Download Canon CDI-E075-010 Service manual
Transcript
CHAPTER 2. TECHNICAL DESCRIPTION CONTENTS 1. Functions of each unit 1.1 MAIN PCB ASS’Y --------------------------------------------------------------------------------------------------------- 2-1 1.2 DC/DC CONVERTER PCB ASS’Y ------------------------------------------------------------------------------------- 2-1 1.3 LCD PCB ASS’Y ----------------------------------------------------------------------------------------------------------- 2-1 1.4 TOP MODULE UNIT ------------------------------------------------------------------------------------------------------ 2-1 1.5 EF FPC ----------------------------------------------------------------------------------------------------------------------- 2-1 1.6 STJ PCB ASS’Y ------------------------------------------------------------------------------------------------------------ 2-1 2. Outline of Circuits 2.1 Power Supply Control ------------------------------------------------------------------------------------------------------ 2-2 2.1.1 Power Supply Block Diagram ----------------------------------------------------------------------------------- 2-2 2.1.2 Power Supply Control Sequence -------------------------------------------------------------------------------- 2-2 2.2 Signal Processing ------------------------------------------------------------------------------------------------------------ 2-3 2.2.1 System Control ----------------------------------------------------------------------------------------------------- 2-3 2.2.2 Picture Processing ------------------------------------------------------------------------------------------------- 2-4 2.2.3 Audio Processing (Recording and Playback Functions) ------------------------------------------------------ 2-4 3. Troubleshooting ------------------------------------------------------------------------------------------------------------------- 2-5 3.1 When an Error Code is Displayed ---------------------------------------------------------------------------------------- 2-5 3.2 When a Problem Occurs ---------------------------------------------------------------------------------------------------- 2-7 CHAPTER 2. TECHNICAL DESCRIPTION 1. Functions of each unit 1.1 MAIN PCB ASS’Y 1) 2) 3) 4) Driving the CCD Sensor. Conversion of the image signal from the analog signal to the digital signal. Controlling the power supply and the system by CPU. (Refer to Sections 2.1 and 2.2.) Image processing, and reading and writing the image signal to and from the CF card using DSP. (Refer to Section 2.2.2.) 5) Video output. (Refer to Section 2.2.2.) 6) Microphone input and sound output. (Refer to Section 2.2.3.) 1.2 DC/DC CONVERTER PCB ASS’Y 1) Power supply drive (DC/DC converter). 2) Battery charging control circuit. 1.3 LCD PCB ASS’Y 1) Image display. 2) Backlight for LCD drive. 1.4 TOP MODULE UNIT 1) Operation switch, operation display and finder LED. 1.5 EF FPC 1) Flash control. 1.6 STJ PCB ASS’Y 1) Flash drive and charging circuit for the flash. BUTTON PCB ASS'Y TOP MODULE UNIT LCD PCB ASS'Y MAIN PCB ASS'Y DC/DC CONVERTER PCB ASS'Y Fig. 1 2-1 FLASH UNIT CHAPTER 2. TECHNICAL DESCRIPTION 2. Outline of Circuits 2.1 Power Supply Control The power supply is controlled by the CPU and DSP mounted on the MAIN PCB ASS’Y. 2.1.1 Power Supply Block Diagram DC/DC CONVERTER PCB ASS’Y MAIN PCB ASS’Y E0, E1 CONTROL CPU E2, E3 CONTROL D14 E4 DSP E21 REG DC/DC CONVERTER DC-IN BATTERY CHARGE CONTROL E0 OUTPUT VDD0_3.3 for System with CPU E1 OUTPUT VDD12-1.5 for DSP E2 OUTPUT VDD2_5.5 VDD2_15 VDD2_N7.5 for CCD VDD3_12.3 for CCD VDD3_20 for LCD Backlight VDD4_5.0 for VIDEO Amp VBATF VBAT for Motor Drive REG E3 OUTPUT Q54 REG Q22 Fig. 2 Power System Block Diagram 2.1.2 Power Supply Control Sequence 1) In the case of either "Battery is Installed" or External Power is Supplied to "DC-IN" connector; CPU activates the other main functions. (E0, E1) Operating the Dial Switch Rec. Mode Play Mode 1. Controls CCD (E2) 2. Controls LCD (E3) 3. Controls LCD backlight (E3) 1. Controls LCD (E3) 2. Controls LCD backlight (E3) 2) In case that Dial Switch is in "LOCK" position when "Battery is Installed"; Battery charging operation starts when external power is supplied to "DC-IN" connector. 2-2 CHAPTER 2. TECHNICAL DESCRIPTION 2.2 Signal Processing MAIN PCB ASS'Y SDRAM CF card HD, VD CLK Drive Pulse TG DSP CCD Sensor LENS LCD Driver CDS, A/D Motor Driver Video Amp LCD AV OUT AF Support LED FLASH MEMORY FINDER LED USB CPU RTC MIC Audio Amp MIC Amp SPEAKER BUZZER SW DIAL KEY Electric FLASH Fig. 3 Signal System Block Diagram 2.2.1 System Control The CPU on the MAIN PCB ASS’Y controls the lens (motor, shutter), microphone input, operation switch receiver, USB communication and flowing circuits. • • • • • • • • TG: Creation of the CCD drive pulse CDS, A/D: CCD signal processing and conversion of the digital data LCD Driver: Driving the LCD FLASH MEMORY: Firmware and adjustment data memory DSP: Picture processing RTC: Clock count for watch AF Support LED: AF auxiliary, self-timer and red-eye protection also serves as a lamp Electric Flash: Flash and charging circuit 2-3 CHAPTER 2. TECHNICAL DESCRIPTION 2.2.2 Picture Processing 1) The drive pulse of the CCD sensor is created by both clock from DSP and TG that is operated by sync. signal. The picture signal by the drive pulse is output from CCD sensor. The output signal of the CCD picture is converted to the signal processing and the digital data by the CDS and A/D converter, and is sent to the DSP. 2) The DSP circuit performs the following signal processing. • Processes the picture data (using the SDRAM). • Writes and reads the picture data to and from the CF card. • Outputs the picture data to the CPU. • Outputs analog video signal to the LCD and VIDEO OUT. 3) The video signal that is supplied form the DSP is controlled by the LCD driver and is displayed on the LCD. The video amplifier is activated when the AV jack is inserted to the video jack and drives the video signal in 75 Ω. 2.2.3 Audio Processing (Recording and Playback Functions) 1) During recording of moving picture • Audio signal of microphone is converted to digital data by CPU and is recorded. 2) During playback, it is converted back to analog audio signal by CPU and is output from speaker and AV jack. 2-4 CHAPTER 2. TECHNICAL DESCRIPTION 3. Troubleshooting 3.1 When an Error Code is Displayed [Remedy] • Check for any abnormalities in the mounting of probable faulty parts or connector connections referring to the table below. • Try replacing probable faulty parts referring to the table below. [NOTE] • The error code is displayed on the Display Panel (B/W LCD PANEL). • Adjustments must be performed after the part has been replaced. For details, see “CH.3 3. Adjustments” Error Code E02 Name Occurrence Conditions Cause and Probable Faulty Part AF AF processing did not end within the speci- MAIN PCB ASS’Y TIME OUT fied time. OPTICAL UNIT The focus lens was not driven. MAIN PCB ASS’Y OPTICAL UNIT E03 EF Auto Flash Control did not end within the MAIN PCB ASS’Y TIME OUT specified time. OPTICAL UNIT JPEG DMA JPEG processing did not end within the MAIN PCB ASS’Y TIME OUT specified time. E14 UNKNOWN When an error of unknown cause occurs. UNKNOWN E16 IMAGING Communications between the CPU and pe- MAIN PCB ASS’Y TIME OUT ripheral ICs did not end within the speci- E09 fied time during or after photography in the EVF mode. LENS ZOOM LENS Feeding out of the lens barrel did not end MAIN PCB ASS’Y ERROR within the specified time after the power OPTICAL UNIT was turned ON. Detection of the zoom PI (photo-interrupter) OPTICAL UNIT failed. MAIN PCB ASS’Y The lens barrel is fed out with the lens cap attached → Remedy: Remove the lens cap, and restart the camera. The zoom position error was detected. OPTICAL UNIT MAIN PCB ASS’Y Either zoom movement is obstructed by some external cause, or there was some unintentional camera zoom movement. → Remedy: Restart the camera. 2-5 CHAPTER 2. TECHNICAL DESCRIPTION Error Code E23 Name CF NO SPACE Occurrence Conditions When the CF becomes full during writing Cause and Probable Faulty Part MAIN PCB ASS’Y of photographed images to CF, writing is repeatedly performed with the JPEG compression ratio successively increased to reduce the size of the image file until it can be successfully written to CF. This error occurs when writing of the JPEG image file fails after 10 retries at increasingly higher compression ratios. * The same applies in the case of the Micro Drive. E24 E25 E26 E27 POWER ON The power of the imaging circuit on the MAIN PCB ASS’Y ERROR MAIN PCB ASS’Y was not detected. DC/DC CONVERTER PCB ASS’Y The power of the LCD PCB ASS’Y was not LCD PCB ASS’Y detected. HINGE UNIT FOCUS PI Detection of the focus PI (photo-interrupter) OPTICAL UNIT ERROR failed. MAIN PCB ASS’Y CAPTURE Writing of the photograph image to SDRAM MAIN PCB ASS’Y TIME OUT did not end within the specified time. CF WRITE Free area could not be secured in the buffer CF CARD/MICRO DRIVE TIME OVER for the photograph image within the speci- MAIN PCB ASS’Y fied time in the continuous shooting mode. E30 POWER OFF The camera power was turned OFF while The battery or DC plug was removed while ERROR the image was being recorded to the CF the image was being recorded to the CF Card/Micro Drive (while the green LED was Card/Micro Drive. blinking). (The error code is displayed when → Remedy: Restart the camera. the camera is next turned ON.) * This error may occur after E23. E50 E52 CF FORMAT The CF Card/Micro Drive could not be for- ERROR matted properly. QUICK REVIEW Review of the photograph image failed. ERROR 2-6 CF CARD/MICRO DRIVE MAIN PCB ASS’Y CHAPTER 2. TECHNICAL DESCRIPTION 3.2 When a Problem Occurs [Remedy] • Check for any abnormalities in the mounting of probable faulty parts or connector connections referring to the table below. • Try replacing probable faulty parts referring to the table below. [NOTE] • Adjustments must be performed after the part has been replaced. For details, see “CH.3 3. Adjustments” Problem (when an error code is not displayed) Cause and Probable Faulty Part The camera does not work. DC/DC CONVERTER PCB ASS’Y MAIN PCB ASS’Y MAIN DIAL BRUSH TOP MODULE UNIT BATTERY BOX MAIN UNIT BATTERY EJECT SPRING POWER LEAD The image is not displayed on the LCD Monitor. HINGE UNIT MAIN PCB ASS’Y EF FPC LCD PANEL LCD PCB ASS’Y BACK LIGHT UNIT The image is not reversed even if the LCD Monitor is rotated. HINGE UNIT LCD PCB ASS’Y MAIN PCB ASS’Y The photograph image is abnormal. OPTICAL UNIT MAIN PCB ASS’Y The zoom does not function. OPTICAL UNIT MAIN PCB ASS’Y ZOOM BRUSH TOP MODULE UNIT The Display Panel (B/W LCD) is strange. B/W LCD PANEL CONTACT RUBBER TOP MODULE UNIT MAIN PCB ASS’Y The Built-in Flash does not fire. STJ PCB ASS’Y DC/DC CONVERTER PCB ASS’Y TOP MODULE UNIT 2-7 CHAPTER 2. TECHNICAL DESCRIPTION Problem (when an error code is not displayed) Cause and Probable Faulty Part EF FPC The External Flash does not fire. ACC. SHOE FPC ACC. CONTACT UNIT ACC. SHOE PIN ACC. DETECT PLATE Video output is strange. STJ PCB ASS’Y MAIN PCB ASS’Y Communications with the personal computer is not possible. STJ PCB ASS’Y MAIN PCB ASS’Y The CF card or Micro Drive is not recognized. CF CARD/MICRO DRIVE CF UNIT MAIN PCB ASS’Y Sound cannot be recorded. MIC. UNIT STJ PCB ASS’Y MAIN PCB ASS’Y Shutter sound/Sound is not played back. SPEAKER UNIT DC/DC CONVERTER PCB ASS’Y MAIN PCB ASS’Y Operations from the Wireless Controller are not accepted. HV FPC EF FPC MAIN PCB ASS’Y Buttons do not work. EF FPC TOP MODULE UNIT MAIN PCB ASS’Y The Mode dial does not work. MODE DIAL BRUSH TOP MODULE UNIT MAIN PCB ASS’Y The date setting is not held in memory. BATTERY BOX MAIN UNIT DATE LEAD HV FPC EF FPC MAIN PCB ASS’Y Battery charge error DC/DC CONVERTER PCB ASS’Y 2-8 CHAPTER 3. REPAIR INSTRUCTION CONTENTS 1. Before Starting the Repair Work 1.1 Precaution on Flash High Tension Circuit ------------------------------------------------------------------------------- 3-1 1.2 List of Tools ----------------------------------------------------------------------------------------------------------------- 3-1 1.3 List of Supplies -------------------------------------------------------------------------------------------------------------- 3-1 1.4 Flexible Connectors --------------------------------------------------------------------------------------------------------- 3-2 2. Disassembly/Assembly 2.1 Procedure --------------------------------------------------------------------------------------------------------------------- 3-3 2.2 Removal of Main Parts/Units ---------------------------------------------------------------------------------------------- 3-4 2.2.1 FRONT COVER UNIT ------------------------------------------------------------------------------------------- 3-4 2.2.2 REAR COVER UNIT --------------------------------------------------------------------------------------------- 3-5 2.2.3 BATTERY LID UNIT, DATE BATTERY HOLDER ------------------------------------------------------- 3-6 2.2.4 SIDE COVER, CF COVER -------------------------------------------------------------------------------------- 3-7 2.2.5 TOP COVER ------------------------------------------------------------------------------------------------------- 3-8 2.2.6 SIDE COVER FRAME ------------------------------------------------------------------------------------------- 3-9 2.2.7 MAIN BARREL UNIT, MICROPHONE UNIT -------------------------------------------------------------3-10 2.2.8 MAIN PCB ASS’Y, MAIN SHEET ---------------------------------------------------------------------------3-11 2.2.9 EVF UNIT, SUB FRAME -------------------------------------------------------------------------------------- 3-12 2.2.10 REAR PLATE UNIT, CF UNIT -------------------------------------------------------------------------------3-13 2.2.11 FLASH/JACK UNIT, SPEAKER UNIT ----------------------------------------------------------------------3-14 2.2.12 DC/DC CONVERTER PCB ASS’Y, OPTICAL UNIT/FINDER UNIT -------------------------------- 3-15 2.2.13 OPTICAL UNIT, FINDER UNIT ----------------------------------------------------------------------------- 3-16 2.2.14 Assembling the FINDER UNIT ------------------------------------------------------------------------------- 3-17 2.2.15 BAT BOX UNIT, TRIPOD BASE -----------------------------------------------------------------------------3-18 2.3 Disassembly of Main Units -----------------------------------------------------------------------------------------------3-19 2.3.1 TOP COVER ------------------------------------------------------------------------------------------------------3-19 2.3.1.1 B/W LCD UNIT, TOP BUTTON 1,TOP BUTTON 2,TOP BUTTON 3 -------------------------- 3-19 2.3.1.2 B/W LCD WINDOW -------------------------------------------------------------------------------------3-20 2.3.1.3 MODE DIAL -----------------------------------------------------------------------------------------------3-21 2.3.1.4 ZOOM LEVER UNIT -------------------------------------------------------------------------------------3-22 2.3.1.5 ACCESSORY CONTACT UNIT ---------------------------------------------------------------------- 3-23 2.3.2 EVF UNIT -------------------------------------------------------------------------------------------------------- 3-24 2.3.2.1 LCD TOP COVER, HINGE UNIT ----------------------------------------------------------------------3-24 2.3.2.2 LCD FRAME COVER, LCD PANEL ------------------------------------------------------------------3-25 2.3.2.3 LCD PCB ASS’Y ------------------------------------------------------------------------------------------3-26 2.3.3 REAR PLATE UNIT ---------------------------------------------------------------------------------------------3-27 2.3.3.1 BUTTON PCB ASS’Y, EF SENSOR HOLDER ------------------------------------------------------3-27 2.3.4 CCD HOLDER, SHUTTER UNIT -----------------------------------------------------------------------------3-28 2.3.4.1 CCD HOLDER, SHUTTER UNIT ----------------------------------------------------------------------3-28 2.3.4.2 Assembling the CCD HOLDER, SHUTTER UNIT-1 ------------------------------------------------3-29 2.3.4.3 Assembling the CCD HOLDER, SHUTTER UNIT-2 ------------------------------------------------3-30 2.3.5 BAT BOX UNIT ------------------------------------------------------------------------------------------------- 3-31 2.3.5.1 HV MODULE UNIT, SLT HOLDER, LEAF SW UNIT, R/C HOLDER -------------------------3-31 2.3.5.2 HV MODULE UNIT, LEAF SW UNIT ----------------------------------------------------------------3-32 2.4 Screw List -------------------------------------------------------------------------------------------------------------------3-33 3. Adjustments 3.1 Replacement Parts and Adjustment Items ----------------------------------------------------------------------------- 3-34 3.2 Adjustment Tools ----------------------------------------------------------------------------------------------------------3-35 3.3 Before Starting Electrical Adjustments ---------------------------------------------------------------------------------3-36 3.3.1 TWAIN Driver Installation --------------------------------------------------------------------------------------3-36 3.3.2 Factory Mode Driver Installation -------------------------------------------------------------------------------3-36 3.3.3 Adjustment Software Installation -------------------------------------------------------------------------------3-38 3.3.4 Preparation -------------------------------------------------------------------------------------------------------- 3-39 3.3.5 Starting up the Adjustment Software ---------------------------------------------------------------------------3-40 3.3.6 Menu Window -----------------------------------------------------------------------------------------------------3-40 3.3.7 How to Use the Adjustment Software -------------------------------------------------------------------------3-40 3.4 Calibration ----------------------------------------------------------------------------------------------------------------- 3-41 3.4.1 Calibration -------------------------------------------------------------------------------------------------------- 3-41 3.5 Adjustment Procedure -----------------------------------------------------------------------------------------------------3-46 3.5.1 CCD Adjustment ------------------------------------------------------------------------------------------------- 3-46 3.5.2 Optical Unit Adjustment ---------------------------------------------------------------------------------------- 3-48 3.5.3 Imaging Process Adjustment ------------------------------------------------------------------------------------3-50 3.5.4 Color Adjustment -------------------------------------------------------------------------------------------------3-53 3.5.5 Pixel Dot Adjustment --------------------------------------------------------------------------------------------3-55 3.5.6 LCD Adjustment ------------------------------------------------------------------------------------------------- 3-57 3.5.7 Flash Adjustment -------------------------------------------------------------------------------------------------3-58 3.5.8 Checking of sound recording/output ---------------------------------------------------------------------------3-60 CHAPTER 3. REPAIR INSTRUCTION 1. Before Starting the Repair Work Be sure to read the following precaution before starting the repair work. 1.1 Precaution on Flash High Tension Circuit • • When the FRONT COVER UNIT is removed, be sure to discharge the main capacitor. (Discharging resistor: 1 kΩ, approx. 5 W.) First contact the GND terminal of the main capacitor with the discharging resistor. Then contact the positive terminal of the main capacitor. CAUTION: Be careful of electric shock because the circuit is the high tension circuit. FLASH/JACK UNIT + terminal – terminal Fig. 3-1 Precaution on flash high tension circuit 1.2 List of Tools The following tools are used for the re-assembling during service. (1) List of tools New Name of tools Screwdriver (Local Purchase) Tweezers (Local Purchase) Soldering iron (Local Purchase) Part No. Remarks 1.3 List of Supplies The following supplies are used for the re-assembling during service. (1) List of supplies New Name of supplies ADHESIVE TAPE, SONY T4000 DIA BOND No.1663G INSULATION TAPE 3M No.56 LOGENEST RAMBDA A-74 Part No. CY4-6012-000 CY9-8129-000 CY4-6018-000 CY9-8102-000 THREE BOND 1401C Solder (Local Purchase) CY9-8011-000 3-1 Remarks Fixing the flexible cable Attaching the parts together Used for SIDE COVER FRAME Used when exchanging MODE DIAL, ZOOM LEVER UNIT ACC. SHOE CHAPTER 3. REPAIR INSTRUCTION 1.4 Flexible Connectors This product uses the five types of the flexible connectors. 1 Type A Unconnected state Connected state Unconnected state Connected state 2 Type B 3 Type C LOCK The contact-piece UNLOCK should face downwards Unlocked state Locked state 4 Type D UNLOCK LOCK The contact-piece should face downwards Unlocked state Locked state UNLOCK LOCK 5 Type E The contact-piece should face upwards Unlocked state Locked state Fig. 3-2 Flexible connectors CAUTIONS: 1. For the connectors of Type C, Type D and Type E, set them to the unlocked state before removing and inserting flexible card. After flexible card is inserted, set them to the locked state. 2. The flexible card is equipped with the holes as shown. Use them for removal and insertion by inserting the tweezers into them as required. 3-2 Holes Fig. 3-3 Holes for removal CHAPTER 3. REPAIR INSTRUCTION 2. Disassembly/Assembly 2.1 Procedure Disassembling procedure of PowerShot G5 is shown by the following flowchart. Reverse the disassembling procedure to reassemble them. ∗ The pages to refer are shown in parenthesis ( ). FRONT COVER UNIT (3-4) REAR COVER UNIT (3-5) BATTERY LID UNIT, DATE BATTERY HOLDER (3-6) SIDE COVER, CF COVER (3-7) TOP COVER (3-8) SIDE COVER FRAME MAIN BARREL UNIT, MICROPHONE UNIT CAUTION B/W LCD UNIT, TOP BUTTON1,TOP BUTTON2, (3-19) TOP BUTTON3 B/W LCD WINDOW (3-20) MODE DIAL (3-21) ZOOM LEVER UNIT (3-22) (3-9) (3-10) ACCESSORY CONTACT UNIT (3-23) Be careful high tension MAIN PCB ASS'Y, MAIN SHEET (3-11) LCD TOP COVER , HINGE UNIT (3-24) EVF UNIT, SUB FRAME (3-12) LCD FRAME COVER, LCD PANEL (3-25) LCD PCB ASS'Y (3-26) BUTTON PCB ASS'Y, EF SENSOR HOLDER (3-27) CCD HOLDER UNIT, SHUTTER UNIT (3-28) Assembling the CCD HOLDER UNIT, SHUTTER UNIT-1 (3-29) (3-30) (3-17) Assembling the CCD HOLDER UNIT, SHUTTER UNIT-2 (3-18) HV MODULE UNIT, SLT HOLDER, (3-31) LEAF SW UNIT, R/C HOLDER REAR PLATE UNIT, CF UNIT FLASH/JACK UNIT, SPEAKER UNIT (3-13) (3-14) DC/DC CONVERTER PCB ASS'Y (3-15) OPTICAL UNIT/FINDER UNIT OPTICAL UNIT, FINDER UNIT (3-16) Assembling the FINDER UNIT BAT BOX UNIT, TRIPOD BASE HV MODULE UNIT, LEAF SW UNIT 3-3 (3-32) CHAPTER 3. REPAIR INSTRUCTION 2.2 Removal of Main Parts/Units (1)-6 Alignment position (1)-6 Button FRONT COVER UNIT h (1)-3 (1)-6 g (1)-2 (1)-5 d (1)-7 (1)-4 FRONT COVER UNIT e h g d CD1-5033-000 CD1-5032-000 CD1-5028-000 e (1)-1 CD1-5030-000 FRONT CAP UNIT BLACK M1.7 BLACK M1.7 (SELF TAP) 3.0mm 4.0mm 5.5mm 4.0mm BLACK M1.7 (SELF TAP) BLACK M1.7 Fig. 3-4 FRONT COVER UNIT 2.2.1 FRONT COVER UNIT (1) FRONT COVER UNIT 1. While pushing the button, rotate the FRONT CAP UNIT to the alignment position, and remove the FRONT CAP UNIT. 2. Remove the screw of g. 3. Remove the screw of h. 4. Remove the two screws of e. 5. Remove the screw of d. 6. Turn over the FRONT COVER UNIT in the direction of the arrow and remove the flexible cable. 7. Remove the FRONT COVER UNIT. 3-4 CHAPTER 3. REPAIR INSTRUCTION (1)-2 CAUTION f Be careful not to drop the SELECTOR SPRING. EVF UNIT (1)-4 (1)-5 CF COVER (1)-1 (1)-6 SELECTOR e (1)-3 SPRING REAR COVER UNIT e f CD1-5030-000 CD1-5031-000 4.5mm 4.0mm LCD BUSH BLACK M1.7 (1)-1 e BLACK M1.7 NOTE (Assembling) When installing the main body and the REAR COVER UNIT do as follows. Install them after each diopter adjustment dial of the FINDER UNIT and the REAR COVER UNIT are aligned to the angles specified as shown in the illustration. REAR COVER UNIT . FINDER UNIT A Diopter adjustment dial Rotate the diopter adjustment dial in the direction of mark A as far as it can go. When it reaches the deep end, return it slightly. Rotate the diopter adjustment dial as far as it can go. Fig. 3-5 REAR COVER UNIT 2.2.2 REAR COVER UNIT (1) REAR COVER UNIT 1. Remove the three screws of e. 2. Remove the screw of f. 3. Open the CF COVER. 4. Open the EVF UNIT. 5. Remove the REAR COVER UNIT from the main body. 6. Remove the SELECTOR SPRING from REAR COVER UNIT. CAUTION Be careful not to drop the SELECTOR SPRING. NOTE (Assembling) When installing the main body and the REAR COVER UNIT do as follows. Install them after each diopter adjustment dial of the FINDER UNIT and the REAR COVER UNIT are aligned to the angles specified as shown in the illustration. 3-5 CHAPTER 3. REPAIR INSTRUCTION BATTERY LID UNIT BATTERY LID UNIT Spring of the BATTERY LID UNIT (1)-3 (1)-5 SHAFT (1)-3 (1)-4 DATE BATTERY HOLDER (2)-2 CAUTION Be careful of the + and polarities of the DATE BATTERY. DATE BATTERY (2)-1 (1)-2 BATTERY SHAFT HOLDER q XA4-9170-359 3.5mm (1)-1 BLACK M1.7 (SELF TAP) q Fig. 3-6 BATTERY LID UNIT, DATE BATTERY HOLDER 2.2.3 BATTERY LID UNIT, DATE BATTERY HOLDER (1) BATTERY LID UNIT 1. Remove the screw of q. 2. Remove the BATTERY SHAFT HOLDER. 3. Release the lock by sliding the BATTERY LID HOLDER, and open it. 4. Push out the shaft of the BATTERY LID UNIT with the thin flat-head screwdriver. 5. While taking care of the spring of the BATTERY LID UNIT not to be bent, remove the BATTERY LID UNIT by twisting in the direction of the arrow. (2) DATE BATTERY HOLDER 1. Pull out the DATE BATTERY HOLDER. 2. Remove the DATE BATTERY from the DATE BATTERY HOLDER. CAUTION Be careful of the + and - polarities of the DATE BATTERY. 3-6 CHAPTER 3. REPAIR INSTRUCTION NOTE2 (Assembling) While being careful not to ooze the Logenest Rambda A-74, coat it as shown in the figure. CF COVER o (2)-3 NOTE1 (Assembling) (1)-3 JACK COVER SHAFT does not overflow from the hole for inserting it. (2)-3 (2)-1 (2)-2 (1)-2 CF CLIPPING2 SPRING JACK COVER SHAFT (1)-3 (1)-1 SIDE COVER f Claws JACK COVER (1)-4 JACK COVER SHAFT f o CD1-5031-000 XA4-5170-307 4.5mm 3.0mm (1)-3 BLACK M1.7 METAL M1.7 (SELF TAP) Fig. 3-7 SIDE COVER, CF COVER 2.2.4 SIDE COVER, CF COVER (1) SIDE COVER 1. Remove the screw of f. 2. Remove the SIDE COVER. 