Download Craftsman 917.28862 Operator`s manual
Transcript
Operator's Manual ! RnFTSM.N°I LAWN TRACTOR 21.0 HP,* 46" Mower Electric Start Automatic Transmission Model No. 917.28862 • Espa_ol, p. 33 This product has a low emission engine which operates differently from previously built engines. Before you start the engine, read and understand this Operator's Manual. IMPORTANT: Read and follow all Safety Rules and Instructions before operating this equipment. For answers to your questions aboutlhis product, Call: 1-800-659-5917 SEARS Craftsman 5 am - 5 pro, Mon- Help Line Sat Gasoline containing up to 10% ethanol (EIO) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (EIO) will void the product warrant,#. Esta m_quina puede utilizer gasotlna con un contenido de haste el 10% de etanol (EIO). El uso de una gasolina que supere el 10% de etanol (EIO) anulard [a garanUa del produoto. Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A. Visit our Craftsmanwebsite:www.sears.comicraftsman *As ratedbythe engine rnanufae, urer 446208 Warranty .................................................. 2 Safety Rules ............................................ 3 Product Specifications ............................. 6 Assembly/Pre-Operation ......................... 7 Operation ................................................. 9 Maintenance Schedule .......................... ! 6 Maintenance .......................................... 16 Service and Adjustments ....................... 21 Storage .................................................. 27 Troubleshooting ..................................... 28 Sears Service ......................... Back Cover Craftsman Riding Equipment Warranty CRAFTSMAN FULL WARRANTY FOR TWO YEARS from the date of purchase, aI] non-expendable parts of this riding equipment are warranted against any defects in material or workmanship. A defective non-expendable part will receive free in-home repair or replacement if repair is impossible. FOR FIVE YEARS from the date of purchase, the frame and front axle of this riding equipment are warranted against any defects in material or workmanship. A defective frame or front axle wUireceive free in-home repair or replacement if repair is impossible. FOR 90 DAYS from the date of purchase, the battery (an expendable part) of this riding equipment is warranted against any defects in material or workmanship (our testing proves that it will not hold a charge). A defective battery will receive free in-home replacement. ADDITIONAL LIFETIME LIMITED WARRANTY on CAST IRON FRONT AXLE (if equipped) FOR AS LONG AS IT IS USED bythe original owner after the frfth year from the date of purchase, the cast iron front axle (if equipped) of this riding equipment is warranted against any defects in matedaI or workmanship. With proof of purchase, a defective cast front axle wilI receive free in-home replacement. WARRANTY SERVICE For warranty coverage details to obtain free repair or replacement, call 1-800-659-5917 or visit the web site: www.craftsman.com In al! cases above, if part repair or replacement is impossible, the riding equipment wilI be replaced free of charge with the same or an equivalent model. All of the above warranty coverage is void if this riding equipment is ever used while providing commercial services or if rented to another person. This warranty covers ONLY. defects in material and workmanship. Warranty coverage does NOT include: • Expendable parts (except battery) that can wear out from normal use within the warranty period, including but not limited to bEades,spark plugs, air cleaners, belts, and oil filters. • Standard maintenance servicing, oiI changes, or tune-ups. ° Tire replacement or repair caused by punctures from outside objects, such as nails, thorns, stumps, or glass. • Tire or wheel replacement or repair resulting from normal wear, accident, or improper operation or maintenance. • Repairs necessary because of operator abuse, including but not limited to damage caused by towing objects beyond the capability of the riding equipment, impacting objects that bend the frame, axle assembiy or crankshaft, or over-speeding the engine. - Repairs necessary because of operator negligence, including but not limited to, electrical and mechanical damage caused by improper storage, failure to use the proper grade and amount of engine oil, failure to keep the deck clear of flammable debris, or failure to maintain the riding equipment according to the instructions contained in the operator's manual. • Engine (fuel system) cleaning or repairs caused byfue[ determined to be contaminated or oxidized (stale). In general, fuel should be used within 30 days of its purchase date. • Normal deterioration and wear of the exterior finishes, or product label replacement. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears Brands Management Corporation, Hoffman 2 Estates, IL 60179 _DANGER: This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. _kWARNING: In orderto preventaccidentat starting when setting up, transporting, adjusting or making repairs, always disconnect spark plug wire and place wire where it cannot contact spark plug. • A(_WARNING: Do not coast down a hillin neutral, you may lose control of the tractor. • Never direct discharged materialtoward anyone. Avoid discharging material against a wall or obstruction. Material may ricochet back toward the operator. Stop the blades when crossing gravel surfaces. ..... _,WARNING: Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your tractor. Use common sense when towing. Operate only at the lowest possible speed when on a slope. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor. _,WARNING: Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. • qkWAR NING: Battery posts,terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. I. GENERAL OPERATION • Read, understand, and follow all instructions on the machine and in the manual before starting. • Do not put hands or feet near rotating parts or under the machine. Keep clear of the discharge opening at atl times. • Only allow responsible adults, who are familiar with the instructions, to operate the machine. • Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blades. • Be sure the area is clear of bystanders before operating. Stop machine ifanyone enters the area. • Never carry passengers. • Do not mow in reverse unless absolutely necessary. Always look down and behind before and while backing. Do not operate machine without the entire grass catcher, discharge chute, or other safetydevices inplace andworking. • Slow down before turning. o Never leave a running machine unattended. Always turn off blades, set parking brake, stop engine, and remove keys before dismounting. • Disengage blades when not mowing. Shut off engine and wait for all parts to come to a complete stop before cleaning the machine, removing the grass catcher, or unclogging the discharge chute. • Operate machine only indaylight or good artificial light. • Do not operate the machine while under the influence of alcohol or drugs. • Watch for traffic when operating near or crossing roadways. • Useextra care when Ioadingor unloading the machine into a trailer or truck. • AIwaysweareye protectionwhenoperating machine. • Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower-related injuries. These operators should evaluate their ability to operate the riding mower safely enough to protectthemselves and others from serious injury. • Followthe manufacturer's recommendation for wheelweights or counterweights. • Keep machine free of grass, leaves or other debris build-up which can touch hot exhaustt engine parts and burn. Do not allow the mower to plow leaves or other debris which can cause build-up to occur. Clean any oil or fuel spillage before operating or storing the machine. Allow machine to coot before storage. !1.SLOPE OPERATION Slopes are a major factor related to loss of control and tip-over accidents, which can result in severe injury or death. Operation on all slopes requires extra cautien, tf you cannot back upthe slope or if you feel uneasy on it, do not mow it. - Mow up and down slopes, not across. • Watch for holes, ruts, bumps, rocks, or other hidden objects. Uneven terrain could overturn the machine. Tall grass can hide obstacles. • Choose a low ground speed so that you will not have to stop or shift while on the slope. Q Do not mow on wet grass. Tires may lose traction, Always keep the machine in gear when going down slopes. Do notshiftto neutral and coast downhill. Avoid starting, stopping, or turning on a slope. Ifthetireslosetraction, disengage the blades and proceed slowly straight down the slope. - Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction, which could cause the machine to roll over. * Use extra care while operating machine with grass catchers or other attachments; they can affect the stability of the machine. Do no use on steep slopes. • Do not try to stabilize the machine by putting your foot on the ground, . Do not mow near drop-offs, ditches, or embankments, The machine could suddenly roll over if a wheel is over the edge or if the edge caves in. Iil, CHILDREN _WARNING: BY THIS CHILDREN CAN BE INJURED EQUIPMENT. The American Acade- my of Pediatrics recommends that children be a minimum of 12 year of age before operating a pedestrian controlled lawn mower and a minimum of 16 years of age before operating a riding lawn mower. Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them. • Keep children out of the mowing area and inthe watchful care of a responsible adult other than the operator, • Be alert and turn machine off if a child enters the area. • Before and while backing, look behind and down for small children. • Never carry children, even withthe blades shutoff. They may fa!l off and be seriously injured or interfere with safe machine operation, Children who have been given rides in the past may suddenly appear in the mowing area for another ride and be run over or backed over by the machine. ° Never allow children to operate the machine. • Use extra care when approaching blind corners, shrubs, trees, or other objects that may block your view of a child. IV. TOWING - Tow only with a machine that has a hitch designed for towing. Do not attach towed equipment except at the hitch point. ° Followthe manufacturer's recommendation for weight limits for towed equipment and towing on slopes. • Never allow children or others in or on towed equipment. ° Onslopes, theweightofthetowedequipment may cause loss of traction and loss of control. • Travel slowly and allow extra distance to stop. V. SERVICE SAFE HANDLING OF GASOLINE To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. • Extinguish all cigarettes, cigars, pipes, and other sources of ignition. • Use only approved gasoline container. • Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling. • Never fuel the machine indoors. • Neverstorethemachineorfuelcontainer where there is an open flame, spark, or pilot light such as on a water heater or other appliances. , Never fill containers inside a vehicle or on a truck or trailer bed with plastic liner. Always place containers on the ground away from your vehicle when filling. • Remove gas-powered equipment from . thetruckortrailerandrefuel it onthe ground. Ifthisisnotpossible, thenrefuel • such equipment withaportable container, rather thanfroma gasoline dispenser nozzle. • Keep thenozzle incontact withtherim • ofthefueltankorcontainer opening at alltimesuntil fueling iscomplete. Donot • useanozzle lock-open device. • iffuefisspilled onclothing, changecloth• ingimmediately. • Never overfill fueltank. Replace gas cap and tighten securely. GENERAL SERVICE • • • • • • • Never operate machine inaclosed area. Keep all nuts and bolts tightto be surethe equipment is in safe working condition. Maintain or replace safety and instruction labels, as necessary. Be sure the area is clear of bystanders before operating. Stopmachine ffanyone enters the area. Never carry passengers. Do not mow in reverse unless absolutely necessary. Always look down and behind before and while backing. Never carry children, even with the blades shut off. They may fall off and be seriously injured or interfere with safe machine operation. Children who have been given rides inthe past maysuddenly appear in the mowing area for another ride and be run over or backed over by the machine, Keep children out of the mowing area and inthe watchful care of a responsible adult other than the operator. • • Nevertamperwithsafetydevices, Check their proper operation regularly. Keep machine free of grass, leaves, or other debris build-up. Clean oil or fuel spillage and remove any fuel-soaked debris. Allow machineto cool beforestoring. If you strike a foreign object, stop and inspectthe machine. Repair, ffnecessary, before restarting. Never make any adjustments or repairs with the engine running. Checkgrass catchercomponentsand the discharge chute frequently and replace with manufacturer's recommended parts, when necessary. Mower blades aresharp. Wrap the blade or wear gloves, and use extra caution when servicing them. Checkbrakeoperationfrequently. Adjust and service as required. • Be alert and turn machine off if a child enters the area. • Before and while backing, look behind and down for small children. • Mow up and down slopes (15° Max), not across. • Choose a low ground speed so that you will not have to stop or shift while on the slope. • Avoid starting, stopping, or turning on a slope. Ifthetires losetraction, disengage the blades and proceed slowly straight down the slope. • If machine stops while going uphill, disengage blades, shift into reverse and back down slowly. • Do notturn on slopes unless necessary', and then, turn slowly and gradually downhill, if possible. • When loading or unloadingthis machine, do not exceed the maximum recommended operation angle of t5 °. .... PRODUCT S PECIFICATIONS Gasoline Capacity and type: 3.0 Gailons/11,35 L Regular Unleaded Oil Type: (APh SG-SL) SAE30 (above 32°F/0°C) SAE 5W30 (below 32_F10°C) Oit Capacity; W/Filter: W/out Filter: Spark Plug: Champion RC12YC (Gap; .030"/0.76 mm) Ground Speed (Mph/Kph): Forward: Reverse: Charging System: 3 Amps Battery 5 Amps Headlights Battery: Amp/Hr: Min. CCA: Case size: Blade Bolt Torque: Inthe state of Californiathe above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is availablethrough your nearest Sears service center (See REPAIR PARTS manual). 56 Oz.!! ,65 L 48 Oz./1,4 L REPAIR PROTECTION AGREEMENTS Congratulations on making a smart purchase. Your new Craftsman® product is designed and manufactured for years of dependable operation. But like all products, it may require repair from time totime. That's when having a Repair Protection Agreement can save you money and aggravation. Purchase a Repair Protection Agreement now and protect yourseff from unexpected hassle and expense. 0 - 5.2/8,4 0 - 2.9/4,7 28 230 U1R 45-55 Ft, Lbs.i62-75 Nm CONGRATULATIONS on your purchase of a new tractor. It has been designed, engineeredand manutacturedto give you the best possible dependability and performance. Should you experience any problem you cannot easily remedy, please contact a Sears or other qualified service center. We have competent, well-trained representatives and the proper tools to service or repair this tractor, Please read and retain this manual. The instructions will enable you to assemble and maintain your tractor properly. Always observe the "SAFETY RULES". CUSTOMER Here's what's included in the Agreement: • Expertservice byour 12,000professional repair specialists. • Unlimited service and no charg.efor parts and labor on all covered repairs. • Product replacement if your covered product can't be fixed. • Discount of 10% from regular price of service and service-related parts not covered bythe agreement; also, 10% off regular price of preventive maintenance check, , Fast help by phone - phone support from a Sears representative on products requiring in-home repair,plusconvenient repair scheduling, RESPONSIBILITIES • Read and observe the safety rules. • Follow a regularschedule in maintaining, caring for and using your tractor. • Follow instructions under "Maintenance" and "Storage" sections of this manual. • Wear proper Personal Protective Equipment (PPE) while operating this machine, including (at a minimum) sturdy footwear, eye protection, and hearing protection. Do not mowinshorts and/oropentoedfootwear. • Always let someone knowyou are outside mowing. Once you purchase theAgreement, asimpie phone call is all that ittakes for you to schedule service. Youcan call anytime day or night, or schedule a service appointment online. Sears has over 12,000 professional repair specialists, who have access to over 4.5 million quality parts and accessories. That's the kind of professionalism you can count on to help.prolong the life of your new purchase for years to come, Purchase your Repair Protection Agreement today! Some limitations and exclusions apply. For prices and additional information call 1-800-827-6655. _WARNING: This tractor is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-covered or grasscovered land unless the engine's exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any), If a spark arrester is used, it should be maintained in effective working order by the operator. SEARS INSTALLATION SERVICE For Sears professional installation of home appliances, garage door openers, water heaters, and other major home items, inthe U.S.A. call 1-800-4-MY-HOME® 6 ,ll i Slope Keys Sheet (2) Keys lllllllllllll,lll ill illill Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. TOOLS REQUIRED FOR ASSEMBLY A socket wrench set will make assembly easier. Standard wrench sizes are listed. (1) 1/2" wrench Tire pressure gauge (2) 7/16" wrenches Utility knife Pliers abel When right or left hand is mentioned in this manual,itmeans when you are inthe operating position (seated behind the steering wheel). TO REMOVE TRACTOR FROM CARTON UNPACK CARTON • Remove all accessible loose parts and parts cartons from carton. • Cut along dotted lines on all four panels of carton. Remove end panels and lay side panels flat. , Check for any additional loose parts or cartons and remove. BEFORE REMOVING FROM SKID TO ADJUST SEAT • Sit in seat. Lift up adjustment lever (A) and slide seat until a comfortable position is reached which allows you to press clutch!brake pedal all the way down. • Release lever to lock seat in position. TRACTOR :: :_: TO CHECK BATTERY 1. Lift hood to raised position. NOTE: Ifthis batteryis putinto service after month and year indicated on label (label is located between terminals) charge battery for minimumof one hourat 6-10 amps. (See "BATTERY" in Maintenance section of this manual for charging instructions). • For battery andbattery cable installation see "REPLACING BATTERY" in the "Service and Adjustments" section in this manual 7 NOTE: You may now roll your tractor off the skid. Follow the appropriate instruction below to remove the tractorfrom the skid. _WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual, Ensure tractor is in a well-ventilated area. Ensure the area in front of tractor is clear of other people and objects. TO ROLL TRACTOR OFF SKID (See Operation section for location and function of controls) 1. Raise attachment lift lever to its highest position. 2. Release parking brake by depressing clutch/brake pedal. 3. Place freewheel control in "transmission disengaged position" (See "TO TRANSPORT" inOperation sectionofthis manual). 4. Roll tractor forward off skid. 5. Remove banding holding the deflector shield up against tractor. Continue with the instructionsthat follow. CHECK TIRE PRESSURE The tires on yourtractorwere overinflatedat the factory for shipping purposes. Correct tire pressure is important for best cutting performance. • Reduce tire pressure to PSI shown on tires. CHECK DECK LEVELNESS For best cutting results, mower housing should be properly leveled. See "TO LEVEL MOWER" in the Service and Adjustments section of this manual. CHECK FOR PROPER POSITION OF ALL BELTS See the figures that are shown for replacing motion and mower blade drive belts in the Service andAdjustments section of this manual. Verify that the belts are routed correctly, CHECK BRAKE SYSTEM After you learn how to operate your tractor, check to see that the brake is operating properly. See "TO CHECK BRAKE" in the Service and Adjustments section of this manual, t_CHECKLIST Before you operate your new tractor, we wish to assure that you receive the best performance and satisfaction from this Quality Product. Please review the following checklist: All assembly instructions have been completed. I/" No remaining loose parts in carton. _" Battery is properly prepared and charged. J" Seat is adjusted comfortably and tightened securely. J" All tires are properly inflated. (For shipping purposes, thetires were ovednflated at the factory). _" Be sure mower deck is properly leveled side-to-sideifront-to-rear for best cutting results. (Tires must be properly inflated for leveling). J" Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers. J" Check wiring. See that all connections are still secure and wires are properly clamped. v/ Before driving tractor, be sure freewheel control is in "transmission engaged" position (see "TO TRANSPORT" in the Operation section of this manual), While learning howto useyour tractor, payextra attention to the following important items: _/" Engine oil is at proper level. J" Fueltank is filled with fresh, clean, regular unleaded gasoline. J" Become familiar with all controls, their location and function. Operate them before you start the engine. J' Be sure brake system is insafe operating condition. _" Be sure Operator Presence System and Reverse Operation System (ROS) are working properly (Seethe Operation and Maintenance sections in this manual). J" tt is important to purge the transmission before operating your tractor for the first time. Follow proper starting and transmission purging instructions (See "TO START ENGINE" and "PURGE TRANSMISSION" in the Operation section of this manual). These symbols mayappear onyourtractor orinliterature supplied withtheproduct, Learn and understand their meaning, R N REVERSE ENGINE LIGHTS H NEUTRAL OFF REVERSE OPERATION SYSTEM (ROE) ON FUEL ENGINE SAVagERY I\! L NIGH CHOKE LOW ON ENGINE REVERSE PARKING START FORWARD FAST BRAKE CRUISE SLOW IGNmON MOWER CONTROL HEIGHT Swi"rCH MOWER CLUTCHIB LIFT RAKE PEDAL ............ ATTACHMENT CLUTCH DISENGAGED ATTACHMENT CLUTCH ENGAGED DANGER, KEEP HANDS AND FEET AWAY KEEP AREA CLEAR SLOPE HAZARDS (SEESAFETYRULESSECTION) DANGER which, will result indicates in death aorhazard serious injury.if net avoided, _lb FREE (Automatic ARNING hazard which, if not avoided, could result indicates In deatha or serious injury. V_HEEL Models ortly} & Failure to follow instructions could result in serious injury or death. The safety alert symbol is used to identify safety information about hazards which can result in death, serious injury and/or property damage. CAUTlON indicates a, hazard which, injury. tf not avoided, might result in minor or moderate CAUTION when used without the a|srt symbol, indicates a situation that could result in damage to the tractor and/or engine. HOT SURFACES indicates a hazard which if not avoided could result in death, serious injury and/or property damage. FIRE indicates a haZard which, if nDt avoided, could result in death, serious injury and/or property damage. KNOW YOUR TRACTOR READ THIS MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrationswith your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. 03t_ Our tractors conform to the applicable safety standards of the American National Standards Institute, (A) ATTACHMENT LIFT LEVER - Used to raise and lower the mower or other attachments mounted to your tractor. (B) CLUTCH!BRAKE PEDAL - Used for declutching and braking the tractor and starting the engine. (C) PARKING BRAKE- Locks clutch/brake pedal into the brake position. (D) THROTTLE/CHOKE CONTROL- Used for starting and controrling engine speed. (E) ATFACHM ENTCLUTOH LEVER- Used to engagethe mower blades, or other attachments mounted to your tractor. (F) IGNITION SWITCH - Used for starting and stopping the engine. (G) REVERSE OPERATION SYSTEM (ROS) "ON" POSITION - Allows operation of mower or other powered attachment while in reverse. (H) LIGHT SWITCH - Turns the headlights on and off. (J) MOTION CONTROL LEVER - Selects the speed and direction of tractor, (M) FREEWHEEL CONTROL- Disengages transmission for pushing or slowlytowing the tractor with the engine off, 10 The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend standard safety glasses or a wide vision safety mask worn over spectacles. NOTE: Failure to move throttle control between half and full speed (fast) position,before stopping, may cause engine to"backfire". • Turn ignition key (F) to "STOP" position and remove key. Always remove keywhen leavingtractor to prevent unauthorized use. • Never use choke to stop engine. IMPORTANT: Leaving the ignition switch in any position otherthan "STOP" willcausethe battery to discharge and go dead. NOTE: Undercertain conditions when tractor is standing idle with the engine running, hot engine exhaust gases may cause "browning" of grass, To eliminate this possibility, always stop engine when stopping tractor on grass areas, _CAUTION: Always stop tractor completely, as described above, before leaving the operator's pos_ion. HOW TO USE YOUR TRACTOR TO SET PARKING BRAKE Your tractor is equipped with an operator presence sensing switch. When engine is running, any attempt bythe operator to leave theseat withoutfirst setting the parking brake will shut off the engine. 1. Depress clutch/brake pedal (B) all the way down and hold. 2. Pull parkingbrake lever (C) up and hold, release pressure from clutch/brake pedal (B), then releaseparking brake lever. Pedalshould remain in brake position. Ensure parking brake wil! hold tractor secure, TO USE THROTTLE CONTROL (D) Always operate engine at full speed (fast). • Operating engine at less than full speed (fast)reducesengine's operating efficiency, • Full speed (fast) offers the best mower performance, STOPPING MOWER BLADES • To stop mower blades, move attachment clutch control to disengaged position (t_). (1'_'1) Attachment Clutch Control "Engaged .... {1"_) Attachment Clutch Control Disengaged" GROUND DRIVE • Tostop ground drive, depress brake pedal all the way down, • Move motion control lever to neutral position, ENGINE - Movethrottle control (D) between hatfand full speed (fast) position, 11 TO MOVE FORWARD AND BACKWARD The direction and speed of movement is controlled by the motion control lever. (J) 1. Start tractor with motion control lever in neutral position. 2. Release parking brake. 3. Slowly move motion control lever to desired position. TO ADJUST GAUGE WHEELS Gauge wheels are properlyadjusted when they are slightly offthe ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions, NOTE: Adjust gauge wheels with tractor on a flat level surface. 1. Adjust mower to desired cutting height (See "TO ADJUST MOWER CUTTING HEIGHT" in this section of manual). 2. With mower in desired heightofcut position, gauge wheels should be assembled so they are slightly off the ground. Install gauge wheel in appropriate hole.Tighten securely. 3. Repeat for all, installing gauge wheel in same adjustment hole. TO ADJUST MOWER CUTTING HEIGHT The position of the attachment lift lever (A) determines the cutting height. TO OPERATE MOWER Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough, rolling terrain or hills. 1. Select desired height of cut with attachment lift lever. 2. Start mower blades by engaging attachment clutch control. • Put attachment lift lever in desired cutting height slot. The cutting height range is approximately 1" to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary, depending upon soil conditions, height of grass and types of grass being mowed. The average lawn should be cut to approximately 2-!/2" during the cool season and to over 3" during hot months. For healthier and better looking lawns, mow often and after moderate growth, • For best cutting performance, grass over 6" in height should be mowed twice. Make the first cut relatively high; the second to desired height. TO STOP MOWER BLADES Disengage attachment clutch control. _IbCAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield (S) in place. 12 REVERSE OPERATION SYSTEM (ROS) Your tractor is equipped with a Reverse Operation System (ROS), Any attempt by the operatorto travel inthe reversedirection withthe attachmentclutchengaged will shut offthe engine unless ignitionkey is placed in the ROS "ON" position. ,dI_WARNING: Backing up with the attachment clutch engaged while mowing is strong[ydiscouraged. Turning the ROS"ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless absolutely necessary. USING THE REVERSE OPERATION SYSTEM Only use ifyou are certain nochildren or other bystanders will enter the mowing area. 1. Move motion control lever to neutral position. 2. With engine running, turn ignition key counterclockwise to ROS "ON" position. 3. Look down and behind before and while backing. 4. Slowly move motion control lever to reverse (R) position to start movement. 5. When useofthe ROSis notongerneeded, turn the ignition key clockwise to engine "ON" position. ROS "ON" Position IMPORTANT; The motion control leverdoes not return to neutral position whenthe clutch/ brake pedal is depressed. • To restart movement, slow!y release parking brake and clutch/brake pedal. • Sfowly move motion control lever to slowest setting. • Make all turns slowly. TO TRANSPORT When pushing or towing your tractor, Ensure to disengage transmission by placing freewheel control in freewheeling position. Freewheel control is located at the rear drawbar of tractor. 1. Raise attachment lift lever to its highest position. 2. Pullfreewheel control out andinto the slot and release so it is held inthe disengaged position. • Do not push or tow tractor at more than two (2) MPH. • To re-engage transmission, reverse above procedure. TRANSMISSION ENGAGED Engine "ON" Position (Normal Operating) TRANSMISSION DISENGAGED NOTE: To protect hood from damage when transporting yourtractor on atruck or atraiter, Ensure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.). TO OPERATE ON HILI._ d_IbWARNING: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope. Use the slope guide provided at the back of this manual. • Choose the slowest speed before starting up or down hills. , Avoid stopping or changing speed on hills. • If stopping is absolutely necessary, push clutch/brake pedalquicklyto brake position and engage parking brake. • Move motion control leverto neutral position. TOWING CARTS AND OTHER ATTACHMENTS Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your tractor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor. 13 ........ BEFORE STARTING THE ENGINE CHECK ENGINE OIL LEVEL The engine in your tractor has been shipped, from the factory, already filled with summer weight oil. 1. Check engine oil with tractor on level ground. 2. Remove oil fill cap/dipstick and wipe clean, reinsertthe dipstick and screw cap tight, waitfor a few seconds, remove and read oil level, tf necessary, add oil until "FULL' mark on dipstick is reached. Do not overfill, • For cold weather operation you should change oil for easier starting (See the oil viscosity chart inthe Maintenance section of this manual). - Tochange engine oil, see the Maintenance section in this manual. ADD GASOLINE _, Filt fuel tank to bottom offiller neck. Do not overfill. Usefresh, clean, regutarunleaded gasoline with a minimum of 87 octane, (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quantitiesthatcan be used within 30 days to ensure fuel freshness, d_t, CAUTION: Wipe off anyspilled oil or fuel. Do not store, spill or use gasoline near an open flame. IMPORTANT: When operating in temperatures below 32°F(0°C), use fresh, clean winter grade gasoline to help ensure "good cold weather starting, CAUTION: Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage thefuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine andlet it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products inthefueltank or permanent damage may occur. TO START ENGINE When starting the engine for the first time or if the engine has run out of fuel, it wilt take extra cranking time to move fuel from the tank to the engine, 1. Ensure freewheel control is in the transmission engaged position. 2. Sit on seat in operating position, depress clutch/brake pedal andset parking brake. 3. Place motion control lever in neutral position, 4. Move attachment clutch to disengaged position. 5. Move throttle control to choke position. NOTE: Before starting, read the warm and cold starting procedures below. 6. Insert key into ignition and turn key clockwise to start position and release key as soon as engine starts. Do not run starter continuously for more than fifteen seconds per minute, if the engine does not start after several attempts, move throttle control to fast position, wait a few minutes and try again. If engine still does not start, move the throttle control back to the choke position and retry. WARM WEATHER STARTING (50°F/10°C and above) 7. When engine starts, move the throttle control to the fast position. • The attachments and ground drive can now be used. If the engine does not accept the load, restart the engine and allow it to warm up for one minute using the choke as described above. COLD WEATHER STARTING (50°F/10°C and below) 7. When engine starts, leave throttle control in choke position until engine warms up and begins to run roughly. Once rough running begins, immediately move the throttle controltothe fast position. Engine warm-up may take from several seconds to several minutes (the colder the temperature, the longer the warm-up). , AUTOMATIC TRANSMISSION WARM UP Before driving the unit in cold weather, the transmission should bewarmed upas fol!ows: 1, Ensure the tractor is on level ground. 2, Place the motion control lever in neutral. Release the parking brake and let the clutch/brake slowly return to operating position. 3. AIIowone minute for transmissiontowarm up. This can be done during the engine warm up period, • The attachments can also be used during the engine warm-up period after the transmission has been warmed up. NOTE: Ifata high altitude (above 3000 feet) or in cold temperatures (below 32°F/0°C) the carburetor fuel mixture may need to be adjusted for best engine performance (see "TO ADJUST CARBURETOR" inthe Service and Adjustments section of this manual). 14 PURGE TRANSMISSION _.CAUTION: Never engage or disengage freewheel lever while the engine is running. Toensure proper operationandperformance, it is recommended that the transmission be purged before operating tractor for the first time. This procedure will remove anytrapped air inside the transmission which may have developed during shipping of your tractor. IMPORTANT: Should your transmission require removal for service or replacement, it should be purged after reinstallation before operating the tractor. t. Place tractor safely on a level surface that is clear of objects and open - with engine off and parking brake set. 2. Disengage transmission by placing freewheel control in disengaged position (See "TO TRANSPORT" in this section of manual). 3. Sitting in the tractor seat, start engine. After the engine is running, move throttle control to slow position. With motion control lever in neutral position, slowly disengage clutch/brake pedal. _IbCAUTION: At any time, during step 4, there may be movement of the drive wheels. 4. Move motion control lever to full forward position and hold for five (5) seconds. Move lever to full reverse position and hold for five (5) seconds. Repeat this procedure three (3) times. 5. Move motion control lever to neutral position. Shutoff engine and set parking brake. 6. Engage transmission by placing freewheel control in engaged position (See "TO TRANSPORT" in this section of manual). 7. Sitting in the tractor seat, start engine. After the engine is running, move throttle control to half (1/2) speed. With motion control Fever in neutral position, slowly disengage clutch!brake pedal. 8. Slowly move motion control leverforward, after the tractor moves approximately five (5) feet, slowly move motion control lever to reverse position.After the tractor moves approximately five (5) feet return the motion control lever to the neutral position.Repeat this procedure with the motion control lever three (3) times. Your transmission is now purged and now ready for normal operation. 15 MOWING TIPS - Tire chains cannot be used when the mower housing is attached to tractor. • Mower should be properly leveled for best mowing performance. See "TO LEVEL MOWER HOUSING" in the Service and Adjustments section of this manual. • The left hand side of mower shoutd be used for trimming. • Drive so that clippings are discharged onto the areathat has already been cut. Have the cut areato the right ofthe tractor. This will result in a more even distribution of clippings and more uniform cutting. • When mowing largeareas, start bytuming to the right so that clippings witldischarge away from shrubs, fences, driveways, etc. After one or two rounds, mow in the opposite direction making left hand turns until finished. ,, , • If grass is extremely tall, it should be mowed twice to reduce load and possible fire hazard from dried clippings. Make first cut relatively high; the second to the desired height. • Do not mow grass when it is wet. Wet grass will plug mower and leave undesirable clumps. Allow grass to dry before mowing. . Always operate engine at full throttle when mowing to ensure better mowing performance and proper discharge of material. Regulate ground speed by selecting a low enough speed to give the mowercuttingperformance as well as the quality of cut desired. • When operating attachments, select a ground speed thatwili suitthe terrain and give best performance of the attachment being used. BEFORE MAINTENANCE SCHEDULE Check Brake ..... Pressure Check Operator Presence A Check for L .... Fasteners C Check/Replace T Lubrication 0 Check Mower & ROS _ if V Check Tragsa_ie Check Mower Check V-Belts Check Engine ,if, Blades | IRspect N R_(:ff ..... ......... E Clean ..... _ _ ....... '..... ...... V _ If' ,ll DeveI Oil Oi =ill, i (with oil f_Iter) Engine ,, VI,_ An'ester t## # .......... I_ .......... (if equipped) _._, Fins Replace Spark ,,Replace Air Filter Paper Cartridge ReFlace Fuel '" , ,,, 'V'= Plug Filter V' Vr,;,_ V'_ Coc!!ng H if ..... Filter ' 1,11 If Screen MufflertSpark if ..... 6f Levelness Ai[,,Filter Oil .... _ Off St,Bering P|ate E_qine G C!_ae Air .... V_ I_'_ _ Cooling ,,llll II BEFORE STORAGE , p Ohan qe Engine Oit I'witheLtt ei! filter) NE Ctean E_SON " _ ,llll Cha_ee F*V_RY _0o " R clean BattenandTerminals Oebds ii EV_ERY HOURS '"' Level Clean _ HOURS if Chart Battery EVER"# _ HOURS _ V Systems _-'VERY" HOUR r_ _ ,, T EVERY 8 USE Operation ,,,,,C,heek Tire " EACH If,, " , ' "if 1_2 ....... GENERAL RECOMMENDATIONS The warranty on this tractor does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain tractor as instructed in this manual, Some adjustments will need to be made periodically to proper[y maintain your tractor. At least once a season, check to see if you should make any of the adjustments described in the Service and Adjustments section of this manual, • At least once a year you should replace the spark plug, clean or replace air filter, and check blades and belts for wear. A new spark plug and clean air filter assure proper air-fuef mixture and help your engine run better and last longer. V F BEFORE EACH USE 1. Check engine oil level. 2. Check brake operation. 3. Check tire pressure. 4. Check operator presence and ROS systems for proper operation. 5. Check for loose fasteners. LUBRICATION CHART _)Steering Pivot Bolts Zerk Wheel Bearing Zerk Zerk Front Wheel Bearing Zerk Steerin( Sector Gear Teeth _General Purpose Grease @Refer to Maintenance "ENGINE" Section IMPORTANT: Do not oil or greasethe p_vot points which have special nylon bearings, Viscous lubricants will attract dust and dirt that will shorten the life of the self-lubricating • bearings. Ifyoufeetthey must belubricated, use 0nly a dry, powdered graphite type lubricant sparingly. 16 TRACTOR Always observe safety ruleswhen performing any maintenance. BRAKE OPERATION If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced. (See "TO CHECK BRAKE" in the Service and Adjustments section of this manual). TIRES • Maintain proper air pressure in all tires (See the sides of tires for proper PSI). • Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber, . Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage, NOTE: To seal tire punctures and prevent .........flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer, Tire sealant also prevents tire dry rot and corrosion. OPERATOR PRESENCE SYSTEM AND REVERSE OPERATION SYSTEM (ROS) Ensure operator presence and reverse operation systems are working properly. If your tractor does not function as described, repair the problem immediately, • The engine should not start unless the brake pedal is fully depressed, and the attachment clutch control is in the disengaged position, CHECK OPERATOR PRESENCE SYSTEM • When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine. • When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut offthe engine. • The attachmentclutch should neveroperate unless the operator is in the seat. CHECK REVERSE OPERATION (ROS) SYSTEM • Whenthe engine is running withthe ignition switch in the engine "ON" position and the attachment clutch engaged, any attempt by the operator to drive in reverse should shut off the engine. • Whenthe engine is running withthe ignition switch in the ROS "ON" position and the attachment clutch engaged, any attempt by the operator to drive in reverse should NOT shut off the engine. BLADE CARE Forbest results mower bladesmustbesharp, Replace worn, bent or damaged blades. ACAUTION: Use onlya replacement bfade approved bythemanufacturer ofyourtractor, Using a blade not approved by the manufacturer of your tractor is hazardous, could damage yourtractorand void yourwarranty, BLADE REMOVAL 1. Raise mowerto highestposition to allow access to blades. NOTE: Protect your hands with gloves and/ or wrap blade with heavy cloth, 2. Remove blade bolt by turning counterclockwise, 3. Install new blade with stamped "GRASS SIDE" facing the ground. IMPORTANT: To ensure proper assembly, center hole in blade must align with star on mandrel assembly, 4. Install and tighten blade bolt securely (45-55 Ft. Lbs. torque/62-75 Nm). IMPORTANT: Special blade bolt is heat treated, Center Hole- _'Blade Bolt (Special) ROS "ON" Position Engine "ON" Position (Normal Operating) 17 ........ BATTERY Your tractor has a battery charging system which is sufficient for normal use. However, periodic charging of the battery with an automotive charger will extend its life. * Keep battery and terminals clean. , Keep battery bolts tight. - Keep small vent holes open. • Recharge at 6-10 amperes for 1 hour. NOTE: The original equipment battery on your tractor is maintenance free, Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary. TO CLEAN BATTERY AND TERMINALS Corrosion and dirt on the battery and terminals can cause the battery to "leak" power. I. Disconnect BLACK battery cable first then RED battery cable and remove battery from tractor. 2. Rinsethe batterywith plainwateranddry. 3, Clean terminals and battery cable ends with wire brush until bright. 4. Coat terminals with grease or petreleum jelly. 