Download Samsung SCH-R850 User manual

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

Transcript

SCH-R850 Series
P O R T A B L E
M O B I L E
D U A L - M O D E
P H O N E
User Manual
Please read this manual before operating your
phone, and keep it for future reference.
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to
the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to
Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited
to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation
and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you
agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or
otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All
applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA), LLC
Headquarters:
1301 E. Lookout Drive
Richardson, TX 75082
Toll Free Tel:
Customer Care Center:
1000 Klein St.
Plano, TX 75074
1.888.987.HELP (4357)
Internet Address: http://www.samsungusa.com
©2008 Samsung Telecommunications America, LLC is a registered trademark of Samsung Electronics America, Inc. and its related
entities.
Do you have questions about your Samsung Mobile Phone?
For 24 hour information and assistance, we offer a new FAQ/ARS System (Automated Response System) at:
www.samsungwireless.com/support
GH68-25248A
R850.02_CH23_CB_090109_F4
Printed in Korea.
Nuance®, VSuite™ T9 Text Input, and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc. or its
affiliates in the United States and/or other countries.
The Bluetooth® word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered
trademarks and are wholly owned by the Bluetooth SIG.
microSD™ and the microSD logo are Trademarks of the SD Card Association.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT “AS IS”, AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Table of Contents
Section 1: Getting Started ..............................................4
Understanding this User Manual . . . . . . . . . . . . . . . . . . . . . . . . 4
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Activating Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Setting Up Your Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Memory Card (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Using Widgets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Using the Shortcuts Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
The In-Use Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Section 5: Understanding Your Contacts .................... 32
Features of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Front View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Command Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Understanding the Display Screen . . . . . . . . . . . . . . . . . . . . . 12
Your Phone’s Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Your Contacts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Adding a New Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . 32
Finding a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Editing an Existing Contact Entry . . . . . . . . . . . . . . . . . . . . . . 37
Speed Dial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Renaming a Contacts Group . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Deleting a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Sending a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Memory Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Section 3: Call Functions ............................................. 18
Section 6: Entering Text ............................................... 43
Making a Call — Number Entry Dialing . . . . . . . . . . . . . . . . . . 18
Making a Call — Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . 19
Making a Call — Voice Dialing . . . . . . . . . . . . . . . . . . . . . . . . 20
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Ignoring a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Adjusting the Call Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Calls Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Changing Text Entry Screens . . . . . . . . . . . . . . . . . . . . . . . . . 43
Changing the Text Entry Mode . . . . . . . . . . . . . . . . . . . . . . . . 45
Using T9® Mode (Phone Keypad Only) . . . . . . . . . . . . . . . . . . 46
Using Abc Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Entering Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Entering Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Section 2: Understanding Your Phone ...........................9
Section 4: Menu Navigation ......................................... 28
Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
1
Section 7: Messaging ................................................... 49
Creating and Sending New Messages . . . . . . . . . . . . . . . . . . 49
Message Sending Options . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Receiving New Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Erasing Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
55
56
58
58
Section 8: easyedgeSM .................................................. 60
Finding Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Section 9: Browser ....................................................... 61
Browser Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Launching Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How Browser Buttons Work . . . . . . . . . . . . . . . . . . . . . . . . . .
61
61
61
62
62
Section 10: Camera-Camcorder .................................. 63
Taking Pictures and Videos . . . . . . . . . . . . . . . . . . . . . . . . . .
Taking Snap Shots (Single Pictures) . . . . . . . . . . . . . . . . . . . .
Screen Layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Saving Pictures and Videos . . . . . . . . . . . . . . . . . . . . . . . . . .
Camera Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Camcorder Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The Photo Gallery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Point, Click, and Send Pictures and Videos . . . . . . . . . . . . . . .
63
63
65
67
68
73
77
78
Section 11: Music Player .............................................. 79
Accessing the Music Player . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Section 12: Multimedia ................................................ 82
Accessing Multimedia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
My Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
My Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
My Ringtones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
My Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Section 13: Tools .......................................................... 88
Accessing Your Phone’s Tools . . . . . . . . . . . . . . . . . . . . . . . . 88
Voice Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Memo Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
World Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Stop Watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Tip Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Section 14: Changing Your Settings .......................... 107
Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Widget . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sounds Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Call Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Phone Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Memory Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
107
107
107
110
111
113
116
122
2
Section 15: Toneroom ................................................ 126
Accessing Toneroom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Managing Your Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Section 16: Phone Info ............................................... 127
Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Icon Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
ESN / MEID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Section 17: Health and Safety Information ............... 128
Health and Safety Information . . . . . . . . . . . . . . . . . . . . . . . . 128
Warning Regarding Display . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Samsung Mobile Products and Recycling . . . . . . . . . . . . . . . 129
UL Certified Travel Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Consumer Information on Wireless Phones . . . . . . . . . . . . . . 130
Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Responsible Listening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Using Your Phone Near Other Electronic Devices . . . . . . . . . 140
FCC Hearing-Aid Compatibility (HAC) Regulations for
Wireless Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Potentially Explosive Environments . . . . . . . . . . . . . . . . . . . . 142
Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
FCC Notice and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Other Important Safety Information . . . . . . . . . . . . . . . . . . . . 144
Product Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Availability of Various Features/Ring Tones . . . . . . . . . . . . . . 145
Battery Standby and Talk Time . . . . . . . . . . . . . . . . . . . . . . . 145
3
Battery Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Section 18: Warranty Information ............................. 148
Standard Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 148
End User License Agreement for Software . . . . . . . . . . . . . . 151
Index ............................................................................ 156
Section 1: Getting Started
This section explains how to start using your SCH-R850 phone by
activating your service, setting up your Voicemail, or getting an
understanding of how this manual is put together.
Understanding this User Manual
The chapters of this manual generally follow the same order as
the menus and sub-menus in your phone. A robust index for
quick reference to most features begins on page 156.
Also included is important safety information that you should
know before using your phone. Most of this information is near
the back of the guide, beginning on page 128.
Notes and Tips
Throughout this manual some text is set apart from the rest. In
this way, important information, quick methods for activating
features, to define terms, and more are emphasized. The
definitions for these methods are as follows:
• Notes — Explain alternative options within the current feature, menu,
or sub-menu.
• Tips — Provide quick or innovative methods for performing functions
related to the subject at hand.
• Important — Points out important information about the current
feature that could affect performance, or even damage your phone.
Text Conventions
This manual provides condensed information about how to use
your phone. To make this possible, the following terms and icon
appear in place of repeatedly-used procedural steps:
select
➔
Touch a menu item or screen item to launch, access,
or save a highlighted menu item or screen field of
interest.
Used in place of “select” in long “drill down”
procedure steps.
Example: “...Settings ➔ Call Settings ➔ Call Answer...”
Charging the Battery
Your phone is powered by a rechargeable standard Li-Ion battery.
Only use Samsung-approved charging devices and batteries.
Samsung accessories are designed to maximize battery life. Use
of other accessories may invalidate your warranty and may
cause damage.
Getting Started
4
Use the Travel Adapter
The travel adapter included with
your phone is a convenient,
light-weight charger that rapidly
charges your phone from any
120/220 VAC outlet.
1.
2.
Plug the large end of the
USB Data Cable supplied
with your phone into the
Travel Adapter, as shown.
Incorrect
Correct
Plug the Travel Adapter into a standard 120 VAC or 220
VAC wall outlet.
Important!: For connection to an electrical supply not located in North
America, you must use an adaptor of the proper configuration for
the power outlet. Use of the wrong adapter could damage your
phone and void your warranty.
Incorrect
Correct
5
3.
If needed, install the battery in the phone. (For more
information, refer to “Install the Battery” .)
4.
Insert the smaller end of the Travel Adapter into the
charger/accessory connector on the upper left side of your
phone.
Warning!: Your touch screen responds best to a light touch from the pad of
your finger or a non-metallic stylus. Using excessive force or a
metallic object when pressing on the touch screen may damage
the tempered glass surface and void the warranty (see “Warranty
Information” on page 148).
Important!: You must unplug the adapter before removing the battery from
the phone during charging to avoid damage.
Low battery indicator
The battery indicator (
) in the upper-right corner of the
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
• Five bars (
) indicate a full charge.
• An empty battery icon (
) indicates a near empty battery.
• A blinking empty battery icon (
) and a tone sounding indicate
you have two to three minutes before the battery is too low to operate
the phone.
If you continue to use your phone without charging its battery, the
phone will shut down.
Activating Your Phone
Contact your Wireless Carrier and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
Install the Battery
Note: Your phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and travel adapter.
3.
Remove the Battery
1.
Press and hold
to
turn off the phone (if on).
2.
Press down on the
battery cover, slide the
cover (1) toward the
bottom end of the phone,
then lift the cover away
from the phone (2).
3.
Lift the battery up (1) and
away (2) from the phone,
top end first.
Important!: You must fully charge the battery the first time you use your
phone, otherwise you could damage the battery. From fully
discharged to fully charged, the battery requires up to 4 hours of
charge time.
1.
Insert the top end of the
battery first, matching
the gold contacts on the
battery to those on the
inside of the phone.
2.
Press lightly on the
bottom end of the battery down into the phone until it slips
into place.
Place the battery cover
over the battery (1) and
slide the battery cover up
into place (2).
Getting Started
6
Turn Your Phone On
1.
Press and hold the
LOCK key (
),
on the top of the
phone.
Note: If your phone is on and you press
for less than one second, the
phone will not power off. This prevents your phone from being turned
off accidentally.
Setting Up Your Voicemail
Voicemail allows callers to leave voice messages, which can be
retrieved any time.
Note: As with any other radio-transmitting device, do not touch the antenna
(at the bottom of the device) while using your phone as this can affect
call quality and can cause the phone to operate at a higher power level
than is necessary.
2.
The phone begins searching for a network signal.
3.
Once the phone finds a signal, the time, date, and day
appear in the second line of the display.
4.
You’re now ready to place and receive calls.
Note: If you are outside of your carrier’s coverage or roaming area, the No
Service icon (
) appears at the top of the phone’s display. If you
cannot place or receive calls, try later when service is available, or at
another location.
Turn Your Phone Off
䊳
7
Note: Once your Voicemail account has been set up, you can use the
Voicemail folder (under the Message menu) to view details of voice
messages in your Voicemail box.
1.
In Standby mode, touch the Dialer soft key, then touch and
hold
or dial your own mobile number to dial
Voicemail. (For more information, refer to “Making a Call
— Number Entry Dialing” on page 18.)
2.
Follow the prompts in the new user tutorial to setup your
mail box.
Listen to Voicemail
1.
In Standby mode, touch the Dialer soft key, then touch and
hold
or dial your own mobile number to dial
Voicemail. (For more information, refer to “Making a Call
— Number Entry Dialing” on page 18.) After connecting,
you will hear your voice greeting.
2.
You are prompted to enter your password.
Press and hold the LOCK key (
), on the top of the
phone, for two or more seconds. Your phone powers off.
Memory Card (Optional)
You can install a microSDTM card to provide additional memory
for storing files (such as, sound files and photos) in your phone.
Install a Memory Card
1.
Open the microSD cover on the right hand side of the
phone, as shown.
3.
Slowly release your pressure on the card. It will slide
outward a short distance.
4.
Remove the memory card from the memory card slot.
5.
If desired, install another memory card. (For more
information, refer to “Install a Memory Card” on page 8.)
6.
Replace the microSD cover.
Correct
Incorrect
2.
Make sure that the gold contacts of the card are face
down, as shown, then carefully slide the memory card into
the memory card slot until you feel it click into place.
3.
Replace the microSD cover.
Remove a Memory Card
1.
Open the microSD cover on the right hand side of the
phone.
2.
Carefully press the memory card inward until you feel it
release.
Getting Started
8
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also
describes the screen format and the icons that will be displayed
when the phone is in use.
Front View of Your Phone
Features of Your Phone
• Full-screen Touch Screen [high-resolution (240 x400 pixels), color]
• Widget bar and three-page Standby and Main Menu screens
• Motion and position sensitivity
• Full-HTML Browser
• Messaging (Text, Picture, Video, and Email) with QWERTY Touch
Keypad
• 3.0 Megapixel wide screen Camera-Camcorder
0
• High speed data (EVDO)
• Bluetooth® Stereo (v2.0) Wireless Technology (see Note)
• Global Positioning (GPS) Technology
• PIM Functions
• Voice and Touch Keypad Dial
• Music (MP3) Player and Video (MP4) Player
• Memory Card slot (for optional microSD™ cards)
Note: The R850™ phone supports the wireless hands-free profile and the
serial port profile for Bluetooth® v2.0 wireless technology. The R850™
does not support Bluetooth OBEX profiles.
9
Features
1.
Headset Connector — Used to connect an optional wired
headset or TTY device to your phone.
2.
Earpiece / Speaker — Lets you hear ringing and alert
tones, alarm tones, and the other parties to calls.
Power / Accessory Connector — Used to connect charging
accessories or any available accessory cables to your
phone.
11. Voice Recognition Key — Used to launch VoiceSignal voice
4.
Volume Key — Lets you adjust the ring volume in Standby
mode, adjust the voice volume during a call, or mute the
ringer during an incoming call.
microSD™ memory card for additional multimedia file
storage.
5.
Display — Indicates the status of your phone (including
numbers dialed, feature and function screens, status
icons, message indicators and contents, signal strength,
and so on) and shows all touch controls (hot buttons,
keypads, and menus).
6.
Send Key — Lets you place or receive a call. In Standby
mode, press the key once to access the Recent Calls log.
7.
Clear Key — Deletes characters from the display when you
are in text entry mode. Press this key to return to the
previous menu or screen when navigating features on your
phone.
8.
Microphone — Lets the other caller hear you clearly when
you are speaking to them.
9.
End Key — Ends a call. Returns you to Standby mode from
any feature, function, or menu.
3.
recognition system.
