Download Dynamode SSD-KIT mounting kit

SSD-KIT
2.5” HDD or SSD conversion for 3.5” Drive Bays
Upgrade your Computer’s
Storage Potential.
Are you looking for the very latest 2.5” Hard Disk Drive (HDD) or
Solid State Drive (SSD) upgrade for your existing, 3.5” Drive Bay
Setup? Do you need the updated SATA and Power Cables to
realise the full potential of this new Storage Technology?
The SSD-KIT is a low cost and easy to install mounting and combined
Power solution, allowing either 2.5” Format HDD or SSD Drives to be
correctly and securely mounted into legacy Desktop, Workstation or
Server-based 3.5” Drive Bay slots. Featuring lightweight aluminium guide
rails with multiple slotted fixing points allows literally any legacy 3.5” Drive
Bay to be used for new technology, 2.5” Storage Devices.
Not forgetting your new data and power requirements of these latest
SATA 2.5” Drives, Dynamode also bundle a generous length SATA data
cable, together with the standard ‘molex’ type Power Connector to SATA
power connector – so now no need for expensive Power Supply or
messy, over length Power Cables.
Everything to get you connected!
2.5” Guide Rails, SATA Data Cable,
Molex Power Adapter and screw fixings
Featuring…
Lightweight aluminium 2.5” guide rails (1 pair)
Ideal for 2.5” HDD or SSD fitment into 3.5” Drive Bays *
Multi-slot design for secure and tailored fit into most systems
Bundled SATA Data Cable
Bundled ‘molex’ to SATA Power Cable
Screw fixings supplied as standard
Add enhanced Storage Potential and reduce costs
Ideal for all systems. Desktops, Workstations and Servers
* Existing HDD or SSD required
Also available: SSD-RAIL
ABS Plastic 2.5” HDD or SSD
cradle with fixings only
For the complete range visit www.DYNAMODE.com
© 2011 Dynamode
Details correct at going to press. E&OE
All Trademarks Acknowledged