5, Reinstall battery (See "REPLACING BATTERY" in the SERVICE AND ADJUSTMENTS section of this manual). V-BELTS CheckV-belts for deterioration andwear after 100 hours of operation and replace if necessary. The belts are not adjustable, Replace belts if they begin to slip from wear, TRANSAXLE COOLING Thetransmissionfan and cooling fins should be kept clean to ensure proper cooling. Do not attempt to clean fan or transmission while engine is running or while the transmission is hot. To prevent possible damage to seals, do not use high pressure water or steam to clean transaxle. • Inspect cooling fan to Ensure fan blades are intact and clean, • Inspect cootingfins for dirt, grass clippings and other materials. Toprevent damage to seals, do not use compressed air or high pressure sprayer to clean cooling fins. TRANSAXLE PUMP FLUID The transax[e was sealed at the factory and fluid maintenance is not required for the life of the transaxie. Should the transaxte ever leak or require servicing, contact your nearest Sears or other qualified service center. ENGINE LUBRICATION Only use high quality detergent oil ratedwith API service classification SG-SL. Selectthe oil's SAE viscosity grade according to your expected operating temperature. NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting incold weather, they will result in increased oil consumption when used above 32°F/0°C. Check your engine oil level more frequentlyto avoid possible engine damage from running low on oil. Change the oil after every 50 hours of operation or at least once a year if the tractor is not used for 50 hours in one year. Check the crankcase oil level before starting the engine and after each eight (8) hours of operation. Tighten oi! fill cap/dipstick securely each time you Check the oil level. TO CHANGE ENGINE OIL Determine temperature range expected before oil change. All oil must meet API service classification SG-SL • Be sure tractor is on level surface. • Oil will drain more freely when warm. • Catch oil in a suitable container. 1, Remove oil fill cap/dipstick, Be careful not to allow dirt to enter the engine when changing oil. 2. Sfide oil drain extension from the docking position on the engine blower housing and extend outward from engine. Docking osition Oil Drain 3, To open, twist cap counter-clockwise 4. After oil is drained completely, replace cap and twist clockwise until it stops. 5. Re-attach oil drain extension to engine blower housing. 18 6. Refill engine withoilthrough oilfilldipstick tube. Pour slowly. Do not overfill. Forapproximate capacity see "PRODUCT SPECIFICATIONS" section of this manual. 7. Use gauge on oil fill cap/dipstick for checking level. For accurate reading, tighten dipstick cap securely onto the tube before removing dipstick. Keep oil at "FULl" line on dipstick. Tighten cap onto the tube securely when finished. ENGINE OIL FILTER Replace the engine oil filter every season or every other oil change if the tractor is used more than 100 hours in one year. AIR FILTER Your engine will not run properly using a dirty air filter. Service paper cartridge every 100 hours of operation or every season, whichever occurs first. Service air cleaner more often under dusty conditions. 1. Remove cover. 2. Carefully remove air filter cartridge and pre-cleaner from base. 3. Clean base carefully to prevent debris from falling into carburetor. Knobs Cartridge ENGINE COOLING SYSTEM Debris may clog the engine's air cooling system. Remove blower housing and clean area shown to prevent overheating and engine damage. Air Screer_ andOieandebris°ut chaff o IN-LINE FUEL FILTER The fuel filter should be replaced once each season. If fuel filter becomes clogged, obstructing fuel flowto carburetor, replacement is required. 1. With engine cool, remove filter and plug fuel line sections. 2. Place new fuel filter in position infuel line with arrow pointing towards carburetor. 3. Be sure there are no fuel line leaks and clamps are properly positioned. 4. Immediatelywipeup anyspilled gasoline. Clamp Fuel Fil_ NOTE: If very dirty or damaged, replace cartridge. 4. Place new pre-cleaner and cartridge firmly in base. 5. Replace cover. IMPORTANT: Petroleum solvents, such as kerosene, are not to be used to clean the cartridge. They may cause deterioration of the cartridge. Do not oil cartridge. Do not use pressurized air to clean cartridge. MUFFLER inspect and replace corroded muffler and spark arrester (if equipped) as it could create a fire hazard and/or damage. SPARK PLUG(S) Replacespark plug(s) atthe beginning ofeach mowing season or after every 100 hours of operation, whicheveroccursfirst. Spark plug typeand gapsetting areshown in"PRODUCT SPECIFICATIONS" section of this manual. CLEAN AIR SCREEN Air screen must be kept free of dirt and chaff to prevent engine damage from overheating. Clean with a wire brush or compressed air to remove dirt and stubborn dried gum fibers. 19 CLEANING • Clean engine, battery, seat, finish, etc, of all foreign matter. • Clean debris from steering plate. Debris can restrict clutch/brake pedal shaft movement, causing belt slip and loss of drive. ,_ CAUTION: Avoid all pinch points and movable parts Clutch/brake pedal Steering ,. Steering System, Dash, Fender and Mower l_ot Shown • CAUTION: A Pinch _ Points Keep finished surfaces and wheels free of atl gasoline, oil, etc. Protect painted surfaces with automotive type wax. We do not recommend using a garden hose or pressure washer to clean your tractor unless the engine and transmission are covered to keep water out. Water in engine or transmission will shorten the useful life of your tractor. Use compressed air or a leaf blower to remove grass, leaves and trash from tractor and mower. DECK WASHOUT PORT IMPORTANT: Tug hose ensuring connection is secure. 5. Turn the water on. 6. While sitting in the operator's position on the tractor, re-start the engine and place the throttle lever in the Fast ",_" position. IMPORTANT: Recheck the area making certain the area is clear, 7. Move the tractor's attachment clutch control tO the "ENGAGED" position. Remain in the operator's position with the cutting deck engaged until the deck is cleaned. 8. Move the tractor's attachment clutch control to the "DISENGAGED" position. Turn the ignition key to the STOP position to turn the tractor's engine off. Turn the water off. 9. Pull back the lock collar of the nozzle adapter to disconnect the adapter from the nozzle washout port. 10. Move the tractor to a dry area, preferably a concrete or paved area. Place the attachment ciutch control in the "ENGAGED" position to remove excess water and to help dry before putting the tractor away. Your tractor's deck is equipped with a washout port on its surface as part of its _&WARNING: A brokenor missingwashout deck wash system. It should be utilized af- fittingcould exposeyou or othersto thrown ter each use. objectsfrom contactwith the blade, 1, Drive the tractor to a level, clear spot • Replacebrokenor missing washoutfitting immediately,priorto usingmoweragain. on your lawn, near enough to a water • Plug any holes in mower with bolts and spigot for your garden hose to reach, Iocknuts. IMPORTANT: Make certain the tractor's discharge chute is directed AWAY from your house, garage, parked cars, etc. Remove bagger chute or mulch cover if attached. 2. Make sure the attachment clutch control is in the "DISENGAGED" position, set the parking brake, and stop the engine, 3. Thread the nozzle adapter (packaged with your tractor's Operator's Manual) onto the end of your garden hose. 4. Pull back the lock collar of the nozzle adapter and push the adapter onto the deck washout port at the left end of the mower deck. Release the lock collar to lock the adapter on the nozzle. 2O WARNING: TOAVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE ORADJUSTMENTS: 1. 2. 3. 4. 5. 6. Depress clutch/brake pedal fully and set parking brake. Place motion control lever in neutral position, Place attachment clutch in "DISENGAGED" position. Turn ignition key to "STOP" and remove key. Ensure the blades and all moving parts have completely stopped. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug, TO REMOVE MOWER 1. Place attachment clutch in "DISENGAGED" position. 2. Lower attachment lift lever to its lowest position, 3. Roll belt off engine pulley (M) and belt keepers (G). 4, Remove retainer spring (K), slide collar (L) off and push housing guide (P) out of bracket, 5. Remove clutch cable spring (Q) from idler arm (R). 6, Disconnect front link (E) from mower remove retainer spring and washer, 7. Go to either side of mower and disconnect mower suspension arm (A) from chassis pin (B) and rear lift link (C) from rear mower bracket (D) - remove retainer springs and washers. CAUTION: After rear lift linksare disconnected, the attachment liftleverwill be spring loaded, Have a tight grip on Ift lever when changing pos!ti0n of the lever, i 8. Slide mower out from under right side of tractor. IMPORTANT: If an attachment other than the mower is to be mounted on the tractor, remove the front link (E) and rear lift links (C) from tractor and hook the clutch spring (Q) into the cable guide on front edge of lower dash. TO INSTALL MOWER Ensuretractor is on level surface and engage parking brake. 1. Lower attachment lift lever to its lowest position. CAUTION: Lift lever is spring loaded. Have a tight grip on lift lever, lower it slowly and engage in lowest position. NOTE: Ensure mower sidesuspension arms (A) are pointing forward before sliding mower undertractor, 2. Slide mower under tractor until it is centered under tractor. iii:(_ ....i i:i i_/: 21 3. 4. ATTACH MOWER SIDE SUSPENSION ARMS (A) TO CHASSIS - Position hole in arm over pin (B) on outside of tractor chassis and secure with retainer spring. Repeat on opposite side of tractor. 7, Insert end of link (E) into hole in front mower bracket (H) and secure with washer and retainer spring (J), 8. 5. A-I-FACH REAR LIFT LINKS (C) - Lift rear corner of mower and position slot in link assembly over pin (D) on rear mower bracket and secure with washer and retainer spring, 6, ATTACH FRONT LINK (E) - Work from left side of tractor, Insert rod end of link assembly through front hole in tractor front suspension bracket (F). Hook end of clutch cable spring (Q) into hole in idler arm (R). 9. Push clutch cable housing guide (P) into bracket, slide collar (L) onto guide and secure with retainer spring (K). 10. Install belt onto engine pulley (M) and belt keepers (G). IMPORTANT: Check beltfor proper in all mower pulley grooves, _1.Raise attachment lift lever to position. 12, If necessary, adjust gauge wheels operating mower as shown in the tion section of this manual. 22 routing highest before Opera- TO LEVEL MOWER Make sure tires are properly inflatedto the PSI shown ontires, lftires are over or under inflated, it may affect the appearance ofyour lawn and lead you to think the mower is not adjusted properly. VISUAL SIDE-TO-SIDE ADJUSTMENT 1. With all tires properly inflated and ifyour lawn appears unevenly cut, determine which side of mower is cutting lower. 2. With a3/4" oradjustablewrench, turn lift link adjustment nut (A) to the left to lower LH side of mower, or, to the right to raise LH side of mower. NOTE: Each full turn of adjustment nut will change mower height about 3/16". Turn nut dghl to =raise mower FRONT-TO-BACK ADJUSTMENT IMPORTANT: to-side. To obtainthe best cutting results, the mower blades should be adjustedso the front tip is 1/8" to 1/2" lower than the rear tip when the _bower is in its highest position. CAUTION; Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth. • Raise mower to highest position. • Position any blade so the tip is pointing straight forward. Measure distance (B) to the ground at front and rear tip of the blade. • Iffronttip of blade is not 1/8" to 1/2" lower than the rear tip,_go to the front of tractor. • With an 11/16 or adjustable wrench, loosen jam nut A several turns to clear adjustment nut B. • With a 3/4" or adjustable wrench, turn front link adjustment nut (B) clockwise (tighten) to raise the front of mower, or, counterclockwise (loosen) to lower the front mower. Turn nut left to lower mower 3. Test your adjustment by mowing some uncut grass and visually checking the appearance. Readjust, if necessary, until you are satisfied with the results. PRECISION SIDE-TO-SIDE ADJUSTMENT i. With alltires properly inflated,parktractor on level ground or driveway. _0LCAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth. 2. Raise mower to its highest position. 3. At both sides of mower, position blade at side and measure the distance (A) from bottom edge of blade to the ground. The distance should be the same on both sides. 4. if adjustment is necessary, see step 2 in Visual Adjustment instructions above. 5. Recheck measurements, adjust if necessary until both sides are equal. A] T-q] Deck must be level side- Tighten adjust nut B to raise mower Loosen adjust nut B to lower mower Loosen jam nut A first NOTE: Each full turn of the adjustment nut will change mower height about 1/8". • Recheck measurements, adjust if necessary until front tip of blade is 1/8" to 1/2" lower than the rear tip. o Hold adjustment nut inposition withwrench and tighten jam nut securely against adjustment nut. $A 23 TO REPLACE MOWER BLADE DRIVE BELT The mower blade drive belt may be replaced without tools. Park the tractor on level sur- face. Engage parking brake. BELT REMOVAL1. Remove mowerfromtractor (See"TO REMOVE MOWER"inthissectionofmanual), 2. Work belt off both mandrel pulleys and idler pulleys. 3, Pull belt away from mower. BELT INSTALLATION 1. Work belt around both mandrel pulleys and idler pulleys 2. Ensure belt is in all pulley grooves and inside all belt guides, 3. Install mower (See "To Install Mower" in this section of this manual). ............. Mandrel Idler BELT INSTALLATION 1. Install new belt from tractor rear to front, over the steering plate (F) and above clutch brake pedal shaft (G). 2. Pull belt toward front of tractor and roll belt onto engine pulley (E), 3. Pull belt toward rear of tractor. Carefully work belt down around transmission cooling fan and onto the input pulley (D). Ensure belt is inside the belt keeper. 4. Install belt on centerspan idler (C). 5. Install belt through stationary idler (A) and clutching idler (B). 6. Ensure belt is in all pulley grooves and inside all belt guides and keepers. 7. Install mower (See "TO INSTALL MOWER" in this section of manual). Mandrel TO REPLACE MOTION DRIVE BELT Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of teft footrest, BELT REMOVAL I. Remove mower (See "TO REMOVE MOWER" in this section of manual). NOTE: Observe entire motion drive belt and position of all belt guides and keepers. 2. Remove beltfrom stationaryid_er (A) and clutching idler (B). 3. Remove belt from centerspan idler (C). 6. Pull belt slack toward rear of tractor. Carefully remove belt upwards from transmission input pulley and over cooling fan blades (D). 4. Remove belt downward from engine pulley (E). 5. Slide belt toward rear of tractor, off the steering plate (F)and remove from tractor. 24 TO CHECK BRAKE If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced, You may also check brake by: 1. Park tractor on a level, dry concrete or paved surface, depress brake pedal alt the way down and engage parking brake. 2. Disengage transmission by placing freewheel control in "transmission disengaged" position. Pull freewheel control out and into the slot and release so it is held in the disengaged position. The rear wheels must lock and skid when you tryto manually push the tractor forward. if the rear wheels rotate, then the brake needs to be serviced. Contact a Sears or other qualified service center. TO REMOVE WHEEL FOR REPAIRS 1. Block up axle securely. 2. Remove axle cover, retaining ring and washers to aliow wheel removal (rear wheels havea squarekey- Do not lose). 3. Repair tire and reassemble. NOTE: On rearwheelsonly: aligngroovesin rear wheel hub and axle. Insert square key. 4. Replace washers and snap retaining ring securely in axle groove. 5. Replace axle cover, NOTE: To seal tire punctures and prevent flat tires due to stow leaks, purchase and usetire sealantfrom Sears. Tire sealant also prevents tire dry rot and corrosion. Washers Retaining Axle (RearWheelOnly) FRONT WHEEL TOE-IN/CAMBER Your new tractor front wheel toe-in and camber is set at the factory and is normal. The front wheel toe-in and camber are not adjustable, if damage has occurred to affect the factory set front wheel toe-in or camber, contact a Sears or other qualified service center. TRANSAXLE MOTION CONTROL LEVER NEUTRAL ADJUSTMENT The motion control leverhas been presetatthe factory; adjustment should not be necessary. 1. Loosen adjustment bolt in front of the right rear wheel, and lightly tighten. 2. Start engine and move motion control lever until tractor does not move forward or backward. 3. Hold motion control lever in that position and turn engine off. 4. While holding motion control lever in place, loosen the adjustment bolt. 5. Move motion control lever to the neutral (lock gate) position. 6. Tighten adjustment bolt securely. Motion Control---Neutral Lever _ _ /_., / Lock __\1 NOTE: If additionalclearance is needed to get to adjustment bolt, move mower deck height to the lowest position. After above adjustment is made, if the tractor still creeps forward or backward while motion control lever is in neutral position, follow these steps: 1. Loosen the adjustment bolt. 2. Move the motion control lever 1/4 to 1/2 inch in the direction it is trying to creep. 3, Tighten adjustment bolt securely. 4. Start engine and test. 5. If tractor still creeps, repeat above steps until satisfied. TO START ENGINEWrrH WEAK BATTERY _qlLWARNING: Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries, Ifyourbatteryistooweakto starttheengine, it should berecharged.(See"BATTERY" inthe MAINTENANCE sectionof this manual). If "jumper cables" are used for emergency starting, follow this procedure: IMPORTANT: Yourtractoris equipped with a 12voltsystem. The othervehicle mustalso be a t2 voltsystem. Do notuse your tractor battery to start other vehicles. TO ATTACH JUMPER CABLES 1, Connect oneend ofthe RED cableto the POSITIVE (+) terminal ofeach battery(AB),taking care notto shortagainsttractor chassis. 2. Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery. 3. Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery. TO REMOVE CABLES, REVERSE ORDER1. BLACK cable first from chassis and then from the fully charged battery. 2. RED cable last from both batteries. Gate _'Bolt 25 Weak or Dead Battery REPLACING BATTERY _WARNING: Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc. Positive terminal must be connected first to preventsparking from accidental grounding. 1. Lift hood to raised POSition, 2. Remove terminal cover. ..... 3. Disconnect BLACK battery cable then RED battery cable and carefully remove battery from tractor. 4. Installnewbatterywith terminals insame position as old battery. 5. Reinstall terminal cover, 6. First connect RED battery cabie to positive (+) battery terminal with bolt and nut as shown. Tighten securely. /7. Connect BLACK grounding cable to negative (-) batteryterminal with remaining bolt and nut. Tighten securely 8. Close hood, TO REPLACE FUSE Replace with 20 amp automotive-type plugin fuse. The fuse holder is located behind the dash. TO REMOVE HOOD & GRILLASSEMBLY 1, Raise hood. 2. Unsnap headlight wire connector. 3. Stand in front of tractor. Grasp hood at sides, tilt toward engine and lift off of tractor, 4. When replacing hood, Ensure to reconnect the headlight wire connector. Headlight Wire Connector TRANSMISSION REMOVAL/REPLACEMENT Should your transmission require removalfor service or replacement, it should be purged after reinstallation and before operating the tractor. See "PURGE TRANSMISSION" in the Operation section of this manual. ENGINE TO ADJUST THROTTLE CONTROL The throttle control has been preset at the factory and adjustment should not be necessary Check adjustment as described below before loosening cable. If adjustment is necessary, see engine manual. TO ADJUST CHOKE CONTROL The choke control has been preset at the factory and adjustment should notbe necessary, If adjustment is necessary, see engine manual TO REPLACE HEADLIGHT BULB I. Raise hood. 2. Remove bulb holder from the hole in the backside of the grill. 3. Replace bulb in holder and install bulb holder securely back into the hole in the backside of the grill. 4. Close hood. INTERLOCKS AND RELAYS Loose or damaged wiring may cause your tractor to run poorly, stop running, or prevent it from starting. • Check wiring. TO ADJUST CARBURETOR Your carburetor has been presetatthe factory and adjustment should not be necessary. However, minor adjustment may be required to compensate for differences in fuel, temperature, altitude or load. Ifthe engine does need adjustment, see engine manual, 26 immediately prepare yourtractorfor storageENGINE attheendoftheseason orifthetractor will FUEL SYSTEM not be used for 30 days or more. _WARNING: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure. TRACTOR Remove mower from tractor for winter storage. When mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in aclean, dry area. 1. Clean entire tractor (See "CLEANING" in the Maintenance section of this manual). 2. Inspect and replace belts, if necessary (See belt replacement instructions inthe Service and Adjustments section of this manual). 3. Lubricate as shown in the Maintenance section of this manual. 