12. Memory Card Slot — Used to plug in an optional
13. Power On-Off/LOCK key — Turns the power on and off.
Locks and unlocks the keys and the touch screen and
lights the backlight.
10. Camera Key — Launches the Camera-Camcorder feature
of your phone and takes pictures or records videos.
Understanding Your Phone
10
Rear View
Command Keys
Power On-Off/LOCK key
• Press and hold the Power On-Off/LOCK key (
) to turn your
phone on or off.
• With the phone keys and touch screen locked, press and hold the
Power On-Off/LOCK key (
) to unlock the phone.
Note: With the phone locked, you can still answer incoming calls by pressing
the Talk key.
11
1.
Camera Lens — The lens of your built-in camera.
2.
Flash — Lets you take photos in low light conditions.
3.
Battery Cover — Protects the battery.
4.
Camera Key — Launches the Camera-Camcorder feature
of your phone and takes pictures or records videos.
Volume Key
• In Standby mode, press the Volume key (
) on the left side of
the phone Up or Down to adjust the volume of the incoming calls
ringer.
• When receiving a call, press the Volume key Up or Down to mute the
ringer.
• During a call, press the Volume key Up or Down to adjust the voice
volume in the Earpiece-Speaker.
• When playing a music file or video clip, press the Volume key Up or
Down to adjust the playback volume.
Soft Keys
Functions for the soft keys are defined by what appears above
each in the display. There are four soft keys across the bottom of
the display.
Send Key
The Send key (
) is used to answer calls, dial calls, and to
recall the last number(s) dialed, received, or missed.
• Press
once to answer calls.
• Enter a number and briefly press
to make a call.
• Briefly press
in Standby mode to display a list of recent calls to
and from your phone.
• Press
twice in Standby mode to call the most recent number.
• Press
to pick up a waiting call. Press
again to switch back
to the other call.
Camera Key
Use the Camera key on the right side of the phone to launch the
Camera function on your phone by pressing and holding this key.
Understanding the Display Screen
1.
Clear Key
The Clear key (
) is used to erase or clear numbers, text, or
symbols from the display. You can also use the key to return to a
previous menu or to return to Standby mode from any menu.
• If you enter an incorrect character, briefly press
to backspace
(and delete) the character.
• To erase the entire sentence, press and hold
.
• To return to the previous menu level, briefly press
.
End Key
• Briefly press
once to disconnect a call.
• Press
to return to Standby mode from any menu, or to cancel the
last input.
The top line of your
phone’s display contains
icons that indicate
network status, battery
power, signal strength,
connection type, and
more.
1
5
2
2.
Tapping the left side of
the display opens the
Widget Bar that lists
available shortcut
widgets.
3.
The bottom line of the
display shows available
soft keys. The sample screen shows the following soft
keys:
• Dialer — Launches the Dialer screen that lets you place calls.
• Contacts — Launches the Contacts list screen.
• Messaging — Launches the Messaging menu.
4
3
Understanding Your Phone
12
4.
5.
• Menu — Launches the Main Menu.
The center portion of the display shows information such
as call progress information, messages, and photos.
Tapping the top line of the display pulls down a four-icon
shortcut bar. To hide the four-icon shortcut bar, tap
anywhere on the screen below the shortcut bar.
Display Screen Icons
Your phone can show you definitions of the icons that appear on
the top line of the display.
To access the Icon Glossary:
䊳
In Standby mode, press Menu, then select Phone Info ➔
Icon Glossary. A list appears showing the icons that can
appear on the top line of the displays.
Dialogue Boxes
Dialogue boxes prompt for action, inform you of status, or warn
of situations such as low battery. Dialogue boxes and their
definitions are outlined below.
• Choice
– Example: “Save Message?”
• Reconfirm
– Example: “Erase All Messages?”
• Performing
– Example: “Sending...” “Connecting...”
13
• Completed
– Example: “Message Saved”
• Information
– Example: “New Message”
• Error
– Example: “System Error!”
• Warning
– Example: “Low Battery,” “Memory Full!”
Backlight
The backlight illuminates the display. It goes off when the screen
and phone keys are not pressed within a period of time set in the
Backlight Time menu. The backlight turns on when you press a
key.
Note: During a phone call, the display backlight dims and turns off after 10
seconds to conserve battery power, regardless of the Backlight Time
setting.
(For more information, refer to “Backlight Time” on page 111.)
Your Phone’s Modes
Call Answer Mode
You can choose to answer a call by pressing any key except
or
, or by pressing only the
key. (For more
information, refer to “Call Answer” on page 113.)
Input Mode
Input mode determines how you enter text, numbers, and
symbols. While at any text entry screen, press the down arrow in
the upper left corner of the screen, then select the input mode
from the drop-down menu. Optional input modes are:
• 3X4Keypad (phone-style touch keypad)
• QWERTY (full touch keypad — changes display to landscape mode)
• Handwriting box (divided pallet)
• Handwriting full screen (undivided pallet)
(For more information, refer to “Changing the Text Entry Mode”
on page 45.)
Tip: When using the 3X4Keypad mode, you can also choose between Abc/
ABC, T9 Word, and 123 by pressing the Entry Mode soft key.
Lock Mode
When the phone is in Lock Mode, restrictions are placed on
phone use. You can receive calls and messages, but cannot place
outgoing calls (except for emergency numbers) until you unlock
the phone. Lock Mode also restricts access to menus and the
Volume key.
To enter Lock Mode:
䊳
In Standby mode, press
on the top of the
phone. The lock mode screen
appears momentarily in the
display, then the screen goes
dark.
To exit Lock Mode:
䊳
While in Lock mode, press
and hold
until the
Standby mode screen
appears in the display.
(For more information, refer to
“Change Lock Code” on page 118.)
Standby Mode
Standby mode is the state of the phone once it has found service
and is idle. The phone goes into Standby mode:
• After you power the phone on.
• When you press the End key after a call or from within a menu.
In Standby mode, you will see the time, day, and date as well as
all phone status icons.
Understanding Your Phone
14
Place Calls in Standby Mode
1.
In Standby mode, enter a phone number, and press
to place a call.
2.
Press
from the display and the desired ringer value appears.
Vibrate Mode
䊳
to return to Standby mode.
In Standby mode, repeatedly press the Volume key
(
) down until “Vibrate only” appears in the display.
Receive Messages in Standby Mode
While your phone is in Standby mode, new incoming messages
automatically appear in the screen as they are received. Use the
Navigation key to scroll through text or to view complete images.
Talk Mode
You can place and receive calls only when your phone is on.
While in a call, your phone is in talk mode. Press the Clear key to
display a list of menu options. (For more information, refer to
“The In-Use Options” on page 30.)
Note: The Volume key is on the left side of phone.
Adjust the Ringer
To adjust the Ringer volume, while in Standby mode, press the
Volume key up or down.
1.
Options are:
•
•
•
•
•
Enter/Exit Silent Mode
Silences the ringers, the alerts, and the tones your keypad makes
when you press a key.
To enter Silent Mode:
䊳
In Standby mode, repeatedly press the Volume key
(
) Down until “Silence All” appears in the display.
To exit Silent Mode:
䊳
15
While in Silent mode and Standby mode, repeatedly press
the Volume key (
) Up until “Silence All” disappears
In Standby mode, press the Volume key up or down to set
the call ringer volume as desired.
2.
Silence All
Alarm only
Vibrate only
1 Beep
Low
•
•
•
•
Low/Medium
Medium
Medium/High
High
When you are satisfied with the setting. Your phone returns
to Standby mode.
Note: The Vibrate icon ( ) appears in the display when the phone is in
Vibrate mode. The No Ring icon (
) appears in the display when the
phone is in Silence All mode.
Music Player Mode
The Music Player in your phone can play music files (MP3, CMX,
Midi, AAC, AAC+, and eAAC+), but only if they are stored in the
My Music folder on an optional microSD Memory Card.
– In Standby mode, press the Menu soft key, then select Camera.
– In Standby mode, press the Menu soft key, then select Multimedia ➔
Camera.
– In Camcorder mode, select
.
• Exiting Camera Mode — Press
Note: For more information, refer to “Memory Card (Optional)” on page 8.
• Entering Music Player Mode:
– In Standby mode, display the shortcut menu by selecting the status bar
at the top of the display, then select (
).
– or –
– In Standby mode, press the Menu soft key, then select Music Player.
Note: For more information, refer to “Music Player” on page 79.
• Exiting Music Player Mode — Press
.
Camera Mode
Camera mode lets you take pictures with your phone’s camera.
In Camera mode, you can also adjust the resolution and
appearance of your pictures.
For more information, refer to “Camera-Camcorder” on
page 63.
• Entering Camera Mode:
– In Standby mode, press and hold the Camera key (
) — on the
right side of the phone.
.
Camcorder Mode
Camcorder mode lets you record videos with your phone’s
camera. In Camcorder mode, you can also adjust the resolution
and appearance of your videos.
For more information, refer to “Camera-Camcorder” on
page 63.
• Entering Camcorder Mode:
– In Standby mode, press and hold the Camera key (
) — on the
right side of the phone — then, select
.
– In Standby mode, press the Menu soft key, then select Multimedia ➔
Camcorder.
– In Camera mode, press
.
• Exiting Camcorder Mode — Press the
key.
Video Player Mode
The Video Player in your phone can play video files [3GS, MP4,
H.263, and H.264 (Decoding: QCIF Only)], but only if they are
stored in the My Video folder in the phone or on an optional
microSD Memory Card.
Understanding Your Phone
16
Note: For more information, refer to “Memory Card (Optional)” on page 8.
• Entering Video Player Mode:
1.
In Standby mode, press Menu, then select Multimedia ➔
My Videos.
– or –
In camcorder mode, press
.
The Videos screen appears containg a list of videos with
thumbnail images appears in the display.
2.
Select the desired video. The Video Player screen appears
in the display and begins playing the highlighted video.
Note: For more information, refer to “Video Player” on page 84.
17
Section 3: Call Functions
This section explains how to make or answer a call. This section
also includes the features and functionality associated with
making or answering a call.
Making a Call — Number
Entry Dialing
1.
With the phone on, press the
Dialer soft key. The touch
keypad screen appears in the
display.
2.
Enter the number you wish to
call using the touch keypad.
3.
Press
or the Voice Call
soft key to place the call.
Dialing Emergency Numbers
When you call an Emergency
Number, such as 911, your phone
locks itself in emergency mode, only allowing you to make calls
to the emergency call center you originally contacted. This
enables emergency operators to more easily dispatch aid, such
as police, fire fighting, and emergency medical personnel.
1.
With the phone on, press the Dialer soft key. The touch
keypad screen appears in the display.
2.
Enter 911 using the touch keypad.
3.
Press
or the Voice Call soft key to place the call.
Important!: Emergency number 911 is preset into your phone.
If you call 911 an audible tone is heard and an Emergency
prompt appears in the display for the duration of the call.
Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
Important!: DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
Note: You can specify other numbers than 911 as emergency numbers using
the Emergency # settings. (For more information, refer to “Emergency
#” on page 118.)
Manual Pause Calling
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Call Functions
18
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
• W Pause — A hard pause stops the calling sequence until you press
.
• P Pause — A two-second pause stops the calling sequence for two
seconds and then automatically sends the remaining digits.
Making a Call — Speed Dialing
To manually call a number with pause(s) without storing it to your
Contacts:
One-Touch Dialing
1.
With the phone on, press the Dialer soft key. The touch
keypad screen appears in the display.
2.
Enter the number you wish to call.
3.
Press the Add Pause soft key.
A pop-up menu containing the following options appears in
the display:
• Wait — a hard pause (awaits input from you).
• 2-Sec Pause — a two-second pause.
Tip: You can create pauses longer than two seconds by entering multiple P
Pauses.
19
4.
Select the desired pause option. The respective letter (W or
P) is added to your number entry.
5.
Press
or the Voice Call soft key to call the number.
You can store phone numbers and contact names in your phone’s
Contacts list. Speed Dialing lets you quickly and easily dial any
contact in your Contacts list by using that contact’s Favorites
number in the list. You can assign and change Favorites (speed
dial) numbers for your contacts. (For more information, refer to
“Assigning a Speed Dial Number” on page 40.)
Speed Dial numbers 002 through 009 are special One-Touch
dialing numbers. You can call the phone numbers stored in your
phone’s Contacts list and assigned Speed Dial numbers 002
through 009 by pressing and holding a single key.
Example: For Speed Dial number 003, press the Dialer soft key, then press
and hold
until the name and number appear in the display
and the number is dialed.
Two-Touch Dialing
Memory locations 010 through 030 are special Two-Touch
dialing locations.
Example: For Speed Dial number 013, briefly press
, then press and
hold
until the name and number appear in the display and
the number is dialed.
Pause Dialing From a Contacts Entry
• If you speed dial a contact that contains two-second (P) pause(s)
simply wait for the pauses to pass and the dialing to complete.
• If you speed dial a contact that contains hard (W) pauses, wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and press
to continue
your dialing sequence.
Note: For more information about dialing pauses, refer to “Manual Pause
Calling” on page 18.
Making a Call — Voice Dialing
• When saying a name, say the first name then the last name.
Dialing a Name
To dial a name, do the following:
1.
pronounced through the earpiece.
2.
Say, “Call”. You are prompted to “Say the name or
number...”.
3.
Speak clearly and say the name of a person in your
Contacts list, first name followed by last name.
Voice Dial displays a choice list of up to three names and
prompts you with “Did you say?” followed by the first
Using Voice Dial
Voice Dialing Tips:
• Wait for the beep before speaking.
• Speak clearly at a normal volume, as if you were talking to someone
on the phone.
).
“Say a Command” appears in the display and is
Your R850 mobile phone includes state-of-the-art voice
recognition software that lets you dial numbers using your voice.
Use the Voice Dial command to dial any number stored in your
Contacts list by saying the name of the contact (Name Dialing).
