Download SERVICE MANUAL - Diagramasde.com

CDX-GT20W/GT200/GT200E/
GT200S/GT250S
SERVICE MANUAL
US Model
Canadian Model
Ver. 1.2 2006. 03
CDX-GT20W/GT200
AEP Model
UK Model
CDX-GT200/GT200E/GT200S
E Model
Chinese Model
CDX-GT250S
• The tuner and CD sections have no adjustments.
Model Name Using Similar Mechanism
AUDIO POWER SPECIFICATIONS (US MODEL)
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
23.2 watts per channel minimum continuous average power into
4 ohms, 4 channels driven from 20 Hz to 20 kHz with no more
than 5% total harmonic distortion.
NEW
MG-611WA-186//C
CD Drive Mechanism Type
MG-611WA-186//Q
Optical Pick-up Name
KSS1000E
SPECIFICATIONS
CD Player section
Signal-to-noise ratio:
Frequency response:
Wow and flutter:
AM tuning interval (CDX-GT250S only):
9 kHz/10 kHz switchable
Antenna terminal:
External antenna connector
Intermediate frequency: 10.7 MHz/450 kHz
Sensitivity:
30 µV
120 dB
10 – 20,000 Hz
Below measurable limit
Tuner section
MW/LW (CDX-GT200 (AEP, UK)/GT200E/GT200S)
Tuning range:
MW: 531 – 1,602 kHz
LW: 153 – 279 kHz
Aerial terminal:
External aerial connector
Intermediate frequency: 10.7 MHz/450 kHz
Sensitivity:
MW: 30 µV, LW: 40 µV
FM
Tuning range:
CDX-GT20W/GT200 (US, Canadian):
87.5 – 107.9 MHz
CDX-GT200 (AEP, UK)/GT200E/GT200S:
87.5 – 108.0 MHz
CDX-GT250S:
87.5 – 108.0 MHz (at 50 kHz step)
87.5 – 107.9 MHz (at 200 kHz step)
FM tuning interval (CDX-GT250S only):
50 kHz/200 kHz switchable
Antenna terminal:
External antenna connector
Intermediate frequency: 10.7 MHz/450 kHz
Usable sensitivity:
9 dBf
Selectivity:
75 dB at 400 kHz
Signal-to-noise ratio:
67 dB (stereo), 69 dB (mono)
Harmonic distortion at 1 kHz:
0.5 % (stereo), 0.3 % (mono)
Separation:
35 dB at 1 kHz
Frequency response:
30 – 15,000 Hz
Power amplifier section
Outputs:
Speaker outputs (sure seal connectors)
Speaker impedance:
4 – 8 ohms
Maximum power output: CDX-GT20W/GT200 (US, Canadian)/GT250S:
52 W × 4 (at 4 ohms)
CDX-GT200 (AEP, UK)/GT200E/GT200S:
50 W × 4 (at 4 ohms)
– Continued on next page –
AM (CDX-GT20W/GT200 (US, Canadian)/GT250S)
Tuning range:
CDX-GT20W/GT200 (US, Canadian):
530 – 1,710 kHz
CDX-GT250S:
531 – 1,602 kHz (at 9 kHz step)
530 – 1,710 kHz (at 10 kHz step)
FM/AM COMPACT DISC PLAYER
CDX-GT20W/GT200: US,CND/GT250S
FM/MW/LW COMPACT DISC PLAYER
CDX-GT200: AEP,UK/GT200E/GT200S
9-879-862-03
Sony Corporation
2006C04-1
© 2006. 03
eVehicle Division
Published by Sony Techno Create Corporation
1
CDX-GT20W/GT200/GT200E/GT200S/GT250S
Ver. 1.2
General
Outputs:
Inputs:
Tone controls:
Power requirements:
Dimensions:
Mounting dimensions:
Mass:
Supplied accessories:
Audio outputs terminal (sub/rear switchable)
Power antenna relay control terminal
Power amplifier control terminal
Antenna input terminal
AUX input jack (stereo mini jack)
Low: ±10 dB at 60 Hz (XPLOD)
Mid: ±10 dB at 1 kHz (XPLOD)
High: ±10 dB at 10 kHz (XPLOD)
12 V DC car battery (negative ground)
Approx. 178 × 50 × 179 mm
(7 1/8 × 2 × 7 1/8 in) (w/h/d)
Approx. 182 × 53 × 161 mm
(7 1/4 × 2 1/8 × 6 3/8 in) (w/h/d)
Approx. 1.2 kg (2 lb 11 oz)
Parts for installation and connections (1 set)
Card remote commander: RM-X151 (CDX-GT20W: US/
GT200: US, CND/GT250S)
Design and specifications are subject to change
without notice.
Us and foreign patents licensed from Dolby
Laboratories.
SERVICE NOTES
CAUTION
NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK
OR BASE UNIT
The laser diode in the optical pick-up block may suffer electrostatic
breakdown because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic breakdown and also use
the procedure in the printed matter which is included in the repair
parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused on
the disc reflective surface by the objective lens in the optical pickup block. Therefore, when checking the laser diode emission, observe from more than 30 cm away from the objective lens.
Notes on Chip Component Replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be damaged by heat.
If the optical pick-up block is defective, please replace the whole
optical pick-up block.
Never turn the semi-fixed resistor located at the side of optical
pick-up block.
Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
optical pick-up
Case of CDX-GT200: AEP, UK/GT200E/GT200S/GT250S
This compact disc player is classified as a CLASS 1 LASER
product. The CLASS 1 LASER PRODUCT label is located on the
exterior.
AEP, UK, E model
This label is located on the bottom of the chassis.
Chinese model
semi-fixed resistor
TEST DISCS
This set can playback CD-R and CD-ROM discs. The following
test discs should be used to check the capability:
CD-R test disc TCD-R082LMT (Part No. J-2502-063-1)
CD-RW test disc TCD-W082L (Part No. J-2502-063-2)
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
2
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES
SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT.
NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES
SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL
OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.
CDX-GT20W/GT200/GT200E/GT200S/GT250S
• CD playback
You can play CD-DA (also containing CD TEXT*), CD-R/CDRW (MP3/WMA files also containing Multi Session and ATRAC
CD (ATRAC3 and ATRAC3plus format).
Type of discs
Label on the disc
z
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
: LEAD FREE MARK
CD-DA
MP3
WMA
ATRAC CD
* A CD TEXT disc is a CD-DA that includes information such as
disc, artist and track name.
EXTENSION CABLE AND SERVICE POSITION
When repairing or servicing this set, connect the jig (extension cable)
as shown below.
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
• Connect the MAIN board (CNP301) and the SERVO board (CN2)
with the extension cable (Part No. J-2502-076-1).
MAIN BOARD
CNP301
J-2502-076-1
SERVO BOARD
CN2
3
CDX-GT20W/GT200/GT200E/GT200S/GT250S
TABLE OF CONTENTS
1. GENERAL
Location of controls and basic operations ............................... 5
Connections ............................................................................. 7
2. DISASSEMBLY
2-1. Sub Panel Assy .................................................................. 10
2-2. CD Mechanism Block ....................................................... 10
2-3. Main Board ....................................................................... 11
2-4. Chassis (T) Sub Assy ........................................................ 11
2-5. Roller Arm Assy ................................................................ 12
2-6. Chassis (OP) Assy ............................................................. 12
2-7. Optical Pick-up ................................................................. 13
2-8. SL Motor Assy (M902) ..................................................... 13
2-9. LE Motor Assy (M903) ..................................................... 14
2-10. Servo Board ....................................................................... 14
3. DIAGRAMS
3-1. Block Diagram – CD Section – ......................................... 15
3-2. Block Diagram – Main Section – ...................................... 16
3-3. Block Diagram – Display Section – .................................. 17
3-4. Circuit Boards Location .................................................... 17
3-5. Printed Wiring Boards – CD Mechanism Section – ......... 19
3-6. Schematic Diagram – CD Mechanism Section (1/2) – ..... 20
3-7. Schematic Diagram – CD Mechanism Section (2/2) – ..... 21
3-8. Printed Wiring Board – Main Section – ............................ 22
3-9. Schematic Diagram – Main Section (1/3) – ...................... 23
3-10. Schematic Diagram – Main Section (2/3) – ...................... 24
3-11. Schematic Diagram – Main Section (3/3) – ...................... 25
3-12. Printed Wiring Boards – Key Section – ............................ 26
3-13. Schematic Diagram – Key Section – ................................ 27
4. EXPLODED VIEWS
4-1.
4-2.
4-3.
4-4.
4-5.
4-6.
Main Section ..................................................................... 34
Front Panel Section ........................................................... 35
CD Mechanism Section (1) (MG-611WA-186//C) ........... 36
CD Mechanism Section (2) (MG-611WA-186//C) ........... 37
CD Mechanism Section (3) (MG-611WA-186//C) ........... 38
CD Mechanism Section (4) (MG-611WA-186//C) ........... 39
5. ELECTRICAL PARTS LIST ........................................ 40
4
CDX-GT20W/GT200/GT200E/GT200S/GT250S
SECTION 1
This section is extracted
GENERAL
from instruction manual.
• CDX-GT20W/GT200: US, Canadian
Location of controls and basic operations
Main unit
K SEEK –/+ buttons
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fastforward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
L SOURCE button
To power on; change the source (Radio/CD/
AUX).
M BTM button 8
To start the BTM function (press and hold).
CDX-GT200
CDX-GT20W
N MODE button 8
To select the radio band (FM/AM).
Card remote commander
RM-X151 (CDX-GT200 only)
OFF
SOURCE
ATT
SEL
MODE
–
A OFF button
To power off; stop the source.
P Number buttons
CD:
(3): REP 8
(4): SHUF 8
(6): PAUSE
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
B Volume control dial/select button 9
To adjust volume (rotate); select setup items
(press and rotate).
D Disc slot
To insert the disc (label side up), playback
starts.
2
3
E Display window
Q SENS button
To improve weak reception: LOCAL/
MONO.
5
6
F Z (eject) button
To eject the disc.
R Receptor for the card remote
commander 10
G SCRL (scroll) button 8
To scroll the display item.
S AUX input jack 10
To connect a portable audio device.
SCRL
DSPL
4
O RESET button (located behind the front
panel) 4
C EQ3 (equalizer) button 9
To select an equalizer type (XPLOD,
VOCAL, CLUB, JAZZ, NEW AGE, ROCK,
CUSTOM or OFF).
+
1
Refer to the pages listed for details.
+
VOL
–
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
w; < (.)/, (>) buttons
CD:
To control CD/Radio, the same as
(SEEK) –/+ on the unit.
wa VOL (volume) +/– button
To adjust volume.
ws ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
wd SEL (select) button
To select items.
wf M (+)/m (–) buttons
To control CD, the same as (GP/ALBM) –/+
on the unit.
wg Number buttons
To receive stored stations (press); store
stations (press and hold).
*1 When an ATRAC CD is played.
*2 When an MP3/WMA is played.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery” on page 12.
H DSPL (display)/DIM (dimmer) button
4, 8
To change display items (press); change the
display brightness (press and hold).
I GP*1/ALBM*2 +/– buttons
To skip groups/albums (press); skip groups/
albums continuously (press and hold).
J
(front panel release) button 4
6
7
• CDX-GT200: AEP, UK/GT200S
• CDX-GT200E
Location of controls and basic operations
Location of controls and basic operations
Main unit
Main unit
CDX-GT200E
CDX-GT200S
CDX-GT200
Refer to the pages listed for details.
A OFF button
To power off; stop the source.
B Volume control dial/select button 9
To adjust volume (rotate); select setup items
(press and rotate).
C EQ3 (equalizer) button 9
To select an equalizer type (XPLOD,
VOCAL, CLUB, JAZZ, NEW AGE, ROCK,
CUSTOM or OFF).
D Disc slot
To insert the disc (label side up), playback
starts.
E Display window
F Z (eject) button
To eject the disc.
G AF (Alternative Frequencies)/TA
(Traffic Announcement) button 7
To set AF and TA/TP in RDS.
H DSPL (display)/DIM (dimmer) button
4, 6
To change display items (press); change the
display brightness (press and hold).
I GP*1/ALBM*2 +/– buttons
To skip groups/albums (press); skip groups/
albums continuously (press and hold).
J
(front panel release) button 4
K SEEK –/+ buttons
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fastforward a track (press and hold).
Refer to the pages listed for details.
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
A OFF button
To power off; stop the source.
L SOURCE button
To power on; change the source (Radio/CD/
AUX).
B Volume control dial/select button 7
To adjust volume (rotate); select setup items
(press and rotate).
M PTY (Programme Type) button 8
To select PTY in RDS.
C EQ3 (equalizer) button 7
To select an equalizer type (XPLOD,
VOCAL, CLUB, JAZZ, NEW AGE, ROCK,
CUSTOM or OFF).
N MODE button 6
To select the radio band (FM/MW/LW).
D Disc slot
To insert the disc (label side up), playback
starts.
O RESET button (located behind the front
panel) 4
P Number buttons
CD:
(3): REP 6
(4): SHUF 6
(6): PAUSE
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
E Display window
Q SENS/BTM button
To improve weak reception: LOCAL/MONO
(press); start the BTM function (press and
hold).
I GP*1/ALBM*2 +/– buttons
To skip groups/albums (press); skip groups/
albums continuously (press and hold).
F Z (eject) button
To eject the disc.
G SCRL (scroll) button 6
To scroll the display item.
H DSPL (display)/DIM (dimmer) button
4, 6
To change display items (press); change the
display brightness (press and hold).
J
R Receptor for the card remote
commander 10
(front panel release) button 4
K SEEK –/+ buttons
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fastforward a track (press and hold).
S AUX input jack 10
To connect a portable audio device.
*1 When an ATRAC CD is played.
*2 When an MP3/WMA is played.
5
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
L SOURCE button
To power on; change the source (Radio/CD/
AUX).
M BTM button 6
To start the BTM function (press and hold).
N MODE button 6
To select the radio band (FM/MW/LW).
O RESET button (located behind the front
panel) 4
P Number buttons
CD:
(3): REP 6
(4): SHUF 6
(6): PAUSE
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
Q SENS button
To improve weak reception: LOCAL/
MONO.
R Receptor for the card remote
commander 8
S AUX input jack 8
To connect a portable audio device.
*1 When an ATRAC CD is played.
*2 When an MP3/WMA is played.
5
5
CDX-GT20W/GT200/GT200E/GT200S/GT250S
• CDX-GT250S
Location of controls and basic operations
Main unit
CDX-GT250S
Card remote commander
RM-X151
OFF
SOURCE
ATT
SEL
MODE
+
–
SCRL
DSPL
1
2
3
4
5
6
+
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A OFF button
To power off; stop the source.
B Volume control dial/select button 9
To adjust volume (rotate); select setup items
(press and rotate).
C EQ3 (equalizer) button 9
To select an equalizer type (XPLOD,
VOCAL, CLUB, JAZZ, NEW AGE, ROCK,
CUSTOM or OFF).
D Disc slot
To insert the disc (label side up), playback
starts.
E Display window
VOL
–
F Z (eject) button
To eject the disc.
G SCRL (scroll) button 8
To scroll the display item.
H DSPL (display)/DIM (dimmer) button
4, 8
To change display items (press); change the
display brightness (press and hold).
K SEEK –/+ buttons
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fastforward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
L SOURCE button
To power on; change the source (Radio/CD/
AUX).
wd ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
M BTM button 8
To start the BTM function (press and hold).
wf SEL (select) button
To select items.
N MODE button 8
To select the radio band (FM/AM).
wg M (+)/m (–) buttons
To control CD, the same as (GP/ALBM) –/+
on the unit.
O RESET button (located behind the front
panel) 4
P Frequency select switch (located on
the bottom of the unit)
See “Frequency select switch” in the
supplied installation/connections manual.
Q Number buttons
CD:
(3): REP 8
(4): SHUF 8
(6): PAUSE
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
wa < (.)/, (>) buttons
To control CD/Radio, the same as (SEEK)
–/+ on the unit.
ws VOL (volume) +/– button
To adjust volume.
wh Number buttons
To receive stored stations (press); store
sations (press and hold).
*1 When an ATRAC CD is played.
*2 When an MP3/WMA is played.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 12.
R SENS button
To improve weak reception: LOCAL/
MONO.
S Receptor for the card remote
commander
T AUX input jack 10
To connect a portable audio device.
I GP*1/ALBM*2 –/+ buttons
To skip groups/albums (press); skip groups/
albums continuously (press and hold).
J
6
6
(front panel release) button 4
7
CDX-GT20W/GT200/GT200E/GT200S/GT250S
• CONNECTIONS
• CDX-GT20W/GT200: US, Canadian/GT250S
*1
*1 RCA pin cord (not supplied)
*2 AUDIO OUT can be switched to SUB
or REAR.
For details, see the supplied
Operating Instructions.
*1 Cordon à broche RCA (non fourni)
*2 AUDIO OUT peut être commuté sur
SUB ou REAR.
Pour obtenir plus de détails, reportezvous au mode d’emploi fourni.
L
R
from car antenna
à partir de l’antenne de la voiture
BUS
AUDIO
IN
Fuse (10 A)
Fusible (10 A)
Blue/white striped
Rayé bleu/blanc
AMP REM
2
Max. supply current 0.3 A
Courant max. fourni 0,3 A
White
Blanc
Left
Gauche
Black
Noir
White/black striped
Rayé blanc/noir
Gray
Gris
Right
Droit
Blue
Bleu
Green
Vert
Left
Gauche
ANT REM
Max. supply current 0.1 A
Courant max. fourni 0,1 A
Gray/black striped
Rayé gris/noir
Red
Rouge
Green/black striped
Rayé vert/noir
Purple
Mauve
Right
Droit
Yellow
Jaune
Purple/black striped
Rayé mauve/noir
Connection diagram
Schéma de raccordement
1 To a metal surface of the car
1 À un point métallique de la voiture
First connect the black ground lead, then connect the yellow
and red power input leads.
2 To the power antenna control lead or power
supply lead of antenna booster amplifier
Notes
• It is not necessary to connect this lead if there is no power
antenna or antenna booster, or with a manually-operated
telescopic antenna.
• When your car has a built-in FM/AM antenna in the rear/
side glass, see “Notes on the control and power supply
leads.”
3 To AMP REMOTE IN of an optional power
amplifier
This connection is only for amplifiers. Connecting any other
system may damage the unit.
4 To the +12 V power terminal which is
energized in the accessory position of the
ignition key switch
Notes
• If there is no accessory position, connect to the +12 V
power (battery) terminal which is energized at all times.
Be sure to connect the black ground lead to a metal
surface of the car first.
• When your car has a built-in FM/AM antenna in the rear/
side glass, see “Notes on the control and power supply
leads.”
5 To the +12 V power terminal which is
energized at all times
Be sure to connect the black ground lead to a metal surface
of the car first.
Notes on the control and power supply leads
• The power antenna control lead (blue) supplies +12 V DC
when you turn on the tuner.
• When your car has built-in FM/AM antenna in the rear/side
glass, connect the power antenna control lead (blue) or the
accessory power input lead (red) to the power terminal of the
existing antenna booster. For details, consult your dealer.
• A power antenna without a relay box cannot be used with this
unit.
Memory hold connection
When the yellow power input lead is connected, power will
always be supplied to the memory circuit even when the ignition
switch is turned off.
Notes on speaker connection
• Before connecting the speakers, turn the unit off.
• Use speakers with an impedance of 4 to 8 ohms, and with
adequate power handling capacities to avoid its damage.
• Do not connect the speaker terminals to the car chassis, or
connect the terminals of the right speakers with those of the
left speaker.
• Do not connect the ground lead of this unit to the negative (–)
terminal of the speaker.
• Do not attempt to connect the speakers in parallel.
• Connect only passive speakers. Connecting active speakers
(with built-in amplifiers) to the speaker terminals may damage
the unit.
• To avoid a malfunction, do not use the built-in speaker leads
installed in your car if the unit shares a common negative (–)
lead for the right and left speakers.
• Do not connect the unit’s speaker leads to each other.
Note on connection
If speaker and amplifier are not connected correctly, “FAILURE”
appears in the display. In this case, make sure the speaker and
amplifier are connected correctly.
Branchez d’abord le câble de mise à la masse noir et,
ensuite, les câbles d’entrée d’alimentation jaune et rouge.
2 Vers le câble de commande d’antenne
électrique ou le câble d’alimentation de
l’amplificateur d’antenne
Remarques
• Il n’est pas nécessaire de raccorder ce câble s’il n’y a pas
d’antenne électrique ni d’amplificateur d’antenne, ou avec
une antenne télescopique manuelle.
• Si votre voiture est équipée d’une antenne FM/AM
intégrée dans la vitre arrière/latérale, voir « Remarques
sur les câbles de commande et d’alimentation ».
3 Au niveau de AMP REMOTE IN de
l’amplificateur de puissance en option
Ce raccordement s’applique uniquement aux amplificateurs.
Le branchement de tout autre système risque
d’endommager l’appareil.
4 À la borne +12 V qui est alimentée quand la
clé de contact est sur la position accessoires
Remarques
• S’il n’y a pas de position accessoires, raccordez la borne
d’alimentation (batterie) +12 V qui est alimentée en
permanence.
Raccordez d’abord le câble de mise à la masse noir à un
point métallique du véhicule.
• Si votre voiture est équipée d’une antenne FM/AM
intégrée dans la vitre arrière/latérale, voir « Remarques
sur les câbles de commande et d’alimentation ».
5 À la borne +12 V qui est alimentée en
permanence
Raccordez d’abord le câble de mise à la masse noir à un
point métallique du véhicule.
Remarques sur les câbles de commande et d’alimentation
• Le câble de commande d’antenne électrique (bleu) fournit une
alimentation de +12 V CC lorsque vous mettez la radio sous
tension.
• Lorsque votre voiture est équipée d’une antenne FM/AM
intégrée dans la vitre arrière/latérale, raccordez le câble de
commande d’antenne (bleu) ou l’entrée d’alimentation des
accessoires (rouge) à la borne d’alimentation de l’amplificateur
d’antenne existant. Pour plus de détails, consultez votre
détaillant.
• Une antenne électrique sans boîtier de relais ne peut pas être
utilisée avec cet appareil.
Raccordement pour la conservation de la mémoire
Lorsque le câble d’entrée d’alimentation jaune est raccordé, le
circuit de la mémoire est alimenté en permanence même si la clé
de contact est sur la position d’arrêt.
Remarques sur le raccordement des haut-parleurs
• Avant de raccorder les haut-parleurs, mettez l’appareil hors
tension.
• Utilisez des haut-parleurs ayant une impédance de 4 à 8 ohms
avec une capacité électrique adéquate pour éviter de les
endommager.
• Ne raccordez pas les bornes du système de haut-parleurs au
châssis de la voiture et ne raccordez pas les bornes des hautparleurs droit à celles du haut-parleur gauche.
• Ne raccordez pas le câble de mise à la masse de cet appareil
à la borne négative (–) du haut-parleur.
• N’essayez pas de raccorder les haut-parleurs en parallèle.
• Raccordez uniquement des haut-parleurs passifs. Le
raccordement de haut-parleurs actifs (avec amplificateurs
intégrés) aux bornes des haut-parleurs peut endommager
l’appareil.
• Pour éviter tout dysfonctionnement, n’utilisez pas les câbles
des haut-parleurs intégrés installés dans votre voiture si
l’appareil partage un câble négatif commun (–) pour les hautparleurs droit et gauche.
• Ne raccordez pas entre eux les cordons des haut-parleurs de
l’appareil.
Remarque sur le raccordement
Si les haut-parleurs et l’amplificateur ne sont pas raccordés
correctement, le message « FAILURE » s’affiche. Dans ce cas,
assurez-vous que les haut-parleurs et l’amplificateur sont bien
raccordés.
7
CDX-GT20W/GT200/GT200E/GT200S/GT250S
• CDX-GT200: AEP, UK/GT200E/GT200S
*1 Note for the aerial connecting
If your car aerial is an ISO (International
Organization for Standardization) type,
use the supplied adaptor 2 to connect
it. First connect the car aerial to the
supplied adaptor, then connect it to the
aerial jack of the master unit.
*2 RCA pin cord (not supplied)
3
* AUDIO OUT can be switched to SUB
or REAR. For details, see the supplied
Operating Instructions.
*2
AUDIO OUT REAR*3
L
L
*1 Hinweis zum Anschließen der Antenne
Wenn Ihre Fahrzeugantenne der
ISO-Norm (ISO = International
Organization for Standardization
- Internationale Normungsgemeinschaft)
entspricht, schließen Sie sie mithilfe des
mitgelieferten Adapters 2 an. Verbinden
Sie zuerst die Fahrzeugantenne mit dem
mitgelieferten Adapter und verbinden Sie
diesen dann mit der Antennenbuchse
des Hauptgeräts.
*2 Cinchkabel (nicht mitgeliefert)
3
* AUDIO OUT kann zwischen SUB
und REAR umgeschaltet werden.
Näheres hierzu finden Sie in der
Bedienungsanleitung.
*1 Remarque sur le raccordement de
l’antenne
Si votre antenne de voiture est de type
ISO (Organisation internationale de
normalisation), utilisez l’adaptateur fourni
2 pour la raccorder. Raccordez d’abord
l’antenne de voiture à l’adaptateur fourni
et, ensuite, à la prise d’antenne de
l’appareil principal.
*2 Cordon à broche RCA (non fourni)
*3 AUDIO OUT peut être commuté sur SUB
ou REAR. Pour obtenir plus de détails,
reportez-vous au mode d’emploi.
*1 Nota per il collegamento dell’antenna
Se l’antenna dell’auto è di tipo
ISO (International Organization for
Standardization), utilizzare l’adattatore
2 in dotazione per collegarla. Collegare
prima l’antenna della macchina
all’adattatore in dotazione, quindi
collegarla alla presa dell’antenna
dell’apparecchio principale.
*2 Cavo a piedini RCA (non in dotazione)
*3 AUDIO OUT può essere impostato
su SUB o su REAR. Per ulteriori
informazioni, consultare il manuale di
istruzioni per l’uso.
*1 Opmerking bij de antenne-aansluiting
Indien uw auto is uitgerust met een
antenne van het type ISO (International
Organisation for Standardization),
moet u die aansluiten met behulp
van de bijgeleverde adapter 2. Sluit
eerst de auto-antenne aan op de
meegeleverde adapter en vervolgens de
antennestekker op het hoofdtoestel.
*2 Tulpstekkersnoer (niet bijgeleverd)
*3 AUDIO OUT kan worden ingesteld
op SUB of REAR. Raadpleeg de
handleiding met gebruiksaanwijzingen
voor meer informatie.
R
1
*
from car aerial
von Autoantenne
de l’antenne de la voiture
dall’antenna dell’auto
van een auto-antenne
Max. supply current 0.3 A
max. Versorgungsstrom 0,3 A
Courant d’alimentation maximum 0,3 A
Alimentazione massima fornita 0,3 A
Max. voedingsstroom 0,3 A
2
Fuse (10 A)
Sicherung (10 A)
Fusible (10 A)
Fusibile (10 A)
Zekering (10 A)
AMP REM
Blue/white striped
Blauweiß gestreift
Rayé bleu/blanc
Rigato blu e bianco
Blauw/wit gestreept
ATT
Light blue
Hellblau
Bleu ciel
Azzurro
Lichtblauw
1
3
1
3
5
7
2
from the car’s speaker connector
vom Lautsprecheranschluss des Fahrzeugs
du connecteur de haut-parleur de la voiture
dal connettore del diffusore dell’auto
van de autoluidsprekerstekker
2
4
6
3
8
Purple
Violett
Mauve
Viola
Paars
Grey
Grau
Gris
Grigio
Grijs
4
+
Speaker, Rear, Right
Lautsprecher hinten rechts
Haut-parleur, arrière, droit
Diffusore, posteriore, destro
Luidspreker, achter, rechts
5
–
Speaker, Rear, Right
Lautsprecher hinten rechts
Haut-parleur, arrière, droit
Diffusore, posteriore, destro
Luidspreker, achter, rechts
6
+
Speaker, Front, Right
Lautsprecher vorne rechts
Haut-parleur, avant, droit
Diffusore, anteriore, destro
Luidspreker, voor, rechts
7
–
Speaker, Front, Right
Lautsprecher vorne rechts
Haut-parleur, avant, droit
Diffusore, anteriore, destro
Luidspreker, voor, rechts
8
White
Weiß
Blanc
Bianco
Wit
Green
Grün
Vert
Verde
Groen
+
Speaker, Front, Left
Lautsprecher vorne links
Haut-parleur, avant, gauche
Diffusore, anteriore, sinistro
Luidspreker, voor, links
–
Speaker, Front, Left
Lautsprecher vorne links
Haut-parleur, avant, gauche
Diffusore, anteriore, sinistro
Luidspreker, voor, links
+
Speaker, Rear, Left
Lautsprecher hinten links
Haut-parleur, arrière, gauche
Diffusore, posteriore, sinistro
Luidspreker, achter, links
–
Speaker, Rear, Left
Lautsprecher hinten links
Haut-parleur, arrière, gauche
Diffusore, posteriore, sinistro
Luidspreker, achter, links
Negative polarity positions 2, 4, 6, and 8 have striped leads.
An den negativ gepolten Positionen 2, 4, 6 und 8 be nden sich gestreifte Adern.
Les positions de polarité négative 2, 4, 6 et 8 sont dotées de cordons rayés.
Le posizioni a polarità negativa 2, 4, 6 e 8 hanno cavi rigati.
De posities voor negatieve polariteit (2, 4, 6 en 8) hebben gestreepte kabels.
5
See “Power connection diagram” on the reverse side for details.