4, Ensure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary. 5. Touch up all rusted or chipped paint surfaces; sand lightly before painting. BATTERY • Fully charge the battery for storage. • After a period of time in storage, battery may require recharging. • To help prevent corrosion and power leakage during long periods of storage, battery cables should be disconnected and battery cleaned thoroughly (see "TO CLEAN BATTERY AND TERMINALS" in the Maintenance section of this manual), • After cleaning, leave cables disconnected and place cables where they cannot come in contact with battery terminals. • If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces. IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel hose, or tank during storage. Also, alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. ° Emptythefueltank by starting the engine and letting it run until the fuel lines and carburetor are empty. • Never use engine or carburetor cleaner productsin the fuel tank or permanent damage may occur. • Use fresh fuel next season. NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasotine in fuel tank or storage container. Always followthe mix ratiofound on stabilizer container, Run engine at least 10 minutes after adding stabilizer to allowthestabilizer to reach the carburetor. Do not empty the gas tank and carburetor if using fuet stabilizer. ENGINE OIL Drain oil (with engine warm) and replace with clean engine oil. (See "ENGINE" in the Maintenance section of this manual). CYLINDER(S) t. Remove spark plug(s). 2. Pour one ounce of oil through spark plug hole(s) into cylinder(s). 3. Turn ignition key to "START" position for a few seconds to distribute oil. 4. Replace with new spark plug(s). OTHER • Do not store gasoline from one season to another. • Replaceyourgasoline can ifyourcan starts to rust, Rust and!or dirt in your gasoline will cause problems. • If possible, store your tractor indoors and cover it togive protection from dust and dirt. • Cover your tractor with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe which allows condensation toform and will cause your tractor to rust. IMPORTANT: Never cover tractor while engine and exhaust areas are still warm. 27 TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center JL PROBLEM Wi|l not start Hard to start CAUSE CORRECTION 1 Out of fuel. 2 Engine not "CHOKED" 1 Fi]l fuel tank. 2 See "TO START ENGINE" in Operation section. 3 Engine flooded. 3 Wait several minutes before attempting to start. 4 Bad spark plug. 4 Replace spark plug. 5 Dirty air filter. 5 Clean/replace 6 Dirty fuel filter. 6 Replace fuel filter. 7 Water in fuel. 7 Empty fue_ tank and carburetor. refill tank with fresh gasoline and replace fuel filter, 8 Loose or damaged wiring. 8 Check all wiring. 9 Carburetor 9 See "To Adjust Carburetor" in Service and Adjustments section. IO Engine valves out of adjustment. 10 Contact a Sears or other qualified service center. properly. out of adjustment. filter, t Dim/air t Clean/replace 2 Bad spark plug. 2 Replace spark p]ug. 3 Weak or dead battery. 3 Recharge 4 Ditty fuel filter. 4 Replace fuel filter. 5 Stale or dirty fuel 5 Empty fuel tank and refill tank with fresh, clean gasoline. 6 Loose or damaged wiring. 6 Check all widng. 7 Carburetor 7 See "To Adjust Carburetor" in Service and Adjustments section. 8 Engine valves out of adjustment. 8 Contact a Sears or other qualified service center. 1 Depress clutch/brake pedal. out of adjustment. ,,,,,,,,,, Engine will not turn over air filter. air filter. or replace battery. , ....... 1 Clutch/brake pedal not depressed. 2 Attachment 2 Disengage 3 Weak or dead battery. I3 Recharge 4 Blown fuse. I4 Replace fuse. 5 Corroded battery terminals. !5 Clean battery terminals. 6 Loose or damaged wiring. 7 Faulty ignition switch. 8 Faulty solenoid or starter. 9 Faulty operator presence switch(es), clutch is engaged. 28 attachment clutch. or replace battery. 6 Check all wiring. 7 Check/replace ignition switch. ' 8 Check/replace solenoid or starter. 9 Contact a Sears or other qualified service center. TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center CORRECTIO' CAUSE PROBLEM I Weak or dead battePj. 1 2 Corroded battery terminals. 2 Clean battery terminals, 3 Loose or damaged wiring. 3 Check a|i wiring. 4 Faulty solenoid or starter. 4 Check/replace will not start .................. ,, J Loss of power Excessive vibration solenoid or starter. ,................... ,,, 1 Cutting too much grass/too fast. 1 Raise cutting height/reduce 2 Throttle in "CHOKE" position. 2 Adjust throttIe control 3 Build-up of grass, leaves and trash under mower, 3 Clean underside of mower housing, 4 Di_y air fil_er. 4 ! C_ean/repIace 5 Low oil level/dirty 5 Check oil level/change 6 Faulty spark plug, 6 Clean & regapor Change sparkp|ug 7 Dirty fuel filter. 7 Replace fuel filter. 8 Stale or dirty fuel. 8 Empty fuel tank and refill tank wittfresh, clean gasoline. 9 Water in fuel. 9 Empty fuel tank and carburetor, refill tank with fresh gasoline and replace fuel filter. 10 Spark plug wire loose. 10 Connect 11 Dirly engine air screen/fins. 11 Clean engine air screen/fins. 12 Dirty/clogged 12 Clean/replace 13 Loose or damaged 13 Check all wiring, 14 See "To Adjust Carburetor' ' in Service and Adjustments section. 15 Contact a Sears or other qualified serrate center. 1 ' Worn, bent Or loose blade. 1 Replace blade. Tighten blade bolt 2 Bent blade mandrel. 2 Contact a Sears or other qualified service center, 3 Loose/damaged 3 Tighten loose part(s), Replace damaged parts. 1 Check wiring, switches and connections, If not corrected, contact a Sears or other oil. muffler. widng. 14 Carburetor out of adjustment. 15 Engine valves out of adjustment. part(s). speed air filter. oil. & tighten spark plug wire muffler, i,,,,,,, i Engine continues to run when operator leaves seat with attachment clutch engaged 11 Faulty operator-safety presence control system, 29 TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center CAUSE PROBLEM Poor cut - uneven cuffing Mower blades not rotate will Poor grass discharge Headlight(s) not working (if so equipped) CORRECTION 1 Worn, bent or loose blade. 1 Replace blade. Tighten blade bok 2 Mower deck not level. 2 Level mower deck. 3 Buildup of grass, leaves, and trash under mower. 3 Clean underside housing. 4 Bent b_ade mandrel 4. Contact a Sears o5 other qualified service center. 5 Clogged mower deck vent from build-up of grass, leaves, and trash around mandrels. 5 Clean around mandrels to open vent holes. 1 Obstruction 1 Remove obstruction. 2 Worn/damaged 3 Frozen idler pulley. 3 Replace idler pulley. 4 Frozen blade mandre!. 4 Contact a Sears or other qualified service center. 1 Engine speed too slow. 1 Place throttle control in "FAST" position, 2 Travel speed too fast. 2 Shift to slower speed. 3 Wet grass. 4 Mower deck not level. in clutch mechanism. mower drive belt, ! 2 L3 5 Low/uneven 6 Worn, bent or loose blade. tire air pressure. 7 of mower Replace mower drive belt, Allow grass to dry before mowing 4 Level mower deck. 5 Checktires for proper PSI. I6 Replace/sharpen blade bolt. Buildup of grass, leaves and trash under mower. 7 Clean underside housing, 8 Mower drive belt worn. 8 Replace mower drive belt. 9 Blades impropedy 9 Reinstall blades sharp edge down installed. blade. Tighten of mower 110 Replace with blades listed in this manual 10 Improper blades used. 11 11 Clogged mower deckvent holes from buildup of grass, leaves, and trash around mandrels. Clean around mandrels to open vent holes. Light switch is "OFF". 1 Turn light switch "ON". 2 Bulb(s) or lamp(s) 2 Replace bulb(s) or lamp(s). 3 Faulty light switch. 3 Check/replace 4 Loose or damaged wiring. 4 Check wiring and connections, 5 Blown fuse, 5 Replace fuse. burned out, 3O light switch. TROUBLESHOOTING CHART; See appropriate section in manual unless directed to Sears service center PROBLEM CAUSE Battery will not charge !1 i Replace battery, 2 Poor cable connections. 2 Check/clean all connections. 3 Faultyregulator 3 Rep|ace reguiater. 4 Loss of drive (if so equipped), 4 Replace alternator. 1 Freewheel control in "DISENGAGED" position, Faulty alternator. 1 Place freewheel control in "ENGAGED" position. i2 i Debris on steering plate (ff equipped), 2 See "CLEANING" in the maintenance section. Motion drive belt worn, damaged, or broken, 3 Replace motion drive belt, Air trapped in transmission shipment er servicing, 4 Purge transmission. 5 Install axle key at rear wheel, See "TO REMOVE WHEEL!' in the Service and Adjustments section, 3 _4 5 during Axle key missing. 11 Engine "backfires" when turning engine "OFF" CORRECTION Badbattery cell(s). Engine throttle control not set 1 between half and fulI speed (fast) position before stopping engine. Move throttle control between half and full speed (,fast) position before stopping engine. Reverse operation system (ROS) is not "ON" while mower or ether attachment is engaged. Turn ignition key to ROS "ON" position. See Operation section, , Engine dies when tractor is snl_tea into reverse 1 ,,,, ,, NEED MORE HELP? You'll find the answer and more on managemyhome.com • Find this and a[[ your - Get answers other from our team product • Get a personatized maintenance • Find infm'matlon manage and tools manuals online. of home experts. ptan for your home, to hetp with home projects. home bmught to you by Sears 31 - for free! ,, SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL ro 15 DEGREES MAX. 1 _ down the face slopes, never across the face. not mow ARNING: To of avoid serious injury, operate yourDo tractor up and slopes greater than 15 degrees. Make turns gradually to prevent tipping or loss of control. Exercise extreme caution when changing direction on slopes. 1. Fold this page along dotted line indicated above_ 2. Hold page before you so that its left edge is vertically parallel to a tree trunk or other upright structure. 3. Sight across the fold in the direction of hill slope you want to measure. 4. Compare the angle of the fold with the slope of the hill. Garant[a.......................................................... 33 Programa de Mantenimiento .......................... 47 Servicio y Ajustes ........................................... 52 Reglas de Seguridad ...................................... 34 Almacenamiento ............................................. 58 Especificacionesdel Producto ........................ 37 Identificaci6n de Problemas ........................... 59 MontajeiPre Operaci6n ................................... 38 Operaci6n ....................................................... 40 Servioio Sears ............................. Contraportada Mantenimiento ................................................ 47 Garantla para equipos tractores Craftsman GARANTiA COMPLETA DE CRAFTSMAN PaR DOS AI;JOS desde Ia fecha de compra, todas las partes no sustituiblee de este equipo tractor estdn garantizadas contra cualquier defecto de matedal o mane de obra. Una parte no sustituib[e defectuosa recibird repsraci6n o reemplazo gratuito en casa si la reparaci6n es imposibfe. PaR CINCO ANOS desde la fecha de compra, el bas6dor y el eje delantsro de este equipo tractor estdn garanfizados contra cualquier defecto de material o mane de obra. Un bastider o eje deJantero defectuoso ....recibir& reparaci6n o reemplazo gratuito en casa si la reparaci6n es imposible. DURANTE 90 DJAS desde la fecha de compra0 la bateda (una parts sustituible) de este equipo tractor esl_ garantizada contra ¢ualquier defecto de material o mane de obra (nuestra prueba comprueba que no contendr& carga). Una bateria defectuosa recibir_ un reempJazo gratuito en casa. GARANTJA L|MITADA DE PaR VIDA ADIC|ONAL an el EJE DELANTERO DE HIERRO COLADO (el est', provisto) DURANTE EL TIEMPO EN QUE SE USE par el propietario original despu_s de] quints ass a partir de ta fecha de compra, el eje delantero de hierro colado (si est_ provisto) de este equips tractos est& garantizado contra cualquier defects de material o mane de obra. Con el comprobante de compra, un eje delantero de hierro colado recibir& un reemplazo gratuito en casa. SERVICIO DE GARANTIA Para conocer los detalles de la cobertura de garantia para obtener una reparaci6n o reemplazo gratuito, Ilame al 1-800-659-5917 6 visits el sitio web: www. craftsman.cam En redes los cases anteriores, si el reemplazo el rnismo modelo o unc equivalente. as imposible, el equipo tractor serd sustituido sin cargo con Toda la cobertura de garantia anterior serd nula sieste servicios comerciates o si se alquifa a otra persona. equipo tractor se utiiiza alguna vez para brindar Esta garantfa cubre 0NICAMENTE defectos de materialy mane de obra. La cobertura do garantia NO inctuye: - Partes sustituibies (excepto la bateria) qua se puedan desgastar par el usa normal dentro del perlodo de gamntia incluso, pere sin limitarse a, cuchilIas, bujfas, f_itros de airs, correas y filtros de aceite. • Se_vicios de mantenimiento est_.ndar, cambios de aceite o afinaciones. • Reemplazo o reparaci6n de neum_ticos par pinchazos causados par objetos externos coma clavos, espinas, tocones o vidrios. • Reemplazo o reparaci6n de neum=Sticos o ruedas per desgaste normal, accidentes o par operaci6n o mantenimiento incerrectos. • Reparaciones necesadas par abuse deI operador incluso, pete sin limitarse a, daSos causados par remolcar objetos que superen la capacidad del equipe tractor, chocar contra objetos que doblen el bastidor, el ensamble del eie o el cJgOet_al o sobrepasar la velocidad del motor. • Reparaciones necesarias par negligencia del operador, incluso (pero sin Iimitarse a ello) daSos el6ctricos y mec_nicas causades par el almacenamiento incorrecto, par no usar el grade y Ia cantJdad correctos de aceite de motor, par no mantener del muelle tibre de residues inflamables o par no mantener el equips tractor de acuerdo con las instrucciones que contiene el manual del operador. • Limpieza o reparaciones del motor (sistema de combustible) cuando se determina que se us6 combustible contaminado y exidado (sarro). En general, el combustible debe usarse dentro de los 30 dias posteriores a su cempra. • Deterioro y desgaste normal de Ice acabades eXterieres o sustituci6n de r6tulos de preductos. Esta garantJa le otorga derechos legales especfficos, y usted tambi_n puede toner otres dereches que var_an de un estado a otro. Sears Brands Management CorPoration, Hoffman Estates, IL 60179 33 ............ _,PELtGRO: Esta Maquina cortadora es capaz de amputar las manosy los pies y de lanzar objetos, si no se observan tas instrucciones de seguridad siguientes se pueden producir lesiones graves o la muerte. • No maneje la m&quina si no tiene la trampa _DVERTENCIA: Siempre desconec_e el alampara c_sped completa, la canaieta de descarga bre de Ia bujia y p6ngalo donde no pueda entrar u otros dispositivos de seguridad en su tugar en contacto con la buiia, para evitar el arranque yen funcionamiento. per accidente, durante la preparaci6n, el trans• Ralentizar antes de girar. porte, el ajuste o cuando se hacen reparaciones. • Nunca dejar una m_.quina encendida sin vigi_ADVERTENCIA: No avarice cuesta abajo a punlancia. Apagar siempre las cuchilias, porter el to muerto ya que podda perder el control deltractor. freno de estacionamiento, parar el motor, y _.ADVERTENCIA: Remolque sotamente tos quitar Ias llaves antes de ba}ar. accesorios recomendados y conformes alas • Desenganche las hojas cuando no est6 cortancaracteristicas indicadas per el fabricante de su do cL=sped,Apague el motor y espere hasta que tractor, Tenga cuidado y prudencia al utilizar el todas Ias partes se detengan per complete antractor. Cuando se encuentre en un declive, oper tes de limpJarIa m&quina, retirar Iatrampa para utilizando exclusivamente la velocidad m&s baja. c_sped o destapar la canaleta de descarga. En case de un declive una carga excesiva po• Hacer funcionar ta m_.quina s61ocon ]a Iuzdel dda resultar peligrosa. Los neum&ticos pueden dia o luz artificial buena. perder ta tracciSn con el suelo y hacerle perder • No hacer funcJonarla m&quina estando bajo el control de su tractor. Josefectos de alcohol o droga, _d_.DVERTENOIA: El tube de escape del motor, • Porter atenciSn al tr&fico cuando se opera cerca de calles o se cruzan, a{gunos de sus constituyentes y a!gunos componentes deI veh{culo contienen o desprenden • Poner la m_xima atencibn al cargar o descarproductos quimicos conocidos en el Estado de gar la m&quina en una caravana o cami6n, California come causa de c&ncer y defectos al • Llevar siempre gafas de protecciSncuando se nac,imiento u otros daSos reproductivos. hace funcionar la m&quina. _,DVERTENCIA: Los bornes, terminales y ac. Los dates lndican que los operadores a partir de los 60 aSos est_.n afectados per un gran cesorios relatives de la bateria contienen plorno porcentaje de heridas relativas a la conducciSn o compuestos de plomo, productos qufmicos conocidos en et Estado de California come causa deI cortac_sped. Estos operadores tenddan que evatuar su habitidad de hacer funcionar de c&ncer y defectos at nacimiento u otrosdaSos el cortac_sped de mode Io bastante seguro reproduotivos. Lavar las manes despu_s de para proteger a si misrnos y a otras personas manipularlos. de heridas graves. i. FUNCIONAMIENTO GENERAL • Seguir Ias recomendaciones del fabrJcante • Leer,entender y seguir todas las instrucciones para los pesos y contrapesos de las ruedas. sobre la m_.quina yen el manual antes de • Mantener la m__quina libre de hierba, hojas u empezar. otros escombros que pueden toear el tube de • No poner las manes o los pies cerca de partes escape/partes deI motor calientes y quemarse, giratorias o debajo de ]a m_quina, mantener No permitir que et puente del cortac_sped siempre limpia la abertura de descarga. cargue hojas u otros residues que pueden • Permitir ei funcionamiento de la m_.quina sSIo causar acumulaciones. Limpiar toda salpicadura de aceite o carburante antes de hacer a adultos que tengan familiaridad con Ias instruociones, operaciones sobre la rn&quina o guardarla. Dejarla enfriar antes de guardar{a. • Limpiar el __rea de objetos come piedras, juguetes, cables, etc. que pueden ser recogiIL FUNCIONAMIENTO EN PENDIENTES dos y disparados con las cuchillas. Las pendientes son el mayor factor de accidentes • Asegurarse de que el &rea est_ libre de otras relatives a la p_rdida de control y vuelco, que personas antes de ponerla en marcha. Parar pueden causar severas heridas o muerte. EJfun]a m_.quina si alguien entra en el _rea, cionamientoen pendientes requiere una atenci6n • Nunca Jlevar pasajeros. extra, Si no es posible hacer marcha atr__sen una • No cortar marcha atr,_s al no ser absolupendiente o site sientes incomodo, no la cortes. tamente necesario. Mirar siempre abajo y • Cortar hacJa arriba y abajo de una pendiente, delante mientras se precede atr&s. no de mode horizontaI, • Nunca dirigir et matedai descargado hacia na• Porter atenciones a los hoyos, {as ra_ces, los die. Evitar descargar materiaJ contra paredes bultos, las piedras u otros objetos escondidos. u obstrucciones. El material podria rebotar Et terreno irregular puede volcar ta m&quina. hacia el operador. Parar las cuchillas cuando La hierba atta puede esconder obst&ouIos. se pasan superficies de grava. 