You can also use Voice Dial to dial any valid telephone number,
even numbers not stored in your contact list, by speaking the
individual digits in the number (Digit Dialing).
In Standby mode, press the Voice Recognition key (
name on the list.
4.
Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
the list. (For more information, refer to “Confirmation” on
page 89.)
• Press
to exit Voice Service without dialing.
If the recognized name has multiple numbers stored for it
(that is, Home, Work, Mobile, and so on), Voice Dial
displays the possible choices and prompts you with
“Which location?”
Call Functions
20
5.
Say one of the following number types:
• “Mobile”
• “Home”
• “Work”
• “Fax”
Voice Dial dials the specified number.
(For more information, refer to “Confirmation” on
page 89.)
Dialing a Number
To dial a number using Voice Dial, do the following:
1.
In Standby mode, press the Voice Recognition key (
).
“Say a Command” appears in the display and is
pronounced through the speaker.
2.
Say “Call”. VoiceSignal prompts you to “Say the name or
#”.
3.
Speak clearly and say the telephone number of the person
you want to call. For example, say “7 8 1 9 7 0 5 2 0 0."
Voice Dial displays a choice list of up to three numbers and
prompts you with “Did you say?” followed by the first
number on the list.
4.
21
Say “Yes” to confirm the number or “No” to hear the next
one, or use the keypad to select the correct number from
the list.
• Press
to exit Voice Service without dialing.
Pause Dialing From a Contacts Entry
• If you voice dial a contact that contains 2-sec (P) Pauses(s), wait for
the appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
• If you voice dial a contact that contains hard (W) Pause(s), simply wait
for the pauses to pass and the dialing to complete.
Answering a Call
Your phone notifies you of a call in the following ways:
• A ring tone sounds and/or your phone vibrates (Your phone provides
eight ring volume settings including: Silence All, Alarm only, Vibrate
only, 1 Beep, Low, Low/Medium, Medium, Medium/High, or
High, and/or different ring types to distinguish callers.)
• A phone number (unless blocked by the caller) and a name appear in
the display (If the caller’s number and name are stored in your
Contacts list).
• If the caller can’t be identified, Call from unavailable #, Call from
restricted number, or no number appears in the display.
• Your phone continues to notify you of the call until one of the following
events occurs:
– You answer the call.
– You ignore the call.
– The calling party ends the call.
– The call is sent to voicemail.
Review the Calls Log
1.
In Standby mode, press the
Menu soft key, then select
Calls. The Calls list appears
in the display showing All
calls.
2.
Select the Down arrow in the
upper right corner of the
screen. The following Calls
log options appear in a dropdown menu:
• All
• Incoming
• Outgoing
• Missed
• Data
Answering an Incoming Call
䊳
Press the
key. The ring tone and/or vibration stop and
the caller’s voice can be heard in the earpiece.
Tip: You can set your phone to answer calls automatically or when you press
any key but
. (For more information, refer to “Call Settings” on
page 113.)
Ignoring a Call
When you ignore an incoming call, the call is immediately
forwarded to your voice mail.
Adjusting the Call Volume
䊳
In Standby mode, repeatedly press the Volume key Down
until the Call Volume Level desired appears in the display.
The Volume key is on the left side of phone.
Calls Log
The Calls log retains information about Outgoing, Incoming, and
Missed calls. You can also view times for your last call and the
total times for all calls.
Note: To review your device’s Call Timers or Data Counters, press the Call
Timer soft key or the Data Counter soft key.
3.
Select the Calls log that you wish to review or the function
you wish to access.
Call Functions
22
Note: In cases where a Calls log entry concerns a call to or from a Contacts
entry, the Contact name associated with the number appears in the
Calls log list instead of the number.
Outgoing Calls
Your phone retains information about the last 90 outgoing calls
and stores them in the Outgoing calls log. You can review the
Outgoing calls log for the time and date of a call, as well as other
information.
Note: In Standby mode, you can quickly view your most recent calls of all
types by briefly pressing
. A list containing up to 270 of your most
recent outgoing, incoming, and missed calls appears in the display.
23
1.
In Standby mode, press the Menu soft key, then select
Calls. The Calls list appears in the display showing All
calls.
2.
Select the Down arrow in the upper right corner of the
screen, then select Outgoing. A list of Outgoing Calls
appears in the display.
3.
Select a call to view further information about it. The call
information screen shows the recipient’s name (Contacts
only), the number dialed, the time and date the call was
made, and the duration of the call.
The call information screen
offers the following options:
•
— Press to dial this
number.
•
— Press to send a
Text, Picture, or Video message
to this number. (For more
information, refer to “Creating
and Sending New
Messages” on page 49.)
• To add the number to your
Contacts list, press the Add To
Contacts soft key.
• Contacts only — To view
Contact information for this call,
press the View details soft key.
• To delete the selected call from your Outgoing calls log, press the
Erase soft key.
• To block / permit deletion of the selected call, press the More soft
key, then select Lock.
• To copy this number to the Dialer screen so that you can make
changes (such as, to add Pauses) before reuse, press the More
soft key, then select Copy to dialer.
5. To review another Outgoing call, press the Left and Right
arrow keys at the top of the screen.
4.
Incoming Calls
Your phone retains information about the last 90 Incoming calls
and stores them in the Incoming calls log. You can review the
Incoming calls log for the time and date of the call, as well as
other information.
1.
In Standby mode, press the Menu soft key, then select
Calls. The Calls list appears in the display showing All
calls.
2.
Select the Down arrow in the upper right corner of the
screen, then select Incoming. A list of Incoming Calls
appears in the display.
3.
Select a call to view further
information about it. The call
information screen shows the
caller’s name (Contacts only),
the number called received
from, the time and date the
call was received, and the
duration of the call.
4.
The call information screen
offers the following options:
•
— Press to dial this
number.
•
— Press to send a Text, Picture, or Video message to this
number. (For more information, refer to “Creating and Sending
New Messages” on page 49.)
• To add the number to your Contacts list, press the Add To Contacts
soft key.
• Contacts only — To view Contact information for this call, press the
View details soft key.
• To delete the selected call from your Incoming calls log, press the
Erase soft key.
• To block / permit deletion of the selected call, press the More soft
key, then select Lock.
• To copy this number to the Dialer screen so that you can make
changes (such as, to add Pauses) before reuse, press the More
soft key, then select Copy to dialer.
5. To review another Incoming call, press the Left and Right
arrow keys at the top of the screen.
Missed Calls
Your phone retains information about the last 90 missed calls
(calls that were never picked up) and stores them in the Missed
calls log. You can review the Missed calls log for the time and
date of the call, as well as other information.
1.
In Standby mode, press the Menu soft key, then select
Calls. The Calls list appears in the display showing All
calls.
Call Functions
24
2.
Select the Down arrow in the upper right corner of the
screen, then select Missed. A list of Missed Calls appears
in the display.
3.
Select a call to view further
information about it. The call
information screen shows the
caller’s name (Contacts only),
the number called received
from, the time and date the
call was received, and the
duration of the call.
4.
25
The call information screen
offers the following options:
•
— Press to dial this
number.
•
— Press to send a
Text, Picture, or Video message
to this number. (For more information, refer to “Creating and
Sending New Messages” on page 49.)
• To add the number to your Contacts list, press the Add To Contacts
soft key.
• Contacts only — To view Contact information for this call, press the
View details soft key.
• To delete the selected call from your Missed calls log, press the
Erase soft key.
• To block / permit deletion of the selected call, press the More soft
key, then select Lock.
• To copy this number to the Dialer screen so that you can make
changes (such as, to add Pauses) before reuse, press the More
soft key, then select Copy to dialer.
5. To review another Incoming call, press the Left and Right
arrow keys at the top of the screen.
All Calls
You can review all of the calls log entries (outgoing, incoming,
and missed calls) for the time and date of a call, as well as other
information.
1.
In Standby mode, press the Menu soft key, then select
Calls. The Calls list appears in the display showing All
calls.
2.
Select a call to view further information about it. The call
information screen shows the caller’s name (Contacts
only), the number called (by), the time and date the call
was made / received, and the duration of the call.
3.
The call information screen offers the following options:
•
— Press to dial this number.
•
— Press to send a Text, Picture, or Video message to this
number. (For more information, refer to “Creating and Sending
New Messages” on page 49.)
• To add the number to your Contacts list, press the Add To Contacts
soft key.
• Contacts only — To view Contact information for this call, press the
View details soft key.
• To delete the selected call from your Calls log, press the Erase soft
key.
• To block / permit deletion of the selected call, press the More soft
key, then select Lock.
• To copy this number to the Dialer screen so that you can make
changes (such as, to add Pauses) before reuse, press the More
soft key, then select Copy to dialer.
4. To review another call, press the Left and Right arrow keys
at the top of the screen.
Call Timer
View the duration of your last call, total calls, and calls made
during the life cycle of you phone using the Call Timer feature.
Note: Call Timer is not for billing purposes.
1.
In Standby mode, press the Menu soft key, then select
Calls. The Calls list appears in the display showing All
calls.
2.
Press the Call Timer soft key.
The following options appear in the display:
• Last Call — View the duration of your last call.
• Outgoing Calls — View the duration of the total outgoing calls
made on your phone since all timers were last reset.
• Incoming Calls — View the duration of the total incoming calls
received on your phone since all timers were last reset.
• Roaming Calls — View the total calls duration on your phone
while roaming since all timers were last reset.
• All Calls — View the duration of the total call, incoming, outgoing,
and data calls made on your phone since all timers were last reset.
• Last Reset — View the time and date all timers were last reset.
• Lifetime Calls — View the number and total duration of all calls
since your phone was activated.
3. Press the Reset soft key to reset all counters except
Lifetime Calls.
Note: Although Total Calls timers can be erased, the Lifetime Calls timer can
never be erased.
Data Counter
View the amount of Transmit data, Receive data, and Total data
transmitted or received since the last time you reset the data
counters, and the Lifetime amount of data transmitted or
received.
Note: Data Counter is not for billing purposes.
Call Functions
26
1.
In Standby mode, press the Menu soft key, then select
Calls. The Calls list appears in the display showing All
calls.
Press the Data Counter soft key The following options
appear in the display:
• Transmitted — View the total amount of data transmitted by your
phone since the last reset.
• Received — View the total amount of data received by your phone
since the last reset.
• Total — View the total amount of data sent or received by your
phone since the last reset.
• Last Reset — View the time and date all timers were last reset.
• Lifetime Data Counter — View the total amount of data sent or
received by your phone since activation (Lifetime Data Counter
cannot be reset).
3. Press the Reset soft key to reset all counters except
Lifetime Data Counter.
2.
appears in the top line of the display when Roaming is active,
and extra charges may apply when making or receiving calls.
Note: Some features may be unavailable while roaming. Roaming also
consumes additional power from the battery requiring more frequent
recharging. Contact your Wireless Provider for more information about
Roaming.
How Roaming Works
Roam Option lets you set roaming preferences if you move in and
out of your home network. The following roaming options are
available:
• Home Only — Your phone is available for normal operation only in the
designated coverage area.
• Automatic — Your Wireless Provider’s Preferred Roaming List (PRL) of
networks is used to acquire service. If no preferred networks are
found, any digital system is acquired.
Note: For more information, refer to “System Select” on page 120.
Note: Although Total data counters can be erased, the Lifetime Data Counter
can never be erased.
Roaming
What is Roaming?
Roaming lets you use your phone when you travel outside of your
Wireless Provider’s coverage area. The Roaming icon ( )
27
Section 4: Menu Navigation
This section explains the menu navigation for your phone. It also
describes the menus available with your phone.
Menu Navigation
Access menus using the Menu soft
key, other soft keys, or icons on the
Widget Bar or Shortcut Bar.
1.
2.
3.
In Standby mode, press the
Menu soft key. The Main
Menu page (the first of three
pages) appears in the display.
If needed, select either the
Main Menu, the easyedge, or
the Settings and Multimedia
page by pressing and
dragging the current page left
or right to display each
succeeding page.
Select icons or menu options to access a menu or submenu shown in the display.
Rearranging Main Menu Shortcut Icons
Pages easyedge and Settings and
Multimedia of the Main Menu
contain shortcut icons that launch
particular features and functions of
phone without drilling down through
multiple layers of menus.
You can rearrange the icons on
Pages easyedge and Settings and
Multimedia to suit your needs and
preferences.
1.
In Standby mode, press the
Menu soft key. The Main
Menu appears in the display.
2.
Select easyedge and Settings and Multimedia by pressing
and dragging the current Main Menu page left or right to
display the desired page.
3.
Unlock the selected Main Menu page by pressing the Icon
Lock button (
) (upper right hand corner of the screen).
Menu Navigation
28
4.
5.
To reposition an icon on the
page, press and drag the icon
to its new position. All other
icons to the right of, and
below, this position
automatically shift their own
positions in sequence.
Widget Bar Shortcuts
1.
In Standby mode, press the
right arrow tab on the left
edge of the display. The
Widget Bar slides open to the
right and lists icons for those
Widgets selected in the
Widget settings. (For more
information, refer to “Widget”
on page 107.)
2.
Scroll through the Widget list
by pressing and sliding within
the Widget Bar until a desired
Widget icon appears.
3.
If needed, select one of the three Standby screen pages to
receive the Widget icon by pressing and dragging the
current Standby screen left or right to display each page.
4.
Press, hold, and slide the Widget icon to the right until it is
free of the Widget Bar. The icon now displays on the
Standby screen and expands in size.
To save your change(s), press
the Save soft key.
To discard your change(s),
press
.
Return to the Previous Menu
Press
to return to the previous menu.
Using Widgets
Widgets are special icons that you can use to launch particular
phone features and functions or to quickly access particular
Internet addresses. You can initially access the widgets on your
phone by displaying the Widget Bar.
Widget Bar
The Widget Bar is an easily accessed list of widgets that acts like
a menu or storage bay for your widgets.
