Transcript
Specifications ADA FAUCET DESCRIPTION • Metal construction with a chrome plated, LifeShine® polished brass or glacier finish • 1/2" CC connections • Includes showerhead, arm and flange OPERATION • Pull-on/push-off design • Lever style handle with optional interchangeable insert • Allows control of both temperature selection and volume with a single handle FLOW • Showerhead limited to 2.5 gpm (9.5 L/min) CARTRIDGE • 1225 cartridge design • Nonmetallic/nonferrous and stainless steel materials • Accommodates back to back installations STANDARDS • Third party certified by CSA to meet CSA B-125,ASME A112.18.1M and all applicable requirements referenced therein and complies with the applicable requirements of ANSI A117.1 WARRANTY • Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser • 5 year warranty if used in commercial installations MONTICELLO® Single-Handle Shower Trim Only Models: T2524, T2524CP, T2524P, T2524W (Packed 1 per carton) FINISHED WALL LINE H/A/F 7"(178mm) ESCUTCHEON DIAMETER 15/16" 4-1/2" (114mm) WALL OPENING HOT INLET DIAMETER WALL OPENING 3-1/2" (89mm) MAX. 2" (51mm) MIN. 1-7/16" (36mm) MIN. 2-3/16" (55mm) MAX. CL 15/16" 6' - 6" (1981mm) NOMINAL PLASTER GROUND COLD INLET 8" (203mm) MIN. 2-3/16" (55mm) MAX. PLASTIC TUB/SHOWER SURROUND 2-1/16" (52mm) REF. 45"-48" (1143-1219mm) FLOOR FLOOR THICK WALL APPLICATION THIN WALL APPLICATION CRITICAL DIMENSIONS (DO NOT SCALE) Rev. 6/05 FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com
