare yourtractorfor storage at the end of the season or if the tractor will not be used for 30 days or more. _IbWARNING" Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark, Allow the engine to cool before storing in any enclosure. TRACTOR Remove mower from tractor for winter storage. When mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area. 1. Clean entire tractor (See "CLEANING" in the Maintenance section of this manual), 2. Inspect and replace belts, if necessary (See belt replacement instructions in the Service and Adjustments section of this manual). 3. Lubricate as shown in the Maintenance section of this manual, 4, Be sure that all nuts, bolts and screws are securely fastened, Inspect moving parts for damage, breakage and wear. Replace if necessary. 5. Touch up all rusted or chipped paint surfaces; sand lightly before painting, 31 TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center PROBLEM CAUSE CORRECTION ,,, ,, Will not start i"'" OutoffueI. 1 Fill fuel tank. 2 Engine not "CHOKED" 2 See "TO START ENGINE" in Operation section. 3 Engine flooded. 3 Wait several minutes before attempting to start. 4 Bad spark plug. 4 Replace spark plug. 5 Dirty air filter. 5 Clean!replace Engine will not turn over ...................................... properly. air filter. 6 Dirty fuel filter. 6 Replace fuel filter. 7 Water in fuel. 7 Empty fuel tank and carburetor, refill tank with fresh gasoline and replace fuel filter. 8 Loose or damaged wiring. 8 Check all wiring. 9 Carburetor 9 See "To Adjust Carburetor" in Service and Adiustments section. ,10 Con!act a Bears or other qualified serv=ce center, 10 Hard to start' " ....... out of adjustment. Engine valves out of adjustment. 1 Dirty air filter. 1 Clean/replace 2 Bad spark plug. 2 Replace spark plug. 3 'Weak or dead battery_ 3 r Recharge or replace battery. 4 Dirty fuel filter. 4 Replace fuel filter. 5 Stale or dirty fuel. 5 Empty fuel tank and refill tank with fresh, clean gasoline. 6 Loose or damaged wiring, 6 Check all wiring. 7 Carburetor 7 See "To Adjust Carburetor" in Service and Adjustments section. 8 Engine valves out of adjustment. 8 Contact a Sears or other qualified service center. 1 Depress clutch/brake 2 Disengage out of adjustment. pedal not depressed. air filter. 1 Clutch!brake 2 Attachment 3 Weak or dead battery. 3 4 Blown fuse: ...................................... 4 Replace 5 Corroded battery terminals. 5 Clean battery terminals. 6 Loose or damaged wiring. 6 Check all wiring. 7 Faulty ignffion switch. 7 Check/replace ignition switch. 8 Faulty solenoid or starter. ;8 Check/replace solenoid 9 Faulty operator presence switch(us). 9 1 Weak or dead battery, 1 i Recharge or replace battery. 2 Corroded battery terminals. 2 Clean battery terminals. 3 Loose or damaged wiring. 3 Check at] wiring. 4 Faully solenoid or starter. 4 Check/replace clutch is engaged. pedal. attachment clutch. Recharge or replace battery. fuse: .................................. or starter Contact a Sears or other qualified service center. ,,,,,, Engine clicks but will not start 32 solenoid or starter. TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center PROBLEM CAUSE Loss of power Excessive vibration CORRECTION 1 Cutting too much grass/too fast, 1 Raise cutting height/reduce 2 Throttle in "CHOKE" position. 2 Adjust throttle control. 3 Build-up of grass, leaves and trash under mower, 3 Clean underside housing. 4 Dirty air filter. 4 Clean/replace 5 Low oil level/dirty oil. S Check oil lever/change oil. 6 Faufty spark plug, 6 Ctean®aporchangesparkplug 7 Dirty fuel filter. 7 Replace fuel filter. 8 Stale or dirty fuel, 8 Empty fuel tank and refill tank wit]' fresh, clean gasoline. 9 Water in fuel. 9 Empty fuel tank and carburetor, refill tank with fresh gasoline and replace rue] filter. 10 Spark plug wire loose. 10 Connect & tighten spark plug wire tl Dirty engine air screen/fins. 11 Clean engine air screen/fins. 12 Dirty/clogged 12 Clean/replace 13 Loose or damaged wiring. 13 Chock all wiring. 14 Carburetor0ut 14 See "To Adjust Carburetor" in Service and Adjustments section, 15 Engine valves out of adjustment. 15 Contact a Sears or other qualified service contor. muffler. of adjustment. air filter. muffler. 1 Worn, bent or loose b]ade, 1 Replace blade, Tighten blade bolt Bent blade mandrel. 2 Contact a Sears or other qualified service center. 3 Loose/damaged 3 Tighten loose part(s). Replaco damaged parts. 1 Faulty operator-safety control system. 1 Check wiring, switches and connections. If not corrected, contact a Sears or other 1 Replace bfade. Tighten blade bolt part(s). presence Poor cut - uneven 1 Worn, bent or loose blade. cutting ................................... will of mower 2 run when operator leaves seat with attachment clutchengaged Mower blades not rotate speed 2 Mower deck not level ..................... 2 3 Buildup of grass, leaves, and trash under mower. 3 Clean underside housing. 4 Bent blade mandrel. 4 Contact a Sears or other qualified service center. 5 Clogged mower deck vent from build-up of grass, leaves, and trash around mandre}s. 5 Clean around mandrels to open vent holes. 1 Obstruction 1 Remove obstruction. 2 Worn/damaged 3 Frozen idler pulley. 3 Replace idler pulley. 4 Frozen blade mandrel. 4 Contact a Sears or other qualified service center. in clutch mechanism. mower drive belt, 2 33 revel mower deck_ ........................... of mower Replace mower drive belt. TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center PROBLEM CAUSE Poor grass discharge Engine speed too slow. 1 Place thro_tle control in "FAST" position. 2 Travel speed too fast. 2 Shift to slower speed. 3 Wet grass. 3 Allow grass to dry before mowing. 4 Mower deck not Ievel. 4 Level mower deck. 5 Low/uneven 5 Check tires for proper PSi. 6 Worn, bent or loose blade. 6 Replace/sharpen blade bolt. 7 Buildup of grass, leaves and trash under mower, 7 Clean underside of mower housing. 8 Mower drive belt worn. 8 Replace mower drive belt. 9 Blades improperly 9 Reinstal[ blades sharp edge down. 10 Replace with blades listed in this manual. tire air pressure. installed. blades used. blade. Tighten Improper 11 Clogged mower deckvent holes 11 Clean around mandrels to from buildup of grass, leaves, and open vent holes. trash around mandrels. Battery will not charge 1 Light switch is "OFF". 1 2 Bulb(s) or lamp(s) 2 Replace bulb(s) or tamp(s). 3 Faulty light switch. 3 Check/replace 4 Loose or damaged wiring. 4 Check wiring and connections. 5 Blown fuse. 5 Replace fuse. burned out. Turn light switch "ON". {ight switch. 1 Bad battery ceil(s). 1 Replace battery. 2 Poor cable connections. 2 Checkjciean 3 Faulty regulator 3 Replace regulator. 4 Faulty alternator. 1 Freewheel controi in "DISENGAGED" position, 2 Debris on steering equipped), 3 (if so equipped). all connections. 4 Replace altematoro 1 P[ace freewheel control in "ENGAGED" position, 2 See "CLEANING" in the maintenance section, Motion drive belt worn. damaged. or broken. 3 Replace motion drive belt. !4 Air trapped in transmission during shipment or servicing. 4 Purge transmission. i 5 Axle key missing. 5 Install axle key at rear wheel. See "TO REMOVE WHEEL" in the Service and Adjustments section. il Engine throttle control not set 1 between half and full speed {fast) position before stopping engine, Move throttle controlbetween half and full speed (fast) position before stopping engine. Reverse operation system (ROS) is not "ON" while mower or other attachment is engaged. Turn ignition key to RO8 "ON" position. See Operation seclion. Loss of drive Engine dies when tractor is shiffea into reverse 1 10 Headlight(s) not working (if so equipped) Engine "backfires" when turning engine "OFF" CORRECTION 1 ...... plate (if 34 1 NEED MORE HELP? You'l_ find the answer and mo_e on managemyhome.com • Find this and a[[ your other product manuals on[ine. • Get answers from our team of home experts, • Get a personalized maintenance plan for your home. • Find information and tools to help with home projects. 35 - for free! 0i SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL 15 DEGREES MAX. t down the face of slopes, never across the face, Do not mow WARNING: To avoid serious injury, operate your tractor up and slopes greater than 15 degrees. Make turns gradually to prevent tipping or toss of control. Exercise extreme caution when changing direction on slopes. 1, Fold this page along dotted line indicated above. 2, Hold page before you so that its [eft edge is vertically paraf|el to a tree trunk or other upright structure. 3, Sight across the fold in the direction of hill slope you want to measure, 4. Compare the angle of the fold with the slope of the hill GarantJa.......................................................... Reglas de Segurldad ...................................... Especificaciones del Producto ........................ Montaje/Pre Operaci6n ................................... Operaci6n ....................................................... Mantenimiento ................................................ GarantJa para equipos GARANTIA COMPLETA tractores 37 38 41 43 48 56 Programa de Mantenimiento .......................... 56 Ser_icio y Ajustes ........................................... 61 Almacenamiento ............................................. 66 IdentificacJ6n de Problemas ........................... 67 ServiciO Sears ............................. Contraportada Craftsman DE CRAFTS MAN POR DOS A_IOS desde Ia fecha de compra, todas las partes no sustituibles de este equipo tractor estan garantizadas contra cua[quier defecto de material o mano de obra, Una parle no sustituible defectuosa recibir_ reparaci6n o reemplazo gratuite en casa si ta reparaci6n es imposible. POR CINCO ACJOS desde la fecha de compra, el bastJdor y el eje delantero de este equipo tractor est_n garantizados contra cualquier defecto de material o mano de obra. Un bastidor o eje delantero defectuoso recibir& reparaci6n o reemplazo gratuito en casa si la reparaciSn es imposibIe. DURANTE 90 DiAS deeds la fecha de compra, la bateria (una parte sustituible) de este equipo tractor esi#, garantizada contra cualquier defecto de material o mano de obra (nuestra prueba comprueba que no contendr& carga). Una bateria defectuosa recibir_ un reemplazo gratuito en casa. GARANTiA UMITADA DE POR VIDA ADICIONAL en el EJE DELANTERO DE HIERRO COLADO (sl est_ provisto) DURANTE EL TIEMPO EN QUE SE USE por el propieta_io original despu_s del quinto a_o a partir de Ia fecha de compra, e[ eje delantero de hierro colado (si est_ provisto) de este equipo tractos est& gamntizado contra cualquier defecto de material o mano de obra. Con el comprobante de compra, un eje delantero de hierro colado recibir_, un reemplazo gratuito en casa. SERVICIO DE GARANTiA Para conocer los detalles de la cober_ura de garantia para obtener una reparaci6n llame al 1-800-659-59I 7 6 visite el sitio web: www. craftsman.corn En todos los casos anteriores, si el reemplazo el mismo modelo o uno equivalente. es imposible, o reemp]azo el equipo tractor ser_. sustituido gratuito, sin cargo con Toda la cobertura de garantia anterior ser_, nula si este equipo tractor se utiliza alguna vez para bdndar servicios comerciales o si se alquila a otra persona. Esta garantJa cubre 0NICAMENTE defectos de material y mano de obra, La cobertura de garantia N O incluye: • Partes sustituibles (excepto la bateria) que se puedan desgastar por el uso normal dentro del periodo de garantia incluso, pero sin Iimitarse a, cuchillas, bujias, filtros de aire, correas y filtros de aceite. • Servicios de mantenimiento est_ndar, cambios de aceite o afinaciones. • Reemplazo o reparaci6n de neum_ticos por pinchazos causados por objetos externos como clavos, espinas, tocones o vidrios. • Reemplazo o reparaci6n de neum&ticos o ruedas por desgaste normal, accidentes o por operaci6n o ............. mantenimi_nto incorrectos ...................................................................................... • Reparaciones necesarias por abuso del operador incluso, pero sin limitarse a, daiSos causados por ramolcar objetos qua superen la capacidad del equipo tractor, chocar contra objetos qua doblen el bastidor' el ensamble det eje o eI cig0efial o sobrepasar Ia velocidad deI motor. • Repa_a_i_nesnecesariasp_rne_i_enciade_perad_r_inc_us_(per_sin_imitarseae_)da_se_ctric_s y mec&nicos causados per e[ almacenamiento incorrecto, por no usar el grado y la cantidad correctos de aceite de motor, por no mantener del muelle libra de residuos inflamables o por no mantener el equipo tractor de acuerdo con las instrucciones qua contiene el manual del operador. • Limpieza o reparaciones del motor (sistema de combustible) cuando se determina que se us6 combustible contaminado y oxidado (sarro). En general, el combustible debe usarse dentro de los 30 dias posteriores a su compra, • Deterioro y desgaste normal de los acabados exteriores o sustituci6n de r6tutos de productos. Esta garantla le otorga derechos legales especfficos, y usted tambi6n puede tenet otros derechos que varian de un estado a otto. Sears Brands Management Corporation, Hoffman Estates, IL 60179 37 _LPELIGRO: Esta Maquina cortadorg es capaz de amputar las manosy los pies y de ianzgr objetos, si no se observgn lag instrucciones de seguridgd siguientes se pueden producir lesiones graves o la muerte. • No maneje la m&quina si no tiene Ia trampa _,DVERTENCIA: Siempre desconecte el alampara c_sped completa, lacanaleta de descarga brg de la bujia y p6ngalo donde no pueda entrar u otros dispositivos de seguridad en su lugar en contacto con Ia bujia, para evitar el arranque yen funcionamiento. por acoidente, durante la preparaci6n, el trans• Ralentizar antes de girar. porte, el ajuste o cuando se hacen reparaciones. • Nunca dejar una m&quina encendida sin vigi_,DVERTENCIA: Noavance cuestaabajoa punlancia. Apagar siempre Ias cuchillas, poner el to muerto ya que podriaperderelcontroldel tractor. freno de estacionamiento, parar el motor, y _ADVERTENCIA: Remolque solamente Jos quitar Ias Ilaves antes de bajar, accesorios recomendados y conformes a las • Desenganche Ias hojas cuando no est6 caftancaracteristicas indicadas por el fabricante de su do c_sped. Apague el motor y espere hasta que tractor, Tenga cuidadg y prudencia al utilizar el todas las partes se detengan par completo antractor. Cuando se encuentre en un declive, oper tes de limpiarla m&quina, retirar latrampa para utilizando exclusivamente la velocidad m_.sbaja. c_sped o destapar la canaleta de descarga. En caso de un decl]ve una carga excesiva PO- Hacer funcionar la m&quina s6[o con Ia IuzdeI dria resultar peligrosa. Los neum&ticos pueden dig o Iuz artificial buena, perder Ia tracci6n con el suelo y hacerle perder • No hacer funcionar ta m_.quina estando bajo el control de su tractor. los efectos de alcohol o droga. _bADVERTENGIA: El tuba de escape del motor, • Poner atenci6n aI tr&fico cuando se opera cerca de calles o se cruzan. atgunes de sus constituyentes y algunos componentes deI veh_culo contienen o desprenden • Poner la maxima atenci6n aI cargar o descarproductos qufm]cos conocidos en el Estado de gar Ia m&quina en una caravana o cami6n. California coma causa de c&ncer y defectos al • Uevar siempre galas de protecci6n cuando se nacimiento u otros daSos reproductivos. hace funcionar Ia m&quina, _DVERTENO!A: Los barnes, terminales y ac- Los datos indicanque 1as operadores a partir de los 60 a5os est&n afectados par un gran cesorios relatives de la baterfa contienen plomo porcentajede heridas relativas a Ia conducci6n o compuestos de plomo, productos quimicos conocidos en el Estado de Califomia coma causa del cortac_sped. Estos operadores tendrian que evaluar su habifidad de hacer funcionar de c&ncer y defectos al nacimiento u otros daSos el cortac_sped de modo Io bastante seguro reproductivos. Lavgr las mgnos despu6s de para proteger a sl mismos y a otras personas mgnipulartos. de heridas graves, I. FUNCIONAMIENTO GENERAL • Seguir las recomendaciones deI fabricante •Leer, entenderyseguirtodaslasinstrucciones para los pesos y contrapesos de las ruedas. sabre la m&quina yen el manual antes de • Mantener la m_.quina libre de hierba, hojas u empezar, arras escombros que pueden toear el tuba de • No poner las manos o los pies cerca de partes escape/partes del motor calientes y quemarse. giratorias o debajo de Ia m&quina, mantener No permitir que el puente del cortac_sped siempre limpia la abertura de descarga. cargue hojas u otros residuos que pueden Permitir el funcionamiento de la m&qu!na s6!o .........causar acumulac!ones_ Limp!at toda salp!