4
4
Yellow
Gelb
Jaune
Giallo
Geel
continuous power supply
permanente Stromversorgung
alimentation continue
alimentazione continua
continu voeding
7
Red
Rot
Rouge
Rosso
Rood
switched power supply
geschaltete Stromversorgung
alimentation commutée
alimentazione commutata
geschakelde voeding
5
Blue
Blau
Bleu
Blu
Blauw
power aerial control
Motorantennensteuerung
antenne électrique
comando dell’antenna elettrica
automatische antenne
8
Black
Schwarz
Noir
Nero
Zwart
earth
Masse
masse
terra
aarding
7
from the car’s power connector
vom Stromanschluss des Fahrzeugs
du connecteur d’alimentation de la voiture
dal connettore di alimentazione dell’auto
van de autovoedingsstekker
8
Näheres dazu finden Sie im „Stromanschlussdiagramm“. Blättern
Sie dazu bitte um.
Voir le « Schéma de raccordement d’alimentation » au verso pour
plus de détails.
Positions 1, 2, 3, and 6 do not have pins.
An Position 1, 2, 3 und 6 befinden sich keine Stifte.
Les positions 1, 2, 3 et 6 ne comportent pas de broches.
Le posizioni 1, 2, 3 e 6 non hanno piedini.
De posities 1, 2, 3 en 6 hebben geen pins.
Per ulteriori informazioni, vedere “Diagramma dei collegamenti di
alimentazione” che si trova sul retro.
Zie "Voedingsaansluitschema" op de achterkant voor meer details.
Connection diagram
A To AMP REMOTE IN of an optional power
amplifier
This connection is only for amplifiers. Connecting any other
system may damage the unit.
B To the interface cable of a car telephone
Warning
If you have a power aerial without a relay box,
connecting this unit with the supplied power connecting
lead 3 may damage the aerial.
Notes on the control power and suppy leads
• The power aerial control lead (blue) supplies +12 V DC when
you turn on the tuner, or when you activate the AF (Alternative
Frequency) or TA (Traffic Announcement) function.
• When your car has built-in FM/MW/LW aerial in the rear/side
glass, connect the power aerial control lead (blue) or the
accessory power input lead (red) to the power terminal of the
existing aerial booster. For details, consult your dealer.
• A power aerial without a relay box cannot be used with this
unit.
Memory hold connection
When the yellow power input lead is connected, power will
always be supplied to the memory circuit even when the ignition
switch is turned off.
Notes on speaker connection
• Before connecting the speakers, turn the unit off.
• Use speakers with an impedance of 4 to 8 ohms, and with
adequate power handling capacities to avoid its damage.
• Do not connect the speaker terminals to the car chassis, or
connect the terminals of the right speakers with those of the
left speaker.
• Do not connect the earth lead of this unit to the negative (–)
terminal of the speaker.
• Do not attempt to connect the speakers in parallel.
• Connect only passive speakers. Connecting active speakers
(with built-in amplifiers) to the speaker terminals may damage
the unit.
• To avoid a malfunction, do not use the built-in speaker leads
installed in your car if the unit shares a common negative (–)
lead for the right and left speakers.
• Do not connect the unit’s speaker leads to each other.
Note on connection
If speaker and amplifier are not connected correctly, “FAILURE”
appears in the display. In this case, make sure the speaker and
amplifier are connected correctly.
Anschlussdiagramm
A An AMP REMOTE IN des gesondert
erhältlichen Endverstärkers
Dieser Anschluss ist ausschließlich für Verstärker gedacht.
Schließen Sie nichts anderes daran an. Andernfalls kann
das Gerät beschädigt werden.
B An Schnittstellenkabel eines Autotelefons
Warnung
Wenn Sie eine Motorantenne ohne Relaiskästchen
verwenden, kann durch Anschließen dieses Geräts mit
dem mitgelieferten Stromversorgungskabel 3 die
Antenne beschädigt werden.
Steuer- und Stromversorgungsleitungen
• Die Motorantennen-Steuerleitung (blau) liefert +12 V
Gleichstrom, wenn Sie den Tuner einschalten oder die
AF- (Alternativfrequenzsuche) oder die TA-Funktion
(Verkehrsdurchsagen) aktivieren.
• Wenn das Fahrzeug mit einer in der Heck-/
Seitenfensterscheibe integrierten FM (UKW)/MW/LWAntenne ausgestattet ist, schließen Sie die MotorantennenSteuerleitung (blau) oder die Zubehörstromversorgungsleitung
(rot) an den Stromversorgungsanschluss des vorhandenen
Antennenverstärkers an. Näheres dazu erfahren Sie bei Ihrem
Händler.
• Es kann nur eine Motorantenne mit Relaiskästchen
angeschlossen werden.
Ce raccordement existe seulement pour les amplificateurs.
Le raccordement à tout autre système peut endommager
l’appareil.
B Vers le cordon de liaison d’un téléphone de
voiture
Avertissement
Si vous disposez d’une antenne électrique sans boîtier
de relais, le branchement de cet appareil au moyen du
cordon d’alimentation fourni 3 risque d’endommager
l’antenne.
Remarques sur les câbles de commande et de puissance
• Le câble de commande (bleu) fournit du courant continu de
+12 V lorsque vous mettez le tuner sous tension ou lorsque
vous activez la fonction AF (fréquence alternative) ou TA
(informations circulation).
• Lorsque votre voiture est équipée d’une antenne FM/MW
(GO)/LW (PO) intégrée dans la vitre arrière/latérale,
raccordez le câble de commande d’antenne (bleu) ou
l’entrée d’alimentation des accessoires (rouge) au bornier
de l’amplificateur d’antenne existant. Pour plus de détails,
consultez votre revendeur.
• Une antenne électrique sans boîtier de relais ne peut pas être
utilisée avec cet appareil.
Stromversorgung des Speichers
Wenn die gelbe Stromversorgungsleitung angeschlossen ist,
wird der Speicher stets (auch bei ausgeschalteter Zündung) mit
Strom versorgt.
Raccordement pour la conservation de la mémoire
Lorsque le câble de commande d’antenne jaune est connecté,
le circuit de la mémoire est alimenté en permanence même si la
clé de contact est en position d’arrêt.
Hinweise zum Lautsprecheranschluss
• Schalten Sie das Gerät aus, bevor Sie die Lautsprecher
anschließen.
• Verwenden Sie Lautsprecher mit einer Impedanz zwischen 4 und
8 Ohm und ausreichender Belastbarkeit. Ansonsten können die
Lautsprecher beschädigt werden.
• Verbinden Sie die Lautsprecheranschlüsse nicht mit dem
Wagenchassis und verbinden Sie auch nicht die Anschlüsse
des rechten mit denen des linken Lautsprechers.
• Verbinden Sie die Masseleitung dieses Geräts nicht mit dem
negativen (–) Lautsprecheranschluss.
• Versuchen Sie nicht, Lautsprecher parallel anzuschließen.
• An die Lautsprecheranschlüsse dieses Geräts dürfen nur
Passivlautsprecher angeschlossen werden. Schließen Sie
keine Aktivlautsprecher (Lautsprecher mit eingebauten
Verstärkern) an, da das Gerät sonst beschädigt werden
könnte.
• Um Fehlfunktionen zu vermeiden, verwenden Sie nicht die
im Fahrzeug installierten, integrierten Lautsprecherleitungen,
wenn am Ende eine gemeinsame negative (–) Leitung für den
rechten und den linken Lautsprecher verwendet wird.
• Verbinden Sie nicht die Lautsprecherkabel des Geräts
miteinander.
Remarques sur le raccordement des haut-parleurs
• Avant de raccorder les haut-parleurs, mettre l’appareil hors
tension.
• Utiliser des haut-parleurs ayant une impédance de 4
à 8 ohms et une capacité adéquate sous peine de les
endommager.
• Ne pas raccorder les bornes du système de haut-parleurs au
châssis de la voiture et ne pas connecter les bornes du hautparleur droit à celles du haut-parleur gauche.
• Ne pas raccorder le câble de mise à la masse de cet appareil
à la borne négative (–) du haut-parleur.
• Ne pas tenter de raccorder les haut-parleurs en parallèle.
• Connectez uniquement des haut-parleurs passifs. La
connexion de haut-parleurs actifs (avec des amplificateurs
intégrés) aux bornes des haut-parleurs pourrait endommager
l’appareil.
• Pour éviter tout dysfonctionnement, n’utilisez pas les câbles
des haut-parleurs intégrés installés dans votre voiture si
l’appareil dispose d’un câble négatif commun (–) pour les
haut-parleurs droit et gauche.
• Ne raccordez pas entre eux les cordons des haut-parleurs de
l’appareil.
Hinweis zum Anschließen
Wenn Lautsprecher und Verstärker nicht richtig angeschlossen
sind, erscheint „FAILURE“ im Display. Vergewissern Sie sich
in diesem Fall, dass Lautsprecher und Verstärker richtig
angeschlossen sind.
8
Schémas de raccordement
A Au niveau du AMP REMOTE IN d’un
amplificateur de puissance facultatif
Remarque sur le raccordement
Si les enceintes et l’amplificateur ne sont pas raccordés
correctement, le message « FAILURE » s’affiche. Dans ce cas,
assurez-vous que les enceintes et l’amplificateur sont raccordés
correctement.
Schema di collegamento
A A AMP REMOTE IN di un amplificatore di
potenza opzionale
Questo collegamento è riservato esclusivamente agli
amplificatori. Non collegare un tipo di sistema diverso onde
evitare di causare danni all’apparecchio.
B Al cavo interfaccia di un telefono per auto
Avvertenza
Quando si collega l’apparecchio con il cavo di
alimentazione in dotazione 3, si potrebbe danneggiare
l’antenna elettrica se questa non dispone di scatola a relè.
Note sui cavi di controllo e di alimentazione
• Il cavo (blu) di controllo dell’antenna elettrica fornisce
alimentazione pari a +12 V CC quando si attiva il sintonizzatore
oppure la funzione TA (notiziario sul traffico) o AF (frequenza
alternativa).
• Se l’automobile è dotata di antenna FM/MW/LW incorporata
nel vetro posteriore/laterale, collegare il cavo (blu) di
controllo dell’antenna elettrica o il cavo (rosso) di ingresso
dell’alimentazione accessoria al terminale di alimentazione
del preamplificatore dell’antenna esistente. Per ulteriori
informazioni, consultare il proprio fornitore.
• Non è possibile usare un’antenna elettrica senza scatola a relè
con questo apparecchio.
Collegamento per la conservazione della memoria
Quando il cavo di ingresso alimentazione giallo è collegato, viene
sempre fornita alimentazione al circuito di memoria anche quando
l’interruttore di accensione è spento.
Note sul collegamento dei diffusori
• Prima di collegare i diffusori spegnere l’apparecchio.
• Usare diffusori di impedenza compresa tra 4 e 8 ohm e con
capacità di potenza adeguata, altrimenti i diffusori potrebbero
venir danneggiati.
• Non collegare i terminali del sistema diffusori al telaio dell’auto
e non collegare i terminali del diffusore destro a quelli del
diffusore sinistro.
• Non collegare il cavo di terra di questo apparecchio al terminale
negativo (–) del diffusore.
• Non collegare i diffusori in parallelo.
• Assicurarsi di collegare soltanto diffusori passivi, poiché il
collegamento di diffusori attivi, dotati di amplificatori incorporati,
ai terminali dei diffusori potrebbe danneggiare l’apparecchio.
• Per evitare problemi di funzionamento, non utilizzare i cavi dei
diffusori incorporati installati nell’automobile se l’apparecchio
condivide un cavo comune negativo (–) per i diffusori destro e
sinistro.
• Non collegare fra loro i cavi dei diffusori dell’apparecchio.
Nota sui collegamenti
Se l’amplificatore e il diffusore non sono collegati correttamente,
“FAILURE” viene visualizzato nel display. In tal caso, accertarsi
che l’amplificatore e il diffusore siano collegati correttamente.
Aansluitschema
A Naar AMP REMOTE IN van een optionele
eindversterker
Deze aansluiting is alleen bedoeld voor versterkers. Door
een ander systeem aan te sluiten kan het apparaat worden
beschadigd.
B Naar het interface-snoer van een
autotelefoon
Waarschuwing
Indien u een elektrische antenne heeft zonder relaiskast,
kan het aansluiten van deze eenheid met het bijgeleverde
netsnoer 3 de antenne beschadigen.
Opmerkingen over de bedienings- en voedingskabels
• De antennevoedingskabel (blauw) levert +12 V gelijkstroom
wanneer u de tuner inschakelt of de AF (Alternative
Frequency) of TA (Traffic Announcement) functie activeert.
• Wanneer uw auto is uitgerust met een FM/MW/LW-antenne
in de achterruit/voorruit, moet u de antennevoedingskabel
(blauw) of de hulpvoedingskabel (rood) aansluiten op de
voedingsingang van de bestaande antenneversterker.
Raadpleeg uw dealer voor meer details.
• Met dit apparaat is het niet mogelijk een automatische antenne
zonder relaiskast te gebruiken.
Instandhouden van het geheugen
Zolang de gele stroomdraad is aangesloten, blijft de
stroomvoorziening van het geheugen intact, ook wanneer het
contact van de auto wordt uitgeschakeld.
Opmerkingen betreffende het aansluiten van de luidsprekers
• Zorg dat het apparaat is uitgeschakeld, alvorens de
luidsprekers aan te sluiten.
• Gebruik luidsprekers met een impedantie van 4 tot 8 Ohm
en let op dat die het vermogen van de versterker kunnen
verwerken. Als dit wordt verzuimd, kunnen de luidsprekers
ernstig beschadigd raken.
• Verbind in geen geval de aansluitingen van de luidsprekers
met het chassis van de auto en sluit de aansluitingen van de
rechter- en linkerluidspreker niet op elkaar aan.
• Verbind de aarddraad van dit apparaat niet met de negatieve
(–) aansluiting van de luidspreker.
• Probeer nooit de luidsprekers parallel aan te sluiten.
• Sluit geen actieve luidsprekers (met ingebouwde versterkers)
aan op de luidspreker-aansluiting van dit apparaat. Dit zal
leiden tot beschadiging van de actieve luidsprekers. Sluit dus
altijd uitsluitend luidsprekers zonder ingebouwde versterker
aan.
• Om defecten te vermijden mag u de bestaande
luidsprekerbedrading in uw auto niet gebruiken wanneer er een
gemeenschappelijke negatieve (–) draad is voor de rechter- en
linkerluidsprekers.
• Verbind de luidsprekerdraden niet met elkaar.
Opmerking over aansluiten
Als de luidspreker en versterker niet correct zijn aangesloten,
wordt "FAILURE" in het display weergegeven. In dit geval moet u
zorgen dat de luidspreker en versterker correct zijn aangesloten.
CDX-GT20W/GT200/GT200E/GT200S/GT250S
SECTION 2
DISASSEMBLY
Note : This set can be disassemble according to the following sequence.
SET
2-1.
SUB PANEL ASSY
(Page 10)
2-2.
CD MECHANISM BLOCK
(Page 10)
2-3.
MAIN BOARD
(Page 11)
2-7.
2-4.
CHASSIS (T) SUB ASSY
(Page 11)
2-5.
ROLLER ARM ASSY
(Page 12)
2-6.
CHASSIS (OP) ASSY
(Page 12)
2-8.
SL MOTOR ASSY (M902)
(Page 13)
OPTICAL PICK-UP
(Page 13)
2-10. SERVO BOARD
(Page 14)
2-9.
LE MOTOR ASSY (M903)
(Page 14)
9
CDX-GT20W/GT200/GT200E/GT200S/GT250S
Note : Follow the disassembly procedure in the numerical order given.
2-1. SUB PANEL ASSY
3 two claws
2 two claws
1 two screws
(+PTT 2.6 × 6)
4 sub panel assy
2-2. CD MECHANISM BLOCK
6 bracket (CD)
7 CD mechanism block
5 two screws
(+PTT 2.6 × 4)
2 screw
(+PTT 2.6 × 6)
3
4 CNP301
1 screw
(+PTT 2.6 × 6)
10
CDX-GT20W/GT200/GT200E/GT200S/GT250S
2-3. MAIN BOARD
1 three screws
(+BTT 2.6 × 5)
2 two screws
(+PTT 2.6 × 8)
3 MAIN board
2-4. CHASSIS (T) SUB ASSY
4 claw
2 two screws
(+P 1.7 × 2.2)
1 two screws
(+P 1.7 × 2.2)
6 chassis (T) sub assy
5 SENSOR board
3 claw
11
CDX-GT20W/GT200/GT200E/GT200S/GT250S
2-5. ROLLER ARM ASSY
3 washer (1.1-2.5)
5 roller arm assy
4 gear (RA1)
2 spring (RAR)
1 spring (RAL)
2-6. CHASSIS (OP) ASSY
8
qa chassis (OP) assy
0 coil spring (damper)
lever (D)
4 washer
1 CN1
6
9 two coil springs (damper)
5 gear (LE1)
7
slider (R)
3 tension spring (KF60)
2 Remove the six solders.
12
CDX-GT20W/GT200/GT200E/GT200S/GT250S
2-7. OPTICAL PICK-UP
2 chucking arm sub assy
5 claw
1 tension coil spring (CHKG)
7 optical pick-up
6 main shaft
4 rack (SL)
3 screw
(+B 1.4 × 5)
2-8. SL MOTOR ASSY (M902)
1 screw
(+P 1.4 × 1.8)
2 SL motor assy (M902)
13
CDX-GT20W/GT200/GT200E/GT200S/GT250S
2-9. LE MOTOR ASSY (M903)
8 screw
(+M 1.7 × 2.5)
0 gear (LE) assy
9 bearing (LEB-N)
qf two toothed lock screws
(+M 1.4 )
2 washer
qa screw
(+M 1.7 × 2.5)
3 gear (LE1)
lever (D)
4
bracket (LEM-N)
qs screw
(+M 1.7 × 2.5)
qd
qg LE motor assy
(M903)
5
6 screw
(+P 1.7 × 2.2)
slider (R)
7 leaf spring (LE)
1 Remove the solders.
2-10. SERVO BOARD
1 Remove the eight solders.
6 SERVO board
2 Remove the three solders.
4 toothed lock screw
(M 1.7 × 2.5)
5 claw
3 CN1
14
CDX-GT20W/GT200/GT200E/GT200S/GT250S
SECTION 3
DIAGRAMS
3-1. BLOCK DIAGRAM — CD SECTION —
• R-ch is omitted due to same as L-ch.
• Signal Path
: CD PLAY
DETECTOR
PD1
PD2
PD2
96 FPI2
PD1
81 RFI
82 RFRPI
RFEQO 83
RFO 89
88 AGCI
RO 27
94 FNI2
CD-L
LO 30
A
MAIN
SECTION
(Page 16)
R-CH
97 FPI1
I-V AMP
95 FNI1
E
E
F
100 TNI
F
98 TPI
RF AMP,DIGITAL SERVO,
DIGITAL SIGNAL PROCESSOR
IC2
2 RFZI
RFRP 3
TEI 6
7 TEZI
PIO3
PIO0
MSTBY
ZDET
/RST
/CCE
BUCK
BUS3
BUS2
BUS1
BUS0
LASER DIODE
LD
PD
LD
AUTOMATIC
POWER
CONTROL
Q21
91 LDO
MDI 92
MON OUT
DEC XMUTE
DEC INT
DEC SSTBY
CD ZDET
CD XRST
CD XCCE
CD BUCK
CD BUS3
CD BUS2
CD BUS1
CD BUS0
UNI SI
56
25
57
26
58
50
51
60
UNI SO
UNI CLK
BUS ON
B/U CHECK
ATT
RSTX 75
SYS RST
SYSTEM CONTROL
IC501 (1/3)
EJECT OK
MECON
CDON
ZMUTE
61
63
64
66
89
99
98
93
CD
SYSTEM CONTROL
IC3
MECON CHK 67
OPTICAL
PICK-UP BLOCK
(KSS1000E)
2-AXIS DEVICE
37
30
27
15
14
13
12
11
10
8
7
51
48
36
58
37
43
42
41
40
39
38
UNISI
RXD
UNISO
TXD
UNICKI
BUS ON
BU IN
A ATT
FOCUS/TRACKING COIL DRIVE,
SLED/SPINDLE/LOADING
MOTOR DRIVE
IC1
FCS+
FCS–
16 VO4–
OPIN4– 26
15 VO4+
OPOUT4 25
18 VO3–
OPIN3– 23
17 VO3+
OPOUT3 22
80 X0
+1.5V
(FOCUS)
+1.5V ON/OFF
SWITCH
Q2,3
(TRACKING)
TRK+
TRK–
10 TRO
SW1
(DOWN)
SW2
(SELF)
M902
(SLED)
M
M901
(SPINDLE)
M
14 VO1+
OPOUT1 4
12 FMO
13 VO1–
OPOUT2 7
13 DMO
12 VO2+
11 VO2–
46 MEC_DSW
+1.5V
53 MEC_SELFSW
CDON 1
1500MV
SW3
(DISC IN)
45 MEC_INSW
SW4
(LIMIT)
42 MEC_LIMIT
MUTE 21
M903
(LOADING)
M
10 VOL+
9 VOL–
6 DRVON
FWD 1
43 MEC LOAD
REV 28
44 MEC EJECT
CDX-GT20W/GT200/GT200E/GT200S/GT250S
15
15
C
DISPLAY
SECTION
(Page 17)
EJECT OK SW
CDM ON
CD ON
Z MUTE
+1.5V REG
IC6
X1
12MHz
XO 24
(Page 16)
D+3.3V
81 X1
X2
16.9344MHz
9 F0O
MAIN
SECTION
MECHA+6V
CDON CHK 68
XI 23
B
5 VOUT
VDD 1
CE 3
BU+3.3V
CDX-GT20W/GT200/GT200E/GT200S/GT250S
3-2. BLOCK DIAGRAM — MAIN SECTION —
ELECTRONIC VOLUME
IC401
CD
SECTION
A
CD-L
R-CH
(Page 15)
AUX
AUX
BUFFER
IC901
TU1
(TUNER UNIT)
1 ANT
OUT SUB-L 17
OUT SUB-R 18
L
R-CH
R-CH
R
R-CH
R-CH
J901
J1
(ANTENNA)
9 CD LCH
8 CD RCH
5 AUX LCH
3 AUX RCH
IC2-BUS
CONTROLLED
POWER AMP/
MULTIPLE
VOLTAGE
REGULATOR
IC750
MUTE
Q481
L-CH 4
R-CH 3
7 TU LCH
6 TU RCH
OUT FL 23
12 IN FL
OUT RL 22
OUT FR 25
OUT RR 24
VCC 10
TU VDD 11
E2P VDD 15
TU-SCL 13
TU-SDA 14
11 IN RL
R-CH (FRONT)
R-CH (REAR)
MUTE
Q441
TU+5V
BU+3.3V
SCL 30
SDA 31
SCL
SDA
S-METER 6
TU MUTE 7
39 VSM
12 TU ATT
E2P SCL 16
E2P SDA 17
25 EEP CKO
24 EEP SIO
MUTE CONDITION 8
QUALITY 5
53 TU ATT IN
38 QUALITY
NS MASK
CONTROL
Q22
9 XTI
SCL
SDA
D511
SCL
SDA
ATT
BEEP
AMP STB
DIAG
86
5
26
8
16 BEEP
22 STB
25 DIAG
BATT
AUDIO8.3V
B.UP+B
SERVO3.3V
MECHA6V
PANEL+B
30
37
31
33
34
35 VP
TEL ATTENATION
CHECK
Q651
13
ACCESSORY
CHECK
Q631
ACC IN 72
56 DAVN
30 RDS ON
VDDD
7
BU IN 54
BATTERY CHECK
Q580-582
BATT
TU+5V
• R-CH is omitted due to same as L-CH.
• Signal Path
BU+3.3V
: CD PLAY
: FM
58 UNISI
UNI SI
: AM/MW/LW
D512
: AUX
59 UNISO
60 UNISCK
87 BUS ON
(Page 15)
B/U CHECK
ATT
CDX-GT20W/GT200/GT200E/GT200S/GT250S
16
16
7
15
TEST IN 73
D580,581
VDDA
1
16
AUDIO+8.3V
BU+3.3V
SERVO+3.3V
MECHA+6V
PANEL+B
10 XTO
RDS POWER
CONTROL
Q51
UNI CLK
BUS ON
BATT
AEP,UK
INTN 15
UNI SO
FU601
2 SDA
4 SCL
4
FR+
12
FR–
3
RR+
11
RR–
VOL ATT 9
TEL ATT 74
SCL 11
SDA 12
SDA
SCL
RL+
RL–
5
AMP-REM
6
ANT-REM
AMP-REM 29
ANT-REM 27
16 MPX
B
R-CH
BATT
13 NS MASK
RDS DEMODULATOR
IC51
GT200:AEP,UK
/GT200S
10
D479
MUTE DRIVE
Q478,479
SYSTEM CONTROL
IC501 (2/3)
RDS 9
2
OUT RL+ 9
OUT RL– 7
MUTE
Q461
SCL
SDA
X51
8.664MHz
CN601
1
FL+
9
FL–
OUT FL+ 5
OUT FL– 3
MUTE 29
AUDIO+8.3V
I2C CKO 33
I2C SIO 34
CD
SECTION
J330
REAR
AUDIO OUT
TU+5V REG
Q1
AUDIO+8.3V
TEL-MUTE
ACC
TEST
CDX-GT20W/GT200/GT200E/GT200S/GT250S
3-3. BLOCK DIAGRAM — DISPLAY SECTION —
3-4. CIRCUIT BOARDS LOCATION
SYSTEM CONTROL
IC501 (3/3)
LCD DRIVER
IC901
SERVO board
SENSOR board
41 KEYIN0
D503
KEY ACKNOWLEDGE
SWITCH
Q664
RE901
PUSH SELECT
(VOLUME)
LCD SO 28
LCD CKO 29
LCD CE 27
52 KEY ACK
76 XKEY ON
5
S1
|
|
55
S48 •
60
64 DI
CLK
63 CL
62 CE
LCD901
LIQUID
CRYSTAL
DISPLAY
PANEL
COM4 51
|
|
COM1 54
DIMMER
40 KEYIN1
BACK LIGHT
KEY MATRIX
LSW901-904,906-920
1
2
PANEL+B
ROTARY
ENCODER
31 RE-IN0
32 RE-IN1
(
LED932
LCD BACK
LIGHT
)
LED941-944,951
LSW901-904,906-920
BU+3.3V
(
S502
FREQUENCY
SELECTOR
)
3 AREASEL0
MAIN board
DIMMER
LED DRIVE
Q931
9K
GT250S
KEY board
LCD BACK LIGHT
LED DRIVE
Q932
7 NOSE DET
CD
SECTION
tuner unit
(TU1)
10K
JACK board
D510
C
SYS RST
(Page 15)
88 SYS RST
RESET
IC602
BU+3.3V
REMOTE CONTROL
SIGNAL REVEIVER
IC971
77 RESET
2 VDD VOUT 1
S702
RESET
X502
32.678kHz
SIRCS 64
2 OUT
IR
79 XOUT
80 XIN
OSC IN 82
OSC OUT 83
X501
18.432MHz
CDX-GT20W/GT200/GT200E/GT200S/GT250S
17
17
CDX-GT20W/GT200/GT200E/GT200S/GT250S
• NOTE FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
• WAVEFORMS
— SERVO BOARD — (CD PLAY)
THIS NOTE IS COMMON FOR PRINTED WIRING
BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary note is printed
in each block.)
1
For schematic diagrams.
For printed wiring boards.
Note:
• All capacitors are in µF unless otherwise noted. (p: pF)
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in Ω and 1/4 W or less unless otherwise
specified.
f
•
: internal component.
• C : panel designation.
Note:
• X : parts extracted from the component side.
• Y : parts extracted from the conductor side.
a
•
: Through hole.
: Pattern from the side which enables seeing.
•
(The other layers' patterns are not indicated.)
Note:
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part
number specified.
•
•
•
•
•
•
•
•
•
•
Note:
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
piéce portant le numéro
spécifié.
A : B+ Line.
B : B– Line.
H : adjustment for repair.
Voltages and waveforms are dc with respect to ground
under no-signal (detuned) conditions.
CD mechanism (1/2) and (2/2) sections
no mark : CD PLAY
Main (1/3), (2/3), (3/3) and Key sections
no mark : FM
(
) : AM/MW/LW
<
> : CD PLAY
∗
: Impossible to measure
Voltages are taken with a VOM (Input impedance 10 MΩ).
Voltage variations may be noted due to normal production tolerances.
Waveforms are taken with a oscilloscope.
Voltage variations may be noted due to normal production tolerances.
Circled numbers refer to waveforms.
Signal path.
J : CD PLAY
F : FM
f : AM/MW/LW
L : AUX
Caution:
Pattern face side:
(Side B)
Parts face side:
(Side A)
4
IC2 5 (FEI)
IC3 ia (X1)
Approx.
1Vp-p
0V
1.1 Vp-p
Approx. 100 mVp-p
12 MHz
Parts on the pattern face side seen from the
pattern face are indicated.
Parts on the parts face side seen from the
parts face are indicated.
50 mV/DIV, 5 msec/DIV
0.5 V/DIV, 0.5 µsec/DIV
2
5
IC2 6 (TEI)
C
0.5 V/DIV, 0.2 µsec/DIV
IC2 of (FNI2), og (FNI1)
0V
Q
7
IC2 ia (RFI)
1.5 Vp-p
Approx. 400 mVp-p
These are omitted
B E
200 mV/DIV, 5 msec/DIV
0.5 V/DIV, 0.5 µsec/DIV
3
6
IC2 wd (XI)
IC2 oh (FPI2), oj (FPI1)
0.6 Vp-p
BE C
1.5 Vp-p
These are omitted
16.9344 MHz
0.5 V/DIV, 0.5 µsec/DIV
0.2 V/DIV, 0.2 µsec/DIV
ECB
These are omitted
— MAIN BOARD —
1
3
IC51 9 (XTI)
IC501 is (OSC IN)
1 Vp-p
8.664 MHz
18.432 MHz
0.5 V/DIV, 0.1 µsec/DIV
2
1 V/DIV, 0.1 µsec/DIV
IC501 i; (XIN)
0.7 Vp-p
32.768 kHz
0.2 V/DIV, 0.1 µsec/DIV
CDX-GT20W/GT200/GT200E/GT200S/GT250S
18
18
0.8 Vp-p
CDX-GT20W/GT200/GT200E/GT200S/GT250S
3-5. PRINTED WIRING BOARDS — CD MECHANISM SECTION — • Refer to page 17 for Circuit Boards Location.