3. Push out the JACK COVER SHAFT with the thin stick like tweezers, and pull out the JACK COVER SHAFT. 4. Remove the two claws and remove the JACK COVER. NOTE1 (Assembling) JACK COVER SHAFT is not overflow from the hole for inserting it (a dashed line). (2) CF COVER 1. Remove the screw of o. 2. Remove the CF CLIPPING2 SPRING. 3. Remove the CF COVER in the direction of arrow. NOTE2 (Assembling) While being careful not to ooze the Logenest Rambda A-74, coat it as shown in the figure. 3-7 CHAPTER 3. REPAIR INSTRUCTION (1)-4 m (1)-2 STRAP RIGHT BASE (1)-1n r (1)-3 Dowel (1)-5 (1)-8 (1)-7 TOP COVER m n r XA1-7170-307 XA1-7170-357 XA4-9170-407 3.0mm (1)-6 METAL M1.7 3.5mm METAL M1.7 4.0mm METAL M1.7 (SELF TAP) Fig. 3-8 TOP COVER 2.2.5 TOP COVER (1) TOP COVER 1. Remove the screw of n. 2. Remove the STRAP RIGHT BASE. 3. Remove the two screws of r. 4. Remove the two screws of m. 5. Open the EVF UNIT. 6. Disconnect the connector of the B/W LCD UNIT. 7. Remove the dowel and turn over the TOP COVER in the direction of arrow. 8. Remove the flexible board from the TOP COVER UNIT, and remove the TOP COVER from the main body. 3-8 CHAPTER 3. REPAIR INSTRUCTION NOTE (Assembling) (1)-4 Insulation tape SIDE COVER FRAME (1)-1 Dowels q (1)-3 (1)-4 Insulation tape q b XA4-9170-359 CD1-3108-000 b SIDE COVER FRAME BLACK M1.7 (SELF TAP) Fig. 3-9 SIDE COVER FRAME 2.2.6 SIDE COVER FRAME (1) SIDE COVER FRAME 1. Remove the screw of q. 2. Remove the screw of b. 3. Remove the two dowels and remove the SIDE COVER FRAME. 4. Peel off the Insulation tape. NOTE (Assembling) Attach the Insulation tape as shown in the illustration. 3-9 2.0mm 3.5mm (1)-2 METAL M1.7 CHAPTER 3. REPAIR INSTRUCTION CAUTION Never touch the terminals of the capacitor ! Be sure to discharge the capacitor with the discharging resistor (about 1kΩ/5W) ! + terminal – terminal (1)-3 (1)-5 m (1)-2 MAIN BARREL UNIT Cable of the BAT BOX UNIT q (1)-4 (1)-1 (2)-1 m (1)-3 MICROPHONE HOLDER NOTE (Assembling) (1)-5 (2)-2 MICROPHONE UNIT MAIN BARREL UNIT B m q XA1-7170-307 XA4-9170-359 3.5mm 3.0mm A Cable of the BAT BOX UNIT METAL M1.7 BLACK M1.7 (SELF TAP) Fig. 3-10 MAIN BARREL UNIT, MICROPHONE UNIT 2.2.7 MAIN BARREL UNIT, MICROPHONE UNIT (1) MAIN BARREL UNIT 1. Remove the cable of the MICROPHONE UNIT. 2. Remove the cable of the BAT BOX UNIT from the groove of the MAIN BARREL UNIT. 3. Remove the two screws of m. 4. Remove the screw of q. 5. Remove the MAIN BARREL UNIT. CAUTION Remove it with utmost care not to touch the terminal of the capacitor. NOTE (Assembling) When installing the MAIN BARREL UNIT, route the cable underneath the MAIN BARREL UNIT at A , and hook on the groove of the MAIN BARREL UNIT at B . (2) MICROPHONE UNIT 1. Remove the cable of the MICROPHONE HOLDER and the MICROPHONE UNIT from the MAIN BARREL UNIT. 2. Remove the cable of the MICROPHONE UNIT from the MICROPHONE HOLDER. 3-10 CHAPTER 3. REPAIR INSTRUCTION NOTE2 (Assembling) (1)-6 NOTE1 (Assembling) (1)-5 SUB FRAME 4pin yellow white blue 8pin blue 8pin white yellow MAIN PCB ASS'Y MAIN PCB ASS'Y (1)-1 (1)-2 (1)-5 (1)-4 (1)-5 (1)-5 (1)-2 (1)-2 (1)-2 (1)-6 j (1)-2 (1)-3 NOTE3 (Assembling) (2)-2 Dowel for setting the position MAIN PCB ASS'Y (1)-2 MAIN SHEET j m m XA1-7170-307 CD1-4987-000 (2)-1 MAIN SHEET 3.0mm 3.0mm (2)-2 METAL M1.7 SILVER M1.7 Fig. 3-11 MAIN PCB ASS’Y, MAIN SHEET 2.2.8 MAIN PCB ASS’Y, MAIN SHEET (1) MAIN PCB ASS’Y 1. Open the EVF UNIT in the direction of the arrow. 2. Remove the connector of the CF UNIT, the three flexible boards of the OPTICAL UNIT, the flexible board of the BUTTON PCB ASS’Y and the MAIN/FLASH FPC. 3. Remove the two screws of j. 4. Disconnect the connector of the DC/DC CONVERTER PCB ASS’Y. 5. Remove the three cables from the EVF UNIT. 6. Remove the MAIN PCB ASS’Y. NOTE1 (Assembling) Insert the two 8-pin cables from the EVF UNIT into the connector of the MAIN PCB ASS’Y as shown in the illustration. NOTE2 (Assembling) Push cables coming from the EVF UNIT into the space between the SUB FRAME, and the MAIN PCB ASS’Y. (2) MAIN SHEET 1. Remove the screw of m. 2. Remove the MAIN SHEET. NOTE3 (Assembling) When installing the MAIN SHEET, align the MAIN SHEET with the dowel used for position setting. 3-11 CHAPTER 3. REPAIR INSTRUCTION Dowels SUB FRAME (2)-1 c (2)-2 EVF UNIT (1)-5 (1)-1 (2)-1 c (1)-3 c (1)-4 Claws i (1)-2 NOTE (Assembling) (1)-3 HINGE COVER c i CD1-3798-000 CD1-4983-000 1.6mm 3.0mm METAL M1.7 SILVER M1.7 Fig. 3-12 EVF UNIT. SUB FRAME 2.2.9 EVF UNIT, SUB FRAME (1) EVF UNIT 1. Rotate the EVF UNIT by the 90 degrees in the direction of the arrow. 2. Remove the two screws of i. 3. Remove the two claws and remove the HINGE COVER. 4. Remove the two screws of c. 5. Remove the EVF UNIT. NOTE (Assembling) When installing HINGE COVER, take out the two 8-pin cables from the space between the HINGE COVER and HINGE UNIT as shown in the illustration. (2) SUB FRAME 1. Remove the two screws of c. 2. Remove the two dowels and remove the SUB FRAME. 3-12 CHAPTER 3. REPAIR INSTRUCTION EF SENSOR of the (1)-5 REAR PLATE UNIT Dowels (1)-1 (1)-2 q (1)-2 q k Dowels (1)-3 (2)-3 (1)-6 REAR PLATE UNIT q (2)-1 q (1)-2 m k CF UNIT (2)-2 (1)-4 k m q XA1-7170-147 XA1-7170-307 XA4-9170-359 1.4mm METAL M1.7 3.0mm METAL M1.7 3.5mm BLACK M1.7 (SELF TAP) Fig. 3-13 REAR PLATE UNIT, CF UNIT 2.2.10 REAR PLATE UNIT, CF UNIT (1) REAR PLATE UNIT 1. Remove the flexible board of the HV MODULE UNIT. 2. Remove the three screws of q. 3. Remove the two screws of k. 4. Remove the screw of m. 5. Remove the two dowels and pull out the EF sensor of the REAR PLATE UNIT. 6. Remove the three dowels and remove the REAR PLATE UNIT in the direction of the the arrow. (2) CF UNIT 1. Remove the screw of q. 2. Remove the two screws of k. 3. Remove the CF UNIT. 3-13 CHAPTER 3. REPAIR INSTRUCTION NOTE1 (Assembling) (1)-2 (1)-2 FLASH/JACK UNIT Red DC/DC CONVERTER PCB ASS’Y White (1)-2 a (1)-2 FLASH/JACK UNIT Dowels (1)-1 MAIN/FLASH FPC (1)-3 CAUTION Be careful not to drop the SPEAKER BUSH. (1)-6 SPEAKER UNIT (2)-2 (2)-1 SPEAKER BUSH NOTE3 (Assembling) (2)-2 (1)-4 (1)-5 q NOTE2 (Assembling) (2)-2 Double-sided adhesive tape a q CB1-1998-000 XA4-9170-359 3.0mm METAL M1.7 3.5mm BLACK M1.7 (SELF TAP) Fig. 3-14 FLASH/JACK UNIT, SPEAKER UNIT 2.2.11 FLASH/JACK UNIT, SPEAKER UNIT (1) FLASH/JACK UNIT 1. Remove the MAIN/FLASH FPC. 2. Remove the cable of the BAT BOX UNIT and two cables of the FLASH/JACK UNIT. 3. Remove the three screws of a. 4. Remove the cable of the SPEAKER UNIT. 5. Remove the two screws of q. 6. Remove the two dowels and raise FLASH/JACK UNIT. Then push out the FLASH/JACK UNIT to the front and remove the FLASH/JACK UNIT. NOTE1 (Assembling) Insert the cable coming from the BAT BOX UNIT to the red connector. Insert the cable coming from the FLASH/JACK UNIT to the white connector. (2) SPEAKER UNIT 1. Remove the SPEAKER BUSH. 2. Remove the SPEAKER UNIT from the FLASH/JACK UNIT. CAUTION Be careful not to drop the SPEAKER BUSH. NOTE2 (Assembling) Attach the double-sided adhesive tape at the position as shown in the illustration and install the SPEAKER UNIT. NOTE3 (Assembling) Route the cable of the SPEAKER UNIT as shown in the illustration. 3-14 CHAPTER 3. REPAIR INSTRUCTION NOTE1 (Assembling) NOTE2 (Assembling) (2)-5 Install the CCD SPRING as shown in the illustration. MAIN FRAME CCD SPRING CAUTION Be careful not to drop the CCD SPRING. (2)-2 ZOOM GND PLATE Setting the position for reassembling (2)-1 q CCD SPRING (2)-2 ZOOM GND PLATE (2)-5 q (2)-3 (2)-4 OPTICAL UNIT/ FINDER UNIT (1)-2 DC/DC CONVERTER PCB ASS'Y a q CB1-1998-000 XA4-9170-359 3.0mm a (1)-1 METAL M1.7 3.5mm BLACK M1.7 (SELF TAP) Fig. 3-15 DC/DC CONVERTER PCB ASS’Y, OPTICAL UNIT/FINDER UNIT 2.2.12 DC/DC CONVERTER PCB ASS’Y, OPTICAL UNIT/FINDER UNIT (1) DC/DC CONVERTER PCB ASS’Y 1. Remove the three screws of a. 2. Slant the DC/DC CONVERTER PCB ASS’Y in the direction of the arrow, and remove it. (2) OPTICAL UNIT/FINDER UNIT 1. Remove the screw of q. 2. Remove the ZOOM GND PLATE. 3. Remove the two screws of q. 4. Remove the OPTICAL UNIT/FINDER UNIT to the direction of the arrow. 5. Remove the CCD SPRING from the OPTICAL UNIT/FINDER UNIT. CAUTION Be careful not to drop the CCD SPRING. NOTE1 (Assembling) When installing the ZOOM GND PLATE, align it with the mark used for position setting of the MAIN FRAME. NOTE2 (Assembling) Insert the CCD SPRING in the OPTICAL UNIT/FINDER UNIT, and hold it down with the MAIN FRAME. 3-15 CHAPTER 3. REPAIR INSTRUCTION (1)-5 Flat-head screwdriver (1)-4 LED HOLDER (1)-6 (1)-6 q (1)-6 FINDER UNIT (1)-1 (1)-2 NOTE (Assembling) LED HOLDER Dowel Coat it with the Dia bond 1663G (1)-3 Claw (1)-7 LED HOLDER q XA4-9170-359 3.5mm (1)-6 OPTICAL UNIT BLACK M1.7 (SELF TAP) Fig. 3-16 OPTICAL UNIT, FINDER UNIT 2.2.13 OPTICAL UNIT, FINDER UNIT (1) OPTICAL UNIT, FINDER UNIT 1. Remove the two screws of q. 2. Slant the FINDER UNIT in the direction of the arrow, and remove the dowel. 3. Remove the claw on the opposite side. 4. Turn over the FINDER UNIT in the direction of the arrow. 5. Push out the LED HOLDER with the use of flat-head screwdriver. 6. Turn over the FINDER UNIT again, pull out the LED HOLDER and remove the FINDER UNIT from the OPTICAL UNIT. 7. Peel off the portion fixed by the Dia bond, and remove the LED HOLDER from the flexible board. NOTE (Assembling) Align the two dowels of the LED HOLDER with the position setting hole of the flexible board and coat it with the Dia bond 1663G as shown in the figure. 3-16 CHAPTER 3. REPAIR INSTRUCTION (1)-2 Hole A Rotate the gear in the direction of mark A as far as it can go. When it reaches its end, return it slightly so that cutouts are aligned with the two holes of the gear. Cutout q FINDER UNIT LED HOLDER (1)-6 (1)-5 (1)-3 Dowel (1)-4 Claw B OPTICAL UNIT/ LED HOLDER q XA4-9170-359 3.5mm C (1)-1 NOTE (Assembling) (1)-1 BLACK M1.7 (SELF TAP) Fig. 3-17 Assembling the FINDER UNIT 2.2.14 Assembling the FINDER UNIT (1) FINDER UNIT 1. Set the OPTICAL UNIT in the retracted position. 2. Rotated the gear in the direction of mark A as far as it can go. When it reaches its end, return it slightly so that cutouts are aligned with the two holes of the gear. 3. Insert the LED HOLDER to the FINDER UNIT. 4. Install the claw. 5. Install the dowel in the opposite side. 6. Install the two screws of q. NOTE (Assembling) If the OPTICAL UNIT is not set in the retracted position, remove the CCD HOLDER UNIT (refer to page 3-28) and rotate the portion B of the OPTICAL UNIT in the direction of mark C with hands until the OPTICAL UNIT is set in the retracted position. 3-17 CHAPTER 3. REPAIR INSTRUCTION m (1)-2 (2)-2 TRIPOD BASE (1)-3 (1)-2 MAIN FRAME m BAT BOX UNIT (1)-1 q (2)-1 m m q XA1-7170-307 XA4-9170-359 3.0mm METAL M1.7 Fig. 3-18 BAT BOX UNIT, TRIPOD BASE 2.2.15 BAT BOX UNIT, TRIPOD BASE (1) BAT BOX UNIT 1. Remove the screw of q. 2. Remove the two screws of m. 3. Remove the BAT BOX UNIT. (2) TRIPOD BASE 1. Remove the two screws of m. 2. Remove the TRIPOD BASE from the MAIN FRAME. 3-18 3.5mm BLACK M1.7 (SELF TAP) CHAPTER 3. REPAIR INSTRUCTION 2.3 Disassembly of Main Units q (1)-3 NOTE (Assembling) l B/W LCD UNIT A (1)-1 B/W LCD UNIT ACC FPC p (1)-2 (1)-4 (2)-3 TOP BUTTON 2 (2)-1 claw TOP BUTTON 1 (2)-2 TOP BUTTON 3 (1)-5 STRAP BASE LEFT CAUTION Be careful not to drop the STRAP BASE LEFT. p l XA1-7170-167 XA4-5170-409 XA4-9170-359 1.6mm Dowels for setting the position METAL M1.7 NOTE (Assembling) q BLACK M1.7 (SELF TAP) 4.0mm 3.5mm BLACK M1.7 (SELF TAP) Fig. 3-19 B/W LCD UNIT, TOP BUTTON 1, TOP BUTTON 2, TOP BUTTON 3 2.3.1 TOP COVER 2.3.1.1 B/W LCD UNIT, TOP BUTTON 1, TOP BUTTON 2, TOP BUTTON 3 (1) B/W LCD UNIT 1. Remove the two screws of l. 2. Remove the two screws of p. 3. Remove the screw of q. 4. Remove the claw and remove the B/W LCD UNIT. 5. Remove the STRAP BASE LEFT. CAUTION Be careful not to drop the STRAP BASE LEFT. NOTE (Assembling) Be careful that the ACC FPC must not be positioned under the portion A of the B/W LCD UNIT. (2) TOP BUTTON 1,TOP BUTTON 2, TOP BUTTON 3 1. Remove the TOP BUTTON1. 2. Remove the TOP BUTTON3. 3. Remove the TOP BUTTON2. 3-19 CHAPTER 3. REPAIR INSTRUCTION (1)-1 DUST COVER SEAL NOTE (Assembling) (1)-2 B/W LCD WINDOW Fig. 3-20 B/W LCD WINDOW 2.3.1.2 B/W LCD WINDOW (1) B/W LCD WINDOW 1. Peel off the DUST COVER SEAL. 2. Remove the B/W LCD WINDOW. NOTE (Assembling) Install the DUST COVER SEAL as shown in the illustration. 3-20 CHAPTER 3. REPAIR INSTRUCTION NOTE1 (Assembling) (1)-1, (1)-3 (1)-1 MODE DIAL CAP MODE DIAL CAP (1)-3 Coat it with the Dia bond 1663G. CAUTION Be careful not to drop the MODE DIAL BALL and the MODE DIAL SPRING MODE DIAL MODE DIAL (1)-4 MODE DIAL BALL (1)-5 MODE DIAL SPRING Coat the sliding surface with Logenest Rambda A-74. NOTE3 (Assembling) ZOOM LEVER (1)-4, (1)-5 UNIT TOP COVER UNIT (1)-3 MODE DIAL BASE UNIT (1)-2 q NOTE2 (Assembling) (1)-3 q Projected part Receptacle hole XA4-9170-359 3.5mm MODE DIAL MODE DIAL BASE UNIT BLACK M1.7 (SELF TAP) Fig. 3-21 MODE DIAL 2.3.1.3 MODE DIAL (1) MODE DIAL 1. Peel off the MODE DIAL CAP from the MODE DIAL. 2. Remove the screw of q. 3. Remove the MODE DIAL BASE UNIT, then remove the MODE DIAL from the TOP COVER UNIT. 4. Remove the MODE DIAL BALL. 5. Remove the MODE DIAL SPRING. CAUTION Be careful not to drop the MODE DIAL BALL and the MODE DIAL SPRING. NOTE1 (Assembling) Attach the MODE DIAL and the MODE DIAL CAP with Dia bond, and coat the sliding surface of the MODE DIAL with Logenest Rambda A-74. NOTE2 (Assembling) Align the large hole and small hole of the receptacle with the large projection and small projection of the projected part, and install the MODE DIAL. NOTE3 (Assembling) Insert the MODE DIAL SPRING into the hole at the side of the ZOOM LEVER UNIT, and place the MODE DIAL BALL on top of it as shown in the illustration. 