_a dura de aceite o carburante antes de hacer .......a- aduit6s=que tengan farnilia_'idad con las instrucciones. operaciones sabre ]a m&quina o guardarla. Dejarla enfriar antes de guardarla, , Limpiar el ,_rea de objetos coma piedras, juguetes, cables, etc, que pueden ser recogiII. FUNCIONAMIENTO EN PENDIENTES dos y disparados con las cuchillas. Lgs pendientes son el mayor factor de accidentes • Asegurarse de que el _,rea est@libre de otras relativos a ia perdida de control y vuelco, que personas antes de poneda en marcha. Parar pueden causar severas heddas o muerte. El funla m&quina si alguien entra en el _.rea. cionamiento en pendientes requiere una gtenci6n • Nunca ]levar pasajeros. extra. Si no es posible hacer marcha atr_s en una ° No cortar mareha atr&s al no ser absolupendiente o si te sientes incomodo, no la cortes, tamente necesario. Mirar siempre abajo y • Cortar hacia arriba y abajo de una pendiente, detante mientras se procede atr&s. no de modo horizontal, • Nunca dirigir el matedal descargado hacia na• Poner atenciones a los hoyos, las raices, los die. Evitar descargar material contra paredes bultos, las piedras u otros objetes escondidos. u obstrucciones. El material podria rebotar El terreno irregular puede volcar la m&quina. hacia el operador. Parar las cuchillas cuando La hierba alta puede esconder obst&culos, se pasan superficies de grava. 38 • Escoger une velocidad de marcha baja de mode que no sea necesario pararse o cambiar estando en una pendiente. • No corter la hierba mojada. Las nJedas pueden perder tracci6n. Poner siempre una marcha cuendo se estA en pendientes. No poner en punto muerto e ir cueste abajo. - Evitar arrancar, perarse o giraren una pendiente. Si Ias ruedas pierden tracci6n, desconectar las cuchiltas y preceder despacio cuesta abejo en la pendiente. • Mantener rode los movimientos en Ins pendientes lentos y gradual. No hacer cambios repentinos de velocidad o direcci6n, ya que pueden causer el escape de ta mAquine. • Poner la m&xima etenci6n cuando Ia m&quina funciona con captadores de hierba u otros dispositivos enganchedos; pueden afecter la estabilided de la m&quina. No usar en pendientes empinados. ° No intentar estabilizar Ia m&quina poniendo el pie en el terreno. , No cortar cerca de bajadas, cunetes y orillas. Las m&quine puede volcarse improviSamente si una rueda est& en et borde o se hunde. II!. NIl(lOS • Tener eI m_imo cuidado cuando se acerca a cantos ciegos, arbustos, Arboles u otros objetos que pueden impedir Ia vista de niSos. IV. REMOLQUE • Remolcar s61ocon una m&quina que tenga un gancho disefiado pare remolcar. Enganchar el equipo o remolcar s61o en el punto dispuesto al efecto. • Seguir las recomendaciones del productor con respecto a los Iimites del equipo per remolcar y el remolque en pendientes. • Nunce permitir que nifios u otras personas est6n dentro del equipo per remolcar. • En pendientes, el peso del equipo remotcado puede causer la p@rdidade tracciSn y la p@rdida de control. • Viajar despacio y dejar mAs distancia pare frenar. V, SERVICIO MANIPULACION SEGURA DE LA GASOLINA Pare evitar heridas personales o defies ales cosas, porter et mAximo cuidedo ala hera de manipular la gasoline. La gasoline es extremamente inflameble y los vapores son explosives. ° Apagar redes los cigardllos, cigarros, pipas y otras fuentes de ignici6n. • Usar s61ocontenedores pare gasolina aprobados. _ADVERTENCIA: LOS NI_'4OS PUEDEN SUFRIR DANES CON EL use DE ESTE EQUIPC. La Academia Estadounidense de Pediatria • Nunca quitar el tap6n de la gasoIina o afiadir (American Academy of Pediatrics) recomienda carburante con el motor en marcha, dejar enfriar el motor antes del abastecimiento de que s61o se permita aniSos con una edad minima de 12 aries manejar m&quinas cortec_sped la gasolina. manuales, y al menos de 16 aries para manejar ° Nunca abastecer la m&quina al interior de un tractores cortac@sped. local Si el operador no pone atenci6n ata presencia • Nunca guarder ]a mdquina o el contenedor de los nifios pueden ocurrir accidentes tr&gicos. del carburante deride haya una llama abierta, chispas o una Iuz piloto come un calentador Los nir_os a menudo est_n atraldos per la m&quide agua u otros dispositivos. nay Ins actividad de cortar. No dar per hecho • Nunca Ilener Ios contenedores aI interior de de que los nifios se queden edonde estaban la un vehiculo o en una caravena o cami6n 01timevez que los vistes. ........... __ Mantener los nifios fuera de &rea de €orte y ............. re.cubiertos con un forte de pl&stico. Cotocar vigi{ados per un adulto responsable que no sea mempre loscontenedores en el terreno Iejos del vehiculo cuando se est& flenando. el operador. • Quiter el equipo de gas det cami6n o caravana • Ester alerta y apegar Ia maquina si un nifios y abastecerto en el terreno. Si no es posibie, entre en el Area. abastecer d[cho equipo con un contenedor por. Antes y durante la marcha atrAs, mirar adelante t&tiI, mAs bien que de un surtidor de gasolina. y abajo para vet si hay nifios pequeSos. • Mantener la boquflta a contacto de] borde • Nunca Hever nifios, incluso si hay Ins cuchillas del dep6s_to de carburante ota abertura del apagadas. Podrian caer y herirse seriemente contenedor durante toda la operaci6n de o interferir con el funcionamiento seguro de la abastecimiento. No utilizar un dispositivo con maquina, los niSos que se hart Ilevado precboquilla cerrada-abierta, edentemente pueden aparecer de pronto en el • Si se vierte carburante sobre la ropa, cambiArea de corte per otro paseo y ser atropellados arse Ia ropa inmediatamente. o tumbados per la m_.quina. • Nunce flenar el dep6sito m#,s de Io debido. • Nunca dejar que los nifios manipulen fa mAVolver a celocar el tap6n del gas y cerrar de quina. mode firme. 39 OPERACIONES DE SERVICIO GENERALES • Nunca haeer funcionar la m&quina en un _,rea cerrada. • Mantenertodas las t_Jercasy pemos apretados para asegurarse de que trabaja en condiciones seguras. , Nunca modificar los dispositivos de seguridad. Controlar su correcto funcionamienta regularmente, , Mantener la m&quina libre de hierba, hojas u otros residues acumutados. Limpiar las salpicaduras de aceite o carburante y quitar cualquier eosa mojada con carburante. Dejar que la m&quina se enfrie antes de guardarla. • Si se golpea un objeto ajeno, hay que pararse e inspeccionar Ia m_,quina. Reparar, si es necesario, antes de volver a porter en marcha. • Nunca hacer ning_n ajuste o reparaci6n con el motor en funci6n. • Verifique los componentes de la trampa para c_sped y la canaleta de descarga con frecuencia y sustituya con repuestos recomendados par el fabricante cuando sea necesario. • Las cuchiilas de[ cortac_sped son afiladas. Envolver la cuchilla, ponerse guantes y poner la m&xima atenci6n cuando se hacen operaciones en elias. , • Estar alerta y apagar la m&quina si un niSos antra en el &rea. Controlar el funcionamiento deI freno frecuentemente. Ajustar y hacer las operaciones de mantenimiento cuando eso sea necesario. • Antes y durante ]a marcha atr&s, mirar adelante y abajo para vet si hay niflos pequer_os. • Mantener y sustituir las etiquetas de seguridad e instrucci6n, cuando sea necesario. • Cortar hacia arriba y abajo de una pendiente (t 5° M_), no de mode horizontal. • Asegurarse de que el &tea est@libre de arras personas antes de ponerla en marcha, para la - Escoger una velocidad de marcha baja de m_quina si alguien entra en el &rea. mode que no sea necesario pararse o cambiar estando en una pendiente. • Nunca Uevar pasajeros. • Evitar arrancar, pararse o girar en una pendien• No cortar marcha atr&sal no ser absolutamente re. Si Ias ruedas pierden tracci6n, desconectar necesario. Mirar siempre abajo y delante las cuchillas y preceder despacio cuesta abajo mientras se precede atr&s. en la pendiente. • Nunca Ilevar nifios, incluso si hay las cuohillas • Si la m&quina se para mientras va cuesta apagadas. Podrian caer y herirse seriamente arriba, desconectar las cuchillas, poner la o interferir con el funcionamiento seguro de la marcha atr_s y ir hacia atr&s despacio. m&quina, los nifios que so han llevado precedentemente pueden aparecer de pronto en el • No girar estando en pendientes si no es nece&rea de carte par otro paseo y ser atropellados sario, y luego girar despacio y gradualmente o tumbados par la m_quina. cuesta abajo, si es posible. -•--Mantener-los nifios fuera deI &rea-de carte y ......... • --AI cargar o descargar lam_.quina; no sobrepase ........... vigilados per un adulto responsable que no sea et &ngulo maxima recomendado de 15°, el operador. 4O ESPECIFICACIONES DEL PRODUCTO Capacidad y Tipo de Gasoline: 3 Calories/t1.35 L Regular Sin Plomo Tipo de Aceite {API: SG-SL): SAE 10W30 (sobre 32°F/0°C SAE5W30(deabajo32°FiO°C Capacidad Aceite: 64 OzJ1,96 L de Bujfa Champion RC12YC (Abertura: .030"/0.76 Sistemade Carga: 15 Amps @3600 RPM Baterla: AmpiHr: Min, CCA: Modelo TamaP,o: Torsi6n deI Perno de la Cuchilla: 45-55 Ft. LbsJ 62-75 Nm ram) 28 230 U1R FELICITACIONES por la compm de su tractor,Ha sido diseSado, p]anificado yfabricadopare darle Ia mejor conliabilidad y el mejor rendimiento posibie. En el caeo de que se encuentre con cua[quier problema que no pueda solucionar _ci{mente, haga el favor de ponerse en contacto con un centro de servicioSears o con un otro centro de servicJo cuaIiffcado. Ouenta con representantes bien capacitados y competentes y con las herramientas adecuadas para darle servicio o para reparar este tractor. Haga el favor de leer y de guardar este manual. Estas instruc-ci0nes te permitir&n montar y mantenet su unidad en forma adecuada. Siempre observe/as "REGLAS DE SEGUR/DAD." RESPONSABILIDADES DEL CLIENTE • Lea y observe las reglas de seguridad. • Siga un programa regular de mantenimiento, cuidado y ueo de su tractor. • Siga las instrucciones descritas en las secciones "Mantenimiento" y '_,lmacenamiento" de este manual En el estado de California, la toy exige Io anterior (Secci6n 4442 deI "California Public Resources Code"). Otros estados pueden contar con otras [eyes parecidas. Las teyes federales se aplican en latierras federates. Su centre de Servicio m_s cercano tiene disponible amortiguadores de oh(spas para el silenciador, (Vea [a secci6n de Partes de Repuesto en el manual Ingl@sdel dueSo.) ACUERDOS DE PROTECClON PARA LA REPARACION Congratutaciones per su buena compra. Su nuevo producto Craftsman® est& disefado y fabricado para funcionar de mode fiable per muchos aSos. Pore come todos los productos, puede necesitar alguna reparaci6n de tanto en tanto. En este case tenet un Acuerdo de Protecci6n para la Reparaci6n puede hacedes ahorrar dinero y fastidios. Compre ahora un Acuerdo de Protecci6n para la Reparaci6n y prot6gese de molestias y gastos inesperados. Un Acuerdo inctuye los puntos siguientes: • $ervicio experto de nuestros 12.000 especia}istasprofesionales en Ia reparaci6n. • Servicio ilimitado sin cargo alguno para laspartes y Ia mane de obra sobre todas las reparaciones garantizadas. • Sustftuc{6n dei produoto si su producto garantizado no puede set arreglado. • Descuento de110% sobre el precio corriente dei servicio y de }aspartes relativas a_servicio no cubiertas pot el acuerdo; tambi_n el 10% menos sobre el precio corriente de un control de mantenimiento preventivo. • Ayuda r_pida portel6fono-soporte telef6nico por parte de un representante Sears sobre productosque requieren un arreglo en casa, y adem_.s una programaci6n sobre los arreglos m&s convenientes. Cuando se ha comprado el Acuerdo, basta con • Utilice prendas de seguridad adeeuadas al una Ilamada telef6nica para programar el servtcio. manejar Ia m&quina, incluidos (come minimo) Puede Ilamar cuando quiera, diay noche o fijar calzado de seguridad, gafas protectoras y proen linea una cita para obtener el servicio. Sears tecci6n auditiva. No utitice pantalones cortes tiene m&s de 12.000 especialistas profesionaLes y/o catzado abierto coando corte la hierba. en la reparaci6n, que tienen acceso a m&s de • lnforme siempre a alguien de que se dispone 4.5 milIones de partes y accesorios de calidad. a cortar la h erba en el exter or ...... " _ " .................................Este es e] ripe de profesionalidad con que puede ............. _I_,DVERTENCIA: Este tractor viene equipade contar para ayudar a alargar ta vida del producto que acaba de comprar, per touches aries. con un motor de combusti6n internay no se debe usar sobre, o cerca, de un terreno no desarrotlado iCompre hey su Acuerdo de Protecci6n pare ta ReparaciSn! cubierto de bosques, de arbustoe o de c@sped, o menos que eI sistema de escape del motor Se aplican algunas limitaciones y exclusiones. venga equipado con un amortiguador de chispas Para conocer los precios y tener mds Inforque cumpla con las leyes locales o estatales (si maci6n, Ilame al 1-800-827-6655. existen). Si