Download Epson MF1466-01 Product specifications
Transcript
MF1466-01 CMOS 8-BIT SINGLE CHIP MICROCOMPUTER S5U1C8F360Z1 Manual (Adapter Board for S1C8F360/8F361) NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. This material or portions thereof may contain technology or the subject relating to strategic products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export license from the Ministry of International Trade and Industry or other approval from another government agency. © SEIKO EPSON CORPORATION 2001 All rights reserved. New configuration of product number Starting April 1, 2001, the configuration of product number descriptions will be changed as listed below. To order from April 1, 2001 please use these product numbers. For further information, please contact Epson sales representative. Devices S1 C 88104 F 0A01 00 Packing specification Package (D: die form; F: QFP) Model number Model name (C: microcomputer, digital products) Product classification (S1: semiconductor) Development tools C 88348 S5U1 D1 1 00 Packing specification Version (1: Version 1) Tool type (D1: Development Tool) Corresponding model number (88348: for S1C88348) Tool classification (C: microcomputer use) Product classification (S5U1: development tool for semiconductor products) CONTENTS S5U1C8F360Z1 Manual (Adapter Board for S1C8F360/8F361) This manual describes how to use the Adapter Board (S5U1C8F360Z1) that is a PROM writing and evaluation tool for the 8-bit Single Chip Microcomputer S1C8F360/8F361. Contents CHAPTER 1 INTRODUCTION ____________________________________________ 1 1.1 1.2 CHAPTER Outline of S1C8F360 Adapter Board (S5U1C8F360Z1) ............................. 1 Components of S1C8F360 Adapter Board (S5U1C8F360Z1) ..................... 1 2 PRECAUTIONS ____________________________________________ 2 2.1 2.2 Precautions for Operation ............................................................................ 2 Differences from the ICE88UR (S5U1C88000H5) + PRC88816 (S5U1C88816P) ..................................................................... 2 CHAPTER 3 CONFIGURATION FOR THE S1C8F361 __________________________ 4 CHAPTER 4 NAME AND FUNCTION OF EACH PART ___________________________ 5 CHAPTER 5 SERIAL PROGRAMMING ______________________________________ 6 5.1 5.2 5.3 Setting the Jumpers ....................................................................................... 6 Connecting the Power Cable ........................................................................ 6 Pin Assignment of the CN4 Connector for Serial Programming ................. 6 CHAPTER 6 CONNECTING WITH THE TARGET SYSTEM _________________________ 7 CHAPTER 7 S1C8F360 ADAPTER BOARD (S5U1C8F360Z1) SCHEMATIC DIAGRAM _ 9 CHAPTER 8 PRODUCT SPECIFICATIONS ___________________________________ 10 S5U1C8F360Z1 MANUAL (ADAPTER BOARD FOR S1C8F360/8F361) EPSON i CHAPTER 1: INTRODUCTION CHAPTER 1 INTRODUCTION 1.1 Outline of S1C8F360 Adapter Board (S5U1C8F360Z1) The S5U1C8F360Z1 board (hereafter Adapter Board) is a PROM writing tool for the 8-bit Single Chip Microcomputers S1C8F360 and S1C8F361. The Adapter Board connected to the On Board Programming Writer (S5U1C88000W3) allows writing user data to the Flash