29
Note: You can position a Widget icon as needed by pressing, holding, and
sliding it.
5.
Select a Widget icon on the standby screen to launch its
function.
䊳
Note: You can return a Widget icon to the Widget Bar simply by pressing,
holding, and sliding the icon until it overlaps the Widget Bar.
6.
Close the Widget Bar by pressing the left arrow tab.
Returning Widgets to the Widget Bar
1.
In Standby mode, press the right arrow tab on the left edge
of the display. The Widget Bar slides open to the right and
lists icons for those Widgets selected in the Widget settings
screen. (For more information, refer to “Widget” on
page 107.)
To return a single Widget to the Widget bar:
• If needed, select one of the three Main Menu pages by pressing
and dragging the current Main Menu page left or right to display
each page.
• Press and drag the Widget icon back to the Widget bar.
3. To return all Widgets to the Widget bar, simply rock the
handset back and forth until all Widget icons reappear in
the Widget bar.
2.
Using the Shortcuts Bar
The Shortcut Bar is an easily accessed list of icons that let you
directly access key options on your phone.
In Standby mode, press the icon bar at the top of the
display. The Shortcut Bar opens downward and lists icons
for the following menu options:
• Send Text Message — Opens the Text Msg screen, letting you
compose and send a Text Message. (For more information, refer to
“Creating and Sending a Text Message” on page 49.)
• Memo Pad — Opens the Memo screen listing any existing
memos. (For more information, refer to “Memo Pad” on
page 97.)
• Music Player — Launches the Music Player. (For more
information, refer to “Music Player” on page 79.)
• Bluetooth — Opens the Bluetooth screen listing any registered
Bluetooth devices. (For more information, refer to “Bluetooth” on
page 92.)
The In-Use Options
Access numerous menus and features even while in a call.
Note: If the call is disconnected while accessing the In-Use Option, the InUse Option disappears from the display and the phone eventually
returns to Standby mode.
1.
While in a call, press the Clear key (
). The following
menu items appear in the display:
• Speaker on — Enables Speakerphone mode to share the call with
others nearby.
Menu Navigation
30
• Switch to headset — Connects a Bluetooth device, such as a
headset, in place of the phone’s earpiece and microphone.
• Mute — Blocks sound going to the other party(ies) on the call.
• Memo — Create and save a memo.
• Messages — The Messaging menu appears in the display. (For
more information, refer to “Messaging” on page 49)
• End Call — Tap to end the current call.
• Dialer — Allows you to dial another party, which the first call is put
on hold.
• Contacts — The Contacts Find screen appears in the display.
• Add To Contacts — When the Contacts screen appears in the
display, you can add a new Contact.
• Send DTMF — Send your phone number as tones (if you’re the
recipient of the call). Send the recipient’s phone number as tones (if
you’re the originator of the call).
2. Press the
key to exit the menu.
31
Section 5: Understanding Your Contacts
This section explains how to manage your daily contacts by
storing their name and number in your Contacts. Contacts entries
can be sorted by name.
2.
Your Contacts List
Your Contacts list can store up to 2000 entries, with each contact
having up to five associated phone numbers, an Email address,
and a picture ID.
Each phone number can be up to 32 digits in length, including
hard pauses. Contact names can be up to 32 characters in
length. You can also specify a memory location for each entry,
and you can restrict access to the Contacts list to prevent
unauthorized use.
Tip: One-Touch, Two-Touch, and Three-Touch Dialing allow you to call
numbers stored in your Contacts list faster. (See page 19.)
Open Your Contacts List
1.
In Standby mode, press the Contacts soft key. The Contacts
screen appears in the display.
To find a Contact, select the Search field. The 3X4 Keypad
screen appears in the display.
• Enter the first few letters of the Contact’s name. A list of Contacts
with names matching the letters you entered appears below the
Search field.
• Select the desired Contact to display the Contacts list, then select
again for the Contact details.
Adding a New Contacts Entry
You can add an entirely new entry to your Contacts list or add
information to an existing entry.
Using the Contacts Add Option
1.
In Standby mode, press the Contacts soft key. The Contacts
screen appears in the display.
Note: In Standby mode, press the Menu soft key and select Contacts.
2.
Press the New Contact soft key. The New Contact screen
appears in the display.
Note: In Standby mode, press the Menu soft key and select Contacts.
Understanding Your Contacts
32
Select the Name field. The
3X4 Keypad text entry screen
appears in the display.
• If desired, select another text
entry screen. (For more
information, refer to “Changing
Text Entry Screens” on
page 43.)
4. Enter a name or phrase to
associate with the new
Contact. (For more
information, refer to “Entering
Text” on page 43.)
3.
Select a phone number field
(Mobile, Mobile 2, Home, Work, or Fax) or the Email address
(Email) field. The 3X4 Keypad text entry screen appears in
the display.
• If desired, select another text entry screen. (For more information,
refer to “Changing Text Entry Screens” on page 43.)
6. Enter a number or address for the new Contact. (For more
information, refer to “Entering Text” on page 43.)
5.
If desired, assign the new
Contact to a Group. This lets
you send messages to and
find this Contact and other
related contacts. (For more
information, refer to “Group”
on page 37.)
• Select the General field. The
Select Group field appears in the
display. The following groups are
available:
– New group
– Family
– Friends
– Colleague
– Business
• Select the preferred group. A message pops-up confirming the
group assignment for this Contact.
8. If desired, select a unique Ringtone or voice memo file to
identify this new Contact. (For more information, refer to
“Ringer Type” on page 112.)
7.
9.
33
If desired, enter an additional phone number (Mobile 2,
Home, Work, or Fax) or Email address (Email) for the new
Contacts entry.
10. If desired, select an identifying image selecting the photo
ID field. You are given the option to take a photo or to use a
current image. (For more information, refer to “My
Images” on page 82.)
11. To save the new Contacts entry, press the Save soft key.
Creating a new Contacts entry:
3.
Select Add New Contacts. The New Contact screen appears
in the display with the number you’re saving populating
the Mobile field.
4.
To save the number as other than the first Mobile number,
press the Number Type Change button (
) The following
(number type) icons appear in the display:
Saving a Number from a Call
Once you’ve finished a call, you can save the number of the
caller to your Contacts list.
Mobile
Note: If the call was incoming and Caller ID information was unavailable,
then the Save option is also unavailable.
1.
2.
After you press
to end your call, the call time, length
of call, phone number, and name of the other party (if
available) appear in the display.
Press the Add to Contacts soft key. The Add To Contacts
screen appears in the display showing the following
options:
• Add New Contacts — Lets you create a new Contacts entry.
• Update existing — Lets you add the number or Email address you
just entered to an existing Contacts entry.
Home
Work
Fax
5.
Select the number type that matches your new entry. The
New Contact screen appears in the display with the
number being save populating the selected number type
field. (For more information on creating a new Contacts
entry, see “Using the Contacts Add Option” on page 32.)
Tip: You can also store a phone number from Standby mode by entering the
number, and pressing the Save soft key.
Understanding Your Contacts
34
Adding the number to an existing Contacts entry:
6.
7.
8.
10. Make any added changes you wish to the Contacts entry.
(For more information, refer to “Editing an Existing Contact
Entry” on page 37.)
Select Update existing. The
Contacts screen appears in
the display showing your
current Contacts list.
11. To save the Contacts entry, press the Save soft key.
Storing Number from a Calls Log
Select the Search field and
enter the first few characters
of the Contacts entry name
under which you will store the
saved number. (For more
information on finding a
Contacts entry, see “Using
the Contacts Add Option” on
page 32.)
You can store numbers from the
Calls logs to your Contacts.
1.
Mobile
Home
Work
Fax
9.
35
Select the Down arrow in the
upper right corner of the
screen. The following Calls
log options appear in a dropdown menu:
• All
• Incoming
• Outgoing
• Missed
• Data
3. Select the Calls log that you wish to review.
2.
Select the desired Contacts
entry. The following (number type) icons appear in the
Update existing screen:
Select the appropriate unassigned number type. The
Contact screen appears in the display.
In Standby mode, press the
Menu soft key, then select
Calls. The Calls list appears
in the display showing All
calls.
4.
Select the number you wish to store in your Contacts list.
The associated Call Information screen appears in the
display.
5.
Press the Add To Contacts soft key. The Add To Contacts
screen appears in the display showing the following
options:
• Add New Contacts — Lets you create a new Contacts entry.
• Update Existing — Lets you add the selected number to an
existing Contacts entry.
For more information on saving the number, see “Saving a
Number from a Call” on page 34.
Finding a Contacts Entry
Voice Method
Use the VoiceSignal Contacts command to view contact
information for any named contact stored in your Contacts list by
saying the name.
Note: The Contacts command shows the requested contact information in
the display but does not dial any phone numbers for the contact.
To look up information for a specific contact:
1.
In Standby mode, press the Voice Recognition key
(
).
“Say a Command” appears in the display and is
pronounced through the speaker.
2.
Say “Look up”.
VoiceSignal prompts you to “Say the name.”
3.
Speak clearly and say the full name of the person you want
to call, exactly as it is entered in your contact list.
If VoiceSignal does not recognize the name you said, a
choice list of up to three names appears in the display, and
VoiceSignal prompts you with “Did you say look up” followed
by the first name on the list.
Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
the list. (For more information, refer to “Confirmation” on
page 89.)
• To say the name again, press the Yes soft key in the “Try again?”
screen.
• To exit VoiceSignal without dialing, press
.
5. The contact information for the name you selected appears
in the display.
4.
Keypad Methods
Find by Name
If you have stored a named contact in your Contacts list, Find lets
you locate the entry quickly.
Understanding Your Contacts
36
1.
In Standby mode, press the Menu soft key and select
Contacts. The Contacts screen appears in the display with
an alphabetical list of Contacts showing.
2.
Select the Search field and enter the first few characters of
the name of the contact as it appears in your Contacts list.
Example: If you saved a contact name as “Amy Smith”, begin your search for
that contact by pressing
for “A”.
Note: As you enter letters, the entry names of the closest matches (thus far)
appear in the display.
3.
When the desired Contacts entry is listed in the display,
select it. Then, do one of the following
• To dial the number associated with the named Contact, tap the
entry, then select
➔ Voice Calls.
• To change the information about the contact, press the Edit soft
key.
Group
2.
Press the Down arrow button at the top right corner of the
screen. The Groups screen appears in the display.
3.
Select the group you wish to browse. The selected Group
list appears in the display.
Highlight the desired Contacts entry, then do one of the
following:
• To delete the selected contact from the Group, press the Remove
member soft key. (Does not apply to the General group.)
• To add an existing contact entry to the selected Group, press the
Add member soft key.
• To change the name of the Group, press the Rename soft key.
• To delete the Group, press the Erase soft key.
5. Select the desired option to enter that option’s sub-menu.
4.
Editing an Existing Contact Entry
Once stored in the Contacts, an entry can be changed quite
easily.
1.
Find the desired entry in the Contacts list. (For more
information, refer to “Finding a Contacts Entry” on
page 36.)
2.
Press the Edit soft key. The Edit Contact screen appears in
the display with the contact name highlighted.
3.
Highlight a number stored in this contact entry.
4.
To backspace and delete numbers, press
This option lets you find a Contacts list entry with a specific
Group name.
1.
37
In Standby mode, press the Menu soft key and select
Contacts. The Contacts screen appears in the display with
an alphabetical list of Contacts showing.
.
5.
6.
To clear all numbers in the highlighted field, press and hold
.
When you’re finished editing the entry, press the Done soft
key, then press the Save soft key.
Adding Pauses to Contacts Numbers
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
• Wait — A hard pause stops the calling sequence until further input
from you.
• 2-Sec Pause — A two-second pause stops the calling sequence for
two seconds and then automatically sends the remaining digits.
Tip: You can enter multiple two-second pauses to extend the length of a
pause. For example, two consecutive two-second pauses cause a total
pause time of four seconds.
2.
Press the Add Pause soft key.
The following menu options appear in the display:
• Wait — a hard pause (awaits input from you).
• 2-Sec Pause — a two-second pause.
3. Select the pause option of your choice to enter the
highlighted pause into your number sequence.
4.
Press the Add To Contacts soft key. The Add To Contacts
screen appears in the display showing the following
options:
• Add New Contacts — Lets you create a new Contacts entry.
• Update Existing — Lets you add the selected number to an
existing Contacts entry.
For more information on saving the number, see “Saving a
Number from a Call” on page 34.
Add Pauses to an Existing Contacts Entry
1.
Find the desired entry in the Contacts list. (For more
information, refer to “Finding a Contacts Entry” on
page 36.)
Note: Keep in mind that pauses count as digits towards the 32-digit
maximum.
2.
Tap the Edit soft key. The Edit Contact screen appears in
the display with the contact name highlighted.
Store Pauses in a New Contacts Entry
3.
Highlight a number stored in this contact entry.
4.
Press the Add Pause soft key. The following menu options
appear in the display:
1.
In Standby mode, tap Dialer and enter the number you
wish to store (such as your bank’s teleservice number).
Understanding Your Contacts
38
• Wait — a hard pause (awaits input from you).
• 2-Sec Pause — a two-second pause.
5. Select the pause option of your choice to enter the
highlighted pause into your number sequence.
6.
When you’re finished entering pauses, tap Done ➔ Save to
save your changes to the number in your Contacts list.
Add a Number or Email Address to an Existing Entry
1.
Find the desired entry in the Contacts list. (For more
information, refer to “Finding a Contacts Entry” on
page 36.)
2.
Tap the Edit soft key. The Edit Contact screen appears in
the display with the contact name highlighted.
3.
Highlight a number field or the Email field in this Contacts
entry.
4.
Enter the phone number or Email address for the new
Contacts entry.
5.
Tap Done to add the number or Email address to the
existing entry.
Edit an Existing Email Address
1.
39
Find the desired entry in the Contacts list. (For more
information, refer to “Finding a Contacts Entry” on
page 36.)