se usa un amortiguador de chispas, SERVICIO DE INSTALAClON SEARS el eperador debe mantenerlo en condiciones de trabajo eficientes. Para ta instafaci6n profesiona! Sears de aparatos de casa, puertas de garaje, calentadores de agua y otrosimportantes articulos para [a casa, en U.S.A llamar a 1-800-4-MY-HOME® 41 Segadora (5) %3116" Arandela Rueda Delantera De La Segadora de levantamiento traseros (1) Perno (I) 1-114" Arandela (1) Rueda grande (1) 3/8-16" Tuerca de retencibn Si Los Tiene *lnstalado pot el distribuidor t1) Barra Antioscilacidn *Juego de cubierta (1) 3t4" Arandela (1) Abrazadera pequelio de retenci6n Llaves 11',I Hoja de pendiente (1) Tubo de desag_ie (21 Llaves (1) Accesorio del conexi6n 42 Su tractor nuevo ha sido montado en la f&brica con la excepci6n de aquellas partes que no se han morn tado pot razones de env(o. Para asegurarse que su tractor funcione en forma adecuada y segura todas las partes y los articulos de ferreteria que se monten tienen que ser apretados en forma segura. Use las herramientas correc_as,segtln sea necesario, para asegurarse de que estCn apretados en forma segura. AJUSTE EL ASIENTO HERRAMIENTAS NECESARIAS PARA 1. Si_ntese sobre el asiento. EL MONTAJE 2. Levante la palanca del aiuste (A) hacia arriba Un juego de tlaves de tubo facilitar& el montaje. y mueva el asiento hasta que alcance una A continuaciCn se enumeran los tamafios de las posici6n c6moda que le permita presionar llaves est&ndar. completamente sobre el pedal del embrague/ (2) Llaves de 7/16" CuchilIo freno. (4) Llaves de 1/2" Medidor de presiCn 3. Desconecte la paianca para trabar el asiento (1) Uave de 3/4" Pinzas en ta posiciCn. (1) Montura de 3t4 pulg. con mando de trinquete (1) Llaves de t/2" Linterna Cuando en este manual se mencionan los t@rminos "mano derecha" o"mano izquierda"se refierea cuando usted se encuentra en la posicidn de operaci6n {sentado/a detr&s del volante de direccibn). PARA REMOVER EL TRACTOR DE LA CAJA DE CARTON DESEMPAQUE LA CAJA DE CARTON • Remueva todas las partes sue]tas que est@n accesib]es, y Ias cajas de pares, de la caja de cartCn grande. , Cortar alo largode las lineasde puntos en todos los cuatro paneles de cartCn. Remover los paneles de cierre y aplanar los paneles laterafes. Remueva la segadora y los materiales de! embatage. Revise si hay partes sueltas adicionaies o cartdn y remuCvalas. ANTES DE REMOVER EL TRACTOR DE LA CORREDERA AVISO: Ahora puede rodar su tractor fuera de la corredera. Siga las siguientes instrucclones para remover el tractor de la corredera. _ADVERTENC1A: Antes de empezar, leer, entender y seguir todas ]as instrucciones presentes en {a secoiCn Operaciones de este manual. Asegurarse que el tractor est@en un &tea bien ventilada. Asegurarse que la zona delante deI tractor est@Ubre de otras personas y objetos. PARA HACER FUERA DE LA SECClON DE LA LOCALIDAD VERIFIQUE RODAR EL TRACTOR CORREDERA;(VEA LA LA OPERAC!ON PARA Y LA FUNCION DE LOS LA BATERiA CONTROLES) 1. Levante det capota a la posiciCn levantada. • Levante la palanca de tevantamiento del accesorio a su posici6n m&s alta. AVISO: Siesta bateria esta utitizadadespu_s deI • Suelte el freno de estacionamiento presionmes y aSo indicado sobre Laetiqueta (Ia etiqueta ando el pedal det embragueifreno. que se encuentra entre los terminales), cargue la Ponga el control de Ia rueda libre en Ia bateria por un m|nimo de una hora a 6-t0 amps. posicibn de giro libre para desenganchar (Vea "BATERIA" en la secciCn de Mantenimento de este manUaI); ..................................................................................... ta transmisiCn: (Vea "PARA TRANSPOR o TAR" en la secci6n de Operaci6n de este Para instale fa bateria, y cable de la manual). bateria, realice el procedimjento descrito en Haga rodar el tractor hacia delante fuera de "REEMPLAZAR LA BATERI_' det capitulo de ]a corredera. Servicio y Ajustes de este manual. Continuar con las siguientes instrucciones. 43 INSTALE LA SEGADORA Y LA CORREA DE TRANSMISION Accione la palanca del freno de estacionamiento (P) y ia palanca de levantamiento del aecesorio inferior (N). Presione el pedal de embrague/freno cornpletamente hasta abajo y mant_ngato apretado, Tire y mantenga la patanca del freno de estacionamiento (P) haciaarriba, libere la presi6n deI pedal de embrague/freno y,luego, sueite ]a palancadelfreno deestacionamiento. El pedal debe permanecer en posici6n de frenado. Aseg_rese de que el freno de estacionamiento mantendr& asegurado el tractor, HeEscuadradelacortadoradec_speddelantera W.Rueda calibradora delantera 3, X, Perno con resa]to Y. Arandela de I_.4 Z.Tuerca de seguridad de 3/8-16 Gire el volante hacia la izquierda y ubique la cortadora de c_sped en su lugar Gire el voJante completamente hacia la izquierda y ubique la cortadora de c6sped en el lade derecho del tractor con el blindaje deflector (Q) a la derecha, Parte Delantera R Palanca c de estacionamiento A PRECAUCION: La palancade levantamiento (N) estb. accionada per resorte. Sost_ngala firmemente apretada, bdjela lentamente y eng&nchela en Ia posici6n m&s baja, La palanca de levantamiento se encuentra en el lade izquierdo de la defensa. Motor __.._ Transeje __-_._-_,_,._ije Parte Trasera 4. B, C. D. E, E H. I, K. L de_ector Deslice la cortadora de c_sped debajo del tractor Lleve la correa hacia adelante y verifiqueque sutraye ctoria sea correctaen todos los surcos de la polea de [a cortadora de c_sped. NOTA: aseg_rese de que los brazes de suspensi6n lateral de la cortadora de c(_sped (A) est_n orientados hacia adelante antes de deslizar la cortadora de c@speddebajo deI tractor. 2. Arme la ruedacalibradoradelantera (W) en la parte delantera de lacortadora de c_sped A. " Brazes De Suspensi6n Lateral De La Cortadora De C_sped Resorte De Retenci6n Eslabones De Levantamiento Traseros Escuadra Trasera Derecha De La Cortadora De C_sped Conjunto De Eslabones De Levantamiento De[anteros Escuadra De Suspensi6n Delantera Escuadra De La Cortadora De C_sped Delantera Escuadra Trasera Izquierda De La Cortadora De C_sped Varilla Tensora De La C0rrea Escuadra De B[oqueo M_ Polea Del Embrague Del Motor Q. Blindaje Deflector S. Barra Antibalanceo W, Rueda Galibradora Delantera 44 • Haga oscilar el extreme con la arandela integrada de la barra antibalanceo (S) hada Ia escuadra de la plataforma de la cortadora de c6sped en el lade derecho de la cortadora. Inserte el extreme con la arandela integrada de la barra en el agujero de la escuadra trasera de Ia cortadora de c6sped (D). Mueva la cortadora de c6sped segt3n sea necesario para insertar eI extreme con la arandela integrada de la barra en la escuadra trasera de la cortadora de c6sped (D). Deslice la cortadora de c6sped debaj0 del tractor hasta que se encuentre centrada debajo del tractor. • Asegure con una arandela pequeSa y un resorte de retenci6n pequeSo, come seilustra. A. Brazes de suspensi6n lateral de la cortadora de c@sped Q. Blindaje deflector 5. Si latiene, instale la barraanUbalaneeo Barra antibalanceo (S) Hacia el lranseje Hacia la plataforma'_ (S) o ...... I I I ExtremeEn90° ExtremeConArandefalntegrada/ Desde eI Iado derecho de Ia cortadora de c@sped,inserte primero el extreme en 90" de Ia barra antibalanceo (S) dentro de1agujero de la escuadra de transeje (T), ubicado cerca de la rueda trasera izquierda adelante del transeje. NOTA: Puede resultar t3tit usar una linterna. D. Eseuadra trasera derecha de Ia cortadora de c6sped --. Barra antibalanceo T. Escuadra transeje 6, Instale los brazes de suspensi6n lateral de la cortadora de e6sped (A} en el chasis Ubique el agujero delantero de1 braze de suspensi6n lateral (A) sobre la chaveta en la parte exterior deI chasis del tractor y asegure con una arandela grande y un resorte de retenci6n grande (B). Repita en el lade opuesto del tractor, dec@sped 7. NOTA: dependiende det modelo, la escuadra {t) puede ser diferente de la que se ilustra, pete el agujero para Ia barra antibalanceo estar& en ta misma posici6niubicaci6n. • 45 lnstale los eslabones de levantamiento traseros ((3) Inserte el extreme de varilla del eslab6n de levantamiento trasero (C) dentro del agujero (U) en el braze de suspensi6n deI eje de Ievantamiento del tractor y haga oscilar el eslab6n hacia abajo hacia la cortadora de c6sped. Levantelaesquinatraseradelacortadorade c6sped y ubique laranura en el conjunto de eslabones sobrelachavetaen laescuadratrasera de ta cortadora (D); asegure con una arandela grande y un resorte de retenci6n grande. Repita en el lade opuesto del tractor. 9. lnstale la correa en la polea del embrague del motor (M) • Desenganche Ia varilia tensora de la correa (K) de la escuadra de bloqueo (L). (Vea el diagrarna completo en la p_.gina 1.) Instale la correa en la polea del embrague det motor (M) IMPORTANTE: Verifique qua la trayectoria de la correa sea correcta en todos los surcos de la polea de la cortadora de c_sped y debajo de las cubiertas de mandril D.Escuadra trasera derecha delacortadora dec_sped U.Agujero 8. instale el eslabbn delantero (E) • Gire el volante hasta ubicar las ruedas derechas en posici6nde avance, • Desde ta parte delantera del tractor,inserte el extrerno de vadlla del eslab6n delantero (E)a traves deI agujero delantero de la escuadra de suspensi6n delantera deI tractor (F), • Mu_vase hasta e[ lado izquierdo de ]a cortadora e inserte unresorte de retenci6n grande (G) atraves del agujero del eslab6n delantero (E) detr#.s de la escuadra de suspensi6n deiantera (F), • Inserte el otro extremo del eslab6n (E) en et agujero de ]aescuadraderechade lacortadora de c@sped(H) y asegure con una arandela y un resorte de retenci6n pequel_o {J). NOTA: requiere Ievantar ta plataforma. Ubicacibn /" DelEslab6n / ernbrague del rn( • Enganche la varilla tensora de la correa (K) en Ia escuadra de bloqueo (L). _lb PRECAUCl6N: Eavarilla tensora de lacorrea est& accionada por resorte. Sostenga IavadHa _rrnernenteapretadayeng&nchelalentarnente. Eleve la palanca de levantarniento del accesorio hasta la posici0n m&xirna, Si es necesario, ajuste las ruedas calibradoras antes de hacer funcionar la cortadora de c@sped corno se muestra en el manual del propietario/operador. Verifique las ruedas calibradoras, el nivel de la plataforma y los ajustes del rastrillo. , _ ":>......... / REVISION DE LA PRESTON DE LAS ,-..... i _ " ............ '* LLANTAS Las tlantas en su unidad fueron infladas demasiado en la fdbrica pot razones de envio. La presi6n de las Ilantas correctas es irnportante para obtener el mejor rendirniento en el corte. • Reduzca la presi6nde los neurn&ticosa Ia PSi que se indica en estos. .......... REVISION DE LA NIVELACI6N DEL .... CON JUNTO Para obtener los mejores resultados en el corte, Ia caia de Ia segadora tiene que estar nivelada en la forma adecuada. Vea "PARA NIVELAR LA CAJA DE LA SEGADOR,_' en la secci6n de Servicio y Ajustes de este manual. REVISION DE LA POSICION ADECUADA DE TODAS LAS CORREAS Vea las figuras que aparecen para cambiar las correas de irnpulsi6n de ta cuchilla de la segadora y de movirniento en la secci6n de Ser_icio y Ajustes de este manual. Verifique qua las correas s]gan su paso correcto. / E.Conjunto de eslabones de tavantamiento delanteros E Escuadra de suspensibn delantera H. Escuadrade la cortadora de c@speddelantera J, Resorte de retenci6n pequeSo M.Polea del embrague del motor 46 REVISION DEL S|STEMA DE FRENOS Una vez que ustedhaya aprendido a manejar su tractor, ver_fiquequeet freno funcione correctamente. Ver "PARA VERtFICAR SI FUNCtONA BIEN EL FRENO" en el cap_tulo de servicio y ajustes de este manual. ,/LISTA DE REVISION Antes de operar y de disfrutar de su tractor nuevo, le deseamos que reciba el meier rend[miento y la mayor satisfaccion de este productode calidad. Haga el favor de revisar Jalista a continuacion: / Se han completado todas Ias instrucciones de montaje. J No quedan partes sueltas en la caja de cartbn. / La bateria est_ preparada y cargada en forma adecuada. ,/El asiento ha side ajustado en forrna c6moda y apretado en forma segura. /Todas tas Ilantas han side infladas en forma adecuada. (Para fines de envio, las Ilantas se inflaron dernasiado en la f&brica.) /AsegQrese que el conjunto segador est@ nivelado en forma adecuada, de lade a lade y desde adelante hacia atras, para obtener los rnejores resultados en el corte, (Las Ilantas tienen que estar infiadas en forma adecuada para fa nivelacidn.) /Revise las correas de irnpulsi6n y de la segadora. Aseg0rese que recorran el paso adecuado alrededor de las po/eas y dentro de todos los fijaderes de las correas. /Revise el alambrado, Fijese que todas las conexiones todavia est_n seguras y que los alambres est_n sujetos en forma adecuada, /Antes de conducir ei tractor, aseg0rese que el control de rueda libre este en la postci6n de "transmisi6n enganchada" (Vea "PARA TRANSPORTAR" en la seccibn de la OperaciSn de este manual), AI mismo tiempo que aprende a come usar su tractor, preste atenc4on extra a los puntos de importancia que se presentan a continuacion: /El aceite del motor tiene que Ilegar al nivet adecuado. / El estanque de combustible tiene que estar Ileno con gasolina sin piomo regular, nueva y limpia, Famiiia_rlcesecormredes=loscontroles: su ubicaci6n y su funci6n. Op@relos antes de hacer arrancar el motor. / Aseg0rese que el sistema de frenos est6 en una condici6n de operaci6n segura. /Asegurarse de que et Sisterna de Presencia dei Operador y el Sistema de Funcionarniento Arras (ROS) funcionan de mode adecuado (Vet [as Secciones de Funcionamiento y Mantenimiento en este manual). / Es importante purgar la transmisi6n antes de operar su tractor per la prirnera vez. Siga las instrucciones adecuadas para el emp_ezo y para purgar (Vea "PARA EMPESAR EL t_OTOR" y "PAPA PURGAR LATRANSMISION" en ta secci6n de la Operaci6n de este manual. 47 Estos slmbolos pueden aparecer sobre su tractor oen la Iiteratura proporcionada con el producto. Aprenda y comprenda sus significados. R N MARCHAATRAS NEUTRO "- G MOTOR APAGADO SISTEMA HALTO g !\1 BAJO ESTRANGU- R/_PIDO LAOiOt',_ (N) MOTOR MOTOR FRENO DE ENCEND1DO EN MARCHA ESTACIONAMIENTO MARCHA MARCHA LENTO N ALTURA DE BEGADORA LA LEVANTAMIENTO DE LA SEGADORA FUNCIONAM|ENTO ATRAS(ROS) LUCES ENSENDIDAS COMBUSTIBLE ACCESORIODEL EMBRAGUE ENGANCHADO BATERIA ATR,_,S HACIAADELANTE PALANCA DE MANDO CRUCERO PEDAL DE FRENOi DE EMBRAGUE ACCESORIODEL PELIGRO,GUARDELAB EMBRAGUE MANOSY LOSPiES LEJOS MANTENGAEL PEUGROSDE DESENGANCHADO AREA DESPEJADA PENDIENTES (Yeata se¢ci_,n da las reglasde segur_dad] PEUGRO muerte indica un peligro que, si no se evita, provoca o lesiones graves. ADVERTENCIA unopeligro que,graves. si no se evita, puede provooar indica muerte lesiones RUEDA L|BRE (8olamente para los modelos at_tomatico} & No seguir las siguientes instrucc[ones puede provocar heridas o muerte. Los stmbolos de aviso de seguridadse utilizan para ident#icar informaciones de seguridad relativas a peligres que puedenprovocar la muerte, heridas graves y/o dares a [a m&quina. PRECAUCION un peligro si no se evi_a, puede provocarindica lesiones ligerasque, o moderadas. PRECAUCION cuando se utiliza sin et sfmbolo de aviso, inclicauna situaci6n que puede provocar dafios al tractor ylo al motor. SUPERFICIES CALIENTES indica un peligro que, ,_,_,_,., si no se ev{ta, puede provocar ta muerte, leslones .