34 . Escoger una velocidad de marcha baja de modo que no sea necesario pararse o cambiar estando en una pendiente. • No cortar la hierba moiada. I_asruedas pueden perder tracci6n. Poner siempre una marcha cuando se est,. en pendientes. No porter on punto muerto eir cuesta abajo. • Evitar arrancar, pararse o girar en una pendiente. Si las ruedas pierden tracc'_n, desconect=ar tas cuohillas y proceder despacio coesta abajo en la pendiente, • Mantener todo los rnovimientos en 1as pendientes lentos y gradual. No hater cambios repentinos de velocidad o direcci6n, ya que pueden causar el escape de Ia m&quina. -Poner la m&xima atenci6n cuando la m_.quina funciona con captadores de hierba u otros dispositivos enganchados; pueden afectar ta estabilidad de Ia m&quina. No usar en pendientes empinados. • No intentar estabilizar ta mn_;=quina poniendo el pie en el terreno. • No cortar cerca de bajadas, cunetas y orillas. Las m&quina puede votcarse improvisamente si una rueda est_ en el borde o so hunde. iii. NIITtOS _ADVERTENOIA: LOS NI_JOS PUEDEN SUFRIR DANOS CON EL U$O DE ESTE EQUIPO. La Academia Estadounidense de Pediatria (American Academy of Pediatrics) recomienda que s6Io se perrnita a nifios con una edad minima de 12 ahos manejar m_.quinas cortacL_sped manuales, y aI menos de 16 afios para manejar trac_ores cortac_sped. Si el operador no pone atenci6n a la presencia de los nifios pueden ocurrir acoidentes tr&gicos. Los nifios a menudo esL&natraidos por la m&quinay las actividad de cortar. No dar pot hecho de que los nifios se queden adonde estaban la 01tima vez que los vistes. • Mantener los nifios fuera del &rea de corte y vigilados per un adulto responsable que no sea el operador. • F_staralerta y apagar la m&quina si un nifios entra en el &rea. • Tenet el m_Jmo cuidado cuando se acerca a cantos ciegos, arbustos, &rboles u otros objetos que pueden impedir la vista de nifios. IV. REMOLQUE • Remolcar s61ocon una m_quina que tenga un gancho disefiado para remolcar. Enganchar el equipo o remolcar s61o en el punto dispuesto ai efecto. • Seguir las recomendaciones del produCtor con respecto a los llmitas del equipo por remolcar y el remolque en pendientes, • Nunca permitir que nifios u otras personas est_n dentro del equipo pot remolcar. • En pendientes, el peso del equipo rernolcado puede causar la p_rdida de _'acci6n y la p_rdida de control. • Viajar despacio y dejar m&s distancia para frenar. V. SERVlClO MANIPULACK_N SEGURA DE LA GASOLINA Para evitar heridas personales o da_os alas cosas, poner e[ m_imo cuidado a la hora de manipular la gasolina, La gasolina, es extremamente inftamable y los vapores son explosives. • Apagar todos los cigarriUos, cigarros, pipas y otras fuentes de ignioi6n. • Usar sblo contenedores para gasolina aprobados. . • • • • • Antes y durante la marcha art&s, mirar adelante y abajo para ver si hay nifios pequefios. • Nunca Ilevar nifios, incluso si hay ]as cuchillas apagadas. Podrian caer y herirse seriamente o interferir con el funcionamiento seguro de Ia rn&qu[na, los nifios que se han Ilevado prec* edentemente pueden aparecer do prontoen el _,rea de corte por otto paseo y ser attopellados o tumbados por Ia m&quina. • Nunca dejar que los nifios manipulen la m_quina. • • • 35 Nunca quitar el tap6n de la gaso]ina o afiadir carburante con el motor on mareha, dejar enfTiar el motor antes del abastecimiento de la gasoIina. Nunca abastecer la m&quina al interior de un local. Nunca guardar la m_.quina o el contenedor de[ carburante donde haya una llama abierta, chispas o una luz piloto como un calentador de agua u otros dispositivos. Nunca Ilenar los contenedores aI interior de un vehiculo o en una caravana o cami6n recubiertos con un forro de pl_stico. Colocar siempre los contenedores en el terreno lejos del vehfculo cuando se est& tlenando. Quitar el equipo de gas det cami6n o caravana y abastecer]o en el terreno. Si no es posible, abastecer dicho equipo con uncontenedor port&til, m_.s bien que de un surtidorde gasolina, Mantener la boqui]]a a contacto del borde del depbsito de carburante o la abertura del contenedor durante toda la operaci6n de abasteeimiento. No utilizar un dispositivo con boquitla cerrada-abierta. Si se vierte carburante sobre la ropa, cambiarse ta ropa inrnediatamente. Nunca lIenar el depbsito m&s de to debido. Volver a colocar el tap6n del gas y cerrar de modo ffrme. OPERACIONES DE SERVICIO GENERALES • Nunca hacer funcionar la m&quina en un _rea cerrada. • Mantener todas las tuercas y pemos apretados para asegurarse de que trabaja en condiciones seguras. • Nunca modificar los dispositivos de seguridad. Controlar su correcto funcionamiento regularmente. • Mantener la m&quina libre de hierba, hojas u otros residues acumulados. Limpiar las salpicaduras de aceite o carburante y quitar cualquier cosa mojada con carburante. Dejar que la m&quina se enfrie antes de guardarla. • Si se golpea unobjeto ajeno, hay que pararse e inspeccionar Ea rn&quina. Reparar, si es necesario, antes de volver a poner en marcha, • Nunca hacer ning_n ajuste o reparaci6n con el motor en funci6n, • Controlar el funcionamiento del freno frecuentemente. Ajustar y hacer ]as operaciones de mantenimiento cuando eso sea necesado, • Estar alerta y apagar ta m&quina si un nir_os entra en el &tea. • Antes y durante la marcha art&s,mirar adelante y abajo para ver si hay niSos peque_os. • Cortar hacia arriba y abajo de una pendiente (15° M,_x), no de mode horizontal. • Escoger una velocidad de marcha baja de mode que no sea necesario pararse o cambiar estando en una pendiente. • Evitar arrancar, pararse o giraren unapendiente. Si las ruedas pierden tracci6n, desconectar las cuehillas y preceder despacio cuesta abajo en la pendiente. ° Si la m&quina se para mientras va cuesta arriba, desconectar las cuchillas, poner Ia marcha atr&s y ir hacia atr&s despacio. • No girar estando en pendientes si no es necesario, y luego girar despacio y gradualmente cuesta abajo, si es posible. • AI cargar o descargarlam&quina, no sobrepase el &ngulo m&ximo recomendado de 15°. • Vedfique Eoscomponentes de Ia trampa para c_sped y la canaJetade descarga con frecuen* ciay sustituya con repuestos recomendados per el fabricante cuando sea necesario. • Las cuchiflas del cortac6sped son afiladas, Envolver Ia cuchflla, ponerse guantes y porter la m_xima atenei6n cuando se hacen operaciones en elias. • Mantener y sustituir las etiquetas de seguridad e instrucci6n, cuando sea necesario. • Asegurarse de que el &rea estL=libre de otras personas antes de poneda en rnarcha, para Ja m_,quina si alguien entra en el &tea, • Nunca Ilevar pasajeros. • No cortar marchaatr_Lsal no serabsolutamente necesario. Mirar siempre abajo y delante mientras se precede atr&s. • Nunca IJevar nir_os, incluso si hay las cuchiJlas apagadas. Podrian caer y herirse sedamente o interferir con el funcionamiento seguro de la m&quina, los nifios que se han llevado precedentemente pueden aparecer de prontoen el &rea de corte per otto paseo y ser atropellados o tumbados per la m&quina, • Mantener los nifies fuera de! &rea de corte y vigilados per un adulto responsable que no sea el operador. 36 ESPECIFICACIONES DEL PRODUCTO Capacidad y Tipo de Gasolina: $.0 Galoneslll,35 L Regular Sin Plomo Tipo de Aceite API: SG-SL): SAE 30 (eobre 32=F/0°O) 8AESW30 (deabaio32°Ft0°C) Capacidad Aceite: (;on Fittro: Sin Filtro. de Bujia En el estado de California, ]a [ey exige 1oanterior (Secei6n 4442 del "California Public Resources Code"). Otros estados pueden contar con otras leyes parecidas, l.as leyes federales se aplican en la tierras federales. Su centro de Servicio m&s cercano tiene disponibIe amortiguadores de chispas para el silenciador. (Yea la secci6n de Partes de Repuesto en el manual Ingl@sdel duello.) 56 Ozj1,65 L 48 Oz.!1,4 L ACUERDOS DE PROTECCION PARA LA REPARAC|6N Congratulaciones pot su buena compra. Su nuevo producto Craftsman® est,. disefiado y fabricado para funcionar de modo fiable pot muchos aries. Pete como todos los productos, puede necesitar a[guna reparaci6n de tanto en tanto. En este caso tener un Acuerdo de Protecci6n para Ia Reparaci6n puede hacedes ahorrar dtnero y fastidios. Compre ahora un Acuerdo de Protecci6n para Ia Reparaci6n y prot@gese de molestias y gastos inesperados. Un Acuerdo inciuye toe puntos s_guientes: • Servicio experto de nuestros 12.000 especialistas profesionales en la reparaci6n. • Servicto itimitado sin cargo alguno para las partes y la mano de obra sobre todas las reparaciones garantizadas. • Sustituci6n del producto si su producto garantizado no puede ser arreglado, . Descuento de110% sobre el precio corriente del servicio y de las partes relativasal servicio no cubiertas pot el acuerdo; tambi_n el 10% menos sobre el precio corriente de un control de mantenimiento preventivo, • Ayuda rdpida por teldfono -soporte telef6nk co por parte de un representante Sears sobm productos que requieren un arreg[o en casa, y adem_s una programaci6n sobre los arreglos m&s convenientes, Cuando se ha comprado el Aeuerdo, basra con una Uamadatelef6nica para programarel servicio, Puede IIamar cuando quiera, dia y noche o fijar en lfnea una cita para obtener el servicio, Sears tiene m&s de 12.000 especialistas profesionates en la reparaci6n, que tienen acceso amEs de 4,5 millones de partes y accesorios de calidad. Este es el tipo de profesionalidad con que puede contar pare ayudar a alargar la vida del producto que acaba de comprar, pot muchos aSos, iCompre hoy su Acuerdo de Protecci6n para la Reparaci6n] Se aplican algunas limitaciones y exclusiones, Para conocer los precios y tener m_is lnformaci6n, Ilame al 1-800-827-6655, Champion RC12YG (Aberlura: .030'=/0.76 mr;}) Velocidad de Recarr'_o (Mph/Kph): Marcha Adelante: Atr&s: 8istema Carga: 3 Amps Batteria 5 Amps !_uces de 0 - 5.2/8,4 0 - 2.9/4,7 !Bateria: Amp/Hr: Min. CCA: Modelo TamaSo: Torsi6r_ deI Pemo de ia Cuchilla: 4S-55 Ft. Lbs./62-75 28 230 U1R Nm ...... FELICITACIONES per la compra de su tractor. Ha side diseSado, plan_cadoy fabricado para darle Ia mejot contiabilidad yel mejor rendimiento posible. En el caso de que se encuentre con cuaIquier problema que no pueda solucionar f_cilmente, haga el favor de ponerse en contacto con un centTo de servicio Sears o con un OtTOcentro de servicio cualificado. Cuenta con representantes bien capacitados y competentes y con las herramientas adecuadas para darle servicio o para reparar este tractor. Haga el favor de leer y de guardar este manual. Estas instruc-ciones Ie permitir_n montar y mantener su unidad en forma adecuada. Siempre observe Ias "REGLAS DE SEGURIDAD/' RESPONSABILIDADES DEL CLIENTE • Lea y observe tas reglas de seguddad. - Siga un programa regular de mantenimiento, cuidado y uso de su tractor. • Siga las instrucoiones descritas en ]as secciones "Mantenimiento" y 'Y_imacenamiento" de este manual, • Utitice prendas de seguridad adecuadas at manejar la m&quina, incluidos (como m_nimo) calzado de segur[dad, gafas protectorasy protecci6n auditiva. No utilice pantalones cortos yio calzado abierto cuando corte la hierba. • Informe siempre a alguien de que se dispone a cortar la hierba en el exterior. _DVERTENCIA: Este tTactor viene equipado con un motor de combusti6n interna y no se debe usar sobre, o cerca, de un terreno no desarrollado cubierto de bosques, de arbustos o de c_sped, o menos que el sistema de escape del motor venga equipado con un amortiguador de chispas que cumpla con Ias leyes locates o estatales (si existen). Si se usa un amortiguadorde chispas, el operador debe mantenerlo en condiciones de trabajo eficientes. SERVICIO DE INSTALAClON SEARS Pete ta instelaci6n profesione/ Seers de aparatos de casa, puertas de garaje, calentadores de agua y otTosimportantes articulos para Ia casa, en U.S,A Ilamar a 1-800"A-MY-HOME® 37 Llaves Hoja de pendiente Llaves (2) Su tractor nuevo ha sido montado en la f&brica con Ia excepci6n de aquellas pares que no se han montado pot razones de envfo. HERRAMIENTAS NECESARIAS PARA EL MONTAJE Un juego de Ifaves de tubo facilitarA el montaje. A continuaci6n se enumeran los tamaSos de las Ilaves est&ndar. (1) Uave de 1/2" Cuchillo (2) Uaves de 7/16" Medidor de presi6n Pinzas Cuando en este manual se mencionan los t6rminos"mano derecha" o "rnano izquierda"se refierea cuando usted se encuentra en la posici6n de operaci6n (sentado/a detr_.sdeI volante de direcci6n). PARA REMOVER EL TRACTOR CAJA DE CARTON AJUSTE EL ASIENTO 1. Si@ntesesobre el asiento, DE LA 2. Levante la paianca del ajuste (A) hacia arriba y mueva e[ asiento hasta que alcance una posici6nc6modaque lepermita presionar completamentesobre el pedal del embragueifreno. 3. Desconecte ta palanca paratrabar el asiento en la posici6n. DESEMPAQUE LA CAJA DE CARTON • Remueva todas las partes sueltas que est_n accesibles, y las cajas de partes, de la caja de cart6n grande. Cortar a to largo de las lineas de puntos en todos los cuatro paneles de cart6n. Remover los panefes de cierre y aplanar los paneles Iaterales. Revise si hay partes sueltas adicionales o cart6n y remu6valas. ANTES DE REMOVER EL TRACTOR DE LA CORREDERA VERtFIQUE 1, LA BATERiA Levante deI capota a la posici6n levantada, AVISO: Siesta baterta esta utilizada despu6s del rues y aSo indicado sobre la etiqueta (la etiqueta que se encuentra entre los terminates), cargue la bateria por un minimo de una hora a 6-10 amps. (Vea "BATERiA_'en la secci@nde Mantenimento de este manual), • Para instale la bater[a, y cable de la bateria, realice el procedim_ento desorito en "REE MPLAZAR LA BATERI_' del capitulo de Servicio y Ajustes de este manual. AVISO: Ahora puede rodar o conducir su tractor fuera de la corredera. Siga las siguientes instrucciones para remover el tractor de Ia corredera. _DVERTENCIA: Antes de empezar, leer, entender y seguir todas las instrucciones presentes en Ia seccibn de Operaciones de este manual. Asegurarse que el tractor est@ en un _rea bien ventilada. Asegurarse que la zona delante del tractor est.@Iibre de otras personas y objetos. 38 PARA HACER RODAR EL TRACTOR FUERA DE LA CORREDERA (Vea ia secci6n de la operaci6n para la localidad y |a funcibn de los controles) 1. Apriete la manillade ]evantamiento del pist6n y, levante Ia palanca de levantamiento del accesorio a su posici6n mds alta. 2. Suelte el freno de estacionamiento presionando el pedal del freno. 3. Ponga el control de Ia rueda libre en la posict6n de giro libre para desenganchar la transmisi6n. (Vea "PARA TRANSPORTAR" en la secci6n de Operaci6n de este manual). (Vea "PARA TRANSPORTAR" en la secci6n de Operaci6n de este manual). 4. Haga rodar el tractor hacia delante fuera de la corredera. Gontinuar con las siguientes instrucciones. ........ LISTA DE REVISION Antes de operar yde disfrutar de su tractor nuevo, le deseamos que reciba el mejor rendimiento y la mayor satisfaccion de este products de calidad. Haga el favor de revisar la lista a continuacion: _" Se han completado todas las instrucclones de montaje. J No quedan partes sueltas en fa caja de cad6n. #f La bateria est6 preparada y cargada en forma adecuada. REVISIC)N DE LA PRESION DE LAS LLANTAS Las llantas en su unidad fueron infladas demasiado en la _brica per razones de envio, La presi6n de las Ilantas correctas es importante para obtener el meier rendimiento en el corte, • Reduzca la presi6n de los neum_.ticos a la PSI que se indica en estos. REVISION DE LA NIVELACI6N DEL CON JUNTO Para obtenerlos mejores resultadosen el corte, la caja de la _agadoratiene clue estar nivelada en la forma adecuada. Vea"PARA NIVELAR LA CAJA DE LA SEGADORi_' en la secci6n de Servicio y Ajustes de este manual. REVISI6N DE LA POSICION ADECUADA DE TODAS LAS CORREAS Vea ias flguras que aparecen para cambiar las correas de impufsi6n de ta cuchilla de ta segadora y de movimiento en la secci6n de Servicio y Ajustes de este manual. Verifique que ias correas slgan su paso correcto. ,/" Et asiento ha side ajustado en forma c6moda y apretado en forma segura. ,/' Todas las Ilantas han side infladas en forma adecuada. (Para fines de envio, las Ilantas se infiaron demasiado en ta f&brica.) JAseg0rese clue el conjunto segador est_ nivelado en forma adecuada, de lade a lade y desde adelante hacia atrds, para obtener los mejores resultados en e] corte. (I.as llantas tienen que estar infladas en forma adecuada para la nivelaciSn.) _" Revise {as correas de impulsi6n y de la segadora. Aseg_rese que recorran el paso adecuado alrededor de ]as poleas y dentro de todos los fijadores de las correas. t/" Revise el alambrado. Fijese que todas las conexiones todavia est_,n segurasy que los alambres est_n sujetos en forma adecuada. ,,/Antes de conducir el tractor, asegfirese clue el control de rueda ]ibre este en la posictbn de "transmisi6n enganchada" (Yea "PARA TRANSPORTAR" en la secc{bn de la OperaciSn de este manual). AI mismo tiempo que aprende a come usar su tractor, preste atencion extra a los puntos de importancia que se presentan a continuacion: •/' El aceite del motor 8ene que Iiegar al hive] adecuado. 1/El estanque de combu_bletiene que estar lleno con gasolina sin plomo regular, nueva y [impia. ef Familiaricese con redes los controles - su ubioaci6n y su funci6n, Op(,=relos antes de hacer arrancar el motor. Aseg_rese que el sistema de frenos est_ en una condiciSn de operaci6n segura. _" Asegurarse de que el Sistema de Preseneia dei 0perador y et Sistema de Funcionamiento AthOs (ROS) funcionan de mode adecuado (Vet las Secciones de Funcionamiento y Mantenimiento en este manual). t/" Es importante purgar ta transmisi6n antes de operar su tractor per Ia primera vez, Siga las lnstrucciones adecuadas para el empiezo y para purgar (Vea "PAPA EMPESAR EL _OTOR"y "PARA PURGAR LA TRANSMIStON" en la secci6n de la Operaci6n de este manual. REVISI(_N DEL SISTEMA DE FRENOS Una vez que usted haya aprendido a manejar su tractor, verifique que e] freno funcione correctamente. Vet "PARA VERIFICAR $1 FUNCIONA BEN EL FRENO" en el capftu]o de servicio y ajustes de este manual. 39 Estos simbolos pueden aparecer sobre su tractor o en la Iiteratura proporcionada con el producto, Aprenda y comprenda sus significados. R MARCHA N ATR h,S NEUTRO H L ALTO BAJO ESTRA_IGU- Rh.PIOO LENTO LAGION FRENODE ALTURADE LA LEVANTAMIENTO ESTAGIONAM]ENTO SEGAOORA DE LA SEGADORA ATRAS HAC)AADELANTE °RUCE"O DE EMBRAGUE ®@@@@ ACCESORIODEL EMBRAGUE ENGANCHADO ACCESOR|ODEL EMBRAGUE PEUGRO,GUARDELAS MANES Y LOS PIESLEJOS DESENGANCHADO MANTENGAEL PELtGROSDE AREA DESPEJADA PENDIENTES (Veala secc_bn d8 las regi_sdesegurLdad) PELIGROmuerte indica un peligro que, si no se evita, provoca o lesiones graves. ADVERTENC|A que,graves. si no se evita, puede provocar indica muerteunopeligm lesiones RUEDA LIBRE (So_amente pars los modelos automatico) & No seguir ias siguientes instrucciones puede provocar heridas o muerte. Los simbo3os de arise de seguridadse utilizan pars identificar informaciones de seguffdad relativas a peligros que puedenprovocar Ia muerte, heridas graves yio daffos a la m#,quina. PRECAUCION un peligro si no se evita, puede provocar indies |esiones ligerasque, o moderadas. PRECAUCION cuando se utiliza sin el s{mbolo de aviso, indica una situaci6n que puede provocar daffos al tractor yto al motor. _='='='='='='='='=_ SUPERFICIES CALIENTES indica un peligro que, ,_I_,_,,, si no se evffa, puede provocar la muerte, lesiones graves ylo danos a la maquina. FUEGO ir_dica un peligro que, si no se evita, puede provocar Is muerte, lesiones graves y/o danos a la mdquina. 4O FAMIMARICESE CON SU TRACTOR LEA ESTE MANUAL LAS REGLAS DE SEGURIDAD ANTES DE OPERAR SU TRACTOR Compare las ilustraciones con su tractor para familiarizarse con las ubicaciones de los diversos controles y ajustes. Guarde este manual para referencia en el futuro. Nuestros tractores cumplen con los est&ndares de seguridad del American National Standard Institute, (A) PALANCA DEL LEVANTAMIENTO DEL ACCESORIO - Se usa para levantar, bajar y ajustar el conjunto segador o los dem&s accesodos montados en su tractor. (B) PEDAL DEL EMBRAGUF./FRENO - Se usa pare desembragar y frenar el tractor y para hacer arrancar e] motor. (C) PALANCA DEL FRENO DE ESTACIONAMIENTO - Asegura et pedal del embragueifreno en la posici6n dei freno. (D) CONTROL DE ACELERACION - Se usa para controlarla velocidad deI motor. (E) PALANCA DEL EMBRAGUE DEL ACCESORIO - Se usa para enganchar tas cuchi[las segadoras, o los dem&s accesorios montados en su tractor, 41 (F) INTERRUPTOR DE IGNICI6N - Se usa para hacer arrancar o hater parar el motor, ((3) SISTEMA DE FUNCIONAMIENTO HAClA ATP,AS (ROS) EN POSlCION "ON" - Permite la operaci6n dei conjunto segador o otto accesorio accionado mientras queen rev_s. (H) INTERRUPTOR DE LA LUZ - Enciende y apaga las luc_esdelanteras. (J) PALANCA DE CAMBtO - Selecciona la veIocidady la direcci6n del tractor, (M) CONTROL DE RUEDA LIBRE - Desengancha la trans-misi6n para empujar o arrastrar, ........ COMe USAR SU TRACTOR PARA AJUSTAR EL FRENO DE ESTACIONAMtENTO Su tractor viene equipado con un interruptersensor que exige Japresencia del operador. Cuando el motor es_ funcionando, si e] operador trata de bajarse del asiento sin primero aplicar el freno de estaoionamiento, ee apagar& el motor. 1, Presione el pedal (D) del frenoiembrague compietamente y sostengalo. 2. Jale hacia arriba la palanca de! freno de mane (H) y mant_ngala en esa posici6n; suelte gradualmente el pedal de| embrague/ freno (D), y tuego suelte fa palanca del freno de mane, El pedal tiene que quedar en la posici6n de freno, AsegSrese que e) freno : de estacionamiento va a sujetar el tractor en forma segura. AVISO:Si no se mueve la palanca de mando entre la posici6n de velocidad media y m_ima (r_.pida), antes de pamrse, se puede causar un "retorno de llama" del motor. • Gire Ja Ilave de ignici6n (F) a ta posici6n de apagado "STOP" y remueva la JlaveaI abandonar el tractor para evitar el use noautorizado. IMPORTANTE: Dejando el interrupter de la ignici6n en cualquier posici6n otra que "STOP" causar i que ta baterfa se descargue (muerta). AVISO: Bajo ciertas condiciones, cuando el tractor est_ parade con el motor andando en vacio, los gases de escape der motor caliente pueden hacer que el c_sped se ponga "oafS." Para eliminar esta posibilidad, siempre pare el motor cuando pare el tractor en &reas conc_sped. _IbPRECAUCI()N: Siempre pare e! tractor comp]etamente, seg_n se ha descrito anteriormente, antes de abandonar la posici6ndel eperador. PARA USAR EL CONTROL DE LA ACELERACION (D) Siempre opere el motor a una aceleraciSn completa. • Si el motor funciona a una velocidad inferiora la m_vJma (r&pida), su rendimiento disminuye. • El rendimiento 6primo se obtiene a la velocidad m_ima (r_pida). PARADA CUCHILLAS • Mueva DE LA SEGADORA Ia control a la posici6n del embrague desenganchado de] accesorio (1_"1). "Eogaoo,.do" (r ' )"Do.oogaoo,.do" (Engaged) (Disengaged) IMPULSION DE RECORRIDO - Para parar e] mecanismo impulsor, presione el pedal del freno completamente. • Mueva ia paianca de control de movimiento (J) a Japosici6n de neutro. MOTOR • Mover Fa patanca (D) de mando entre la posici6nde ve]ocidad media y m_xima (r&pida). 42 PAPA MOVERSE HACIA ADELANTE Y HACIA ATRAS La direcci6n y la velocidad dei movimiento son controladas pot medio de Ia palanca de control de movimiento (J). 1. Haga arrancar el motor con la palanca de control de movimiento en Ia posici6n de neutro. 2. Suelte el freno de estacionamiento. 3. Lentamente, mueva la palanca de control de movimiento a la posici6n deseada. AVISO: Ajuste ]as ruedas calibradoras con el tractor en una superficie nivelada plana. t. Ajuste la segadora a la altura de corte deseada con la manilla de ajuste de altura (Vea "PAPA AJUSTAR LA ALTURA DE CORTE DE LA SEGADOR,at' en la seccibn de Operacibn de este manual). 2. Con la segadora a fa altura deseada para la posicibn de corte, se tienen que montar las ruedas calibradoras de modo que queden un poco sobre el suelo. Instale las ruedas calibradoras en el agujero adecuado con et perno con resalto, la arandela de 3/8, y la tuerca de seguridad de 3/8-16 y apri6telos en forma segura. 3. Rep_Lael procedimiento para el lado opuesto instalando la rueda calibradora en el mismo agujero de ajuste. .......... PARA AJUSTAR LA ALTURA DE CORTE DE LA SEGADORA La posici6nde la palanca elevadora (A)determina a qu_ altura se cortar,_el c_sped. - Coloque la palanca etevadora en Ia ranura de la altura deseada. La gama de la altura de corte es de aproximadamente 1 a 4 pulgaclas. Las alturas se miden desde el suelo a la punta de la cuchilfa cuando el motor no est& funcionando. Estas alturas son aproximaclas y pueden variar dependiendo de ]as condiciones del suelo, de la altura del c_sped y del tipo del c_sped que se est& segando, • El c_sped promedio debe cortarse aproximadamente a 2-1/2 pulgadas durante la temporada ftia y sobre 3 putgadas durante los meses calurosos. Para obtener un c&sped m&s saludable y de mejor apariencia, siegue a menudo y despu_s de un crecimiento moderado. • F'ara obtener el mejor rendimiento de corte, el c_sped que tiene m&s de 6 pulgadas de altura debe segarse dos veces. Haga elprimer corte relativamente alto; el segundo a la altura deseada. PARA AJUSTAR LAS RUEDAS CALIBRADORAS Las ruedas calibradoras est&n bien ajustadas cuando se encuentran un poco a distancia del terreno af mismo tiempo que Ia segadora est_ a la attura de corte deseada. Entonces las ruedas calibradoras mantienen el conjunto segador en posicibn para prevenir el corte raspeo en casi todos los terrenos. PAPA OPEP_ARLA SEGADORA Su tractor viene equipada con un interruptor sensor que exige la presencia del operador. Si el motor estb funcionando y e] embrague del accesorio estb enganchado y el operador trata de bajarse det asiento, se apagarb, el motor. Tiene que mantenerse sentadocompletay centralmente en el asiento para impedir que el motor vacile o se apague cuando se opere su equipo en terreno disparejo, &spero o en cerros. 