2.
Tap the Edit soft key. The Edit Contact screen appears in
the display with the contact name highlighted.
3.
Highlight the Email field (labeled with the @ symbol).
Use the keypad to edit the Email address. (For more
information, refer to “Entering Text” on page 43.)
• To insert the @ symbol, tap the 1 key or tap Symbols and select
the @ from the options.
– Enter the remainder of the Email address using the keypad. (For more
information, refer to “Entering Text” on page 43)
• To add the domain type to the end of the Email address, do the
following:
– Tap the Shortcuts soft key. A pop-up menu appears in the display.
– Select the desired domain type (such as, .com, .net, .org .gov) to add to
the Email address.
5. Tap Done ➔ Save to save your changes.
4.
Speed Dial Numbers
4.
You can assign and change Speed
Dial numbers for Contacts entries.
Assigning a Speed Dial Number
1.
In Standby mode, tap the Dialer
soft key, then tap the Favorites
button (
). The Favorites list
appears in the display.
2.
Select a Speed Dial number.
The Contacts screen appears in
the display.
3.
Find and select a Contact entry.
(For more information, refer to
“Finding a Contacts Entry” on
page 36.) A dot appears in the
selected Contact’s check
circle.
Tap the Add soft key. You are
returned to the Favorites
screen with the newly assigned
Contact showing.
Changing Speed Dial Numbers
Use this option to change a speed dial number in your Contacts
list.
1.
In Standby mode, tap the Dialer soft key and tap
Favorites screen appears.
2.
Tap Change Order and drag the Contact to the desired
speed dial number.
Understanding Your Contacts
. The
40
Removing Speed Dial Numbers
1.
Use this option to remove a speed
dial number in your Contacts list.
1.
In Standby mode, press the
Dialer soft key and tap
.
The Favorites screen appears.
2.
Tap Remove, then tap the
Contact Remove button (
then tap Remove again.
),
Renaming a Contacts
Group
In Standby mode, press the Menu soft key and select
Contacts. The Contacts screen appears in the display with
an alphabetical list of Contacts showing.
Press the Down arrow button at the top right corner of the
screen. The Groups screen appears in the display.
• General
• Family
• Friends
• Colleague
• Business
3. Press the Rename soft key.
2.
4.
Select the Group (other than No Group) that you want to
rename, then press the Rename soft key.
5.
The Rename Group text entry screen appears in the display.
The current name of the selected Group populates the text
field.
6.
Enter a new Group name using the keypad. (For more
information, refer to “Entering Text” on page 43.)
7.
Press the Save soft key to save the changed group name.
Use this option to rename a Group in your Contacts list.
Deleting a Contacts Entry
1.
41
Find the desired entry in the Contacts list. (For more
information, refer to “Finding a Contacts Entry” on
page 36.)
2.
Tap the Erase soft key.
3.
Do one of the following:
• From the list of Contacts, tap Erase, then tap the erase icon to the
right of the contact you wish to delete, then tap Erase again.
• From a specific Contact, tap Erase. The phone prompts you to
confirm the deletion.
Sending a Contacts Entry
Use the Send Name Card option to send one or more selected
Contacts entries to another, compatible phone or other device
over a Bluetooth connection.
1.
Find and highlight the desired entry in the Contacts list.
(For more information, refer to “Finding a Contacts Entry”
on page 36.)
2.
Tap the Send Name Card soft key. The Select to send screen
appears in the display.
3.
Select a Contact and press the Send soft key. A list of
Bluetooth-trusted devices appear in the display, showing
only devices that can receive a name card.
4.
Select the receiving device by pressing and dragging it
onto the Bluetooth search icon in the center of the display.
When you have finished, the receiving device prompts you
to connect to the sending device.
5.
Tap Yes. Your phone automatically connects with the other
device and sends the selected Contact entries.
Note: For information on turning off the Bluetooth connection, see
“Bluetooth” on page 92.
Memory Status
Use the Memory sub-menu to view the amount of Contacts
entries you have stored, as well as the remaining memory.
1.
In Standby mode, press the Menu soft key and select
Contacts. The Contacts screen appears in the display.
2.
Press the More soft key, then select Memory status. The
amounts of memory used and remaining for Contacts
entries appear in the display.
Understanding Your Contacts
42
Section 6: Entering Text
This section details how to select the type of text entry screen
(phone-style touch keypad, QWERTY touch keypad, or divided or
full-screen handwriting recognition panel). This section also
describes how to select the desired text entry mode when using
the phone-style touch keypad or the QWERTY keyboard-style
touch keypad.
Built-in QWERTY Keypad
Changing Text Entry Screens
Phone-Style (3X4) Touch Keypad
This is the default text entry screen
for most features and functions that
require you to enter text, numbers,
and/or characters (such as
punctuation and polarity signs.)
You can change your settings in any
screen where you enter text, and
you can also access the settings by
selecting Menu ➔ Messaging ➔
Message Settings ➔ Keypad / Entry
Mode.
43
Your device also has a keyboard-style touch keypad, commonly
called QWERTY, that you can access by doing the following:
1.
From the Phone Touch Keypad screen or from either of the
Handwriting Recognition screens, press the down arrow
button (
) (at the upper right corner of the screen). The
following options appear in the display:
• 3X4 Keypad — Displays the phone-style touch keypad.
• QWERTY — Displays the keyboard-style touch keypad, in
landscape mode.
• Handwriting box — Displays the divided text entry screen with the
handwritten text entry field at the bottom. Recognized text appears
in the upper field.
• Handwriting full screen — Displays the full-screen handwritten
text entry field. Both handwritten text and the recognized text
appear in the same field.
2. Select QWERTY. The keyboard-style touch keypad appears
and the display automatically rotates to show information
in a wider, landscape format.
Using the QWERTY keypad, you can type letters, numbers,
punctuation, and other special characters into text entry fields or
other applications simpler and faster than using the phone-style
keypad.
Accessing the Divided Handwriting Recognition Screen
The divided Handwriting
Recognition screen offers separate
message text (upper) and dedicated
handwriting (lower) fields.
1.
From the Phone Touch
Keypad screen or from the
full-screen Handwriting
Recognition screen, press the
down arrow button (
) (at
the upper right corner of the
screen), then select the first
Handwriting box option.
2.
From the QWERTY Touch
Keypad screen, press
Note: Your phone’s Browser function requires you to use the QWERTY
keypad. Other functions requiring text entry (such as, Messaging and
Memo Pad) accept text entry from whichever keypad you prefer.
Changing Text Entry Screen Using QWERTY Keypad
䊳
From the QWERTY touch keypad, change to another text
entry screen by pressing one of the following keys:
3X4 Keypad — 4X3 (phone-style) touch keypad
Handwriting box — Divided handwriting recognition screen
Handwriting Recognition Screens
.
Accessing the Full-Screen Handwriting Recognition Screen
The full-screen Handwriting Recognition screen offers an
integrated message text and handwriting input field.
䊳
From the Phone Touch Keypad screen or from the fullscreen Handwriting Recognition screen, press the down
arrow button (
) (at the upper right corner of the
screen), then select the first Handwriting full screen option.
Your device also can recognize print handwriting. Just print your
text, and your device translates it to text in a screen font.
Entering Text
44
Entering Text Using Handwriting Recognition Screens
45
1.
Using a stylus, print your text in the handwriting entry field.
The phone replaces your handwriting with printed text.
2.
To enter letters, press
3.
To enter numbers and
symbols, press
then
print numbers and/or
symbols.
4.
To enter a space, press
.
5.
To move to a new line, press
.
6.
To delete text, press
7.
When you are finished writing
your text, press the Done soft
key to save your writing.
8.
To correct any handwriting
recognition errors, press the down arrow (at the upper
right corner of the screen), then select 3X4 Keypad or
QWERTY.
then print words.
Changing the Text Entry Mode
Text messages can be made up of alphabetical characters,
numbers, and symbols. You can use the following text entry
modes to simplify text entry:
• Abc — Enter letters, numbers, and symbols by repeatedly pressing
each phone key until the desired character (as shown on the key)
appears in the display or by using the QWERTY keypad. ABC mode
letter options are:
– Abc — Enter initial capital letters (indicated by
on keys).
– ABC — Enter all upper case letters (indicated by
or
on
keys).
– abc — Enter all lower case letters (indicated by
or
on
keys).
.
Note: T9 Word does not support the QWERTY keypad or Handwriting
Recognition screens, which do not need this function.
• T9 Word — Press each phone key only once to enter the letter of the
word that you’re spelling. T9 WORD mode letter options are:
on keys).
on keys).
on keys).
• 123 — Enter numbers by pressing the corresponding keys on the
phone keypad or the QWERTY keypad (indicated by
or
on
keys).
– T9 Word — Enter initial capital letters (indicated by
– T9 WORD — Enter all upper case letters (indicated by
– T9 word — Enter all lower case letters (indicated by
Tip: Using the QWERTY keypad or the Handwriting Recognition screens, also
use 123 mode to enter numbers and symbols into your message simply
by pressing the keys labeled with the symbols you want.
Changing QWERTY Keypad Text Entry Mode
䊳
• Symbols — Using the phone keypad, enter a symbol into your
message by pressing the key labeled with the desired symbol
(indicated by
or
on keys).
The current text entry mode (T9 Word, abc, Abc, ABC, 123, or
Symbols) is indicated on the touch keys. To change the text
entry mode, do the following:
Changing 3X4 Keypad Text Entry Mode
1.
• Abc
• abc
• ABC
• T9Word
• T9word
• T9WORD
• 123
2. Select the desired text entry mode.
3.
Changing Handwriting Recognition Screen Text Entry
Mode
䊳
While composing a text message or memo, press the Entry
Mode soft key.
The following options appear in the display:
While composing a text message or memo, to change text
entry mode:
• To select abc mode, press .
– To toggle between abc and ABC modes, press .
• To select 123-Symbols mode, press
or .
– To select additional Symbols mode, press .
While composing a text message or memo, to change text
entry mode:
• To select Abc mode, press
.
• To select 123 mode, press
.
Using T9® Mode (Phone Keypad Only)
T9 Word recognizes commonly used words for the numeric
sequence of key presses and inserts the word into your message.
T9 Word is much faster than the traditional method of text entry
(Abc) and requires only one key press per letter of the word that
you’re spelling.
1.
While composing a text message, press the Entry Mode
soft key, then select T9Word.
To change to Symbols mode, press the Symbols soft key.
Entering Text
46
– Pause briefly and the displayed letter is accepted and inserted into your
message.
– Press
to enter a space and press
to enter a period.
• For practice, enter the word “Samsung” by pressing each of the
following keys only once:
S
A
M
S
U
N
T9 Word recognizes that the most commonly used word for the
numeric sequence you just entered is “Samsung.”
If more than one word shares the same numeric sequence, T9 Word
provides the most commonly used word.
Note: To enter a space, press
. To enter a period, press
. These
key functions apply to both T9 Word and Abc modes. For other
symbols, see “Entering Symbols” on page 47
Using Abc Mode
While composing a text message, do one of the following:
• Using the phone keypad, press the Entry Mode soft key, then
select Abc.
• Using the QWERTY keypad, press
.
• Using either Handwriting recognition screen, press
.
2. Enter letters while in Abc mode by using one of following:
• Using the phone keypad:
– Press the key repeatedly until the desired letter appears in the display
(such as, press
once for “G” and twice for “H”).
1.
47
• Using the QWERTY keypad, press the key labeled with the desired
letter (such as, press
for “G” and
for “H”).
• Using either Handwriting recognition screen, use a stylus to print
the desired letters.
G
Entering Numbers
Enter numbers into a text message while in 123 mode.
While composing a text message, do one of the following:
• Using the phone keypad, press the Entry Mode soft key, then
select 123.
• Using the QWERTY keypad, press
or
.
• Using either Handwriting recognition screen, press
.
2. Enter numbers while in 123 mode by using one of the
following:
• Using the phone keypad or the QWERTY keypad, press the keys
labeled with the desired numbers.
• Using either Handwriting recognition screen, use a stylus to print
the desired numbers.
1.
Entering Symbols
Enter symbols (such as “@” or “%”) into a text message while in
Symbols mode.
䊳
While composing a text message, enter symbols by using
one of following keypads:
• Using the phone keypad:
– Press the Symbols soft key. The first of four symbol screens appears in
the display.
– Use the Prev and Next soft keys to page through the other symbols, if
desired.
– Press the key labeled with the symbol that you wish to enter.
– Repeat these steps to insert additional symbols into your message.
• Using the QWERTY keypad:
– Press
or
.
– Press the key(s) labeled with the corresponding symbol(s) that you wish
to insert into your message.
• Using either Handwriting recognition screen:
– Press
.
– Use a stylus to print the desired numbers.
Entering Text
48
Section 7: Messaging
This section explains how to create, send, receive, and view
different types of messages. This section also describes the
features and functionality associated with messaging.
Creating and Sending New Messages
This section guides you through procedures for creating and
sending text and picture messages.
Creating and Sending a Text Message
1.
In Standby mode, press the
Messaging soft key, then
select Send Message ➔ Text
Message. The Text Msg
screen appears in the display
showing the To list.
Tip: You can also access Messaging by
pressing the Menu soft key and
selecting Messaging.
2.
49
Add the destination address
for your message by selecting
contacts and/or entering
number(s) or Email
address(es) of message recipient(s):
• To select a mobile number or Email address using your Contacts
list, press the Contacts soft key. The Contacts screen appears in
the display. For more information, refer to “Finding a Contacts
Entry” on page 36.
Select a Contact entry. A check mark appears in the entry’s check box.
To add the selected Contact to the To list, press the Add soft key. The
Text Msg screen appears in the display showing the populated To list.
• To enter recipient phone number(s) or Email address(es), select an
empty To field. The phone-style touch keypad screen appears in
the display in 123 mode.