==....= graves yfo danes a la m_quina. FUEGO indica un peligro que. si no se evita, puede provocar ]a muerte, lesiones graves ylo danos a la mdquina. 48 FAMILIARICESE CON SU TRACTOR LEA ESTE MANUAL Y LAS REGLAS DE SEGURIDAD ANTES DE OPERAR SU TRACTOR Compare Ias iiustraciones con su tractor para familiarizarse con las ubicaciones de los diversos contro/es y ajustes. Guarde este manual para referencia en eI futuro. Nuestros tractores cumpten con los est,_ndares de seguridad del American National Standard Institute. (A) PALANCADELLEVANTAMIENTO DELAC= CESORIO - Se usa para tevantar, bajar y ajustar el conjunto segador o los dem&s aocesorios montados en su tractor, (B) PEDAL DEL FRENO - Se usa para frenar el (H) INTERRUPTOR DE LA LUZ - Enciende y apaga las luces delanteras. (J) PALANCA DE MANDO CRUOERO - Se utitiza para fijar el movimiento hacia adelante del tractor a la veloc{dad deseada sin apretar el (C) PALANCA DEL FRENO DE ESTACIONAMIENTO - Asegura el pedal del embraguetfreno en la posici6ndel freno. (D) CONTROL DE ACELERACION -Se usa para controlar ta velocidad del motor, (K) PEDAL DE MARCHAADELANTE - Se utiliza para el movimiento del tractor hacia adeJante. (L) PEDAL DE MARCHA ATRAS - Se utiliza para el movimiento del tractor hacia atr_.s. (M) CONTROL DE RUEDA L1BRE =Desengancha la trans-misi6n para empujar o arrastrar. (N) CONTROL DE ESTRANGULACI6N -Se usa cuando se hace arrancar un motor fr_o. (E) INTERRUPTOR DEL EMBRAGUE DELACCESORIO - Se usa para enganchar Ias cuchillas segadoras, o los dem,_s accesorios montados en su tractor. (P) DIS POSITIVO DE AVtSO DE SERVIC]O / CRONOMETRO - lndica cu_.ndo hay que hacerles el servicio al motor y a Ia cor_adora. .(F) INTERRUPTOR DE IGNICI6N - Se usa para hacer arrancar o hacer parar el motor. (G) S ISTEMA DE FUNClqNAMIENTO HACtA ATRAS (ROS) EN POSICION ON" - Permite ia operaci6n det conjuntosegador o otto accesodo accionado mientras queen rev_s. 49 La operaci6n de cualquier tractor puede'hacer que salten objetos extraflos''j dentro de sus ojos, Io que pueda producir dafios graves en dstos. Siernpre use J anteojos de seguridad o protecciones para los ojos mientras opere su tractor J o cuando haga ajustes o reparaciones. Recomendarnos gafas de seguridad o I una m,_scara de visi6n amplia de seguridad usada,s,obre las gafas. J AVISO:Si no se mueve la palanca de mando entre la posici6n de velocidad media y maxima (r&pida), antes de pararse, se puede causar un "retomo de llama" det motor. COMO USAR SU TRACTOR PARA AJUSTAR EL FRENO DE ESTACIONAMIENTO Su tractor viene equipado con un interruptor sensor que exige la presencia del operador. Cuando el motor est_ funcionando, si el op* erador trata de bajarse del asiento sin pfimero aplicar et freno de estacionamiento, se apagar& el motor. 1. Presione el pedal (B) del freno completamente y sostenga[o. 2. Jale hacia arriba la palanca del freno de mano (C) y mant6ngata en esa posici6n; suelte gradualmente el pedal del embrague/freno (B), y luego suelte la palanca del freno de mano. El pedal tiene que quedar en Ia posici6n de freno. Aseg0rese que el freno de estacionamiento va a sujetar el tractor en forma segura. * Gire la llave de ignici6n (F) a la posici6nde apagado "STOP" y remueva la Ilave al abandonar eltractor para evitar el usono autorizado. IMPORTANTE: Dejando el interruptor de la ignici6n en cualquier posicidn otra que "STOP" causar i que la bateria se descargue (muerta). AVISO: Bajo ciertas condiciones, cuando e] tractor est& parado con el motor andando en vaclo, los gases de escape del motor caliente pueden hacer que ei c6sped se ponga "caf_." Para eliminar esta posibilidad, siempre pare el motor cuando pare el tractor en &reas con c6sped. PRECAUCI6N: Siempre pare el tractor completamente, seg0n se ha descrito anteriormente, antes de abandonar Ia posici6n del operador. PARADA OUOHILLAS DE LA SEGADORA • Mueva la control del embrague deI accesorio a [a posici6n desenganchado (r_). PARA USAR EL CONTROL DE LA ACELERACION (D) Siempre opere el motor a una ace]eraci6n completa. • Si eI motor funciona a una velocidad inferior a la m&xima (r&pida), su rendimiento disminuye. • E] rendimiento 6ptimo se obtienea la velocidad maxima (r&pida). .......... PAR.& USAR-EL CONTROL DE ESTRANGULACION (N) Use el control de estrangutaci6n cuando est_ haciendo arrancar un motor frio. No Io use para hacer arrancar un motor caliente. (1_)-Enganchado" (1'_) "Desenganchado" • Para enganchar el control de estrangulaci6n, (Engaged) (Disengaged) tire la manilta hacia afuera, Lentamente, IMPULSION DE RECORRIDO empuje la manilla hacia adentro para desengancharlo. , Para parar el mecanismo impu]sor, presione el pedal del freno completamente. IMPORTANTE: Los pedales de marcha adelante y atr&s vuelven a la posici6n neutra cuando no estdn apretados. MOTOR , Mover la palanca (D) de mando entre la posicidndevelocidad media y maxima (r&pida). 5O MOVERSE HACIA ADELANTE Y HACIA La gama de la altura de cortees de aproximaATRAS damente 1 a 4 pulgadas. Las alturas se miden Ladirecci6n ylavelocidad demovimientos est&n desde el suelo a la punta de Ia cuchilla cuando controlados per los pedales de marcha adelante y atr&s. 1. Poner en marcha el tractor y quitar el freno de mane. 2. Apretar lentamente el pedal marcha adelante (K) y atr&s {L) para iniciar el movimiento. M_s se aprieta el pedal y mayor es Ia velocidad. el motor no est_ func_;_onando.Estas alturas son aproximadas y pueden variar dependiendo de las condiciones del sueto, de la attura del c_'sped y del tipo de1c_sped que se est& segando. • Et c_sped promedio debe cortarse aproximadamente a 2-1/2 pulgadas durante la temporada fria y sobre 3 pulgadasdurante los mesas caluresos. Para obtener un e_sped m&s satudable y de meier apariencia, slegue a menudo y despuL=s de un crecimiento moderado. • Para obtener el meier rendimiento de corte, el cSsped qua tiene m&s de 6 pulgadas de altura debe segarse do sveces. Haga el primercorte relativamente alto; el segundo a la altura deseada. PARA AJUSTAR LAS RUEDAS CALIBRADORAS UTILIZAR EL MANDO CRUCERO El mande crucero se puede utilIzar sSlo durante ta marcha hacia adelante. CARACTER{STICAS TI_CNICAS El control de velocidad crueero s61odebe usarse mientras eL tractor est_ en labores de siega o transportaci6n, movi_ndose sobre supeflicies qua est_n relativamente planas y rectas. Otras condiciones de trabajo, come la poda, qua requiere velocidades bajas, podrian desengranar el control de velocidad crucero. No emplee el control de velocidad crucero mien_a-as el tractor se desplaza per elevacioneso terrenos escarpados o mientras el tractor est_ en labores de poda o virando. I. Con et pedal (P0de marcha adetante apretado a la velocidad deseada, mover la palanca de mando de crucero haoia adelante hasta la pesici6n "SET" y mantenerla mientras se tevanta el pie del pedal, luego soltar la palanca (J) de mando de crucero. Para desconectar el mando de crucero, e pujar la palanca hacia atr&s en la posici6n "OFF", o apretar completamente el pedal del freno. Las ruedas calibradoras est_n bien ajustadas cuando se encuentran un poco a distancia deI terreno al mismo tiempo que la segadora est_ a fa altura de corte deseada. Entonces Ias ruedas calibradoras mantienen el conjunto segador en posici6n para prevenir el corte raspeo en casi todos los terrenos. AVtSO: Ajuste las ruedas calibradoras con et tractor en una superficie nivelada p]ana, 1. Ajuste Ia segadora a Ia altura de corte deseada con la manilla de ajuste de altura (Vea "PARA AJUSTAR LAALTURA DE CORTE DE LA SEGADOR._' en [a secciSn de Operaci6n de este manual). 2. Con la segadora a ta altura deseada para la posici6n de corte, se tienen que montar las ruedas calibradoras de mode que queden un poco sobre el suelo, Instale las ruedas calibradoras en el agujero adecuado con el perno con rasalto, la arandela de 3/8, y la tuerca de seguridad de 3/8-t6 y apd_tetos en forma segura. 8. Repita el proeedimiento para el lade opuesto instalando la rueda calibradora en el mismo agujero de ajuste. PARA AJUSTAR LA ALTURA DE CORTE DE LA SEGADORA La posici6nde la palanca elevadora (B)determina aqu6 altura se cortar&eI c_sped; ....................... PARA OPERAR LA SEGADORA Su tractor viene equipada con un interrupter sensor que exige Ia presencia del operador, Si e] motor est,. funcionando y ei embrague deI accesorio est& enganchado y el eperador trata de bajarse dot asiento, se apagar_ el motor, Tiene que mantenerse sentado completa y centralmente en el asiento para impedir que el motor vacile o se apague cuando se opere su equipo en terreno disparejo, aspero o en certes. • Coloque Ia palanca etevadora en la ranura de la altura deseada. 51 1. Elija a qu_ altura cortar& el cL=spedpor medio de [a palanca elevadora. 2. Haga arrancar las euchiltas de la segadora enganchando el control deI embrague del accesorio. 5. Cuando et uso del ROSes mAs necesario, d6 vuelta a la Ilave de ignici6n en el sentido de las agujas deI reloj hasta la posici6n"ON". PARA OPERAR EN CERROS _kADVERTENCIA: No maneje hacia arriba o hacia abajo en cerros con pendientes supedores a 15° y no maneje atravesando ninguna pendiente. Utilice la guia de Ia pendiente proporcionada en ta parte posteriora de este manual. • Escoja la velocidad m&s Ienta antes de arrancar hacia arriba o hacia abajo en cerros. • Evite parar o cambiar Ia velocidad en cerros. Si esabsolutamente necesario el parar, empuje el pedal de freno r&pidamente a Ia posici6n de freno y enganche el freno de estacionamiento. • Para volver a empezar con el movimiento, suelte tentamente, el treno de estaoionamiento y el pedal de freno. - Apretar despacio el pedal apropiado hasta Ia posici6n m&s lenta. • Gire siempre lentamente. PARA PARAR LAS CUCHILLAS DE LA SEGADORA Desenganche el control del embrague del accesorio. _I.PRECAUOI6N: No opere la segadora sin, ya sea, et recogedor de c@spedcompleto en las segadoras asi equipadas o con la protecciSn contra Ia descarga en su lugar (S). PARA TRANSPORTAR Cuando empuje o arrastre su tractoraseg_rese de clesenganchar latransmisi6n poniendoel control de la rueda libre en la posici6nde marcha de ruedalibre. El controtde marchade ruedalibreesta situadoen la barra de tracci6ntrasera deItractor, 1. Levante Ia palanca de Ievantamiento de] accesorio a su posici6nm_s alta. 2. Tire del mando de la rueda libre hacia afuera y hacia abajo hasta que se coloque en [a guia y su_lta!o de manera que se mantenga en Ia posici6n de desenganchada. • No empuje o arrastre el tractor a m&s de dos (2) MPH. - Para volver a accionar Ia transrnisi6n, invierta este procedimiento. TRANSMISI6N ENGANCHADA FUNCIONAMIENTO ATRAS Tu tractor est& equipado con el Sistema de Funcionamiento Atr&s (ROS). Cualquier tentativa del operador de viajar marcha atr,_scon el embrague puesto apagar& el motor a menos que la Ilave de ignlcionse ponga en la posicibn de "ON" del ROS. ATENCION: Ir marcha atr,_s con el embrague puesto para cedar, no es recomendable, Poniendo el ROSen posici6n "ON", para permitir el funoionamiento atr_-_s con el embrague puesto, se tiene que hacer s61o cuando el operador Io considera necesario para reposicionar fa m&quina con el dispositivo embragado. No siegue en rev_s a menos que sea absolutamente necesario. USAR EL SISTEMA DE FUNCIONAMIENTO ATRAS - Utilice el tractor solamente siest& seguro de que no ingresar&n niSos ni otras personas o anirnales al &rea donde se va a cortar el cL=sped. t ; Presionar el pedal freno hasta el fonde; - ...............................TRANSMI$|(3N DESENGANCHADA2. Con el motor en marcha, girar la Ilave del interruptor de la ignici6n en et sentido inverso al AVISO: Para proteger el capota contra el da_,o cuando transporte su tractor en un cami6n o rede [as agujas del reloj hasta la posici6n "ON". 3 Mire hacia abajo y hacia atr&s no s6lo antes molcador, aseg_rese que el capota est_ cerrado y asegurado al tractor. Use los medios apropiade ir marcha atr&s, sino mientras est_ yendo marcha atr_.s, dos para amarrar el capota a! tractor (cuerdas, 4. Presione Ientamente el pedal reverso de la cordeles, etc.). impulsi6n para comenzar el movimiento. REMOLQUE DE CARRETtLLAS O OTROS ACCESORIOS Remolque solamente los accesorios recomendados y especificados pot el fabricante del tractor. Use sentido comSn cuado este remolcando. Las cargas pesadas, cuando este yendo sobre una pendiente, son peligrosas, las ilantas pueden PosiciSn Motor En pettier su tracci6n con el terreno y pueden ocaROS "On" Posicibn "On" sionar que pierda el control de eu tractor. 52 MECANtSMO DE AVISO CRON()MFTRO DE SERVICIO / Et recordatorio de servicio muestra eln_mero total de horas de funcionamiento deI motor e indica el momento en que el motor o la cortadora de c@spednecesita mantenimiento. Despu_s decada 50 horas de funcionamiento, el iconode ]ata de aceite permanece encendido durante 2 horas o hasta qua se realiza el restablecimiento manual, Para restablecer [a pantalla manua[mente, gire el interruptorde arranque a laposiciSnde encendido y despu_s a la de apagado cinco veces (1 segundo encendido, 1 segundo apagado), Para el mantenimiento del motor y de la cortadora de c@sped, consulte la secci6n Mantenimiento de este manual. NOTA: El recordatorio deservic[o seactivacuando la Uave de contacto est_ en cualquier posici6n que no sea "STOP". Para una lectura precisa, la llave debe permanecer en Ia posici6n "STOP" cuando el motor no est& en marcha. ANTES DE HACER ARRANGAR EL MOTOR REVISE EL NIVEL DE ACEITE DEL MOTOR El motor en su tractor ha sido enviado desde la f_.bricatleno con aceite de calidad para verano. 