3-21 CHAPTER 3. REPAIR INSTRUCTION CAUTION Be careful not to drop the ZOOM SPRING. (1)-3 ZOOM BRUSH b (1)-5 (1)-2 ZOOM SPRING NOTE (Assembling) (1)-1 INNER COVER Sliding surface Claw of the INNER COVER Setting the position for reassembling (1)-4 ZOOM LEVER UNIT b CD1-3108-000 2.0mm METAL M1.7 Fig. 3-22 ZOOM LEVER UNIT 2.3.1.4 ZOOM LEVER UNIT (1) ZOOM LEVER UNIT 1. Remove the ZOOM SPRING from the claw of the INNER COVER. 2. Remove the two screws of b. 3. Remove the ZOOM BRUSH and the ZOOM SPRING from the INNER COVER. 4. Remove the ZOOM LEVER UNIT. 5. Remove the ZOOM SPRING from the ZOOM BRUSH. CAUTION Be careful not to drop the ZOOM SPRING. NOTE (Assembling) Coat the sliding surface of the ZOOM BRUSH and INNER COVER with Logenest Rambda A-74 as shown in the illustration. 3-22 CHAPTER 3. REPAIR INSTRUCTION NOTE1 (Assembling) NOTE2 (Assembling) Coat it with the Dia bond 1663G. (1)-1 ACC. SHOE SPRING T After tightening the screw, coat the Three bond 1401C. (1)-2 (1)-1 (1)-3 ACC. SHOE (1)-3 CAUTION Be careful not to damage the parts! (1)-4 ACCESSORY CONTACT UNIT (1)-4 Soldering T XA1-3170-407 4.0mm METAL M1.7 Fig. 3-23 ACCESSORY CONTACT UNIT 2.3.1.5 ACCESSORY CONTACT UNIT (1) ACC. SHOE, ACC. SHOE SPRING 1. Insert a pair of tweezers under the ACC. SHOE SPRING and remove it. CAUTION Be careful not to damage the parts! NOTE1 (Assembling) Coat the Dia bond 1663G as shown in the figure. 2. Remove the four screws of T. 3. Remove the ACC. SHOE. NOTE2 (Assembling) Coat the Three bond 1401C as shown in the figure. 4. Remove the five solderings and remove the ACCESSORY CONTACT UNIT. 3-23 CHAPTER 3. REPAIR INSTRUCTION LCD PCB ASS’Y Blue White Blue (2)-2 (2)-3 (1)-1 (1)-2 d (2)-2 (2)-1 Yellow m HINGE UNIT LCD TOP COVER d (1)-1 d m CD1-5028-000 XA1-7170-307 3.0mm 3.0mm BLACK M1.7 Fig. 3-24 LCD TOP COVER, HINGE UNIT 2.3.2 EVF UNIT 2.3.2.1 LCD TOP COVER, HINGE UNIT (1) LCD TOP COVER 1. Remove the four screws of d. 2. Remove the LCD TOP COVER. (2) HINGE UNIT 1. Remove the screw of m. 2. Remove the cable of the HINGE UNIT (Two places). 3. Remove the HINGE UNIT. 3-24 METAL M1.7 CHAPTER 3. REPAIR INSTRUCTION q (1)-1 NUT PLATE LCD PANEL NOTE (Assembling) In the case of the repair service part, it is supplied with the protection sheet. Remove the protection sheet before use. (1)-2 (2)-1 Dowels (2)-2 (1)-3 BACK LIGHT UNIT Dowels q LCD FRAME COVER XA4-9170-359 BASE PIN 3.5mm BLACK M1.7 (SELF TAP) Fig. 3-25 LCD FRAME COVER, LCD PANEL 2.3.2.2 LCD FRAME COVER, LCD PANEL (1) LCD FRAME COVER 1. Remove the two screws of q. 2. Remove the NUT PLATE. 3. Remove the LCD FRAME COVER from the LCD PANEL. (2) LCD PANEL 1. Remove the flexible board of the LCD PANEL. 2. Remove the four dowels, then remove the LCD PANEL. NOTE (Assembling) In the case of the repair service part, it is supplied with the protection sheet. Remove the protection sheet before use. 3-25 CHAPTER 3. REPAIR INSTRUCTION (1)-1 Soldering LCD PCB ASS'Y Label QR code numbers NOTE (Assembling) LCD SHEET (1)-2 BACK LIGHT UNIT (1)-2 Fig. 3-26 LCD PCB ASS’Y 2.3.2.3 LCD PCB ASS’Y (1) LCD PCB ASS’Y 1. Remove the soldering (Four places). 2. Remove the LCD PCB ASS’Y and the LCD SHEET from the BACK LIGHT UNIT. NOTE (Assembling) When LCD PCB ASS’Y is going to replace, take note of the two QR code numbers (10 digit and 8 digit hexadecimal numbers) of the replacement LCD PCB ASS’Y without fail. (* The QR code numbers are important information when making the LCD adjustment.) 3-26 CHAPTER 3. REPAIR INSTRUCTION REAR FRAME Setting the position for reassembling Setting the position for reassembling BUTTON PCB ASS'Y (1)-3 (1)-2 Double-sided adhesive tape SEL BUTTON BASE (1)-1 m NOTE1 (Assembling) (1)-3 Claw Attach the double-sided adhesive tape. NOTE2 (Assembling) (2)-1 EF SENSOR HOLDER Cavity portion EF SENSOR m XA1-7170-307 Attach the double-sided adhesive tape. 3.0mm (2)-1 EF SENSOR HOLDER METAL M1.7 Fig. 3-27 BUTTON PCB ASS’Y, EF SENSOR HOLDER 2.3.3 REAR PLATE UNIT 2.3.3.1 BUTTON PCB ASS’Y, EF SENSOR HOLDER (1) BUTTON PCB ASS’Y 1. Remove the screw of m. 2. Remove the claw, then remove the SEL. BUTTON BASE. 3. While peeling off the double-sided adhesive tape, remove the BUTTON PCB ASS’Y from the REAR FRAME. NOTE1 (Assembling) Attach the two double-sided adhesive tapes on the REAR FRAME as shown in the illustration. (2) EF SENSOR HOLDER 1. While peeling off the double-sided adhesive tape, remove the EF SENSOR HOLDER. NOTE2 (Assembling) When installing the EF SENSOR HOLDER, attach the double-sided adhesive tape first on the EF SENSOR, then align the cavity portion of the EF SENSOR HOLDER with the EF SENSOR of the BUTTON PCB ASS’Y as shown in the illustration. 3-27 CHAPTER 3. REPAIR INSTRUCTION s (1)-1 Dowel Flexible board of the SHUTTER UNIT FPC GUIDE (1)-4 (1)-3 (1)-2 CCD HOLDER UNIT (1)-5 SHUTTER UNIT A SHUTTER UNIT (1)-6 LENS BARREL UNIT s XA4-9170-457 (1)-7 FRONT LENS UNIT 4.5mm METAL M1.7 (SELF TAP) Fig. 3-28 CCD HOLDER,SHUTTER UNIT 2.3.4 CCD HOLDER, SHUTTER UNIT 2.3.4.1 CCD HOLDER, SHUTTER UNIT (1) CCD HOLDER,SHUTTER UNIT 1. Remove the three screws of s. 2. Remove the the CCD HOLDER UNIT. 3. Remove the flexible board of the SHUTTER UNIT from the dowel of the FPC GUIDE . 4. Remove the FPC GUIDE. 5. Pinches the SHUTTER UNIT with fingers at marked by A, and rotate the SHUTTER UNIT as far as it can go in the direction of the arrow. 6. Remove the SHUTTER UNIT. 7. Remove the FRONT LENS UNIT from the LENS BARREL UNIT. 3-28 CHAPTER 3. REPAIR INSTRUCTION FRONT LENS UNIT Flat portion NOTE (Assembling) (1)-1 FRONT LENS UNIT LENS BARREL UNIT Projected Recepted Groove part Projected part Flat portion Projected parts Recepted Groove Flat portions Flat portion (1)-1 Flat portions Recepted Groove Flat portion Recepted Groove Recepted Grooves LENS BARREL UNIT Large projected part Projected parts SHUTTER UNIT Small projected parts Small cutouts Ring C (1)-3 Large recepted groove Small grooves Small recepted grooves Large cutout Large groove A B (1)-2 FRONT LENS UNIT Fig. 3-29 Assembling the CCD HOLDER,SHUTTER UNIT-1 2.3.4.2 Assembling the CCD HOLDER, SHUTTER UNIT-1 (1) Assembling the CCD HOLDER,SHUTTER UNIT-1 1. Place the FRONT LENS UNIT on top of the LENS BARREL UNIT. 2. While pushing the FRONT LENS UNIT in the direction of mark A and rotating it in the direction of mark B as far as it can go. When it reaches the end, return it about 2 degrees so that the three cutouts of the ring C are aligned with the three grooves of the ring at the end. 3. Align the large groove and small groove of the receptacle with the large projection and small projection of the projected part, and insert the SHUTTER UNIT. NOTE (Assembling) When placing the FRONT LENS UNIT on top of the LENS BARREL UNIT, align the three projections of the FRONT LENS UNIT with the three grooves of the LENS BARREL UNIT. And at the same align the two flat portions of the FRONT LENS UNIT with the two flat portions of the LENS BARREL UNIT. 3-29 CHAPTER 3. REPAIR INSTRUCTION (1)-1 SHUTTER UNIT LENS BARREL UNIT A B B FRONT LENS UNIT (1)-2 NOTE1 (Assembling) (1)-1 CCD HOLDER UNIT NOTE2 (Assembling) (1)-5 Large projected part (1)-3 FPC GUIDE Flexible board of the SHUTTER UNIT Dowel Small projected part Dowel (1)-5 (1)-4 Small recepted groove s XA4-9170-457 4.5mm Large recepted groove FPC GUIDE (1)-6 METAL M1.7 (SELF TAP) s Fig.3-30 Assembling the CCD HOLDER,SHUTTER UNIT-2 2.3.4.3 Assembling the CCD HOLDER, SHUTTER UNIT-2 (1) Assembling the CCD HOLDER,SHUTTER UNIT-2 1. Hold the portion A and rotate it in the direction of the arrow as far as it can go. 2. Rotate the portion B of the LENS BARREL UNIT in the direction of the arrow as far as it can go. 3. Install the FPC GUIDE. 4. Align the SHUTTER UNIT with the dowel used for position setting. 5. Align the large hole and small hole of the receptacle with the large projection and small projection of the projected part, and insert the CCD HOLDER UNIT. 6. Install the three screws of s. NOTE1 (Assembling) When the SHUTTER UNIT is rotated, the portion B of the LENS BARREL UNIT will project. Do not care about the projection and keep rotating it. When it is rotated as far as it can go, the FRONT LENS UNIT enters into the portion B of the LENS BARREL UNIT. NOTE2 (Assembling) When installing, use the original CCD HOLDER UNIT that has been removed from the original OPTICAL UNIT. 3-30 CHAPTER 3. REPAIR INSTRUCTION NOTE1 (Assembling) (1)-7 BAT BOX SUB UNIT (1)-2 CF CLIPPING1 SPRING q (1)-6 Insert the two places of the flexible board into the grooves. (1)-1 (2)-2 o R/C HOLDER (1)-7 (1)-4 LEAF SW COVER Dowels (1)-5 (2)-1 NOTE2 (Assembling) q (2)-2 (1)-3 q R/C HOLDER (1)-6 HV MODULE UNIT, SLT HOLDER, LEAF SW UNIT q o q XA4-5170-307 XA4-9170-359 3.0mm METAL M1.7 (SELF TAP) 3.5mm BLACK M1.7 (SELF TAP) Fig. 3-31 HV MODULE UNIT, SLT HOLDER, LEAF SW UNIT, R/C HOLDER 2.3.5 BAT BOX UNIT 2.3.5.1 HV MODULE UNIT, SLT HOLDER, LEAF SW UNIT, R/C HOLDER (1) HV MODULE UNIT, SLT HOLDER, LEAF SW UNIT 1. Remove the screw of o. 2. Remove the CF CLIPPING1 SPRING. 3. Remove the screw of q. 4. Remove the LEAF SW COVER. 5. Remove the cable of the BAT BOX SUB UNIT. 6. Remove the three screws of q. 7. Remove the nine dowels, then remove the HV MODULE UNIT, SLT HOLDER and LEAF SW UNIT. NOTE1 (Assembling) When installing the HV MODULE UNIT, SLT HOLDER and LEAF SW UNIT, insert the flexible board of the HV MODULE UNIT into the grooves of the R/C HOLDER (Two places). (2) R/C HOLDER 1. Remove the screw of q. 2. Remove the R/C HOLDER. NOTE2 (Assembling) Route the cable of the BATTERY BOX SUB UNIT so that it passes the back side of the R/C HOLDER as shown in the illustration. 3-31 CHAPTER 3. REPAIR INSTRUCTION HV MODULE UNIT Soldering SLT HOLDER (2)-1 NOTE (Assembling) LEAF SW UNIT Insert the SI sensor of the HV MODULE UNIT into the SLT HOLDER firmly. Flexible board of the HV MODULE UNIT (1)-1 (1)-2 SI sensor of the HV MODULE UNIT Claws (1)-2 Claws SLT HOLDER Dowel Fig. 3-32 HV MODULE UNIT, LEAF SW UNIT 2.3.5.2 HV MODULE UNIT, LEAF SW UNIT (1) HV MODULE UNIT 1. Remove the flexible board of the HV MODULE UNIT from the dowel. 2. Remove the four claws, then remove the SLT HOLDER from the SI sensor of the HV MODULE UNIT. NOTE (Assembling) Insert the SI sensor of the HV MODULE UNIT into the SLT HOLDER firmly. (2) LEAF SW UNIT 1. Remove the soldering, then remove the LEAF SW UNIT from the HV MODULE UNIT. 3-32 CHAPTER 3. REPAIR INSTRUCTION 2.4 Screw List a b c d CB1-1998-000 CD1-3108-000 CD1-3798-000 CD1-5028-000 2.0mm 3.0mm METAL M1.7 METAL M1.7 3.0mm 3.0mm METAL M1.7 BLACK M1.7 e f g h CD1-5030-000 CD1-5031-000 CD1-5032-000 CD1-5033-000 BLACK M1.7 (SELF TAP) BLACK M1.7 (SELF TAP) j k l CD1-4987-000 XA1-7170-147 XA1-7170-167 BLACK M1.7 BLACK M1.7 i CD1-4983-000 1.6mm 1.4mm 3.0mm SILVER M1.7 SILVER M1.7 5.5mm 4.0mm 4.5mm 4.0mm METAL M1.7 1.6mm METAL M1.7 m n o p XA1-7170-307 XA1-7170-357 XA4-5170-307 XA4-5170-409 3.0mm METAL M1.7 METAL M1.7 3.0mm 3.5mm 4.0mm BLACK M1.7 (SELF TAP) METAL M1.7 (SELF TAP) q r s T XA4-9170-359 XA4-9170-407 XA4-9170-457 XA1-3170-407 4.0mm 3.5mm BLACK M1.7 (SELF TAP) 4.0mm METAL M1.7 (SELF TAP) 4.5mm METAL M1.7 (SELF TAP) 3-33 METAL M1.7 CHAPTER 3. REPAIR INSTRUCTION 3. Adjustments 3.1 Replacement Parts and Adjustment Items PowerShot G5 requires electrical adjustments when certain parts are replaced. The table below indicates the adjustments required for the respective part replacements. For all other parts not listed below, no electrical adjustments are necessary after replacement. Adjustment Items CCD Adjustment Optical Unit Adjustment Replacement Part Imaging Process Color Pixel Dot LCD Flash Adjustment Adjustment Adjustment Adjustment Adjustment BATTERY BOX UNIT DC/DC CONV. UNIT OPTICAL UNIT #1 #2 #3 #4 #5 FLASH UNIT MAIN PCB ASS’Y LCD PCB ASS’Y LCD PANEL BACK LIGHT UNIT : Adjustment is necessary after replacement. : Adjustment is necessary after replacement. (Adjustment is not necessary, only if the adjustment data has been saved and then transferred after the part is replaced.) Blank : Adjustment is unnecessary. ∗ When OPTICAL UNIT is replaced, adjust certainly at the procedure as below. #1. CCD Adjustment #2. Optical Unit Adjustment #3. Imaging Process Adjustment #4. Color Adjustment #5. Pixel Dot Adjustment #6. Flash Adjustment 3-34 #6 CHAPTER 3. REPAIR INSTRUCTION 3.2 Adjustment Tools The following tools are required for electrical adjustment. DESCRIPTION PARTS NO. PC/AT-Compatible Machine (Windows 2000 or 98 pre-installed Model, USB port) — SERVICE MANUAL (CD-ROM) REMARKS Local purchase CY8-4386-031 ADJUSTMENT SOFTWARE — Download Compact Power Adapter CA-560 — Enclosed in Merchandise AC Cable — Enclosed in Merchandise INTERFACE CABLE IFC-300PCU — (or Local purchase) Brightness Box (light source A) — (Verified with EF-5000) Color Viewer (5600° K) DY9-2039-100 Color Bar Chart DY9-2002-000 18% Gray Chart CY4-6016-000 Auto Focus Chart — W-10 Filter *1 CY9-1556-000 C-2 Filter CY9-1561-000 C-12 Filter CY9-1555-000 FL-W Filter CY9-1557-000 ND-4 Filter CY9-1553-000 ND-8 Filter CY9-1554-000 Attached to “SERVICE MANUAL (CD-ROM)” 2types *2 Light-Shielding Cloth (500 × 500 or larger) — Local purchase Tripod — Local purchase Reference Camera — Merchandise Speedlite 420EX — Merchandise Gray. jpg File — DIGITAL CAMERA SolutionDisk — *1 *2 Enclosed in Merchandise 2pcs. required. The file containing “How to print out” and Chart for print-out is in the Service Manual APPENDIX. 