– To enter a phone number, press the appropriate keys in the proper
sequence, then press the Done soft key. You are returned to the To list.
– To enter an Email address, change the text entry mode from 123 to
abc and enter the address. (For more information, refer to “Entering
Text” on page 43.) To add a domain to the address (such as .net or
.com) press the Shortcuts soft key. When the address is complete,
press the Done soft key. You are returned to the To list.
• To select members of a Contacts Group as recipients, press the
Group soft key. The Groups screen appears in the display.
– Select the desired Group. The selected Group List screen appears in the
display.
– Select individual Contacts or select Select All. Check marks appear in
the check boxes for the selected Contacts.
– Press the Add soft key. You are returned to the To list.
• To select a phone number from a Recent Call as a recipient, press
the Recent Calls soft key. The Calls screen appears in the display.
– If desired, press the down arrow key in the upper right corner of the
screen, then select All, Incoming, Outgoing, or Missed calls.
– Select individual calls or select Select All. Check marks appear in the
check boxes for the selected calls.
– Press the Add soft key. You are returned to the To list.
3. When you are finished
addressing your message,
press the Next soft key. The
phone-style touch keypad
screen appears in the display
in Abc mode.
5.
Before sending your text message, you can set message
send options by pressing the More soft key and select
Sending Options. (For more information, refer to “Message
Sending Options” on page 54.)
6.
To send your finished message, press the Send soft key.
Creating and Sending a Picture Message
1.In Standby mode, press the Messaging soft key, then select
Send Message ➔ Picture Message. The Picture Msg screen
appears in the display showing the To list.
Tip: You can also access Messaging by pressing the Menu soft key and
selecting Messaging.
Address your message as you would a Text message (see
“Creating and Sending a Text Message” on page 49), with
one addition:
• To send this message to your Online Album, press the Online
Album soft key. You are returned to the To list.
3. When you are finished addressing your message, press the
Next soft key. The Picture Msg fields screen appears in the
display.
2.
Note: You can use any of the device’s four
text entry screens to enter your
message text. (For more information,
refer to “Changing Text Entry
Screens” on page 43.)
4.
Enter the text for your
message. (For more
information, refer to “Entering
Text” on page 43.)
• To use pre-composed text, press the Add Quick Text soft key.
Messaging
50
4.
If desired, select the Subject
field. The phone-style touch
keypad screen appears in the
display in Abc mode.
You are returned to the Picture Msg screen which is
populated with the selected photo in the Picture field.
8.
If desired, you can add a sound file to accompany the
picture by selecting the Sound field. The My Sounds screen
appears in the display listing available sound files.
• To add an existing sound file, select the preferred file and press the
Send soft key.
• To create a new sound file, press the Record New soft key. (For
more information, refer to “Voice Memo” on page 86.)
You are returned to the Picture Msg screen which is
populated with the selected sound file in the Sound field.
9.
Before sending your Picture message, you can set
message send options by pressing the More soft key and
select Sending Options. (For more information, refer to
“Message Sending Options” on page 54.)
Note: You can use any of the device’s four
text entry screens to enter your
message text. (For more information,
refer to “Changing Text Entry
Screens” on page 43.)
Enter the Subject text. (For
more information, refer to
“Entering Text” on page 43.)
• To use pre-composed text, press
the Add Quick Text soft key.
6. If desired, repeat steps 4 and 5 for the Text field.
5.
7.
51
To add a picture to the message, select the Picture field.
You are prompted to Take a Photo or to add a photo from
the My Images folder.
• To activate the phone’s camera and take a new picture, select Take
Photo. (For more information, refer to “Camera-Camcorder”
on page 63.) Once you’ve take a photo, press the Send soft key.
• To access your photo gallery, select My Images. With pictures in
the gallery, a list of thumbnail images appears in the display. Select
the desired photo and press the Send soft key.
10. To preview your Picture message as the recipient(s) will
see it, press the Preview soft key.
• To make changes to your message, press the Back soft key.
11. To send your finished message, press the Send soft key.
Send Picture Messages in Camera Mode
Picture messages can be sent from your phone’s camera to
recipients with compatible phones or devices. You can even
accompany a picture with a voice memo or preloaded sound file.
Tip: You can send a Picture message to up to ten recipients. Enter each
recipient’s address or phone number in a separate To field of the Picture
Msg screen.
1.
In Standby mode, press and hold the Camera key (
The camera viewfinder screen appears in the display.
2.
Using the display as a viewfinder, when the image that you
wish to send appears in the display, press the Camera key
(
) to take a picture.
Press the Send soft key. If necessary, the device resizes
your picture for sending, then the Picture Msg screen
appears in the display showing the To list.
Address your message as you would a Text message (see
“Creating and Sending a Text Message” on page 49), with
one addition:
• To send this message to your Online Album, press the Online
Album soft key. You are returned to the To list.
5. When you are finished addressing your message, press the
Next soft key. The Picture Msg fields screen appears in the
display with your new picture populating the Picture field.
4.
6.
1.In Standby mode, press the Messaging soft key, then select
Send Message ➔ Video Message. The Video Msg screen
appears in the display showing the To list.
).
Note: For more information about using the camera feature in your phone,
see “Camera-Camcorder” on page 63.
3.
Creating and Sending a Video Message
To complete and send your message, refer to steps 4 – 11
of “Creating and Sending a Picture Message” on page 50.
Tip: You can also access Messaging by pressing the Menu soft key and
selecting Messaging.
Address your message as you would a Text message (see
“Creating and Sending a Text Message” on page 49), with
one addition:
• To send this message to your Online Album, press the Online
Album soft key. You are returned to the To list.
3. If desired, select the Subject
field. The phone-style touch
keypad screen appears in the
display in Abc mode.
2.
Note: You can use any of the device’s four
text entry screens to enter your
message text. (For more information,
refer to “Changing Text Entry
Screens” on page 43.)
4.
Enter the Subject text. (For
more information, refer to
“Entering Text” on page 43.)
Messaging
52
5.
6.
7.
• To use pre-composed text, press the Add Quick Text soft key.
If desired, repeat steps 3 and 4 for the Text field.
To add a video clip to the message, select the Video field.
You are prompted to Take a Video or to add a video clip
from the My Videos folder.
• To activate the phone’s camcorder and record a new video clip,
select Take Video. (For more information, refer to “CameraCamcorder” on page 63.) Once you’ve recorded a video clip,
press the Send soft key.
• To access your photo gallery, select My Videos. With video clips in
the gallery, a list of thumbnail images appears in the display. Select
the desired video clip and press the Send soft key.
You are returned to the Video Msg screen which is
populated with the selected video clip in the Video field.
Before sending your Video message, you can set message
send options by pressing the More soft key and select
Sending Options. (For more information, refer to “Message
Sending Options” on page 54.)
To preview your Video message as the recipient(s) will see
it, press the Preview soft key.
• To make changes to your message, press the Back soft key.
9. To send your finished message, press the Send soft key.
Send Video Messages in Camcorder Mode
Video messages can be sent from your phone’s camcorder to
recipients with compatible phones or devices.
Tip: You can send a Video message to up to ten recipients. Enter each
recipient’s address or phone number in a separate To field of the Video
Msg screen.
1.
In Standby mode, press the Camera key (
). The
camera viewfinder screen appears in the display.
2.
Press the Mode soft key. The camcorder viewfinder screen
appears in the display.
3.
Press the Recording Mode soft key. Select the Video Msg
option.
Note: For more information about setting camcorder options in your phone,
see “Camcorder Options” on page 73.
4.
Using the display as a viewfinder, when the image that you
wish to send appears in the display, press the Camera key
(
) to record a video. The time counter at the bottom
of the Camcorder viewfinder screen indicates recording
time in seconds.
5.
To end your video clip, press Stop (
8.
53
).
Note: For more information about using the camcorder feature in your
phone, see “Camera-Camcorder” on page 63.
6.
Press the Send soft key. If necessary, the device resizes
your picture for sending, then the Video Msg screen
appears in the display showing the To list.
Address your message as you would a Text message (see
“Creating and Sending a Text Message” on page 49), with
one addition:
• To send this message to your Online Album, press the Online
Album soft key. You are returned to the To list.
8. When you are finished addressing your message, press the
Next soft key. The Video Msg fields screen appears in the
display with your new picture populating the Video field.
7.
9.
To complete and send your message, refer to steps 3 – 9
of “Creating and Sending a Video Message” on page 52.
Message Sending Options
You can set priority, validity, and other options before you send a
message. Which options appear in the Sending Options list
depends on what type of message you have composed and what
message field you have highlighted.
1.
After you’ve composed a Text, Picture, or Video message,
press the More soft key and select Sending Options. The
following options appear in the display:
• Priority Level — Lets you
assign a High, Normal, or Low
(pic/video messages only) priority
to the message.
• Validity Period — Lets you
select a Date and Time when
this message will no longer be
available to the recipient. When
your selected date and time
pass, your message is recalled.
• Enhanced Delivery Ack /
Delivery Ack — Set to On to be
alerted when your message is
received by the addressee.
• Deferred Delivery Time — Lets
you set a Date and Time when this message will be delivered.
2. Select any desired options and values for those options.
3.
To save your settings, press the OK soft key. You’re
returned to the message creation screen.
Receiving New Messages
When you receive a message in Standby mode, one of the
following occurs:
• If Auto View and Auto Scroll are both set to On — An alert sounds
(unless turned off) and the message text automatically appears in the
Messaging
54
display and scrolls slowly to the end of the message. (For more
information, refer to “Message Settings” on page 58.)
• If Auto View is set to Off — An alert
sounds (unless turned off) and a New
Message notification appears in the
display along with the closed envelope
icon (
). The date and time of the
message and the following options
also appear in the display:
– View Now — Opens the message
where you have the option to Reply,
Forward, Erase, Add To Contacts,
Lock/Unlock, or Save Quick Text,
Message Info.
– View Later — Closes the popup and
saves the message to your inbox
where you can view it later.
Select the desired option.
Receive Messages While in a Call
When you receive a message while in a call, one of the following
occurs:
• If Auto View and Auto Scroll are both set to On — The message text
automatically appears in the display and scrolls slowly to the end of
55
the message. (For more information, refer to “Message Settings” on
page 58.)
• A New Message notification appears in the display along with the
closed envelope icon (
). The date and time of the message and
the following options also appear in the display:
– View Now — Opens the message where you have the option to Reply,
Forward, Erase, Add To Contacts, Lock/Unlock, or Save Quick Text,
Message Info.
– View Later — Closes the popup and saves the message to your inbox
where you can view it later.
Select the desired option.
Voicemail
Voicemail allows callers to leave voice messages in your voice
mailbox, and lets you review, play, and delete your voice
messages any time you are in your Carrier’s network coverage
area.
Voice Mail Setup
Before callers can leave voice mail messages, you must first set
up your account. For more information, refer to “Setting Up Your
Voicemail” on page 7 and to “Message Settings” on page 58.
Checking your Voicemail
1.
In Standby mode, change to Dialer mode, then press and
hold
until you’re connected to your Wireless
Carrier’s voicemail system. A recorded message prompts
you for a password.
2.
Enter your password, then follow the recorded prompts, to
listen to your voice message(s), change administrative
options, and so on.
Tip: You can also access your voice mail by selecting an entry in the
Voicemail folder.
Message Folders
Inbox
Received messages of all types (except Voicemail) are stored in
the Inbox.
1.
In Standby mode, press the Messaging soft key, then select
Inbox, to open the Inbox folder.
2.
To delete one or more messages, press the Erase soft key,
select the message(s) to be deleted, then press the Erase
soft key again.
3.
To view a message, select it, then do one of the following
• To compose and send a message to the sender of the message,
press the Reply soft key, then select the type of message you wish
to compose: Text, Picture, or Video.
• To forward the message to other recipients, press the Forward soft
key.
• To delete this message, press the Erase soft key. You are prompted
to verify the erasure. To erase this message, press the Yes button.
• To access other options, press the More soft key. The following
options appear in the display:
– Add To Contacts — Lets you add the sender’s number or Email
address to your Contacts list.
– Lock / Unlock — Blocks or allows erasure of the message.
– Save Quick Text — Saves the message text as a Quick Text entry.
– Message Info — Lets you display status information about a
message.
Select an option to perform the function for that option.
Messages and Lock Mode
Your phone can still receive messages while in Lock Mode. The
time and date of the message appear in the display, but you
cannot access the message until you enter the lock code. (For
more information, refer to “Lock Phone” on page 117.)
Outbox
Your phone stores outgoing messages in the Outbox, regardless
of whether the message was successfully sent to, or received by,
the addressee.
Tip: Verify whether and when a message or Email was successfully received
by enabling the Delivery Ack message send option. (For more
information, refer to “Send Picture Messages in Camera Mode” on
page 51.)
Messaging
56
1.
2.
3.
57
In Standby mode, press the Messaging soft key, then select
Outbox. A list of your outgoing messages appears in the
display.
To delete one or more messages, press the Erase soft key,
select the message(s) to be deleted, then press the Erase
soft key again.
To view a message, select it, then do one of the following
• To resend a message to the original recipient(s), press the Resend
soft key.
• To forward the message to other recipients, press the Forward soft
key.
• To delete this message, press the Erase soft key. You are prompted
to verify the erasure. To erase this message, press the Yes button.
• To access other options, press the More soft key. The following
options appear in the display:
– Add To Contacts — Lets you add the sender’s number or Email
address to your Contacts list.
– Lock / Unlock — Blocks or allows erasure of the message.
– Save Quick Text — Saves the message text as a Quick Text entry.
– Message Info — Lets you display status information about a
message.
Select an option to perform the function for that option.
Drafts Folder
Messages in the Drafts folder are those that have been
composed but never sent. You can return to the Drafts folder at
any time to view, edit, or send a draft message.
1.
In Standby mode, press the Messaging soft key, then select
Drafts. A list of your draft messages appears in the display.