1, Revise el aceite del motor con e] tractor en terreno nivelado, 2. Destornitle y remueva la tapaivarilla indicadora de ntvel de relleno de aceite, limpie et aceite. Vuelva a insertar la vafilla indicadora de nivel en el tubo, y haga desoansar Ia tapa deI re]Ieno del aceite en el tubo, No enrosque ta tapa en e] tubo, Remueva y lea et nivetdel aceite. Si es necesario, agregue aceite hasta se lk_jue a _amarca de fIeno (FULL) en la vari_la indicadora de niveL No Io Ilene demasiado. • Para la operaci6n en clima frlo, debe cambiar et aceite para poder arrancar m_s f&cilmente (Vea 'qabta de Viscosidad De] Aceite" en Ia secci6n de Mantenimento de este manual), • Para cambiar el aceite deI motor, vea la secci6n de Mantenimiento en este manual, AGREGUE GASOLINA • Llene el estanque de combustible. Llano hasta ta parle inferior de! cueflo de re/leno PRECAUCION: Combustibles mezclados con alcohol (conocidos como gasohoI, o el uso de etanoI o metanol) pueden atraer fa humedad, ta qua conduce a la separaci6n y formaci6n de &cidos durante el a]macenamiento. La 9asolina acidlca puede da_ar el sistema del combustible de un motor durante el almaeenamiento. Para evitar los problemas con el motor, se debe vaciar el sistema de combustible antes de guardar]o pot un periodo de 30 d|as o re&s. Vaoie el estanque de combustible, haga arrancar el motor y h&galo funcionar basra que las ]ineas del combustible y el carburador queden vacios. La pr6xima temperada use combustible nuevo. Vea ias Instrucciones para el Almacenamiento para m&s informaci6n. Nunca use productos de Iimpieza para el motor o para el carburador en el estanque del combustible pues se pueden producir daSos permanentes. PARA HACER ARRANCAR EL MOTOR A1hacer arrancar el motor por Ia primera vez o si se ha acabado el combustible del motor, se necesitar& tiempo para el arranque extra para mover el combustible desde el estanque hasta eI motor. 1. Aseg_rese que el control de rueda libre este en la posici6n enganchada. 2. Si@ntaseen el sil[6n en ]a posici6n de operaci6n, suelte el pedaf de] freno y ponga el freno de estacionamiento. 3. Mueva el embrague del accesorio a ta posici6n desenganchado disengaged. 4, Mueva el control de ta aceleraci6n a ta posici6n de r_pido. 5. Tire el control de estrangulaci6n a Ia posici6n de estrangulaci6n para el arranque de un motor frio. Para el arrancar un motor caliente eLuso deI control de la estrangulaci6n puede que no sea necesarJo. AVISO: Antes de arrancar, lea las instrucciones siguientes para el arranque en clima frio y templado. 6. Inserte la tlave en la ignici6n y gire la Ilave en el sentido que giran las maniilas del reloj a Ia posici6n de arranque start, y suelte la llave tan pronto como arranque el motor, No haga funcionar el arrancador eontinuamente nnr r'n,._ ri¢_ ¢lHin_,. _t_Hrtt_o__ nnr m rtlff_ ._ =del estaoqoe=de gasoIina, Notolianade.............. masiado. Use gasolina regular, sin plomo, nueva y limpia con el mInimo de 87 octanos, (El use de gasolina con plomo aumentar& los dep6sitos de 6xido de plomo y carbono y se reducir_, la duraci6n de la v_,lvula). No mezcle el aceite con la gasolina, Para asegurar qua la gasotina utilizada sea fresca compre estanques los cuaies puedan ser utilizados durante los primeros 30 dias. tarlos, mueva el control de ta estrangulacibn haciaadentro, espere unos cuantos minutos y trate de nuevo. Si et motor sigue sin funcionar, estire del controf de la estrangu]aci6n y trate de nuevo. ARRANQUE CON TIEMPO TEMPLADO (50°F/_O°C Y MAS) 7. Cuando arranque el motor, empuje el control de la estrang ulaci6n hasta que el motor empiece a funcionar m&s suavemente. Si el motor empieza a funcionar mar, estire del control de [a estrangulaci6n un poco por unos cuantos segundos y entonces continu@ a empujar Ientamente el control. _PRECAUCI6N: Umpie el aceite o el combustible derramado, No almacene, derrame o use gasolina cerca de una llama expuesta. IMPORTANTE: Cuando se opere en temperaturas pot debajo de 32°F (0°C) use gasolina de invierno timpia y nueva para auedar a asegurar un buen arranque en cl[ma frio, 53 ................ 8. Los accesodos y el embrague de suelo ahora puede set utilizados. Si el motor no acepta esta carga, vuelva a arrancar el motor para permitide que se caliente per un minute, utilizando el estrangulador come descdbido arriba. ARRANQUE CON TtEMPO FRiO (50°F/10°C Y MENOS) 7. Cuando arranque el motor, empuje lentamente el contro_ de la estrangulaci6n hacia adentro hasta que el motor empiece a funcionar suavemente. Siga empuj&ndolo poco a poco permitiendo que el motor acepte pequeSos cambios de velocidad y carga, hasta que este completamente hacia adentro. Si el motor empieza a funcionar mal, estire del control de la estrangulaci6n un poco per unos cuantos segundos y continue a empuiar el control hacia adentro. Esto puede requerir que el motor se calJente per unos cuantes minutes, depende de Ia temperatura, CALENTAMIENTO PARA LA TRANSMISION AUTOMATIGA Antes de conducir la unidad en un tiempo frfo, la transmisi6n debe set calentada come las instrucclones siguientes: 1. Aseg(_rese que el tractor este situado en una sUpe_cie nivelada. 2. Alivie el freno de estacionamiento y deje que el freno vuelva a la posici6n de operaci6n. 3. Permita que la transmisi6n se caiiente durante un minute. Esto puede set echo durante el tiempo de calentamiento del motor, 4, Los accesorios pueden ser utiIizados durante el periodo del recalentamiento del motor despues que latransmisi6n halla side calentada ypuede requerir que el control de la estrangulaci6n sea estirado un poco. AVISO: Si se encuentra a mucha altura (sobre 3000 pies) o en clima frio (per debajo de 32°F O°C), la rnezcla del combustible del carburador debe ser ajustada para el mejor rendimiento del motor. (Vea "PARA AJUSTAR EL CARBURADOR" en la secci6n de Servicio y Ajustes de este manual). 1. Para mayor seguridad, ubique el tractor en una superflcie nivelada, despejada de cualquiet objeto y abierta, con el motor apagado y e_freno de mane puesto. 2. Desenganche la transmisiSn poniendo et control de rueda Iibre en la posici6n de desenganchado (Vea"PARA EL TRANSPORTE" en esta secci6n de este manual). 3. Sentado en el asiento dee tractor, empiece el motor, Despu@sque este corriendo el motor, mueva el control de estrangulaci6n a la posiciSn de lento. Quitar el freno de mane. _I_PREOAUCI6N: En el transcurso de_paso 4, puede que de pronto se pongan en movimiento las ruedas. 4, Apretar et pedal de marcha adelante hasta el rondo, mantener per cinco (5) segundos y soltar el pedal. Apretar el pedal de marcha atr&s hasta el fondo, mantener per cinco (5) segundos y soltar el pedal. Repetir et procedimiento tres (3) veces. 5. Apague el motor y embrague el frene de estacionamiento. 6. Enganche la transmisiSn poniendo el control de rueda Iibre en Ia posici6n de conducir (Vea "PARA TRANSPORTAR" en esta secci6n del manual). 7. Sentado en el asiento del tractor, empiece el motor. Despu_s que este corriendo el motor, mueva el control de estrangulaci6n media (1/2) velocidad. Quitar el freno de mane 8. Conduzca su tractor hacia adelante durante aproximadamente cinco pies y entonces hacia marcha atr&s cinco pies (150 cm), Repita este proceso tres (3) veces. Su transmisi6n esta ahora purgado y dispuesto para Ia operaci6n normal -,PURGAR LATRANSMISION _4_.PRECAUC16N: Nunca enganche o desenganche la palanca del control de rueda fibre cuando el motor esta funcionando. Para asegurar la operaciSn y ejecuci6n adecuada, es recomendado que la transmisi6n sea purgada antes de operar el tractor para la primera vez. Este proceso remover& cualquier aire adentro de la transmisiSn que se halla formado durante el transporte de su tractor. IMPORTANTE: Si per acaso su transmisi6ndebe ser removida para servicio o reemplazo, debe ser purgada despu_s de la reinstalaci6n y antes de operar el tractor. 54 CONSEJOS PARASEGAR • No se pueden usar Ins cadenas para InsIlantas cuando [a caja de la segadora est& adjunta al tractor. • La segadora debe estar nivelada en forma adecuada para obtener el mejor rendimiento at segar. Vea "PARA NIVELAR LA CAJA DE LA SEGADORh:' en Ia secci6n de Servicio y Ajustes de este manual. • El lado izquierdo de la segadora se debe usar para recorte. • Maneje de modo que los recortes se descarguen en el _,rea que ya ha sldo cortada, . Mantenga el &rea de cortea Ia derecha del tractor. Esto producir& una distribuci6n m&s pareja de los recortes y un corte m&s uniforme. • At segar tas &rea grandes, empiece girando a la derecha de modo que los recortes se descarguen, alej&ndose de los arbustos, cercos, entradas de autom6viles, etc. Despu6s de una o dos vueltas, siegue en la direcci6n opuesta, haciendo virajes a la izquierda, hasta que termine. • Si el c4_sped est,. demasiado alto, se debe segar dos veces para reducir la carga y los posibles peligros de incendio debido a los recortes secos. Haga el primercorte relativamente alto; el segundo a la altura deseada. • No siegue el c6sped cuando est_ mojado. El c6sped mojado taponar& la segadora y dejar& montones indeseables. Permita que se seque el c_sped antes de segarlo. - Siempre opere el motor con una aceleraei6n completa cuando siegue para asegurarse de conseguir un mejor rendimiento y una descarga apropiada de.los matedale.s. _Ftegule..... la veloctdad de recorrido seleccionando un cambio Io suficientemente bajo para obtener un rendimiento de corte de parte de su segadora y tambi_n la calidad del corte deseada. • Cuando opere con accesorios, seleccione una velocidad de recorrido que se acomode al terreno y le permita obtener el mejor rendimiento del accesorio que se est& usando. 55 ....... PROGRAMADE MANTENIM|ENTO ,111111, Rs_ar 1_opera_i6n d_ lmno V Revi=ar _1 niv_$ CAOA so HORAS CA_A F _ _S]du_ la pla_a i V ..... _ OADA TEMPOaAOA _C_AL,_E_C HOP, AS _ _4 Rev_ar el er=lttamie_lo deI transej_ Li_p_ ¢ADA HS HORAS ,HI Rs_ssr ia pms]_n de _s lla_las 0 ,.,,,, ,,,,,,,,_,,,,,_J_,.,,,,,.,,,, ,, , _, _TESD_ C_OA CAOA USO HOF;AS S V de dire=i_ ...... _ _5 Inspscc_ne _s c_';'aas trapszotde_et, R_visar el nP_elde] ace_f_ del m_t_t OMUmpi_r _=,o_,!.,_,_o_,_ _1 fill_ de airs R am_r_guax_rde de_pas ,_,_ V # if V_; V _;_ ............. ..... V_ ...... Ca._bi_r el fE_to de z_._ile (si equlp_,_o) Limp[at _ . C_b_r alst_s de e_fi,_mlonl_ V_.2 ......... = _1 fllt_ d_ comb_sf_ble V # V RECOMENDACIONES GENERALES La garantia de este tractor no cubre los articulos que han estado sujetos a] abuse o a la negtigencia del operador. Para recibir tedo el valor de [a garantia, el operador tiene que mantener Ia segadora seg_n las instrucciones descritas en este manual. Hay a[gunos ajustes que se tienen que hacer en forma peri6dica para poder mantener su tractor adecuadamente, AI menos una vez cada estac[6n comprobar si es necesario efectuar los adjustes descritos en las secciones de Servicio y Ajustes de este manual, ............................................................. • Una vez aI aSo, cambie la bujia, timpie o cambie et filtro de aire y revise si las cuchillas y las correas est_.ndesgastadas. Una bujia nueva y un filtro de aire limpio aseguran una mezcla de aire-combustible adecuada y le ayudan a que su motor funcione mejor y que dure m&s. ANTES DE CADA USO 1. Revise e] nivel del aceite dot motor. 2. Revise la operaci6n de los frenos. 3. Revise la presi6n de las llantas, 4, Verifique que el sistema de presencia del operado y ROS funcionen adecuatamente. 5, Revise si hay sujetadores sueltos. _ TABLA DE LUBRICACI6N (_)Perno articulado deI volant GrasadeI Arbol de Grasadel Rodamientode la Rueda Delantera _ Plancha delengranaje deSector de..... Direcci6n Accesorio de Grasa del Arbol Acceso_io de Grasa del Redamiento de la Rueda Delantera Motor (_)Accesorio de grasa deI mandril Grasa de propositogeneral _) Refi_rase a ta secci6n deI "MOTOR" en Mantenimiento IMPORTANTE: No aceite o engrase los puntos pJvotes, los que tienen rodamientos de niI6n especiales. Los tubricantes viscosos atraer&n polvo y mugre, 1oque acortara la duracidn de los rodamientos. Si cree que lubricarse, use solamente un tubricante ripe grafito de polvo seco en forma moderada. 56 TRACTOR Siempre observe las reglas de seguridad cuando d@mantenimiento. OPERACI6N DEL FRENO Si el tractor necesita m&s de cinco (5) pies para detenerse a la m_ima velocidad al cambio m#.s alto en una superficie nivelada, de hormig6n o pavimentada, hay que hacerle el servicio al freno. Ver "PARA VERIFICAR SI FUNCIONA BIEN EL FRENO" en el capitulo de Servicio y ajustes de este manual. LLANTAS • Mantenga todos los neum&ticos con la presi6n de aire adecuada (Ver la PSI que se indica en estos). • Mantenga las Ilantas sin gasolina, aceite o substancias qulmicas para control de insectos que pueden daSar ta goma. . Evite los tocones, las piedras, ]as grietas profundas, los objetos afilados y otros peligros que pueden da_ar alas Ilantas. AVISO: Para arregtar tas flantas perforadas y p_ra prevenir que tenga llantas pinchadas a causa de pequeSas fugas, puede comprar el sello para Ilantas de su comerciante de partes de repuesto m&s cercano. Elsetlo previene que las Ilantas se sequen y tambi@n Ia corrosi6n. SlSTEMA PRESENCIA OPERADOR Y SISTEMA FUNGIONAMIENTO ATRAS (ROS) Asegurarse de que el sistema de presencia deI operador, el sistema de trabajo y el sistema funcionamiento atr&s funcionen bien. Si tu tractor no funci6n como descrito, reparar el problema inmediatamente. Cuchilla • Cuando el motor est& en marcha, cualquier tentativa del operador de abandonar el asiento sin haber puesto el freno de estacionamiento primero, apagar& el motor. • Cuando el motorest#,en marchay el embrague del aocesodo est,. conectado, cualquier tentativa del operador de abandonar el asiento, apagar& el motor. --El embrague del accesorio no tendria que fun-cionar nuncasieloperadornoestAen su asiento Motor En Posici6n"On" VERIFII_Z SISTEMA FUNC[ONAMfENTO ATRAS (ROS) * Cuando el motor est& en marcha con el [nterruptor de llave en posici6n de motor "ON" y el embrague del accesorio conectado, cualquier tentativa del operador de viajar marcha atr&s, apagar& el motor. CUlDADO DE LA CUCHILLA Para obtener resultados 6ptimos, las cuchillasde la cortadora deben estar afiladas. Reemplace tas cuchillas que est6n gastadas, dobladas o da_adas. _PRECAUCI6N: Usar solamente la hojas de repuesto aprobada pot el fabricante de su cortac_sped. Usar una hoja no aprobada por el fabricante de su cortac6sped es peligros0, puede daSar su cortac@sped y anular su garantia. REMOCION DE LA CUCHILLA 1. Levante Ia segadora a su posici6n m,_s alta para permitir el acceso alas cuchillas. AVlSO: Proteja sus manos con guantes yio envue[va la cuchilla con una tefa gruesa. 2. Remueva el pemo de fa cuchilladandole vueItas en el sentido inversoal de Ias agujas del re[oj. 3. lnstale la nueva cuchitla o cuchilla afilada con el estampado "THIS SIDE UP" en la direccion de la segadora y del conjunto deI mandril. IMPORTANTE: Para asegurar la instalacionapropiada, posicione el agujere central de Ia cuchiita con la estrella del conjunto del mandril. 