Download MV catalogue

Solenoid Valve
MV
Oil, Water series
Normal Close Type
<Characteristic>
○ This model needs no large space, since it has no body and a
straight line form.
○ Small-sized, light weight.
○ It is possible to customize materials for food application.
○ Our valves are customized coil spec for each voltage.
○ It is possible to customize for RoHS application.
<Application>
○ Burner, Boiler, Water equipment, Chemical (pH6~10) equipment
○ Food equipment (Customize materials)
MV5020W
<Specification>
Model
Item
Voltage Rating
Fluid
Power Consumption(VA)(TyP.)
Orifice diameter（mm）
MV201
φ1.0
Max. working Pressure (MPa)(TyP.)
MV202
MV5010
MV5020
MV5028
100－240VAC（50/60Hz）、12VDC、24VDC ※1
Kerosene, Other oil ※2
10
φ2.0
φ1.0
φ2.0
1.0
-20°C~+40°C （No Freezing）
R1/8 or G1/8
0.11 ※3
Lead wire assembly
φ2.8
0.3
Room Temperature (°C)
Connection
Weight (kg)
Option
※1: Our valve are customized for each voltage.
※2: Please let us know your usage fluid. ※3: There is a small difference for the specs.
Model
Item
Voltage Rating
Fluid
Power Consumption(VA)(TyP.)
Orifice diameter (mm)
MV201W
MV202W
MV5010W
MV5020W
MV5028W
100－240VAC（50/60Hz）、12VDC、24VDC ※1
Water, Drink water, Chemical solution(pH:6~10) ※2
10
φ1.0
φ2.0
φ1.0
φ2.0
Max. working Pressure (MPa)(TyP.)
1.0
Room Temperature (°C)
-20°C~+40°C (No Freezing)
Connection
R1/8 etc. ※3
Weight (kg)
0.11 ※4
Option
Lead wire assembly
※1: Our valve is customized for each voltage.
※2: Please let us know your usage fluid. ※3: Possible to choose from some types.
※4: There is a small difference for the specs.
φ2.8
0.3
Nippon Control Kogyo Co., Ltd. Sales Dept. 5-1-16 Chiyoda, Sakado, Saitama 350-0214 JAPAN.
Tel. +81-49-283-7711 – Fax. +81-49-283-7717 – www.nipcon.co.jp
[Ver.1.0]
<<< User’s Manual >>>
1. Input
Voltage:
Put a wire to a coil terminal, and put electric power.
2. Setting
Turning the outlet side of valve up, and installing it vertically for ground. (Refer to an above
picture.)
3. Vibration
This valve causes some vibration. To avoid any bad effect to device, to have an attention to the
strength of setting plate and the setting way, and to use a vibration-proofing rubber is effective.
4. Attention
to use
○ This model is not drip-proof equipment. Please avoid pouring water over. Particularly, please
pay attention to use at ON condition of voltage.
○ If there is any fault for example fluid leaking, stop using and have a contact to us.
○ Please do not disassemble our product.
5. Outline
drawing
※It is possible to choose from some types for water application.
４４
１９
（２ ３）
１５
１３
２９． ３
ＯＵＴ
１８ ７　Ｆ ａｓｔ ｏｎ　ｔａｂ
Ｒ１ ／８
Ｏ ＵＴ
１８
９
１２
１ １
１８．７
８
Ｒ１／８
１２
２６
MV201, 202
９
Ｒ １／８
ＩＮ
１４ ．９
１５
８
Ｒ１／８
６６
３３． １
６２
２８．３
φ３０
１２
ＩＮ
MV5010, 5020, 5028
Nippon Control Kogyo Co., Ltd. Sales Dept. 5-1-16 Chiyoda, Sakado, Saitama 350-0214 JAPAN.
Tel. +81-49-283-7711 – Fax. +81-49-283-7717 – www.nipcon.co.jp
[Ver.1.0]