2
1
3
4
5
6
7
: Uses unleaded solder.
8
9
10
11
12
13
14
A
C52
C10
FB2
CN2
TP7
R141
TP2
TP9
TP82
TP85
R2
R57
FMB4
TP65
R72
R83
TP98
TP84
TP83
TP99
R74
TP3
R84
TP97
R147
R18
C44
R75
FMB5
R144
FB3
C69
R97
R3
TP14
TP13
1-864-903-
TP4
TP5
TP15
TP12
R9
TP86
TP8
(Page 22)
IC1
BP10
TP10
R1
TP11
FMA3
TP87
R5
TP76
SW2
TP75
TP81
TP1
G
TP79
TP80
TP6
R71
SW3
R73
TP78
TP69
TP70
R98
F
TP77
TP91
FMA5
R86
R78
R79
R81
R82
C67
C66
R87
R85
TP68
TP67
R96
TP92
C68
R80
X1
TP90
C62
TP62
TP74
TP89
TP61
R67
TP71
TP88
1
C70
R8
IC2
BP60
16
E
R64
TP95
TP63
R69
R21
R70
TP25
TP28
C12 R11
CN
IC3
C40
TP52
TP32
C43
R63
C11
D
TP51
R42
TP64
C42
TP50
R37
R60
R62
R61
TP22
R41
C39
TP31
TP33
C41
FMA4
R35
TP21
R77
C60
R29
TP72
R36
C58
R38
R39
R40
C36
TP49
C71
IC6
TP37
TP36
TP35
TP34
R68
R30
R19
R33
R26
R34
C45
C26
X2
R20
TP96
R27
R24
R23
R25
C133
Q2
R132
C32
C72
R22
R133
C80 C132
TP53
R54
R53
R52
R32
R31
C30
Q3
TP44
TP27
TP46
C29
TP48
TP47
R7
TP45
C47
C49
TP42
C23
C25
TP43
C33 R28
C13
R14
C31
C20
C22
C16
R10
R17
C
TP29
R15
C24
R55
R44
C15
R43
C54
C55
C14
C18
R13
C50
C53
C19
TP23
FB4
B
C48
C46
C56
Q21
R12
R58
TP39 TP38
R65
FMA6
TP41
FMB3
C51
TP30
C17
R16
TP26 TP24
SW1
C7
H
• Semiconductor
Location
CDX-GT20W/GT200/GT200E/GT200S/GT250S
19
19
Ref. No.
IC1
IC2
IC3
IC6
Location
G-2
B-11
D-2
D-2
Q2
Q3
Q21
C-1
C-2
B-4
CDX-GT20W/GT200/GT200E/GT200S/GT250S
3-6. SCHEMATIC DIAGRAM — CD MECHANISM SECTION (1/2) — • Refer to page 18 for Waveforms.
R7
C18
R10
R17
R55
R43
C15
R54
C45
R52
R44
C44
TP37
R53
TP35
C47
TP36
R57
TP34
C46
TP33
C49
TP32
C48
R18
TP31
C50
C51
TP52
IC6
R42
TP38
C52
TP39
C53
C80
R22
R23
TP53
R58
C54
C55
C56
IC2
R41
R24
R40
R25
R39
R26
R38
R27
Q2
R132
C132
C43
C24
R133
TP41
C19
CN1
C60
C133
C42
C41
C72
C11
R12
TP50
R29 R19
C40
R37
R30
C58
R36
C16
TP51
TP21
TP22
TP49
TP23
TP24
R13
TP25
R35
R11
C39
TP26
R33
TP27
R20
R31
C22
C20
TP28
C33
C32
TP43
TP44
TP42
C12
R32
C29
C36
TP47
FB3
TP48
TP45
C30
C31
TP46
R28
X2
R34
C26
C25
C13
C10
C23
Q21
TP29
R14
TP30
R15
FB2
C14
FB4
R16
C17
(Page 21)
CDX-GT20W/GT200/GT200E/GT200S/GT250S
20
20
Q3
CDX-GT20W/GT200/GT200E/GT200S/GT250S
• Refer to page 18 for Waveforms.
• Refer to page 28 for IC Block Diagrams.
3-7. SCHEMATIC DIAGRAM — CD MECHANISM SECTION (2/2) — • Refer to page 30 for IC Pin Descriptions.
(Page 20)
(Page 25)
R97
CN2
TP88
R98
TP80
R144
TP81
TP82
R147
C67
R85
TP70
R75
C66
R78
TP79
C68
R79
R87
R81
TP92
R80
TP91
TP78
R82
TP90
TP77
R83
TP76
R77
R86
TP67
TP89
R84
TP75
TP68
TP74
TP69
R141
TP83
TP97
TP84
TP98
TP85
TP99
C69
TP86
R74
X1
TP87
R73
R72
R96
R71
C70
TP1
SW4
TP2
IC3
TP65
IC B/D
R70
TP72
TP3
SW3
R5
TP64
R1
TP4
SW2
C62
BP60
R8
R6
TP5
TP71
TP63
R9
IC1
SW1
R69
R68
R2
TP62
C7
TP10
TP61
BP10
TP6
TP8
M902
TP9
CDX-GT20W/GT200/GT200E/GT200S/GT250S
21
21
R65
TP15
M901
C71
R63
TP13
R64
TP14
R62
TP7
R61
TP12
R60
TP11
R21
M903
R67
CDX-GT20W/GT200/GT200E/GT200S/GT250S
3-8. PRINTED WIRING BOARD — MAIN SECTION — • Refer to page 17 for Circuit Boards Location.
2
1
3
4
5
6
: Uses unleaded solder.
7
8
9
10
11
12
13
14
J330
REAR
AUDIO OUT
J1
(ANTENNA)
A
L
R
YEL
JC753
JC754
C474
C484
JC755
JC795
C775
CN601
C774
JW144
FU601
C751
R482
C771
B
JW1
JW153
R661
JW168
R663
JC756
D752
FB304
R514
D503
GT200:AEP,UK/GT200S
R565
R671
FMB4
Q664
R535
R543
R556
EXCEPT AEP,UK
JW82
C519
JW62
FB303
JW45
JW127
R563
YEL
R583
R582
R631
AEP,UK
R564
R540
R541
Q581
Q582
R601
R584
FB606
IC602
R673
R585
X501
11
1-868-117-
CN701
S702
RESET
(Page 26)
CDX-GT20W/GT200/GT200E/GT200S/GT250S
22
JW145
JW120
JW146
R542
C631
S702
GT200:AEP,UK/GT200S
GT20W/GT200:US,CND/
GT200E/GT250S
JC533
R632
R633
JW119
R636
R547
JW65
R536
GT200:AEP,UK
/GT200S
J
C305
JW28
JW56
JW99
R691
R692
R568
R517
R561
JC504
R519
JW125
D719
R901
R672 D512
R533
JW75
JC501
C502
R567
C301
C343
C406
C514
R513
C918
D601
JW26
JW30
JW50
50
IC
C516
R503
D502
C509
JW141
D903
C512
C501
R529
R679
• Semiconductor Location
Q631
JC527
R674
JW87
R505
JW68
R502
R504
FB603
R518
R558
JW105
JW104
C917
R902
R521
JW86
JW139
JW138
C507
R512
R510
JW140
R522
R904
I
C508
X502
C513
JW74
JW133
JW128
C902
C503
R511
JW126
JW108
JW70
JW76
R903
C901
FB501
JW54
C903
JW71
R906
R905
D760
D759
D751
D753
D754
JW23
JW118
R508
R634
R578
D510
C504
R570
R911
R913
R914
IC901
R912
R609
JW8
JW137
JW7
JW6
JW10
GT20W/GT200/
GT200S/GT250S
1
C51
R577
R509
JW44
R664
JW154
L501
C511
C510
JW53
JW155
R907
JW148
AEP,UK,E.MX
R539
JW52
C60
R566
R676
EXCEPT
AEP,UK,
R544
JW109
R675
GT200E
JW51
C905
C59
R756
(Page 19)
JW117
C306
JW63
C58
FB309
FB308
JW48
IC51
GT200:AEP,UK/GT200S
R575
R662
R537
D580
C312
JW149
JW122
R56
R910
JW29
JW132
JW131
R557
JW121
C407
FMB3
JW166
JW169
JW167
R532
Q580
FB310
FB604
R531
D511
JW49
R53
10K
R757
JW80
R61
JW85
X51
R534
R302
FB307
R301
X501
R54
JW123
R694
C53
C57
JW84
C310
C309
CDX-GT200:AEP,UK/GT200E/GT200S
BATT
D581
FB305
GT200E
R551
R549
R677
GT250S
R538
R681
R546
US,CND
R528
R550
R573 AEP,UK
R506
R520 R507
9K
JW40
R57
R55
R51
R52
C756
JW156
R60
R58
JW89
JW83
R59
GT250S
R545
S502
FREQUENCY
SELECT
JW67
C54
C56
GT250S
JW69
C55
C479
IC401
FB410
R4
R8
Q51
L51
C62
JW160
R9
R6
JW161
JW162
JW60
R5
H
JW81
JW90
R7
GT20W/GT200/GT200S
JW106
JW115
C308
FB605
C410
R12
JW100
JW96
C755
C411
Q1
R13
C7
G
JW164
JW150
C302
JW66
C4
C5
JW27
FB302
L301
Q479
JW95
C754
R752
JW103
JW101
JW165
JW163
C3
JW94
R3
FB1
CNP301
C622
JW97
JW130
JW72
L1
JW39
JC681
JW129
JW124
Q478
R479
R410
FB411
F
JW93
R411
JW91
D1
R2
JW31
JW32
JW111
D479
R407
C6
D762
R652
AEP,UK
JW42
C776
R406
R1
C13
JW24
JW92
R408
R409
C12
D609
R654
JW25
R461
JW102
C623
JW88
C413
C2
L601
D761
Q651
R401
CDX-GT20W/GT200:US,CND/GT250S
C602
C770
C412
C1
JW11
C750
R405
R29
D651
AEP,UK
R653
Q461
Q22
E
R651
JW18
C401
C405
D755
C465
C451
JW20
R462
C431
GT200:AEP.UK
/GT200S
AEP,UK
R452
C441
C481
D
C769
C758
C461
TU1
Q451
R451
R441
C471
JC1
C455
R471
C462
C601
C618
JW17
D757
C452
R481
C617
D617
JW5
C435
JW142
JW143
C753
C432
R431
C404
JW16
C445
Q481
C
C442
D758
JW21
JW14
JW15
JW22
R432
JW13
R442
JW12
C763
R472
JW2
JW3
JW58
Q431
Q441
D756
Q471
IC750 C764 JW9
C765
22
(11)
Ref. No.
D1
D479
D502
D503
D510
D511
D512
D580
D581
D601
D609
D617
D651
D719
D751
D752
D753
D754
D755
D756
D757
D758
D759
D760
D761
D762
Location
F-3
E-6
I-7
I-5
H-8
F-6
H-8
F-11
F-11
C-10
D-8
C-9
C-9
I-4
D-7
D-7
D-7
D-7
C-5
C-6
C-6
C-6
D-8
D-8
C-9
D-9
Ref. No.
D903
Location
I-3
IC51
IC401
IC501
IC602
IC750
IC901
H-2
E-3
H-6
I-9
B-6
H-2
Q1
Q22
Q51
Q431
Q441
Q451
Q461
Q471
Q478
Q479
Q481
Q580
Q581
Q582
Q631
Q651
Q664
F-2
E-2
G-2
B-4
B-4
C-4
D-4
B-3
E-6
E-5
C-3
F-11
I-10
I-10
H-10
D-8
I-7
CDX-GT20W/GT200/GT200E/GT200S/GT250S
• Refer to page 18 for Waveforms.
3-9. SCHEMATIC DIAGRAM — MAIN SECTION (1/3) — • Refer to page 28 for IC Block Diagrams.
TU1
J330
R13
R3
R2
J1
R12
JC1
C484
C474
IC B/D
C7
C3
IC401
C401
FB1
FB411
FB410
C411
C410
JW102
C5
C2
R8 R29
R6
R4
C1
C413
R7
C13
C405
Q22
JW126
C404
R405
R9
D1
R407
C6
C451
R409
Q1
C441
L1
Q51
R905
JW60
C461
C51
R906 R912
R60
R52
C455
C452
R441
C445
C442
C465
C462
Q431
R452
Q451
R442
Q441
R462
Q461
R461
R913
C58
R54
C56
C481
R61
R481
R482
R53
C55
C57
C54
R451
R432
R410
L51
C53
C432
R401
R411
R51
C435
R431
R408
C407
R1
C12
C431
R406
R5
C406
C4
C412
JW169
R472
C471
C902
IC51
C901
Q481
Q471
(Page 24)
R471
IC901
Q479
IC B/D
D479
R55
R56
R57
R58
R59
C62
JW85
R914
C903
R904
Q478
R903
R907
C59
C479
R911
C60
JW84
X51
C905
D903
R910
(Page 25)
CDX-GT20W/GT200/GT200E/GT200S/GT250S
23
23
CDX-GT20W/GT200/GT200E/GT200S/GT250S
3-10. SCHEMATIC DIAGRAM — MAIN SECTION (2/3) — • Refer to page 29 for IC Block Diagrams.
JC795
C775
C765
C764
C774
IC B/D
C751
D751
D752
C750
D753
D754
JC754
JC755
D755
D756
IC750
D757
CN601
D758
D759
D760
R651
JC753
(Page 23)
R609
C753
FU601
D761
C769
R752
R479
C770
C755
JW111
C623
C622
C776
C758
Q631
R633
C631
R631
R632
JW53
Q651
R652
R654
(Page 25)
CDX-GT20W/GT200/GT200E/GT200S/GT250S
24
C618
L601
C771
JC681
C617
D617
C602
C756
R634
D762
C754
JC756
D651
C763
24
R653
D609
C601
D601
CDX-GT20W/GT200/GT200E/GT200S/GT250S
• Refer to page 18 for Waveforms.
3-11. SCHEMATIC DIAGRAM — MAIN SECTION (3/3) — • Refer to page 32 for IC Pin Descriptions.
(Page 23)
JW45
(Page 24)
JW149
D510
FB603
L301
(Page 21)
JW146
JW145
JC527
D719
CN701
FB304
CNP301
JW148
R578
JW127
FB303
C343
C301
JW140
C308
C302
FB310
FB305
R302
FB302
FB307
FB306
C310
C309
C312
JW120
(Page 27)
D512
R301
R901
R902
C917
C918
R679
JW141
FB309
JW128
JC533
C306
C305
JW28
JW99
FB308
FB604
D511
R531
R564
R556
R519
R533
R535
R536
IC602
FB606
R601
R691
X502
R672
R636
R518
R529
R692
JW48
C507
JW86
JW49
C508
D502
R674
R558
S702
C509
R543
R568
R517
R547
JC501
C519
JW125
FB605
R542
Q664
R541
R563
R561
X501
R585
R565
R508
R540
R584
D503
L501
Q581
R567
C510
R509
JC504
C514
D580
C511
R582
Q582
R566
R675
R676
R671 C502
R505
Q580
D581
R539
R673
R503
C512
IC501
R502
C501
C516
C513
R528
R681
R677
R661 R522
S502
R521
R663
R550
R537
R551
R538
R549
R507
R506
R520
R573
R545
R546
C503
FB501
R664
R570
R514
R532
R511
R510
R575
R694
R577
R512
R662
R534
R757
R557
R544
C504
R513
R756
R504
CDX-GT20W/GT200/GT200E/GT200S/GT250S
25
25
C516
R583
CDX-GT20W/GT200/GT200E/GT200S/GT250S
3-12. PRINTED WIRING BOARDS — KEY SECTION — • Refer to page 17 for Circuit Boards Location.
2
3
4
LSW902
LED941-944
(RING ILLUMINATION)
R960
LSW906
LSW901
LSW901
LED951
(DISC SLOT)
LSW907
z/SCRL
LSW907
z/AF/TA
(GT200:AEP,UK/GT200S)
LCD901
LIQUID CRYSTAL DISPLAY PANEL
LED932
LSW909
LSW920
LSW920
DSPL/DIM
LED944
R958
R959
1
R954
52
1
4
2
3
R909
LSW911
LED942
R952
IC971
R953
LSW904
13
12
( GT20W/GT200:US,CND/
(
GT200E/GT250S
R964
R961
R903
C
11
R957
LED941
LSW904
GP/ALBM
–
10
LSW908
R962
LSW910
SEEK–
9
LED951
LED943 R963
LSW910
8
R942
LED932
(LCD BACK LIGHT)
PTY (GT200:AEP,UK/GT200S)
R902
B
LSW906
GP/ALBM
+
7
R972
R941
6
LSW908
EQ3
LSW909
SEEK+
M >
LSW911
BTM (GT20W/GT200:US,CND/GT200E/GT250S)
A
LSW902
OFF
5
IC971
1
: Uses unleaded solder.
LSW912
LSW903
LSW913
LSW915
LSW914
LSW917
LSW916
LSW918
R916
R910
LSW919
11
R917 R918
1-868-118- (11)
D
LSW913
1
LSW912
MODE
LSW903
SOURCE
LSW914
LSW915
3/REP
2
LSW917
5
LSW916
4/SHUF
LSW919
SENS (GT20W/GT200:US,CND/GT200E/GT250S)
LSW918
6/PAUSE
(GT200:AEP,UK/GT200S)
SENS/BTM
11
E
(11)
1-868-119-
J901
AUX
F
RED
R
BLK
(Page 22)
WHT
MAIN BOARD
CN701
11
L
1-868-119-
(11)
B
R912
R913
R914
R946
R950
R951
C983
R986
C984
C981
RE901
PUSH SELECT
(VOLUME)
C971
WHT
RED
R
G
L
R982
D982
R933
R932 R944
R901
D981
R981
R945
FMB3
R987
R931
5
R985
RE901
C986
C985
R904
R905
IC901
R906
BLK
Q931
R974
D901
R956
4
R976
FB902
D903
Q932
FB903
FMB4
FB901
R955
• Semiconductor
Location
CN901
R947
R977
R979
R978
2
R948
R991
3
R934
1
R949
R907 R908
H
R915
R984
C922
R911
R922
C921
R921
G
I
G
1-868-118-
J
CDX-GT20W/GT200/GT200E/GT200S/GT250S
26
26
11
(11)
Ref. No.
D901
D903
D981
D982
Location
H-10
H-10
I-10
I-10
IC901
IC971
I-8
C-12
LED932
LED941
LED942
LED943
LED944
LED951
B-5
C-2
C-3
B-3
C-4
B-7
Q931
Q932
H-5
H-5
CDX-GT20W/GT200/GT200E/GT200S/GT250S
3-13. SCHEMATIC DIAGRAM — KEY SECTION —
R981
LSW909(2/2)
LSW902(2/2)
LSW907(2/2)
LSW919(2/2)
LSW916(2/2)
LSW914(2/2)
LSW904(2/2)
LSW908(2/2)
R972
R982
R952
R955
R957
R959
R956
R958
R960
R941
R931
LED951
LSW918(2/2)
LSW913(2/2)
LSW903(2/2)
IC971
LSW910(2/2)
R932
R933
LSW906(2/2)
LSW911(2/2)
R942
C971
LSW901(2/2)
LSW920(2/2)
LSW917(2/2)
LSW915(2/2)
LSW912(2/2)
LED932
R946
R944
R950
R948
LED941
R953
LED943
Q931
C981
R949
R951
R954
R961
R963
R962
R964
LED942
R984
C984
R985
R986
R987
C985
LED944
IC901
D982
R947
D981
R945
R934
C983
C986
R977
R978
R979
Q932
R991
D901
CN901
D903
LCD901
R976
RE901
R974
R922
R901
R902
R903
R921
R905
R904
R910
R911
R912
R913
R914
LSW909(1/2)
LSW910(1/2)
LSW911(1/2)
LSW912(1/2)
LSW913(1/2)
LSW914(1/2)
LSW915(1/2)
LSW916(1/2)
R915
R916
R917
R918
LSW920(1/2)
R909
LSW919(1/2)
R908
LSW906(1/2)
LSW904(1/2)
R907
LSW918(1/2)
LSW903(1/2)
R906
LSW917(1/2)
LSW902(1/2)
C921
LSW908(1/2)
FB903
FB902
FB901
(Page 25)
LSW907(1/2)
LSW901(1/2)
C922
J901
CDX-GT20W/GT200/GT200E/GT200S/GT250S
27
27
CDX-GT20W/GT200/GT200E/GT200S/GT250S
• IC BLOCK DIAGRAMS
MUTE
SEL
ADJ
VCC
OUT
FR
OUT
RR
OUT
FL
OUT
RL
NC
NC
NC
OUT
SUB R
OUT
SUB L
FWD REV
SCL
28 REV
FWD 1
SDA
IC401 BD3806AFS-E2 (MAIN Board (1/3))
DGND
IC1 BA5968FP-E2 (SERVO Board (2/2))
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
27 OPIN4+
LDCTL 2
VCC
OUTR OUTF
NC 3
26 OPIN4–
OPOUT1 4
25 OPOUT4
NC 5
FADER
(0~-58,
-∞dB)
24 OPIN3+
2
I C BUS
LOGIC
NC 6
VCO
FADER
(0~-58,
-∞dB)
FADER
(0~-58,
-∞dB)
FADER
(0~-58,
-∞dB)
GAIN+ATT
(+10~-29,
-∞dB)
23 OPIN3–
OPOUT2 7
POWVCC 8
VOL– 9
2ND ORDER LPF
fc:OFF,80,120,160Hz
Q: 0.707
22 OPOUT3
VCC
BASS
fo:60,70,80,100,120,140,160,200Hz
Q:0.5,0.75,1,1.25
21 MUTE
20 VOL+
19 GND
MUTE
VOL+ 10
18 VOL3–
VOL2– 11
LEVEL
SHIFT
LEVEL
SHIFT
VOL2+ 12
17 VOL3+
VO1– 13
2ND ORDER
LPF
MIX
TONE
PASS
TONE
PASS
MIDDLE
fo:500Hz,1kHz
Q:1
BASS,TREBLE, MIDDLE
(-15dB~+15dB,1dB STEP)
BASS,TREBLE, MIDDLE
(-15dB~+15dB,1dB STEP)
TABLE
fo:5,7.5,10,12.5kHz
VOLUME
(+23~-79dB,-∞dB
1dB STEP)
VOLUME
(+23~-79dB,-∞dB
1dB STEP)
16 VOL4–
LEVEL
SHIFT
LEVEL
SHIFT
VO1+ 14
fc:53.3kHz
15 VOL4+
fc:53.3kHz
ANTI-ALIASING
FILTER
ANTI-ALIASING
FILTER
INPUT GAIN
(0~15dB,1dB STEP)
INPUT GAIN
(0~15dB,1dB STEP)
MUTE
MUTE
INPUT SELECTOR
(3 STEREO INCLUDE 1 ISOLATION INPUT)
IC51 TDA7333013TR (MAIN Board (1/3))
REF2 3
REF1 4
VSS 5
RAM
RDS
RDSREG BUFFER
INTN DEMODULATOR &
&
SYNCHRONIZATION
CONTROL
LOGIC
TM 6
VDDD 7
15 INTN
SDAOUT
SDAIN
TEST LOGIC
SCK
I C/SPI
&
INTERFACE SPI
PIN MUX'S
TESTREG
2
14
13
12
11
CSN
SA_DATAOUT
SDA_DATAIN
SCL_CLK
2
10 XTO
OSCILLATOR
9 XTI
RESETN 8
CDX-GT20W/GT200/GT200E/GT200S/GT250S
28
28
5
6
7
8
9
10
11
12
13
14
15
16
TU
RCH
TU
LCH
CD
RCH
CD
LCH
NC
NC
NC
NC
NC
NC
NC
16 MPX
4
AUX
LCH
SIGMA DELTA
CONVERTER
SINC4REG
MPX
REF3 2
SINC4
FILTER
3
AN
BAND PASS
FILTER
2
AUX
RCH
INTERPOLATOR
VDDA 1
1
FIL
3
AGND
VCC/2
CDX-GT20W/GT200/GT200E/GT200S/GT250S
IC750 TDA8588BJ/N2/R1 (MAIN Board (2/3))
TAB 1
2 SDA
OUT-FL- 3
I2C BUS
4 SCL
FL
OUT-FL+ 5
6 VP2
OUT-RL- 7
RL
8 PGND3
OUT-RL+ 9
PROTECTION/
DIAGNOSTIC
IN-RR 15
12 IN-FL
14 IN-FR
MUTE
S-GND 13
10 SVR
MUTE
IN-RL 11
16 BEEP
VP
OUT-RR+ 17
RR
18 PGND2
OUT-RR- 19
20 VP1
OUT-FR+ 21
FR
OUT-FR- 23
STANDBY/
MUTE
22 STB
CHIP DETECT/
DIAGNOSTIC
24 PGND1
BATTERY
DETECTION
DIAG 25
TEMPERATURE
PROTECTION
ENABLE
LOGIC
26 RST
ANT-REM 27
SWITCH
AMP-REM 29
SWITCH
28 CRES
REGULATOR
30 AUDIO8.3V
SERVO5V 31
MECH6V 33
32 GND
34 PANEL+B
VP 35
REFERENCE
VOLTAGE
B.UP+B 37
REGULATOR
36 CBU
LOADDUMP
PROTECTION
BACK-UP
SWITCH
29
CDX-GT20W/GT200/GT200E/GT200S/GT250S
• IC Pin Descriptions
IC3 MB90486BPFV-G-158E1 (CD SYSTEM CONTROL) (SERVO BOARD (2/2))
Pin No.
1
Pin Name
CDON 1500MV
I/O
O
Pin Description
Servo 1.5 V power supply control signal output
2 to 5
6
NC
DRVON
—
O
Not used. (Open)
Motor drive on/off control signal output
7
8
CD BUS0
CD BUS1
I/O
I/O
Bus data signal input/output 0
Bus data signal input/output 1
9
10
VSS
CD BUS2
—
I/O
Ground pin
Bus data signal input/output 2
11
12
CD BUS3
CD BUCK
I/O
O
Bus data signal input/output 3
Bus clock signal output
13
14
CD XCCE
CD XRST
O
O
Chip enable signal output
Reset signal output
15
16 to 20
CD ZDET
NC
I
—
Zero detection signal input
Not used. (Open)
21
22
VCC
DAC ZDETL
—
I
Power supply pin (+3.3 V)
Zero data detection signal input (L-ch)
23
24
DAC ZDETR
NC
I
—
Zero data detection signal input (R-ch)
Not used. (Open)
25
26
RXD
TXD
I
O
UART RXD data signal input (MCBUS/Flash data input)
UART TXD data signal output (MCBUS/Flash data output)
27
28, 29
DEC SSTBY
NC
O
—
SRAM STANDBY mode control signal output
Not used. (Open)
30
31, 32
DEC INT
NC
I
—
Request signal input
Not used. (Open)
33
34
AVCC
AVRH
—
—
Power supply pin (+3.3 V) for A/D converter
External reference voltage for A/D converter
35
36
AVSS
NC
—
—
Ground pin
Not used. (Open)
37
38, 39
DEC XMUTE
NC
O
—
Mute signal output
Not used. (Open)
40
41
VSS
NC
—
—
Ground pin
Not used. (Open)
42
43
MEC LIMIT
MEC LOAD
I
O
Sled limit in detection switch signal input
Loading motor signal output (Load direction)
44
45
MEC EJECT
MEC INSW
O
I
Loading motor signal output (Eject direction)
Pack-in detection signal input
46
47, 48
MEC DSW
MD0, MD1
I
I
Chucking end detection switch signal input
CPU operation mode designation signal input (Connect to Vcc.)
49
50
MD2
BUS ON
I
I
CPU operation mode designation signal input (Connect to Vss.)
Bus on signal input L: bus on
51
52
BU IN
NC
I
—
Backup on/off signal input
Not used. (Open)
53
54, 55
MEC SELFSW
NC
I
—
Disc insert detection switch signal input
Not used. (Open)
56
57
UNISI
UNISO
I
O
Serial data signal input
Serial data signal output
58
59
UNICKI
LINEOFF
I
O
Serial clock signal input
Line off signal output
60
61
A ATT
EJECT OK
O
I
Audio attenuation signal output H: ATT on
Front panel open signal input H: eject
62
63
OPEN REQ
MECON
O
O
Front panel open/close request signal output H: open request
Mechanism deck power supply control signal output
30
L: mute
H: backup on, L: backup off
L: disc in interruption
CDX-GT20W/GT200/GT200E/GT200S/GT250S
Pin No.
Pin Name
I/O
64
65
CDON
XUART
O
I
Servo power supply control signal output H: power on
Sony-Bus/MC-Bus change signal input H: Sony-Bus, L: MC-Bus
Pin Description
66
67
ZMUTE
MECON CHK
O
I
Zero detection mute signal output
MECON rising detection signal input
68
69 to 74
CDON CHK
NC
I
—
CDON rising detection signal input
Not used. (Open)
75
76
RSTX
NC
I
—
System reset signal input
Not used. (Open)
77
78
X1A
X0A
—
—
Sub-clock connect pin
Sub-clock connect pin
79
80
VSS
X0
—
I
Ground pin
Main-clock connect pin (12 MHz)
81
82
X1
VCC
O
—
Main-clock connect pin (12 MHz)
Power supply pin (+3.3 V)
83
84
XWD
XINIT3
I
I
Not used in this set. (Open)
Not used in this set. (Open)
85
86
NC
XSJIG
—
I
Not used. (Open)
Not used in this set. (Open)
87 to 89
90 to 96
XINIT0 to 2
NC
I
—
Not used in this set. (Open)
Not used. (Open)
97
98
XDES
XLINE
I
I
Mode select pin
Not used in this set. (Open)
99, 100
NC
—
Not used in this set. (Open)
Not used in this set. (Connect to Vss.)