4. Instale y apriete el perno de la cuchilla firmemente (Par 45-55 pies/libras). IMPORTANTE: El perno de la cuchilla estratado a calo. Si es necessario sustituir los pernos, sustituirlos s61ocon pernos aprobados mostrados en Partes de Reparaci6n. Conjunto Mandril ° El motor no arrancar& si el pedal de embrague/freno est& completamente presionado y el mando del embrague clel accesorio est& desconectado.VERIFII_Z S1STEMA PRESENCIA OPERADOR Posici6n ROS "On" • Cuando e! motor est& en marcha con el interruptor de Ilave del sistema de funcionamiento atr&s (ROS) en la posici6n "ON" y el embrague del accesorio conectado, cualquier tentativa del operador de viajar marcha atr&s, NO apagar& el motor. 57 deI _-% ,-"_"k_ Eo,rol,a Agujero Central =BATERiA.............................................................. su tractor cuenta con un sistema de carga de la bateda que es suficiente para el uso normal. Sin embargo, si se carga la bateria peri6dicamente, con un cargador de autom6viles, se protongar& su duraci6n. • Mantenga la bateria y los terminales [impios. • Mantenga los pernos de la bateria apretados. ° Mantenga los agujeros de ventilaci6n peque_os abiertos. • Vuelva a cargar de 6-10 amperes por 1 hora. AVISO: La bateria del equipo original de su tractor no becesita servicio. No intente abrir o remover las tapas o cubiertas. No esnecesario a_adir o verificar el niveI del electr61ito. PARA LIMPIAR CA BATERiA Y LOS TERMINALES La corrosi6n y la mugre de Ia bateria y de los terminales pueden producir"escapes" de petencia en la bateria, 1, Remueva la protecci6n de los terminales, 2, Desconecte el cable de la bateria NEGRO primero y luego eI cable de la bater[a ROJO y remueva la bateria dei tractor. 3, Enjuague la bateria con agua corriente y s6quela: 4, Umpie los terminales y los extremes del cable de la bateda con un cepilIo de alambre hasta que queden brillantes. 5, Cubra los terminales con grasa o parafina. 6, Reinstale la bateria (Vea "Reemptazar la Bateda" en la seccibn do Servicio y ajustes de este manual), ENFRIAMIENTO DEL TRANSEJE L.as aletas de enfriamiento y el ventilador de la transmisibn tienen que mantenerse Iimpios para asegurar el enfriamiento adecuado. No trate de Iimpiar el ventilador o la transmisi6n cuando el motor est_ funcionando o mientras Ia transmisi6n est@caliente. • Inspeccione et ventilador de enfriamiento para asegurarse que las aspas del ventilador est_n intactas y limpias. • inspeccione Insaietas de enfriamiento para verificar si hay mugre, recortes de c_sped u otros matedales. Para impedir daSos alas juntas, no use un rociador de aire compresado o de alta presi6n para limpiar Ins aletas de enfdamiento NIVEL DEL FLUIDO DE LA BOMBA DEL TRANSEJE EI tranaeje ha side sellado en la f&brica y eI mantenimiento del fluido no es necesarie para Ia vida del transeje. En el case de que el transeje se filtrase o necesitase servicio, haga e] favor de ponerse en contacto con un centre de servicio Sears o con un otro centre de sen/icio cualilicado. Cambie eI aceite despu_s de 50 horns de operaci6n o per Io menos una vez al a_,o si el tractor se utitiza menos 50 horas el aSo. Revise eI nivel de] aceite del c&rter antes de arrancar el motor y despuL=sde cada echo (8)horas de use continuado. PARA CAMBIAR EL ACEITE DEL MOTOR Determine la gama de la temperatura esperada antes de cambiar el aceite. Todo e] aceite debe cumplir con la clasificaci6n de servicio API SG-SL. • AsegSrese que el tractor est@en unasupe_cie nivelada, • El aceite se drenar& m&s f_.cilmente cuando est@caliente. • Recoja el aceite en un envase adecuado, 1. Remueva la tapaivarilla indicadorade nivel para relleno del aceite. Tonga cuidado de no permitir que la mugre entre en eI motor cuando cambie el aceite. 2. Quite el casquiIle amarillo de la parte inferior de la v&tvula de desa¢ _e e instale el tube de desagLie sobre Ia ! uarnici6n. V&lvulade desa _e deIaceite cerrada yt bloqueada GasquilIo"_"_'_ 3. Abra la vflvula de desagQe empujando hacia dentro y dando vuelta a la izquierda. Para abnrse, tire hacia fuera la v&lvula de desagiie, 5. Despu_s de que eI aceite haya drenado tetalmente, cerrar y bloquee la v_Jvuta de CORREAS V desagLie empujando hacia dentro y dando Revise las correas V para verificar si existe vuelta en sentido de las agujas de un reloj deterioro y desgaste despu_s de 100 horas de hasta queta clavija est_ en la posici6n btooperaci6n y c&mbielas si es necesario. Las corqueada seg_n Io mostrado. teas no son ajustables. Cambie las correas si 6. Remueva et tube de desag_e y substituya empieza.n a.des!!zarse de.bide al de.sgaste............................ el casquillo sobre Ia-guarnici6n inferiorde la MOTOR v&lvula de desag(_e. 7. Vuelva a llenar eI motor con aceite a trav&s LUBRICACION del tube de la varilla indicadora do niveI para Use solamenteaceite de detergente de alta calidad relleno del aceite. Vacielo Ientamente. No Io clasificado con ta clasificaci6n SG-SL de servicio llene demasiado, Para la capacidad aproxiAPI. Seleccione ta calidad de viscosidad del aceite mada vea las "Especificaciones del Producto" SAE segOnsutemperatura de operaciSnesperada. secci6n de este manual. 8, Use un medidor en la tapa/variIla indicadora det nivet para relleno del aceite para revisar el nivel, Inserte la vadtla indicadorade nivel en el tube, y haga descansar ia tapa deI dep6sito para relleno deI aceite en el tube ai teer las medidas. No enrosque et tap6n cuando este tomando una lectura. Mantenga el nivel del °'_<'_"_ aceite en Ia marca de lleno (FULL) en lavarilla indicadorade niveI, Apriete la tapa en eI tube en forma segura cuando termine, 4. 58 FILTRO DE ACEITE DEL MOTOR Cambie el filtrode aceite det motor carla temporada ovez por medio que cambie el aceite, si el tractor se usa m&s de 100 horas en un afio. LIMPIEZA DE LA REJILLA DE AIRE La rejilla de aire debe mantenerse sin mugre y paja para evitar el dafio al motor debido al sobreCalentamiento. Limpie[a con un cepillo de alambre o con aire comprimido para remover Ia mugre y las fibras de goma secas, pegadas, FILTRO DE AIRE Su motor no va a funcionar en forma adecuada si usa un filtro sucio. Inspeccione el cartuchode papel cada dos meses o despu@sde 25 horas de operaci6n, el cu_l suceda primero. D@leservicioal fittro de aire m&s a menudo si se usa en condiciones polvorosas. Reemplace el cartucho de pape! cada afio, o despu_s de cada t 00 horas de operaci6n. PARA DAR SERV!CIO AL CARTUCHO • Cambie un cartucho que est6 sucio, doblado o dafiado. Maneje el cartucho nuevo cuidadosamente; no 1outilice si el sello de goma esta dafiado LIMPIEZA DE LA ENTRADA DE AIRE/AREAS DE ENFRIAMENTO Para asegurar un enfriamiento adecuado, asegfirese que la rejil[a del c6sped, las aletas de enfriamiento, y otras superficies externas del motor se mantengan limpias en todo memento. Cada 100 horas de operaci6n (m&s a menudo bajo condiciones extremadamente polvorosas o sucias), remueva la caja del ventilador y otras tapas de enfriamiento. Umpie las aletas de enfriamiento y las superficies externas, segSn sea necesario, Aseg_rese que se vuelvan a instalar las tapas de enfriamiento. AVISO: No lave el cartucho de papel o use aire a presi6n, pues esto dafiar& el cartucho. 1. Abra Ia puerta (A) en la caja deI ventilador para obtener acceso af elemento de _tro de aire (B), AVISO: Si se opera la m&quina con una rejilla del c6sped bloqueada, sucia, o con las aletas de en#iamiento taponadas, y/o Ias tapas de enfria* miento removidas se producir&daSo en el motor debido al calentamiento excesivo, SILENCIADOR Inspeccioney cambie el silenciadorcorroidoy el amo_guador de chispas (si viene equipado) puss pueden crear un peligro de incendio y/o daSos. BUJIA(S) Cambie las bujla(s) at comienzo ee cada temporada de siega o despu_s de cada t00 horas de operaciSn, Io que suceda primero. El tipo de bujia y e] ajuste de la abertura aparecen en "ESPECIFICACIONES DEL PRODUCTO secci6n de este manual. 2. Libere el cierre {C) y remueva el elemento. FILTRO DE COMBUSTIBLE EN LINEA El filtro de combustible debe cambiarse una vez cada temporada, Si el filtro de combustible se tapona, obstruyendo el _tujodel combuStible hacia et carburador, es necesario cambiarlo. 1, Con el motor fr[o, remueva el filtro y tapone Ias secciones de Ia linea de combustible, 2. Ponga el filtro de combustible nuevo en su posici6n en ta linea de combustible con la flecha seSalando hacia el carburador, 3. Asegt3rese de que no hayan fugas en la .................. lineadeI _ombustib!e y qu#.!as gi'apas est_n ................... colocadas en forma adecuada, 4, Inmediatamente limpie toda la gasolina derramada. Abrazadem __-,_ 3. Golpee ligeramente el elemento de papetpara desalojar la suciedad, 4. Limpie todos las partes det filtro de aire de cualquier suciedad o material acumulada. 5. Evite que cualquier suciedad entre en la abertura del carburador, Instale el elemento limpiado o nuevo en la base y aseg8relo con el cierre. 6. Cierre con el picaporte la puerta. combustible 59 Abrazadera LIMPIEZA • 4. Limpie todo material extrafio deI motor, Ia baterla, el asiento, el pulido, etc. • Limpie los desechos de la placa gu{a. Los desechos pueden limitar el movimiento de[ eje deI pedal del freno/embrague, lo que har& que patine Ia correa y que se pierda la tracci6n. _I.PRECAUCI6N: Evite todos los puntos de enganche y las piezas m6viles. Eche hacia atr_,sla abrazadera de cierre deI adaptador de la boquilla y empuje _ste en e! puerto de Iavado de la cubierta en el extreme izquierdo de ta cubierta de la segadora. Suelte la abrazadera de cierre para fijar el adaptador en la boquilla, Pue_o de Lavado Adaptador Pedal Del Placa De IMPORTANTE: -13rede Ia manguera para asegurarse de que Ia conexibn est& bien fija, \ _ n 5. 6. PRECAUCION: PUNTOS DE ENGANCHE SISTEMA DE D|RECC|ON, SALPICADERO, GUARDABARROS Y SEGADORA NO MOSTRADO$ * o Mantenga Ias superficies pu]idas y Ias ruedas sin derrames de gasolina, aceite, etc. Proteja las superficies pintadas con cera tipo automotdz, No recomendamos que se utilice una manguera de jardin o agua a presi6n para limpiar el tractor a no ser que el motor y la transmisi6n est_n cubiertos para protegerlos del agua, El agua en el motor y la transmisi6n acortan ra vida fltil del tractor, Utifizar aire comprimido o un soplador de hojas para remover hierba, hojas y basura del tractor y cortac@spedes. PUERTO DE LAVADO DE LA CUBIERTA La cubierta de su tractor est& equipada con un puerto de lavado sobre la superficie que forma parte del sistema de lavado de Ia cubierta. Se deberia utitizarcada vez quese hayausadoe! tractor. Abra la Ilave del agua, Desde la posici6n del operador del tractor, vuelva a arrancar el motor y ponga Ia palanca de aceleraci6n en Ia posici6nr&pido (",_"). IMPORTANTE: Vuelva a comprobar la zona para asegurarse de que est& despejada, 7, Mueva el controI del embrague del accesorio a la posici6n"ENGANCHAR", Mant6ngase en la posici6n del operador con la cubierta de corte acoptada hasta que la cubierta est@limpia. 8, Mueva el control del embrague del accesorio a Ia posici6n "DES ENGANCHADO", Gire la IIave de encendido a ?aposici6n STOP para apagar eI motor det tractor. Cierre la llave del agua, 9, Tire hacia atr&s Ia abrazadera de cierre del adaptador de la bequilla para desconectar el adaptador deI puerto de lavado de Ia cubierta. 10. Lleve el tractor a una zona seca, preferentemente de cemento o pavimentada. Mueva el control de] embrague del accesorio a la posici6n "ENGANCHAR" para quitar el exceso de agua y ayudar a que se seque antes de guardar ei tractor. 'L'eve eitiactoia uniu aihori onta'y .......... AAoVEnTE ,ciA: Sie'.oceso;io do" V0dO ..... despejado de su c_sped. Io bastante cerca de una boca de riego come para que tlegue la manguera del jard_n, IMPORTANTE: Aseg6rese de que ta boca de descarga deI tractor est& orientada LEJOS de su casa, garaje, coches aparcados, eto, Quite la boca de ensacado o cubierta de mantillo si est'. acoplada, 2, Mueva el control del embrague deI accesorio a la posicibn"DESENGANCHADO", ponga el freno de estacionamiento y apague el motor. 3. Enrosque el adaptador de la boquilla (empaquetado con el manual del operador del tractor) en el extreme de la manguera del jardin. esta rote o no est&, Ud. y otras personas estardn expuestos a que lahoja les lance aquellos objetos con los que entre en contacto, • Sustituya inmediatamente el aceesorio de lavado rote o que falta antes de vo?ver a usar la segadora, • Tapetodos los orificios de la segadoza con pernos y tuercas de seguridad. 6O ,_ t. 2. 3. 4. 5. 6. ADVERTENCtA:PARA I=VITAR LESI6NES SERIAS, ANTES DE DAR CUALQUIER SERVICIO O DE HACER AJUSTES: Presione el pedal del embrague/freno completamente y aplique el freno de estacionamiento, Ponga la palanca de control de movimiento en Ia posici6n de neutro. Ponga el embrague del accesorio en la posici6n desenganchado (DISENGAGED), Ponga Ia Ilave de ignici6nen la posici6n de apagado (STOP) y remu6vala. Aseg_rese que las cuchillas y que todas Ias partes movibles se hayan detenido completamente, Desconecte el alambre de Ia bujfa y p6ngalo en donde no pueda entrar en contacto con @sta. PARA DESMONTAR LA CORTADORA DE CESPED 1. Suelte el embrague poni@ndoloen la posici6n "DISENGAGED" ("DESACTfVADO"). 2. Baje la palanca elevadora de montaje ala posicionde rn&s abajo, 3, Retire la barra de tensi6n de la correa (K) de la barra de sujeci6n (L). _IL PRECAUCION: La barra de tensi6n de la correa funciona a resorte. Suj_tela con fuerza y su@Iteladespacio, 4. Retire Ia cerrea de la cortadora de Ia polea deI embrague el_ctrico (M). 5. Desconecte ta pieza de uni6n anterior (E) de la cortadora - retire el resorte de contenci6n y Ia arandeta, 6. Per uno de los lades de ta cortadora, desconecte el braze de suspensi6n de la cortadora (A) del chasis y la pieza de uni6n posterior (C) de Ia barra posterior de Ia cortadora (D) - retire los resortes de contenci6n y las arandeles, 7. Per el otto Iado de la cortadora, desconecte el braze de suspensi6n y la pieza de uni6n posterior. 61 PRECAUCION: Una vez que se desconecten fas piezas de uni6n posteriores, la palanca elevadora funcionar& a resorte, Sujete con fuerza la palanca elevadora al cambiarla de posici6n. 8. Per el lade derecho de la cortadora, desconecte la barra anti-balanceo iS) de la barra posterior derecha de la cortadora (D) - retire el resorte de contenci6n y la arandela, y jale la cortadora hacia usted hasta que la barra se salga del orificio de la barra. 9. Haga girar et volante del tractor todo le posible ala izquierda. 10,Deslice la cortadora per debajo del lade derecho del tractor. PARA INSTALAR LA SEGADORA Reatice el procedimiento descrito en "PARA INSTALAR LA SEGADORA Y LA CORREA DE TRANSMISION" del capitulo de Armado de este manual PARA NIVELAR LA SEGADORA Aseg_rese de que los neumdt_cosest@ninfladosa la PSI quese indica en estos. Si est_.ndemasiado infladoso poco inflados, el c_sped no le quedard bien cortado, Io cual podr_.Ilevarto a pensar que ta SEGADORA no est,. bien regulada. REGULACI6N VISUAL DE LADO A LADO 1. Si todos los neum&ticos est_n correctamente inftados y el c6sped parece haber quedado cortado desparejo, determine qu_ lado de la cortadora est& cortando m&s al ras. NOTA: SegSn Io desee0 puede subir el lado m&s bajo o bajar el lado m&s alto de la segadora, 2. Aborde elladode lacortadoraque quieraregular. 