EEPROM built into the S1C8F360/8F361 (package model) placed on its IC socket using the On Board Programming Writer Control Software (S5U1C8F360Y3). The Adapter Board can also be used as a software evaluation board by mounting peripheral circuits on the board. S5U1C8F360Z1 1.2 Components of S1C8F360 Adapter Board (S5U1C8F360Z1) After unpacking the S5U1C8F360Z1 package, check to see that all of the following components are included. (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) S5U1C8F360Z1 board ................................................................ I/O cable (80-pin/40-pin × 2 flat type) .................................. I/O cable (60-pin/30-pin × 2 flat type) .................................. I/O connector for target system (40 pins) ............................. I/O connector for target system (30 pins) ............................. Power cable ................................................................................. S5U1C8F360Z1 Manual (this manual) ................................... Warranty card ............................................................................. User registration card ............................................................... Note for use ................................................................................ S5U1C8F360Z1 MANUAL (ADAPTER BOARD FOR S1C8F360/8F361) EPSON 1 2 1 4 2 1 1 1 1 1 1 CHAPTER 2: PRECAUTIONS CHAPTER 2 PRECAUTIONS The connectors CN1, CN2 and CN3 have the same pin layout as the Peripheral Circuit Board for S1C88816/8F360 (S5U1C88816P). This allows connection between the user target system for the S5U1C88816P and the Adapter Board. Take the following precautions when using the S1C8F360 Adapter Board (S5U1C8F360Z1): 2.1 Precautions for Operation (1) Turn the power of all equipment off before connecting or disconnecting cables. (2) Do not turn the power on while the input ports (K00–K03) are all set to low level. It may cause a simultaneous key input reset. 2.2 Differences from the ICE88UR (S5U1C88000H5) + PRC88816 (S5U1C88816P) The emulation system using the Adapter Board with an actual IC differs in terms of functionality and characteristics from the S5U1C88816P emulation system, a fact which requires your attention. If these differences are ignored, there is a possibility that your circuit will not operate properly on an actual IC even though it might have performed well on the S5U1C88000H5 with the S5U1C88816P. (1) Power supply differences To operate the actual IC on the Adapter Board, an external power source voltage must be applied. Refer to "Electrical Characteristics" chapter in the "S1C8F360 Technical Manual" for the supply voltage. (2) I/O differences The output drive capability and pull up resistance are different. The input setup time is different therefore, when a circuit requiring consideration of the input response time, such as a key matrix, is used, the system and the software should be designed according to the specifications for the actual IC. (3) LCD differences The output drive capability is different. Since there will be differences with the actual IC even for the drive voltage, the system and the software should be designed in order to adjust the