Not used. (Open)
31
CDX-GT20W/GT200/GT200E/GT200S/GT250S
IC501 MB90487APF-G-155E1 (SYSTEM CONTROL) (MAIN BOARD (3/3))
Pin No.
1
Pin Name
AREASEL2
I/O
I
Destination setting pin
2
3
AREASEL1
AREASEL0
I
I
Destination setting pin
Destination setting pin
4
5
COL SW
BEEP
I
O
Illumination color select signal input
Beep signal output
6
7
CYRIL SEL
NOSE SW
I
I
Cyril select signal input
Front panel open/close detect signal input
8
9
DIAG
VOL ATT
I
O
Power AMP status signal input
Electronic volume attenuate control signal output
10
11
NCO
VSS
O
—
Not used. (Open)
Ground pin
12
13
TU ATT
NS MASK
O
O
Tuner mute control signal output
Noise mask signal output (GT200: AEP, UK model/GT200S only)
14
15
ILLUMI SEL1
ILLUMI SEL2
I
I
Illumination voltage setting signal input 1
Illumination voltage setting signal input 2
16 to 22
23
NCO
VCC5
O
—
Not used. (Open)
Power supply pin (+3.3 V)
24
25
EEP SIO
EEP CKO
I/O
O
EEPROM bus serial data input/output
EEPROM bus serial clock output
26
27
AMP STB
LCD CE
O
O
Power AMP satandby signal output
LCD driver chip enable signal output
28
29
LCD SO
LCD SCK
O
O
LCD driver serial data signal output
LCD driver serial clock signal output
30
31
RDS ON
RE IN0
O
I
RDS ON signal output
Rotary encoder signal input 0
32
33
RE IN1
I2C CKO
I
O
Rotary encoder signal input 1
I2C bus serial clock signal output
34
35
I2C SIO
DAVDD
I/O
—
I2C bus serial data signal input/output
A/D converter power supply pin (+3.3 V)
36
37
AVRH
DAVSS
—
—
A/D converter external reference power supply pin (+3.3 V)
Ground pin
38
39
QUALITY
VSM
I
I
Noise detect signal input
S-meter voltage detect signal input
40
41
KEY IN1
KEY IN0
I
I
Key signal input 1
Key signal input 0
42
43
VSS
RC IN0
—
I
Ground pin
Rotary commander key signal input
44 to 48
49
NCO
MD0
O
I
Not used. (open)
Operation mode setting pin (Connect to VDD.)
50
51
MD1
MD2
I
I
Operation mode setting pin (Connect to VDD.)
Operation mode setting pin (Connect to VSS.)
32
Pin Description
CDX-GT20W/GT200/GT200E/GT200S/GT250S
Pin No.
Pin Name
I/O
52
53
KEY ACK
TU ATT IN
I
I
Key acknowledgment detect signal input
Tuner mute zero cross detect signal input
Pin Description
54
55
BU IN
NCO
I
O
Back-up power supply detect signal input
Not used. (Open)
56
57
DAVN
NCO
I
O
RDS data block synchronized detect signal input
Not used. (Open)
58
59
UNISI
UNI SO
I
O
SONY bus data signal input
SONY bus data signal output
60
61
UNI SCK
611 SEL
O
I
SONY bus clock signal output
Mechanism deck select signal input
62
63
WMA
NCO
I
O
WMA select signal input
Not used. (Open)
64
65 to 67
SIRCS
NCO
I
O
Remote control signal input
Not used. (Open)
68
69, 70
FLASH W
NCO
I
O
Memory mode select signal input
Not used. (Open)
71
72
RC IN1
ACC IN
I
I
Rotary commander shift key signal input
Accessory power supply detect signal input
73
74
TEST IN
TEL ATT
I
I
Test mode detect signal input
Telephone attenuate detect signal input
75
76
NCO
XKEY ON
O
O
Not used. (Open)
A/D converter power supply control signal output
77
78
RESET
NCO
I
O
CPU reset signal input
Not used. (Open)
79
80
XOUT
XIN
O
I
Sub-clock output (32.768 kHz)
Sub-clock input (32.768 kHz)
81
82
VSS1
OSC IN
—
I
Ground pin
Main-clock input (3.68 MHz)
83
84
OSC OUT
VCC3
O
—
Main-clock output (3.68 MHz)
Power supply pin (+3.3 V)
85
86
DEMOSEL
ATT
I
O
DEMO select signal input
Audio mute control signal output
87
88
BUS ON
SYS RST
O
O
Bus on signal output
System reset signal output
89
90 to 92
EJECT OK SW
NCO
O
O
Eject OK signal output
Not used. (Open)
93
94 to 97
Z-MUTE
NCO
I
O
CD zero cross mute detect signal input
Not used. (Open)
98
99
CD ON
CDM ON
I
I
CD mechanism power control request signal input
CD mechanism deck power control request signal input
100
NCO
O
Not used. (Open)
33
CDX-GT20W/GT200/GT200E/GT200S/GT250S
SECTION 4
EXPLODED VIEWS
NOTE:
• The mechanical parts with no reference
number in the exploded views are not supplied.
• Items marked “*” are not stocked since
they are seldom required for routine service.
Some delay should be anticipated
when ordering these items.
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
• Color Indication of Appearance Parts
Example :
KNOB, BALANCE (WHITE) ... (RED)
R
R
Parts Color Cabinet’s Color
• Accessories are given in the last of this
parts list.
The components identified by
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
Les composants identifiés par une
marque 0 sont critiques pour
la sécurité.
Ne les remplacer que par une piéce
portant le numéro spécifié.
4-1. MAIN SECTION
A
MG-611WA-186//C
#2
#1
not supplied
A
8
B
FU601
5
#3
4
6
7
3
#1
TU1
not supplied
B
2
#1
not supplied
#1
1
Ref. No.
Part No.
Description
1
2
3
4
5
X-2067-566-1
2-583-939-01
X-2055-203-2
3-246-006-31
2-583-940-01
PANEL ASSY, SUB
SCREW (+B 2X4)
LOCK ASSY (S)
COVER
SCREW +BTT 2.6X5
6
6
6
A-1134-479-A MAIN BOARD, COMPLETE (US,CND)
A-1134-494-A MAIN BOARD, COMPLETE (GT250S)
A-1134-507-A MAIN BOARD, COMPLETE
(GT200:AEP,UK/GT200S)
A-1134-514-A MAIN BOARD, COMPLETE (GT200E)
6
34
Remark
Ref. No.
7
8
Part No.
Description
Remark
FU601
TU1
2-345-298-01 PLATE (TU), GROUND
1-776-206-21 CORD (WITH CONNECTOR) (POWER)
(EXCEPT AEP,UK)
1-776-527-61 CORD (WITH CONNECTOR) (ISO) (POWER)
(AEP,UK)
1-532-877-11 FUSE (BLADE TYPE) (AUTO FUSE) 10A
A-3220-961-A TUNER UNIT (TUX-032)
#1
#2
#3
7-685-792-09 SCREW +PTT 2.6X6 (S)
7-685-790-01 SCREW +PTT 2.6X4 (S)
7-685-793-09 SCREW +PTT 2.6X8 (S)
8
CDX-GT20W/GT200/GT200E/GT200S/GT250S
4-2. FRONT PANEL SECTION
63
60
63
RE901
58
61
LCD901
64
62
59
57
not supplied
56
not
supplied
not supplied
not supplied
not supplied
51
not supplied
not supplied
53
55
54
65
52
66
Ref. No.
51
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
51
51
51
52
X-2067-610-1 BUTTON ASSY (S)
(GT20W/GT200:US,CND/GT200E)
X-2067-611-1 BUTTON ASSY (S) (GT200:AEP,UK)
X-2067-612-1 BUTTON ASSY (S) (GT250S)
X-2102-533-1 BUTTON ASSY (S) (GT200S)
A-1134-211-A JACK BOARD, COMPLETE
60
60
60
60
61
A-1134-484-A KEY BOARD, COMPLETE (GT200:US,CND)
A-1134-490-A KEY BOARD, COMPLETE (GT20W)
A-1134-499-A KEY BOARD, COMPLETE
(GT200:AEP,UK/GT200S/GT250S)
A-1134-519-A KEY BOARD, COMPLETE (GT200E)
2-631-511-02 PANEL, FRONT BACK
53
54
54
54
54
2-631-526-01
A-1134-482-A
A-1134-488-A
A-1134-503-A
A-1134-510-A
PLATE (CD), LIGHT GUIDE
PANEL ASSY, FRONT (GT200:US,CND)
PANEL ASSY, FRONT (GT20W)
PANEL ASSY, FRONT (GT250S)
PANEL ASSY, FRONT (GT200:AEP,UK)
62
63
64
65
65
X-2024-133-3
3-250-543-91
3-040-315-01
X-2067-573-1
X-2067-574-1
CASE ASSY (for FRONT PANEL) (EXCEPT US)
SCREW (+B P-TITE M2)
COVER (AC OUT)
PANEL SUB ASSY, FRONT (GT200:US,CND)
PANEL SUB ASSY, FRONT (GT20W)
54
54
55
56
57
A-1134-516-A
A-1134-517-A
X-2102-730-1
2-349-626-01
1-780-199-11
PANEL ASSY, FRONT (GT200S)
PANEL ASSY, FRONT (GT200E)
KNOB (VOL) (SV) ASSY
SPRING (RELEASE)
CONDUCTIVE BOARD, CONNECTION
65
65
65
65
66
X-2067-575-1
X-2067-576-1
X-2067-577-1
X-2067-578-1
3-251-320-01
PANEL SUB ASSY, FRONT (GT200S)
PANEL SUB ASSY, FRONT (GT250S)
PANEL SUB ASSY, FRONT (GT200:AEP,UK)
PANEL SUB ASSY, FRONT (GT200E)
EMBLEM (NO. 2.5), SONY
58
59
2-634-438-01 ILLUMINATOR (LCD)
X-2067-569-1 HOLDER (LCD) ASSY
LCD901 1-805-919-11 DISPLAY PANEL, LIQUID CRYSTAL
(AEP,UK,E,MX)
LCD901 1-805-920-11 DISPLAY PANEL, LIQUID CRYSTAL (US,CND)
RE901 1-478-474-12 ENCODER, ROTARY (PUSH SELECT/VOLUME)
35
CDX-GT20W/GT200/GT200E/GT200S/GT250S
4-3. CD MECHANISM SECTION (1)
(MG-611WA-186//C)
not supplied
(SENSOR board)
101
not supplied
#4
not supplied
not supplied
not supplied
103
104
106
105
102
107
Ref. No.
101
102
103
104
36
Part No.
Description
A-1088-624-A
A-1132-415-A
2-345-865-11
2-345-865-01
CHASSIS (T) SUB ASSY
SERVO BOARD, COMPLETE
SPRING (DAMPER), COMPRESSION (BLACK)
SPRING (DAMPER), COMPRESSION
(NATURAL)
Remark
Ref. No.
105
106
107
#4
Part No.
Description
2-345-767-21
3-253-748-11
3-352-758-31
7-627-552-87
SPRING (KF60), TENSION
DAMPER (S)
SCREW (M1.7X2.5), TOOTHED LOCK
SCREW, PRECISION +P 1.7X2.2
Remark
CDX-GT20W/GT200/GT200E/GT200S/GT250S
4-4. CD MECHANISM SECTION (2)
(MG-611WA-186//C)
155
156
157
154
(including M901)
#5
M902
160
SW4
159
158
not supplied
153
not supplied
151
152
Ref. No.
Part No.
Description
151
152
0 153
154
155
A-1088-612-A
3-316-938-91
8-820-207-12
A-1088-615-A
A-1088-616-A
CHASSIS (OP) COMPLETE ASSY
SCREW (B1.4X5), TAPPING
OPTICAL PICK-UP (KSS1000E/K1RP)
CHASSIS (OP) SUB ASSY (including M901)
ARM SUB ASSY, CHUCKING
156
157
A-1088-613-A LEVER (SL) SUB ASSY
X-2024-784-3 LEVER (SL) ASSY
Remark
Ref. No.
Part No.
Description
158
159
160
M902
SW4
3-261-959-21
3-253-736-21
3-253-742-21
A-1088-614-A
1-786-339-11
SPRING (SL), TORSION
SPRING (CHKG), TENSION
WHEEL (SL), WORM
MOTOR ASSY, SL (SLED)
SWITCH (M) (LIMIT)
#5
7-627-850-77 SCREW, PRECISION +P 1.4X1.8
Remark
37
CDX-GT20W/GT200/GT200E/GT200S/GT250S
4-5. CD MECHANISM SECTION (3)
(MG-611WA-186//C)
203
201
202
207
211
204
209
208
210
205
207
207
M903
#4
206
Ref. No.
Part No.
Description
201
202
203
204
205
3-262-755-11
2-186-699-21
A-1088-618-A
3-259-455-21
3-253-713-21
WASHER (1.1-2.5)
GEAR (RA1)
ARM ASSY, ROLLER
SPRING (RAL)
SPRING (RAR)
206
207
3-259-469-21 SPRING (LE), LEAF
2-134-636-51 SCREW (M1.7X2.5)
38
Remark
Ref. No.
Part No.
Description
208
209
210
211
M903
2-186-696-21
3-345-648-91
A-1088-623-A
2-186-697-21
A-1088-622-A
BRACKET (LEM-N)
SCREW (M1.4), TOOTHED LOCK
GEAR (LE) ASSY
BEARING (LEB-N)
MOTOR ASSY, LE (LOADING)
#4
7-627-552-87 SCREW, PRECISION +P 1.7X2.2
Remark
CDX-GT20W/GT200/GT200E/GT200S/GT250S
4-6. CD MECHANISM SECTION (4)
(MG-611WA-186//C)
254
255
258
252
256
251
253
257
Ref. No.
251
252
253
254
Part No.
Description
2-186-700-21
3-344-223-01
3-259-470-23
3-253-755-21
GEAR (CHK1)
WASHER
GEAR (LE1)
LEVER (D)
Remark
Ref. No.
255
256
257
258
Part No.
Description
3-899-829-01
2-590-545-21
A-1088-620-A
3-262-755-11
WASHER (SLIT)
GEAR (LE2-M)
CHASSIS (M) BLOCK ASSY
WASHER (1.1-2.5)
Remark
39
CDX-GT20W/GT200/GT200E/GT200S/GT250S
SECTION 5
JACK KEY
ELECTRICAL PARTS LIST
NOTE:
• Due to standardization, replacements in
the parts list may be different from the
parts specified in the diagrams or the
components used on the set.
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
• RESISTORS
All resistors are in ohms.
METAL:Metal-film resistor.
METAL OXIDE: Metal oxide-film resistor.
F:nonflammable
• Items marked “*” are not stocked since
they are seldom required for routine service.
Some delay should be anticipated
when ordering these items.
• SEMICONDUCTORS
In each case, u : µ, for example:
uA.. : µA.. uPA.. : µPA..
uPB.. : µPB.. uPC..: µPC.. uPD.. : µPD..
• CAPACITORS
uF : µF
• COILS
uH : µH
The components identified by
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
Les composants identifiés par une
marque 0 sont critiques pour
la sécurité.
Ne les remplacer que par une piéce
portant le numéro spécifié.
When indicating parts by reference
number, please include the board.
Ref. No.
Part No.
Description
Remark
A-1134-211-A JACK BOARD, COMPLETE
*********************
Ref. No.
Part No.
Description
Remark
< DIODE >
< JACK >
J901
1-819-732-11 JACK (SMALL TYPE) (DIA. 3.5) (AUX)
*************************************************************
A-1134-484-A KEY BOARD, COMPLETE (GT200:US,CND)
A-1134-490-A KEY BOARD, COMPLETE (GT20W)
A-1134-499-A KEY BOARD, COMPLETE
(GT200:AEP,UK/GT200S/GT250S)
A-1134-519-A KEY BOARD, COMPLETE (GT200E)
********************
< CAPACITOR >
C921
C922
C971
C981
C983
1-163-031-11
1-163-031-11
1-107-826-11
1-107-826-11
1-107-826-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
0.01uF
0.1uF
0.1uF
0.1uF
10%
10%
10%
50V
50V
16V
16V
16V
C984
C985
C986
1-107-826-11 CERAMIC CHIP
1-131-664-11 CERAMIC CHIP
1-127-715-11 CERAMIC CHIP
0.1uF
0.15uF
0.22uF
10%
10%
10%
16V
10V
16V
LED932 6-501-339-01 LED NESW505CT-AST (LCD BACK LIGHT)
LED941 6-500-450-01 LED CL-195SR-CD-T (RING ILLUMINATION)
(GT200/GT200S/GT250S)
LED941 6-500-510-01 LED CL-195PG-CD-T (RING ILLUMINATION)
(GT20W/GT200E)
LED942 6-500-450-01 LED CL-195SR-CD-T (RING ILLUMINATION)
(GT200/GT200S/GT250S)
LED942 6-500-510-01 LED CL-195PG-CD-T (RING ILLUMINATION)
(GT20W/GT200E)
LED943 6-500-450-01 LED CL-195SR-CD-T (RING ILLUMINATION)
(GT200/GT200S/GT250S)
LED943 6-500-510-01 LED CL-195PG-CD-T (RING ILLUMINATION)
(GT20W/GT200E)
LED944 6-500-450-01 LED CL-195SR-CD-T (RING ILLUMINATION)
(GT200/GT200S/GT250S)
LED944 6-500-510-01 LED CL-195PG-CD-T (RING ILLUMINATION)
(GT20W/GT200E)
LED951 6-500-450-01 LED CL-195SR-CD-T (DISC SLOT)
(GT200/GT200S/GT250S)
LED951 6-500-510-01 LED CL-195PG-CD-T (DISC SLOT)
(GT20W/GT200E)
< SWITCH >
< CONNECTOR >
CN901
1-819-758-11 PLUG, CONNECTOR 15P
< DIODE >
D901
D903
D981
D982
6-500-886-01
6-501-180-01
6-501-167-01
6-501-193-01
DIODE
DIODE
DIODE
DIODE
RSA6.1ENTR
UDZW-TE17-18B
UDZW-TE17-5.1B
1SS355WTE-17
LSW901 1-786-805-11 SWITCH, TACTILE (WITH LED) (Z)
(GT200/GT200S/GT250S)
LSW901 1-786-806-11 SWITCH, TACTILE (WITH LED) (Z)
(GT20W/GT200E)
LSW902 1-786-805-11 SWITCH, TACTILE (WITH LED) (OFF)
(GT200/GT200S/GT250S)
LSW902 1-786-806-11 SWITCH, TACTILE (WITH LED) (OFF)
(GT20W/GT200E)
LSW903 1-786-805-11 SWITCH, TACTILE (WITH LED) (SOURCE)
(GT200/GT200S/GT250S)
< JUMPER RESISTOR >
FB901
FB902
FB903
1-216-864-11 SHORT CHIP
1-216-864-11 SHORT CHIP
1-216-295-11 SHORT CHIP
0
0
0
< IC >
IC901
IC971
40
6-707-063-01 IC LC75826WH-US-E
6-600-163-01 IC RS-770 (IR)
LSW903 1-786-806-11 SWITCH, TACTILE (WITH LED) (SOURCE)
(GT20W/GT200E)
LSW904 1-786-805-11 SWITCH, TACTILE (WITH LED) (GP/ALBM –)
(GT200/GT200S/GT250S)
LSW904 1-786-806-11 SWITCH, TACTILE (WITH LED) (GP/ALBM –)
(GT20W/GT200E)
LSW906 1-786-805-11 SWITCH, TACTILE (WITH LED) (GP/ALBM +)
(GT200/GT200S/GT250S)
CDX-GT20W/GT200/GT200E/GT200S/GT250S
KEY
Ref. No.
Part No.
Description
Remark
LSW906 1-786-806-11 SWITCH, TACTILE (WITH LED) (GP/ALBM +)
(GT20W/GT200E)
LSW907 1-786-805-11 SWITCH, TACTILE (WITH LED) (z/SCRL)
(GT200:US,CND/GT250S)
LSW907 1-786-805-11 SWITCH, TACTILE (WITH LED) (z/AF/TA)
(GT200:AEP,UK/GT200S)
LSW907 1-786-806-11 SWITCH, TACTILE (WITH LED) (z/SCRL)
(GT20W/GT200E)
LSW908 1-786-805-11 SWITCH, TACTILE (WITH LED) (EQ3)
(GT200/GT200S/GT250S)
LSW908 1-786-806-11 SWITCH, TACTILE (WITH LED) (EQ3)
(GT20W/GT200E)
LSW909 1-786-805-11 SWITCH, TACTILE (WITH LED)
(M > SEEK +) (GT200/GT200S/GT250S)
LSW909 1-786-806-11 SWITCH, TACTILE (WITH LED)
(M > SEEK +) (GT20W/GT200E)
LSW910 1-786-805-11 SWITCH, TACTILE (WITH LED)
(. m SEEK –) (GT200/GT200S/GT250S)
LSW910 1-786-806-11 SWITCH, TACTILE (WITH LED)
(. m SEEK –) (GT20W/GT200E)
LSW911 1-786-805-11 SWITCH, TACTILE (WITH LED) (BTM)
(GT200:US,CND/GT250S)
LSW911 1-786-805-11 SWITCH, TACTILE (WITH LED) (PTY)
(GT200:AEP,UK/GT200S)
LSW911 1-786-806-11 SWITCH, TACTILE (WITH LED) (BTM)
(GT20W/GT200E)
LSW912 1-786-805-11 SWITCH, TACTILE (WITH LED) (MODE)
(GT200/GT200S/GT250S)
LSW912 1-786-806-11 SWITCH, TACTILE (WITH LED) (MODE)
(GT20W/GT200E)
LSW913 1-786-805-11 SWITCH, TACTILE (WITH LED) (1)
(GT200/GT200S/GT250S)
LSW913 1-786-806-11 SWITCH, TACTILE (WITH LED) (1)
(GT20W/GT200E)
LSW914 1-786-805-11 SWITCH, TACTILE (WITH LED) (2)
(GT200/GT200S/GT250S)
LSW914 1-786-806-11 SWITCH, TACTILE (WITH LED) (2)
(GT20W/GT200E)
LSW915 1-786-805-11 SWITCH, TACTILE (WITH LED) (3/REP)
(GT200/GT200S/GT250S)
LSW915 1-786-806-11 SWITCH, TACTILE (WITH LED) (3/REP)
(GT20W/GT200E)
LSW916 1-786-805-11 SWITCH, TACTILE (WITH LED) (4/SHUF)
(GT200/GT200S/GT250S)
LSW916 1-786-806-11 SWITCH, TACTILE (WITH LED) (4/SHUF)
(GT20W/GT200E)
LSW917 1-786-805-11 SWITCH, TACTILE (WITH LED) (5)
(GT200/GT200S/GT250S)
LSW917 1-786-806-11 SWITCH, TACTILE (WITH LED) (5)
(GT20W/GT200E)
LSW918 1-786-805-11 SWITCH, TACTILE (WITH LED) (6/PAUSE)
(GT200/GT200S/GT250S)
LSW918 1-786-806-11 SWITCH, TACTILE (WITH LED) (6/PAUSE)
(GT20W/GT200E)
LSW919 1-786-805-11 SWITCH, TACTILE (WITH LED) (SENS)
(GT200:US,CND/GT250S)
LSW919 1-786-805-11 SWITCH, TACTILE (WITH LED) (SENS/BTM)
(GT200:AEP,UK/GT200S)
LSW919 1-786-806-11 SWITCH, TACTILE (WITH LED) (SENS)
(GT20W/GT200E)
LSW920 1-786-805-11 SWITCH, TACTILE (WITH LED) (DSPL/DIM)
(GT200/GT200S/GT250S)
Ref. No.
Part No.
Description
Remark
LSW920 1-786-806-11 SWITCH, TACTILE (WITH LED) (DSPL/DIM)
(GT20W/GT200E)
< TRANSISTOR >
Q931
Q932
8-729-027-44 TRANSISTOR DTC114TKA-T146
8-729-027-58 TRANSISTOR DTC143ZKA-T146
< RESISTOR >
R901
R902
R903
R904
R905
1-216-819-11
1-216-819-11
1-216-819-11
1-216-821-11
1-216-823-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
680
680
680
1K
1.5K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R906
R907
R908
R909
R910
1-216-819-11
1-216-819-11
1-216-819-11
1-216-821-11
1-216-823-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
680
680
680
1K
1.5K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R911
R912
R913
R914
R915
1-216-823-11
1-216-825-11
1-216-827-11
1-216-829-11
1-218-867-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1.5K
2.2K
3.3K
4.7K
6.8K
5%
5%
5%
5%
0.5%
1/10W
1/10W
1/10W
1/10W
1/10W
R916
R917
R918
R921
R922
1-216-833-11
1-216-835-11
1-216-837-11
1-216-025-11
1-216-025-11
METAL CHIP
METAL CHIP
METAL CHIP
RES-CHIP
RES-CHIP
10K
15K
22K
100
100
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R931
R932
R933
R934
R941
1-216-812-11
1-216-812-11
1-216-812-11
1-216-822-11
1-216-810-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
180
180
180
1.2K
120
5%
1/10W
5%
1/10W
5%
1/10W
5%
1/10W
5%
1/10W
(GT20W/GT200E)
R941
1-216-813-11 METAL CHIP
R942
1-216-810-11 METAL CHIP
R942
1-216-813-11 METAL CHIP
R944
R945
1-216-811-11 METAL CHIP
1-216-810-11 METAL CHIP
R945
1-216-812-11 METAL CHIP
R946
1-216-807-11 METAL CHIP
R946
1-216-809-11 METAL CHIP
R947
1-216-807-11 METAL CHIP
R947
1-216-809-11 METAL CHIP
R948
R949
1-216-811-11 METAL CHIP
1-216-810-11 METAL CHIP
R949
1-216-812-11 METAL CHIP
R950
1-216-807-11 METAL CHIP
220
5%
1/10W
(GT200/GT200S/GT250S)
120
5%
1/10W
(GT20W/GT200E)
220
5%
1/10W
(GT200/GT200S/GT250S)
150
5%
1/10W
120
5%
1/10W
(GT20W/GT200E)
180
5%
1/10W
(GT200/GT200S/GT250S)
68
5%
1/10W
(GT20W/GT200E)
100
5%
1/10W
(GT200/GT200S/GT250S)
68
5%
1/10W
(GT20W/GT200E)
100
5%
1/10W
(GT200/GT200S/GT250S)
150
120
5%
1/10W
5%
1/10W
(GT20W/GT200E)
180
5%
1/10W
(GT200/GT200S/GT250S)
68
5%
1/10W
(GT20W/GT200E)
41
CDX-GT20W/GT200/GT200E/GT200S/GT250S
KEY
Ref. No.
MAIN
Part No.
Description
R950
1-216-809-11 METAL CHIP
R951
1-216-807-11 METAL CHIP
R951
1-216-809-11 METAL CHIP
R952
1-216-810-11 METAL CHIP
R952
1-216-811-11 METAL CHIP
R953
R954
1-216-811-11 METAL CHIP
1-216-810-11 METAL CHIP
R954
1-216-811-11 METAL CHIP
R955
R956
1-216-811-11 METAL CHIP
1-216-810-11 METAL CHIP
Remark
5%
1/10W
5%
1/10W
(GT20W/GT200E)
150
5%
1/10W
(GT200/GT200S/GT250S)
150
5%
1/10W
120
5%
1/10W
(GT20W/GT200E)
Part No.