3-35 CHAPTER 3. REPAIR INSTRUCTION 3.3 Before Starting Electrical Adjustments 3.3.1 TWAIN Driver Installation Install the USB Driver for Adjustment in the CD-ROM to PC. (“This Adjustment Software” is impossible when the RS-232C TWAIN driver is used.) 3.3.2 Factory Mode Driver Installation After downloading and extracting Factory Mode Driver, double-click Setup.exe (\Factory Mode Driver\Win 2000_98\Setup.exe) to install it. If InstallShield Wizard appears as shown in the first picture below, install the TWAIN (Factory Mode) Driver by following the instructions. 1 ) The InstallShield Wizard will install TWAIN Driver on your computer. Click the “??[N]>” button. 2 License Agreement ) See the file “Service Manual/English/Ch6/ License.pdf” for the contents of the License. Click the “??[Y]” button. 3-36 CHAPTER 3. REPAIR INSTRUCTION 3 Choose Destination Location Select folder where Setup will install files. ) Click the “??[N]>” button. 4 InstallShield Wizard Complete ) Click the “??” button. 5 Click the “OK” button. Installing TWAIN (Factory Mode) Driver is completed. If you cannot install Factory Mode Driver in above procedure, install it in the following procedure. 1. Change the camera to Factory mode. 2. Install Wizard of new hardware starts up. 3. Select the option that directly chooses the driver’s place. 4. Choose CAP_FACT.INF (Factory Mode Driver\Win2000_98\Win_2k98\CAP_FACT.INF). 5. Installment starts. When the Wizard finishes, the installment finishes. 3-37 CHAPTER 3. REPAIR INSTRUCTION 3.3.3 Adjustment Software Installation 1. After downloading and extracting Adjustment Software, double-click Setup.exe to install it. (Adjustment Softwares are different according to the model of camera that you are going to adjust.) 2. When the dialog box below appears, click the “OK” button. button. (Software installation will then begin.) 3. When the dialog box below appears, click the 4. When the dialog box below appears, click the “Continue” button. (In the case that you do not add a shortcut on desktop, remove clicking from the check box.) 3-38 CHAPTER 3. REPAIR INSTRUCTION 3.3.4 Preparation Before starting up the Adjustment Software, follow the preparatory steps below: 1. 2. 3. 4. Obtain all the tools necessary for the adjustment. Connect the Camera to the Power Source with the Compact Power Adapter CA-560 & AC Cable. Set the Replay Mode on the camera and turn on. Set the Communication Mode to Normal. Personal Computer USB INTERFACE CABLE IFC-300PCU CAMERA BODY DIGITAL Compact Power Adapter CA-560 5. Connect the Camera’s Digital terminal to the PC’s USB Port with INTERFACE CABLE IFC-300 PCU. 6. Turn on the camera. Note: Perform the preparation in the following order otherwise the camera won’t work properly. 3-39 CHAPTER 3. REPAIR INSTRUCTION 3.3.5 Starting up the Adjustment Software After completing the preparatory steps, click Start and move the cursor to Program; then select Canon Digital Camera and click PowerShot G5 Adjustment. 3.3.6 Menu Window When the Adjustment Software starts up, the Menu Window below will appear. 3.3.7 How to Use the Adjustment Software ■ Mode change This camera uses normally PTP for communication with PC. Because calibration and adjustment become impossible depending on the condition of PTP, select the TWAIN mode of the PTP before starting calibration and adjustment. • “FA Mode” button: This button is used to change the mode from the USER mode to the FA mode. (PTP to TWAIN) * Before starting calibration and adjustment, be sure to set the FA mode. • “USER Mode” button: This button is used to change the mode from the FA mode to the USER mode. (TWAIN to PTP) * When calibration and adjustment are completed, be sure to change the mode to the USER mode before quitting the software. ■ Calibration/Adjustment For starting, click the button related with calibration/adjustment. * Whenever you use your light source for the adjustment for the first time, be sure to click the “Calibration” Button. ■ Quitting the Adjustment Software Click the “Exit” button. ■ Saving or Loading data • “Save” button : This button saves all adjustment data stored on the camera in text format. • “Load” button : This button loads all adjustment data saved in text format to the camera. ■ Notes • If the adjustment fails, a message indicating the failure will appear on each product. If this happens, do the adjustment again. • The Adjustment Software is dedicated only to Canon Digital Camera PowerShot G5. Never use it for any other camera. • The Windows2000 or 98 must be pre-installed on the computer that is equipped with the USB terminal. * Operations on the other Operating Systems such as Windows95, Windows XP and others are not guaranteed. (Because Windows95 does not support USB.) 3-40 CHAPTER 3. REPAIR INSTRUCTION 3.4 Calibration 3.4.1 Calibration ■ Tools Used • Personal Computer • SERVICE MANUAL (CD-ROM) • ADJUSTMENT SOFTWARE • Compact Power Adapter CA-560 • AC Cable • INTERFACE CABLE IFC-300PCU • Brightness Box (light source A) • Color Viewer (5600° K) • Color Bar Chart • W-10 Filter (2pcs.) • C-2 Filter • C-12 Filter 1 Click the “Calibration” button. 2 1. When the message on the right appears, check that the reference camera (Merchandise) is connected to the computer. 2. Click the “OK” button. 3 When the message on the right appears, go to 4. 3-41 • FL-W Filter • ND-4 Filter • ND-8 Filter • Reference Camera (Merchandise) • DIGITAL CAMERA SolutionDisk CHAPTER 3. REPAIR INSTRUCTION 4 1. Place the camera so that lens is set against the light source surface of the Brightness Box via the C-2 Filter and the C-12 Filter. 2. Set the Brightness Box to EV12. 3. Click the “Check” button. 4. Check the Brightness level if it is within 0 ± 5. * If not, calibrate the Brightness Box until it becomes within 0 ± 5. 5. Click the “NEXT” button. C-2 Filter & C-12 Filter Brightness Box CAMERA BODY Power Source Personal Computer 5 1. When the message on the right appears, Set the Brightness Box to EV15 and attach the ND-8 Filter while setting the C-2 Filter and the C-12 Filter between the lens. 2. Click the “Check” button. 3. Check the Brightness level if it is within 0 ± 5. * If not, calibrate the Brightness Box until it becomes within 0 ± 5. 4. Click the “NEXT” button. 6 When the message on the right appears go to 7. 7 1. Attach the ND-4 Filters between the Lens and the Color Viewer. 2. Place the camera so that the lens is set against the center part of the Color Viewer. 3. Click the “ADJUST” button. Color Viewer ND-4 Filter CAMERA BODY Power Source Stand Personal Computer 3-42 CHAPTER 3. REPAIR INSTRUCTION 8 When the message on the right appears go to 9. 9 1. Remove the ND-4 Filter. 2. Attach the two W-10 Filters between the Lens and the Color Viewer. Place the camera so that the lens is set against the center part of the Color Viewer. 3. Click the “ADJUST” button. Color Viewer W-10 Filter CAMERA BODY Power Source Stand Personal Computer 10 When the message on the right appears go to 11. 11 1. Remove the two W-10 Filters. 2. Attach the C-12 and the FL-W Filter between the Lens and the Color Viewer. Place the camera so that the lens is set against the center part of the Color Viewer. 3. Click the “ADJUST” button. C-12 Filter FL-W Filter Color Viewer CAMERA BODY Power Source Stand Personal Computer 3-43 CHAPTER 3. REPAIR INSTRUCTION 12 When the message on the right appears go to 13. 13 1. Attach the Color Bar Chart to the Color Viewer. 2. Place the camera so that the Viewing image of the color bar chart is the full of LCD with the ND-4 Filter attached. 3. Click the “ADJUST” button. Color Viewer Color Bar Chart ND-4 Filter CAMERA BODY Power Source Personal Computer 14 1. Shift a frame on the display screen with a mouse to choose a color of color bar. 2. Click the “Sampling” button. 15 Check “Save as the Reference”, and click the “OK” button to store the data. 3-44 Stand CHAPTER 3. REPAIR INSTRUCTION 16 When the message on the right appears, click the “FINISH” button. (This ends the “Calibration”.) 3-45 CHAPTER 3. REPAIR INSTRUCTION 3.5 Adjustment Procedure 3.5.1 CCD Adjustment ■ Tools Used • Personal Computer • SERVICE MANUAL (CD-ROM) • ADJUSTMENT SOFTWARE • Compact Power Adapter CA-560 • AC Cable 1 Click the “CCD” button. 2 When the message on the right appears, go to 3. 3 1. Place the camera so that lens is set against the light source surface of the Brightness Box via the C-2 Filter and the C-12 Filter. 2. Set the Brightness Box to EV12. 3. Click the “ADJUST” button. • INTERFACE CABLE IFC-300PCU • Brightness Box (light source A) • C-2 Filter • C-12 Filter • DIGITAL CAMERA SolutionDisk C-2 Filter & C-12 Filter Brightness Box CAMERA BODY Power Source Personal Computer 3-46 CHAPTER 3. REPAIR INSTRUCTION 4 When the message on the right appears, set the Brightness Box to EV15 while setting the C-2 Filter and the C-12 Filter between the lens. Click the “ADJUST” button. 5 When the message on the right appears, click the “FINISH” button. (This ends the “CCD” Adjustment.) 3-47 CHAPTER 3. REPAIR INSTRUCTION 3.5.2 Optical Unit Adjustment ■ Tools Used • Personal Computer • SERVICE MANUAL (CD-ROM) • ADJUSTMENT SOFTWARE • Compact Power Adapter CA-560 • AC Cable 1 Click the “Optical Unit” button. 2 When the message on the right appears, go to 3. 3 1. Place the Auto Focus Chart (1) at 48.0cm away from the front of the camera finder. * Place the Auto Focus Chart on a plain color wall or equivalent. * Adjust the light so that the brightness of the chart will be about EV8.5. 2. Adjust the position of the camera finely so that the center of the Auto Focus Chart is aligned with the center of the LCD. 3. Click the “ADJUST” button. • INTERFACE CABLE IFC-300PCU • AutoFocus Chart (2 types) • Tripod • DIGITAL CAMERA SolutionDisk AutoFocus Chart (1) 48.0cm Power Source Personal Computer 3-48 CAMERA BODY Tripod CHAPTER 3. REPAIR INSTRUCTION 4 When the message on the right appears, go to 5. 5 1. Place the Auto Focus Chart (2) at 128.0cm away from the front of the camera finder. * Place the Auto Focus Chart on a plain color wall or equivalent. * Adjust the light so that the brightness of the chart will be about EV8.5. 2. Adjust the position of the camera finely so that the center of the Auto Focus Chart is aligned with the center of the LCD. 3. Click the “ADJUST” button. 6 When the message on the right appears, click the “FINISH” button. (This ends the “Optical Unit” Adjustment) 3-49 AutoFocus Chart (2) 128.0cm Power Source Personal Computer CAMERA BODY Tripod CHAPTER 3. REPAIR INSTRUCTION 3.5.3 Imaging Process Adjustment ■ Tools Used • Personal Computer • SERVICE MANUAL (CD-ROM) • ADJUSTMENT SOFTWARE • Compact Power Adapter CA-560 • AC Cable • INTERFACE CABLE IFC-300PCU 1 Click the “Imaging Process” button. 2 When the message on the right appears, go to 3. 3 1. Attach the ND-4 Filters between the Lens and the Color Viewer. 2. Place the camera so that the lens is set against the center part of the Color Viewer. 3. Click the “ADJUST” button. • Color Viewer (5600° K) • W-10 Filter (2 pcs.) • C-12 Filter • FL-W Filter • ND-4 Filter • DIGITAL CAMERA SolutionDisk Color Viewer ND-4 Filter CAMERA BODY Power Source Stand Personal Computer 3-50 CHAPTER 3. REPAIR INSTRUCTION 4 When the message on the right appears, go to 5. 5 1. Remove the ND-4 Filter. 2. Attach the two W-10 Filters between the Lens and the Color Viewer. Place the camera so that the lens is set against the center part of the Color Viewer. 3. Click the “ADJUST” button. Color Viewer W-10 Filter CAMERA BODY Power Source Stand Personal Computer 6 When the message on the right appears, go to 7. 7 1. Remove the W-10 Filter. 2. Attach the C-12 and FL-W Filters between the Lens and the Color Viewer. Place the camera so that the lens is set against the center part of the Color Viewer. 3. Click the “ADJUST” button. C-12 Filter FL-W Filter Color Viewer CAMERA BODY Power Source Stand Personal Computer 3-51 CHAPTER 3. REPAIR INSTRUCTION 8 When the message on the right appears, click the “FINISH” button. (This ends the “Imaging Process” Adjustment.) 3-52 CHAPTER 3. REPAIR INSTRUCTION 3.5.4 Color Adjustment ■ Tools Used • Personal Computer • SERVICE MANUAL (CD-ROM) • ADJUSTMENT SOFTWARE • Compact Power Adapter CA-PS560 • AC Cable • INTERFACE CABLE IFC-300PCU • Color Viewer (5600° K) • Color Bar Chart • ND-4 Filter • DIGITAL CAMERA SolutionDisk 1 Click the “Color” button. 2 When the message on the right appears, go to 3. 3 1. Attach the Color Bar Chart to the Color Viewer. 