3. Con una Ilave inglesa de 3/4" o de calibre regulable, haga girar hacia la izquierda la tuerca de ajuste de la pieza de uni6n (A) pare bajar la cortadora, o bien h&gata girar hacia la derecha pare subida. NOTA: Cada vuelta complete de la tuerca de ajuste har& variar laaltura de la cortadora aproximadamente 3/16". tuema hacia la derecha pare subir segadora la tuerca izquierda hacia En caso que sea necesado realizer un ajuste, lea los pesos 2 y 3 de Ias instrucciones de Regulaci6n visual que aparecen m&s arriba. 5. Vuelva a verificar Ias medidas y ajuste nuevamente, en caso necesario, haste que ambos Iados queden iguales. AJUSTE DE DELANTE A ATR_,S IMPORTANTE: El piso debe querier bien nivelado de Iado a lado, Para que el c_sped Ie quede perfectamente cortado, las cuchitlas de ]a cortadora deben ajustarse de tal manera que Ia punta anterior quede 1/8" a 1/2" m&s abajo que la punta posteriorcuando la cortadora se encuentre en su posici6nm&s alta, _IbOUIDADO: Las cuchillas son afi[adas. Prot_jase Ias manos con guantes o envuelva Ias cuchillas con tela gruesa, o bien haga ambas cosas, • Suba la SEGADORA ala posici6n mas alta. • Ubique cualquiera de las hojas de la cuchilla de taI manera que Ia punta quede apuntando directamente hacia adelante. Mida ladistancia (B) que hay entre la punta anterior y el suelo y entre Ia punta posteriory el suelo. • Si Ia punta anterior de la hoja de la cuchil[a no est& 1/8" a 1/2" m&s abajo que la punta posterior, didjase ala parte de adelante del tractor. • Con una Ilave inglesa de 11/_6" o de calibre regulable, aftoje Ia tuerca A, d&ndole varias vueltas pare despejar la tuerca de ajuste B. • Con una Ilave inglesa de 3/4" o de calibre regulable, baga girar la tuerca de ajuste de la pieza de uni6n anterior (B) en sentido horario (ajustar) para elevar la parte de adelante de la cortadora, o bienen sentido antihorario (eflojar) pare bajada. la pare 4. Pruebe Ia regulaci6n realizada cortando c_sped que aLin no haya cortado y observando c6mo queda. Vuelva a ajustar, en caso necesario, haste obtener resultados satisfactorios. REGULACI6N DE LA PRECISt6N DE LADO A LADO t. Con todos los neum&ticos correctamente inflados, estacione el tractor a niveI de1suelo o en }a entrada a la casa. Prot@jase Ias manos con guantes o envuelva las cuchilIas con tela gruesa, o bien haga ambas cosas. 2. Suba la SEGADORA a la posici6n m&s alta. 3_ 4. Ajuste _a de regulaci6n de aitura B pare Ievantar ta segadora la tuerca de regulaci6n de aitura B para adore Ia tuerca A pdmero NOTA: Cada vuelta complete de la tuerca de ajuste hat& variar Ia altura de la cortadora ti8". • Vuelva a verificar las medidas y ajuste nuevamente, en caso necesario, haste que ta punta anterior de ta hoja de ta cuchilla quede 1/8" a 1/2" m_,s abajo que fa punta posterior, • Mantenga en Ia posici6nla tuerca de ajuste pot medio de una Ilave inglesa, y apriete bien la tuerca contra dicha tuerca de ajuste. A ambos lados de la cortadora, ubique Ia cuchilla hacia un lado y mida la distancia (A) que hay entre el borde inferior de la cuchilla y el suelo. Dicha distancia debe ser la misma a ambos lados. 62 PARA REEMPLAZAR LA CORREA DE LA CUCHILLA DE LA SEGADORA DESMONTAJE DE LA CORREA DE LA SEGADORA 1. Estacione el tractor en una superficie nivelada. Ponga el freno de mane. 2. Baje la palanca elevadora a la posici6n de rn&s abajo. 3. Retire la barra de tensi6n de la correa (K) de la barra de sujeci6n (L). CUIDADO: La barra de tensi6n funciona a resorte. Suj@telacon fuerza y su_ltela despacio. 4. Quite los tornillos (P) de las cubiertas derecha e izquierda y ret_relas (Q). 5. Quite toda suciedad y restos de hierbas que pueda haberse acumulado alrededor de los dispositivos de recolecci6n y de toda la superficie superior. 6. Retire Ia correa de la poleadelembrague el_ctrice (M), Iasdos poleas de los dispositivos de recolecci6n (R) y Ias poleas de los piSones (S). NOTE: Observe toda la correa de impulsi6n de movirniento y la posici6n de todas las guias y guardacorreas. 2. Desconecte el arn@sdelcable deIernbrague (A). 3. Quite Ia pieza de uni6n anti-rotaci6n (B) que est,_ del Iado derecho del tractor. 4. Retire Ia correa del pi56n estacionario (C) y del pifi6n del embrague (D). 5. Retire Ia correa deI pii56n central (E). 6. Jale el cable de la correa hacia Ia parte de atr&s del tractor. Con touche cuidado, retire la correa ja[ando hacia ardba desde la polea de entrada de la transmisi6n y per encirna de las paletas del ventilador (F). 7. Retire ]a correa jalando hacia abaje desde la polea del motor y alrededor de! embrague eI6ctrico (G). 8. Deslice Ia correa hacia la parte de atr&s del tractor, retlrela de Ia placa de direcci6n (H) y s&quela deI tractor. MONTAJE DE LA CORREA 1. Instale Ia correa nueva pas&ndota de Ia parte de atr&s a la parte de adelante de] tractor. per encima de la placa de direcciSn (H) y del v&stago del pedal det ernbrague / freno (J). 2. Jale la correa hacia la parte de adelante deI tractor y pAsela alrededor deI embrague y per sobre la polea del motor (G). 3. Jale la correa hacia ta parte de atr&s del tractor. Con rnucho cuidado, pase Ia correa de arriba a abajo alrededor del ventilador de tmnsrnisi6n y per sobre ]a polea de entrada (F). Asegt3rese de que Ia correa est_ dentro del guardacorrea. 4. Monte la correa en el pi56n central (E). 5. P_tsela a trav6s deI pifion estacionario (C) y del pifiSn det embrague (D). 6. Vue]va a instalar la pieza de uni6n anti-rotaciSn (B) del lade derecho del tractor. Aj_stela bien. 7. Vuelva a conectar el arn6s del embrague {A). 8. Aseg_rese de que ta correa calce en tedas Ias ranuras de Ias poleas y dentro de todas las guias y guardacorreas. 9. Monte la SEGADORA (Ver "PARA MONTAR LA SEGADORA_'en este capitulo del manual). MONTAJE DE LA CORREA DE LA SEGADORA 1. Instale la correa pas_.ndola atrededor de las poleas (R) y alrededor de las poleas (S), corno se rnuestra en la figura. 2. Pase la correa per encima de la polea del embrague el_ctrico (M). IMPORTANTE: Vefifique que la correa calce bien en todas tas ranuras de las poleas de la Vue]va a cotocar las cubiertas derecha e izquierda (Q); Ajuste bien redes Ios torniEIos, ................. _ ] 4. Coloque Ia barra de tensi6n de la correa (K) i' ,[_ cortadora. £,=en la barra de sujeci6n {L). \.,2r ]] 411t_OUlDADO: La barra de tensi6n funciona a /2_.,,J.J resorte. Suj_telaconfuerzayp6ngaladespacio. _ "/ _" 5. Suba la palanca elevadora a ta posici6n de _-._2 / m&s arriba. (_) PARA CAMBIAR LA CORREA DE IMPULSION "" DE MOVIMIENTO C23 3. Estacione el tractor en una superfiCie nivelada. Ponga el freno de mane. Si necesita asistencia, de[ lade de abajo del apoyapi@sizquierdohay una guia pr&ctica para el montaje de la correa DESMONTAJE DE LA CORREA 1. Desmonte la SEGADORA (Ver "PARA DESMONTAR LA SEGADORA en este cap[rule deI manual). 63 i I VERIFIQUE EL FRENO Si el tractor exige m&s de cinco (5) pies para pararse a una velocidad m_s alta en el cambio m&s alto en una superficie nivelada de hormig6n seco o pavimentada, entonces se debe controlar y ajustar el freno. CONTROL DEL FRENO 1. Aparcar el tractor en una supe_cie niveEada de hormigbn seco o pavimentada, presionar el pedal del freno hasta el fondo y accionar el freno de estacionamiento. 2. Desembragar la transmisibn colocando el mando de la rueda libreen Ia posici6n"transmisi6n desembragada". Tirar el mando de la rueda tibre fuera y dentro la ranura y soltar as{ se coloca en Ia posici6n desembragada. Las ruedas traseras tiene que bloquearse y patinar cuando se intenta empujar hacia adelante el tractor manualmente, Sustituir las zapatas del freno o contactar con Sears o con un otto centro de servicio cualiflcado, IMPRESION / INCLINACION DE LAS RUEDAS DELANTERAS La impresi6n e inclinaci6n de las ruedas delanteras de su nuevo tractor vienen as[ de f__brica y son normales. La impresi6n y la inclinaci6n de las ruedas delanteras no son regulables, En caso que se produzca a[gSn da_o que afecte Ia impresi6n o la inolinaci6n de [as ruedas de[anteras tal como vinieron de f&brica, p6ngase en contacto con un centrode serviciosSears u otro centro de serviciosautorizado. PARA REMOVER LAS RUEDAS 1. Bloquee el eje en forma segura. 2. Remueva lacubierta deI eje, el anilIo de retenci6n y las arandelas para permitirla remoci6n de Ias ruedas (la rueda trasera contiene una Ilave cuadrada - no la pierda). 8. Repare Ia Ilanta y vu@Ivalaa montar, AVISO: En ]as ruedas traseras solamente: alinee fas ranuras en el cubo de la rueda trasera en el eje. Inserte la llave cuadrada. 4. Vuelva a colocar las arandelas e inserte el anilIo de retenci6n en forma segura en la ranura del eje. _5._uetva a.coloca_ Iacubierta_d_teje ............. AVISO: Para arreglar las ilantas perforadas y p@ra prevenir que tenga Uantas pinchadas a causa de pequer'ias fugas, comprar de su commerciante Sears y utilizar et sello para Ilantas. Elsello previene que las Ilantas se sequen y tambi@n la corrosi6n. Arandelas Anillo de Retencibn Cublerta \ dell" 64 PARA HACER ARRANCAR EL MOTOR CON UNA BATERiA BAJA AOAADVERTENCIA: Las baterias de &cido-plomo generan gases explosivos. Mantenga las chispas, las llamas y los materiales para fumar atejados de Ias bater_as. Siempre use una protecci6n para los ojos alrededor de Ias baterias. Si su bateria est& demasiado baia como para hacer arrancar el motor tiene que voiverse a cargar. (Vea "Bateria" en la secci6n de Mantenimiento de este manual). Si se usan "cables de empalme" para un arranque de emergencia, siga este procedimiento: IMPORTANTE: Su tractor esta equipado con un sistema de 12 volts. El otro vehiculo tambi@ntiene que tener un sistema de 12 volts. No use la bateria de su tractor para hacer arrancar a otrosvehiculos. PARA ADJUNTAR LOS CABLES DE EMPALME1. Conecte cadaextremo del cable ROJO con el terminal (A-B) POSITIVO (+) de cada bateria, preocup&ndose de no hacer cortocircuito en el chasis. 2. Conecte un extremo deI cable NEGRO con el terminal (C) NEGATIVO (-) de una bateria completamente cargada. 3. Conecte el otro ex_remodel cable (D) NEGRO con un buena CONEXION A TIERRA DEL CHASIS, alejado del estanque de combustible y de la bateria, PARA REMOVER LOS CABLES, INVIERTA EL ORDEN 1. El cable NEGRO prirnero del chasis y luego de _abateria completamente cargada, 2. Et cable ROJO aI _Itimo de ambas baterlas, Batefia DSbiI o Bateria Oescargada Completamente Cargada REEMPLAZAR LA BATERIA _LADVERTENCIA: No haga cortocircu_o con los terminales de la bateria at permitir que una Ilave de tuerca o cualquierotroobjeto entre en contacto con ambos terminales a la misma vez, Antes de instalar Ia bateria remueva las pulserasde metal, los relojes de pulsera de metal, los anilIos, etc, El terminal positivotiene que conectarse primero para evitar las chispas debido a Ia conexibn a tierra por accidente, t. 2. 3, 4. 5. 6. 7. 8. PAPA REMOVER ELCONJUNTO DEL CAPOTA Y DEL ENREJADO 1. Levante el capota, 2. Desabroche el conector deI alambre de Ias luces delanteras. 3. P#,rese delante del tractor. Agarre el capota en los lados, inclfnelo un poco hacia el motor y s&quelo del tractor. 4. Para volver a instalar el capota, aseg_rese de volver a conectar el conector del alambre de las luces. Levantamos la capotaa la posici6nlevantada, Remueve la protecci6nde los terminales, Desconecte el cable de la baterla NEGRO primero y luego el cable de la baterfa ROJO y remueva la bataria del tractor, Instale ta nueva bateria con los t6rrninosen misma posici6ncomo la bateria vieja, Reemplazamos cubierta terminal Primero,conecte el cable de la bateria ROJO con el terminal positivo (+) con el perno hexagonal y la tuerca segSn se muestr& Apri6talos en forma segura, Conecte el cable de conexi6n a tierra NEGRO al terminal negativo (-) con el perno hexagonal y la tuerca que queden. Apri6tetos en forma segura. Cerramos Ia capota. __te oap°ta Conectordel alambrede las Lutes ra8 TRANSMISION __ Cubierta _ _L_ Terminal Gable / (positivo) REMOCtON/REEMPLAZO DE LA TRANSMISION Si per acaso su transmisi6n debe set removida para servicio o reempfazo, debe ser purgada despu6s de la reinstalaci6n y antes de operar el tractor. Vea"PURGAR LA TRANSMISION" en ta seccibn de ia Operacibn de este manual. CableNegro _-f_4.___._ \. MOTOR _t _ PARA AJUSTAR EL CABLE DE CONTROL DE LA ACELERACION \___!xS/ PARA CAMBIAR LA BOMBILLA DELANTERA 1, Levante et capota, DE LA El control de Ia aceleraci6n ha sido preajustado en Ia f&brica y no deberia necesitar ajustes. Revise los ajustes que se describen a continuaciSn, antes de soltar el cable. Si el ajuste es necesario, vea de manual de motor. LUZ ............... 2.-_Tire el sujetador, de la bombillafuera del ........ PARA AJUSTAREL CONTROL DE ................................. ESTRANGULACION agujero en Ia parte trasera del enrejado. 3. Cambie la bombilla en el sujetador y empuje El control de la estrangulaci6n ha sido preajustael sujetador de Ia bombilla, en forma segura, do en la f&brica y no deberia necesitar ajustes. hacia atr&s en el agujero en la parte trasera PARA AJUSTAR EL CARBURADOR del enrejado. 4. Cierre el capota. El carburador ha sido preajustado en la f&brica ENTREClERRE Y RELI_S y no deberia necesitar ajustes. Sin embargo, se El alambrado suelto o daSado puede producir el pueden necesitar ajustes de menor importancia maI funcionamiento de su tractor, o que deje de para compensar pot las diferencias en el combusfuncionar, o Ie impida el arrancar. tible, temperatura, altura o carga. Si el carburador • Revise el alambrado. necesita ajustes, yea de manual de motor. PARA CAMBIAR EL FUSIBLE C&mbielo pot un fusible tipo enchufable de 30 amps, ripe automotdz. El sujetador del fusible est& ubicado detrAs del tablero. 65 Inmediatamente prepare su tractor para el aimacenamiento al final de Ia temporada o si el tractor no se va a usar por 30 d{as o m_s. _Ip_DVERTENCIA: Nunca almacene el tractor con gasolina en el estanque dentro de un edificio en donde los gases pueden alcanzar una llama expuesta o una chispa. Permita que el motor se enfr{e antes de almacenado en cualquier recinto privado. MOTOR SISTEMA DE COMBUSTIBLE TRACTOR Cuando e] tractor se va a almacenar por cierto periodo de tiempo, limpie[a cuidadosamente, quite toda la mugre, la grasa, las hojas, etc. Gu&rdela en una _rea limpia y seca. 1. Limpie todo el tractor (vea "LIMPIEZ__' en la secci6n de Mantenimiento en este manual). 2. Inspeccione y cambie Ias correas, si es necesario (vea lae instruccionespara el cambio de las correas en la secci6n de Servicio y Ajustes de este manual). 