characteristics. (4) Analog comparator differences The response time and characteristics of the analog comparator are different. Consequently, the system and the software should be designed according to the specifications for the actual IC. (5) Functional differences <Oscillation circuit> • The Adapter Board does not contain oscillator parts. Mount the parts according to the selected mask option for the actual IC. • The OSC3 oscillation stability time of the S5U1C88816P is shorter than that of the actual IC. Therefore, the application program must take enough of interval (more than the oscillation stability time in the actual IC) between starting the OSC3 oscillation and switching the system clock to OSC3. • The logic level is different and it makes different oscillation timings such as the start and stop times. • When switching the operating clock from OSC3 to OSC1, be sure to switch OSC3 oscillation off with separate instructions. Using a single instruction to process simultaneously may cause a malfunction of the CPU. 2 EPSON S5U1C8F360Z1 MANUAL (ADAPTER BOARD FOR S1C8F360/8F361) CHAPTER 2: PRECAUTIONS • Do not turn the OSC3 oscillation circuit on in the low power mode. Do not switch over the operating mode (normal mode ↔ high speed mode) when the OSC3 oscillation circuit is on, as this will cause a malfunction. <Internal power supply circuit> The actual IC on the Adapter Board can change over the internal power voltage (set by VDC2, VDC1 and VDC0), but the S5U1C88816P cannot change the actual power voltage, because only the VDC2, VDC1 and VDC0 values are changed. For this reason, since the S5U1C88816P will operate, even if the stable time required for changeover is not taken, be sure that the stable time is provided by the software. Also, since the usable frequency of OSC1 and OSC3 depends on the internal power voltage, refer to the technical manual for the S1C8F360 or S1C8F361 and take care so as not to operate it with an inappropriate combination. When turning the OSC3 oscillation circuit on after switching the operating voltage, the software must take a voltage stabilization wait time of 5 msec. <LCD drive power> To drive an LCD using the Adapter Board, mount the parts required for VC1 to VC5 and CA to CE (CA to CG in the S1C8F361) on the board or supply an external LCD power. Note: The S1C8F360 Adapter Board supports the S1C8F361 as well. When using the board for the S1C8F361, the AVDD and AVSS pins on the board must be changed to the CF and CG pins, respectively, using the jumper and mount a capacitor to the holes indicated as C1. <Reset circuit> ___________ Mount parts such as a switch and a capacitor at the RESET pin on the Adapter Board. S5U1C8F360Z1 MANUAL (ADAPTER BOARD FOR S1C8F360/8F361) EPSON 3 CHAPTER 3: CONFIGURATION FOR THE S1C8F361 CHAPTER 3 CONFIGURATION FOR THE S1C8F361 The S1C8F360 Adapter Board (S5U1C8F360Z1) supports the S1C8F361 as well as the S1C8F360. In this case, the pins listed in the table below change their functions. Table 3.1 Pin function for S1C8F361 Print AVDD AVSS S1C8F360 AVDD AVSS S1C8F361 CF CG AVSS AVDD When using the S1C8F361, open the AVDD and AVSS jumpers and mount the booster capacitor for the CF and CG at C1. C1 CF CG Fig. 3.1 CF