1. Seleccione la altura de corte deseada. 2. Baje la segadora con el control de levantam[ento del accesorio. 3. Haga arrancar las cuchil]asde la segadora enganchando el control del embrague del accesorio. PAPA PARAR LAS CUCHILLAS DE LA SEGADORA Desenganche el control det embrague del accesorio. _PRECAUCI6N: No opere la segadora sin, ya sea, el recogedor de c6sped compIeto en las segadoras asi equipadas o con la pmtecci6n contm la descarga (S) en su Iugar. 43 .......... FUNCIONAMIENTO ATRAS Tu tractor est,, equipado con el Sistema de Funcionamiento Atr_.s (ROS). Cualquier tentativa del operador de viajar marcha atrds con el embrague puesto apagar& el motora menos que ]a liave de ignici6nse pongaen laposici6nde "ON" del ROS. ATENCION: Ir marcha atrds con el embrague puesto para cortar, no es recomendable. Poniendo el ROSen posici6n "ON", para permitir el funcionamiento atr&s con el embrague puesto, se tiene que hacer s6]o cuando el operador 1oconsidera necesario para reposicionar la m&quina con el dispositivo embragado. No siegue en rev_s a menos que sea absolutamente necesario, USAR EL SISTEMA DE FUNCIONAMIENTO ATR#.S - PARA TRANSPORTAR Cuando empuje o arrastre sutractor asegSrese de desenganchar la transmisi6n poniendoel control de la rueda }ibreen Ia posici6n de marcha de rueda libre. El control de marcha de rueda Iibre esta situado en la barra de tracci6n trasera del tractor. 1. Levante la palanca de levantamiento del accesorio a su posici6n m&s alta. 2. Tire det mando de la rueda libre hacia afuera y hacia abajo hasta que se coloque en la guia y su@Ita[ode manera que se mantenga en la posici6n de desenganchada. • No empuje o arrastre el tractor a m&s de dos (2) MPH. Paravolver aaccionar latransmisi6n, invierta este procedimiento. Transmisibn Enganchada Utilice el tractor solamente si est_ seguro de que no ingresar&n niSos n] otras personas o animales al &tea deride se va a cortar el c_sped. 1. Mover la palanca de mando del movimiento en la posici6n neutro. 2. Con el motor en marcha, girar ]a Ilave det interruptÙr de Ia ignici6nen el sentido inverseat de las agujas deI reloj hasta la posici6n "ON". 3. Mire hacia abajo y hacia atr&s no s61o antes de ir marcha art&s, sine mientras est_ yendo marcha atr,_s. 4. Mover despacio la palanca de mando del movimiento hacia {a posici6n atr&s (R) para empezar el movimiento. 5. Cuando el use det ROSes m&s necesario, d_ vuelta a la tlave de ignici6n en el sentido de las agujas deI reloj hasta la posici6n "ON". Posic[6n ROS "ON" Transmisibn Motor en posici6n "ON" PARA OPERAR EN CERROS _ADVERTENCIA: No maneje hacia arriba o hacia abajo en certes con pendientessuperioresa t 5° y no maneje atravesando ninguna pendiente, Utiliee la guia de la pendiente proporcionada en {a parte posteriora de este manual, • Escoja Ia valocidad rods lenta antes de arranoar hacia arriba o hacia abajo en certes. - Evite parar o eambiar la velocidad en certes. - Si es absolutamentenecesarioel parar,empuje ei pedal det embrague/freno r&pidamente a Ia posici6n de freno y enganche el freno de estacionamiento. ° Mueva la palanca de control de movimiento a Ia posici6nde neutro. IMPORTANTE: La palanca de control de movimiento no vualve a la posici6nde neutToeuando e] pedal del embrague/freno esta presionado. • Para velvet a empezar con el movimiento, suelte lentamente, el freno de estacionamiento y e! pedal deI embragueifreno. • Lentamente, mueva Ia palanca de control de movimiento al ajuste m__slento. • Gire siempre Eentamente. Desenganchada AVISO: Para proteger el capota contra e] daho cuando transporte su tractor en un cami6n o remolcador, asegfirese que el capota est@cerrado y asegurado al tractor. Use los medios apropiados para amarrar el capota al tractor (cuerdas, cordeles, etc,). REMOLQUE DE CARRET|LLAS O OTROS ACCESOR|OS Remolque solamente los accesorios recomendados y especilicados per el fabricante del tractor. Use sentido comSn cuado este remolcando. Las cargas pesadas, cuando este yendo sobre una pendiente, son peligrosas, las ]]antas pueden pettier su traccio'n con el terreno y pueden ocasionar que pierda el control de su tractor. ANTES DE HACER ARRANOAR EL MOTOR REVISE EL NIVEL DE ACEITE DEL MOTOR El motor en su tractor ha side enviado desde la f_brica lleno con aceite de calidad para verano. 1. Revise el aceite de] motor con el tractor en terreno nivelado. 2. Remueva la tapa/varilla indicadora de hive} de relleno dal aceite y limpielas, vuelva a insertar Ia varilla indicadorade nivel y aternille Iatapa hasta que quede apretada, espere per unos cuantos segundos, remuL=valay lea el hive] del aceite. Si es necesario, agregue aceite hasta que se haya alcanzado la marca [Ieno (FULL) en la vari]la indicadorade niveI, No Io Ilene demasiado. . Para ]a operacibn en clima frio, debe cambiar el aceite para poder arrancar m&s f_.cilmente (Vea "Tabla de Viscosidad Del Aceite" en ]a secci6n de Mantenimento de este manual). ° Para cambiar el aceite del motor, vea Ia secci6n de Mantenimento en este manual 44 AGREGUE GASOLINA 6, • Llene el estanque de combustible. Llene hasta la parte inferior del cuel]o de relleno del estanque de gasolina. No !o Itene demasiado. Use gasolina regular, sin plomo, nueva y limpia con el m_nimo de 87 octanes. (El use de gasoaina con plomo aumentard, tos dep6sitos de 5xido de plomo y carbono y se reducird la duraciSn de Ia v&lvu]a). No mezcie e] aceite con la gasolina, Para asegurar que la gasolina utilizadasea fresca compre estanques los cuales puedan set uglizadosdurante los primeros 30 dias. •(_PRECAUCi6N: Limpie e] aceite o et combustible derramado. No almacene, derrame o use gasolina cerca de una llama expuesta. IMPORTANTE: Cuando se opere en temperaturas per debajo de 32°F (0°C) use gasolina de invierno Iimpia y nueva para auedar a asegurar un buen arranque en clima frio. PRECAUCI6N: Combustibles mezclados con alcohol (conocidos come gasohol o el use de etanol o metanol) pueden atraer ]a humedad, la que conduce a JaseparaciSn y formaci6n de dcidos durante et almacenamiento, La gasolina acidica puede dafiar e] sistema del combustible de un motor durante el almacenamiento. Para evitar los prob[emas con el motor, se debe vaciar el sistema de combustible antes de guardarlo per un per[ode de 30 dias o re&s, Vacie el estanque de combustible, haga arrancar el motor y h&galo funcionar hasta que Taslineas del combustible y el carburador queden vacios. La pr6xima temporada use combustible nuevo. Vea las tnstrucciones para el Almacenamiento para mgts informaciSn. Nunca use productos de limpieza para e] motor o para el carburador en el estanque del combustible pues se pueden producir dafios permanentes. PARA HACER ARRANCAR EL MOTOR AI hacer arrancar el motor per la primera vez o si se haacabadoel combustibledel motor, se necesitar& tiempo para el arranque extra para mover el combustible desde el estanque hasta el motor, 1. Aseg_rese que el control de rueda Iibre este en la posici6n enganchada. 2. Si_ntase en el silJSn en la posiciSn de operacidn, suelte el pedal deI freno y ponga el _'eno de estacionamiento. 3. Ponga la paLanca de control de movimiento en Faposici6n de neutro. 4. Mueva el embrague del accesorio a Ia posicidn desenganchado. 5. Mueva la palanca de control de la aceleracidn a la posici6n de estrangulaciSn. AVISO: Antes de arrancar, lea las instrucoiones siguientes para et arranque en ciima frio y templado, 45 Inserte la ltave en ]a ignic[dn y gire la Ilaveen e] sentido que giran las manillas del reloj a _a posici6n de arranque start, y suelte la I]ave tan pronto come arranque el motor. No haga funcionar el arrancador continuamente per m&s de quince segundos per minute. $ie[ motor no arranca despu_s de vados intentarlos,mueva el control de ]a aceleraci6n a la posici6nde r&pido, es.pereunos cuantos minutes y _ratede nuevo. _i el motor sigue sin funcionar, mueva e] control de la ace]eraci6n a la posiciSnde estrangulaci6n y intente de nuevo. ARRANQUE CON TiEMPO TEMPLADO (50° F/10°C y rods) 7. Cuando arranque el motor, mueva el control de la ace[eraci6n a Ia posiciSn de r&pido. • Los accesorios y ef embrague ahora pueden ser utitizados. Si el moor no acepta esta carga, vuelva a arrancar el motor para permitirle que se calienteper un minute utilizando el estrangulador come descdbido arriba. ARRANQUE CON TIEMPO FRiO (50 ° F/10°C y menos) 7. AI hater arrancar el motor, mantenga el control de la aceleraci6n a la posici6n de estrangulaciSn hasta que el motor se caliente y empieze funcionar maI. Una vez que empieze a funcionar mal, mueva inmediatamente et control de la aceleracibn a la posici6nrdpida. El calentamiento del motor puede tomar a partir de varies segundos a varies minutes (cuanto m&s fria es latemperatura, m&s largo es el calentamiento). OALENTAMIENTO AUTOMATIOA PARA LA TRANSMISiON Antes de conducir la unidad en un tiempo frio, ta transmisi6n debe ser calentada come las instrucclones siguientes: 1. Asegfirese que el tractor este situado en una supefficie nivelacla. 2. Alivie el freno de estacionamiento y deie que el freno vuelva a la posiciSn de operacldn, 3. Permita que la _ansmisi6n se calientedurante un minute, Esto puede ser echo durante el tiempo de calentamiento de[ motor, • Los accesodos pueden ser utilizados durante el periode del recalentamiento dei motor despu_s que la transmisi6n halla side ca[entada. AVISO: Si se encuentra a mucha altura (sobre 3000 pies) o en ctima frio (per debajo de 32"F [0"C]), la mezcla deI combustible del carburador debe ser ajustada para el meier rendimiento del motor. (Vea "PARA AJUSTAR EL OARBURADOR° en la secci6n de Servicio y Ajustes de este manual). PURGAR LA TRANSMISION _kPRECAUCI6N: Nunca enganche o desenganche la palanca deI control de rueda libre cuando el motor esta funcionando. Para asegurar la operaci6n y ejecuci6n adecuada, es recomendado que fa transmisi6n sea purgada antes de operar el tractor para la primera vez. Este proceso removerA cuaIquier aire adentro de Ia transmision que se halla formado durante el transporte de su tractor. IMPORTANTE: Si pot acaso su transmisi6n debe set removida para servicio o reemp]azo, debe ser purgada despu_s de la reinstalaci6n y antes de operar et tractor. 1. Para mayor seguridad, ubique el tractor en una superficie nivefada, despejada de cuaIquiet objeto y abierta, con el motor apagado y el freno de mano puesto. Desenganche la transmisi6n poniendo el control de rueda ]ibreen la posici6n de desenganchado (Vea"PAPA ELTPANSPORTE" en esta secci6n de este manual). 3. Sentado en el asiento del tractor, empiece el motor. Despu@s que este corriendo el motor, mueva el control de estrangulac[6n a ]a posici6n de lento. Con !a patanca de rueda libre en Ia posici6n de neutral, desenganche lentamente el embrague/el #eno del pedal. _,PRECAUOI6N: En el transcurso del paso 4, puede que de pronto se pongan en movimiento Ias ruedas. CONSEJOS PARA SEGAR • No se pueden usar Ias cadenas para las Ilantas cuando la caja de la segadora estA adjunta aI tractor. • La segadora debe estar nivelada en forma adecuada para obtener el mejor rendimiento al segar. Vea "PARA NIVELAR LA CAJA DE LA SEGADORi_' en la secci6n de Servicio y Ajustes de este manual. • El tado izquierdo de la segadora se debe usar para recorte. • Maneje de modo que los recortes se descarguen en el Area que ya ha sido cortada. Mantenga el Area de corte a ]a derecha del tractor. Esto producirA una distribuci6n mAs pareja de los recortes y un corte mAs uniforme. • AI segar Ias Area grandes, empiece girando a la derecha de modo que los recortes se descarguen, alejAndose de los arbustos, cercos, entradas de autom6viles, etc. Despu6s de una o dos vueltas, siegue en la direcci6n opuesta, haciendo virajes a la [zquierda, hasta que termine. f III JJJ O_272 4. Mueva ta palanca dei control de movimiento a Ia posici6n total de adelante y suj_tela durante cinco (5) segundos. Mueva la palanca hacia la posici6n tota[ de marcha atr&s y suj@teladurante cinco (5) segundos. Repita este proceso tres (3) veces. 5. Mueva la palanca del control de movimiento a Ia posici6n de neutro. Apague el motor y embrague el freno de estacionamiento. 6. Enganche la transmisi6n poniendo el control de rueda [ibre en la posic{6n de conducir (Vea "PARA TRANSPORTAR" en esta secci6n det manual). 7, Sentado en el asiento del tractor, empiece el motor. Despu@sque este cordendo el motor, mueva eI control de est.rangulaci6nmedia (t/2) velocidad. Con la palanca de control de movimiento a la posici6n de neutro, lentamente desenganche el embragueiet freno del peda!. 8. Mueva lentamente {a palanca de control de movimiento hacia ade]ante, despu@s que el tractor se mueva aproximadamente cinco (5) pies, mueva lentamente con Ia palanca de control de movimiento a la posicidn contraria, Despu@sque el tractor se mueva aproxJmadamonte unos cinco (5) pies vuelva a poner ta palanca de control de movimiento en ta posicidn de neLtro. Repita este procedimiento la palanca de control de movimiento tres (3) veces. Su transmisi6n esta ahora purgado y dispuesto para la operaci6n normal. 46 ° Si el c6sped estA demasiado alto, se debe segar dos veces para reducir [a carga y los posibles peligros de incendio debido a los recortes secos. Haga el primer corte relativamente alto; et segundo a la altura deseada. ° No siegue el c6sped cuando estA mojado. El c6sped mojado taponarA la segadora y dejarA rnontones indeseables. Permitaque seseque el c@sped antes de segarlo. • Siempre opere el motorcon una aceleraci6n eompleta cuando s_egue para asegurarse de conseguir un mejor rendimiento y una descarga apropiada de los materia]es. Regule la velocidad de recorrido seleccionando un cambio Io suficientemente bajo para obtener un rendimiento de corte de parte de su segadora y tambi_n ]a calidad de] corte deseada. ° Cuando opere con accesorios, seleccione una velocidad de recorrido que se acomode a] terreno y Ie permita obtener el mejor rendimiento del accesorio que se estA usando. PROGRAMADE cAc_ ANTES DE MANTENIMIENTO CADA U,,_,_,_,_,_,_,_,_,_ 8 HOP.AS R_=__o_c_ d_,r,_' ' 'l/ V_d|J_Z b c_mrnande de p;'es'er',ce rste_r e[ f_ si_ema d ROS "_,oo_,oy 0.io*=J ....... _oo C Afilartr..aJnbJ_t R Limpi_,rI'a b_4etia y los lerminales V _ Limpie _5 I_s t=_ldt_os Revisar el n_I I_ " de_,,sceile _sl molar del,,m_tor,(c_n flltro) C_mbiar dSt el _¢_ib_ m_tor _d_,. , V Iv" _ .... _#'t (sin fi_tro) _ll_l k,m_ar el fJl,rod, ain) InspeCtor CAOA T_t_IpoRAD A ALM_;ENAB,_,,m3 Vf3 de dimo_I_. O_mbi_,r el _;ei_ T u_a_ O I_ segad_r_ de _, pl_ 100 HORAS t/" ffoD_ _e CAD_ _" ' ............... V" R _,¢uch_l_ CAOA 25 50 HORAS ,,u, HORAS V If ...... C_DA ....... ,.... _=' rejilla de aTte ,2 ,Z _/_ ..... V'2 _1 si_n_ado[/ .............. R amortig.uader _echisp_ V L_mpiar tas a_et_s de eni_amier, lo _ _ ........ c=.b_,,,=,,,,=,i!,, , , e',, , Cambiar e_ r_Itmde c_mbus_l_ I II iiiii V' ..... v" TABLA DE LUBRICACION RECOMENDACIONES GENERALE$ La garantia de este tractor no cubre los artfculos que han estado sujetos al abuso o a la negIigencia del operador. Para recibir todo el valor de la garantia, el operador tiene que mantener la segadora seg(_n Jas instrucciones descdtas en este manual, Hay algunos ajustes que se tienen que hater en forma ped6dica para poder mantener su _'actor adecuadamente. AI menos una vez carla estaci6n comprobar si es necesario efectuar los adjustes descritos en las secciones de Servicio y Ajustes de este manual. - Una vez al aSo, cambie la bujJa, limpie o cambie el filtro de aire y revise si las cuchilla_ y Ias correas est&n desgastadas. Una bujia nueva y un filtro de aire limpio aseguran una mezcla de aim-combustible adecuada y le ayudan a que su motor funciene mejor y que dure m&s. ANTES DE CADA USO 1. Revise et nivel del aceite del motor. 2, Revise la operaci6n de los frenos. 3, Revise la presi6n de las Ilantas. 4. Verifique que el sistema de presencia deI operado y ROS funcionen adecuatamente. 5. Revise si hay sujetadores sueltos. OPemo a_ticuladode]volant (_) Accesoriod_ GrasadeI Arbol de Grasa del Rodamiento de la Rueda Delantem O Plancha de] engranaje de Sector de Direcci6n Grasadet Arbol Accesorio de Grasa del Rodamiento de la Rueda Delantera _) Motor Grasa de proposito general @ Refi_rase a la secci6n deI "MOTOR" en Mantenimiento IMPORTANTE: No aceite o engrase los puntos pivotes, los que tJenen rodamientos de nil6n especiales. Los lubricantes viscosos atraer_n poIvo y mugre, Io que acortara la duraci6n de los rodamientos. Si cree que lubricarse,use solamente un lubricante tipo grafito de po]vo seco en forma moderada. 47 VERIFIE_ZSISTEMA FUNOIONAMIENTO ATR_,S TRACTOR Siempre observe las reglas de seguridad cuando d@mantenimiento. OPERACI(_N DEL FRENO Si el tractor necesita m_s de cinco (5) pies para detenerse a la m&_ima velocidad al cambio mAs alto en una superficie nivelada, de hormig6n o pavimentada, hay que hacede el servicio al freno. Ver "PARA VERIFICAR SI FUNCIONA 81EN EL FRENO" en el capitulo de Servicio y ajustes de este manual. LLANTAS ....... • Mantengatodos losneum_ticos con lapresi6n de aJreadecuada (Ver la PSI que se indica en estos). • Mantenga las ttantas sin gasolina, aceite o substancias quimicas para control de insectos que pueden daSar la goma. • Evite los tocones, las piedras, tas grietas profundas, los objetos afifados y otros peligros que pueden dafiar alas tlantas. AVISO: Para arreglar tas Ilantas perforadas y p_ra prevenir que tenga llantas pinchadas a causa de pequeSas fugas, puede comprar el selto para ]lantas de su comerciante de partes de repuesto m&s cercano. Elselo previene que las Ilantas se sequen y tambi@n la corrosi6n. SlSTEMA PRESENCIA OPERADOR Y SlSTEMA FUNCIONAMIENTO ATRAS (ROS) Asegurarse de que el sistema de presencia del operador y el sistema funcionamiento atr&s funcionen bien. Si tu tractor no funci6n como deserito, reparar el problema inmediatamente. • El motor no arrancar& si el pedal de embrague/freno est& completamente presionado y el mando del embrague det accesorio estA desconectado_ VI_R]FII_Z SISTEMA PRESENCIA OPERADOR (ROS) • Cuando el motor est& en marcha con eLinterruptor de Haveen posici6nde motor "ON" y el embrague del accesorio conectado, cualqu_er tentativa de1operador de viajar marcha art&s, apagar& el motor. • Cuando el motor est& en marcha con el interruptorde Llavedel sistema de funcionamiento atr_.s (ROS) en la posic[6n "ON" y el embrague d elaccesodo conectado, cualquier tentativa deI operader de viajar marcha atr_.s,NO apagar& el motor. CUIDADO DE LA CUCHILLA Para obtener resultados 6ptimos, lae cuchil[as de la cortadora deben estar aflladas. Reemplace las cuchillas que est6n gastadas, dobladas o dafiadas. REMOCION DE LA CUCHILLA 1. Levante la segadora a su posic[6n m&s alta para permitir el aeceso alas cuchil[as. AMtSO: Proteja sus manes con guantes yio envuelva Ia cuchilia con una tela gruesa. 2. Remueva el perno de la cuchilla dandole vueltas en el sentido inverso al de las agujas det reloj. 3. Instale la nueva cuchilla con el estampado "THIS SIDE UP" en la direccion de la segadora y deI conjunto deI mandril. IMPORTANTE: Para asegurar ta instalacionapropiada, posicione el agujero central de la cuchitla con Ia estrella del conjunto del mandril. 4. Instale y apdete el pernode la cuchiI]a firmemente (Par 45-55 pies/libra.s). IMPORTANTE: El pemo especial de la cuchilla es termotratado. Agujero Central • Cuando el motor est,_ en marcha, cualquier tentativa dei operador de abandonar e] asiento sin haber puesto el freno de estacionamiento primero, apagar& el motor. • Cuando el motor est& en marcha y el embrague del accesorio est_ conectado, cualquier tenta_va del operador de abandonar el asiento, apagarA el motor. Pemo De La _." Cuchilla__...----_ _ • El embrague del accesorio no tendria que funcionar nunca si el operador no est& en su asiento. Posici6n ROS "ON" Motor en posici6n "ON" (Operaci6n Normal) 48 Estrella Conjunto Del Mandril BATERiA Su tractor cuenta con un sistema de carga de la bateria que es sufic[ente para el uso normal. Sin embargo, si se carga la baterfa peri6dicamente, con un cargador de autom6viles, se prolongar_. su duraci6n. • Mantenga la bater_a y los terminales limpios. • Mantenga los pemos de Ia bater|a apretados. ° Mantenga los agujeros de ventilaci6n peque_os abiertos. • Vuelva acargar de 6-10 amperes por 1 hora. AVISO; La bateria del equipo original de su tractor no becesita servicio. No intente abrlr o remover Ias tapas o cubiertas. No esnecesario aSadir o verificar el nivel del electr6Iito. PAPA LIMPIAR LABATERiAY LOSTERM1NALES La cerrosi6n y la mugre de la bateria y de los terminales pueden producir "escapes" de potencia en Ia bater_a. 1. Remueva la protecci6nde los terminales. 2. Desconecte el cable de la bateria NEGRO primero y luego e! cable de la baterla ROJO y remueva la bateria del tractor. 3. Enjuague la bateria con agua corriente y s_quela. 4. LJmpie los terminales y los extremos del cable de Ia bateria con un cepillo de alarnbre hasta clue queden brillantes. 5. Cubra los terminales con grasa o parafina. 