2. Place the camera so that the Viewing image of the color bar chart is the full of LCD with the ND-4 Filter attached. 3. Click the “ADJUST” button. Color Viewer Color Bar Chart ND-4 Filter CAMERA BODY Power Source Personal Computer 3-53 Stand CHAPTER 3. REPAIR INSTRUCTION 4 1. Shift a frame on the displayed screen with a mouse to choose a color of color bar. 2. Click the “Sampling” button. 5 Check “Yellow and Red”, and click the “OK” button. If these data are within specification, go to 7. * Specification Ave_Cr = Reference Camera ± 10 Ave_Cb = Reference Camera ± 10 6 1. Confirm to see that the image on the PC monitor satisfies the specifications. 2. If the image on the PC monitor does not satisfy the specifications, change the data using UP, DOWN button or change the data directly by typing the data in the text box. Then click the “UPDATE” button. 7 When the adjustment is completed, click the “FINISH” button. (This ends the “Color” Adjustment.) 3-54 CHAPTER 3. REPAIR INSTRUCTION 3.5.5 Pixel Dot Adjustment ■ Tools Used • Personal Computer • SERVICE MANUAL (CD-ROM) • ADJUSTMENT SOFTWARE • Compact Power Adapter CA-560 • AC Cable • INTERFACE CABLE IFC-300PCU • Brightness Box (Light source A) • C-2 Filter • C-12 Filter • Light-Shielding Cloth (500 × 500 or larger) • DIGITAL CAMERA SolutionDisk 1 Click the “Pixel Dot” button. 2 When the message on the right appears, go to 3. 3 1. Place the camera so that lens is set against the light source surface of the Brightness Box via the C-2 Filter and the C-12 Filter. 2. Set the Brightness Box to EV12. 3. Click the “ADJUST” button. C-2 Filter & C-12 Filter Brightness Box CAMERA BODY Power Source Personal Computer 3-55 CHAPTER 3. REPAIR INSTRUCTION 4 1. When the message on the right appears, cover the camera with the Light-Shielding Cloth so that the no light reasons the CCD. 2. Click the “ADJUST” button. 5 When the message on the right appears, click the “FINISH” button. (This ends the “Pixel Dot” Adjustment.) 3-56 CHAPTER 3. REPAIR INSTRUCTION 3.5.6 LCD Adjustment ■ Tools Used • Personal Computer • SERVICE MANUAL (CD-ROM) • ADJUSTMENT SOFTWARE • Compact Power Adapter CA-560 • AC Cable • INTERFACE CABLE IFC-300PCU • Reference Camera (Merchandise) • DIGITAL CAMERA SolutionDisk ■ 1. 2. 3. Preparation Insert the blank CF Card into the reference camera. Connect the reference camera with the PC. Add the “Gray.jpeg” image to the CF card of the refernce camera using Zoom Browser EX. (Gray.jpg is in the folder of Adjustment Software downloaded.) 4. Finish the ZoomBrowser EX. 5. Disconnect the reference camera from the PC, and display the “Gray.jpg” image in PLAY mode. 1 Click the “LCD” button. 2 1. When the message on the right appears, enter in the text boxes the data written on the datasheet is attached to the JAL PCB ASS’Y. Click the “Update” button. 2. Compare the image with that of the reference camera. If it has a different color tint. adjust it by repeating clicking the Yellow/Blue button and the “Update” button alternately. 3. Click the “FINISH” button. (This ends the “LCD” Adjustment.) 3-57 CHAPTER 3. REPAIR INSTRUCTION 3.5.7 Flash Adjustment ■ Tools Used • Personal Computer • SERVICE MANUAL (CD-ROM) • ADJUSTMENT SOFTWARE • Compact Power Adapter CA-560 • AC Cable 1 Click the “Flash” button. 2 When the message on the right appears, go to 3. 3 Attach “Speedlite 420EX” on the camera, and turn it on. Set 18% Gray Chart 98cm from the finder front. Make the room as dark as a darkroom. Click the “ADJUST” button. • INTERFACE CABLE IFC-300PCU • 18% Gray Chart • Tripod • DIGITAL CAMERA SolutionDisk 18% Gray Chart 98cm Ext.Flash Power Sorce CAMERA BODY Personal Computer 3-58 Tripod CHAPTER 3. REPAIR INSTRUCTION 4 When the message on the right appears, click the “FINISH” button. (This ends the “Flash” Adjustment.) 3-59 CHAPTER 3. REPAIR INSTRUCTION 3.5.8 Checking of sound recording/output It is not required to adjust the recording/output (volume, etc.) of sound. Check the camera if the sound is recorded/play-backed properly. 3-60 CHAPTER 4. PARTS CATALOG CONTENTS PowerShot G5 CASING PARTS SECTION --------------------------------------------------------------------------------------------------INTERNAL PARTS SECTION-1 --------------------------------------------------------------------------------------------INTERNAL PARTS SECTION-2 --------------------------------------------------------------------------------------------TOP COVER SECTION -------------------------------------------------------------------------------------------------------EVF UNIT SECTION ----------------------------------------------------------------------------------------------------------BATTERY BOX UNIT SECTION -------------------------------------------------------------------------------------------- Pg1 Pg2 Pg3 Pg4 Pg5 Pg6 Fuse ------------------------------------------------------------------------------------------------------------------------------------- Pg7 Accessories-1 ------------------------------------------------------------------------------------------------------------------------- Pg8 Accessories-2 ------------------------------------------------------------------------------------------------------------------------- Pg9 Accessories-3 ------------------------------------------------------------------------------------------------------------------------ Pg10 Service Tools-1 ---------------------------------------------------------------------------------------------------------------------- Pg11 Service Tools-2 ---------------------------------------------------------------------------------------------------------------------- Pg12 Category of CLASS A: Frequency of use: High B: Frequency of use: Middle C: Frequency of use: Low D: Safety-related critical parts E: Consumable parts F: Standard screws and washers S: Supply of the parts is limited Y: Service Tools PowerShot G5 Pg1 CASING PARTS SECTION 8 See Pg4 23 24 16 9 7 22 10 b 11 See Pg2 a 16 21 b 6 15 19 20 5 4 2 18 12 3 13 a 25 1 17 25 16 14 PowerShot G5 Pg1 PARTS LIST SYMBOL PARTS NO. CLASS QTY DESCRIPTION REMARKS 1 2 CM1-1618-000 CM1-1607-000 B B 1 1 FRONT CAP UNIT FRONT COVER UNIT 3 4 CM1-1617-000 CD1-3264-000 B B 1 1 BATTERY LID UNIT HOLDER, DATE BATTERY 5 CD1-4778-000 C 1 HOLDER, BATTERY SHAFT 6 7 CD1-4782-000 CD1-5010-000 C B 1 1 SPRING, CF CLIPPING 2 COVER, CF 8 9 CD1-4837-000 CM1-1604-000 B B 1 1 BASE, STRAP RIGHT REAR COVER UNIT 10 CD1-5004-000 B 2 BUSH, LCD 11 12 CS8-5211-000 CD1-4995-000 C B 1 1 SPRING, SELECTOR COVER, SIDE 13 14 CS8-3256-000 CD1-5007-000 C B 1 1 SHAFT, JACK COVER COVER, JACK 15 CY1-6290-000 B 1 PLATE, BODY NUMBER (J) (FOR JAPAN) #13111xxxxx CY1-6291-000 CY1-6292-000 B B 1 1 PLATE, BODY NUMBER (N) PLATE, BODY NUMBER (E) (FOR USA, CANADA) #13211xxxxx (FOR EUROPE, ASIA) #13311xxxxx CY1-6296-000 CD1-5030-000 B C 1 5 PLATE, BODY NUMBER (CH) SCREW (FOR CHINA) #13651 xxxxx 16 17 CD1-5028-000 C 1 SCREW 18 19 CD1-5032-000 CD1-5033-000 C C 1 1 SCREW SCREW 20 21 XA4-9170-359 XA4-5170-307 F F 1 1 SCREW SCREW 22 XA4-9170-407 F 2 SCREW 23 24 XA1-7170-357 XA1-7170-307 F F 1 2 SCREW SCREW 25 CD1-5031-000 C 2 SCREW PowerShot G5 Pg2 INTERNAL PARTS SECTION-1 5 6 11 See Pg3 8 8 10 See Pg5 7 7 1 8 2 3 N.S 4 9 PowerShot G5 Pg2 PARTS LIST SYMBOL PARTS NO. CLASS QTY DESCRIPTION 1 2 CM1-1615-000 CD1-3213-000 C C 1 1 MAIN BARREL UNIT HOLDER, MICROPHONE 3 4 CM1-1564-010 CD1-4850-000 C C 1 1 MICROPHONE UNIT FRAME, SIDE COVER 5 CM1-1619-000 C 1 PCB ASS’Y, MAIN 6 7 CD1-4911-000 XA4-9170-359 C F 1 2 SHEET, MAIN SCREW 8 9 XA1-7170-307 CD1-3108-000 F C 3 1 SCREW SCREW 10 CD1-3798-000 C 2 SCREW 11 CD1-4987-000 C 2 SCREW REMARKS PowerShot G5 Pg3 INTERNAL PARTS SECTION-2 21 1 3 d 4 24 25 2 21 17 16 20 21 15 25 c 21 18 c 19 21 24 a See Pg6 24 14 7 8 21 23 21 24 21 9 21 b a 23 10 d 24 12 13 b 22 22 11 5 6 PowerShot G5 Pg3 PARTS LIST SYMBOL PARTS NO. CLASS QTY DESCRIPTION 1 2 CM1-1463-000 CM1-1602-000 B B 1 1 FINDER UNIT OPTICAL UNIT 3 4 CD1-3869-000 CS8-5209-000 C C 1 1 HOLDER, LED SPRING, CCD 5 CK1-0670-000 C 1 FPC, MAIN/FLASH 6 7 CM1-1632-000 CD1-4433-000 C C 1 1 PCB ASS’Y, DC/DC CONVERTER PLATE, ZOOM GND 8 9 CD1-4838-000 CD1-4844-010 C C 1 1 FRAME, SUB BASE, TRIPOD 10 CD1-4748-000 C 1 FRAME, MAIN 11 12 CM1-1473-010 CM1-1631-000 C C 1 1 FLASH/JACK UNIT SPEAKER UNIT 13 14 CD1-4848-000 CM1-1641-000 C C 1 1 BUSH, SPEAKER CF UNIT 15 CD1-4765-000 C 1 FRAME, REAR 16 17 CM1-1638-000 CD1-4762-000 C C 1 1 PCB ASS’Y, BUTTON BASE, SEL. BUTTON 18 19 CD1-4812-000 CM1-1614-000 C C 1 1 HOLDER, EF SENSOR BAT BOX UNIT 20 CM1-1642-000 B 1 FRONT LENS UNIT 21 22 XA4-9170-359 CB1-1998-000 F C 12 6 SCREW SCREW 23 24 CD1-3798-000 XA1-7170-307 C F 2 6 SCREW SCREW 25 XA1-7170-147 F 4 SCREW REMARKS PowerShot G5 Pg4 TOP COVER SECTION 7 6 3 21 4 5 1 15 14 18 19 16 8 17 11 24 20 12 9 10 13 2 23 22 24 PowerShot G5 Pg4 PARTS LIST SYMBOL PARTS NO. CLASS QTY DESCRIPTION 1 2 CD1-4836-000 CM1-1608-000 B C 1 1 BASE, STRAP LEFT B/W LCD UNIT 3 4 CD1-5019-000 XG8-1500-591 B C 1 1 DIAL, MODE BALL, MODE DIAL 5 CS8-5292-000 C 1 SPRING, MODE DIAL 6 7 CM1-1610-000 CD1-5018-000 B B 1 1 TOP COVER UNIT CAP, MODE DIAL 8 9 CL1-1106-000 CD1-5027-000 C B 1 1 MODE DIAL BASE UNIT BUTTON, TOP3 10 CD1-5024-000 B 1 BUTTON, TOP1 11 12 CD1-5025-000 CD1-4826-000 B B 1 1 BUTTON, TOP2 WINDOW, B/W LCD 13 14 CD1-4824-000 CA1-9328-000 C C 1 1 SEAL, DUST COVER SPRING, ACCESSORY SHOE 15 CM1-1611-000 B 1 ZOOM LEVER UNIT 16 17 CD1-4846-000 CS8-5293-000 C C 1 1 BRUSH, ZOOM SPRING, ZOOM 18 19 CB1-6258-000 CA1-6504-000 B C 1 1 ACCESSORY CONTACT UNIT SHOE, ACCESSORY 20 CD1-3108-000 C 2 SCREW 21 22 XA1-3170-407 XA1-7170-167 F F 4 2 SCREW SCREW 23 24 XA4-5170-409 XA4-9170-359 F F 2 2 SCREW SCREW REMARKS PowerShot G5 Pg5 EVF UNIT SECTION 6 12 11 7 a c 5 4 12 d 3 2 13 b b c a d 1 8 10 9 PowerShot G5 Pg5 PARTS LIST SYMBOL PARTS NO. CLASS QTY DESCRIPTION 1 2 CD1-5001-000 WG2-5219-000 B C 1 1 COVER, LCD FRAME PANEL, LCD 3 WG2-5219-001 CM1-1572-000 C C 1 1 PANEL, LCD (SELECTION) BACK LIGHT UNIT 4 CD1-4751-000 C 1 PLATE, NUT 5 6 CM1-1490-010 CD1-4752-000 C C 1 1 PCB ASS’Y, LCD SHEET, LCD 7 8 CD1-5002-000 CM1-1621-000 B C 1 1 COVER, LCD TOP HINGE UNIT 9 CD1-5003-000 B 1 COVER, HINGE 10 11 XA1-7170-307 XA4-9170-359 F F 1 2 SCREW SCREW 12 13 CD1-5028-000 CD1-4983-000 C C 4 2 SCREW SCREW REMARKS PowerShot G5 Pg6 BATTERY BOX UNIT SECTION 7 1 3 2 8 4 8 8 5 8 6 8 PowerShot G5 Pg6 PARTS LIST SYMBOL PARTS NO. CLASS QTY DESCRIPTION 1 2 CD1-4781-000 CD1-4795-000 C C 1 1 SPRING, CF CLIPPING 1 COVER, LEAF SW 3 4 CL1-1107-000 CD1-4796-000 C C 1 1 LEAF SW UNIT HOLDER, R/C 5 CD1-4299-000 C 1 HOLDER, SLT 6 7 CM1-1639-000 XA4-5170-307 C F 1 1 HV MODULE UNIT SCREW 8 XA4-9170-359 F 5 SCREW REMARKS PowerShot G5 Pg7 Fuse 2 1 DC/DC CONVERTER PCB ASS’Y PowerShot G5 Pg7 PARTS LIST SYMBOL 1 2 PARTS NO. CY4-6073-000 CY4-6074-000 CLASS QTY D D 2 1 DESCRIPTION FUSE, DAITO KMC20 FUSE, MATSU. DENKI UNHS206 REMARKS F11, F12 F13 PowerShot G5 Pg8 Accessories-1 Neck Strap NS-DC2 USB Interface Cable IFC-300PCU 1 N.S Lens Cap AV Cable AVC-DC100 2 N.S CF Card FC-32M FC -3 2M Wireless Controller WL-DC100 4 N.S N.S N.S Canon Digital Camera Solution Disk, ArcSoft camera Suite Disk 3 CF CASE 5 N.S N.Sl : N.S Stand for No Stock (Product available) PowerShot G5 Pg8 PARTS LIST SYMBOL PARTS NO. CLASS QTY DESCRIPTION REMARKS 1 2 C84-1157-000 C84-1156-000 B B 1 1 STRAP, NECK LENS CAP UNIT 3 C84-1168-000 C84-1169-000 S S 1 1 CD-ROM, SOLUTION VER.13.0 (J/E) FOR JAPAN CD-ROM, SOLUTION VER.13.0 (E/F/S) FOR USA, CANADA C84-1170-000 S 1 CD-ROM, SOLUTION VER.13.0 (J/E/C) CY1-6074-000 FC2-9610-000 B B 1 1 HOLDER, BATTERY CASE, CF 4 5 FOR ASIA, AUSTRALIA PowerShot G5 Pg9 Accessories-2 Compact Power Adapter CA-560 Wide Converter WC-DC58N 1 7 2 N.S 3 N.S 8 J N PLUG TYPE E B A Tele Converter TC-DC58N Battery Pack BP-511 9 N.S 4 N.S 8 Charger Adapter/Car Battery Cable Kit CR-560 N.S 5 DC CABLE 6 CB-560 N.Sl : N.S Stand for No Stock (Product available) PowerShot G5 Pg9 PARTS LIST SYMBOL PARTS NO. CLASS QTY DESCRIPTION REMARKS 1 2 D89-0900-000 DY4-4763-000 C C 1 1 CORE, FERRITE CORD, DC 3 D82-0641-000 D82-0642-000 C C 1 1 CABLE, AC (J) CABLE, AC (N) FOR JAPAN FOR USA, CANADA D82-0643-000 C 1 CABLE, AC (E) FOR EUROPE, ASIA D82-0644-000 D82-0645-000 C C 1 1 CABLE, AC (B) CABLE, AC (A) FOR ASIA FOR AUSTRALIA 4 5 DY1-8242-000 DY1-8244-000 C C 1 1 COVER, TERMINAL BP-511/BP522 DC CABLE 6 DY1-8243-000 C 1 CAR BATTERY CABLE CB-560 7 8 CD1-4929-000 CD1-4931-000 B B 1 1 CAP, FRONT CAP, REAR 9 CD1-4933-000 B 1 CAP, FRONT PowerShot G5 Pg10 Accessories-3 Camera User Guide 1 Software Starter Guide 2 System Map 3 Quick Start Guide 4 PowerShot G5 Pg10 PARTS LIST SYMBOL 1 2 3 4 PARTS NO. CLASS QTY DESCRIPTION REMARKS CDI-E075-000 S 1 I.BOOK (E) PS G5 FOR USA, CANADA, ASIA, AUSTRALIA CDI-F064-000 CDI-J066-000 S S 1 1 I.BOOK (F) PS G5 I.BOOK (J) PS G5 FOR CANADA FOR JAPAN CDI-S065-000 S 1 I.BOOK (S) PS G5 FOR USA CDI-E089-000 S 1 SOFTWARE GUIDE (E) VER.13.0 FOR USA, CANADA, ASIA, AUSTRALIA CDI-F078-000 CDI-J080-000 S S 1 1 SOFTWARE GUIDE (F) VER.13.0 SOFTWARE GUIDE (J) VER.13.0 FOR CANADA FOR JAPAN CDI-S078-000 S 1 SOFTWARE GUIDE (S) VER.13.0 FOR USA CDI-E076-000 S 1 SYSTEM MAP (E) PS G5 FOR USA, CANADA, ASIA, AUSTRALIA CDI-F066-000 CDI-J067-000 S S 1 1 SYSTEM MAP (F) PS G5 