and CG for the S1C8F361 4 EPSON S5U1C8F360Z1 MANUAL (ADAPTER BOARD FOR S1C8F360/8F361) CHAPTER 4: NAME AND FUNCTION OF EACH PART CHAPTER 4 NAME AND FUNCTION OF EACH PART This chapter describes the name and function of each part of the S1C8F360 Adapter Board (S5U1C8F360Z1). (5) (4) (3) (1) (2) (6) (2) (2) (7) Fig. 4.1 Top view of the S5U1C8F360Z1 board (1) IC socket Insert an actual IC. Align Pin 1 with the bottom left corner of the socket (in top view) and insert IC. (2) Connectors for target system (CN1, CN2, CN3) These connectors are used to connect the I/O and LCD. Connect the target system using the I/O cables (80-pin/40-pin × 2 flat type and 60-pin/30-pin × 2 flat type). The pin assignment is the same as the S5U1C88816P connectors. Refer to Chapter 6, "Connecting with the Target System", for the pin assignment. (3) Connector for serial programming (CN4) This connector is used to connect the On Board Programming Writer (S5U1C88000W3). Use this connector when writing user data to the Flash EEPROM built into the microcomputer on the IC slot. Refer to Chapter 5, "Serial Programming", for the pin assignment. For how to use the On Board Programming Writer, refer to the "S1C8F360 Technical Manual". (4) Power connector (CN5) This connector is used to supply power to the S1C8F360 Adapter Board. Use the supplied power cable for connection. (5) Power system jumpers and check pins Set according to the power supply conditions. (6) Through holes for oscillator, LCD drive power and LCD voltage booster Use them to mount the parts such as oscillator parts, capacitors and resistors. Refer to "Basic External Wiring Diagram" in the "S1C8F360 Technical Manual" for the basic parts to be mounted. (7) IC socket pattern Cannot be used. S5U1C8F360Z1 MANUAL (ADAPTER BOARD FOR S1C8F360/8F361) EPSON 5 CHAPTER 5: SERIAL PROGRAMMING CHAPTER 5 SERIAL PROGRAMMING The S1C8F360 Adapter Board (S5U1C8F360Z1) connected to the On Board Programming Writer (S5U1C88000W3) allows writing user data to the Flash EEPROM built into the S1C8F360/8F361 (package model) placed on its IC socket using the On Board Programming Writer Control Software (S5U1C8F360Y3). Refer to "Appendix PROM programming" in the "S1C8F360 Technical Manual" for the programming procedure. 5.1 Setting the Jumpers Before performing serial programming, set the jumpers for the power unit as shown in Table 5.1.1. Note: Be aware that the configuration is different between the S1C8F360 and the S1C8F361. Table 5.1.1 Jumper settings for serial programming Jumper VDD VSS AVDD AVSS AVREF S1C8F360 short short short short short S1C8F361 short short open open short 5.2 Connecting the Power Cable Serial programming needs external power to be supplied to the CN5 connector on the S1C8F360 Adapter Board (S5U1C8F360Z1) using the supplied power cable. Table 5.2.1 Pin assignment of the CN5 power connector CN5 1 2 Power cable Red Black Power supply VDD VSS 5.3 Pin Assignment of the CN4 Connector for Serial Programming The CN4 connector is used to connect the SIO cable from the On Board Programming Writer (S5U1C88000W3). Table 5.3.1 Pin assignment of the CN4 connector for serial programming CN4 No. Pin name 1 VD1F 2 VDD CLKW 3 VSS 4 SCLK 5 VSS 6 TXD 7 VSS 8 RXD 