2.
To delete one or more messages, press the Erase soft key,
select the message(s) to be deleted, then press the Erase
soft key again.
3.
To view a message, select it, then do one of the following
• To send a message to the original recipient(s), press the Send soft
key.
• To change the message and/or the recipients, press the Edit soft
key.
• To delete this message, press the Erase soft key. You are prompted
to verify the erasure. To erase this message, press the Yes button.
• To access other options, press the More soft key. The following
options appear in the display:
– Add To Contacts — Lets you add the sender’s number or Email
address to your Contacts list.
– Lock / Unlock — Blocks or allows erasure of the message.
– Save Quick Text — Saves the message text as a Quick Text entry.
– Message Info — Lets you display status information about a
message.
Select an option to perform the function for that option.
Voicemail
New voice messages in your voice mailbox are logged in the
Voicemail folder of the Messaging menu. Open the Voicemail
folder to view the Callback # (if available), Urgency, and other
details of new voicemail messages.
1.
In Standby mode, press the Messaging soft key, then select
Voicemail. A Voicemail status screen indicating the number
of new messages in your voice mailbox, their urgency, and
any callback numbers appears in the display.
2.
Press the Call soft key or press
to call your voice
mailbox and listen to your voice messages.
Note: You can, in Standby mode, also tap Dialer, and then press and hold
to dial your voice mailbox.
Erasing Messages
You can erase all of the messages in each/all of your message
folders from one convenient location.
Note: This function erases all messages in a selected message folder or in
all message folders. To delete a single message, from the Messaging
menu, select the message folder where the message to be deleted is
stored, then press the Erase soft key, select the message in the list,
and press the Erase soft key again.
In Standby mode, press the Messaging soft key, then select
Erase Messages. The following options appear in the
display:
• Inbox — Lets you delete all messages from your Inbox.
• Outbox — Lets you delete all messages from your Outbox.
• Drafts — Lets you delete all draft messages from the Drafts folder.
• All Messages — Lets you delete all messages from all message
folders.
2. Select the folder(s) containing the messages that you wish
to delete. You are prompted to confirm the erasure of all
messages in the folder(s).
1.
3.
To cancel deleting any messages, press the No soft key. To
delete all messages from the selected folder, press the Yes
soft key.
Message Settings
The Message Settings let you customize messaging to suit your
preferences.
1.
In Standby mode, press the Messaging soft key, then select
Message Settings. The Message Settings screen appears in
the display listing the following options:
• Auto Save/Auto Erase — Lets you set your device messaging to:
– Automatically save unsent messages to the Outbox folder, to discard
them, or to prompt you to select to save/discard unsent messages.
Messaging
58
– Automatically erase/or prompt you to delete the oldest read messages
after message memory is full and new messages are received.
• Quick Text — Lets you change pre-composed text or compose
text for addition to your outgoing messages.
• Voicemail Number — Lets you update your Voicemail access
number.
• Keypad/Entry Mode — Lets you set the following:
– Default Keypad (3X4 Keypad, QWERTY, Handwriting box, Handwriting
full screen) for entering message text.
– Default text Entry Mode [Abc/abc/ABC (alphabetically), T9 Word, or
123 (numerical)] for composing message text.
• Callback Number — Lets you disable (Off), enable (On), and
update the callback number that can be inserted in outgoing
messages.
• Signature — Lets you disable (Off), enable (On), and update the
text signature that can be inserted in outgoing messages.
• Reminder — Lets you set the message receipt reminder to play
Once, Every 2 Minutes, Every 15 Minutes, or not to play (Off).
• Text Msg View — Lets you set messaging to do the following:
– Auto View — Set your device to Display your incoming text messages
automatically when they’re received or to prompt you whether to view
them now or later.
– View Mode — Set device messaging to display incoming text
messages one at a time or to display text messages (outgoing and
incoming) in a chat-style view.
59
• Picture/Video Msg Download — When set to On, your device
automatically downloads Picture and Video messages to your Inbox
folder when they are received. When set to Off, you are prompted
to select whether to download the message now or later.
2. Select any desired options and settings for those options.
3.
To save your settings, press the OK soft key. You are
returned to the Message Settings menu.
Section 8: easyedgeSM
This section explains the easyedgeSM features where users can
download multimedia, applications, games, and check news and
sports.
2.
Tap the Left navigation soft
key to select the my stuff tab.
You can use the navigation
soft keys to browse or search
for, purchase, and download
applications.
3.
Tap the OK soft key to select
an application on your phone
that you wish to launch.
Finding Applications
With easyedgeSM, you can download
full featured applications over the
air including games, personalized
ring tones, pictures, and more.
1.
In Standby mode, tap the
Menu soft key, then select
easyedge.
The easyedgeSM screen
appears in the display with
Note: Some applications do not support the
touch screen. Refer to the
instructions for particular
applications.
the easyedge shop tab
highlighted.
4.
Press the
key to exit the menu.
easyedgeSM
60
Section 9: Browser
This section outlines how to launch Browser, how to navigate to
other pages on the web, and how the keys on the keypad are
used with the web application. Additionally, links to other sites
are briefly discussed.
The Browser screen appears in the display in landscape
mode. A list of categories (each representing one or more
web sites) appears in the display.
Browser Features
With Browser, you can conveniently surf the web and download
ringtones and wallpapers using your phone. Each time you
launch Browser, your phone connects to the Internet and the
service indicator icon with a red arrow (
) appears in the
display.
Stored Web Content
Browser ends an Internet connection after a certain period of
inactivity, however some information from your session remains
stored in the phone (if you leave your phone turned on). You can
access this information without reconnecting to the Internet.
However, if you are viewing stored information, and you select a
link to a site that was not accessed in your last session, you
automatically re-connect to the Internet.
Launching Browser
1.
61
In Standby mode, press the Menu soft key, then select
Browser.
2.
Select the desired category, to enter the category list.
Exit Browser
䊳
To exit Browser, press
.
Using Browser
Browser presents on-screen items in any of the following ways:
• Text or numeric input.
Note: When entering text in a web page field, Browser limits you to using the
QWERTY touch keypad.
• Links (embedded in content).
• Numbered options (some may not be numbered).
• Simple text.
You can act upon options or links by selecting them.
Using Links
Links have several purposes, such as jumping to a different
page, to a different site, or even initiating a phone call. Links are
shown inside of brackets ([ ]). You can normally select a link.
Favorites — Displays and lets you select from a list
of web sites you have saved as your favorites.
Add to Favorites — Lets you save the address and
title of the current web page to your favorites list.
Slide — Lets you press and slide the current web
page to view non-displayed portions of the page.
How Browser Buttons Work
Settings — Launches the Browser Settings menu,
letting you customize Browser to suit your needs.
The top and right side of the Browser screen contain control bars. The
following table lists Browser buttons that appear in the control bars
and their functions and the
key.
Press to exit the Browser and return the phone to
Standby mode.
Back — Displays the previously viewed web page,
if any.
Forward — Displays the previously viewed web
page, if any.
Refresh — Reloads and displays the current web
page.
Home — Loads and displays the web page
designated as your “home page”.
Zoom — Lets you enlarge or shrink web pages.
Browser
62
Section 10: Camera-Camcorder
Use your Samsung phone to take full color digital pictures and
videos, display them on your phone’s vivid color display, and
instantly share them with family and friends. It’s fun, and as easy
to use as a traditional point-and-click camera or camcorder. This
section explains how you can do the following:
• Take pictures and videos with your phone’s built-in digital cameracamcorder.
• Send and receive pictures and videos taken with your phone’s cameracamcorder.
• Set the several options associated with the camera-camcorder that
help you take crisp, clear pictures and videos.
Taking Pictures and Videos
Taking pictures videos with the built-in camera-camcorder is as
simple as choosing a subject, pointing the lens (located on the
rear of your phone, at the top), and pressing a button.
Taking Snap Shots (Single Pictures)
To take a single picture using the current camera settings, do the
following:
1.
63
In Standby mode, press and hold the Camera key (
)
on the right side of the phone. The camera viewfinder
screen appears in the display. (For more information, refer
to “Screen Layouts” on page 65)
Note: You can also activate the camera by pressing the Menu soft key, then
select Multimedia ➔ Camera.
2.
Using the display as a viewfinder, point the camera at your
subject.
3.
When the image that you wish to capture appears in the
display, press the Camera key (
).
4.
Do one of the following:
• Press the Save soft key to save the picture to memory.
• Press the Erase soft key to erase the photo.
• Press the Send soft key to email the photo.
• Press Set as Wallpaper to change the background on your device.
5.
To exit the Camera feature, press
.
Tip: You can change a number of the camera’s settings to suit particular
uses for your pictures. For more information, refer to “Camera Options”
on page 68
Taking Multi Shot Pictures
When taking pictures of moving subjects or subjects you cannot
pose, such as children and pets, the camera’s Multi Shot mode
simplifies the process of taking multiple pictures in quick
succession. After taking Multi Shot pictures, the camera
automatically displays thumbnail views of the pictures you have
just taken so you can select the best picture(s) and discard the
rest.
1.
In Standby mode, press and hold the Camera key (
)
on the right side of the phone. The camera view finder
screen appears in the display. (For more information, refer
to “Screen Layouts” on page 65)
• Mosaic — Lets you take a mosaic of 4 or 9 photos with a single
press of the Camera key (
).
• Frame — Lets you temporarily (for this session only) apply one of
the preloaded picture frames in your phone to characterize or
enhance one or more pictures.
3. When you select the Multi option, the following options
appear in the display:
•3
•5
When you select Mosaic, the following options appear in
the display:
•
•
4.
Select the desired number of shots.
The Multi progress bar (
Note: You can also activate the camera by pressing the Menu soft key, then
select Multimedia ➔ Camera.
or
) or the Mosaic icon (
or
)
(which acts as a progress bar while pictures are being
2.
Press the Shooting Mode button. The following options
appear in the display:
• Single — Lets you take a single photo.
• Multi — Lets you take a series of 3 or 5 photos with a single press
of the Camera key (
).
taken) appears in the display.
5.
Using the display as a viewfinder, point the camera lens at
your subject.
Camera-Camcorder
64
Press the Camera key (
) when the image that you
wish to capture appears in the display. The camera takes
multiple pictures in quick succession (Multi) or one each
time you press the Camera key (
) (Mosaic), then the
multiple-photo screen appears in the display.
• To discard the pictures, press the Erase button.
• To set a picture as the Standby mode screen wallpaper, press the
Set as Wallpaper button.
• To send a picture in a picture message, press the Send button
• To save the pictures to memory, press the Save button.
Taking Videos
6.
4.
Press the Camera key (
) when the image that you
wish to capture appears in the display. Recording
continues until you press the Camera key (
) a second
time or until 15 seconds of video has been recorded,
whichever comes first.
• To discard the video clip, press the Erase button.
• To send video in a video message, press the Send button
• To save the video to memory, press the Save button.
Screen Layouts
Camera Screen
To take a video using the current camcorder settings, do the
following:
1.
In Camera mode, press and hold the Camera key (
)
on the right side of the phone. The camera view finder
screen appears in the display.
2.
Press the Mode button. The camcorder view finder screen
appears in the display. (For more information, refer to
“Camcorder Screen” on page 66)
Note: You can also activate the camcorder by pressing the Menu soft key,
then selecting Multimedia ➔ Camcorder.
3.
65
Using the display as a viewfinder, point the camera lens at
your subject.
When you activate your phone’s camera, the second line of the
display is reserved for the current camera resolution setting and
the picture counter. The center of the display shows a viewfinder
image of the subject at which the camera is pointed.
Camera Screen Buttons
Changes the Camera-Camcorder mode to Camcorder.
Lets you set the Camera’s Shooting Mode to Single,
Multi, Mosaic, or Frame.
Lets you set the resolution of your photos between
3Megapixels – 0.3Mmegapixels and Picture ID.
Button/Icon Display
1.
In camera mode, with the buttons and icons appearing in
the display, tap the screen once to hide the Camera icons,
then press the icon bar again to hide the Camera buttons.
2.
In camera mode, with the buttons and icons not appearing
in the display, tap the screen once to display the Camera
icons and buttons.
Camcorder Screen
Lets you select Quality, Self Timer, White Balance, ISO,
Effects, Exposure Metering, and more.
Lets you set the Camera’s Flash to On, Off, or Auto.
Lets you set the Camera’s Focus to Normal or Macro.
Lets you set the Camera to brighten or darken your
photos.
Lets you access the My Images folder.
When you activate your phone’s camcorder, the first line of the
display is shows current camcorder setting icons. The center of
the display shows a viewfinder image of the subject at which the
camcorder is pointed.
Camera-Camcorder
66
Camcorder Screen Buttons
Changes the Camera-Camcorder mode to Camcorder.
Lets you set the Camcorder’s Recording Mode to Normal
or Video Msg.
Lets you set the Camcorder’s resolution to 320x240 or
176x144 (pixels).
Lets you select values for Quality, Self Timer, White
Balance, and Effects.
Lets you set the Camcorder’s Flash to On, Off, or Auto.
Not supported by the Camcorder.
Lets you set the Camcorder to brighten or darken your
videos.
Lets you access the My Videos folder.
67
Button/Icon Display
1. In Camcorder mode, with the buttons and icons appearing
in the display, tap the screen once to hide the Camcorder
icons, then tap the screen again to hide the Camcorder
buttons.
2.
In Camcorder mode, with the buttons and icons not
appearing in the display, tap the screen once to display the
Camcorder icons and buttons.
Saving Pictures and Videos
After you’ve taken a picture or video, you can do any of the
following:
• Save the picture or video by pressing the Save soft key.
A picture is stored in the My Images folder. A video is stored in the My
Videos folder. These folders are part of the phone’s memory and/or
part of an optional Memory Card devoted to storing, browsing, and
viewing saved pictures and videos. (For more information, refer to
“The Photo Gallery” on page 77)
• Send the picture or video to someone else by pressing the Send soft
key.