SYSTEM MAP (J) PS G5 FOR CANADA FOR JAPAN CDI-S066-000 S 1 SYSTEM MAP (S) PS G5 FOR USA CDI-E077-000 S 1 QUICK START GUIDE (E) FOR USA, CANADA, ASIA, AUSTRALIA CDI-F066-000 CDI-J068-000 S S 1 1 QUICK START GUIDE (F) QUICK START GUIDE (J) FOR CANADA FOR JAPAN CDI-S067-000 S 1 QUICK START GUIDE (S) FOR USA PowerShot G5 Pg11 Service Tools-1 DIA BOND NO.1663G BLACK Three Bond 1401C 5 1 LOGENEST RAMBDA A-74 2 Adhesive Tape SONY T4000 3 Adhesive Tape 3M NO.56 4 PowerShot G5 Pg11 PARTS LIST SYMBOL PARTS NO. CLASS QTY DESCRIPTION REMARKS 1 2 CY9-8129-000 CY9-8102-000 Y Y 1 1 BOND, DIA BOND NO.1663G BLACK LUBE, LOGENEST RAMBDA A-74 200ml 80g 3 4 CY4-6012-000 CY4-6018-000 Y Y 1 1 ADHESIVE TAPE, SONY T4000 ADHESIVE TAPE, 3M NO.56 6mm x 50m Roll 5 CY9-8011-000 Y 1 BOND, THREE BOND 1401C 200g PowerShot G5 Pg12 Service Tools-2 Service Manual CD-ROM C-12 Filter ND-2 Filter 5 8 W-10 Filter ND-4 Filter 6 9 FL-W Filter ND-8 Filter 7 10 1 Color Viewer (5600° K) 2 Standard Color Bar Chart 3 18% Gray Chart 4 PowerShot G5 Pg12 PARTS LIST SYMBOL PARTS NO. CLASS QTY DESCRIPTION 1 2 CY8-4386-031 DY9-2039-100 Y Y 1 1 CD-ROM, SERVICE MANUAL (J/E) COLOR VIEWER 5600K 3 4 DY9-2002-000 CY4-6016-000 Y Y 1 1 COLOR BAR CHART CHART, 18% GRAY 5 DY9-2029-000 Y 1 FILTER, C-12 6 7 CY9-1543-000 CY9-1550-000 Y Y 1 1 FILTER, W-10 FILTER, FL-W 8 9 CY9-1552-000 CY9-1553-000 Y Y 1 1 FILTER, ND-2 FILTER, ND-4 10 CY9-1554-000 Y 1 FILTER, ND-8 REMARKS CHAPTER 5. DIAGRAMS CONTENTS 1. INTERCONNECTION DIAGRAM 2. BLOCK DIAGRAMS 2.1 OVERALL 2.2 MAIN PCB ASS’Y (1/4) 2.3 MAIN PCB ASS’Y (2/4) 2.4 MAIN PCB ASS’Y (3/4) 2.5 MAIN PCB ASS’Y (4/4) 2.6 DC/DC ONVERTER PCB ASS’Y 2.7 LCD PCB ASS’Y 2.8 Abbreviation in Block Diagrams 3. P.C.B. DIAGRAMS 3.1 MAIN PCB ASS’Y 3.2 DC/DC ONVERTER PCB ASS’Y 3.3 STJ PCB ASS’Y 3.4 HV MODULE UNIT 3.5 TOP MODULE UNIT 3.6 LCD PCB ASS’Y 3.7 OPTICAL FLX 3.8 EF FLX 3.9 R_EN FLX 3.10 CCD FLX 1. INTERCONNECTION DIAGRAM TOP FPC SW8 CF UNIT ACC SHOE FPC SW9 SW7 SW4 SW10 (MODE DIAL) SW3 SW1 SW6 SW2 CN2 B/W LCD PANEL 1 26 SW5 BUTTON BATTERY 15 30 1 16 25 50 CN1 Board to Board Board to Board RED BLK CN1 LCD PANEL MAIN PCB ASS'Y BACK LIGHT UNIT B25 CN804 B2 A15 A25 2 47 CN4 OPTICAL UNIT B15 OPT FPC A1 Battery Cover Open/Close Detect B1 A1 CN800 B20 B1 HV FPC CN4 SW13 1 2 1 CN805 A20 A1 46 CN802 8 CN600 1 4 20 CN803 1 LCD Rotation Detect SW (HINGE UNIT) CN3 1 CN1 8 24 1 6 CN806 12 1 CN401 20 1 CN402 CN2 1 1 1 8 CCD FPC 12 SW10 CN801 CF Cover Open/Close Detect SW 1 IG FPC CN2 8 MAIN/FLASH FPC 1 FLASH PIK DC/DC CONVERTER PCB ASS'Y LCD PCB ASS'Y 5 BLK 5 EF FPC 1 1 1 1 SW4 CN1 SW12 SW8 R-EN FPC SW2 1 2 DIGITAL 10 1 SW7 1 CN5 F12 SW1 2 12 CN4 BATTERY BOX 2 5 1 CN3 1 1 CN1 DC IN 9.5V CN3 CN2 2 MICROPHONE 40 3 STJ PCB ASS'Y 7 2 39 1 WHT CN5 CN1 1 CN5 SW6 BRN CN4 GRY J1 A/V OUT 1 2 CN2 SW5 SW9 SW2 SW1 F11 SW3 SPEAKER UNIT 01 JUNE, 2003 C CANON INC., 2003 CONNECTORS DC/DC CONVERTER PCB ASS’Y MAIN PCB ASS’Y CN4 A1 CN401 GND 1 A2 /CD2 A3 D10 A4 A5 A6 A7 CN800 CN801 PI_ZM_LED0 1 MATSW7 1 2 PI_ZM_RST0 2 MATCOM1 3 COMZ 3 MATSW8 /IOIS16 4 PI_ZM_LED1 4 D09 5 PI_ZM_RST1 5 D02 6 W_LEDK D08 7 A8 D01 A9 /STSCHG CN805 LCD_20V A1 2 LCD_12.3V 3 VDD0 MATCOM3 4 GND MATSW6 5 GND 6 MATSW1 6 W_LEDA 7 MATSW4 7 8 PI_FOC_RST 8 MATSW3 8 9 PI_FOC_LED 9 MATSW2 A10 D00 10 COMF 10 MATSW5 A11 GND 11 FOCA+ 11 A12 A00 12 FOCA- 12 A13 /CE1 13 FOCB+ A14 D15 14 FOCB- A15 D07 15 A16 D14 A17 D06 CF UNIT CN1 EF FLEX BOARD CN1 CN2 TOP FLEX LCD BOARD CN1 CN1 CN1 VBAT 1 VBAT 1 /REG 1 GND 1 EF_XGND 1 AFLED[01] 1 LCD_20V A2 VBAT 2 VBAT 2 A01 2 D03 2 AVEF 2 MATSW[8] 2 LCD_12.3V A3 DC_J_DET 3 DC_J_DET 3 /INPACK 3 D04 3 EF_STSP 3 MATSW[5] 3 VDD0 A4 H2CHG 4 H2CHG 4 A02 4 D05 4 EF_ID 4 MATSW[6] 4 GND A5 VDD0-3.3 5 VDD0-3.3 5 /WAIT 5 D06 5 EF_CCC 5 PWR_OFF 5 GND Serial_CLK A6 VDD0-3.3 6 VDD0-3.3 6 A03 6 D07 6 EF_X 6 Not connected 6 Serial_CLK Serial_D2I A7 GND 7 GND 7 RESET 7 /CE1 7 STRB_SW 7 MATCOM[1] 7 Serial_D2L CN5 8 LCD_CONT_CS ADDALAT LCD_CONT_CS A8 GND 8 GND 8 A04 8 A10 8 MATSW[1] CN802 A9 VDD2-15.3 9 VDD2-15.3 9 Not connected 9 /OE 1 MATCOM_1 9 MATSW[2] 1 BASE_P_DET A10 VDD2-5.5 10 VDD2-5.5 10 A05 10 A09 2 MARSW_6 10 MATSW[7] 1 ROT_ENC[0] 2 MATCOM4 A11 VDD2-5.5 11 VDD2-5.5 11 VCC(/CSEL) 11 A08 3 MATSW_5 11 MATSW[4] 2 P_DET02 ROT_ENC[1] 3 ROT_DET A12 GND 12 GND 12 A06 12 A07 4 ROT_ENC[0] 12 MATSW[3] 3 CSYNC 13 REMOTE 4 MATCOM4 A13 GND 13 GND 13 VCC 13 VCC 5 ROT_ENC[1] 13 PB_ON 4 GND 14 REG5.0V(by vbat) CN803 A14 BAT_SENSE 14 BAT_SENSE 14 VCC 14 A06 6 REMOTE 14 REC_ON 5 Y+S CCD-THM0 15 CFOPEN 1 ADDALAT(EX[23]) A15 GND 15 GND 15 IREQ 15 A05 7 REG5.0V(by vbat) 15 MATCOM[2] 6 GND 16 CCDTHM1 16 SLANT_OUT[0] 2 P_DET02 A16 /E0LAT 16 /E0LAT 16 A07 16 A04 8 CFOPEN 16 AFLED[21] 7 R-Y 17 ZMA+ 17 SLANT_OUT[1] 3 CSYNC A17 E12LAT 17 E1LAT 17 /WE 17 A03 9 GND 17 AFLED[22] 8 B-Y A18 D13 18 ZMB+ 18 SLANT_REF 4 GND A18 OSC(EF2STJ) 18 OSC 18 A08 18 A02 10 GND 18 PWR_LED01 A19 D05 19 ZMA- 19 VDD10-3.3 5 Y+S A19 IGBT(EF2STJ) 19 IGBT 19 /IOWR 19 A01 11 A_SLT_2 19 PWR_LED02 1 Not connected A20 D12 20 ZMB- 20 VDD10-3.3 6 GND A20 GND 20 GND 20 A09 20 A00 12 A_SLT_1 20 Not connected 2 RGT CN402 21 SLANT_EN 7 R-Y B1 VBAT 21 VBAT 21 /IORD 21 D00 13 B_SLT_1 21 Not connected 3 BLUE 8 B-Y B2 SENSE(STJ2EF) 22 SENSE 22 /OE 22 D01 14 B_SLT_2 22 OLC_VDD 4 RED CN804 B3 CHG 23 CHG 23 Not connected 23 D02 15 VDD10-3.3V 23 /OLC_RST 5 GREEN A21 D04 CN2 CN3 A22 D11 1 MECH_THM0 22 Vlitium A23 D03 2 MECH_THM1 23 GND A24 /CD1 3 IRISB+ 24 BATOPEN B1 AFLED01 B4 I_SENSE 24 I_SENSE 24 A10 24 /IOIS16 16 VDD10-3.3V 24 SCK 6 PSIG A25 GND 4 IRISA- 25 BAT_THRM B2 MATSW8 B5 VDD0-3.3 25 VDD0-3.3 25 /CE2 25 /CD2 17 GND 25 SDAT 7 HCK1 B1 /REG 5 IRISA+ 26 STROBO_STP B3 MATSW5 B6 GND 26 GND 26 GND 26 /CD1 18 GND 26 /OLC_CS 8 HCK2 B2 A01 6 IRISB- 27 Not Connected B4 MATSW6 B7 VDD12-1.5 27 VDD12-1.5 27 /CD2 27 D11 19 Vlitium 27 OLC_C/D 9 CEXT/REXT B3 /INPACK 7 ND+ 28 STRB_DET_SW B5 PWR_OFF B8 VDD12-1.5 28 VDD12-1.5 28 D10 28 D12 20 BATOPEN 28 GND 10 Not connected B4 A02 8 ND- 29 XTRIG B6 Not Connected B9 GND 29 GND 29 /IOIS16 29 D13 21 BATT_THRM 29 GND 11 REF B5 /WAIT 9 SHT+ 30 GND B7 MATCOM1 B10 Not Connected 30 Not connected 30 D09 30 D14 30 GND 12 HST B6 A03 10 SHT+ 31 GND B8 MATSW1 B11 Not Connected 31 Not connected 31 D02 31 D15 13 WIDE B7 RESET 11 SHT- 32 REG5.0V(E2) B9 MATSW2 B12 VDD2-N7.9 32 VDD2-7.9 32 D08 32 /CE2 B8 A04 12 SHT- 33 REG5.0V(E2) B10 MATSW7 B13 VDD3-12.3 33 VDD3-12.3 33 D01 33 Not connected B9 /VS2 HV FLEX BOARD STJ PCB ASS’Y CN1 CN2 14 VDD 15 VSSG CN600 34 CSEFO B11 MATSW4 B14 VDD3-20.0 34 VDD3-20 34 Not connected 34 /IORD 1 ROT_ENC[0] 1 MIC_IN 16 VDDG B10 A05 1 VOUT 35 EFAD B12 MATSW3 B15 GND 35 GND 35 D00 35 /IOWR 2 GND 2 MIC_GND 17 VSS B11 VCC 2 GND 36 CSEF1 B13 PB_ON B16 E2LAT 36 E2LAT 36 /SPKR(GND) 36 /WE 3 ROT_ENC[1] B12 A06 3 VDD 37 GND B14 REC_ON B17 E3LAT 37 E3LAT 37 A00 37 IREQ 4 GND 1 B13 VCC 4 RG 38 MOSI B15 MATCOM2 B18 GND 38 GND 38 /CE1 38 VCC 5 PONG_SW_COM 2 B14 VCC 5 H2B 39 MISO A1 AFLED21 B19 SP+ 39 SP+ 39 D15 39 VCC(/CSEL) 6 PONG_SW_SW B15 IREQ 6 H1B 40 DAC1 A2 AMLED22 B20 SP- 40 SP- 40 D07 40 Not connected B16 A07 7 GND 41 DAC2 A3 PWR_LED01 GND B17 /WE 8 SUB 42 /SPCR A4 PWR_LED02 1 MIC_GND 1 Vlitium B18 A08 9 CSUB 43 SDAC_VCC A5 OLC_BKLT[0] 2 MIC_IN 2 CN806 CN4 CN2 18 VDD V_IN 19 DWN GND 20 EN 21 VCK VST CN3 1 GND 22 2 V_IN 23 COM 24 Not connected 41 D14 41 RESET 1 ACADPT_IN 42 D06 42 /WAIT 2 GND 43 D13 43 /INPACK 1 VBUS D- CN2 CN4 B19 /IOWR 10 VL 44 OSC A6 OLC_BKLT[1] 3 AUDIO_GND CN3 44 D05 44 /REG 2 B20 A09 11 H1A 45 BCLK A7 OLC_VDD 4 Line_out 1 BATT_IN 45 D12 45 GND(/SPKR) 3 D+ B21 /IORD 12 H2A 46 SCLK A8 /OLC_RST 5 Video_GND 2 GND 46 D04 46 Not connected 4 GND B22 /OE 13 V1 47 SENSE A9 OLC_SCK 6 Video_OUT 47 D11 47 D08 5 AV_J_DET B23 /VS1 14 V2 A10 OLC_SDAT 7 Not Connected 1 GMD 48 D03 48 D09 6 Not connected B24 A10 15 V3A A11 /OLC_CS 8 AV_J_DET 2 OSC 49 /CD1 49 D10 7 VIDEO_OUT B25 /CE2 16 V3B A12 OLC_C/D 9 GND 3 SENSE 50 GND 50 GND 8 Video_GND 17 V4 A13 GND 10 D+ 4 VBAT 9 LINE_OUT 18 V5A A14 GND 11 D- 5 IGBT 10 AUDIO_GND 19 V5B A15 GND 12 VBUS 11 MIC_IN 20 V6 1 SP+ 12 MIC_GND 2 SP1 V_BUS 2 D- 01 JUNE, 2003 CN4 CN5 CN5 3 D+ 4 Not connected 5 UV_GND C CANON INC., 2003 2. BLOCK DIAGRAMS 2.1 OVERALL DATA COMMUNICATION ANALOG IMAGE SIGNAL ANALOG AUDIO SIGNAL BUTTON BATTERY BAT OPEN CF OPEN R-EN FPC HV FPC A-SLANT DET OPTICAL UNIT MAIN PCB ASS'Y TH1 B-SLANT DET LCD BASE POSITION DETECT SW CCD FPC REMOTE VDD2-15 T.G. VDD2-N7.9 LCD ROTATION DETECT SW CCD SENSOR LCD PCB ASS'Y OPT FPC KEY Sens ROTARY ENCODER Vcc TH1 AF Support LIGHT EMITTER LCD CONTROL ADC LCD PANEL M Zoom MOTOR KEY EF FPC ACC. SHOE FPC EF IC MOTOR DRIVER VBAT CPU M Focus MOTOR BATTERY LOAD TEST SW Digital Signal Processing IC M Iris MOTOR M ND MOTOR VDD0-3.3 BACK LIGHT UNIT M Shutier MOTOR TH1 ACC. SHOE DAC VDD0-3.3 OLC DRIVE RESET VDD3-20 REG 5V(BAT) DIAL/ KEY FLASH MEMORY AUDIO Amp. USB VDD3-12.3 RTC REG5V VDD0-3.3 COMP. VIDEO +3.0V REG SHT FPC TOP MODULE UNIT OLC VIDEO SD RAM FINDER LED VDD MIC IN VDD2-1 5 VDD2-N7.5 REG VDD2-15.3 VDD2-N7.9 OSC VDD12-1.5 VIDEO Amp. REG5V +5V REG REG5V(BAT) +5V REG CF UNIT VDDC VBAT CF CARD VBAT VDD0-3.3 STJ PCB ASS'Y VDD0-3.3 VBAT VBAT USB CN5 REG SPEAKER UNIT VDD0-3.3 MIC DC/DC CONVERTER AV OUT HV/OSC/XE_DRIVE DC IN (9.5V) 01 JUNE, 2003 BATTERY BOX UNIT VDD2-5.5 VDD2-15.3 VDD2-N7.5 VDD3-12.3 VDD3-20 VDD12-1.5 CHARGE CONTROL CN2 DC/DC CONVERTER PCB ASS'Y C CANON INC., 2003 2.2 MAIN PCB ASS’Y (1/4) DATA COMMUNICATION ANALOG IMAGE SIGNAL ANALOG AUDIO SIGNAL IC107 Digital Signal Processing IC (1/2) T8F80XB-0002 MAIN PCB ASS'Y (1/4) IC108 VPVD, APVD[0]-[2] OPTICAL UNIT (1/2) Q600 BUFFER 2SC3938 CCD FPC IC1 CCD SENSOR +15V IC600 CDS,AD HD49338F C609 VOUT V1 V2 V3A V3B V4 V5A V5B V6 SUB CSUB H1-1 H1-2 H2-1 H2-2 RG VDD VL 11 1 2 3 4 5 6 7 8 16 17 19 15 20 14 13 12 18 1 13 14 15 16 17 18 19 20 8 9 11 6 12 5 4 3 10 CN600 VOUT V1 V2 V3A V3B V4 V5A V5B V6 SUB CSUB H1A H1B H2A H2B RG VDD VL 30 C630 43 39 44 46 38 40 42 47 48 C637 10 12 C624 8 41 45 Q601 VSUB CONT PDTC144EE V1 V2 V3A V3B V4 V5A V5B V6 SUB H1A H1B H2A H2B RG VH VL VDD2,3 D0 ı D11 CKI OSCO OSCI XSHP XSHD PBLK ADCLK MCKO VR HR SSI SCK SEN VDD1,4,5 CCD[0] ı CCD[11] 12 27 AOUTP[0] 30 AOUTP[1] X600 45MHz 21 22 19 16 AOUTP[2] SPBLK SPSIG PBLK ADCLK HD VD CLOBP CCD_CLK CCD_CLK CLOBP 34 17 OBP VD HD 35 31 SSG_SDATA 32 SSG_SCLK TG.CS 33 47 48 CDSAD_CS 46 SDATA SCK CS LCD_BY/COMP Y+S R-Y B-Y Q106 2SC4617 TO LCD PCB ASS'Y Q107 2SC4617 LCD_RY SSGOUT[0] SSGOUT[1] SSGOUT[5] CCD_CLK EX[23] P4[2] P4[6] AVDD1-2, DVDD1,6, DRDVDD EX[9] EX[10] EX[53] P2[7] 5 +5V REG TAR5S33 FROM DC/DC CONVERTER PCB ASS'Y A14 A1 A2 B1 A5 A6 B5 B7 B8 A10 A11 5 BAT_SENSE TG, CDS_AD X101 27MHz Serial_1 4 IC100 MAIN POWER SW BD6520F 1,2 VDD0-3.3 VDD12-1.5 VDD2N7.5 VDD2-15 6-8 3 1 VDD1_EI0 B12 VDD2-N7.9 A9 VDD2-15.3 E2LAT E3LAT VDD3-12.3 VDD3-20 SENSE OSC IGBT B19 SP+ B20 SP- L103 VDD12-1.5 VCPU AD_VCC VDDC-0 ı VDDC-5 VDD1_ECORE 4 2 E3LAT IC808 E2LAT E3LAT VBAT CN801 Serial_D2L Serial_CLK 7 6 LCD_CONT_CS 8 7 TO LCD PCB ASS'Y 5 1 +5V REG TK11150CS E2LAT 4 P3[2] P3[1] P3[0] P2[0] P2[2] P2[3] P2[4] P2[5] P2[6] P3[3] P3[4] P3[5] P4[4] P4[7] SCCLK LCD_20V LCD_12.3V VDD0 1 2 3 CN802 BASE_P_DET MATCOM4 ROT_DET MATCOM4 1 2 3 4 P2,P3,P4 EX[40] EX[41] EX[19] LCD BASE POSITION DETECT LCD ROTATION DETECT VDD3-12.3 5 a b 3 c VDD3-20 3 IC809(2/2) INV TC7W04FU A 3 SP VIDEO 4 VCC IC812 VIDEO AMP NJM2574RB1 01 JUNE, 2003 VDD_SDO-0 ı VDD_SDO-5 VDD_DSCI VDD1_DRAM EX[20] L101 L100 IC650 VDD3-0 ı VDD3-10 L102 VDD10-3.3 VDD2-5.5 VDD2-5.5 2 LCD VDD3-20 VDD3-12.3 VDD0-3.3 P4_5 VDD0-3.3 L104 VDD12-1.5 1 3 VXOUT AD_VDET V BAT REG B16 B17 B13 B14 B2 A18 A19 +3.3V REG TAR5S33 ADDALAT CSYNC P_DET 02 VXIN 4 IC603 CN805 (1/2) 5 7 8 4 IC602 BAT_SENSE VDD1_EI0 CN803 Q105 2SC4617 LCD YS +15V V BAT 5 Q105-Q107 : BUFFER AD[0] ı AD[11] 26 28 18 19 20 23 +2.5V REG TK11125CS 1.5VDC VREF[0]-[2] CDSIN IC601 TG CXD3619R 4 5 Q800 BUFFER 2PA1774 C CANON INC., 2003 2.3 MAIN PCB ASS’Y (2/4) DATA COMMUNICATION ANALOG IMAGE SIGNAL ANALOG AUDIO SIGNAL IC7 COMPARATOR NJM12903R 4 2 MATSW_5 SW8 Macro MATSW_6 SW6 Remocon SW7 Strobo MATSW_7 MATSW_8 OLC VDD AFLED[21] AFLED[22] AE_LOCK MF FOCUS SW1 SET MENU DISP WR SW12 SW4 SW7 SW6 SW8 SW5 SW9 SW3 SW2 EX[16] EX[18] EX[40] EX[41] EX[42] EX[43] EX[44] EX[45] EX[46] EX[47] EX[43] 6 IC811 BUFFER TC7WH126FU 5 2 2 4 3 4 EX[28] EX[29] EX[30] 2 6 6 1 4 2 EX[23] EX[41] Q109 INV XP6213 P2[4] 3 5 1 VDD0-3.3 Q113 SW PDTA114EE EX[19] EX[40] 8 LCD P2[3] 7 Q110 INV XP6213 EX[23] EX[53] EX[28] EX[29] EX[30] EX[23] 3 AIN[5] AIN[1] VCPU P2[6] 3 P2[2] D+ D- 10 11 VBUS 12 TO STJ PCB ASS'Y Q103 SW XP03312 USB_PWON 2 EX7 1 X100 24MHz VCPU 1 IC105 P2,P3,P4 2 1 RESET S-80927CNMC-G8X EX[9] VDD VCPU SSG_SDATA 6 SSG_SCLK Serial 1 2 RTC PWR_LED01 3 5 P3[3] 11 8 4 2 1 6 4 EX[20] EX[10] 5 LINE_OUT MIC-IN MIC_GND VIDEO_OUT 1 IC104 CPU (1/2) UPD82518F1-021-EN6 EX20 CN806 AV_J_DET VCPU 2 EX[9] EX[10] EX[17] EX[18] EX[19] EX[40]-[47] PONG Serial 0 D_P D_N USB_VBUS EX[16] ROTARY ENCODER 1 VIDEO Q104 SW XP03312 Q111 INV PDTC114EE P2[5] 1 3 5 6 7 P4[7] EX[9] EX[10] B BATTERY COVER OPEN DET. SW EX[19] DA[3] P2[0] EX[34] EX[35] EX[26] EX[27] ADIN[1] EX[48] ADIN[5] P3[5] +5V REG TKIII50CS IC801 +5V REG TKIII50CS IC805 EX[63] CN2 ROT_ENC[0] ROT_ENC[1] PONG_SW_COM PONG_SW_SW BUTTON BATTERY 2 1 CF LID OPEN DET. SW SW13 24 15 25 22 11 12 