9 VSS 10 RESET 11 VSS 12 SPRG 13 VSS 14 N.C. 15 N.C. 16 6 Function Programming power supply pin Power supply pin System clock output pin GND pin Serial I/F clock output pin GND pin Serial I/F data output pin GND pin Serial I/F data input pin GND pin Initial reset output pin GND pin Programming mode setup output pin GND pin EPSON S5U1C8F360Z1 MANUAL (ADAPTER BOARD FOR S1C8F360/8F361) CHAPTER 6: CONNECTING WITH THE TARGET SYSTEM CHAPTER 6 CONNECTING WITH THE TARGET SYSTEM The Adapter Board (S5U1C8F360Z1) can be used as an evaluation board by connecting it with the user target board. (1) To operate the microcomputer on the Adapter Board, the user must provide the peripheral circuits. Refer to "Basic External Wiring Diagram" in the "S1C8F360 Technical Manual" for the required circuits. (2) Use the supplied I/O cables (80-pin/40-pin × 2 flat type and 60-pin/30-pin × 2 flat type) for connecting between the S1C8F360 Adapter Board (S5U1C8F360Z1) and the target system. (3) Be sure to turn the power off before connecting the target system because the I/O cable includes a power line (VDD). I/O cables CN1-1 (40 pins) CN1-2 (40 pins) CN2-1 (40 pins) CN2-2 (40 pins) mark CN1 CN3-1 To target board (30 pins) CN2 CN3-2 (30 pins) CN3 Fig. 6.1 Connecting with the target system S5U1C8F360Z1 MANUAL (ADAPTER BOARD FOR S1C8F360/8F361) EPSON 7 CHAPTER 6: CONNECTING WITH THE TARGET SYSTEM Table 6.1 Pin assignment of the I/O connectors CN1 40-pin CN1-1 40-pin CN1-2 No. Pin name No. Pin name 1 VDD 1 R12 2 2 R13 VDD 3 VSS 3 R14 4 VSS 4 R15 5 5 R16 K00 6 6 R17 K01 7 7 R20 K02 8 8 R21 K03 9 9 R22 K04 10 10 R23 K05 11 11 R24 K06 12 12 R25 K07 13 13 R26 K10 14 14 R27 K11 15 15 R30 P00 16 16 R31 P01 17 17 R32 P02 18 18 R33 P03 19 19 R34 P04 20 20 R35 P05 21 21 R36 P06 22 22 R37 P07 23 23 R50 P10 24 24 R51 P11 25 25 COM0 P12 26 26 COM1 P13 27 27 COM2 P14 28 28 COM3 P15 29 29 COM4 P16 30 30 COM5 P17 31 31 COM6 R00 32 32 COM7 R01 33 33 COM8 R02 34 34 COM9 R03 35 35 COM10 R04 36 36 COM11 R05 37 37 COM12 R06 38 38 COM13 R07 39 39 COM14 R10 40 40 COM15 R11 8 CN2 40-pin CN2-1 40-pin CN2-2 No. Pin name No. Pin name 1 VDD 1 SEG27 2 2 SEG28 VDD 3 VSS 3 SEG29 4 VSS 4 SEG30 5 5 SEG31 RESET 6 MCU/MPU 6 SEG32 7 7 SEG33 OSC1 8 8 SEG34 OSC3 9 9 SEG35 VC1 10 VC2 10 SEG36 11 11 SEG37 VC3 12 VC4 12 SEG38 13 VC5 13 SEG39 14 SEG0 14 SEG40 15 SEG1 15 SEG41 16 SEG2 16 SEG42 17 SEG3 17 SEG43 18 SEG4 18 SEG44 19 SEG5 19 SEG45 20 SEG6 20 SEG46 21 SEG7 21 SEG47 22 SEG8 22 SEG48 23 SEG9 23 SEG49 24 SEG10 24 SEG50 25 SEG11 25 COM31 26 SEG12 26 COM30 27 SEG13 27 COM29 28 SEG14 28 COM28 29 SEG15 29 COM27 30 SEG16 30 COM26 31 SEG17 31 COM25 32 SEG18 32 COM24 33 SEG19 33 COM23 34 SEG20 34 COM22 35 SEG21 35 COM21 36 SEG22 36 COM20 37 SEG23 37 COM19 38 SEG24 38 COM18 39 SEG25 39 COM17 40 SEG26 40 COM16 EPSON CN3 30-pin CN3-1 30-pin CN3-2 No. Pin name No. Pin name 1 SEG51 1 N.C. 2 SEG52 2 N.C. 3 SEG53 3 N.C. 4 SEG54 4 N.C. 5 SEG55 5 N.C. 6 SEG56 6 N.C. 7 SEG57 7 N.C. 8 SEG58 8 N.C. 9 SEG59 9 N.C. 10 SEG60 10 N.C. 11 SEG61 11 N.C. 12 SEG62 12 N.C. 13 SEG63 13 N.C. 14 SEG64 14 N.C. 15 SEG65 15 N.C. 16 SEG66 16 N.C. 17 N.C. 17 N.C. 18 N.C. 18 N.C. 19 N.C. 19 N.C. 20 N.C. 20 N.C. 21 N.C. 21 N.C. 22 N.C. 22 N.C. 23 N.C. 23 N.C. 24 N.C. 24 