7-621-284-40
7-685-134-19
7-685-793-09
7-685-795-09
150
120
1-216-812-11 METAL CHIP
180
R957
R958
1-216-811-11 METAL CHIP
1-216-810-11 METAL CHIP
R958
1-216-812-11 METAL CHIP
R959
1-216-811-11 METAL CHIP
5%
1/10W
(GT200/GT200S/GT250S)
150
5%
1/10W
120
5%
1/10W
(GT20W/GT200E)
180
5%
1/10W
(GT200/GT200S/GT250S)
150
5%
1/10W
R960
1-216-810-11 METAL CHIP
120
R960
1-216-812-11 METAL CHIP
R961
R962
1-216-811-11 METAL CHIP
1-216-810-11 METAL CHIP
R962
1-216-812-11 METAL CHIP
R963
R964
1-216-811-11 METAL CHIP
1-216-810-11 METAL CHIP
R964
1-216-812-11 METAL CHIP
R972
R974
1-216-809-11 METAL CHIP
1-216-864-11 SHORT CHIP
5%
1/10W
5%
1/10W
(GT20W/GT200E)
180
5%
1/10W
(GT200/GT200S/GT250S)
100
5%
1/10W
0
R976
R977
R978
R979
R981
1-216-864-11
1-216-809-11
1-216-809-11
1-216-809-11
1-216-811-11
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
100
100
100
150
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
R982
R984
R985
R986
R987
1-216-811-11
1-216-821-11
1-216-821-11
1-216-821-11
1-216-857-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
150
1K
1K
1K
1M
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
5%
1/10W
(GT20W/GT200E)
180
5%
1/10W
(GT200/GT200S/GT250S)
150
5%
1/10W
120
5%
1/10W
(GT20W/GT200E)
180
5%
1/10W
(GT200/GT200S/GT250S)
Description
SCREW +P 2.6X10
SCREW +P 2.6X8 TYPE2 NON-SLIT
SCREW +PTT 2.6X8 (S)
SCREW +PTT 2.6X12 (S)
< CAPACITOR >
C1
1-162-964-11 CERAMIC CHIP
C2
1-162-964-11 CERAMIC CHIP
C3
1-126-963-11 ELECT
C4
C5
1-126-947-11 ELECT
1-126-947-11 ELECT
C6
C7
C12
C13
C51
1-162-970-11
1-162-970-11
1-162-970-11
1-162-970-11
1-126-947-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
0.01uF
10%
25V
0.01uF
10%
25V
0.01uF
10%
25V
0.01uF
10%
25V
47uF
20%
35V
(GT200:AEP,UK/GT200S)
C53
1-107-826-11 CERAMIC CHIP
C54
1-107-826-11 CERAMIC CHIP
C55
1-107-826-11 CERAMIC CHIP
C56
1-107-826-11 CERAMIC CHIP
C57
1-107-826-11 CERAMIC CHIP
0.1uF
10%
16V
(GT200:AEP,UK/GT200S)
0.1uF
10%
16V
(GT200:AEP,UK/GT200S)
0.1uF
10%
16V
(GT200:AEP,UK/GT200S)
0.1uF
10%
16V
(GT200:AEP,UK/GT200S)
0.1uF
10%
16V
(GT200:AEP,UK/GT200S)
C58
1-107-826-11 CERAMIC CHIP
C59
1-164-237-11 CERAMIC CHIP
C60
1-162-916-11 CERAMIC CHIP
C62
1-162-959-11 CERAMIC CHIP
C301
1-128-551-11 ELECT
0.1uF
10%
16V
(GT200:AEP,UK/GT200S)
16PF
5%
50V
(GT200:AEP,UK/GT200S)
12PF
5%
50V
(GT200:AEP,UK/GT200S)
330PF
5%
50V
(GT200:AEP,UK/GT200S)
22uF
20%
63V
C302
C305
C306
C308
C309
1-104-665-11
1-104-665-11
1-162-970-11
1-162-970-11
1-162-966-11
ELECT
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
100uF
100uF
0.01uF
0.01uF
0.0022uF
20%
20%
10%
10%
10%
25V
25V
25V
25V
50V
C310
C312
C343
C401
C404
1-162-966-11
1-162-970-11
1-162-970-11
1-126-964-11
1-127-715-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
CERAMIC CHIP
0.0022uF
0.01uF
0.01uF
10uF
0.22uF
10%
10%
10%
20%
10%
50V
25V
25V
50V
16V
C405
C406
C407
C410
C411
1-127-715-11
1-126-960-11
1-126-960-11
1-162-923-11
1-162-923-11
CERAMIC CHIP
ELECT
ELECT
CERAMIC CHIP
CERAMIC CHIP
0.22uF
1uF
1uF
47PF
47PF
10%
20%
20%
5%
5%
16V
50V
50V
50V
50V
150
120
R991
1-216-864-11 SHORT CHIP
0
*************************************************************
Remark
A-1134-479-A MAIN BOARD, COMPLETE (US,CND)
A-1134-494-A MAIN BOARD, COMPLETE (GT250S)
A-1134-507-A MAIN BOARD, COMPLETE
(GT200:AEP,UK/GT200S)
A-1134-514-A MAIN BOARD, COMPLETE (GT200E)
*********************
5%
1/10W
(GT200/GT200S/GT250S)
68
5%
1/10W
(GT20W/GT200E)
100
5%
1/10W
(GT200/GT200S/GT250S)
120
5%
1/10W
(GT20W/GT200E)
150
5%
1/10W
(GT200/GT200S/GT250S)
R956
42
Ref. No.
100
0.001uF 10%
50V
(GT200:AEP,UK/GT200S)
0.001uF 10%
50V
(GT200:AEP,UK/GT200S)
4.7uF
20%
50V
(GT200:AEP,UK/GT200S)
47uF
20%
35V
47uF
20%
35V
CDX-GT20W/GT200/GT200E/GT200S/GT250S
MAIN
Ref. No.
Part No.
Description
Part No.
Description
C412
C413
C431
C432
C435
1-126-934-11
1-162-970-11
1-126-964-11
1-165-908-11
1-165-908-11
ELECT
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
220uF
0.01uF
10uF
1uF
1uF
20%
10%
20%
10%
10%
16V
25V
50V
10V
10V
Remark
C776
C901
C902
C903
C905
1-162-964-11
1-109-982-11
1-109-982-11
1-126-961-11
1-162-970-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
CERAMIC CHIP
C441
C442
C445
C451
C452
1-126-964-11
1-165-908-11
1-165-908-11
1-126-964-11
1-165-908-11
ELECT
CERAMIC CHIP
CERAMIC CHIP
ELECT
CERAMIC CHIP
10uF
1uF
1uF
10uF
1uF
20%
10%
10%
20%
10%
50V
10V
10V
50V
10V
C917
C918
1-163-017-00 CERAMIC CHIP
1-163-017-00 CERAMIC CHIP
C455
C461
C462
C465
C471
1-165-908-11
1-126-964-11
1-165-908-11
1-165-908-11
1-126-964-11
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
ELECT
1uF
10uF
1uF
1uF
10uF
10%
20%
10%
10%
20%
10V
50V
10V
10V
50V
C474
C479
C481
C484
C501
1-163-251-11
1-126-947-11
1-126-964-11
1-163-251-11
1-162-970-11
CERAMIC CHIP
ELECT
ELECT
CERAMIC CHIP
CERAMIC CHIP
100PF
47uF
10uF
100PF
0.01uF
5%
20%
20%
5%
10%
50V
35V
50V
50V
25V
C502
C503
C504
C507
C508
1-162-964-11
1-104-665-11
1-162-970-11
1-162-917-11
1-162-917-11
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.001uF
100uF
0.01uF
15PF
15PF
10%
20%
10%
5%
5%
50V
25V
25V
50V
50V
C509
C510
C511
C512
C513
1-162-966-11
1-162-970-11
1-104-665-11
1-162-964-11
1-162-964-11
CERAMIC CHIP
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
0.0022uF
0.01uF
100uF
0.001uF
0.001uF
10%
10%
20%
10%
10%
50V
25V
25V
50V
50V
C514
C516
1-162-964-11 CERAMIC CHIP
1-162-964-11 CERAMIC CHIP
C519
C601
0.001uF 10%
50V
0.001uF 10%
50V
(GT200:AEP,UK/GT200S)
1-216-864-11 SHORT CHIP
0
(GT20W/GT200:US,CND/GT200E/GT250S)
1-107-826-11 CERAMIC CHIP 0.1uF
10%
16V
1-131-868-81 ELECT
3300uF
20%
16V
C602
C617
C618
C622
C623
1-165-319-11
1-163-009-11
1-163-009-11
1-126-916-11
1-126-916-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
ELECT
0.1uF
0.001uF
0.001uF
1000uF
1000uF
10%
10%
20%
20%
50V
50V
50V
6.3V
6.3V
C631
C750
C751
C753
C754
1-126-960-11
1-115-340-11
1-115-340-11
1-128-551-11
1-126-961-11
ELECT
CERAMIC CHIP
CERAMIC CHIP
ELECT
ELECT
1uF
0.22uF
0.22uF
22uF
2.2uF
20%
10%
10%
20%
20%
50V
25V
25V
63V
50V
C755
C756
C758
C763
C764
1-162-964-11
1-127-715-11
1-126-964-11
1-127-715-11
1-115-340-11
CERAMIC CHIP
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
0.001uF
0.22uF
10uF
0.22uF
0.22uF
10%
10%
20%
10%
10%
50V
16V
50V
16V
25V
C765
C769
C770
C771
C774
1-115-340-11
1-127-715-11
1-127-715-11
1-127-715-11
1-115-340-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.22uF
0.22uF
0.22uF
0.22uF
0.22uF
10%
10%
10%
10%
10%
25V
16V
16V
16V
25V
C775
1-115-340-11 CERAMIC CHIP
0.22uF
10%
25V
C516
Ref. No.
Remark
0.001uF
1uF
1uF
2.2uF
0.01uF
10%
10%
10%
20%
10%
50V
10V
10V
50V
25V
0.0047uF 10%
0.0047uF 10%
50V
50V
< CONNECTOR >
CN601 1-774-701-21 PIN, CONNECTOR 16P
CN701 1-819-773-11 SOCKET, CONNECTOR 15P
CNP301 1-817-536-11 CONNECTOR, BOARD TO BOARD 28P
< DIODE >
D1
D479
D502
D503
D510
6-501-168-01
6-501-193-01
8-719-060-48
6-501-193-01
6-501-013-01
DIODE
DIODE
DIODE
DIODE
DIODE
UDZW-TE17-5.6B
1SS355WTE-17
RB751V-40TE-17
1SS355WTE-17
BAT54ALT1G
D511
D512
D580
D581
D601
6-500-335-01
6-501-051-01
6-501-171-01
6-501-180-01
8-719-049-38
DIODE
DIODE
DIODE
DIODE
DIODE
MC2838-T112-1
BAT54CLT1G
UDZW-TE17-7.5B
UDZW-TE17-18B
1N5404TU
D609
D617
D651
D719
D751
6-501-170-01
6-501-180-01
6-501-180-01
6-501-180-01
6-500-522-01
DIODE
DIODE
DIODE
DIODE
DIODE
UDZW-TE17-6.8B
UDZW-TE17-18B
UDZW-TE17-18B (AEP,UK)
UDZW-TE17-18B
10EDB40-TA1B2
D752
D753
D754
D755
D756
6-500-522-01
6-500-522-01
6-500-522-01
6-500-522-01
6-500-522-01
DIODE
DIODE
DIODE
DIODE
DIODE
10EDB40-TA1B2
10EDB40-TA1B2
10EDB40-TA1B2
10EDB40-TA1B2
10EDB40-TA1B2
D757
D758
D759
D760
D761
6-500-522-01
6-500-522-01
6-500-522-01
6-500-522-01
6-500-522-01
DIODE
DIODE
DIODE
DIODE
DIODE
10EDB40-TA1B2
10EDB40-TA1B2
10EDB40-TA1B2
10EDB40-TA1B2
10EDB40-TA1B2
D762
D903
6-500-522-01 DIODE 10EDB40-TA1B2
6-501-170-01 DIODE UDZW-TE17-6.8B
< FERRITE BEAD >
FB1
FB302
FB303
FB304
FB305
1-500-245-11
1-216-864-11
1-216-864-11
1-216-295-11
1-216-295-11
INDUCTOR, FERRITE BEAD
SHORT CHIP
0
SHORT CHIP
0
SHORT CHIP
0
SHORT CHIP
0
FB307
FB308
FB309
FB310
FB410
1-216-864-11
1-216-295-11
1-216-864-11
1-216-864-11
1-216-864-11
SHORT CHIP
0
SHORT CHIP
0
SHORT CHIP
0
SHORT CHIP
0
SHORT CHIP
0
(GT20W/GT200:US,CND/GT200E/GT250S)
FB410
1-414-595-11 INDUCTOR, FERRITE BEAD
(GT200:AEP,UK/GT200S)
1-216-864-11 SHORT CHIP
0
(GT20W/GT200:US,CND/GT200E/GT250S)
FB411
43
CDX-GT20W/GT200/GT200E/GT200S/GT250S
MAIN
Ref. No.
FB411
Part No.
Description
Remark
FB501
FB603
FB604
FB605
1-414-595-11 INDUCTOR, FERRITE BEAD
(GT200:AEP,UK/GT200S)
1-216-295-11 SHORT CHIP
0
1-216-295-11 SHORT CHIP
0
1-500-245-11 INDUCTOR, FERRITE BEAD
1-216-864-11 SHORT CHIP
0
FB606
1-216-864-11 SHORT CHIP
Ref. No.
Part No.
Description
Q580
Q581
Q582
Q631
Q651
8-729-027-43
1-801-806-11
8-729-120-28
8-729-120-28
8-729-120-28
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
Remark
Q664
8-729-027-23 TRANSISTOR DTA114EKA-T146
DTC114EKA-T146
DTC144EKA
2SC1623-L5L6
2SC1623-L5L6
2SC1623-L5L6 (AEP,UK)
0
< RESISTOR >
< FUSE >
FU601
1-532-877-11 FUSE (BLADE TYPE) (AUTO FUSE) 10A
< IC >
IC51
IC401
IC501
IC602
IC750
6-803-747-01
6-708-880-01
6-806-031-01
8-759-659-13
6-705-360-02
IC
IC
IC
IC
IC
TDA7333013TR (GT200:AEP,UK/GT200S)
BD3806AFS-E2
MB90487APF-G-155E1
PST3428UL
TDA8588BJ/N2/R1
IC901
8-759-681-42 IC NJM12902V(TE2)
R1
R2
R3
R4
R5
1-216-821-11
1-414-595-11
1-414-595-11
1-216-839-11
1-216-843-11
R6
1-216-839-11 METAL CHIP
R7
1-216-843-11
R8
1-216-839-11
R9
1-216-843-11
R12
1-414-595-11
R13
R29
1-414-595-11 INDUCTOR, FERRITE BEAD
1-216-809-11 METAL CHIP
100
5%
1/10W
(GT200:AEP,UK/GT200S)
1-216-797-11 METAL CHIP
10
5%
1/10W
(GT200:AEP,UK/GT200S)
1-216-803-11 METAL CHIP
33
5%
1/10W
(GT200:AEP,UK/GT200S)
1-414-595-11 INDUCTOR, FERRITE BEAD
(GT200:AEP,UK/GT200S)
< JACK >
J1
J330
1-815-185-13 JACK (ANTENNA)
1-774-698-11 JACK, PIN 2P (AUDIO OUT REAR)
< JUMPER RESISTOR >
R51
JC1
JC501
JC504
JC527
JC533
1-216-864-11
1-216-864-11
1-216-864-11
1-216-821-11
1-216-864-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
SHORT CHIP
0
0
0
1K
0
JC681
JC753
JC754
JC755
JC756
1-216-864-11
1-216-296-11
1-216-296-11
1-216-296-11
1-216-864-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
0
0
0
0
0
JC795
1-216-864-11 SHORT CHIP
0
R52
5%
1/10W
R53
1-469-844-11
1-216-295-11
1-216-295-11
1-216-295-11
1-456-617-11
INDUCTOR
SHORT CHIP
SHORT CHIP
SHORT CHIP
COIL, CHOKE
2.2uH
0 (GT200:AEP,UK/GT200S)
0
0
< TRANSISTOR >
Q1
Q22
Q431
Q441
6-551-431-01 TRANSISTOR 2SC6027T100
1-801-806-11 TRANSISTOR DTC144EKA
(GT200:AEP,UK/GT200S)
8-729-600-22 TRANSISTOR 2SA1235-F
(GT200:AEP,UK/GT200S)
8-729-027-44 TRANSISTOR DTC114TKA-T146
8-729-027-44 TRANSISTOR DTC114TKA-T146
Q451
Q461
Q471
Q478
Q479
8-729-027-44
8-729-027-44
6-551-392-01
1-801-806-11
8-729-027-23
Q481
6-551-392-01 TRANSISTOR RT6N140C-TP-1
Q51
44
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
DTC114TKA-T146
DTC114TKA-T146
RT6N140C-TP-1
DTC144EKA
DTA114EKA-T146
5%
1/10W
5%
5%
1/10W
1/10W
33K
5%
1/10W
(GT200:AEP,UK/GT200S)
METAL CHIP
68K
5%
1/10W
(GT200:AEP,UK/GT200S)
METAL CHIP
33K
5%
1/10W
(GT200:AEP,UK/GT200S)
METAL CHIP
68K
5%
1/10W
(GT200:AEP,UK/GT200S)
INDUCTOR, FERRITE BEAD
R54
1-216-833-11 METAL CHIP
R55
R56
1-216-864-11
1-414-595-11
R57
1-414-595-11
R58
1-216-833-11
R59
1-216-845-11 METAL CHIP
R60
1-216-833-11 METAL CHIP
R61
1-216-821-11 METAL CHIP
R301
R302
1-216-821-11 METAL CHIP
1-216-821-11 METAL CHIP
100K
5%
1/10W
(GT200:AEP,UK/GT200S)
10K
5%
1/10W
(GT200:AEP,UK/GT200S)
1K
5%
1/10W
(GT200:AEP,UK/GT200S)
1K
5%
1/10W
1K
5%
1/10W
R401
R405
R406
R407
R408
1-216-797-11
1-218-881-11
1-216-809-11
1-216-809-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10
27K
100
100
100
5%
0.5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R409
R410
R411
R431
R432
1-216-809-11
1-216-809-11
1-216-809-11
1-216-821-11
1-216-841-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100
1K
47K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R441
R442
1-216-821-11 METAL CHIP
1-216-841-11 METAL CHIP
1K
47K
5%
5%
1/10W
1/10W
< COIL >
L1
L51
L301
L501
L601
METAL CHIP
1K
INDUCTOR, FERRITE BEAD
INDUCTOR, FERRITE BEAD
METAL CHIP
33K
METAL CHIP
68K
10K
5%
1/10W
(GT200:AEP,UK/GT200S)
SHORT CHIP
0 (GT200:AEP,UK/GT200S)
INDUCTOR, FERRITE BEAD
(GT200:AEP,UK/GT200S)
INDUCTOR, FERRITE BEAD
(GT200:AEP,UK/GT200S)
METAL CHIP
10K
5%
1/10W
(GT200:AEP,UK/GT200S)
CDX-GT20W/GT200/GT200E/GT200S/GT250S
MAIN
Ref. No.
Part No.
Description
R451
R452
R461
R462
R471
1-216-821-11
1-216-841-11
1-216-821-11
1-216-841-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1K
47K
1K
47K
100
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R472
R479
R481
R482
R502
1-216-841-11
1-216-805-11
1-216-809-11
1-216-841-11
1-216-821-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
47K
47
100
47K
1K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R503
R504
R505
R506
1-216-821-11
1-218-871-11
1-218-871-11
1-216-845-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
R507
Remark
1K
5%
1/10W
10K
0.5% 1/10W
10K
0.5% 1/10W
100K
5%
1/10W
(GT20W/GT200/GT200S/GT250S)
1-216-845-11 METAL CHIP
100K
5%
1/10W
(EXCEPT AEP,UK)
R508
R509
R510
R511
R512
1-216-864-11
1-216-812-11
1-216-821-11
1-216-821-11
1-216-821-11
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
180
1K
1K
1K
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
R513
R514
R517
R518
R519
1-216-845-11
1-216-845-11
1-216-841-11
1-216-825-11
1-216-845-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
100K
47K
2.2K
100K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R520
1-216-845-11 METAL CHIP
100K
5%
R521
R522
R528
R529
1-216-825-11
1-216-825-11
1-216-845-11
1-216-821-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
2.2K
2.2K
100K
1K
5%
5%
5%
5%
1/10W
(GT200E)
1/10W
1/10W
1/10W
1/10W
R531
R532
R533
R534
R535
1-216-845-11
1-216-845-11
1-216-845-11
1-216-833-11
1-216-833-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
100K
100K
10K
10K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R536
R537
1-216-845-11 METAL CHIP
1-216-845-11 METAL CHIP
100K
100K
R538
1-216-845-11 METAL CHIP
100K
R539
R540
1-216-821-11 METAL CHIP
1-216-845-11 METAL CHIP
1K
100K
5%
1/10W
5%
1/10W
(AEP,UK,E,MX)
5%
1/10W
(US,CND)
5%
1/10W
5%
1/10W
R541
R542
R543
R544
R545
1-216-845-11
1-216-821-11
1-216-821-11
1-216-821-11
1-216-845-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
1K
1K
1K
100K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
(GT250S)
R546
1-216-845-11 METAL CHIP
100K
5%
1/10W
(GT250S)
R547
R549
1-216-864-11 SHORT CHIP
1-216-845-11 METAL CHIP
0
100K
5%
R550
R551
1-216-845-11 METAL CHIP
1-216-845-11 METAL CHIP
1/10W
(GT200E)
100K
5%
1/10W
100K
5%
1/10W
(GT20W/GT200/GT200S)
Ref. No.
Part No.
Description
R556
1-216-833-11 METAL CHIP
R557
R558
1-216-809-11
1-216-821-11
R561
R563
1-216-845-11
1-216-845-11
R564
1-216-845-11 METAL CHIP
R565
R566
R567
R568
1-216-845-11
1-216-845-11
1-216-845-11
1-216-821-11
R570
R573
Remark
10K
5%
1/10W
(EXCEPT AEP,UK)
METAL CHIP
100
5%
1/10W
METAL CHIP
1K
5%
1/10W
(GT20W/GT200:US,CND/GT200E/GT250S)
METAL CHIP
100K
5%
1/10W
METAL CHIP
100K
5%
1/10W
100K
5%
1/10W
(AEP,UK)
METAL CHIP
100K
5%
1/10W
METAL CHIP
100K
5%
1/10W
METAL CHIP
100K
5%
1/10W
METAL CHIP
1K
5%
1/10W
(GT20W/GT200:US,CND/GT200E/GT250S)
1-216-817-11 METAL CHIP
1-216-845-11 METAL CHIP
470
100K
5%
5%
R575
R577
R578
1-216-845-11 METAL CHIP
1-216-845-11 METAL CHIP
1-216-821-11 METAL CHIP
100K
100K
1K
5%
5%
5%
1/10W
1/10W
(AEP,UK)
1/10W
1/10W
1/10W
R582
R583
R584
R585
R601
1-216-821-11
1-216-821-11
1-216-841-11
1-216-849-11
1-216-845-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1K
1K
47K
220K
100K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R609
R631
R632
R633
R634
1-216-821-11
1-249-425-11
1-216-841-11
1-216-841-11
1-216-829-11
METAL CHIP
CARBON
METAL CHIP
METAL CHIP
METAL CHIP
1K
4.7K
47K
47K
4.7K
5%
5%
5%
5%
5%
1/10W
1/4W
1/10W
1/10W
1/10W
R636
R651
1-216-845-11 METAL CHIP
1-216-821-11 METAL CHIP
100K
1K
5%
5%
R652
1-216-841-11 METAL CHIP
47K
5%
R653
1-216-833-11 METAL CHIP
10K
5%
R654
1-216-833-11 METAL CHIP
10K
5%
1/10W
1/10W
(AEP,UK)
1/10W
(AEP,UK)
1/10W
(AEP,UK)
1/10W
(AEP,UK)
R661
R662
R663
R664
R671
1-216-821-11
1-216-845-11
1-216-821-11
1-216-845-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1K
100K
1K
100K
100
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R672
R673
R674
R675
R676
1-216-809-11
1-216-833-11
1-216-845-11
1-216-821-11
1-216-821-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
10K
100K
1K
1K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R677
R679
R681
R691
R692
1-216-821-11
1-216-821-11
1-216-864-11
1-216-845-11
1-216-845-11
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
1K
1K
0
100K
100K
5%
5%
1/10W
1/10W
5%
5%
1/10W
1/10W
R694
1-216-821-11 METAL CHIP
R752
R756
R757
R901
1-216-811-11
1-216-841-11
1-216-864-11
1-216-817-11
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
1K
5%
1/10W
(GT200:AEP,UK/GT200S)
150
5%
1/10W
47K
5%
1/10W
0
470
5%
1/10W
45
CDX-GT20W/GT200/GT200E/GT200S/GT250S
MAIN
Ref. No.
SENSOR
SERVO
Part No.
Description
Remark
Ref. No.
Part No.
Description
R902
R903
R904
R905
R906
1-216-817-11
1-216-834-11
1-216-834-11
1-216-841-11
1-216-841-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
470
12K
12K
47K
47K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
C32
C33
C36
C39
C40
1-125-777-11
1-125-777-11
1-125-777-11
1-126-208-21
1-126-395-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
ELECT CHIP
0.1uF
0.1uF
0.1uF
47uF
22uF
10%
10%
10%
20%
20%
10V
10V
10V
4V
16V
R907
R910
R911
R912
R913
1-216-845-11
1-216-789-11
1-216-825-11
1-216-864-11
1-216-864-11
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
SHORT CHIP
100K
2.2
2.2K
0
0
5%
5%
5%
1/10W
1/10W
1/10W
C41
C42
C43
C44
C45
1-125-777-11
1-125-777-11
1-100-567-81
1-125-777-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.01uF
0.1uF
0.1uF
10%
10%
10%
10%
10%
10V
10V
25V
10V
10V
R914
1-216-825-11 METAL CHIP
2.2K
5%
1/10W
C46
C47
C48
C49
C50
1-162-923-11
1-164-245-11
1-100-567-81
1-125-777-11
1-100-567-81
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
47PF
0.015uF
0.01uF
0.1uF
0.01uF
5%
10%
10%
10%
10%
50V
25V
25V
10V
25V
C51
C52
C53
C54
C55
1-125-777-11
1-125-777-11
1-125-777-11
1-100-567-81
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.1uF
0.01uF
0.1uF
10%
10%
10%
10%
10%
10V
10V
10V
25V
10V
C56
C58
C60
C62
C66
1-164-245-11
1-125-777-11
1-162-964-11
1-125-777-11
1-100-567-81
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.015uF
0.1uF
0.001uF
0.1uF
0.01uF
10%
10%
10%
10%
10%
25V
10V
50V
10V
25V
C67
C68
C69
C70
C71
1-100-567-81
1-100-567-81
1-100-567-81
1-125-777-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
0.01uF
0.01uF
0.1uF
0.1uF
10%
10%
10%
10%
10%
25V
25V
25V
10V
10V
C72
C80
C132
C133
1-125-777-11
1-125-837-11
1-125-837-11
1-125-837-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
1uF
1uF
1uF
10%
10%
10%
10%
10V
6.3V
6.3V
6.3V
< SWITCH >
S502
S702
1-571-478-11 SWITCH, SLIDE (FREQUENCY SELECTOR)
(GT250S)
1-786-826-11 SWITCH, TACTILE (RESET)
< TUNER UNIT >
TU1
A-3220-961-A TUNER UNIT (TUX-032)
< VIBRATOR >
X51
1-813-173-11 VIBRATOR, CRYSTAL (8.664MHz)
(GT200:AEP,UK/GT200S)
X501
1-813-524-21 VIBRATOR, CERAMIC (18.432MHz)
X502
1-813-202-11 VIBRATOR, CRYSTAL (32.768kHz)
*************************************************************
SENSOR BOARD
**************
Remark
< SWITCH >
SW2
1-529-566-61 SWITCH, PUSH (1 KEY) (SELF)
SW3
1-529-566-61 SWITCH, PUSH (1 KEY) (DISC IN)
*************************************************************
A-1132-415-A SERVO BOARD, COMPLETE
**********************
< CONNECTOR >
CN1
CN2
< CAPACITOR >
C7
C10
C11
C12
C13
1-125-777-11
1-126-208-21
1-125-777-11
1-125-777-11
1-100-567-81
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
47uF
0.1uF
0.1uF
0.01uF
10%
20%
10%
10%
10%
10V
4V
10V
10V
25V
C14
C15
C16
C17
C18
1-104-609-11
1-125-777-11
1-162-964-11
1-125-777-11
1-125-777-11
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
100uF
0.1uF
0.001uF
0.1uF
0.1uF
20%
10%
10%
10%
10%
4V
10V
50V
10V
10V
C19
C20
C22
C23
C24
1-125-777-11
1-164-677-11
1-164-677-11
1-125-777-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.033uF
0.033uF
0.1uF
0.1uF
10%
10%
10%
10%
10%
10V
16V
16V
10V
10V
C25
C26
C29
C30
C31
1-125-777-11
1-162-966-11
1-162-968-11
1-162-968-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.0022uF
0.0047uF
0.0047uF
0.1uF
10%
10%
10%
10%
10%
10V
50V
50V
50V
10V
46
1-691-380-21 CONNECTOR, FFC/FPC 16P
1-817-275-21 CONNECTOR, BOARD TO BOARD 28P
< JUMPER RESISTOR >
FB2
FB3
FB4
1-216-864-11 SHORT CHIP
1-216-864-11 SHORT CHIP
1-216-864-11 SHORT CHIP
0
0
0
< IC >
IC1
IC2
IC3
IC6
6-707-327-01
6-708-729-01
6-806-019-01
6-708-728-01
IC
IC
IC
IC
BA5968FP-E2
TC94A70FG-002
MB90486BPFV-G-158E1
BH15LB1WG
< TRANSISTOR >
Q2
Q3
Q21
6-551-120-01 TRANSISTOR 2SA2119K
8-729-928-90 TRANSISTOR DTC114EE
8-729-904-87 TRANSISTOR 2SB1197K-R
< RESISTOR >
R1
R2
1-218-965-11 RES-CHIP
1-218-977-11 RES-CHIP
10K
100K
5%
5%
1/16W
1/16W
CDX-GT20W/GT200/GT200E/GT200S/GT250S
SERVO
Ref. No.
Part No.
Description
R5
R6
R7
R8
R9
1-218-969-11
1-218-969-11
1-218-990-81
1-218-965-11
1-218-965-11
RES-CHIP
RES-CHIP
SHORT CHIP
RES-CHIP
RES-CHIP
22K
22K
0
10K
10K
Remark
Ref. No.
Part No.