SLANT_OUT[0] 16 SLANT_OUT[1] 17 SLANT_REF 18 SLANT_EN 21 VDD10-3.3V 19 VDD10-3.3V 20 39 34 36 MISO CSEF0 CSEF1 SW10 BATOPEN CFOPEN BAT_THRM V-litium ROT_ENC[0] ROT_ENC[1] 46 38 SCLK MOSI 6 9 8 7 10 5 1 3 42 47 44 45 /SPCR SENSE OSC BCLK MATSW1 MATSW2 MATSW3 MATSW4 MATSW5 MATSW6 MATSW7 MATSW8 29 STRB_DET_SW 28 XTRIG EX[49] EX[50] B DA,DACD1 13 2 1 THERMISTOR R-EN FPC 4 EX[40] EX[41] EX[42] EX[43] EX[44] EX[45] EX[46] EX[47] V-litium GND 13 LED1 SML521 PWR_LED02 CN4 NF100 OLC VDD Q114 SW PDTC114TE 5 REMOTE TH1 AUDIO EX[16] EX[17] AFLED[01] LED3 SML310 5 VBAT 1 CLK32KIN EX54 EX58 EX59 CS2 LIVDD SW9 Sokkyo 17 18 19 5 13 14 22 5 7 RU1 REMOTE CONTROL RS-181 2 3 B-SLANT DET VDD0-3.3 3 IC103 RTC4574JE 7 IC111 BUFFER TC7WH126FK FOUT CE0 DATA CLK CE1 Relase MATSW_4 1 IC803 SW TC7W66FU 2 3 7 6 8 SW1 Zoom- 1 HV FPC A-SLANT DET 14 B-SLT-2 VDD10-3.3V 15 VDD10-3.3V 16 REG5.0V(BAT) 7 6 REMOTE BATT_THRM 21 Vlitium 19 CF_ OPEN 8 ROT_ENC[0] 4 ROT_ENC[1] 5 1 MATCOM1 3 MATSW5 MATSW6 2 BATOPEN 20 4 RESETB MATSW_3 3 VDD 2 IRESET SW2 Zoom+ B8 MATSW1 B9 MATSW2 B12 MATSW3 B11 MATSW4 B3 MATSW5 B4 MATSW6 B10 MATSW7 B2 MATSW8 B1 AFLED01 A1 AFLED21 A2 AFLED22 A3 PWR_LED01 A4 PWR_LED02 B5 PWR_OFF B13 PB_ON B14 REC_ON A7 OLC_VDD A 13 OSC1-X2 MATSW_2 8 9 12 11 3 4 10 2 1 16 1 12 11 13 VDD10-3.3 4 20 OSC1-X1 MATSW_1 MATSW[1] MATSW[2] MATSW[3] MATSW[4] MATSW[5] MATSW[6] MATSW[7] MATSW[8] AFLED[01] AFLED[21] AFLED[22] PWR_LED01 PWR_LED02 PWR_OFF PB_ON REC_ON OLC_VDD 2 3 VCC 18 17 TC74VHCT245AFT 15 16 6 3 G1 G2 OLC_VDD 7 VDD1-22 Upper Dial B7 MATCOM1 B15 MATCOM2 6 CN5 A-SLT-1 A-SLT-2 B-SLT-1 5 6 REG 5.0V (E2) EX[39] EX[11] EX[38] EX[24] EX[49] EX[50] EX[63] EX[48] EX[26] EX[27] EX[34] EX[35] MATCOM[1] 7 MATCOM[2] 15 7 3 IC806 3.3/5V BUFFER 14 VDAC Q108 INV PDTC144E OLC VDD REG5.0V 5 1 3 2 1 3 G 12 11 DACD[0] VDD 7 2 EX[5] EX[9] EX[10] EX[39] 5 4 EX[9] EX[10] A9 OLC_SCK A10 OLC_SDAT A11 /OLC_CS A12 OLC_C/D A8 /OLC_RST 6 9 SCCLK SDAT /OLC_CS OLC_C/D OLC_RST 24 25 26 27 23 19 CLK Q 5 CLR 6 8 c a b CN804 CN1 SCK 5 25 E1,E2 DIR P3[4] 8 9 10 11 16 1 P4[4] SEG0 SCK ı SD SEG3 CS SEG0 ı C/D SEG31 RESET CN800 SDAC-VCC DAC2 DAC1 43 41 40 17 ı 20 25 28 ı 48 EFAD IC1 EF LC4090L DA[12] DA[11] OLC 1 NSPCR 4 2 6 VDD2-EF5.0 IC810 FF TC7W74FK 7 6 11 STORBO_STP 26 7 7SH32 19 MISO 18 CSEF0 17 CSEF1 CCC EFID STSP AVEF SYNC 4 SENSE 10 OSC 12 BCLK 2 5 6 3 EX[24] COM0 ı COM3 SEG0 ı SEG3 SEG0 ı SEG31 IC809(1/2) INV TC74W04FU 1 12 ı 15 COM0 ı 4 COM3 REG5.0V Q1 BUFFER XP4601 28 DAC1 DAC2 27 1 Q3 XP6501 MATCOM_1 2 MATCOM_3 4 REMOTE 13 13 9 14 SCLK 16 MOSI 7 VDD2-EF5.0 IC1 OLC DRIVER BU9728AKV 4 IC4 OR 2 4 1 3 2 CN1 EF_XGND STRB_SW EF_CCC EF_ID EF_STOP AVEF EF_X Q4 SW 2SC3631 TOP MODULE UNIT IC6(2/2) 12 14 32 33 14 35 10 IC6(1/2) 8 5 6 ACC. SHOE REG 5.0V REG 5.0V REG 5V EFAD ACC. SHOE FPC 1 7 5 4 3 2 6 5 3 EX[42] EF FPC Q2 XP6501 IC6 AMP BA10324AFVP REG5.0V 1 VCPU MAIN PCB ASS'Y (2/4) LED2 SML521 SW10 SW4 SW3 01 JUNE, 2003 PWR_OFF PWR_ON REC_ON C CANON INC., 2003 2.4 MAIN PCB ASS’Y (3/4) DATA COMMUNICATION ANALOG AUDIO SIGNAL MAIN PCB ASS'Y (3/4) DA,DACD1 4 VBAT 5 +3.3V REG 4 TK11133CS 14 13 EX[23] 1 DA[6] DA[7] DA[8] DA[9] DA[10] EX[9] EX[10] EX[12] Serial_0 VCC VDD A6 A7 A8 A9 A10 20 19 22 SI CLK /EN A1 A2 A3 A5 A11 A12 IC104 CPU (2/3) UPD82518F1-021-EN6 DA[1] DA[2] DA[3] DA[5] DA[11] DA[12] 1 2 3 5 11 12 C814 C818 SP TO DC/DC CONVERTER PCB ASS'Y EX[23] EX[12] IC807 AUDIO Amp. AN12905A A1-A21 A1 ı A21 21 D0 ı D15 16 A0 ı A20 VDD0_3.3 IC102 BUFFER TC755W51FK 8 C834 3 1 7 5 AIN0 D0-D15 AD_VCC 5 4 +3.0V REG TK11130CS 1 BAT_SENSE EX[23] Q102 SW XP4312 4 3 2 c d e f g INTP1 WAITB CSENGB UBEB ALE EX6 ECLK ESDT ESREQ INTP2 EX31 AIN2 VDDI_DRAM i j k INTP2 CD 2 TG.CDS,AD Q101 XP03311 10 a b c d e f g h i j k 2 CPUADR_0 ı CPUADR_3 CPUAD_0 ı CPUAD_15 1 CPURDWR CPUMEMIO INTR NWAIT NCSE UBEB ALE NRESET BUSCLK ESDT ESREQ UDZS 2.0B A0 ı A11 12 2 SDADR_0 ı SDADR_11 SDBS_0 SDBS_1 CKE SDWE SDCAS SDRAS SDCKE_0 CLK SDCLK DQ0 ı DQ31 32 SDDT_0 ı SDDT_31 SDM0 ı SDM3 4 SDDQM_0 ı SDDQM_3 /CS 4 3 A16-A19 4 VDD1-3, VCCQ1-10 /CS 16 BATTERY LOAD TEST 11 D0-D15 Q100 2SD1664 EX14 EX8 INTP0 IC107 Digital Signal Processing IC (2/2) T8F80XB-0002 /WE /CAS /RAS 1 VBAT CF UNIT BA0 BA1 h TG_CS EX51 TGSAD_CS EX52 EX13 VDD1_EI0 IC109 SDRAM IC110 SDRAM K4S283233F-MN1L AVDD AVREF AVERFP AIN5-7 VCC C5 /WE H2 /CE J2 /OE D5 /RESET b MRDB EX22 SP+ SP– DQ0 ı DQ15 a MWRB CSMEMB AOUT IC101 SDCS_0 SDCS_1 CN4 0 1 2 0 1 2 PCADR_0 PCADR_1 PCADR_2 P1_0 ı P1_7 A00 A01 A02 A03 CFAD_0 -10 8 A10 D00 PCDT_0 ı PCDT_15 16 CFDT_0-15 INTP2 D15 NPCRD NPCWR PCCE 1 PCCE 2 PCRDY PCIRQ PCIOIS P0_5 P0_1 P4U_0 P0_0 P0_4 /IORD /IOWR /CE1 /CE2 /WAIT IREQ /IOIS16 /WE RESET /INPACK /REG /OE /CD1 /CD2 CD VCC VDDIO-3.3 L105 01 JUNE, 2003 A3 A4 A16 A17 B3 B4 IC106 FLASH MEMORY MBM29LV320BE90PBT EVR_CTL 43 STBY VCC_SP SP_PWRS LINE_MUTE 38 MIC_PWRS VCC 35 MIC_BIAS 34 MIC_IN 19 REC_O 42 LINE_OUT 17 PB_AMP_I 41 LMUTE_TR 1 3 DC_J_DET H2CHG /E0LAT /E12LAT CHG I_SENSE DACD[0] DACD[1] DACD[2] DACD[3] 18 D0 17 D1 16 D2 15 D3 16 AUDIO 2 12 22 44 32 33 CN805(2/2) EX[25] EX[57] EX[3] EX[21] EX[15] ADIN[4] EX[25] EX[57] EX[3] EX[21] EX[15] ADIN[4] 2 DA[6] DA[7] DA[8] DA[9] DA[10] VDD0-3.3 Q801 INV PDTC114TE 4 IC804 DA,DACD 6 IC802 DAC M62376GP CN1 A12 B2 B4 37 2 4 B6 B8 B10 8 B12 B16 B18 B20 B24 A10 A8 A6 A23 A21 A19 A17 A15 16 A7 A5 A3 A22 A20 A18 A16 A14 6 8 10 12 16 18 20 24 35 33 31 48 46 44 42 40 32 30 28 47 45 43 41 39 B21 21 B19 A13 B25 B5 B15 A4 B17 B7 B3 B1 B22 A24 A2 B13 B14 19 38 25 5 15 29 17 7 3 1 22 49 27 13 14 CN2 A00 20 14 12 11 A10 D00 10 8 21 23 2 6 47 49 27 16 14 D15 31 /IORD /IOWR /CE1 /CE2 /WAIT IREQ /IOIS16 /WE RESET /INPACK /REG /OE /CD1 /CD2 34 35 7 32 42 37 24 36 VCC CF CARD 41 43 44 9 26 25 13 38 C CANON INC., 2003 2.5 MAIN PCB ASS’Y (4/4) DATA COMMUNICATION MAIN PCB ASS'Y (4/4) DACD[1] DA, DACD VDD0-3.3 Q402 MECH PI POWER SAVE XPO3390 2 3 6 IC401 COMPARATOR NJM12903R IC104 CPU(3/3) UPD82518F-021-EN6 VDD EX[0] EX[1] 1 ZOOM1 1 3 2 ZPI0 ZOOM2 7 5 6 ZPI1 OPTICAL UNIT (2/2) IC403 INVERTER TC7W04FK DA[2] DA[5] EX[32] EX[33] EX[61] 1 7 3 5 VCC 8 ZM_CTLR1 ZM_CTLR2 ZM_PWM REDCONT 17 2 18 1 AIN2 BIN2 AIN1 BIN1 APWM BPWM BSTBY ASTBY VM FU403 22 6 5 3 2 1 4 Q404 PWM SW XP4312 ADIN[3] ADIN[6] ADIN[7] FU402 EX[60] EX[55] EX[56] EX[62] DACD[2] MECH_CS MECH_CLK MECH_DATA DA[1] ZPI1 VBAT 13 AO1 11 AO2 5 BO1 BO2 8 ZM1 ZM2 ZM3 ZM4 IC402 Focus, Iris, ND, Shutter MOTOR DRIVE BD8753KV VM2-1,2 VCC VM3,4 VM1-1,2 VBAT EX[38] EX[36] EX[37] VCC ZPI0 ADIN[3] ZM1 ZM2 ZM3 ZM4 ADIN[6] L402 VDD0-3.3 EX[60] EX[55] EX[56] EX[62] Q401 2SC4617 IC404 Zoom MOTOR DRIVE TB6552FL 16 3 4 15 DACD[3] FU401 2 3 10 11 1 28 31 32 33 35 PWM1 PWM2 PWM3 PWM4 PWM6 PS STROBE CLK DATA VLIM6 43 OUT1A 41 OUT1B 48 OUT2A 46 OUT2B FOC1 FOC2 FOC3 FOC4 13 OUT3A 15 OUT3B 18 OUT4A 20 OUT4B IRIS1 IRIS2 IRIS3 IRIS4 21 OUT5A 24 OUT5B ND1 ND2 40 OUT6A 37 OUT6B SHT1 SHT2 FOC1 FOC2 FOC3 FOC4 IRIS1 IRIS3 IRIS4 IRIS2 ND1 ND2 SHT1 SHT2 ADIN[7] 01 JUNE, 2003 4 CN401 PI_ZM_LED0 1 PI_ZM_RST0 2 COMZ 3 PI_ZM_LED1 4 PI_ZM_RST1 5 6 W_LEDK W_LEDA 7 PI_FOC_RST 8 PI_FOC_LED 9 COMF 10 ZMA+ 17 ZMB+ 18 ZMA19 ZMB20 OPT FPC Zoom PI LED1 AF LED AF PI Zoom MOTOR TH1 CCD THERMISTER CCD_THMO CCD_THMO FOCA+ FOCAFOCB+ FOCB- 15 16 11 12 13 14 CN402 3 IRISB+ 4 IRISAIRISA+ 5 IRISB6 7 ND+ 8 NDSHT+ 9 SHT+ 10 SHT11 SHT12 MECH_THMO 1 MECH_THM1 2 Focus MOTOR SHT FPC Iris MOTOR ND MOTOR Shutter MOTOR TH1 MECH THERMISTER C CANON INC., 2003 2.6 DC/DC CONVERTER PCB ASS’Y DATA COMMUNICATION ANALOG IMAGE SIGNAL ANALOG AUDIO SIGNAL DC/DC CONVERTER PCB ASS'Y BATTERY BOX UNIT F12 IC14 REG S-817B33AMC VBAT D14 2 CN3 2 1 2 BATT_IN GND 1 C23 Q19 (2/2) DC_J_DET 1 2 Q14 PWM SW F11 ACADPT_IN GND Q59 RSNS CHARGE SW L11 D12 D15 T51 Q19,Q20Q22 TRICLE CHARGE D61 Q19(1/2) V_SENSE SW VIN IC15 R1223N332H Q18 V_SENSE SW EXT 4 3 IC51 AN8049S SW REG CONTROL VCC T52 6 5 VDD DRIVE I_SENSE IC13 M62211FP CHARGE CONTROL V_SENSE 2 3 1 I_SENSE 7 Q11(1/2) I_SENSE 4 6 6 2 Q51 SW 5 3 VREF IC11(2/2) TA74W01FU I_SENSE 1 9 Q14 SW 5 CTL1 IN-1 OUT2 CTL2 IN-2 OUT3 1 8 IN-3 OFF D50 D57 +12.3V Q56 PWM SW 13 21 15 18 2 Q58 PWM SW L51 5 VREF 8 E1LAT E3LAT E2LAT DC_J_DET 1 9 H2CHG Q57 SW DRIVE VREF 9 VDD2-N7.9 10 11 32 VDD3-20 VDD3-12.3 34 33 VDD12-1.5 27 28 E2LAT E3LAT 36 37 SPSP+ 40 39 IGBT OSC SENSE 19 18 22 E1LAT DC_J_DET 17 3 H2CHG /E0LAT CHG I_SENSE 4 16 23 24 TO MAIN PCB ASS'Y +1.5V 3 Q15 BUFFER VDD2-15.3 +20V 16 23 5 6 25 VDD2-5.5 D59 SW REG CONTROL Q17 CHG OFF +5.5V -7.9V Q23 /EOLAT SW 1 OUT1 12 10 +15.3V Q55 PWM SW /EOLAT D60 D58 D55 VOUT Q11 C25 VDD0-3.3 F13 +3.3V Q20 CE Q13 L12 5 C18, C26 Q12 SW DRIVE Q11,Q13 SW D16 3 1 Q24 PWM SW Q22 CN2 VIN VOUT GND CN1 BAT_SENSE 14 1 2 VBAT 21 CHG CN5 1 2 SPEAKER UNIT 1 2 SP+ SP- STJ PCB ASS'Y CN3 3 V IN GND CN2 2 V IN 1 GND 2 1 DC_IN (9.5V) CN4 L1 D105 Q102 POWER SW D103 T101 C105 VBAT SENSE OSC IGBT VBAT Q103 OSC T102 AVOUT 4 3 2 5 44 Q105 CURRENT LIMIT VIDEO_OUT OSC AUDIO_OUT Q101 POWER SW DRIVE AV_J_DET J1 SENSE IGBT 3 CN1 1 2 MIC 01 JUNE, 2003 MIC_IN MIC_GND Q104 XE DRIVE 3 CN4 1 VBUS 2 DD+ 3 AV_V_JET 5 VIDEO_OUT 7 9 LINE_OUT 11 MIC_IN MIC_GND 12 CN5 3 D+ 2 DVBUS 1 FROM MAIN PCB ASS'Y USB C CANON INC., 2003 2.7 LCD PCB ASS’Y DATA COMMUNICATION ANALOG IMAGE SIGNAL LCD PCB ASS'Y IC3 LCD CONTROL CXA3572AR Q3,Q4,Q7 : 2PA1774 C11 FROM MAIN PCB ASS'Y 5 CN2 Y+S 7 R-Y 8 B-Y 22 Q3 C12 23 C13 24 Q9 4 Q7 4 G/Y R/R-Y B/B-Y 6 IC1 +3.0V REG TK11130CS 2 1 3 PDET02 ADDALAT CSYNC 5 VIN VOUT 4 CONT 1 VCC1 VDD1,2 25 CN1 7 Serial_D2L 6 Serial_CLK 8 LCD_CONT_CS 33 32 31 Q1 LCD V DET. XP6210 6 FROM MAIN PCB ASS'Y 5 SYNC_IN SDAT SCK SEN 4 3 1 2 IC7 +12V REG NJM2370U12 2 3 1 LCD_12.3V VDD0 5 VIN VOUT VST VCK EN DWN WIDE HST HCK1 HCK2 RGT PSIGOUT 4 12 CN3 10 ROUT 12 GOUT 8 BOUT 6 COM 27 REF VCC2 DAOUT 3 2 1 47 46 44 42 43 40 14 RED GREEN BLUE COM REF 4 5 3 23 11 VST VCK EN DWN WIDE HST HCK1 HCK2 RGT 22 21 20 19 13 12 7 8 2 PSIG 6 VDD 14 18 VDDG 16 LCD PANEL 26 LCD_20V ZD2 BACKLIGHT UNIT Q2 LCD BRIGHT CONT 2PC4617 01 JUNE, 2003 C CANON INC., 2003 2.8 Abbreviation in Block Diagrams Abbreviation Nominal name ADC Analog-to-Digital (A/D) Converter AE Automatic Exposure control AF Automatic Focussing control AND Logic AND circuit R-Y/B-Y Description Color difference signals of TV system BPF Band-Pass Filter BUFFER Buffer circuit C Chrominance signal Color component signal of TV system CCD Charge-Coupled Device CCD imager CDS Correlated Double Sampling system COMP.VIDEO Composite video signal COMPARATOR Voltage comparator CPU Central Processing Unit DAC Digital-to-Analog (D/A) Converter DRAM Dynamic Random Access Memory Memory with which read and write are freely possible. DSP Digital Signal Processing Typically DSP device EEPROM Electrically Erasable PROM PROM that is electrically erasable. EVF Electronic View Finder FET Field Effect Transistor FLASH MEMORY Non-volatile memory with which write and read are freely possible. HPF High-Pass Filter I/F InterFace The circuit that interconnects 2 devices or circuits. IGBT Insulated Gate Bipolar Transistor Conductivity-modulation type FET transistor INV. Logic Inverter circuit IR InfraRed ray IRIS Iris LCD Liquid Crystal Device Typically LCD display LED Light Emitting Diode Typically LED display LPF Low-Pass Filter NTSC National Television System Committees OP Amp OPerational Amplifier OR Logic OR circuit OSC OSCillator PAL Phase Alternating by Line PLL Phase Locked Loop PROM Programmable Read Only Memory PWM Pulse Width Modulation REG. REGulated power supply NTSC color TV system developed in USA PAL color TV system developed in Germany Non-volatile memory in which program can be written. RTC Real Time Clock Reference clock oscillator SDRAM Synchronous Dynamic RAM DRAM whose bus interface is synchronous. SECAM SEquential Colour À Mémoire SECAM color TV system developed in France SW REG SWitching REGulator Switching type regulated power supply device TG Timing Generator USB Universal Serial Bus VCO Voltage Controlled Oscillator VCXO Voltage Controlled X’tal Oscillator XE Xenon Tube Y Y-signal USB type serial data communication system Luminance component signal of TV system 3. P.C.B. DIAGRAMS 3.1 MAIN PCB ASS’Y MAIN PCB ASS’Y (SOLDERING SIDE) 01 JUNE, 2003 MAIN PCB ASS’Y (COMPONENT SIDE) C CANON INC., 2003 3.2 DC/DC CONVERTER PCB ASS’Y DC/DC CONVERTER PCB ASS’Y (SOLDERING SIDE) 01 JUNE, 2003 DC/DC CONVERTER PCB ASS’Y (COMPONENT SIDE) C CANON INC., 2003 3.3 STJ PCB ASS’Y STJ PCB ASS’Y (SOLDERING SIDE) STJ PCB ASS’Y (COMPONENT SIDE) 129 NF3 01 JUNE, 2003 C CANON INC., 2003 3.4 HV MODULE UNIT 01 JUNE, 2003 C CANON INC., 2003 3.5 TOP MODULE UNIT 01 JUNE, 2003 C CANON INC., 2003 3.6 LCD PCB ASS’Y 01 JUNE, 2003 C CANON INC., 2003 3.7 OPTICAL FLX 01 JUNE, 2003 C CANON INC., 2003 3.8 EF FLX 01 JUNE, 2003 C CANON INC., 2003 3.9 R_EN FLX 01 JUNE, 2003 C CANON INC., 2003 3.10 CCD FLX 01 JUNE, 2003 C CANON INC., 2003 How to print out the Auto Focus Chart < Procedures > 1. Click “ Print” of the Menu Bar. 2. Remove clicking from “Shrink oversized pages to paper size” and “Expand small pages to paper size”, and then print on A4 or legal. (A3 can be used.) < Auto Focus Chart (1) > < Auto Focus Chart (2) > PowerShot G5 Auto Focus Chart (1) PowerShot G5 Auto Focus Chart (1) AF Chart Dimensions (1) Dimensions (1) 65mm 88mm PowerShot G5 Auto Focus Chart (2) PowerShot G5 Auto Focus Chart (2) AF Chart Dimensions (2) 170mm 228.5mm