N.C. 25 N.C. 25 N.C. 26 N.C. 26 N.C. 27 N.C. 27 N.C. 28 N.C. 28 N.C. 29 N.C. 29 N.C. 30 N.C. 30 N.C. S5U1C8F360Z1 MANUAL (ADAPTER BOARD FOR S1C8F360/8F361) 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 R12 R13 R14 R15 R16 R17 R20 R21 R22 R23 R24 R25 R26 R27 R30 R31 R32 R33 R34 R35 R36 R37 R50 R51 COM0 COM1 COM2 COM3 COM4 COM5 COM6 COM7 COM8 COM9 COM10 COM11 COM12 COM13 COM14 COM15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 2-1 2-2 2-3 2-4 2-5 2-6 2-7 2-8 2-9 2-10 2-11 2-12 2-13 2-14 2-15 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 2-24 2-25 2-26 2-27 2-28 2-29 2-30 2-31 2-32 2-33 2-34 2-35 2-36 2-37 2-38 2-39 2-40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 SEG27 SEG28 SEG29 SEG30 SEG31 SEG32 SEG33 SEG34 SEG35 SEG36 SEG37 SEG38 SEG39 SEG40 SEG41 SEG42 SEG43 SEG44 SEG45 SEG46 SEG47 SEG48 SEG49 SEG50 COM31 COM30 COM29 COM28 COM27 COM26 COM25 COM24 COM23 COM22 COM21 COM20 COM19 COM18 COM17 COM16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 CN4 S5U1C8F360Z1 MANUAL (ADAPTER BOARD FOR S1C8F360/8F361) EPSON VD1F VDD CLKW GND SCLK GND TXD GND RXD GND XRESET GND XSPRG GND 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 4 VDD 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 2-1 2-2 2-3 2-4 2-5 2-6 2-7 2-8 2-9 2-10 2-11 2-12 2-13 2-14 2-15 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 2-24 2-25 2-26 2-27 2-28 2-29 2-30 VSS 1-1 1-2 1-3 1-4 1-5 1-6 1-7 1-8 1-9 1-10 1-11 1-12 1-13 1-14 1-15 1-16 1-17 1-18 1-19 1-20 1-21 1-22 1-23 1-24 1-25 1-26 1-27 1-28 1-29 1-30 CN3 R11 R12 R13 R14 R15 R16 R17 R20 R21 R22 R23 R24 R25 R26 R27 R30 R31 R32 R33 R34 R35 R36 R37 VSS R50 R51 COM0 COM1 COM2 COM3 COM4 COM5 COM6 COM7 COM8 COM9 COM10 COM11 COM12 COM13 COM14 COM15 SEG0 SEG1 AVDD/CF 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 AVSS/CG 3 SEG51 SEG52 SEG53 SEG54 SEG55 SEG56 SEG57 SEG58 SEG59 SEG60 SEG61 SEG62 SEG63 SEG64 SEG65 SEG66 R11 R12 R13 R14 R15 R16 R17 R20 R21 R22 R23 R24 R25 R26 R27 R30 R31 R32 R33 R34 R35 R36 R37 VSS R50 R51 COM0 COM1 COM2 COM3 COM4 COM5 COM6 COM7 COM8 COM9 COM10 COM11 COM12 COM13 COM14 COM15 SEG0 SEG1 AVSS/CG JP4 AVREF JP5 AVREF 1-1 1-2 1-3 1-4 1-5 1-6 1-7 1-8 1-9 1-10 1-11 1-12 1-13 1-14 1-15 1-16 1-17 1-18 1-19 1-20 1-21 1-22 1-23 1-24 1-25 1-26 1-27 1-28 1-29 1-30 1-31 1-32 1-33 1-34 1-35 1-36 1-37 1-38 1-39 1-40 C1 AVDD/CF JP3 VOSC VOSC VOSC VD1 VD1 VD1F OSC1 OSC2 /TEST /RESET MCU/MPU K11 K10 K07 K06 K05 K04 K03 K02 K01 K00 P17 P16 P15 P14 P13 P12 P11 P10 AVDD AVSS AVREF VDD P07 P06 P05 P04 P03 P02 P01 P00 R00 R01 R02 R03 R04 R05 R06 R07 R10 SEG45 SEG44 SEG43 SEG42 SEG41 SEG40 SEG39 SEG38 SEG37 SEG36 SEG35 SEG34 SEG33 SEG32 SEG31 SEG30 SEG29 SEG28 SEG27 SEG26 SEG25 SEG24 SEG23 SEG22 SEG21 SEG20 SEG19 SEG18 SEG17 SEG16 SEG15 SEG14 SEG13 SEG12 SEG11 SEG10 SEG9 SEG8 SEG7 SEG6 SEG5 SEG4 SEG3 SEG2 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 2 VDD VDD VSS VSS XRESET MCU/MPU OSC1 OSC3 VC1 VC2 VC3 VC4 VC5 SEG0 SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 SEG7 SEG8 SEG9 SEG10 SEG11 SEG12 SEG13 SEG14 SEG15 SEG16 SEG17 SEG18 SEG19 SEG20 SEG21 SEG22 SEG23 SEG24 SEG25 SEG26 VSS 6 VD1 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 1 2-1 2-2 2-3 2-4 2-5 2-6 2-7 2-8 2-9 2-10 2-11 