6. Reinstale ia bateria (Vea "Reemplazar la Bateria" en la secci6n de Servioio y ajustes de este manual). CORREAS V Revise las correas V para verificar si existe deterioro y desgaste despu_s de 100 horas de operaci6n y c_.mbielas si es necesario. Las cotteas no son ajustables, Camb[e Ias correas si empiezan a deslizarse debido aI desgaste. ENFRtAMIENTO DEL TRANSEJE Las aletas de enfriamiento y el ventiIador de fa transmisi6n tienen que mantenerse limpios para asegurar el enfriamiento adecuado, No trate de limpiar el ventilador o la transmisi6n cuando el motor est_ func]onando o mientras la transmisi6n estL= caliente. • fnspeccione el ventiladorde enfriamiento para asegurarse que las aspas del ventiladorest_n intactas y limpias. • ]nspeccione ]as aletas de enfdamiento para verificar si hay mugre, recortes de c_sped u otros materiales. Para impedir dafios alas juntas, no use un rociadorde aire compresado o de alta presi6n para limpiar las aletas de enfriamiento MOTOR LUBRICACION Use solamente aoeite de detergente de a|ta calidad clasificado con la clasificaci6nSG-SL de servicioAPI_ Seleccione la calidad de viscosidad del aceite SAE segfin su temperatura de operacibn esperada, CALIDAOES DE VISCOS[DAD DE SAE AMISO: A pesar de que los aceites de multiviscosidad (5W30, 10W30, etc.) mejoran el arranque en clima_io, estos aceites de multiviscosidad van a aumentar el consumo de aceite cuando se usan en temperaturas sobre 32° F (0° C). Revise el nivel de[ aceite del motor m_s a menudo, para ev_ar un posible dafio en el motor, debido a que no tiene suflciente aceite, Cambie el aceite despu_s de 50 horas de operaci6n o por 1omenos una vez al aSo si el tractor se utiliza menos 50 horas el afio, Revise el nivel del aceite deI c_rter antes de arrancar el motor y despu6s de cada ocho (8) horas de uso continuado. Apriete la tapa del relleno! vafilla indicadora de nivel del aceite en forma segura cada vez que revise el nivel del aceite. PARA CAMBIAR ELACEITE DEL MOTOR Determine Ia gama de la temperatura esperada antes de cambiar et aceite. Todo el aceite debe cumplircon laclasificaci6ndeservicioAPI SG-SL, ° Asegdresequeeltractorest_en unasuperficie nivelada. • El aceite se drenar& m_s f&cilmente cuando est@caliente. • 1. Recoja el aceite en un envase adecuado. Remueva la tapa/varilla indicadora de nivel para relleno del aceite. Tenga cuidado de no permitirque lamugre entreen el motorcuando camb[e el aceite. 2. Deslice el accesodo de purga del aceite desde la posici6n de ensamblaje en el alojamiente de la turbina del motor y sep&relo del motor. PosiciSnde Ensamblaje NIVEL DEL FLUIDO DE LA BOMBA DEL TRANSEJE El transeje ha sido sellado en ta f&brica yet mantenimiento del f]uido no es necesario para la vida del transeje. En el caso de que el transeje se filtrase o necesitase servicio, haga el favor de ponerse en contacto con un centro de servicio Sears o con unotro centro de servicio cualificado. 3, 4. 49 Extensor de drenaje Para abdrlo, gire la tapa hacia la izquierda. Unavez que haya vaciado completamente el aceite, vuelva a co]ocar latapa y glrela hacia ]a derecha hasta el tope. 5. Vue[va afijar elaccesorio depurga delaceite 6. 7. SISTEMA DE ENFRIAMIENTO DE AIRE Losescombrospueden atescar el sistema de enfriamiento de aire de motor. Remueva la cubierta del sop]ador y limpie el ,_rea mostrada pare evitar el recalentamiento y defies al motor. en el alojamiento de Jaturbina del motor. Vuelva a Ilenar e[ motor con aceite a tray, s del tube de la vari_laindicadora de nivel pare relleno del aceite. Vacielo Ientamenteo No lo I]ene demasiado. Pare la capacidad aproximada Yeates "Especificaciones del Producto" secci6n de este manual. Rejiila de Use un medidor en latapa/varilta indicadora del nivel pare relleno delaceite pare revisareJniveL Mantenga el aceite en la linea de lleno (FULL) en Iavarilla indicadora de nivet. Apriete latapa en el tube en forme segura cuando termine. Limpie el desperdicio y los escombros Aire_ FILTRO DE ACEITE DEL MOTOR Cambie el filtro de aceite del motor cada ternporade o vez per rnedio que cambie el aceite, si el tractor se usa m_s de 100 horas en un afio. ........ FILTRO DE AIRE Su equipo no funcionar__correctarnente si el fittro de aire est_ sucio. Carla 25 horas de funcionamiento o en cada temporada, reemplace el pro Iimpiador; y el cartucho deride viene el papel [service paper cartridge] reempkScelo cada 100 heros de operacidn o en carla temporada, seg0n el memento en el que primero ello sea neceserio, Lo que ocurre con mayor probabilidad es que el limpiadordel servicio de aire est6 sucio. t. Quite Ia cubierta. 2. Con mucho cuidado, quite el cartucho deI filtro de aire y el pre timpiador de la base. 3. Limpie la base con touche cuidado para evitar que caiga ninguna particula en el carburador. Manilla SILENCIADOR Inspeccione y carnbie el sitenciador corroido y e[ amortiguador de chispas (si viene equipado) pues pueden crear un petigrode incendio y/o dafios. BUJiA(S) Cambie las bujia(s) al comienzo de cada temporada de siega o despu_s de carla 100 horas de operaci6n, io que suceda primero. El tipo de bujia y el ajuste de la abertura aparecen en "ESPECIF[CACIONES DEL PRODUCTO" secci6n de este manual. Cartucho -Prefiltro de Espuma NOTA: Si et cartucho est,. muy sucio o dahado, reempI_celo. 4. Coloque firmernente en la base el nuevo pro timpiador y el nuevo cartucho. 5. Cierre fa cubierta. IMPORTANTE: Pare limpiar el cartucho no se pueden user solventes derivados del petr61eo, come el kerosene, porque pueden deteriorar el cartucho. No engrase el cartucho; ni use aire a presi6n pare Iimptado. FILTRO DE COMBUSTIBLE EN UNEA El fi]tro de combustible debe cambiarse una vez cada temporada. Si el filtro de combustible se tapona, obstruyendoelflujo del combustible hacia et carburador, es necesario cambiar[o, 1. Con el motor frio, remueva el filtro y tapone las secciones de la ]inea de combustible. 2. Ponga el filtro de combustible nuevo en su posici6n en Ja linea de combustible con la flecha sefialando hacia el carburador. 3. AsegSrese de que no hayan fuges en ta Iinea del combustible y que las grapes est_n colocadas en forrna adecuada. 4. Inmediatamente limpie toda la gasoline tierramada. LtMPIEZA DE LA REJILLA DE AIRE La rejilla de aire debe mantenerse sin mugre y paia para evitar el dafio al motor debido al sobrecalentamiento. Limpielaconun cepi[Jode alarnbre o con aire comprirnidopara remover la mugre y _asfibres de 9oma secas, pegadas. 50 Abrazad era-_-.__ __'_ FiJtro de _." combustible !_V--y_ JJ _.J _ _,mcf ____ Abrazadera UMPIEZA - 4, Limpie todo material extrafio deI motor, la bateria, el asiento, el pulido, etc. - Umpie los desechos de la placa guia. Los desechos pueden Iimitar el movimiento del eje del pedal del freno!embrague, lo que hard que patJne la correa y que se pierda ta tracci6n. _kPRECAUCI6N: Evite todos los puntos de enganche y las piezas m6viles. Eche hacia atr_.s ta abrazadera de cierre deI adaptador de la boquilla y empuje 6ste en el puerto de lavado de la cubierta en el extremo izquierdo de ]a cubiertade la segadora. Suelte la abrazadera de cierre para fijar el adaptador en la boquilla. Puerto de Adaptador IMPORTANTE; Tire de la manguera para asegurarse de que la conexibn est& bien fija. 5. 6. PUNTOS DE PRECAUC|ON: I ENGANCHE SISTEMA DE DIRECCI6N, SALPICADERO, GUARDABARROS Y SEGADORA NO MOSTRADOS • • IMPORTANTE: Vuelva a comprobar la zona para asegurarse de que est& despejada. Mantenga las superficies pulidas y las ruedas sin derrames de gasolina, aceite, etc. Proteja Ias superficies pintadas con cera tipo automotriz. 7, Mueva e] control del embrague del accesorio a la posici6n"ENGANCHAR".Mant_ngase en la posici6n del operador con la cubierta de corte acoplada hasta que la cubierta ast_ Iimpia. 8. Mueva e] control del embrague del accesorio a la posici6n "DESENGANCHADO". Gire la ]lave de encendidoa laposicibn STOP para apagar ef motor deI tractor. Cierre la Ilave del agua. 9. Tire hacia atrds Ia abrazadera de cierre de] adaptador de la boqui]la para desconectar el adaptador del puerto de lavado de la cubierta. 10. LIeve el tractor a una zona seca, preferentemente de cemento o pavimentada. Mueva el control deJ embrague del accesorio a la posici6n "ENGANCHAR" para quitar el exceso de agua y ayudar a que se seque antes de guardar el _actor. No recomendamos que se utilice una manguera de jardin o agua a presi6n para limpiar el tractor a no ser que el motor y la transmisi6n est_n cubiertos para protegerlos del agua. El agua en el motor y la transmisidn acortan la vida fti[ deI tractor. Utilizar aire comprimido o un soplador de hojas para remover hierba, hojas y basura del tractor y cortac_spedes. PUERTO DE LAVADO DE LA CUBIERTA La cubierta de su tractor est& equipada con un puerto de lavado sobre la superficie que forma parte del sistema de lavado de la cubierta. Se deberia ulJlizarcada vez que se haya usado eltractor. _LADVERTENCIA: Si el accesorio de lavado estd roto o no estd, Ud. y otras personas estar_n expuestos a que la hoja los lance aquellos objetos con los que entre en contacto. Sustituya inmediatamente el accesoriode lavado roto o que falta antes de volver a usar la segadora, Tapetodos los orificios de la segadora con pernos y tuercas de seguridad, 1. Ueve el tractor a un lugar horizontaly despejado de su cdsped, Io bastante cerca de una boca de riego como para que i[egue la rnanguera del jardln. IMPORTANTE: Aseg_rese de que la boca de descarga del tractor est_ orientada LEJOS de su casa, garaje, coches aparcados, etc, Quite la boca de ensacado o cubierta de mantillo si est_ acoplada. 2. 3, Abra la Ilave del agua, Desde la posici6n del operador del tractor, vuetva a arrancar el motor y ponga fa patanca de acelerac[6n en la posici6n "Fast" (rdpido). Muevael control del embrague del accesorio a la posici6n ='DESENGANCHADO", ponga el freno de estacionamiento y apague el motor. Enrosque el adaptador de ta boquilla (empaquetado con et manual deI operador del tractor) en el extremo de la manguera del jard[n. 51 _t, ADVERTENCIA:PARA EVITAR LESI(_NES SERIAS, ANTES DE DAR CUALQUIER SERVICIO O DE HACER AJUSTES: 1. Presione el pedal del embrague/freno compietamente y aplique el freno de estacionamiento, 2. Ponga ta palanca de control de movimiento en ]a posici6nde neutro. 3. Ponga el embrague del accesodo en la posici6n desenganchado (DISENGAGED). 4. Ponga la ilave de ignici6n en la posici6n de apagado (STOP) y remu6vala. 5. Aseg_rese que Ias cuchillas y que todas las partes movibles se hayan detenido completamente. 6. Desconecte el atambre de la bujia y p6ngato en donde no pueda entrar en contacto con _sta. PARA DESMONTAR LA CORTADORA DE CF-SPED 1. Suelte et embrague poni_ndoloen la posici6n "DISENGAGED" ("DESACTIVADO"). 2. Baje Ia palanca elevadora de montaje a la posici6nde m&s abajo, 3. Ruede la correa de polea del motor (M) y fijadors de la correa (G). 4, Retire el resorte de sujeci6n (K), deslice ]a abrazadera (L) hasta quitada, y saque a presi6n ta guia de la caja (P) hasta que se salga deI soporte. 5. Retire et resorte del cable del embrague (Q) deI braze de] engranaje (R), 6. Desconecte la pieza de uni6n anterior (E) de ta cortadora - retire el resorte de contenci6n y la arandeta. 7. Per uno de los Iados de la cortadora, desconecte el braze de suspensi6n de la cortadora (A) deI chasis y la pieza de uni6n posterior (C) de la barra posteriorde la cortadora (D) - retire los resortes de contenci6n y las arandelas. _lb CUIDADO: Una vez que se desconecten las piezas de uni6n posteriores, la palanca elevadora funcionar& a resorte. Sujete con fuerza ta palanca elevadora al cambiarla de posici6n. 8. Deslice la cortadora per debajo del lade derecho deI tractor. tMPORTANTE-' Si se monta un accesorio diferente deI cortac_.sped al tractor, hay que quitar el estribo frontal (E) y los estribos traseros de elevaci6n (C) deI tractor y enganchar el resorte de embrague (Q) en la guia deI cable en el borde frontal del salpicadero m&s bajo. INSTALE LA SEGADORA Aseg_rese de que el tractor se encuentre en una superficie nivelada, y ponga el freno de mane, 1. Haga descender la palanca elevadora a su _posici6n m_s baja. CUIDADO: La palanca elevadora funciona a resorte. Suj_tela confuerza, h__galadescender lentamente y tr,_nquela en la posici6n m&s baja, NOTA: Cerci6rese de que los brazes de suspensi6n de los lades de Ia segadora (A) est_n dirigides hacia adelante antes de desEizarlaper 2. Deslice la SEGADORA per debajo del tractor hasta que quede bien centrada debajode _ste. 3. F[JE LOS BRAZES DE SUSPENSION LATERALES DE LA CORTADORA (A)AL CHASISUbique el orificio deI braze encima de la clavija (B) que hay en Ia parte exterior deI chasis del tractor, y fijelo con una resorte de contenci6n. % 52 4_ 5. Realice el mismo procedirniento en el otto Iado de] tractor. FIJE LAS PfEZAS DE PROPULSION POSTERIORES (C) - Levante la parte posterior de la cortadora, ubique la ranura de Ia pieza de uniSn (D) por encima de la clavija que hay en la barra posterior de Ia cortadora y fijera con una arandela y un resorte de contencibn. 9. Retire el resorte de sujeci6n (K), deslice la abrazadera (L) hasta quitarla, y saque a presiSn la gufa de la caja (P) hasta que se salga del soporte. 10. lnstale ta correa pas&ndolapor encima de ta polea del motor (M) y fijadors de la correa (G). IMPORTANTE: Vedfique que la correa encaje bien en todas las ranuras de Ias po]eas de ]a cortadora. 1 t. Suba Ia palanca elevadora a la posici6n de robs arriba. 12, Si es necesario, ajuste las rueditas del calibre antes de poner en funcionamiento la cortadora, como se ilustra en el capitulo de Manejo de este manual. 6. FIJE LA PIEZA DE UNI6N ANTERIOR (E) Trabaje por el lado izquierdo del tractor. Introduzca el extremo de Ia barra de la pieza de uni6n pot el orificioantedor de ta barra de suspensiSn anterior del tractor (F). 7. lntroduzca el otto extremo de Ia pieza de uniSn (E) en el orificio que se encuentra en la barra anterior de la cortadora (H), y fije{o por med]o de una arandela y un resorte de contenci6n (J). 8. Retire el resorte del cable del embrague (Q) del brazo de] engranaje :(R). 53 PARA NIVELAR LA SEGADORA Aseg_rese de que los neurn_ticosest_n inflados a la PSi que se indica en estos. Si est&n dernasiado infJadoso poco Jnflados, el c_sped no le quedar& bien cortado, to cual podr#, |levarlo a pensar que la SEGADORA no est& bien regutada. REGULACl(§N VISUAL DE LADe A LADe 1. Si todos los neurn&ticos est&n correctarnente inftados y el c(_sped parece haber quedado cortado desparejo, determine qu_ Jadede Ja cortadora est& cortando rn&sal ras. 5. Vuelvaaverificarlasmedidasyajustenuevarnente, en case necesario, hasta que arnbos lades queden iguales. AJUSTE DE DELANTE A ATRAS IMPORTANTE: El piso debe quedar bien hivelade de Jade a tado. Para que el c_sped le quede perfectamente cortado, las cuchillas de la cortadora deben ajustarse de tal rnanera que la punta anterior quede I/8" a 1/2" m_s abajo que la punta posteriorcuando la cortadora se encuantre en su posici6n rn_s alta. 2. Con una llave inglesa de 3/4'_o de calibre regulable, haga gtrar hacia la izquierda fa tuerca de ajuste de la pieza de uniSn (A) para bajar lade izquierdola cortadora, o bien h_.gala girar hacia lade derecho la derecha para subirla. NOTA: Carla vuelta cornp]eta de la tuerca de ajus_e bar& variar la altura de ]a cortadora aproximadarnente 3/16". Haga girar la tuerca hacia la derecha segadora ja_CUIDADO. Lasgua_es cuchiflaso son afiladas. Prot#se las manes con envuelva fa_scuchfIlas con tela gruesa, o bien haga ambas cosas. • Suba la SEGADORA a la posici6n rn_.salta. • UbJque cualquiera de Ias hojas de la cuchi!fa de tal rnanera que la punta quede apuntando directamente hacia adelante. Mida la distancia (B) que hay entre la punta anterior y el suelo y entre la punta posterior y el suelo. • Si la punta anterior de [a hoja de [a cuchil[a no est& t/8" a 1/2" rn_s abajo que la punta posterior, dirijase a la parte de adefante de! tractor. - Con una IJaveinglesa de 1 1/16" o de calibre regulable, afloje ta tuerca A, d&ndole varias vuettas para despejar la tuerca de ajuste B. • Con una ]lave inglesa de 3/4" o de calibre regulabte, haga girar la tuerca de ajuste de la pieza de uniSn anterior (B) en sentido horario (ajustar) para elevar la parte de adelante de la cortadora, o bien en sentido antihorario (aflojar) para bajarla, Haga girarla ! tuerca ilacia la izquierda _para baiar la segadora 3. Pruebe Ia regulaciSn reaIizada co_tando cu_spedque a0n no haya cortado y observando c6mo queda. Vuelva a ajustar, en case necesario, hasta obtener resultados satisfactorios. REGULACION DE LA PRECISION DE LADe A LADe 1. Con lodes los neum&ticos correotamente inffados, estacione el tractora nivel det sue!o oen la entrada a la casa. 41_CUIDADO: Las cuchitlas son afiladas. Prot_jase [asmanes con guantes o envuelva las cuchiIlas con tela gruesa, o bien haga ambas cosas. 2. Suba la SEGADORA a Ia posicibn m&s alta. 3. A arnbes Iados de ]a cortadora, ubique ta cuchiJla hacia un lade y rnida Ia distancia (A) que hay entre el borde inferior de la cuchiira y el suelo. Dicha distancia debe set ta rnisma a arnbos tados. 4. Aju_' de reguJaci6n de altura B para levantar la segadora En case que sea necesario realizar un ajuste, lea los paso 2 de las instrucciones de ReguJaci6nVisual que aparecen m&s arriba. e la tuerca de regulaciSn de altura B para NOTA: Carla vuelta cornpleta de la tuerca de ajuste hal& variar la altura de la cortadora 1/8". • Vuelva a verificar las rnedidas y ajuste nuevarnente, en case necesario, hasta que la punta anterior de Jahoia de ia cuchilla quede 1/8" a 1/2" rnzltsabajo que Ia punta posterior. • Mantenga en la posici6n la tuerca de ajuste per medio de una llave inglesa, y apriete bien la tuerca contra dicha tuerca de ajuste. 54 PARA CAMBIAR LA CORREA DE IMPULSI6N DE LA CUCHILLA SEGADORA La cortes de impulsi6n de [a cuohilla segadora se puede cambiar sin herramientas, Estacione el tractor en una superficie nivelada, Enganche el freno de estacionamiento. REMOCION DE LA CORREA 1. Remuevala segadora del tractor (Vea"PARA REMOVER LA SEGADORA_'de esta secci6n de este manual), 2. Haga satir ]a correa de las peleas del mandril y de Ias poleas de guia. 3. Tire la correa alej&ndola de Ia segadom. INSTALACtON DE LA CORREA 1. Haga rodar ]a correa alredeor de ambas poleas del mandrin y de las poleas-guias. 2. Aseg_rese las correas esten en todas 1as ranuras de las peleas y el interior todas tas guess de la correa. 3. Instale]asegadora (v6a"PARAINSTALARLA SEGADORA"en esta secoi6n de este manual). • Poteasde Gufa MONTAJE DE LA CORREA 1. Instale Ia cortes nueva de Ia parle de atr_.s a la parte de adelante del tractor, pas_.ndola per encima de la placa de dimcci6n (F) y del vdstago del pedal del embrague / freno (G). 2. JaIe la correa hacia la parts de adetante del tractor yp&selo porsobrela poleadel motor (E). 3. Jale la correa ha€is la parte de atrds del tractor. Con touche cuidado, mueva la cortes hacia abajo y pdsela alrededor del ventilador de transmisi6n y per encima de la poles de entrada (D). Cemi6rese de que la oorrea est6 calzada dentro del guardacorrea. 4. Coloque la _orrea sobre el pi56n central (C), 5. Pass ]a cortes a trav6s del pifi6n estacionado (A) y del pi66n del embrague (B). 6. Asegdrese de qua la correa ealce en todas las ranuras de las poleas y dentro de todas ras gufas y guardacorreas.. 5. Instale la SEGA,,,D_ORA (Ver "PARA MONTAR LA SEGADOFI,_'en este capitulodel manual). Poles del Mandril Mandril .... : PAPA REEMPLAZAR LACORREA DETRANSMmSl6N Estacione el tractor en una superficie niveIada. Ponga el freno de mane. Si necesita asistencia, del lade de abajo det apeyapi6s hay aria gula pr&ctica pars el montaje de ]a cortes. 9ESMONTAJE DE LA CORREA 1. Desmonte la cortadora (Ver"PARA DESMONTAR LA CORTADOP_' en este capitulo deI mmlual). NOTE: Observe toda la oorrea de transmisi6n y la posici6n de todas Ias guias y guardacorreas. 2. Retire Ia coffea deI pi66n estacionario (A) y del pih6n de embrague (B). 3. Retire la correa del pi_6n central (C). 6. Jate el cable de la cortes hacks la parte de atrds del tractor, Con touche cuidado, retire la cortes de la polea de entTada de la transmisiOn, movi6ndola hacia arriba y pas&ndola per encima de las paletas del ventilador (D). 4. Retire la correa de Ia poles del motor moviendola hacia abajo (E). 5, Deslice la cortes hacia la parte de atr&s del tractor, retirela de la placa de direool6n (F) y quitela del tractor. CONTROLAR Y AJUSTAR EL FRENO Si el tractor exige rods de cinco (5) pies para pararse a una velocidad rods alta en el cambio m_s alto en una superficie nivelada de hormigOn seco o pavimentada, entonces se debe controlar y ajustar el freno, CONTROL DEL FRENO 1, Aparcar el tractor en una superticie nivelada de hormig6n seco o pavimentada, presionar el pedal deI freno hasta el rondo y accionar el freno de estacionamiento. 2, Desembragar }a transmtsi6n colocando el mando de la rueda libra en la posici6n "transmisi6n desembragada". Tirar el mando de la rueda libre fuera y dentro la ranura y soltar asi se coloca en la posici6n desembragada. Las ruedas traseras tiene qua bloquearse y pm Unar cuando se intents empujar hacia adelante el tractor manualmente. Sustituir las zapatas del freno o oontactar con Sears o con un otto centre de servicio cualfficado. 55 Palanca de control de t PARA REMOVER LAS RUEDAS 1, Btoquee eleje en forma segura. 2. Remueva la cubierta del eje, el anillo de retenci6n y las arandelas para permitir la remoci6n de Ias ruedas (Ia rueda trasera contiene una Ilave cuadrada - no la pierda), 3. Repare ta llanta y vu_lvala a montar. AVISO: En las ruedas traseras solamente: alinee las ranuras en el cubo de la rueda trasera en el eje. lnserte la tlave cuadrada. 4. Vuelva a colocar ]as arandelas e inserte et anitlo de retenci6n en forma segura en [a ranura det eje. 5, Vuelva a co!ocar la cubierta del eje. AVISO: Para arreglar ias tlantas perforadas y p_ra prevenir que tenga Ilantas pinchadas a causa de pequeSas fugas, comprar de su commerciante Sears y utilJzar el setlo para llantas. Elsetlo previene que tas Ilantas se sequen y tambi_n ia corrosi6n. .... • Neutro Oierre •no de Velocidades AVISO: Desptazar el )lano de trabajo de Ia segadora hasta fa posici6n m&s baja para aumentar el juego al fin de acceder al pemo de regulaci6n, Si el tractor sigue desliz_.ndose adelante y atr_.s, despu@sde esta regulaci6n y con [a palanca en posici6n neutro, efectuar las operaciones indicadas de seguida. 