Description
5%
5%
1/16W
1/16W
5%
5%
1/16W
1/16W
R73
R74
R75
R77
R78
1-218-973-11
1-218-941-81
1-218-941-81
1-218-973-11
1-218-941-81
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
47K
100
100
47K
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R10
R11
R12
R13
R14
1-218-990-81
1-218-941-81
1-218-969-11
1-218-969-11
1-218-929-11
SHORT CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
0
100
22K
22K
10
R15
R16
R17
R18
R19
1-218-929-11
1-218-953-11
1-218-990-81
1-218-941-81
1-218-935-11
RES-CHIP
RES-CHIP
SHORT CHIP
RES-CHIP
RES-CHIP
R20
R21
R22
R23
R24
1-162-961-11
1-218-941-81
1-218-977-11
1-218-977-11
1-218-977-11
R25
R26
R27
R28
R29
Remark
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
R79
R80
R81
R82
R83
1-218-941-81
1-218-941-81
1-218-941-81
1-218-941-81
1-218-977-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
100
100
100
100
100K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
10
1K
0
100
33
5%
5%
1/16W
1/16W
5%
5%
1/16W
1/16W
R84
R85
R86
R87
R96
1-218-941-81
1-218-977-11
1-218-941-81
1-218-977-11
1-218-941-81
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
100
100K
100
100K
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
CERAMIC CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
330PF
100
100K
100K
100K
10%
5%
5%
5%
5%
50V
1/16W
1/16W
1/16W
1/16W
R97
R98
R132
R133
R141
1-220-200-81
1-218-971-11
1-218-969-11
1-218-953-11
1-216-864-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
SHORT CHIP
30K
33K
22K
1K
0
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1-218-977-11
1-218-977-11
1-218-977-11
1-218-945-11
1-218-989-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
100K
100K
100K
220
1M
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R144
R147
1-216-864-11 SHORT CHIP
1-216-864-11 SHORT CHIP
R30
R31
R32
R33
R34
1-218-989-11
1-218-989-11
1-218-947-11
1-218-990-81
1-216-864-11
RES-CHIP
RES-CHIP
RES-CHIP
SHORT CHIP
SHORT CHIP
1M
1M
330
0
0
5%
5%
5%
1/16W
1/16W
1/16W
R35
R36
R37
R38
R39
1-162-961-11
1-218-947-11
1-218-947-11
1-218-941-81
1-218-941-81
CERAMIC CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
330PF
330
330
100
100
10%
5%
5%
5%
5%
50V
1/16W
1/16W
1/16W
1/16W
R40
R41
R42
R43
R44
1-218-941-81
1-218-941-81
1-218-977-11
1-218-961-11
1-218-977-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
100
100
100K
4.7K
100K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R52
R53
R54
R55
R57
1-218-962-11
1-218-979-11
1-218-990-81
1-218-973-11
1-218-967-11
RES-CHIP
RES-CHIP
SHORT CHIP
RES-CHIP
RES-CHIP
5.6K
150K
0
47K
15K
5%
5%
1/16W
1/16W
5%
5%
1/16W
1/16W
R58
R60
R61
R62
R63
1-218-969-11
1-218-941-81
1-218-941-81
1-218-941-81
1-218-977-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
22K
100
100
100
100K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R64
R65
R67
R68
R69
1-218-977-11
1-218-977-11
1-218-941-81
1-218-941-81
1-218-941-81
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
100K
100K
100
100
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R70
R71
R72
1-218-965-11 RES-CHIP
1-218-973-11 RES-CHIP
1-218-973-11 RES-CHIP
10K
47K
47K
5%
5%
5%
1/16W
1/16W
1/16W
0
0
< SWITCH >
SW1
1-529-565-61 SWITCH, PUSH (1 KEY) (DOWN)
< VIBRATOR >
X1
1-813-678-11 OSCILLATOR, CERAMIC (CHIP TYPE) (12MHz)
X2
1-795-561-21 VIBRATOR, CERAMIC (16.9344MHz)
*************************************************************
MISCELLANEOUS
***************
8
8
57
0 153
154
1-776-206-21 CORD (WITH CONNECTOR) (POWER)
(EXCEPT AEP,UK)
1-776-527-61 CORD (WITH CONNECTOR) (ISO) (POWER)
(AEP,UK)
1-780-199-11 CONDUCTIVE BOARD, CONNECTION
8-820-207-12 OPTICAL PICK-UP (KSS1000E/K1RP)
A-1088-615-A CHASSIS (OP) SUB ASSY (including M901)
LCD901 1-805-919-11 DISPLAY PANEL, LIQUID CRYSTAL
(AEP,UK,E,MX)
LCD901 1-805-920-11 DISPLAY PANEL, LIQUID CRYSTAL (US,CND)
M902
A-1088-614-A MOTOR ASSY, SL (SLED)
M903
A-1088-622-A MOTOR ASSY, LE (LOADING)
RE901 1-478-474-12 ENCODER, ROTARY (PUSH SELECT/VOLUME)
SW4
1-786-339-11 SWITCH (M) (LIMIT)
*************************************************************
47
CDX-GT20W/GT200/GT200E/GT200S/GT250S
Ref. No.
Part No.
Description
Remark
Ref. No.
1-479-077-12 REMOTE COMMANDER (RM-X151)
(GT20W:US/GT200:US,CND/GT250S)
2-548-729-01 LID, BATTERY CASE (for RM-X151)
(GT20W:US/GT200:US,CND/GT250S)
2-651-185-11 MANUAL, INSTRUCTION (ENGLISH,FRENCH)
(GT20W:CND/GT200:US,CND)
2-651-185-21 MANUAL, INSTRUCTION (ENGLISH,GERMAN,
FRENCH,ITALIAN,DUTCH)
(GT200:AEP,UK/GT200S)
2-651-185-31 MANUAL, INSTRUCTION (ENGLISH,RUSSIAN)
(GT200E)
2-651-185-41 MANUAL, INSTRUCTION (ENGLISH,SPANISH,
SIMPLIFIED CHINESE)
(GT250S)
2-651-185-51 MANUAL, INSTRUCTION (ENGLISH,SPANISH)
(GT20W:US)
2-651-186-11 MANUAL, INSTRUCTION, INSTALL (ENGLISH,
FRENCH)
(GT20W:CND/GT200:US,CND)
2-651-186-21 MANUAL, INSTRUCTION, INSTALL (ENGLISH,
GERMAN,FRENCH,ITALIAN,DUTCH)
(GT200:AEP,UK/GT200S)
2-651-186-31 MANUAL, INSTRUCTION, INSTALL (ENGLISH,
RUSSIAN)
(GT200E)
2-651-186-41 MANUAL, INSTRUCTION, INSTALL (ENGLISH,
SPANISH,SIMPLIFIED CHINESE)
(GT250S)
2-651-186-51 MANUAL, INSTRUCTION, INSTALL (ENGLISH,
SPANISH)
(GT20W:US)
X-2024-133-3 CASE ASSY (for FRONT PANEL) (EXCEPT US)
*************************************************************
48
Part No.
Description
Remark
PARTS FOR INSTALLATION AND CONNECTIONS
***************************************
ACCESSORIES
************
301
302
303
304
X-3382-647-1
2-187-743-02
3-246-011-01
A-1082-993-A
304
(GT200E/GT250S)
X-3366-972-2 SCREW ASSY (EXP), FITTING
(GT200:AEP,UK/GT200S)
305
306
307
308
301
FRAME ASSY, FITTING
COLLAR
KEY (FRAME)
SCREW ASSY (BS4), FITTING
3-259-776-01 SCREW (+K 5X8 TP)
(GT20W/GT200:US,CND/GT200E/GT250S)
1-465-459-41 ADAPTOR, ANTENNA (AEP,UK)
1-776-206-21 CORD (WITH CONNECTOR) (POWER)
(EXCEPT AEP,UK)
1-776-527-61 CORD (WITH CONNECTOR) (ISO) (POWER)
(AEP,UK)
302
303
×2
304
305
×4
306
307
308
CDX-GT20W/GT200/GT200E/
GT200S/GT250S
US Model
Canadian Model
SERVICE MANUAL
CDX-GT20W/GT200
AEP Model
UK Model
Ver. 1.2 2006. 03
CDX-GT200/GT200E/GT200S
E Model
Chinese Model
SUPPLEMENT-1
CDX-GT250S
File this supplement with the service manual.
Subject : Production country change.
The CDX-GT200 (AEP, UK), CDX-GT200S (AEP, UK) and CDX-GT250S (E) models has been changed in the production country to
Thailand from Chinese.
This service manual, SUPPLEMENT-1 only contains the change.
When servicing and inspecting, check the Model Number Label to see if the model is made in Thailand or Chinese.
DISCRIMINATION
CDX-GT200/GT200S ( China production model )
SONY
CDX-GT200
MODEL NO. CDX-GT200S
CDX-GT200/GT200S ( Thailand production model )
SONY
CLASS 1
LASER PRODUCT
CLASS 1
LASER PRODUCT
MADE IN CHINA
CDX-GT200(AEP,UK):2-645-598-0
CDX-GT200S(AEP,UK):2-654-026-0
CDX-GT250S ( China production model )
SONY
CDX-GT200
MODEL NO. CDX-GT200S
MODEL NO.CDX-GT250S
MADE IN THAILAND
CDX-GT200(AEP,UK):2-662-016-0
CDX-GT200S(AEP,UK):2-662-015-0
CDX-GT250S( Thailand production model )
SONY
MODEL NO.CDX-GT250S
CLASS 1
LASER PRODUCT
CDX-GT250S(E):2-645-595-0
2-654-609-0
CLASS 1
LASER PRODUCT
MADE IN THAILAND
CDX-GT250S(E):2-668-452-0
9-879-862-81
1
CDX-GT20W/GT200/GT200E/GT200S/GT250S
TABLE OF CONTENTS
1. DIAGRAMS
1-1.
1-2.
1-3.
1-4.
1-5.
1-6.
1-7.
1-8.
1-9.
Printed Wiring Boards –CD Mechanism Section– .............. 5
Schematic Diagram –CD Mechanism Section (1/2)– ......... 6
Schematic Diagram –CD Mechanism Section (2/2)– ......... 7
Printed Wiring Board –Main Section– ................................ 8
Schematic Diagram –Main Section (1/3)– .......................... 9
Schematic Diagram –Main Section (2/3)– ........................ 10
Schematic Diagram –Main Section (3/3)– ........................ 11
Printed Wiring Boards –Key Section– .............................. 12
Schematic Diagram –Key Section– ................................... 13
2. EXPLODED VIEWS
2-1.
2-2.
2-3.
2-4.
2-5.
2-6.
Main Section ..................................................................... 16
Front Panel Section ........................................................... 17
CD Mechanism Section (1) (MG-611WA-186//Q) ........... 18
CD Mechanism Section (2) (MG-611WA-186//Q) ........... 19
CD Mechanism Section (3) (MG-611WA-186//Q) ........... 20
CD Mechanism Section (4) (MG-611WA-186//Q) ........... 21
3. ELECTRICAL PARTS LIST ........................................ 22
2
CDX-GT20W/GT200/GT200E/GT200S/GT250S
SECTION 1
DIAGRAMS
• NOTE FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
THIS NOTE IS COMMON FOR PRINTED WIRING
BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary note is printed
in each block.)
For schematic diagrams.
For printed wiring boards.
Note:
• All capacitors are in µF unless otherwise noted. (p: pF)
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in Ω and 1/4 W or less unless otherwise
specified.
f
•
: internal component.
• C : panel designation.
Note:
• X : parts extracted from the component side.
• Y : parts extracted from the conductor side.
a
•
: Through hole.
•
: Pattern from the side which enables seeing.
(The other layers' patterns are not indicated.)
Note:
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part
number specified.
•
•
•
•
•
•
•
•
•
•
Note:
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
piéce portant le numéro
spécifié.
A : B+ Line.
B : B– Line.
H : adjustment for repair.
Voltages and waveforms are dc with respect to ground
under no-signal (detuned) conditions.
CD mechanism (1/2) and (2/2) sections
no mark : CD PLAY
Main (1/3), (2/3), (3/3) and Key sections
no mark : FM
(
) : AM/MW/LW
<
> : CD PLAY
∗
: Impossible to measure
Voltages are taken with a VOM (Input impedance 10 MΩ).
Voltage variations may be noted due to normal production tolerances.
Waveforms are taken with a oscilloscope.
Voltage variations may be noted due to normal production tolerances.
Circled numbers refer to waveforms.
Signal path.
J : CD PLAY
F : FM
f : AM/MW/LW
L : AUX
Caution:
Pattern face side:
(Side B)
Parts face side:
(Side A)
Parts on the pattern face side seen from the
pattern face are indicated.
Parts on the parts face side seen from the
parts face are indicated.
C
Q
These are omitted
B E
BE C
These are omitted
ECB
These are omitted
3
CDX-GT20W/GT200/GT200E/GT200S/GT250S
• WAVEFORMS
— SERVO BOARD — (CD PLAY)
1
4
IC2 5 (FEI)
7
IC2 ia (RFI)
IC3 ia (X1)
Approx.
1Vp-p
0V
1.1 Vp-p
Approx. 100 mVp-p
12 MHz
50 mV/DIV, 5 msec/DIV
0.5 V/DIV, 0.5 µsec/DIV
2
5
IC2 6 (TEI)
0.5 V/DIV, 0.2 µsec/DIV
IC2 of (FNI2), og (FNI1)
0V
1.5 Vp-p
Approx. 400 mVp-p
200 mV/DIV, 5 msec/DIV
0.5 V/DIV, 0.5 µsec/DIV
3
6
IC2 wd (XI)
IC2 oh (FPI2), oj (FPI1)
0.6 Vp-p
1.5 Vp-p
16.9344 MHz
0.5 V/DIV, 0.5 µsec/DIV
0.2 V/DIV, 0.2 µsec/DIV
— MAIN BOARD —
1
3
IC51 9 (XTI)
IC501 is (OSC IN)
1 Vp-p
8.664 MHz
18.432 MHz
0.5 V/DIV, 0.1 µsec/DIV
2
0.5 V/DIV, 0.1 µsec/DIV
IC501 i; (XIN)
0.7 Vp-p
32.768 kHz
0.2 V/DIV, 0.1 µsec/DIV
4
0.8 Vp-p
CDX-GT20W/GT200/GT200E/GT200S/GT250S
1-1. PRINTED WIRING BOARDS — CD MECHANISM SECTION —
2
1
3
4
: Uses unleaded solder.
5
6
7
8
9
10
11
12
13
14
A
C52
C10
FB2
CN2
TP7
R141
TP2
TP9
TP82
R2
TP85
R18
FMB4
R72
R83
TP98
TP84
TP83
TP99
R74
TP3
R84
TP97
R147
R57
C45
C44
R64
R75
FMB5
R144
FB3
C69
R97
R6
TP14
TP13
1-689-230-
TP4
TP5
TP15
TP12
R9
TP86
TP8
(Page 8)
IC1
BP10
TP10
R1
TP11
FMA3
TP87
R5
TP76
SW2
TP75
TP81
TP1
G
TP79
TP80
TP6
R71
SW3
R73
TP78
TP69
TP70
R98
F
TP77
TP91
FMA5
R86
R78
R79
R81
R82
C67
C66
R87
R85
TP68
TP67
R96
TP90
C62
R80
X1
TP92
C68
R67
TP62
TP74
TP89
TP61
TP65
TP25
TP28
C12 R11
1
C70
TP63
R69
R21
TP71
TP88
TP32
C43
BP60
16
E
C40
TP52
R70
R37
R60
R62
R61
C11
TP95
R42
TP64
C42
TP50
R63
CN
IC3
TP51
TP31
TP33
C41
TP22
D
R77
C60
R29
FMA4
R35
TP21
R8
IC2
C39
C71
IC6
R36
C58
TP72
TP49
R38
R39
R40
C36
X1
TP37
TP36
TP35
TP34
R68
R26
R30
R27
R25
R24
R34
R19
R23
C33 R28
C26
X2
R20
TP96
FB4
C133
Q2
R132
C32
X2
C72
R22
R133
C80 C132
TP53
R54
R53
R52
R32
R31
C30
Q3
TP44
TP27
TP46
C29
TP48
TP47
R7
TP45
C47
C49
TP42
C23
C25
TP43
R41
R14
C31
C20
C22
TP29
C13
R10
R17
C
C16
R13
C50
C53
C19
TP23
R15
C24
R55
R44
C15
R43
C54
C55
C14
C18
R33
B
C48
C46
C56
Q21
R12
R58
TP39 TP38
R65
FMA6
TP41
FMB3
C51
TP30
C17
R16
TP26 TP24
SW1
C7
H
• Semiconductor
Location
CDX-GT20W/GT200/GT200E/GT200S/GT250S
5
5
Ref. No.
IC1
IC2
IC3
IC6
Location
G-2
B-11
D-2
D-2
Q2
Q3
Q21
C-1
C-2
B-4
CDX-GT20W/GT200/GT200E/GT200S/GT250S
1-2. SCHEMATIC DIAGRAM — CD MECHANISM SECTION (1/2) — • Refer to page 4 for Waveforms.
R7
C18
R10
R17
C46
R55
R43
C15
R54
C45
R52
TP34
C44
R53
TP36
R44
TP37
C47
TP35
R57
TP33
C49
TP32
C48
R18
TP31
C50
C51
TP52
IC6
R42
TP38
C52
TP39
C53
C80
R22
R23
TP53
R58
C54
C55
C56
IC2
R41
R24
R40
R25
R39
R26
R38
R27
Q2
R132
C132
C43
C24
R133
TP41
C19
CN1
C133
C42
C60
C41
TP50
C72
C11
R12
R29 R19
C40
R37
R30
C58
R36
C16
TP51
TP21
TP22
TP49
TP23
TP24
R13
TP25
R35
R11
C39
TP26
R33
TP27
R31
C22
C20
TP28
C33
C32
TP44
TP42
TP43
R20
C12
R32
C29
C36
R28
TP48
TP47
TP45
C30
C31
TP46
X2
FB3
R34
C26
C25
C13
C10
C23
Q21
TP30
TP29
R14
R15
FB2
C14
FB4
R16
C17
(Page 7)
CDX-GT20W/GT200/GT200E/GT200S/GT250S
6
6
Q3
CDX-GT20W/GT200/GT200E/GT200S/GT250S
• Refer to page 4 for Waveforms.
1-3. SCHEMATIC DIAGRAM — CD MECHANISM SECTION (2/2) — • Refer to page 14 for IC Block Diagrams.
(Page 6)
(Page 11)
R97
TP88
R98
TP80
R144
TP81
TP82
R147
C67
R85
TP70
TP69
R75
C66
R78
TP79
C68
R79
R87
R80
TP92
R81
TP91
TP78
R82
TP90
TP77
R83
TP76
R77
R86
TP67
TP89
R84
TP75
TP68
CN2
TP74
R141
TP83
TP97
TP84
TP98
TP85
TP99
C69
TP86
R74
X1
TP87
R73
R72
R96
R71
C70
TP1
SW4
TP2
IC3
IC B/D
TP65
R70
TP64
C62
TP72
TP3
SW3
R5
TP4
R1
BP60
R8
SW2
R6
TP5
TP63
TP71
R69
R9
IC1
SW1
R2
TP62
R68
C7
TP61
BP10
TP10
TP13
R64
TP15
M901
C71
R63
TP6
TP8
M902
TP9
CDX-GT20W/GT200/GT200E/GT200S/GT250S
7
7
R65
TP14
R62
TP7
R61
TP12
R60
TP11
R21
M903
R67
CDX-GT20W/GT200/GT200E/GT200S/GT250S
1-4. PRINTED WIRING BOARD — MAIN SECTION —
2
1
: Uses unleaded solder.
3
4
5
6
7
8
9
10
11
12
13
14
J330
AUDIO OUT
REAR0
J1
(ANTENNA)
A
L
R
GT200:AEP,UK/GT200S
JC753
C474
JC755
C484
JC754
JC795
C775
YEL
CN601
C774 JW144
FU601
C751
R482
C771
C765
B
JW1
JW153
JC756
D752
D760
D759
D751
D754
R565
R671
FMB4
FB304
Q664
D601
FB303
C343
C301
C306
C305
JW127
JW45
JW146
JW145
JW82
R583
R582
R631
JW120
R691
JW52
JW51
JW48
GT200:AEP,UK
/GT200S
C631
R563
C519
JW65
R564
JW44
R543
R540
R541
Q581
Q582
R601
R584
FB606
IC602
R673
R542
R535
JW62
JW58
R517
R536
JW140
R561
GT250S
R585
S702
J
X501
S702
RESET
(Page 12)
CDX-GT20W/GT200/GT200E/GT200S/GT250S
8
21
1-868-117-
GT200:AEP,UK
/GT200S
CN701
R609
JW26
JW23
50
C502
R567
JC504
D503
YEL
JW5
JW8
JW137
JW6
JW10
D753
C479
IC
JC501
R692
GT250S
R568
R556
GT250S
R674
R632
R633
JW63
R514
C509
R519
JW75
D719
R901
C512
C514
R503
R513
C918
D502
C501
R636
JC533
R634
R547
R533
JW125
R504
R529
D512
Q631
• Semiconductor Location
JW119
R679
R672
R518
JW87
GT200:AEP,UK
/GT200S
R505
D903
R502
C508
R512
R521 GT200:AEP,UK
C516
/GT200S
JW109
R539
JC527
C507
R558
JW105
R902
C406
JW132
R522
JW139
FB603
C917
R508
X502
R511
R510
(Page 5)
JW117
R578
C513
R904
JW138
D704
D510
R509
C510
C503
JW86
I
L501
C511
R544
GT200:AEP,UK
/GT200S
JW68
C901
FB501
JW54
C903
R903
C902
JW148
C504
JW133
R905
JW76
R906
R570
R911
IC901
R914
R912
R913
GT250S
1
JW168
JW126
C51
R577
R663
R566
JW49
R661
FB309
R675
R676
JW149
JW154
FMB3
R507
X501
R907
C60
JW67
R664
JW103
JW155
R694
D580
C312
JW99
JW167
JW169
JW166
JW161
C905
GT200:AEP,UK R681
/GT200S
R528
R573
R756
R575
R662
JW108
C59
GT200:AEP,UK
/GT200S
JW122
R910
FB310
R301
FB308
R537
R557
JW70
IC51
R506
R532
R56
C58
R550
JW121
JW71
C57
R53
JW84
10K
R757
JW80
R61
JW85
R55
R52
R54
R57
R534
R546
Q580
FB307
FB604
R531
D581
FB305
R302
C407
D511
R551
9K
JW40
R58
X51
R545
C756
JW123
JW69
C53
GT200:AEP,UK
/GT200S
R677
JW156
R60
L51
R51
JW89
JW83
R59
JW11
JW25
FB410
Q51
GT250S
S502
FREQUENCY
SELECT
JW90
JW74
R4
R8
JW160
R9
C56
C55
C54
JW162
JW60
R7
GT200:AEP,UK
/GT200S
FB605
JW81
C410
R13
C62
JW104
C411
C310
C309
JW106
JW115
C308
JW28
JW130
JW96
JW97
JW150
R5
R6
JW131
C755
JW50
JW72
C302
JW56
L1
FB302
JW95
JW30
JW129
JW27
JC681
JW29
JW124
Q1
JW100
R479
JW118
D1
C5
CNP301
C622
D479
R410
R12
C7
H
IC401
JW164
R411
JW32
JW39
Q479
C754
R752
JW91
FB411
C4
R3
FB1
Q478
L301
R407
C6
R2
G
R406
R1
C13
JW93
R408
R409
C12
JW101
JW165
JW163
C3
JW94
C1
F
C776
JW31
JW111
JW42
JW92
C413
C2
D757
C461
R401
R405
GT250S
Q651
GT200:AEP,UK
/GT200S
C623
JW24
JW102
C412
Q22
L601
D762
R652
R654
C770
JW88
C602
D761
D609
R653
C750
C401
R29
R651
GT200:AEP,UK
/GT200S
JW18
JW66
C404
C405
D758
C451
JW20
C431
GT200:AEP,UK
/GT200S
E
D755
C465
C455
R441
R452
R462
Q461
R461
TU1
C601
C618
D651
C769
C441
D617
JW17
C758
C481
D
C471
JC1
R471
C435
C462
Q451
R451
JW142
JW143
C452
R481
C753
C432
R431
JW16
JW2
C617
JW7
C442
C445
Q481
C
JW15
JW22
R432
JW21
JW14
JW13
R442
JW12
C763
R472
JW3
JW53
Q431
Q441
D756
Q471
IC750 C764 JW9
8
(21)
Ref. No.
D1
D479
D502
D503
D510
D511
D512
D580
D581
D601
D609
D617
D651
D719
D751
D752
D753
D754
D755
D756
D757
D758
D759
D760
D761
D762
Location
F-3
E-6
I-7
I-5
H-8
F-6
H-8
F-11
F-11
C-10
D-8
C-9
C-9
I-4
D-7
D-7
D-7
D-7
C-5
C-6
C-6
C-6
D-8
D-8
C-9
D-9
Ref. No.
D903
Location
I-3
IC51
IC401
IC501
IC602
IC750
IC901
H-2
E-3
H-6
I-9
B-6
H-2
Q1
Q22
Q51
Q431
Q441
Q451
Q461
Q471
Q478
Q479
Q481
Q580
Q581
Q582
Q631
Q651
Q664
F-2
E-2
G-2
B-4
B-4
C-4
D-4
B-3
E-6
E-5
C-3
F-11
I-10
I-10
H-10
D-8
I-7
CDX-GT20W/GT200/GT200E/GT200S/GT250S
• Refer to page 4 for Waveforms.
1-5. SCHEMATIC DIAGRAM — MAIN SECTION (1/3) — • Refer to page 14 for IC Block Diagrams.
TU1
J330
R13
R3
R2
J1
R12
JC1
C484
C474
IC B/D
C7
FB1
C3
IC401
C401
FB411
JW102
C5
FB410
C411
C2
C410
R8 R29
R6
R4
C1
C13
C405
Q22
JW126
C404
R405
R9
D1
C412
R407
R408
C407
C451
R409
C6
R411
Q1
C441
L1
Q51
R905
JW60
C51
C461
R60
R52
R906 R912
Q431
R452
Q451
R451
C455
C452
R441
C445
C442
C465
C462
R442
Q441
R462
Q461
R461
R913
C58
R54
C56
C481
R61
R481
R482
R53
C55
C54
C57
C53
R432
R410
L51
R51
R431
R401
R1
C12
C431
C432
R406
R5
C406
C4
C435
C413
R7
JW169
R472
C471
C902
IC51
C901
Q481
Q471
(Page 10)
R471
IC901
Q479
IC B/D
D479
R55
R56
R57
R58
R59
C62
R914
C903
R904
Q478
R903
R907
C59
C479
R911
C60
JW85
JW84
X51
C905
D903
R910
(Page 11)
CDX-GT20W/GT200/GT200E/GT200S/GT250S
9
9
CDX-GT20W/GT200/GT200E/GT200S/GT250S
1-6. SCHEMATIC DIAGRAM — MAIN SECTION (2/3) — • Refer to page 15 for IC Block Diagrams.
C775
JC795
C765
C764
C774
IC B/D
C751
D751
D752
C750
D753
D754
JC754
JC755
D755
D756
IC750
D757
CN601
D758
D759
D760
D651
R651
JC753
(Page 9)
R609
C753
FU601
C763
JC756
C617
D761
C769
C770
C755
R479
D762
C754
R752
C602
C771
JW111
C623
C622
C776
C758
JW52
Q631
R633
R634
D617
L601
C756
JC681
C631
R631
R632
JW53
C618
Q651
R652
R654
R653
D609
(Page 11)
CDX-GT20W/GT200/GT200E/GT200S/GT250S
10
10
C601
D601
CDX-GT20W/GT200/GT200E/GT200S/GT250S
1-7. SCHEMATIC DIAGRAM — MAIN SECTION (3/3) — • Refer to page 4 for Waveforms.
(Page 9)
JW45
(Page 10)
JW149
(Page 7)
JC527
JW145
JW146
L301
D510
FB603
CN701
D719
FB304
CNP301
JW148
R578
JW127
FB303
C343
C301
JW140
C308
C302
R302
FB305
FB302
FB307
FB310
C310
C309
JW120
(Page 13)
D512
R301
R901
C312
R902
C917
C918
R679
D704
FB309
JC533
C306
C305
JW28
JW99
FB308
FB604
D511
IC602
R564
R531
FB606
R535
R556
R519
R533
R536
R601
S702
C519
R691
R672
R636
R529
R518
R692
JW48
X502
C507
JW86
JW49
C508
D502
R674
R558
C509
R543
R568
JC501
R517
JW125
R547
FB605
R542
Q664
R541
R563
R585
R561
X501
R565
R508
R540
R584
Q581
D503
R567
C510
L501
R509
D580
JC504
R582
Q582
C511
C514
R566
R675
C502
R676
R671
R505
R673
R503
C512
IC501
R502
C501
C516
C513
R528
R681
R677
R661 R522
S502
R521
R663
C503
FB501
R664
R662
R570
R514
R532
R511
R510
R512
R513
R577
R575
R544
R557
R506
R550
R551
R573
R537
R507
R545
R546
R534
R757
R694
C504
R756
CDX-GT20W/GT200/GT200E/GT200S/GT250S
11
Q580
D581
R504
R539
11
C516
R583
CDX-GT20W/GT200/GT200E/GT200S/GT250S
1
3
4
9
10
11
LSW910
LSW910
R963
S904
LSW909
LSW920
4
S911
LED904
52
LED911
LED942
LED904
FB903
D
S917
LED918
S916
LED917
S915
LED916
S914
LED915
S913
LED914
LED952
LSW903
SOURCE
S912
LED913
R910
LSW903
S918
R975
FB904
S919
11
1-868-898- (11)
S913
1
S914
2
S915
3/REP
S916
4/SHUF
S917
5
S918
6/PAUSE
S919
SENS/BTM (GT200:AEP,UK/GT200S))
LED912
MODE
LED913
1
LED914
2
LED915
3
LED916
4
LED917
5
LED918
6
SENS (GT250S)
LED919
SENS
S911
PTY (GT200:AEP,UK/GT200S)
FB901
2
IC971
S912
MODE
FB902
LSW920
DSPL/DIM
1
3
1
R953
–
BTM (GT250S)
LED911
PTY (GT200:AEP,UK/GT200S)
11
BTM (GT250S)
1-868-899- (11)
E
LED907
LCD901
LIQUID CRYSTAL DISPLAY PANEL
LED944
R961
LED941
SEEK–
. m
S908
R964
R962
LED919
S906
LED907,
S907
z/AF/TA
(GT200:AEP,UK/GT200S)
z/SCRL
(GT250S)
S907
R918
S906
GP/ALBM
+
LED908
LED943
LSW901
LED951
(DISC INDICATOR)
LED932
(LCD BACK LIGHT)
LED932
LED906
13
12
LED951
+
R902
8
LSW901
LSW909
SEEK+
M >
LED941-944
(RE LIGHT)
LED906
C
7
R942
LSW902
S904
GP/ALBM
–
6
LED908,
S908
EQ3
LSW902
OFF
B
5
LED912
A
2
: Uses unleaded solder.