2-12 2-13 2-14 2-15 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 2-24 2-25 2-26 2-27 2-28 2-29 2-30 2-31 2-32 2-33 2-34 2-35 2-36 2-37 2-38 2-39 2-40 VCC JP2 GND VDD VCC JP1 5 GND VD1F OSC1 OSC2 XTEST XRESET MCU/MPU K11 K10 K07 K06 K05 K04 K03 K02 K01 K00 P17 P16 P15 P14 P13 P12 P11 P10 AVDD/CF AVSS/CG AVREF VDD P07 P06 P05 P04 P03 P02 P01 P00 R00 R01 R02 R03 R04 R05 R06 R07 R10 1-1 1-2 1-3 1-4 1-5 1-6 1-7 1-8 1-9 1-10 1-11 1-12 1-13 1-14 1-15 1-16 1-17 1-18 1-19 1-20 1-21 1-22 1-23 1-24 1-25 1-26 1-27 1-28 1-29 1-30 1-31 1-32 1-33 1-34 1-35 1-36 1-37 1-38 1-39 1-40 4 OSC1 OSC2 A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 CN2 3 VCC XTEST K00 K01 K02 K03 K04 K05 K06 K07 K10 K11 MCU/MPU XTEST XSPRG XSPRG XRESET XRESET 5 6 SEG44 SEG43 SEG42 SEG41 SEG40 SEG39 SEG38 SEG37 SEG36 SEG35 SEG34 SEG33 SEG32 SEG31 SEG30 SEG29 SEG28 SEG27 SEG26 SEG25 SEG24 SEG23 SEG22 SEG21 SEG20 SEG19 SEG18 SEG17 SEG16 SEG15 SEG14 SEG13 SEG12 SEG11 SEG10 SEG9 SEG8 SEG7 SEG6 SEG5 SEG4 SEG3 SEG2 K11 K10 K07 K06 K05 K04 K03 K02 K01 K00 MCU/MPU VOSC VSS VDD VD1 OSC4 OSC3 VC1 VC2 VC3 VC4 VC5 CA CB CC CD CE TXD SCLK RXD VEPEXT CLKW XSPRG VD1F COM16 COM17 COM18 COM19 COM20 COM21 COM22 COM23 COM24 COM25 COM26 COM27 COM28 COM29 COM30 COM32 SEG50 SEG49 SEG48 SEG47 SEG46 XTAL1 CG1 7 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 VOSC VSS VDD VD1 OSC4 OSC3 VC1 VC2 VC3 VC4 VC5 CA CB CC CD CE TXD SCLK RXD VEPEXT CLKW XSPRG VD1F COM16 COM17 COM18 COM19 COM20 COM21 COM22 COM23 COM24 COM25 COM26 COM27 COM28 COM29 COM30 COM31 SEG50 SEG49 SEG48 SEG47 SEG46 U1 S1C8F360 7 VEPEXT CE OSC4 OSC3 VC1 VC2 VC3 VC4 VC5 CA CB CC CD VSS VDD XTAL2 Rf VCC GND VEPEXT CD CA CC CE CA CB Cp 1 2 CN5 8 CG2 CD2 8 R1 VC5 VC4 VC3 VC2 VC1 2 B VDD VDD VSS VSS K00 K01 K02 K03 K04 K05 K06 K07 K10 K11 P00 P01 P02 P03 P04 P05 P06 P07 P10 P11 P12 P13 P14 P15 P16 P17 P20 P21 P22 P23 P24 P25 P26 P27 R10 R11 CN1 2 1 C D 1 A B C D CHAPTER 7: S1C8F360 ADAPTER BOARD (S5U1C8F360Z1) SCHEMATIC DIAGRAM CHAPTER 7 S1C8F360 ADAPTER BOARD (S5U1C8F360Z1) SCHEMATIC DIAGRAM 9 CHAPTER 8: PRODUCT SPECIFICATIONS CHAPTER 8 PRODUCT SPECIFICATIONS The component specifications of the S1C8F360 Adapter Board (S5U1C8F360Z1) are listed below. S5U1C8F360Z1 Dimensions: 183 mm (L) × 154 mm (W) × 48 mm (H) Power supply: Within the operating voltage range of the microcomputer I/O cable (80-pin/40-pin × 2, 2 sets) S5U1C8F360Z1 connector: KEL 8830-80-170L or equivalent Cable connector (80-pin): KEL 8822E-080-171 Cable connector (40-pin): 3M 7940-6500SC Cable: 40-pin flat cable Length: Approx. 40 cm ×1/1 set ×2/1 set ×2/1 set (both cables are the same length) I/O connection cable (60-pin/30-pin × 2, 1 set) S5U1C8F360Z1 connector: KEL 8830-60-170 Cable connector (60-pin): KEL 8822E-060-171 ×1/1 set Cable connector (30-pin): 3M 7930-6500SC ×2/1 set Cable: 30-pin flat cable ×2/1 set Length: Approx. 40 cm Power cable S5U1C8F360Z1 connector: J.S.T. Mfg Co., Ltd B2B-XH-A Cable connector: J.S.T. Mfg Co., Ltd XHP-2 Contacts: J.S.T. Mfg Co., Ltd SXH-001T-P0.6 Length: Approx. 