3. Lubr{quelo, seg(m se rnuestra en la secci6n de Mantenimiento de este manual. 4. Aseg_rese quetodas lastuercas, los pernos y los tornitlos est_n sujetados en forma segura. Inspeccione las partes movibles para verificar si hay dafio, rotura o desgaste. C&mbielas si es necesado. 5. Retoque todas superficies pintadas oxidadas o picadas; aplique Iija antes de pintar. BATERiA • Cargue la baterla compietamente antes de guardarla. • Despu_s de cierto per{odo de tiempo en almacenamiento, ta bateria puede necesitar volver a cargarse. • Para ayudar a evitar [a corrosi6n y las fugas de potencia durante largos periodos de almacenamiento, se deben desconectar los cables de Ia bateria y se debe Iimpiar cuidadosamente (vea "PARA LIMPIAR LA BATERIA Y LOS TERMINALES" en la secci6n de Mantenimien- IMPORTANTE: Es important evitar que se for_ man depositos de goma en partes fundamentales del sistema de combus-tible tales como e{ carburador, el filtro del combustible, la manguera del combustibles mezclados con alcohol (conocido como gasohol o que tienen etanol o metanol) pueden atraer humedad, Io que conduce a Easeparaci6n y a la formaci6n de acudos durante elalmacenam]ento. La gasolina acidica puede daSar el sistema de combustible de un motor durante el periodo de almacenamiento. • Vaciar el dep6sito del carburante poniendo en marchaeI motor y dej_ndolo funcionar hasta que el carburante termine el carburador est6 vado. • Nunca use los productos para limpiezadel carburador o deI motor en et estanque de combustible puss se pueden producir dafios permanentes. • Use combustible nuevo la pr6ximatemporada. AVISO: El estabilizador de combustible es una alternativa aceptable para reducir a un minimo la formaci6n de dep6sitos de goma en el combustible durante el periodo de almacenamiento. Agregue estabitizador a la gasotina en el estanque de combustible o en el envase para el almacsnamiento. Siempre siga la proporci6n de mezcla que se encuentra en el envase delestabilizador. Haga funcionar e! motor por lo menos 10 minutos despu_s de agregar el estabilizador, para permitir que @steIlegue al carburador. No vaciar la gasol{na del estanque de gasolina y et carburador si se est& usando estabilizador de combustible. ACEITE DEL MOTOR Drene el aceite (con el motor catiente) y c&mbielo con aceite de motor limpio. (Vea "MOTOR" en la secci6n de Mantenimiento" de este manual.) ClUNDRO(S) 1. Remueva la(s) buj_a(s). 2. Vacie una onza de aceite a trav@s deI agujero(s) de la bujia en el cilindro(s), 3. Gire la Ilave de ignici6n a la posici6n de '_,rranque" (Start), por unos cuantos segundos _oae est ma a_. • Despu@s de limpiarla, deje los cables desconectados y pdngalos en donde no puedan entrar en contacto con los terminales de la bateria. • Si se remueve la baterla de[ tractor para el almacenamiento, no la guards directamente sobre concreto o sobre supe_cies hhmedas. 4. Cambie'por buj{a(s) nueva(s) OTROS • No guarde Iagasolina de unatemporada alaotra. • Cambie el envase de la gasolina sise empieza a oxidar. La oxidaci6n y/o la mugre en su gasolina producir_n problemas. • Si es posibJe, guards su unidad en un recinto cerrado y c_braia para protegerla contra el polvo y la mugre. • Cubra su unidad con un forro protector adecuado que no retenga la humedad. No use pl&stico. El pl_.stico no puede respirar, Io que permits la formaci6n de condensaci6n, Io que producir& la oxidaci6n de su unidad. IMPORTANTE: Nunca cubra el tractor mientras el motor y las areasde escape todavia estan calientes. 66 IDENTIFICACION DE PROBLEMAS: Vea la secci6n apropiada en el manual a menos que est6 dkigido a un centro de servicio Sears, PROBLEMA No arranca CAUSA 1. 2. 3. Sin combustible. Motor sin Ie "ESTRANGULAG](_N" (CHOKE) adecuada. Motor ahogado. 4. Buiia 5+ Filtro 6. Filtro 7. Ague 3. Liens elestanque de'combustible. Vea "PARA HAQER ARRANCAR EL MOTaR" en [a secciSn de operaci6n, Espere varios minutos antes detratar de arrancar. 4. 5. 6. Cambis la bujia. Limpie/cambie el filtro de aire. Cambie el filtro de combustible, 7, Vaciar el estanque de combustible y el carburador, vuelva a Itenar el estanque con gasoline nueva carobis el fi[tro de combustible, 8. Alambrado suelto o daP,ado. 8. Revise todo el alambrado, 9. Carburador desajustado. 9, Vea "PARAAJUSTAR EL CARBURADOR" en la secci6n de Ser¢icio y Ajustes. 10. Dificil de arrancar mala. de airs sucio. de combustible sucio, an el corobustible. 1. 2. 10, V_.lvulas del motor desajustadas, Pongase en contacto con un centro de servieio cualif{cado "SEARS". 1. Filtro de airs sucio. t. 2. BujSamala. 2. Gamble la buj_a. 3, 4. Baterla baja 0 descargada, Filtro de combustible sucio. 3. Vuslva a cargar 0 cambie ia bateria. Oambie e! filtro de combustible, 5. Combustible rancio o sucio, 5. 8. A]ambrado sue]to o daSado. 6. Revise todo el alambrado. 7, Carburador dssajustado. 7. Vea"PARAAJUSTAR ELCARBURADOR" en ia secci6n de Servicio y Ajustes. 8, V&lvulas del motor desajustadas. 8. Pongase en contacto con un centro ds servicio cualificado "SEARS", Presione el pedal de{freno. 4, Limpieicambie el filtro de aim. Vaciar elestanque de combustible y vuelva a flenarlo can gasoline nueva. , ,,,,,,, ,,, .... El motor no la vuelta ELmotor suena pero no arranca P_rdlda de fuer-za Pedal deI freno no presionado, I, 2. Elembraguedelaccesofioest&enganchado. 2. Desenganche elembraguedelaccesorio. 3. Bater{a baja o descargada. 4. ,5. Fusible quemado, Terrninales de la bateria corroidos. 3. •I, Vuslva a cargaJ"o cambie la bateria. Carobie el fusible. 5, Limpie los terminates de ta bater{a. 6. Alambrado suelto o daSado, 6. Revise todo el alambrado. 7. Interruptor de la igniciSn fallado. 8. Solenoids 0 arrancador fallados. 7. s. Revise/cambieelinterruptordelaignici6n. Revise/cambie el solenoids o arrancador, 9. Interruptor(es) que exige(n) la preseneia deI operador fallado. 9. Pongase en contacto con un centro de servicio cualificado "SEARS", ..... "[L 3, Bater_a l_aja o olescargada ............................ _ vue[va a cargar o cambie la baterie Terminales de la bateria corroidos, 2. Limpie los terminales de labateria. Alambrado sue_o o dafiado. 3_ Revise todo el atambrado. 4, Solenoide o armncador falladoe. 2. 4. 1_ Carte rnucho c_sped, muy r_,pido. 2. Aeeleraci6n en la posici6n de "ESTRANGULACION" (CHOKE). 3. Acumulaci6n de c_sped, hojas y basura : debajo de ]asegadora, 4. Filtro de aim sucio, Revise/cambie,,e!solenoide o arrancador, "_. Eleve laa{turade corteireduzcalaveEocid&d 2. A}uste el control de Ia aceletaci6n. 3. Limpie la porte inferior de la cajade la ssgadora. 6, Nivel de aceite bajo/aceite sucto. Bujla fallada. 4. 5. 6. z. 8. Filtro de combustible sucio. Combustible rancio o sucio, 7, 8. Limp{e/cambie el filtro de aire. Revise el n_velde aceiteicambie e[aceite. Limpie y vuelva a ajustar la abertura o cambie fa buj{a, Cambie el fiitro de combustible, Vaciar elestanque de combustib}e y vuelva a Itenarlo con gasolina nueva. 5, 67 IDENTIFICACION DE PROBLEMAS: Vea la secci6n apropiada en el manual a menos que est_ dirigido a un centre de servicio Sears. CAUSA PROBLEMA P_rdida de fuerza (sigue) g. CORRECC|ON Ague en e'l"c()mbustible. 9. _0. 11. 12. 13. Alambrado de la bujfa suelto, Rejilla/aletas de sire del motor sucias. Silenciador sucioitaponado. Atambrado suelto 0 daflado. t0. 11. 12. _3. 14. Carburader desajustado. 14. 15. V&lvulas del motor desajustadas. Vlbracl6n excealva Vaciarelesfanquedscombustib]eyelcarburador, vuetva alIenarel sstanque con gasoline nueva y cambie elf_ttro de combustible. Conecte y apriete el alambre de Ia bujfa. Limpie ias rejillaialetas de airs deI motor. Limpie/cambie el silenciador. Revise todo el alambrado. Ve_"PARAAJUSTAR ELCARBURADOR" en la secci6n de Ssrvicio y Ajustes. 15_ Pongase en contacto con ue centre de servicio cualh3cado "SEARS". 1, Cuchilla desgastada, doblada o suelta. 1, 2. Mandril de la cuchilla doblado, Page(s) sue[ta(s)/dafiada(s). 2. 3. Sistemade controtqus sxige la presencia del opsrador-seguridadfatlado, 1. Revise el alambrado, los interruptores y la conexiones.Si no est&n correctas, Pongase en contacto con un centre de servicio cualificado "SEARS", 1, Cuchi{ladesgastada, doblada o suelta. i 2. El conjunto segador no est_.nive]ado, AcumulaciSn de c6sped, hojas y basura debajo de la segadora. Mandril de ta cuchifladoblado. Los agujeros de verltilaci6n del conjunto segador taponadosdebido ala acumulacl6n does-sped, hojas y basura ah'ededorde los mandriles. 2 3. Cambie la cuehilla. Apriete el perno de la cuchilla, Nivele el conjunto segador. Limpie la parts inferior de ]a cajade ta segadora. Cambie la mandril de la cuchilla. 3, Cambie la cuchilla. Apriete e] psmo de Ia cuchilIa. Cambie Ia mandrB de la cuchitla, Apriete Is(s) parte(s). Cambie las partes daSadas. ,,,,, ....... El motorcent|. ndafunclonando cuando e! op. eradorse bsja delaslentocon e[ embrague delaccesorio enganchado , ,,,u,,u El corte dlsparejo 3, 4, 5, 4: 5. Limpie alrededer de los mandriles pare abrir los de ventilaci6n. t. 2. Remueva la obstruccibn, Cambie la cortes de impu{si6n de Ia segadora. Cambie la poles de guia, Cambie ts mandril de la cuchilla. ,,,, ,,,,,,,, 4_ Obstruccibnen elmecanismo delembrague, La ¢orrea de impulsiSn de la segadora estd desgastada!dafiada. Polea de guia atascada. Mandril de la cuchilla afascado+ 1. 'Veloeidad del motor muy 'lenta'i......... 1. 2. 3. Veloeidad de recorrido demasi_',do r,_pida. Cdsped moiado. 2. 3, Permifa que se seque el c_spedantes de segar. 5, Presi6n de sire de Jan [tantas baja o disparsja. Ouehilia desgastada, doblada 0 suelta. 5. Acumulaci6n de c@sped,hojas y basura debaio de la segadora. La correa de impulsiSnde lasegadora est._, desgastada o desajusfada. Las cuchitlas est_n mal coninstaladas. 7, Revise lee llanfas pare verificarque tienen Ia presiSn de airs. Cambieiafile la cuchilIa. Apriete el pems de la cuchilla. L{mpie la parts inferior de Ia cajade la segadora. Cambieiajuste la correa de impulsi6n de ia segadora. Vuelva a instaJarlas cuchillsselbord_ afilado haciaabaje, Cambie per Ias cuchillas enumeradas en este manual. Las cuchillas segadoraa no rotaD 3. Male descarga del o_sped 6. 7, 8, 9. 3. 4. 6. 8, 9. 10, Cuohillas inadecuadas en use. _o, 11. Los aguieros de ventilaciSn del conjunto agujeros segador taponados debids ala aeumulaciSn de c6sped, ho as y basura alrededor de los mandri[es. 11, 68 Ponga el con'trpl de Ia aceleracibn en Ia posici6n de "RAPIDO" (fast), Cambie a una vslocidad m&s lenta. Limpie alrededor de los mandriles pare abrir los de ventilaci6n. IDENTIFICACION DE PROBLEMAS: Vea la secci6n apropiada en el manual a menos qua est_ dirigido a un centre de servicio Sears, CORRECC|(_N CAUSA PROBLEMA 1. El interrupter e_'_PAGADO"(OFF). 1. "ENCiEND_'(ON) 2. BombilIa(s) o I_mpara(s) quemada(s). 2. Cambie ia bombina(s)0 I&mpara(s). 3. Interruptor de la Iuz fallado. 3. Reviseicambie el inte=ruptor de la luz. 4. Alambrado suelto o daSado, 5, Fusib!e quemado. 4. 5, Revise el aJambradoy las cortex{ones. Cambie el fusible, La bateria no carga 1. 2. a. 4. E[emento(s) de la bater|a malo(s}, Males cone×iones de cables. Reguladorfallado (si equipado), Alternador ,fallado. , ,,, ,,, ,,, t. Cambie la bateria, 2, Revise/limpie todas las cables, s. i Gamble el regulador, 4. Gamble el alternador. P_rdida de impulsi6n I. El control de rueda libre est& enla posicibn "DESENGANCHADO" (disengaged), Residues es en de la piece de direcciSn (Si los tiene), La correa de impulsi6a de impulsi6n de movimiento. Aire atrapado en ]atransporte 0 eI servicio. Llave cuadrada de eje es ausente, 1, Las 1,7 (ces) de lantera(s) no funciona, ado 2. 3. 4. 5. 2_ 3. 4. 5. eIinterruptorl Ponga el control de rueda libra enla posiciSn "ENGANOHADO"(disengaged). Vea"LIMPIEZA" en lasecci6n de Mantenimento de este manual. Reemplace la eorrea de movimien-to esta gastada, daSada 0 rota. Purgue latransmisi6n. Vea "PARA REMOVER LAS RUEDAS" en la seeci6n de Se_vicio y Ajustes de este manual. ,,,,,,, El motor tien =_corlt_ex- plosiones" cuando se "APAGA" El tractor se ponen marcha atr_s El contmlde laaceleraci6ndel motornofue ajustado en la posici6n de velecidad media y m&xima (r&pida) antes de pare el motor, Mueva el control de la ace]emcibn a Ia posici6n de velocidad media y m_xima (r&pida) antes de pare el motor, El sistema de funcionamiento atr&s (ROS) no est& "ON". cuando enganche la sagadora o otto accesorio. Girar el ROSen la posici6n "ON".Vea Ia secci6n de operaci6n. 69 70 GUfA SUGERIDA PARA MEDIR LAS PENDIENTES CON LA VISTA PARA UNA OPERACI()N SEGURA | _IL y abajo de las pendlentes, nunce transversalmente con respecto e las DVERTENCIA: Pare evitar da_os 9raves, haga funcionar su tractor art!hal pend[entes. No cot!at pendientes meyores de 15 grades, Haga los t virajes graduelmente pare evitar volcarse o la p_rdida de control, I Tenga touche cuidado cuando eatable de dlrecci6n en las pendientes. 1, Plegar esta pdglna a 1o largo de la I(nea punteada arriba indicada, 2, Tenet la p_gina ante de sf mismos de mode que su horde izquierdo sea vertical paralelo al troneo del _irbol u otra estructura vertical, 3, Miter a traY,s del pllegue en dlrecei6n de la pendiente que se quiere medir, 4. Comparar et ,_nguio del p]legue con la pendiente det terreno. I NEED HORE HELP? i Youq[ find the answer _ and more on managemyhame.com ! - for free! i , Find this andall yourother product manuals online. ' Getanswers fromour teamofhomeexperts. " - Geta personalized maintenance planfor your home. , Find information andtools tohelpwithhomeprojects. manage I_ home bro_ht to ya_zl_y Se_ Your Home For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professiona[ installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME ® Anytime,day ornight (1-800"469-4663) www.sears.com (U.S-A. and Canada) www,sears,ca Our Home For repair of carry-in products like vacuums, lawn equipment, and electronics, call or go on-line for the nearest Sears Parts and Repair Center. 1-800-488-t222 Anytime, day or night (U.S.A. only) www,soars.com To purchase a protectionagreement(U.S.A.) ........ or maintenance agreement (Canada) onaproduct serviced by Sears: ........_ 1-800-827-6655 (u.s._) Para pedir servido de reparad6n a domidlio, y para ordenar piez.as: 1.888.SU.HOGAR ® 1-800-361-6665 (Canada) _ Au Canada pour serviceen francis: 1.800.LE.FOYER_C (1_0-533-6937) _ _ (1-888-7844_427) www.seam.ca _ © Sea_ Braags,LLC ® Rag_s|ared Trademark ® Mar-ca Registrada ! TM t TM Tr=demark) Mama s_ Sarvica de F'&bfica I su Marca Mark af Seats de Se_icio Brands, de Sears LLC Brands, LLC _:; Marque de cOmma_ceI t_o Marque d_pos_e de Seats Brands,'LLC 10.30.I2 BD Printed in the U.S.A.
This document in other languages
- español: Craftsman 917.28008