Transcript
User Guide Thank you for buying our new exclusive VariVolt Storm Cartomizer. The cartridge is easy to fill , and this guide should help you get the best from this great atomizer. To fill you will need to remove the outer metal sleeve to reveal the cartridge. To make it easy to remove the outer metal sleeve, Attach the Storm Cartomizer to the VariVolt by screwing clockwise until finger tight. Holding the VariVolt Firmly in one hand with the other pull the cover sleeve in the direction of the arrows as shown. Fill the supplied syringe to approx. 1.5ml with your favourite eliquid. Pierce the small hole as shown by the arrow with the syringe needle. Fill the cartridge slowly until the liquid is just below the silicon seal. Priming the coil for the first time Add 2 drops of liquid into the central hole to prime the coil before first use. For first use we recommend is set to 3.8 to 4.2volts. Slide the cover sleeve and mouthpiece over the cartridge, your VariVolt Storm is now ready for use. Replacement cartridges are available as packs of 2 in the VariVolt section on the website.
