Download USB2-Mini User Manual

Technical Specifications
ELECTRICAL
Range over
Cat5e/6
© Copyright 2014 SmartAVI, All Rights Reserved
Notice
150 ft.
USB DATA
USB Fixed
Data Rate
480Mbps
USB Version
Compatibility
2.0 and 1.1
USB Connector
Type (TX)
(1) Type B
USB Connector
Type (TX)
(4) Type A
UTP DATA
Signal Type
LVDS
Connector
Unshielded RJ-45
The information contained in this document is
subject to change without notice. SmartAVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and fitness for any particular purpose.
User Manual
SmartAVI will not be liable for errors contained
herein or for incidental or consequential damages in
connection with the furnishing, performance or use of
this material.
No part of this document may be photocopied,
reproduced or translated into another language
without prior written consent from SmartAVI.
USB2-Mini
POWER
External or via USB
5V DC @ 2mA
Connector
2.1mm DC jack
(center+ve)
PHYSICAL
Dimensions
3.375” x 3.375” x 1.5”
Weight
0.14lb
The USB2-Mini extends USB 2.0 up to 150 ft. from
the computer using a single Cat5e/6 Cable
11651 Vanowen St.
North Hollywood, California 91605
Phone: (818) 503-6200
Fax: (818) 574-5581
www.smartavi.com
Introduction
Introduction
The USB-100
extends USB up to 275ft using a single
SmartAVI’s
standard
USB
unshielded
CAT5USB2-Mini
cable with extends
data rates
up to 12Mbps.
(Universal Serial Bus) 2.0 signals up to 150
feet using a single Cat5e/6 cable. The USB2Mini supports all USB 2.0 high-speed devices,
from keyboards to printers, and will operate on
Windows®, Mac and Linux® operating systems.
Features
An integrated four-port hub allows for multiple
• Extends
port
up to 275
from the at once.
devicesUSB
to be
connected
to feet
the USB2-Mini
computer.
Additional USB hubs can be added, increasing the
• Uses
easyoftodevices
install, inexpensive
CAT5. into the
amount
that can be plugged
• Fully
compliant with USB 1.1 specifications.
USB2-Mini.
• Supports 1.5 and 12 Mbps data rate.
• Uses
a single CAT5 UTP cable between transmitter
Features
•
and
• receiver.
Supports all USB 2.0 and 1.1 Devices
• Bus powered
transmitter unit
Transparently
• Fully transparent
(does
not use
any emulation).
(Flash Drives,
Printers,
etc.)
• Compact
size. USB 1.1 keyboard and mouse
•
Supports
• Supports
MAC,
and SUN.
•
Works
on PC
Windows,
Mac and Linux Operating
• Plug and
play.
Systems
•
Integrated Four-Port Hub
•
Bus-Powered Local Unit
•
Power Adaptor for Remote Unit
•
Plug-and-Play Ready
What’s in the box?
USB-100
Part No.
Description
Please check the contents of the package before
USB2-Mini-S
USB 2.0/1.1 over Cat5e/6 Extender.
beginning
installation.
Includes: [USB2M-TX, USB2M-RX,
Qty
Description
and PS5VD4A]
Part Number
1
USB-100 Transmitter
USB-TX100
1
USB-100 Receiver
USB-RX100
1
6’ USB A-B Cable
CCUSBAB06
3.
4.
Connect the receiver to the peripheral device using
the included USB-Hub.
Join the USB-100 units using standard CAT5 UTP
cable.
Installation and Operation
Connecting the Transmitter
1.
2.
Connect the transmitter to the host using the A-B
USB cable (included with the unit).
The A side of the connector would go to the computer host and the B side would be connected to
the transmitter.
Note: You must connect the included USB-Hub to the
receiver unit for the system to work properly.
Note: The receiver provides remote power up to 500
mA to the connected peripherals. This power comes
from the host computer and is passed by the transmitter
to the receiver. In some applications, and external power
supply is required. SmartAVI can provide a power supply
for such cases with the receiver and transmitter units.