R972
1-8. PRINTED WIRING BOARDS — KEY SECTION —
J901
AUX
• Semiconductor
Location
F
R
G
L
BLK
BRN
(Page 8)
BLU
MAIN BOARD
CN701
B
11
G
1-868-899- (11)
C981
C971
BLU
BLK
BRN
R974
R981
R982
R945
R931
D982
R933
R944
R978
FMB4
R977
R987
R899
R997
D981
R996
R985
R979
R906
C983
R986
C984
IC901
R998
R901
R991
Q932
R984
R960
R976
D901
Q931
R907
5
R941
4
R904 R905
R916
R946
D903
R934
R955
R956
I
R947
R951
2
RE901
CN901
C986
3
R948
R917
R908
R959
1
R903
R949
R915
R914
FMB3
R957
R909
C921 C922
R958
H
R913
R912
R950
R922
R954
R921
R924
R911
R923
R932
RE901
PUSH SELECT
(VOLUME)
11
J
1-868-898-
CDX-GT20W/GT200/GT200E/GT200S/GT250S
12
12
(11)
Ref. No.
D901
D903
D981
D982
Location
I-10
H-10
I-10
I-10
IC901
IC971
I-8
C-12
LED904
LED906
LED907
LED908
LED911
LED912
LED913
LED914
LED915
LED916
LED917
LED918
LED919
LED932
LED941
LED942
LED943
LED944
LED951
C-2
B-2
B-12
B-4
C-4
C-5
C-6
C-6
C-7
C-8
C-9
C-10
C-10
B-5
B-2
C-3
B-3
B-4
B-7
Q931
Q932
I-5
I-5
CDX-GT20W/GT200/GT200E/GT200S/GT250S
1-9. SCHEMATIC DIAGRAM — KEY SECTION —
R972
LSW902(2/2)
R931
LED919
R981
LED914
R982
LED907
R941
LED916
LED941
LED952
LED943
R996
LSW909(2/2)
LED908
LED904
IC971
R932
R942
LED918
C971
LED913
R961
LED932
LSW920(2/2)
R963
R997
R955
R957
R959
R899
LSW903(2/2)
LED915
R962
R964
R998
R956
R958
C983
C984
R960
LED917
LED951
D981
LED912
D982
LED911
LSW901(2/2)
Q931
R944
R946
R948
R950
R953
R945
R947
R949
R951
R954
LED942
LSW910(2/2)
LED944
LED906
C981
C986
IC901
R984
R985
R986
R987
R933
R977
R978
R979
R934
Q932
R991
D901
CN901
D903
RE901
R976
LCD901
R974
FB904
R905
R901
R902
R903
R904
R975
R910
R911
R912
R913
R914
S912
S913
S914
S915
S916
S904
C921
R915
R916
R917
S918
S919
R922
S917
R921
R918
LSW920(1/2)
R909
S906
R908
S911
LSW903(1/2)
LSW902(1/2)
R907
LSW910(1/2)
FB902
S908
FB901
J901
S907
R906
C922
LSW901(1/2)
(Page 11)
LSW909(1/2)
R923
R924
FB903
CDX-GT20W/GT200/GT200E/GT200S/GT250S
13
13
CDX-GT20W/GT200/GT200E/GT200S/GT250S
• IC Block Diagrams
MUTE
SEL
ADJ
VCC
OUT
FR
OUT
RR
OUT
FL
OUT
RL
NC
NC
NC
OUT
SUB R
OUT
SUB L
FWD REV
SCL
28 REV
FWD 1
SDA
IC401 BD3806AFS-E2 (MAIN Board (1/3))
DGND
IC1 BA5968FP-E2 (SERVO Board (2/2))
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
27 OPIN4+
LDCTL 2
VCC
OUTR OUTF
NC 3
26 OPIN4–
OPOUT1 4
25 OPOUT4
NC 5
FADER
(0~-58,
-∞dB)
24 OPIN3+
2
I C BUS
LOGIC
NC 6
VCO
FADER
(0~-58,
-∞dB)
FADER
(0~-58,
-∞dB)
FADER
(0~-58,
-∞dB)
GAIN+ATT
(+10~-29,
-∞dB)
23 OPIN3–
OPOUT2 7
POWVCC 8
VOL– 9
2ND ORDER LPF
fc:OFF,80,120,160Hz
Q: 0.707
22 OPOUT3
VCC
BASS
fo:60,70,80,100,120,140,160,200Hz
Q:0.5,0.75,1,1.25
21 MUTE
20 VOL+
19 GND
MUTE
VOL+ 10
18 VOL3–
VOL2– 11
LEVEL
SHIFT
LEVEL
SHIFT
VOL2+ 12
17 VOL3+
VO1– 13
2ND ORDER
LPF
MIX
TONE
PASS
TONE
PASS
MIDDLE
fo:500Hz,1kHz
Q:1
BASS,TREBLE, MIDDLE
(-15dB~+15dB,1dB STEP)
BASS,TREBLE, MIDDLE
(-15dB~+15dB,1dB STEP)
TABLE
fo:5,7.5,10,12.5kHz
VOLUME
(+23~-79dB,-∞dB
1dB STEP)
VOLUME
(+23~-79dB,-∞dB
1dB STEP)
16 VOL4–
LEVEL
SHIFT
LEVEL
SHIFT
VO1+ 14
fc:53.3kHz
15 VOL4+
fc:53.3kHz
ANTI-ALIASING
FILTER
ANTI-ALIASING
FILTER
INPUT GAIN
(0~15dB,1dB STEP)
INPUT GAIN
(0~15dB,1dB STEP)
MUTE
MUTE
INPUT SELECTOR
(3 STEREO INCLUDE 1 ISOLATION INPUT)
IC51 TDA7333013TR (MAIN Board (1/3))
VCC/2
REF2 3
REF1 4
VSS 5
MPX
REF3 2
RAM
RDS
RDSREG BUFFER
INTN DEMODULATOR &
&
SYNCHRONIZATION
CONTROL
LOGIC
TM 6
VDDD 7
15 INTN
SDAOUT
SDAIN
TEST LOGIC
SCK
I C/SPI
&
INTERFACE SPI
PIN MUX'S
TESTREG
2
14
13
12
11
CSN
SA_DATAOUT
SDA_DATAIN
SCL_CLK
2
10 XTO
OSCILLATOR
9 XTI
RESETN 8
CDX-GT20W/GT200/GT200E/GT200S/GT250S
14
14
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
AUX
LCH
TU
RCH
TU
LCH
CD
RCH
CD
LCH
NC
NC
NC
NC
NC
NC
NC
16 MPX
AN
SIGMA DELTA
CONVERTER
SINC4REG
VDDA 1
SINC4
FILTER
AUX
RCH
BAND PASS
FILTER
FIL
INTERPOLATOR
AGND
3
CDX-GT20W/GT200/GT200E/GT200S/GT250S
IC750 TDA8588BJ/N2/R1 (MAIN Board (2/3))
(GT250S)
IC750 TDA8588BJ/N2/R1/M5 (MAIN Board (2/3))
(GT200: AEP, UK/GT200S)
TAB 1
2 SDA
OUT FL- 3
I2C BUS
4 SCL
FL
OUT FL+ 5
6 VP2
OUT RL- 7
RL
8 PGND3
OUT RL+ 9
PROTECTION
DIAGNOSTIC
INRR 15
12 INFL
14 INFR
MUTE
SGND 13
10 SVR
MUTE
INRL 11
16 AC GND
VP
OUT RR+ 17
RR
18 PGND2
OUT RR- 19
20 VP1
OUT FR+ 21
FR
OUT FR- 23
STANDBY
MUTE
22 STB
CHIP DETECT
DIAGNOSTIC
24 PGND1
TEMPERATURE
PROTECTION
DIAG 25
ENABLE
LOGIC
26 RST
SW2(ANT REM) 27
SWITCH
SW1(ANT REM) 29
SWITCH
28 CRES
REGULATOR
30 REG1(AUDIO +B)
REG3(SERVO) 31
REG4(DR+B) 33
32 GND(REG)
34 REG5(ILL)
VP(REG) 35
REFERENCE
VOLTAGE
REG2(BU 5V) 37
REGULATOR
36 CBU
LOADDUMP
PROTECTION
BACK-UP
SWITCH
15
CDX-GT20W/GT200/GT200E/GT200S/GT250S
SECTION 2
EXPLODED VIEWS
NOTE:
• The mechanical parts with no reference
number in the exploded views are not supplied.
• Items marked “*” are not stocked since
they are seldom required for routine service.
Some delay should be anticipated
when ordering these items.
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
• Color Indication of Appearance Parts
Example :
KNOB, BALANCE (WHITE) ... (RED)
R
R
Parts Color Cabinet’s Color
• Accessories are given in the last of this
parts list.
The components identified by
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
Les composants identifiés par une
marque 0 sont critiques pour
la sécurité.
Ne les remplacer que par une piéce
portant le numéro spécifié.
2-1. MAIN SECTION
A
MG-611WA-186//Q
#2
#1
not supplied
A
7
B
FU601
4
#3
not supplied
5
6
3
#1
TU1
not supplied
B
2
#1
not supplied
#1
1
Ref. No.
Part No.
Description
1
2
3
4
5
X-2059-813-1
3-042-244-11
X-3383-739-1
2-050-124-01
A-1156-888-A
PANEL ASSY, SUB
SCREW (T)
LOCK ASSY (S)
SCREW +BTT 2.6X5
MAIN BOARD, COMPLETE
(GT200:AEP,UK/GT200S)
5
6
A-1156-933-A MAIN BOARD, COMPLETE (GT250S)
2-021-848-01 SHEET (TU), GROUND
16
Remark
Ref. No.
7
7
Part No.
Description
Remark
FU601
TU1
#1
1-776-206-21 CORD (WITH CONNECTOR) (POWER) (GT250S)
1-776-527-61 CORD (WITH CONNECTOR) (ISO) (POWER)
(GT200:AEP,UK/GT200S)
1-532-877-11 FUSE (BLADE TYPE) (AUTO FUSE) 10A
A-3220-961-B TUNER UNIT (TUX-032)
7-685-792-09 SCREW +PTT 2.6X6 (S)
#2
#3
7-685-790-01 SCREW +PTT 2.6X4 (S)
7-685-793-09 SCREW +PTT 2.6X8 (S)
CDX-GT20W/GT200/GT200E/GT200S/GT250S
2-2. FRONT PANEL SECTION
60
58
60
RE901
57
59
LCD901
61
not supplied
(KEY board)
not supplied
56
not supplied
55
not
supplied
not supplied
not supplied
not supplied
51
not supplied
not supplied
54
53
not supplied
(JACK board)
52
Ref. No.
Part No.
Description
Remark
51
51
51
52
53
X-2103-312-1
X-2103-313-1
X-2103-314-1
3-251-320-01
X-2103-195-1
BUTTON ASSY (S) (GT200:AEP,UK)
BUTTON ASSY (S) (GT200S)
BUTTON ASSY (S) (GT250S)
EMBLEM (NO. 2.5), SONY
PANEL SUB ASSY, FRONT (GT200S)
53
53
54
55
56
X-2103-294-1
X-2103-298-1
X-2103-316-1
2-639-881-01
1-780-199-11
PANEL SUB ASSY, FRONT (GT200:AEP,UK)
PANEL SUB ASSY, FRONT (GT250S)
KNOB (VOL) (SV) ASSY
SPRING (RELEASE)
CONDUCTIVE BOARD, CONNECTION
Ref. No.
Part No.
Description
Remark
57
58
58
58
59
2-661-454-01
A-1156-892-A
A-1156-908-A
A-1156-937-A
2-652-792-01
ILLUMINATOR (LCD)
PANEL ASSY, FRONT (GT200S)
PANEL ASSY, FRONT (GT200:AEP,UK)
PANEL ASSY, FRONT (GT250S)
PANEL, FRONT BACK
60
61
LCD901
RE901
3-250-543-21
X-2055-358-1
1-805-919-11
1-478-474-12
SCREW (+B P-TITE M2)
CASE ASSY (for FRONT PANEL)
DISPLAY PANEL, LIQUID CRYSTAL
ENCODER, ROTARY (PUSH/SELECT VOLUME)
17
CDX-GT20W/GT200/GT200E/GT200S/GT250S
2-3. CD MECHANISM SECTION (1)
(MG-611WA-186//Q)
102
not supplied
(SENSOR board)
101
not supplied
#4
not supplied
not supplied
not supplied
103
104
106
105
108
107
Ref. No.
101
102
103
104
105
18
Part No.
Description
A-3372-444-C
3-253-729-11
3-257-892-12
3-257-892-01
2-345-767-11
CHASSIS (T) SUB ASSY
SPRING (LR), TENSION COIL
SPRING (DAMPER), COIL (GREEN)
SPRING (DAMPER), COIL (NATURAL)
SPRING (KF60), TENSION
Remark
Ref. No.
106
107
108
#4
Part No.
Description
3-259-033-01
2-587-505-01
A-1132-412-A
7-627-552-87
DAMPER (S)
SCREW
SERVO BOARD, COMPLETE
SCREW, PRECISION +P 1.7X2.2
Remark
CDX-GT20W/GT200/GT200E/GT200S/GT250S
2-4. CD MECHANISM SECTION (2)
(MG-611WA-186//Q)
155
156
157
154
(including M901)
#5
M902
not supplied
SW4
not
supplied
not supplied
not supplied
153
not supplied
151
152
Ref. No.
Part No.
Description
Remark
151
152
0 153
154
155
A-1075-644-A
3-316-938-91
8-820-207-12
A-1075-645-A
A-3372-449-A
CHASSIS (OP) COMPLETE ASSY
SCREW (B1.4X5), TAPPING
OPTICAL PICK-UP (KSS1000E/K1RP)
CHASSIS (OP) SUB ASSY (including M901)
ARM SUB ASSY, CHUCKING
Ref. No.
156
157
M902
SW4
#5
Part No.
Description
A-3372-446-A
X-3384-090-3
A-3372-447-A
1-571-099-11
7-627-850-77
LEVER (SL) SUB ASSY
LEVER (SL) ASSY
MOTOR ASSY, SL (SLED)
SWITCH (1 KEY) (LIMIT)
SCREW, PRECISION +P 1.4X1.8
Remark
19
CDX-GT20W/GT200/GT200E/GT200S/GT250S
2-5. CD MECHANISM SECTION (3)
(MG-611WA-186//Q)
203
201
202
207
211
204
209
208
210
205
207
207
M903
#4
206
Ref. No.
Part No.
Description
201
202
203
204
205
3-348-993-01
2-186-699-01
A-1075-641-C
2-635-295-11
2-635-296-11
WASHER
GEAR (RA1)
ARM ASSY, ROLLER
SPRING (RAL-B)
SPRING (RAR-B)
206
207
3-259-469-12 SPRING (LE), LEAF
2-134-636-21 SCREW (M1.7X2.5)
20
Remark
Ref. No.
Part No.
Description
208
209
210
211
M903
2-186-696-02
3-345-648-91
A-1083-636-A
2-186-697-01
A-1166-300-A
BRACKET (LEM-N)
SCREW (M1.4), TOOTHED LOCK
GEAR (LE) ASSY
BEARING (LEB-N)
MOTOR ASSY (B), LE (LOADING)
#4
7-627-552-87 SCREW, PRECISION +P 1.7X2.2
Remark
CDX-GT20W/GT200/GT200E/GT200S/GT250S
2-6. CD MECHANISM SECTION (4)
(MG-611WA-186//Q)
254
255
252
258
251
256
253
257
Ref. No.
251
252
253
254
Part No.
Description
2-186-700-01
3-344-223-01
3-259-470-12
3-253-755-41
GEAR (CHK1)
WASHER
GEAR (LE1)
LEVER (D)
Remark
Ref. No.
255
256
257
258
Part No.
Description
2-630-962-01
2-590-545-31
A-1075-640-B
3-348-993-01
WASHER (SLIT)
GEAR (LE2-M)
CHASSIS (M) BLOCK ASSY
WASHER
Remark
21
CDX-GT20W/GT200/GT200E/GT200S/GT250S
SECTION 3
JACK KEY
ELECTRICAL PARTS LIST
NOTE:
• Due to standardization, replacements in
the parts list may be different from the
parts specified in the diagrams or the
components used on the set.
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
• RESISTORS
All resistors are in ohms.
METAL:Metal-film resistor.
METAL OXIDE: Metal oxide-film resistor.
F:nonflammable
Ref. No.
Part No.
• Items marked “*” are not stocked since
they are seldom required for routine service.
Some delay should be anticipated
when ordering these items.
• SEMICONDUCTORS
In each case, u : µ, for example:
uA.. : µA.. uPA.. : µPA..
uPB.. : µPB.. uPC..: µPC.. uPD.. : µPD..
• CAPACITORS
uF : µF
• COILS
uH : µH
Description
Remark
JACK BOARD
***********
1-216-864-11 SHORT CHIP
1-216-864-11 SHORT CHIP
1-216-295-11 SHORT CHIP
0
0
0
< JACK >
J901
1-819-732-11 JACK (DIA. 3.5) (AUX)
*************************************************************
KEY BOARD
**********
< CAPACITOR >
C921
C922
C971
C981
C983
1-163-031-11
1-163-031-11
1-107-826-11
1-107-826-11
1-107-826-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
C984
C986
1-107-826-11 CERAMIC CHIP
1-125-837-11 CERAMIC CHIP
Part No.
Les composants identifiés par une
marque 0 sont critiques pour
la sécurité.
Ne les remplacer que par une piéce
portant le numéro spécifié.
Description
Remark
LED907 8-719-053-09 LED SML-310VTT86 (z/AF/TA)
(GT200:AEP,UK/GT200S)
LED907 8-719-053-09 LED SML-310VTT86 (z/SCRL) (GT250S)
LED908 8-719-053-09 LED SML-310VTT86 (EQ3)
LED911 8-719-053-09 LED SML-310VTT86 (PTY)
(GT200:AEP,UK/GT200S)
LED911 8-719-053-09 LED SML-310VTT86 (BTM) (GT250S)
< JUMPER RESISTOR >
FB901
FB902
FB903
Ref. No.
The components identified by
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
0.01uF
0.01uF
0.1uF
0.1uF
0.1uF
10%
10%
10%
50V
50V
16V
16V
16V
0.1uF
1uF
10%
10%
16V
6.3V
LED912
LED913
LED914
LED915
LED916
8-719-053-09
8-719-053-09
8-719-053-09
8-719-053-09
8-719-053-09
LED
LED
LED
LED
LED
SML-310VTT86 (MODE)
SML-310VTT86 (1)
SML-310VTT86 (2)
SML-310VTT86 (3)
SML-310VTT86 (4)
LED917
LED918
LED919
LED932
LED941
8-719-053-09
8-719-053-09
8-719-053-09
6-501-339-01
8-719-053-09
LED
LED
LED
LED
LED
SML-310VTT86 (5)
SML-310VTT86 (6)
SML-310VTT86 (SENS)
NESW505CT-AST (LCD BACK LIGHT)
SML-310VTT86 (RE LIGHT)
LED942
LED943
LED944
LED951
8-719-053-09
8-719-053-09
8-719-053-09
8-719-053-09
LED
LED
LED
LED
SML-310VTT86 (RE LIGHT)
SML-310VTT86 (RE LIGHT)
SML-310VTT86 (RE LIGHT)
SML-310VTT86 (DISC INDICATOR)
< RESISTOR >
LED952 1-216-813-11 METAL CHIP
220
5%
1/10W
< CONNECTOR >
< SWITCH >
CN901
1-819-758-11 PLUG, CONNECTOR 15P
< DIODE >
D901
D903
D981
D982
6-500-886-01
8-719-083-66
8-719-069-54
8-719-988-61
DIODE
DIODE
DIODE
DIODE
RSA6.1ENTR
UDZSTE-1718B
UDZSTE-175.1B
1SS355TE-17
< JUMPER RESISTOR >
FB904
1-216-864-11 SHORT CHIP
SWITCH, TACTILE (WITH LED) (Z)
SWITCH, TACTILE (WITH LED) (OFF)
SWITCH, TACTILE (WITH LED) (SOURCE)
SWITCH, TACTILE (WITH LED)
(SEEK+ M >)
LSW910 1-786-805-12 SWITCH, TACTILE (WITH LED)
(SEEK– . m)
LSW920 1-786-805-12 SWITCH, TACTILE (WITH LED) (DSPL/DIM)
< TRANSISTOR >
Q931
Q932
8-729-027-44 TRANSISTOR DTC114TKA-T146
8-729-027-58 TRANSISTOR DTC143ZKA-T146
6-707-063-01 IC LC75826WH-US-E
6-600-163-01 IC RS-770 (IR)
< DIODE >
LED904 8-719-053-09 LED SML-310VTT86 (–)
LED906 8-719-053-09 LED SML-310VTT86 (+)
22
1-786-805-12
1-786-805-12
1-786-805-12
1-786-805-12
0
< IC >
IC901
IC971
LSW901
LSW902
LSW903
LSW909
< RESISTOR >
R899
R901
R902
R903
R904
1-216-864-11
1-216-819-11
1-216-819-11
1-216-819-11
1-216-821-11
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
680
680
680
1K
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
CDX-GT20W/GT200/GT200E/GT200S/GT250S
KEY
Ref. No.
Part No.
Description
R905
R906
R907
R908
R909
1-216-823-11
1-216-819-11
1-216-819-11
1-216-819-11
1-216-821-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1.5K
680
680
680
1K
5%
5%
5%
5%
5%
Remark
1/10W
1/10W
1/10W
1/10W
1/10W
Ref. No.
R996
R997
R998
R910
R911
R912
R913
R914
1-216-823-11
1-216-823-11
1-216-825-11
1-216-827-11
1-216-829-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1.5K
1.5K
2.2K
3.3K
4.7K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
S904
S906
S907
R915
R916
R917
R918
R921
1-218-867-11
1-216-833-11
1-216-835-11
1-216-837-11
1-216-041-00
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
RES-CHIP
6.8K
10K
15K
22K
470
0.5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R922
R923
R924
R931
R932
1-216-041-00
1-216-041-00
1-216-041-00
1-216-031-00
1-216-031-00
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
470
470
470
180
180
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R933
R934
R941
R942
R944
1-216-031-00
1-216-051-00
1-216-033-00
1-216-033-00
1-216-031-00
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
180
1.2K
220
220
180
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R945
R946
R947
R948
R949
1-216-031-00
1-216-027-00
1-216-029-00
1-216-033-00
1-216-033-00
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
180
120
150
220
220
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R950
R951
R953
R954
R955
1-216-027-00
1-216-029-00
1-216-037-00
1-216-037-00
1-216-031-00
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
120
150
330
330
180
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R956
R957
R958
R959
R960
1-216-031-00
1-216-033-00
1-216-033-00
1-216-033-00
1-216-033-00
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
180
220
220
220
220
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R961
R962
R963
R964
R972
1-216-033-00
1-216-033-00
1-216-033-00
1-216-033-00
1-216-809-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
METAL CHIP
220
220
220
220
100
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R974
R975
R976
R977
R978
1-216-864-11
1-216-864-11
1-216-864-11
1-216-809-11
1-216-809-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
0
0
0
100
100
5%
5%
1/10W
1/10W
R979
R981
R982
R984
R985
1-216-809-11
1-216-811-11
1-216-811-11
1-216-821-11
1-216-821-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
150
150
1K
1K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R986
R987
R991
1-216-821-11 METAL CHIP
1-216-857-11 METAL CHIP
1-216-864-11 SHORT CHIP
1K
1M
0
5%
5%
1/10W
1/10W
Part No.
Description
1-216-035-00 RES-CHIP
1-216-037-00 RES-CHIP
1-216-033-00 RES-CHIP
MAIN
Remark
270
330
220
5%
5%
5%
1/10W
1/10W
1/10W
< SWITCH >
S907
S908
S911
1-786-653-11 SWITCH, TACTILE (GP/ALBM–)
1-786-653-11 SWITCH, TACTILE (GP/ALBM+)
1-786-653-11 SWITCH, TACTILE (z/AF/TA)
(GT200:AEP,UK/GT200S)
1-786-653-11 SWITCH, TACTILE (z/SCRL) (GT250S)
1-786-653-11 SWITCH, TACTILE (EQ3)
S911
S912
S913
S914
1-786-653-11 SWITCH, TACTILE (PTY)
(GT200:AEP,UK/GT200S)
1-786-653-11 SWITCH, TACTILE (BTM) (GT250S)
1-786-653-11 SWITCH, TACTILE (MODE)
1-786-653-11 SWITCH, TACTILE (1)
1-786-653-11 SWITCH, TACTILE (2)
S915
S916
S917
S918
S919
1-786-653-11
1-786-653-11
1-786-653-11
1-786-653-11
1-786-653-11
SWITCH, TACTILE (3/REP)
SWITCH, TACTILE (4/SHUF)
SWITCH, TACTILE (5)
SWITCH, TACTILE (6/PAUSE)
SWITCH, TACTILE (SENS/BTM)
(GT200:AEP,UK/GT200S)
S919
1-786-653-11 SWITCH, TACTILE (SENS) (GT250S)
*************************************************************
A-1156-888-A MAIN BOARD, COMPLETE
(GT200:AEP,UK/GT200S)
A-1156-933-A MAIN BOARD, COMPLETE (GT250S)
*********************
7-685-134-19 SCREW +P 2.6X8 TYPE2 NON-SLIT
7-685-794-09 SCREW +PTT 2.6X10 (S)
< CAPACITOR >
C1
1-162-964-11 CERAMIC CHIP
0.001uF 10%
50V
(GT200:AEP,UK/GT200S)
0.001uF 10%
50V
(GT200:AEP,UK/GT200S)
4.7uF
20%
50V
(GT200:AEP,UK/GT200S)
47uF
20%
35V
47uF
20%
35V
C2
1-162-964-11 CERAMIC CHIP
C3
1-126-963-11 ELECT
C4
C5
1-126-947-11 ELECT
1-126-947-11 ELECT
C6
C7
C12
C13
C51
1-162-970-11
1-162-970-11
1-162-970-11
1-162-970-11
1-126-947-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
0.01uF
10%
25V
0.01uF
10%
25V
0.01uF
10%
25V
0.01uF
10%
25V
47uF
20%
35V
(GT200:AEP,UK/GT200S)
C53
1-107-826-11 CERAMIC CHIP
C54
1-107-826-11 CERAMIC CHIP
C55
1-107-826-11 CERAMIC CHIP
C56
1-107-826-11 CERAMIC CHIP
C57
1-107-826-11 CERAMIC CHIP
0.1uF
10%
16V
(GT200:AEP,UK/GT200S)
0.1uF
10%
16V
(GT200:AEP,UK/GT200S)
0.1uF
10%
16V
(GT200:AEP,UK/GT200S)
0.1uF
10%
16V
(GT200:AEP,UK/GT200S)
0.1uF
10%
16V
(GT200:AEP,UK/GT200S)
C58
1-107-826-11 CERAMIC CHIP
0.1uF
10%
16V
(GT200:AEP,UK/GT200S)
23
CDX-GT20W/GT200/GT200E/GT200S/GT250S
MAIN
Ref. No.
Part No.
Description
Remark
C59
1-164-237-11 CERAMIC CHIP
C60
1-162-916-11 CERAMIC CHIP
C62
1-162-959-11 CERAMIC CHIP
C301
C302
1-128-551-11 ELECT
1-104-665-11 ELECT
16PF
5%
50V
(GT200:AEP,UK/GT200S)
12PF
5%
50V
(GT200:AEP,UK/GT200S)
330PF
5%
50V
(GT200:AEP,UK/GT200S)
22uF
20%
63V
100uF
20%
25V
C305
C306
C308
C309
C310
1-104-665-11
1-162-970-11
1-162-970-11
1-162-966-11
1-162-966-11
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
100uF
0.01uF
0.01uF
0.0022uF
0.0022uF
20%
10%
10%
10%
10%
25V
25V
25V
50V
50V
C312
C343
C401
C404
C405
1-162-970-11
1-162-970-11
1-126-964-11
1-127-715-11
1-127-715-11
CERAMIC CHIP
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
0.01uF
0.01uF
10uF
0.22uF
0.22uF
10%
10%
20%
10%
10%
25V
25V
50V
16V
16V
C406
C407
C410
C411
C412
1-126-960-11
1-126-960-11
1-162-923-11
1-162-923-11
1-126-934-11
ELECT
ELECT
CERAMIC CHIP
CERAMIC CHIP
ELECT
1uF
1uF
47PF
47PF
220uF
20%
20%
5%
5%
20%
50V
50V
50V
50V
16V
C413
C431
C432
C435
C441
1-162-970-11
1-126-964-11
1-165-908-11
1-165-908-11
1-126-964-11
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
ELECT
0.01uF
10uF
1uF
1uF
10uF
10%
20%
10%
10%
20%
25V
50V
10V
10V
50V
C442
C445
C451
C452
C455
1-165-908-11
1-165-908-11
1-126-964-11
1-165-908-11
1-165-908-11
CERAMIC CHIP
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
1uF
1uF
10uF
1uF
1uF
10%
10%
20%
10%
10%
10V
10V
50V
10V
10V
C461
C462
C465
C471
C474
1-126-964-11
1-165-908-11
1-165-908-11
1-126-964-11
1-163-251-11
ELECT
CERAMIC CHIP
CERAMIC CHIP
ELECT
CERAMIC CHIP
10uF
1uF
1uF
10uF
100PF
20%
10%
10%
20%
5%
50V
10V
10V
50V
50V
C479
C481
C484
C501
C502
1-126-947-11
1-126-964-11
1-163-251-11
1-162-970-11
1-162-964-11
ELECT
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
47uF
10uF
100PF
0.01uF
0.001uF
20%
20%
5%
10%
10%
35V
50V
50V
25V
50V
C503
C504
C507
C508
C509
1-104-665-11
1-162-970-11
1-162-917-11
1-162-917-11
1-162-966-11
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
100uF
0.01uF
15PF
15PF
0.0022uF
20%
10%
5%
5%
10%
25V
25V
50V
50V
50V
C510
C511
C512
C513
C514
1-162-970-11
1-104-665-11
1-162-964-11
1-162-964-11
1-162-964-11
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
100uF
0.001uF
0.001uF
0.001uF
10%
20%
10%
10%
10%
25V
25V
50V
50V
50V
C516
1-162-964-11 CERAMIC CHIP
C516
C519
C601
C602
1-216-864-11
1-107-826-11
1-131-868-81
1-165-319-11
24
SHORT CHIP
CERAMIC CHIP
ELECT
CERAMIC CHIP
0.001uF 10%
50V
(GT200:AEP,UK/GT200S)
0 (GT250S)
0.1uF
10%
16V
3300uF
20%
16V
0.1uF
50V
Ref. No.