1. Af_oiar el perno de regulaci6n. 2, Mover la palanca de control del movimiento de 1/4o 1/2 pulgaren ladirecci6n de deslizamiento. 3. Enroscar bien el perno de regulaci6n. 4. Poner en marcha el motor y probarlo. 5. Si el tractor sigue deslizando, repetir Ias operaciones ardba indicadas hasta atcanzar los resultados deseados. Arandelas Anillo de Retenci6n Cubierta del eje Uave Cuadrada(r__' trasera solamentet IMPRESlON / INCLINAOION DE LAS RUEDAS DELANTERAS La impresi6n e inclinaci6n de las ruedas detanteras de su nuevo tractor vienen asi de f_brica y son normales. La impresibny la inclinaci6nde las ruedas delanteras no son regulables. En caso que se produzca alg_n da5o que afecte la impresi6n o ta inclinaci6n de Ias ruedas delanteras tal como vinieron de f&brica, p6ngase en contacto con un centro de servicios Sears u otro centro de servicios autorizado. REGULACION DE LA PALANCA DE CONTROL DEL MOVIMIENTO NEUTRO DEL CAMBIO MECANICO La palanca de control del movimiento del cambio mec_nico ya viene predefinida por la Casa constructora y pot lo tanto no requiere ulteriores regulaciones. 1, A_'toiarligeramente el pemo de regulaci6n err la parte anterior de la rueda posteriorderecha; 2, Porter en marcha el motor y mover la palanca de control del movimiento del cambio mec&nico hasta flevarla en una posiclbn en la que no se pueda mover ni adefante ni atr&s; 3. Mantener la palanca de control det movimiento del cambio mec&nico en esta posici6n y apagar el motor; 4. Manteniendo [a palanca en la posici6n arriba indicada, aflojar el pemo de regulaci6n; 5. Mover la palanca de control del movimiento en posici6n neutro (cierre met&Iico); 6. Enroscar bien el pemo de regulaciOn. PARA HACER ARRANCAR EL MOTOR CON UNA BATER_ BAJA _,DVERTENC|A: Las batefias de &cido-plomo generan gases explosivos. Mantenga las chispas, fasllamas y los matedales para fumar alejados de las baterias. Siempre use una protecci6n para los ojos alrededor de Jasbatedas.Si su bateria est_ demasiado baja como para hacer arrancar elmotor tiene que volverse a cargar. (Vea "Bateria" en la secci6n de Mantenimiento de este manual). Si se usan "cables de empalme" para un arranque de emergencia, siga este procedimiento: IMPORTANTE: Su tractor esta equipado con un sistema de 12volts. El otro vehlculo tambi@ntiene que tenet un sistema de t2 vo[[s, No use la bateria de su tractor para hacerarrancar a otros vehicu[os. PARAADJUNTAR LOS CABLES DE EMPALME1. Conecte cada extrerno del cable ROJO con el terminal (A-B) POSITtVO (+} de cada bateria, preocup&ndose de no hacer cortocircuito en el chasis. 2. Conecte un extremo deI cable NEGRO con elterminal (C) NEGATIVO (-) de una bateria compfetamente cargada. 3. Conecte el otro extremo del cable (D) NEGRO con un buena CONEXION A TIERRA DEL CHASIS, alejado del estanque de combustible y de la bateria. PARA REMOVER LOS CABLES, INVIERTA EL ORDEN 1. El cable NEGRO primero deI chasis y luego de Ia bateda completamente cargada. 2. El cable ROJO al _ltimo de ambas baterias. 56 Bateria D_bil o Descargada Bateria Completamente Cargada REEMPLAZAR LA BATERIA _ADVERTENCIA: No haga cortocircuito conlos terminales de la baterfa al permitir que una liave de tuerca o cuatquierotto objeto entre en contacto conambos terminales a la misrnavez. Antes de instalarla bateria rernueva las pulseras de metal, los relojes de pulsera de metal, los ani[Ios, etc. El terminal positivetiene que conectarse pdmero para evitar las chispas debido a la conexi6n a tierra per accidente. 1. 2. 3. 4, 5, 6. 7, 8, Levantarnosta capotaa la posiciSnlevantada. Remueve la pmtecci6n de los terrninales. Desconecte el cable de la bateda NEGRO primero y tuego et cable de ta bateria ROJO y remueva la bater[a del tractor. Insta{e la nueva bateria con los t_rminos en misma posiciSn come la bater[a vieja, Reemplazamos cubierta terminal, Primero, conecte el cable de ta bateria ROJO con el terminal positive (+) con el perno hexagonal y la tuerca seg_n se muestra. Apri_telos en forma segura. Conecte e] cable de conexibn a tierra NEGRO al terminal negative (-) con el perno hexagonal y la tuerca que queden, Apri_telos en forma segura, Cerrarnos Ia capota. ENTREClERRE Y RELES El alambrado suelto o dafiado puede producir el real funcionamiento de su tractor, o que deje de funcionar, o le impida el arrancar. • Revise el alambrado. PARA REMOVER EL CONJUNTO DELCAPOTA Y DEL ENREJADO 1. Levante el capota. 2. Desabroche el conector del alambre de ]as luces delanteras, 3. P&rese delante del tractor. Agarre el capota en los lados, incl[nelo un poco hacia el motor y s&quelo del tractor. 4. Para velvet a instalar el capota, a_seg_rese de velvet a conectar el conector deLalambre de las [uces. _o/_a Cap°ta hectordeI arnbre de TRANSMISlON REMOCION/REEMPLAZO DE LA TRANSMtSKSN Si per acaso su transmisi6n debe set removida para servicio o reemplazo, debe ser purgada despu@sde la reinstaiaei6n y antes de operar el tractor. Vea"PURGAR LATRANSMISION" en la secci6n de la Operacibn de este manual. MOTOR PARA CAMBIAR LA BOMBILLA DE LA LUZ DELANTERA 1. Levante el capota. 2. Tire el sujetador de la bombilla fuera de] agujero en Ia parte trasera del enrejado, 3. Carnbie ta bornbilla en el sujetador y empuje el sujetador de la bombilla, en forma segura, hacia atr&s en el agujero en Eaparte trasera de] enrejado, 4, Cierre el capota. PARA CAMBtAR EL FUSIBLE C&rnbie{o per un fusible tipo enchufable de 30 amps, tipo automotriz, El sujetador del fusible est& ubicado detr&s del tablero. PARA AJUSTAR EL CABLE DE CONTROL DE LA ACELERACION El control de la aceleraci6n ha side preajustadoen la f&brica y no deberia necesitar ajustes. Revise los ajustes que se describen a continuaci6n, antes de soltar el cable, Si el ajuste es necesario, vea de manual de motor. PARA AJUSTAR EL CONTROL DE ESTRANGULACION El controtde la estrangulaci6n ha side preajustado en la f&bdca y no deberia necesitar ajustes, PARA AJUSTAR EL CARBURADOR 57 El carburador ha side preajustado en la f&brica y no deberia necesitar ajustes. Sin embargo, se pueden necesitar ajustes de rnenor importancia paracompensarper las diferencias en el combustible,temperatura,altura o carga. Si el carburador necesita ajustes, yea de manual de motor. Inmediatamente prepare su tractor para el almacenamiento a! final de la temporada o si el tractor no se va a usar per 30 d{as o mas. _IvADVERTENCIA: Nunca almacene el tractor con gaso]ina en el estanque dentro de un edificio en donde los gases pueden alcanzar una llama expuesta o una chispa. Permita que el motor se enfr{e antes de almacenado en cualquier recinto privado. TRACTOR Cuando el tractor se va a almacenar per cierto periodo de tiempo, limpieta cuidadosamente, quite toda la mugre, Ia grasa, tas hojas, etc. Gu&rdela en una &rea limpia y seca. 1. Limpie todo el tractor (vea "LIMPIE2_' en Ia secci6n de Mantenimiento en este manual). 2. Inspeccione y cambie las correas, si es necesario (yea las instrucciones para e{ cambio de las correas en la secciSn de Servicio y Ajustes de este manual). 3_ Lubr{que!o, seg_n se muestra en la secci6n de Mantenimiento de este manual. 4. AsegSrese que todas las tuercas, los pernos y los tornillos est_n sujetados en forma segura. lnspeccione las partes movibles para verificar si hay daSo, rotura o desgaste. C&mbielas si es necesario. 5. Retoque todas superficies pintadas oxidadas o picadas; aplique lija antes de pintar. BATER{A • Cargue la bateria completamente antes de guardarla. ° Despu_s de cierto periodo de tiempo en almacenamiento, la bater_a puede necesitar volver a cargarse. • Para ayudar a evitar la corrosiSn y las fugas de potencia durante largos periodos de almacenamiento, se deben desconectar los cables de ]a bater{a y se debe limpiar cuidadosamem te (yea "PARA LIMPtAR LA BATERtA Y LOS TERMINALES" en la secci6n de Mantenimientode este manual). - Despu_s de limpiarla, deje los cables desconectados y pSngalos en deride no puedan entrar en contacto con los terminales de fa bater{a. o Si se remueve Ia bataria del tractor para el almacenamiento, no Ia guarde directarnente sobre concrete o sobre superficies hQmedas. MOTOR SlSTEMA DE COMBUSTIBLE IMPORTANTE: Es important evitar que se forman depositos de goma an partes fundamentales del sistema de combus-tible tales come el carburador, el fi}tro del combustible, la manguera del combustibles mezclados con alcohot (conocido come gasohoI o que tienen etanol o metanol) pueden atraer humedad, Io que conduce a la separaci6n y a la formaciSn de acudos durante etalmacenamiento. La gasolina acidica puede da_ar el sistema de combustible de un motor durante el periodo de almacenamiento. 58 ° Vaciar el depSsito det carburante poniendo en marcha e] motor y dej&ndolo funcionar hasta gue el carburante termine el carburador est_ vac{o. • Nunca use los productos para [impieza del carburador o del motor en el estanque de combustible pues se pueden producir daSos permanentes. ° Use combustible nuevo la prSxima temporada. AMISO: El estabi[izador de combustible es una alternativa aceptable para reducir a un ml'nimo la formaciSn de dep6sitos de goma en e] combustible durante el per{ode de almacenamientoo Agregue estabilizador a ]a gasolina en el estanque de combustible o en el envase para el almacenamiento. Siempre siga la proporciSn de mezcla que se encuentra en el envase de[ estabilizador. Haga funcionar el motor per Io menos 10 minutes despu_s de agregar el estabilizador, para permitir que _ste [legue al carburador. No vaCiar la gasolina del estanque de gasolina y el carburador si se est,. usando estabilizador de combustible. ACEITE DEL MOTOR Drene el aceite (con el motor caliente) y c&mbielo con aceite de motor limpio. (Vea "MOTOR" en la secci6n de Mantenimiento" de este manual.) CILINDRO(S) 1, Remueva la(s) bujia{s). 2. Vacie una onza de aceite a trav6s deI agujere(s) de la bujia en el cilindro(s). 3. Gire la Ilave de ignioi6n a la pesici6n de '_rranque" (Start), per unos cuantos segundos para distribuir el aceite. 4. Cambie per bujia(s) nueva{s). OTROS • No guarde Is gasolina de una temporada a Ia otra. • Cambie el envase de la gaso}ina si se empieza a oxidar, La o×idaciSn yio la mugre en su gasolina producir&n problemas. ° Si es pesible, guarde su unidad en un recinto cerrado y eSbrala para protegerla contra el polvo y la mugre. • Cubra su unidad con un forte protector adecuado que no retenga la humedad. No use pI&stico. El plAstico no puede respirar, Io que permite la formaci6n de condensaci6n, Io que producir_, la oxidaci6n de su unidad. tMPORTANTE: Nunca cubra el tractor mientras el motor y Ias areas de escape todavia estan calientes. IDENTIFICACI(_N DE PROBLEMAS: Vea la seccien apropiada en el manual a menos que est_ dirigido a un centre de servicio Sears. PROBLEMA No arranca CAUSA t. 2. 3, 4. 5, 6, Bui_a male. Filtro de sire sucio. Filtro de combustible suoio. 4, 5. 6. Cambis ia bujla, LimpJeicambie el fiJtro de airs. Gamble el fiitm de combustible. 7, Ague en ef combustible. 7. 8. Alambrado sueffo o da_ado, 8. Vaciar el estanque de combustible y el carburador, vuelva a ]lenar el estanque con gasoline nueva cambie el filtro de combustible, Revise todo el afambrado. 9, Carburador desajustado, 9. 2. lO. DlfJcil de arrancar IEI motor no la vuelta El motor suena pero no arranca CORRECCION Sin combustible. Motor sin la =ESTRANGULACION" (CHOKE) adecuada. Motor ehogado, 1. 3. Vdlvulas de] motordesajustadas, lo. de Vea "PARA AJUSTAR EL GARBURADOR" en fa seccien de Sewicio y Ajustes. Pond;lassen contacto con un centre de serv_ciocualificado 'SEARS", 1, Filtro de a(re sucio. 1. Umpielcambie el fiitm de sire, 2, Bujia male, 2. Cambie ]a bujla, 8. 4, Bater{a baja 0 descargada. Filtrode Combustible sucio, 3, 4. Vuelva a ca,rgar0 cambie Ia hater(a. Cambie el filtm de combustible, 5. Combustible rancio o sudo, 5. 6. Alambrado suelto o daSado. 6. Vaciar elestanque de combustibley vuelva a l[enado con gasoline nueva. Revise todo el alambrado. 7. Carburador desajustado, 7. Vea "PARA AJUSTAR EL CAR BURADOR" en la secciende Servic_o y Ajustes, 8. V_lvulasde1motor desajuetadas. 8. Pongase en contact<) con un centre de servlcio cua]ificado"SEARS"÷ 1. Pedal de] freno no presionado, t. Presione el pedal del franc, 2. Elembraguedelacceso_oest&enganchado, 2. Desenganche eI embrague del accesorio, 3, 8atefia baja 0 descargada, .3. Vuelva a cargar o cambieta bateria. 4. 5. Fusible quemado. Terminales de la bateda corrofdos. 4, Cambie el fusible. 5, Limpie los terminates de la bateda. 6. Alambrado suelto 0 daSado, 6. Revise todo el alambrado, 7. 8. Interruptorde Ia igniciSn fai]ado, Solenoide o arrencador falIado8, 7. Revise/cambie elinterruptor de la igniciSn. 8. Revise/cambie el solenoids o arrancador. 9. ]nterruptor(es) qua exige(n} la presencia del operador fallado, 9. Pon_ase en contacto con un centre de setwcio cualificado =SEARS". !. 2. Bateda baja o descargada Termina]esde [a bateria corroidos, 1. Vuelva a cargar o cambie Ia hater(a. 2. LJmpie losterminaies de le hater,s. 3, A[ambrado sue]to o daSado, 3. Revise todo el alambrado, 4. ,,,Solenoide 0 anrancador fallados_ P_rdida fuerza L[ene el estanque de combustible. Vea "PARA HACER ARRANCAR EL MOTOR" en la secciSn de operacien. Espere vados minutos antes detratar de arrancer, 1. 2. 3. Corta touche cesped, muy r_.pJdo. Aceleracien en ta posicien de "ESTRANGULACION" (CHOKE), Acumu[acien de c_sped, hojas y basura debajo de la segadora. '_. 5. 6. FiLtrode sire sucio. Nivel de aceite bajo!aceite sucio. Bujfa fallada, 7. 8. Filtro de combustible sucio. Combustible rancio 0 sucio, 4. Reviseicambie e! solenoids 0 arrancador. 1. ' Elevelaalturadecorte/reduzcalavelocId_,d 2. Ajuste el control de la aceleraciSn. 3. Utopia la parte infm'ior de la c_ade segadora. 4. 5. Umpie/cambie el filtm de airs. Revise el nivel de aceiteicambie e( aceite. la 6. _Limpie y vuelva a ajustar la abertura 0 cambie le bujia. 7. Cambie el filtro de combustible. 8. i Vaciarelestanque decombustibleyvuelva a l[enarJo con gasoline aueva. 59 IDENTIFICACION DE PROBLEMAS: Vea la secci6n apropiada en el manual a menos qua est_ dirigido a un centre de servicio Sears. PROBLEMA P_rdida de fuerza (sigue) CAUSA _. Alarnbrado de la buj{a suelto, Rejilla!aletas de a{re deI motor sucias. Silenciador susio/taponado, A]ambrado suelto o da:Sado. Garburador desajustado. 15. Va[vu{as del meter desajustadas. , Vaciarelestanqued ecombustibIe yeI carburador, vuelvaa llenar elestanque congaso_ line nueva y cambJe el filtro de combustible. 10, : Conecte y ap_ete el alambre de Ia buj{a. ! 1. Limpie las rejilla/a]etas de airs deI motor. "_2. Limpis/cambie el silenciador. 13, Revise todo el alambrado. 14. Vea "PARAAJUSTAR EL CARBURADOR" en Ia secci6n de Servicio y Ajustes. 15. Pongase en contacto con un centre de servicio cualificado "SEARS", ,_,,,,, ,, 1. Cuchilla desgastada, dob]ada o suelta. 1. 2. & Mandril de la cuchilla doblado, 2. Parte(s) suelta(s)/dahada(s). s. El motor ¢ont|. n_afuncior_n_ cuando el operador so baja del asiento con el embrague de] accesodo enganchado El carte dispare|o 9_ 10. 11. 12. 13. 14. ,_,,,,,,,, Vlbra¢i6n excesiva CORRECC1ON Ague en e[ combustible. Sistema de control qua exige la presencia deI operador --seguridad re[lade, Cambie la cuchilla. Apriete el perno de la cuchilla. Cambie la mandrB de la cuehilla, Apriete la(s) parts(s). Cambie las partes da_,adas, Revise s{ alambrade, los interruptores y Ia conexiones.Si no est&n corfectas, Pongase en contacto con un centre de servicio cualificado "SEARS". 1, Cuchilla desgastada, dobIada o saelta, 1. 2. El conjunto segador no est&nivelado, Acumulaci6n de c6sped, hojas y basura debaja de Ia segadora. Mandtit de la cuchiIIa doblade. 2, ,3. Los agujeros de venfilaci6n deI coniunto segador taponadosdebido ala acumulaci6n dec6-sped, hojas y basura alrededorde tes mandriles. 5. Limpie alrededor de los manddles pars abrir losde ventilaciSm Obstrucci6n en elmecanismodelembrague. La correa de impulsi6nde la segadora est& desgastadaidafiada. Poles de gufa atascada. Mandril de Ia cuchilla atascado. 1, Remueva Ia obstrucci6n. 2. Gambie la correa de impulsi6n de la segadora. Cambie ia poles de gu{a, Cambie la mandril de la cuchiila. "L Veloc'idad del motor muy tenta. t". 2. Velocidad de recorrido demasiade r&pida. C_sped mojado. 2. 3. El con_unto 6egador no est&nivelado. PresiSn de airs de las Ilanta6 baja o dispareja. Cuchilla desgastada, doblada o suetta, 4, 5. Acumulaci6n de c_sped, hojas y basura debajo de Is segadora. La correa de impulsi6n de ta segadora est,, desgastada o desajustada. Las cuchilias est&n real eeninstaladas, 7. 3. 4. 5, 4. Cambie la cuchil[a, Apfiete el perno de ]a cuchiJla. Nivele el conjunto segadar, Limpie la parte inferior de la caiade Ia 6egadora. Cambie [a mandril de la cuchi[la, ii Las cuchillas segadoras no rotan Mala desearga del c_sped 3, 4. 5, 6. 7_ B, 9, s. 4. 6. a. a. 10, Cuchillas inadecuades en use, 10. 11. Los agu{eros de ventilaci6n del conjunto aguieros segador taponados debido ala acumulaci6n de c_sped, hejas y basura alrededor de los mandrileso .... 11, 6O i Ponga el c'ontrp[ de ]a aceleraci6n en la posiciSn de "RAPIDO" (fast). Cambie a una vetocidad m6s lenta, Permita qua se seque el c_spedantes de segar. Nivete el con,_untosegador, Revise las Ilantas pars verificarque tienan la presi6n de airs, Oambieiafile la cuchilla. Apriete el perno i de la cuchilla. Lirnpie Ia parts inferior de la cajade la segadora. Cambie/ajuste la cortes de impulsi6n de Ia segadora, Vuelva a instalarlas cuchi]laselbotde afilade hacfaabajo. Cambie per fas cuchillas enumeradas en este manual. Limpie alrededor de los mandriles pars abdr los de ventitaei6n, IDENTIFICACION DE PROBLEMAS: Vea la secci6n apropiada en el manual a menos que est_ dirigido a un centre de servicio Sears. PROBLEMA CAUSA CORRECC[ON Las luz (¢es) t, El interrupter est&"AP'AGADO"(OFF), de no |antera(s) funcionando 2. Bombilla(s) 0 I_.mpara(s) quemada(s). 3. 4. }nterruptor de la Iuz fallado. Alambmdo seelto 0 daSado. i'i"' "ENCIENDA" (ON) el interruptor_ 2. Oambie la bombllla(s) o f_mpara(s). 3. Revise!eatable el interrupter de la laz. 4. Reviseel aJambradoy las conexiones. 5. Fusible quemado, 5; Cambie el fusible. 1. 2. Elemento(s) de ]a bateria male(s), Malas conexiones de cables. t. 2. Cambie la baterla, 3. 4. Regulador fallado (si equipado). Atternador fallado. 3. 4. 1. Et control de rueda libra eat& enla posici6n "DESENGANOHADO" (disengaged). Residuos as en de la piaca de direcci6a (Si los tiene), La correa de impu[si6n de impulsiSn de mevimiento. Aire atrapade an la transporte oel servicio. Llave cuadrada de eje es ausente. 4. 5. El motor tien "contraexpies|ones" ¢uando se "APAGA" E[controlde la acelerasi6n del motor no rue ajustadoen la posici6nde vein cidad media y m_c<ima{r&pida) antes de para el motor, 1. i Mueva el control de ]a aceleraci6n a la _,posiciSn de ve[ocidad media y m,_xima (r_pida) antes de para el motor, El tractor se ponen mar€ha at r,_s El sistema de fu noionamiento atria (ROS) no est_ "ON", cuando enganehe ]a segadora n otto accesorie. La bateria no carga P_rdida de impulst6n 2. 3. 4. 5. ,.......... ....... ,,,,,, _. 2. 3. ,, ,,,,, Revise,qimpie todas las cables. Cambte el regulador` Cambie el a!,t,emador` Ponga el control de reeda libra enla poelciSn%NGANCHADO"(disengaged). Vea "L1MPIEZA?en ]a secci6n de Mantenimento de este manual, Reemplaca la eorrea de movimian-to esta gastada, da_ada o rota, Purgue la transmisiSn. Yea "PARA REMOVER LAS RUEDAS" en la secci6n de Servicio y Ajustes de este manual. ..... 61 1. ,,,,, Girar el RO$ en la posici6n "ON' Yea a secci6n de operaclon. 62 GUfA SUGERIDAPARA MEDIR LAS PENDIENTESCON LA VISTA PARAUNA OPERACIONSEGURA _ DVERTENCIA: Para evltar da_os graves, haga funclonar su tractor arriba y aba_o de |as penal|antes, nunca transversalmente con respects a las pendientes. No cortar pend[sntes mayores de 15 grados. Haga los viraJes gradua]mente pa_ ev]lar volcarse o ]a p_rdJda de control Tangs mucho cu]dado cuando camb[a de direccl6n en ras pendisntes_ 1, Plegar esta p_,glna a Io largo do la Ifnsa punteada arriba [ndicada. 2, Tenet la pdgina ante de sf m_smos de roods qua su horde Izquierdo sea vertical paralelo at tronco dal drbol u ot_'a estructura vertical 3. Mirar a travds del pliegue en dJrecef6n de la penctiente qLle se quiere medir. 4. Comparar el dngulo del pliegue con la pend|ente de| terreno_ 4 i NEED MORE HELP.:' ! You'll find the answe_ and _r_ore on managemyhome.com ! . Find this and a[[ your other product manuals - for free! online. i * Getanswers from our teamof homeexperts. i " Geta personalized maintenance p{anforyourhome. i " Find information andtools tohelp w_thhomeprojeL-t£ } manage _ home Your Home For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold itt For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters, 1-800-4-MY-HOME ® Anytime, dayornight (1-800--469-4663) (U,S,A.andCanada) www.sears.com www.seats.ca Our Home For repair of carry-in products like vacuums, lawn equipment, and electronics, call or go on-line for the nearest Sears Parts and Repair Center, t-800-488-'!222 Anytime, dayornight(U.S.A, only) www.sears.com To purchase a protection agreement (U,SA,) or maintenance agreement (Canada) on a product serviced by Sears: 1-800-827-6655 (U.SA,) 1-800-36t-6665 Para pedirserviciode reparaci6n a domidlio, y para ordenarpiezas: 1.888-SU.HOGAR ® (Canada) Au Canada poursauce en francis: 1-800-LB.FOYERec _vw.sea (t-68_784-6427) rs.ca ©Sea_ Brands,LLC ® Registerad Trademark t TM Trademark i sta Service Mark of Sears Staads, LLC ® Matca Regislmda ['tM Mama de F_b,ff;a / sMMarca de Serv_ciode 8ea_a Br'_ads,LLC ,_c Marqua de commerce / ao Marque d_pos6e de Sears Brands, LLC 09.12,11 BD Printed in the U.S.A.
This document in other languages
- español: Craftsman 917.28862