35 cm Accessories I/O connectors for the target system (40-pin): 3M 3432-6002LCSC (30-pin): 3M 3440-6002LCSC ×4 ×2 10 EPSON S5U1C8F360Z1 MANUAL (ADAPTER BOARD FOR S1C8F360/8F361) International Sales Operations AMERICA ASIA EPSON ELECTRONICS AMERICA, INC. EPSON (CHINA) CO., LTD. - HEADQUARTERS - 23F, Beijing Silver Tower 2# North RD DongSanHuan ChaoYang District, Beijing, CHINA Phone: 64106655 Fax: 64107319 150 River Oaks Parkway San Jose, CA 95134, U.S.A. Phone: +1-408-922-0200 Fax: +1-408-922-0238 SHANGHAI BRANCH 4F, Bldg., 27, No. 69, Gui Jing Road Caohejing, Shanghai, CHINA Phone: 21-6485-5552 Fax: 21-6485-0775 - SALES OFFICES West 1960 E. Grand Avenue EI Segundo, CA 90245, U.S.A. Phone: +1-310-955-5300 Fax: +1-310-955-5400 Central 101 Virginia Street, Suite 290 Crystal Lake, IL 60014, U.S.A. Phone: +1-815-455-7630 Fax: +1-815-455-7633 Northeast 301 Edgewater Place, Suite 120 Wakefield, MA 01880, U.S.A. Phone: +1-781-246-3600 Fax: +1-781-246-5443 EPSON HONG KONG LTD. 20/F., Harbour Centre, 25 Harbour Road Wanchai, Hong Kong Phone: +852-2585-4600 Fax: +852-2827-4346 Telex: 65542 EPSCO HX EPSON TAIWAN TECHNOLOGY & TRADING LTD. 10F, No. 287, Nanking East Road, Sec. 3 Taipei Phone: 02-2717-7360 Fax: 02-2712-9164 Telex: 24444 EPSONTB HSINCHU OFFICE Southeast 3010 Royal Blvd. South, Suite 170 Alpharetta, GA 30005, U.S.A. Phone: +1-877-EEA-0020 Fax: +1-770-777-2637 13F-3, No. 295, Kuang-Fu Road, Sec. 2 HsinChu 300 Phone: 03-573-9900 Fax: 03-573-9169 EPSON SINGAPORE PTE., LTD. No. 1 Temasek Avenue, #36-00 Millenia Tower, SINGAPORE 039192 Phone: +65-337-7911 Fax: +65-334-2716 EUROPE EPSON EUROPE ELECTRONICS GmbH SEIKO EPSON CORPORATION KOREA OFFICE - HEADQUARTERS Riesstrasse 15 80992 Munich, GERMANY Phone: +49-(0)89-14005-0 Fax: +49-(0)89-14005-110 SALES OFFICE Altstadtstrasse 176 51379 Leverkusen, GERMANY Phone: +49-(0)2171-5045-0 Fax: +49-(0)2171-5045-10 UK BRANCH OFFICE Unit 2.4, Doncastle House, Doncastle Road Bracknell, Berkshire RG12 8PE, ENGLAND Phone: +44-(0)1344-381700 Fax: +44-(0)1344-381701 50F, KLI 63 Bldg., 60 Yoido-dong Youngdeungpo-Ku, Seoul, 150-763, KOREA Phone: 02-784-6027 Fax: 02-767-3677 SEIKO EPSON CORPORATION ELECTRONIC DEVICES MARKETING DIVISION Electronic Device Marketing Department IC Marketing & Engineering Group 421-8, Hino, Hino-shi, Tokyo 191-8501, JAPAN Phone: +81-(0)42-587-5816 Fax: +81-(0)42-587-5624 ED International Marketing Department Europe & U.S.A. FRENCH BRANCH OFFICE 1 Avenue de l' Atlantique, LP 915 Les Conquerants Z.A. de Courtaboeuf 2, F-91976 Les Ulis Cedex, FRANCE Phone: +33-(0)1-64862350 Fax: +33-(0)1-64862355 BARCELONA BRANCH OFFICE Barcelona Design Center Edificio Testa, Avda. Alcalde Barrils num. 64-68 E-08190 Sant Cugat del Vallès, SPAIN Phone: +34-93-544-2490 Fax: +34-93-544-2491 421-8, Hino, Hino-shi, Tokyo 191-8501, JAPAN Phone: +81-(0)42-587-5812 Fax: +81-(0)42-587-5564 ED International Marketing Department Asia 421-8, Hino, Hino-shi, Tokyo 191-8501, JAPAN Phone: +81-(0)42-587-5814 Fax: +81-(0)42-587-5110 In pursuit of “Saving” Technology, Epson electronic devices. Our lineup of semiconductors, liquid crystal displays and quartz devices assists in creating the products of our customers’ dreams. Epson IS energy savings. S5U1C8F360Z1 Manual (Adapter Board for S1C8F360/8F361) ELECTRONIC DEVICES MARKETING DIVISION EPSON Electronic Devices Website http://www.epson.co.jp/device/ Issue July, 2001 Printed in Japan L A