Part No.
Description
C617
C618
C622
C623
C631
1-163-009-11
1-163-009-11
1-126-916-11
1-126-916-11
1-126-960-11
CERAMIC CHIP
CERAMIC CHIP
ELECT
ELECT
ELECT
0.001uF
0.001uF
1000uF
1000uF
1uF
10%
10%
20%
20%
20%
50V
50V
6.3V
6.3V
50V
Remark
C750
C751
C753
C754
C755
1-115-340-11
1-115-340-11
1-128-551-11
1-126-961-11
1-162-964-11
CERAMIC CHIP
CERAMIC CHIP
ELECT
ELECT
CERAMIC CHIP
0.22uF
0.22uF
22uF
2.2uF
0.001uF
10%
10%
20%
20%
10%
25V
25V
63V
50V
50V
C756
C758
C763
C764
C765
1-127-715-11
1-126-964-11
1-127-715-11
1-115-340-11
1-115-340-11
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.22uF
10uF
0.22uF
0.22uF
0.22uF
10%
20%
10%
10%
10%
16V
50V
16V
25V
25V
C769
C770
C771
C774
C775
1-127-715-11
1-127-715-11
1-127-715-11
1-115-340-11
1-115-340-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.22uF
0.22uF
0.22uF
0.22uF
0.22uF
10%
10%
10%
10%
10%
16V
16V
16V
25V
25V
C776
C901
C902
C903
C905
1-162-964-11
1-109-982-11
1-109-982-11
1-126-961-11
1-162-970-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
CERAMIC CHIP
0.001uF
1uF
1uF
2.2uF
0.01uF
10%
10%
10%
20%
10%
50V
10V
10V
50V
25V
C917
C918
1-163-017-00 CERAMIC CHIP
1-163-017-00 CERAMIC CHIP
0.0047uF 10%
0.0047uF 10%
50V
50V
< CONNECTOR >
CN601 1-774-701-21 PIN, CONNECTOR 16P
CN701 1-819-773-11 SOCKET, CONNECTOR 15P
CNP301 1-817-536-11 CONNECTOR, BOARD TO BOARD 28P
< DIODE >
D1
D479
D502
D503
D510
6-501-168-01
6-501-193-01
6-500-084-01
6-501-193-01
6-501-013-01
DIODE
DIODE
DIODE
DIODE
DIODE
UDZW-TE17-5.6B
1SS355WTE-17
RB751V40T1
1SS355WTE-17
BAT54ALT1G
D511
D512
D580
D581
D601
6-500-335-01
6-501-051-01
6-501-171-01
6-501-180-01
8-719-049-38
DIODE
DIODE
DIODE
DIODE
DIODE
MC2838-T112-1
BAT54CLT1G
UDZW-TE17-7.5B
UDZW-TE17-18B
1N5404TU
D609
D617
D651
D704
D719
6-501-170-01 DIODE UDZW-TE17-6.8B
6-501-180-01 DIODE UDZW-TE17-18B
6-501-180-01 DIODE UDZW-TE17-18B
(GT200:AEP,UK/GT200S)
1-216-295-11 SHORT CHIP
0
6-501-180-01 DIODE UDZW-TE17-18B
D751
D752
D753
D754
D755
6-500-522-01
6-500-522-01
6-500-522-01
6-500-522-01
6-500-522-01
D756
D757
D758
6-500-522-01 DIODE 10EDB40-TA1B2
6-500-522-01 DIODE 10EDB40-TA1B2
6-500-522-01 DIODE 10EDB40-TA1B2
DIODE
DIODE
DIODE
DIODE
DIODE
10EDB40-TA1B2
10EDB40-TA1B2
10EDB40-TA1B2
10EDB40-TA1B2
10EDB40-TA1B2
CDX-GT20W/GT200/GT200E/GT200S/GT250S
MAIN
Ref. No.
D759
D760
D761
D762
D903
Part No.
Description
6-500-522-01
6-500-522-01
6-500-522-01
6-500-522-01
6-501-170-01
DIODE
DIODE
DIODE
DIODE
DIODE
Remark
10EDB40-TA1B2
10EDB40-TA1B2
10EDB40-TA1B2
10EDB40-TA1B2
UDZW-TE17-6.8B
JW52
L1
L51
L301
L501
L601
1-500-245-11
1-216-864-11
1-216-864-11
1-216-295-11
1-216-295-11
INDUCTOR, FERRITE BEAD
SHORT CHIP
0
SHORT CHIP
0
SHORT CHIP
0
SHORT CHIP
0
FB307
FB308
FB309
FB310
FB410
1-216-864-11
1-216-295-11
1-216-864-11
1-216-864-11
1-216-864-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
FB410
FB501
FB603
1-414-595-11 INDUCTOR, FERRITE BEAD
(GT200:AEP,UK/GT200S)
1-216-864-11 SHORT CHIP
0 (GT250S)
1-414-595-11 INDUCTOR, FERRITE BEAD
(GT200:AEP,UK/GT200S)
1-216-295-11 SHORT CHIP
0
1-216-295-11 SHORT CHIP
0
FB604
FB605
FB606
1-500-245-11 INDUCTOR, FERRITE BEAD
1-216-864-11 SHORT CHIP
0
1-216-864-11 SHORT CHIP
0
0
0
0
0
0 (GT250S)
Q1
Q22
1-532-877-11 FUSE (BLADE TYPE) (AUTO FUSE) 10A
6-803-747-01
6-708-880-01
6-806-031-03
8-759-659-13
6-705-360-02
TDA7333013TR (GT200:AEP,UK/GT200S)
BD3806AFS-E2
MB90487APF-G-198E1
PST3428UL
TDA8588BJ/N2/R1 (GT250S)
IC750
6-705-360-11 IC TDA8588BJ/N2/R1/M5
(GT200:AEP,UK/GT200S)
8-759-681-42 IC NJM12902V(TE2)
< JACK >
1-815-185-13 JACK (ANTENNA)
1-774-698-11 JACK, PIN 2P (AUDIO OUT REAR)
1-469-844-11
1-216-295-11
1-216-295-11
1-216-295-11
1-456-617-11
1-216-864-11
1-216-864-11
1-216-864-11
1-216-821-11
1-216-864-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
SHORT CHIP
0
0
0
1K
0
JC681
JC753
JC754
JC755
JC756
1-216-864-11
1-216-296-11
1-216-296-11
1-216-296-11
1-216-864-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
0
0
0
0
0
JC795
1-216-864-11 SHORT CHIP
0
5%
1/4W
INDUCTOR
SHORT CHIP
SHORT CHIP
SHORT CHIP
COIL, CHOKE
2.2uH
0 (GT200:AEP,UK/GT200S)
0
0
Q451
Q461
Q471
Q478
Q479
8-729-027-44
8-729-027-44
6-550-752-01
1-801-806-11
8-729-027-23
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
DTC114TKA-T146
DTC114TKA-T146
DTC614TKT146
DTC144EKA
DTA114EKA-T146
Q481
Q580
Q581
Q582
Q631
6-550-752-01
8-729-027-43
1-801-806-11
8-729-120-28
8-729-120-28
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
DTC614TKT146
DTC114EKA-T146
DTC144EKA
2SC1623-L5L6
2SC1623-L5L6
Q651
8-729-120-28 TRANSISTOR 2SC1623-L5L6
(GT200:AEP,UK/GT200S)
8-729-027-23 TRANSISTOR DTA114EKA-T146
< RESISTOR >
R1
R2
R3
R4
R5
1-216-821-11
1-414-595-11
1-414-595-11
1-216-839-11
1-216-843-11
R6
1-216-839-11 METAL CHIP
R7
1-216-843-11
R8
1-216-839-11
R9
1-216-843-11
R12
1-414-595-11
R13
R29
1-414-595-11 INDUCTOR, FERRITE BEAD
1-216-809-11 METAL CHIP
100
5%
1/10W
(GT200:AEP,UK/GT200S)
1-216-797-11 METAL CHIP
10
5%
1/10W
(GT200:AEP,UK/GT200S)
1-216-803-11 METAL CHIP
33
5%
1/10W
(GT200:AEP,UK/GT200S)
1-414-595-11 INDUCTOR, FERRITE BEAD
(GT200:AEP,UK/GT200S)
< JUMPER RESISTOR >
JC1
JC501
JC504
JC527
JC533
4.7K
Q431
Q441
Q664
IC51
IC401
IC501
IC602
IC750
J1
J330
1-249-425-11 CARBON
6-551-431-01 TRANSISTOR 2SC6027T100-QR
1-801-806-11 TRANSISTOR DTC144EKA
(GT200:AEP,UK/GT200S)
8-729-026-49 TRANSISTOR 2SA1037AK-T146-R
(GT200:AEP,UK/GT200S)
8-729-027-44 TRANSISTOR DTC114TKA-T146
8-729-027-44 TRANSISTOR DTC114TKA-T146
Q51
< IC >
IC901
Remark
< TRANSISTOR >
< FUSE >
IC
IC
IC
IC
IC
Description
< COIL >
FB1
FB302
FB303
FB304
FB305
FU601
Part No.
< RESISTOR >
< FERRITE BEAD >
FB411
FB411
Ref. No.
5%
1/10W
R51
R52
R53
METAL CHIP
1K
INDUCTOR, FERRITE BEAD
INDUCTOR, FERRITE BEAD
METAL CHIP
33K
METAL CHIP
68K
5%
1/10W
5%
5%
1/10W
1/10W
5%
1/10W
(GT200:AEP,UK/GT200S)
METAL CHIP
68K
5%
1/10W
(GT200:AEP,UK/GT200S)
METAL CHIP
33K
5%
1/10W
(GT200:AEP,UK/GT200S)
METAL CHIP
68K
5%
1/10W
(GT200:AEP,UK/GT200S)
INDUCTOR, FERRITE BEAD
R54
1-216-845-11 METAL CHIP
R55
1-216-864-11 SHORT CHIP
33K
100K
5%
1/10W
(GT200:AEP,UK/GT200S)
0 (GT200:AEP,UK/GT200S)
25
CDX-GT20W/GT200/GT200E/GT200S/GT250S
MAIN
Ref. No.
R56
R57
R58
R59
R60
Part No.
Description
Remark
1-414-595-11 INDUCTOR, FERRITE BEAD
(GT200:AEP,UK/GT200S)
1-414-595-11 INDUCTOR, FERRITE BEAD
(GT200:AEP,UK/GT200S)
1-216-833-11 METAL CHIP
10K
5%
1/10W
(GT200:AEP,UK/GT200S)
1-216-845-11 METAL CHIP
100K
5%
1/10W
(GT200:AEP,UK/GT200S)
1-216-833-11 METAL CHIP
10K
5%
1/10W
(GT200:AEP,UK/GT200S)
R61
1-216-821-11 METAL CHIP
R301
R302
R401
R405
1-216-821-11
1-216-821-11
1-216-797-11
1-218-881-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
5%
1/10W
(GT200:AEP,UK/GT200S)
1K
5%
1/10W
1K
5%
1/10W
10
5%
1/10W
27K
0.5% 1/10W
R406
R407
R408
R409
R410
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100
100
100
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R411
R431
R432
R441
R442
1-216-809-11
1-216-821-11
1-216-841-11
1-216-821-11
1-216-841-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
1K
47K
1K
47K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R451
R452
R461
R462
R471
1-216-821-11
1-216-841-11
1-216-821-11
1-216-841-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1K
47K
1K
47K
100
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R472
R479
R481
R482
R502
1-216-841-11
1-216-805-11
1-216-809-11
1-216-841-11
1-216-821-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
47K
47
100
47K
1K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R503
R504
R505
R506
R507
1-216-821-11
1-218-871-11
1-218-871-11
1-216-845-11
1-216-845-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1K
10K
10K
100K
100K
5%
0.5%
0.5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
(GT250S)
R508
R509
R510
R511
R512
1-216-864-11
1-216-812-11
1-216-821-11
1-216-821-11
1-216-821-11
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
180
1K
1K
1K
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
R513
R514
R517
R518
R519
1-216-845-11
1-216-845-11
1-216-841-11
1-216-825-11
1-216-845-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
100K
47K
2.2K
100K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R521
R522
R528
R529
R531
1-216-825-11
1-216-825-11
1-216-845-11
1-216-821-11
1-216-845-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
2.2K
2.2K
100K
1K
100K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R532
R533
R534
1-216-845-11 METAL CHIP
1-216-845-11 METAL CHIP
1-216-833-11 METAL CHIP
100K
100K
10K
5%
5%
5%
1/10W
1/10W
1/10W
26
Ref. No.
Part No.
Description
R535
R536
R537
R539
R540
1-216-833-11
1-216-845-11
1-216-845-11
1-216-821-11
1-216-845-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10K
100K
100K
1K
100K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
Remark
R541
R542
R543
R544
R545
1-216-845-11
1-216-821-11
1-216-821-11
1-216-821-11
1-216-845-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
1K
1K
1K
100K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
(GT250S)
R546
1-216-845-11 METAL CHIP
100K
5%
1/10W
(GT250S)
R547
R550
R551
1-216-864-11 SHORT CHIP
1-216-845-11 METAL CHIP
1-216-845-11 METAL CHIP
R556
1-216-833-11 METAL CHIP
0
100K
5%
1/10W
100K
5%
1/10W
(GT200:AEP,UK/GT200S)
10K
5%
1/10W
(GT250S)
R557
R558
1-216-809-11 METAL CHIP
1-216-821-11 METAL CHIP
R561
R563
R564
1-216-845-11 METAL CHIP
1-216-845-11 METAL CHIP
1-216-845-11 METAL CHIP
R565
R566
R567
R568
1-216-845-11
1-216-845-11
1-216-845-11
1-216-821-11
R570
1K
100
1K
5%
5%
100K
100K
100K
1K
5%
5%
5%
5%
1-216-817-11 METAL CHIP
470
5%
R573
1-216-845-11 METAL CHIP
R575
R577
R578
R582
1-216-845-11
1-216-845-11
1-216-821-11
1-216-821-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
5%
1/10W
(GT200:AEP,UK/GT200S)
100K
5%
1/10W
100K
5%
1/10W
1K
5%
1/10W
1K
5%
1/10W
R583
R584
R585
R601
R609
1-216-821-11
1-216-841-11
1-216-849-11
1-216-845-11
1-216-821-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1K
47K
220K
100K
1K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R631
R632
R633
R634
R636
1-249-425-11
1-216-841-11
1-216-841-11
1-216-829-11
1-216-845-11
CARBON
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
4.7K
47K
47K
4.7K
100K
5%
5%
5%
5%
5%
1/4W
1/10W
1/10W
1/10W
1/10W
R651
1-216-821-11 METAL CHIP
R652
1-216-841-11 METAL CHIP
R653
1-216-833-11 METAL CHIP
R654
1-216-833-11 METAL CHIP
R661
1-216-821-11 METAL CHIP
5%
1/10W
(GT200:AEP,UK/GT200S)
47K
5%
1/10W
(GT200:AEP,UK/GT200S)
10K
5%
1/10W
(GT200:AEP,UK/GT200S)
10K
5%
1/10W
(GT200:AEP,UK/GT200S)
1K
5%
1/10W
R662
R663
R664
R671
1-216-845-11
1-216-821-11
1-216-845-11
1-216-809-11
100K
1K
100K
100
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1/10W
1/10W
(GT250S)
100K
5%
1/10W
100K
5%
1/10W
100K
5%
1/10W
(GT200:AEP,UK/GT200S)
1/10W
1/10W
1/10W
1/10W
(GT250S)
1/10W
1K
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
CDX-GT20W/GT200/GT200E/GT200S/GT250S
MAIN
Ref. No.
SENSOR
SERVO
Part No.
Description
Remark
Ref. No.
Part No.
Description
R672
R673
R674
R675
R676
1-216-809-11
1-216-833-11
1-216-845-11
1-216-821-11
1-216-821-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
10K
100K
1K
1K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
C14
C15
C16
C17
C18
1-104-609-11
1-125-777-11
1-162-964-11
1-125-777-11
1-125-777-11
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
100uF
0.1uF
0.001uF
0.1uF
0.1uF
20%
10%
10%
10%
10%
4V
10V
50V
10V
10V
R677
R679
R681
R691
R692
1-216-821-11
1-216-821-11
1-216-864-11
1-216-845-11
1-216-845-11
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
1K
1K
0
100K
100K
5%
5%
1/10W
1/10W
5%
5%
1/10W
1/10W
C19
C20
C22
C23
C24
1-125-777-11
1-164-677-11
1-164-677-11
1-125-777-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.033uF
0.033uF
0.1uF
0.1uF
10%
10%
10%
10%
10%
10V
16V
16V
10V
10V
R694
1-216-821-11 METAL CHIP
R752
R756
R757
R901
1-216-811-11
1-216-841-11
1-216-864-11
1-216-817-11
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
5%
1/10W
(GT200:AEP,UK/GT200S)
150
5%
1/10W
47K
5%
1/10W
0
470
5%
1/10W
C25
C26
C29
C30
C31
1-125-777-11
1-162-966-11
1-162-968-11
1-162-968-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.0022uF
0.0047uF
0.0047uF
0.1uF
10%
10%
10%
10%
10%
10V
50V
50V
50V
10V
R902
R903
R904
R905
R906
1-216-817-11
1-216-834-11
1-216-834-11
1-216-841-11
1-216-841-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
470
12K
12K
47K
47K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
C32
C33
C36
C39
C40
1-125-777-11
1-125-777-11
1-125-777-11
1-126-208-21
1-126-395-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
ELECT CHIP
0.1uF
0.1uF
0.1uF
47uF
22uF
10%
10%
10%
20%
20%
10V
10V
10V
4V
16V
R907
R910
R911
R912
R913
1-216-845-11
1-216-789-11
1-216-825-11
1-216-864-11
1-216-864-11
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
SHORT CHIP
100K
2.2
2.2K
0
0
5%
5%
5%
1/10W
1/10W
1/10W
C41
C42
C43
C44
C45
1-125-777-11
1-125-777-11
1-100-567-81
1-125-777-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.01uF
0.1uF
0.1uF
10%
10%
10%
10%
10%
10V
10V
25V
10V
10V
R914
1-216-825-11 METAL CHIP
2.2K
5%
1/10W
C46
C47
C48
C49
C50
1-162-923-11
1-164-245-11
1-100-567-81
1-125-777-11
1-100-567-81
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
47PF
0.015uF
0.01uF
0.1uF
0.01uF
5%
10%
10%
10%
10%
50V
25V
25V
10V
25V
C51
C52
C53
C54
C55
1-125-777-11
1-125-777-11
1-125-777-11
1-100-567-81
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.1uF
0.01uF
0.1uF
10%
10%
10%
10%
10%
10V
10V
10V
25V
10V
C56
C58
C60
C62
C66
1-164-245-11
1-125-777-11
1-162-964-11
1-125-777-11
1-100-567-81
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.015uF
0.1uF
0.001uF
0.1uF
0.01uF
10%
10%
10%
10%
10%
25V
10V
50V
10V
25V
C67
C68
C69
C70
C71
1-100-567-81
1-100-567-81
1-100-567-81
1-125-777-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
0.01uF
0.01uF
0.1uF
0.1uF
10%
10%
10%
10%
10%
25V
25V
25V
10V
10V
C72
C80
C132
C133
1-125-777-11
1-125-837-11
1-125-837-11
1-125-837-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
1uF
1uF
1uF
10%
10%
10%
10%
10V
6.3V
6.3V
6.3V
1K
< SWITCH >
S502
S702
1-571-478-11 SWITCH, SLIDE (FREQUENCY SELECT)
(GT250S)
1-692-431-21 SWITCH, TACTILE (RESET)
< TUNER UNIT >
TU1
Remark
A-3220-961-B TUNER UNIT (TUX-032)
< VIBRATOR >
X51
1-813-173-11 VIBRATOR, CRYSTAL (8.664MHz)
(GT200:AEP,UK/GT200S)
X501
1-813-524-21 VIBRATOR, CERAMIC (18.432MHz)
X502
1-813-202-11 VIBRATOR, CRYSTAL (32.768kHz)
*************************************************************
SENSOR BOARD
**************
< SWITCH >
SW2
1-529-566-61 SWITCH, PUSH (1 KEY) (SELF)
SW3
1-529-566-61 SWITCH, PUSH (1 KEY) (DISC IN)
*************************************************************
< CONNECTOR >
A-1132-412-A SERVO BOARD, COMPLETE
**********************
CN1
CN2
1-691-380-61 CONNECTOR, FFC/FPC (ZIF) 16P
1-817-275-21 CONNECTOR, BOARD TO BOARD 28P
< CAPACITOR >
< JUMPER RESISTOR >
C7
C10
C11
C12
C13
1-125-777-11
1-126-208-21
1-125-777-11
1-125-777-11
1-100-567-81
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
47uF
0.1uF
0.1uF
0.01uF
10%
20%
10%
10%
10%
10V
4V
10V
10V
25V
FB2
FB3
FB4
1-216-864-11 SHORT CHIP
1-216-864-11 SHORT CHIP
1-216-864-11 SHORT CHIP
0
0
0
27
CDX-GT20W/GT200/GT200E/GT200S/GT250S
SERVO
Ref. No.
Part No.
Description
Remark
< IC >
IC1
IC2
IC3
IC6
6-707-327-01
6-708-729-01
6-806-019-02
6-708-728-01
IC
IC
IC
IC
BA5968FP-E2
TC94A70FG-002
MB90486BPFV-G-177E1
BH15LB1WG
< TRANSISTOR >
Q2
Q3
Q21
6-551-120-01 TRANSISTOR 2SA2119K
8-729-928-90 TRANSISTOR DTC114EE
8-729-904-87 TRANSISTOR 2SB1197K-R
< RESISTOR >
R1
R2
R5
R6
R7
1-218-965-11
1-218-977-11
1-218-969-11
1-218-969-11
1-218-990-81
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
SHORT CHIP
10K
100K
22K
22K
0
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
R8
R9
R10
R11
R12
1-218-965-11
1-218-965-11
1-218-990-81
1-218-941-81
1-218-969-11
RES-CHIP
RES-CHIP
SHORT CHIP
RES-CHIP
RES-CHIP
10K
10K
0
100
22K
5%
5%
1/16W
1/16W
5%
5%
1/16W
1/16W
R13
R14
R15
R16
R17
1-218-969-11
1-218-929-11
1-218-929-11
1-218-953-11
1-218-990-81
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
SHORT CHIP
22K
10
10
1K
0
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
R18
R19
R20
R21
R22
1-218-941-81
1-218-935-11
1-162-961-11
1-218-941-81
1-218-977-11
RES-CHIP
RES-CHIP
CERAMIC CHIP
RES-CHIP
RES-CHIP
100
33
330PF
100
100K
5%
5%
10%
5%
5%
1/16W
1/16W
50V
1/16W
1/16W
R23
R24
R25
R26
R27
1-218-977-11
1-218-977-11
1-218-977-11
1-218-977-11
1-218-977-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
100K
100K
100K
100K
100K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R28
R29
R30
R31
R32
1-218-945-11
1-218-989-11
1-218-989-11
1-218-989-11
1-218-947-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
220
1M
1M
1M
330
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R33
R34
R35
R36
R37
1-218-990-81
1-216-864-11
1-162-961-11
1-218-947-11
1-218-947-11
SHORT CHIP
SHORT CHIP
CERAMIC CHIP
RES-CHIP
RES-CHIP
0
0
330PF
330
330
10%
5%
5%
50V
1/16W
1/16W
R38
R39
R40
R41
R42
1-218-941-81
1-218-941-81
1-218-941-81
1-218-941-81
1-218-977-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
100
100
100
100
100K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R43
R44
R52
R53
R54
1-218-961-11
1-218-977-11
1-218-962-11
1-218-979-11
1-218-990-81
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
SHORT CHIP
4.7K
100K
5.6K
150K
0
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
28
Ref. No.
Part No.
Description
R55
R57
R58
R60
R61
1-218-973-11
1-218-967-11
1-218-969-11
1-218-941-81
1-218-941-81
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
47K
15K
22K
100
100
5%
5%
5%
5%
5%
Remark
1/16W
1/16W
1/16W
1/16W
1/16W
R62
R63
R64
R65
R67
1-218-941-81
1-218-977-11
1-218-977-11
1-218-977-11
1-218-941-81
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
100
100K
100K
100K
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R68
R69
R70
R71
R72
1-218-941-81
1-218-941-81
1-218-965-11
1-218-973-11
1-218-973-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
100
100
10K
47K
47K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R73
R74
R75
R77
R78
1-218-973-11
1-218-941-81
1-218-941-81
1-218-973-11
1-218-941-81
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
47K
100
100
47K
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R79
R80
R81
R82
R83
1-218-941-81
1-218-941-81
1-218-941-81
1-218-941-81
1-218-977-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
100
100
100
100
100K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R84
R85
R86
R87
R96
1-218-941-81
1-218-977-11
1-218-941-81
1-218-977-11
1-218-941-81
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
100
100K
100
100K
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R97
R98
R132
R133
R141
1-220-200-81
1-218-971-11
1-218-969-11
1-218-953-11
1-216-864-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
SHORT CHIP
30K
33K
22K
1K
0
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
R144
R147
1-216-864-11 SHORT CHIP
1-216-864-11 SHORT CHIP
0
0
< SWITCH >
SW1
1-529-565-61 SWITCH, PUSH (1 KEY) (DOWN)
< VIBRATOR >
X1
1-813-678-11 OSCILLATOR, CERAMIC (CHIP TYPE) (12MHz)
X2
1-795-561-21 VIBRATOR, CERAMIC (16.9344MHz)
*************************************************************
CDX-GT20W/GT200/GT200E/GT200S/GT250S
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
PARTS FOR INSTALLATION AND CONNECTIONS
***************************************
MISCELLANEOUS
***************
1-776-206-21 CORD (WITH CONNECTOR) (POWER) (GT250S)
1-776-527-61 CORD (WITH CONNECTOR) (ISO) (POWER)
(GT200:AEP,UK/GT200S)
1-780-199-11 CONDUCTIVE BOARD, CONNECTION
8-820-207-12 OPTICAL PICK-UP (KSS1000E/K1RP)
A-1075-645-A CHASSIS (OP) SUB ASSY (including M901)
301
302
303
304
305
X-3382-647-1
2-633-239-01
3-246-471-01
X-3381-154-1
X-3382-926-1
FRAME ASSY, FITTING
COLLAR
KEY (FRAME)
SCREW ASSY (BS4), FITTING (GT250S)
SCREW ASSY (BS), FITTING
(GT200:AEP,UK/GT200S)
LCD901 1-805-919-11 DISPLAY PANEL, LIQUID CRYSTAL
M902
A-3372-447-A MOTOR ASSY, SL (SLED)
M903
A-1166-300-A MOTOR ASSY (B), LE (LOADING)
RE901 1-478-474-12 ENCODER, ROTARY (PUSH/SELECT VOLUME)
SW4
1-571-099-11 SWITCH (1 KEY) (LIMIT)
*************************************************************
306
307
308
309
3-349-410-11
1-465-459-31
1-776-206-21
1-776-527-61
BUSHING
ADAPTOR, ANTENNA (GT200:AEP,UK/GT200S)
CORD (WITH CONNECTOR) (POWER) (GT250S)
CORD (WITH CONNECTOR) (ISO) (POWER)
(GT200:AEP,UK/GT200S)
7
7
56
0 153
154
ACCESSORIES
************
1-479-077-13 REMOTE COMMANDER (RM-X151) (GT250S)
2-548-729-01 LID, BATTERY CASE (for RM-X151) (GT250S)
2-669-721-11 MANUAL, INSTRUCTION (ENGLISH,GERMAN,
FRENCH,ITALIAN,DUTCH)
(GT200:AEP,UK/GT200S)
2-669-721-41 MANUAL, INSTRUCTION (ENGLISH,SPANISH,
SIMPLIFIED CHINESE)
(GT250S)
2-669-722-12 MANUAL, INSTRUCTION, INSTALL (ENGLISH,
GERMAN,FRENCH,ITALIAN,DUTCH)
(GT200:AEP,UK/GT200S)
301
302
303
×2
304
305
306
×4
307
308
309
2-669-722-41 MANUAL, INSTRUCTION, INSTALL (ENGLISH,
SPANISH,SIMPLIFIED CHINESE)
(GT250S)
X-2055-358-1 CASE ASSY (for FRONT PANEL)
*************************************************************
29
CDX-GT20W/GT200/GT200E/GT200S/GT250S
REVISION HISTORY
Clicking the version allows you to jump to the revised page.
Also, clicking the version at the upper on the revised page allows you to jump to the next revised page.
Ver.
1.0
1.1
1.2
30
Date
2005. 09
2006. 02
2006. 03
Description of Revision
New
Production country change. (Supplement-1)
Chinese model addition of CDX-GT250S.
(ENG-06001)