For a detailed procedure, see “Creating and Sending a Picture
Message” on page 50 or see “Creating and Sending a Video
Message” on page 52.
• Discard the picture or video by pressing the Erase soft key.
Camera Options
The Camera Options let you adjust the default camera settings to
suite available lighting, the subject of the photo, or the purpose of
the photo. To access Camera Options, do the following:
1.
In Standby mode, press and hold the Camera key (
The camera viewfinder screen appears in the display.
2.
Select the any of the following buttons:
).
Mode
• Frame — Lets you temporarily (for this session only) apply one of
the preloaded picture frames in your phone to characterize or
enhance one or more pictures.
2. When you select the Multi option, the following options
appear in the display:
•3
•5
When you select Mosaic, the following options appear in
the display:
Switches to Camcorder mode. The Camcorder view finder screen
appears in the display.
•
Shooting Mode
•
Multi
Multi Shot lets you take multiple pictures in succession at the
touch of a key.
1.
In camera mode, press the Shooting Mode button, then
highlight Multi Shot. The following options pop-up:
• Single — Lets you take a single photo.
• Multi — Lets you take a series of 3 or 5 photos with a single press
of the Camera key (
).
• Mosaic — Lets you take a mosaic of 4 or 9 photos with a single
press of the Camera key (
).
3.
Select the desired number of shots.
The Multi progress bar (
or
) or the Mosaic icon (
or
)
(which acts as a progress bar while pictures are being
taken) appears in the display.
4.
Select the desired option and setting. The related icon
appears in the display.
Camera-Camcorder
68
When you press the Camera key (
), the camera takes
several pictures in rapid succession (Multi), or lets you take
one picture after another (Mosaic).
Frames
Frames lets you temporarily apply one of the preloaded picture
frames in your phone to characterize or enhance one or more
pictures.
Note: The None frame is a blank frame.
1.
2.
In camera mode, press the Shooting Mode button, then
select Frames. A pop-up menu of the available Fun Frames
appears in the display.
Select the Frame you wish to use. The camera screen
appears in the display with your selected Frame in place.
When you take your next picture, the camera includes the
selected Frame in your picture.
Size
Change the size (in bytes) of your pictures by changing the
picture resolution setting.
1.
69
In camera mode, press the Size button. The following
options pop-up:
• 2048x1536 (pixels)
•
•
•
•
•
1600x1200 (pixels)
1280x960 (pixels)
1024x768 (pixels)
640x480 (pixels)
Picture ID — lets you take pictures the correct size and resolution
for Contacts list picture IDs.
2. Select the desired option. You’re returned to the camera
viewfinder screen.
Note: The Size setting affects zoom capabilities. When Size is set to 2048 x
1536, zoom is not available. When Size is set to any value lower than
2048 x 1536, zoom settings 1 – 9 are available.
Settings — Camera Tab
Quality
You can affect how much your photo is compressed, thereby
reducing it’s overall size (not to be confused with its resolution).
1.
In camera mode, press the Settings soft key, then select
Camera Tab ➔ Quality.
2.
Select one of the options: High, Normal, or Economy. You’re
returned to the camera viewfinder screen.
Self Timer
Self Timer lets you delay taking a picture long enough to let you
join others in a picture.
1.
In camera mode, press the Settings soft key, then select
Camera Tab ➔ Self Timer.
The following values appear in the camera screen:
• Off
• 3 Seconds
• 5 Seconds
• 10 Seconds
2. Select the desired Self Timer option. If you select 3, 5, or
10, the Self Timer icon appears in the camera screen in the
display.
When you press the Camera key (
), the countdown
• Daylight — Use this setting when taking pictures in full sun.
• Cloudy — Use this setting when taking pictures in cloudy
conditions.
• Tungsten — Use this setting when taking pictures under
incandescent lights.
• Fluorescent — Use this setting when taking pictures under
fluorescent lights.
Each option, as you highlight it, shows the effects it has on a picture.
2. Select the White Balance you wish to use. The camera
viewfinder screen appears in the display with your
selected White Balance applied.
timer indicates the time remaining before the camera
The next time you press the Camera key (
takes the picture.
camera applies the selected White Balance to your picture.
), the
Effects
Tip: To stop the countdown timer without resetting it, press
.
White Balance
White Balance allows you to adjust picture quality according to
available light.
1.
In camera mode, press the Settings soft key, then select
Camera Tab ➔ White Balance. The following options popup:
• Auto — The camera automatically adjusts picture quality to
available light.
Change the look of your pictures with Effects. Choose from six
available settings such as Gray, Negative, and Sepia. The
selected color effect previews in the display before you take the
picture.
1.
In camera mode, press the Settings soft key, then select
Camera Tab ➔ Effects. The following options pop-up:
Note: Choose Normal to disable Color Effects.
• Normal — Subjects and pictures appear with a normal hue.
Camera-Camcorder
70
• Sketch — Subjects and pictures appear as black and white
outlines.
• Negative — Subjects and pictures appear in inverted colors.
• Sepia — Subjects and pictures appear in a brownish-gray hue.
• B & W — Subjects and pictures appear in black and white.
• Aqua — Subjects and pictures appear in an aqua hue.
2. Select the color effect of your choice. You’re returned to
the camera viewfinder screen.
previews your subject image with the measured exposure.
Settings — Common Tab
previews your subject image with the selected color effect.
Default Storage
In camera mode, press the Settings soft key, then select
Common Tab ➔ Default storage. The following options
appear in the display:
• Phone Memory — Stores pictures in phone memory.
• Card Memory — Stores pictures on an optional microSD Memory
Card.
2. Select the memory location setting of your choice. You’re
returned to the camera viewfinder screen.
1.
The ISO feature allows you to set the camera exposure index.
1.
In camera mode, press the Settings soft key, then select
Camera Tab ➔ ISO.
2.
Select one of the options: Auto, 100, 200, or 400. You’re
returned to the camera viewfinder screen.
Exposure metering
71
When you take your next picture, the phone’s display
When you take your next picture, the phone’s display
ISO
1.
• Center-weighted — Adjusts exposure to the average light level
over a center portion of the subject.
• Spot — Adjusts exposure to the light level over a small portion of
the subject.
2. Select the Metering setting of your choice. You’re returned
to the camera viewfinder screen.
In camera mode, press the Settings soft key, then select
Camera Tab ➔ Exposure metering. The following options
appear in the display:
• Normal — Adjusts exposure to the average light level over a large
picture area.
Auto Save
1.
In camera mode, press the Settings button, then select
Common Tab ➔ Auto Save. The following options appear in
the display:
• Off
2.
• On
Select the automatic save setting of your choice. You’re
returned to the camera viewfinder screen.
Guideline
Shows a cross hatch pattern in the view finder screen.
In camera mode, press the Options soft key, then highlight
Settings and select Guideline. The following options appear
in the display:
• Off
• On
2. Select the viewfinder screen setting of your choice. You’re
returned to the camera viewfinder screen.
1.
2.
Brightness
Brightness lets you temporarily lighten the pictures you take.
Increasing the Brightness (-4 settings – +4 settings) lightens
your pictures (0 is normal).
1.
In camera mode, press the Brightness button. The
horizontal Brightness scale appears in the display.
2.
To increase Brightness (brighten your picture), press the +
button. To decrease Brightness (darken your picture), press
the - button.
Shutter Sound
Choose from four different sounds whenever you take a picture.
Aside from being a cool sound effect, Shutter Sounds acts as an
audible reminder that your camera has taken a picture.
1.
In camera mode, press the Settings button, then select
Common Tab ➔ Shutter Sound. The following shutter
sounds appear in the display:
• Off
• Shutter
• OK
• Melody
Select the shutter sound setting of your choice. You’re
returned to the camera viewfinder screen.
The next time you press the Camera key (
), the
camera takes a lighter or darker picture according to your
selected Brightness setting.
Zoom
Zoom lets you temporarily enlarge the pictures you take.
Increasing the Zoom (2 – 9) enlarges your pictures or videos (1 is
normal).
1.
In camera mode, press the Volume key (on the left side of
the phone) up or down. The horizontal Zoom scale appears
in the display.
Camera-Camcorder
72
2.
To Zoom in on a subject, press the Volume key down.
3.
To Zoom out from a subject, press the Volume key up.
The next time you press the Camera key (
), the
camera takes an enlarged picture according to your
selected Zoom setting.
• Video Msg — Record videos that are a maximum of 15 seconds
long. The videos can be included in video messages.
2. Select the desired recording mode setting. The camcorder
viewfinder screen appears in the display.
Note: The Recording Mode setting affects the following settings:
- Size — When Recording Mode is set to Video Msg, the Size setting is
locked at 176 x 144.
Note: The Size setting affects zoom capabilities. When Size is set to 1600 x
1200, zoom is not available. When Size is set to any value lower than
1600 x 1200, zoom settings 1 – 9 are available.
Camcorder Options
The Camcorder Options let you adjust the default camcorder
settings to suite available lighting, the subject of the video, or the
purpose of the video.
To access Camcorder Options, press/select the any of the
following buttons/options:
Mode
Switches to Camera mode. The Camera view finder screen
appears in the display.
Recording Mode
1.
73
In camcorder mode, press the Recording Mode button. The
following options appear in the display:
• Normal — Record videos that are any length up, depending on
available memory.
- Quality — When Recording Mode is set to Video Msg, the Quality
setting is locked at Economy.
Size
Change the size (in bytes) of your videos by changing the video
resolution setting.
In camera mode, press the Size button. The following
options pop-up:
• 320 x 240 (pixels)
• 176 x 144 (pixels)
2. Select the desired option. You’re returned to the camera
viewfinder screen.
1.
Note: The Size setting is affected by the Recording Mode setting. When
Recording Mode is set to Video Msg, the Size setting is locked at 176 x
144.
Settings — Camcorder Tab
Quality
You can affect how much your video is compressed, thereby
reducing it’s overall size (not to be confused with the Size
setting).
In camcorder mode, press the Settings button, then select
Camcorder Tab ➔ Quality. The following options appear in
the display:
• High
• Normal
• Economy
2. Select the quality setting of your choice. You’re returned to
the camcorder viewfinder screen.
• 3 Seconds
• 5 Seconds
• 10 Seconds
2. Select the desired Self Timer option. If you select 3, 5, or
10, the Self Timer icon appears in the camcorder screen in
the display.
1.
Note: The Quality is affected by the Recording Mode setting. When Recording
Mode is set to Video Msg, the Quality setting is locked at Economy.
Self Timer
Self Timer lets you delay recording a video long enough to let you
join others in a picture.
1.
In camcorder mode, press the Settings button, then select
Camcorder Tab ➔ Self Timer. The following options appear
in the display:
• Off
When you press the Camera key (
), the countdown
timer indicates the time remaining before the camcorder
begins recording.
Tip: To stop the countdown timer without resetting it, press
.
White Balance
White Balance allows you to adjust video quality according to
available light.
1.
In camcorder mode, press the Settings button, then select
Camcorder Tab ➔ White Balance. The options are:
• Auto — The camcorder automatically adjusts color balance to
available light.
• Daylight — Use this setting when recording videos in full sun.
• Cloudy — Use this setting when recording videos in cloudy
conditions.
• Tungsten — Use this setting when recording videos under
incandescent lights.
Camera-Camcorder
74
• Fluorescent — Use this setting when recording videos under
fluorescent lights.
2. Select the White Balance you wish to use. The camcorder
viewfinder screen appears in the display with your
selected White Balance applied.
The next time you press the Camera key (
video.
Effects
Change the look of your videos with Color Effects. Choose from
six available settings such as Gray, Negative, and Sepia. The
selected color effect previews in the display before you take the
picture.
In camcorder mode, press the Settings button, then select
Camcorder Tab ➔ Effects. The following options appear in
the display.
Note: Choose Normal to disable Color Effects.
• Normal — Subjects and pictures appear with a normal hue.
• Sketch — Subjects and pictures appear as black and white
outlines.
• Negative — Subjects and pictures appear in inverted colors.
• Sepia — Subjects and pictures appear in a brownish-gray hue.
75
When you record your next video, the phone’s display
), the
camcorder applies the selected White Balance to your
1.
• B & W — Subjects and pictures appear in black and white.
• Aqua — Subjects and pictures appear in an aqua hue.
2. Select the color effect of your choice. You’re returned to
the camcorder viewfinder screen.
previews your subject image with the selected color effect.
Camcorder Settings — Common Tab
Default storage
In camcorder mode, press the Settings button, then select
Common Tab ➔ Default storage. The following Memory
options appear in the display:
• Phone Memory — Stores videos in phone memory.
• Card Memory — Stores videos on an optional microSD Memory
Card.
2. Select the memory location setting of your choice. You’re
returned to the camcorder viewfinder screen.
1.
Auto Save
1.
In camcorder mode, press the Settings button, then select
Common Tab ➔ Auto Save. The following options appear in
the display:
• Off
• On
2.
Select the automatic save setting of your choice. You’re
returned to the camcorder viewfinder screen.
Start Sound
Choose from two different sounds whenever you begin video
recording. Aside from being a cool sound effect, Start Sound acts
as an audible reminder that your camcorder has begun recording
a video.
In camcorder mode, press the Settings button, then select
Common Tab ➔ Start Sound. The following Memory
options appear in the display:
• Off
• Beep
• Look Here!
• 1,2,3!
2. Select the desired start sound. You’re returned to the
camcorder viewfinder screen.
1.
End Sound
Choose from two different sounds whenever you stop video
recording. Aside from being a cool sound effect, End Sound acts
as an audible reminder that your camcorder has stopped
recording a video.
1.
appear in the display:
• Off
• Beep
• OK
• Melody
2. Select the desired end sound. You’re returned to the
camcorder viewfinder screen.
Brightness
Brightness lets you temporarily lighten the videos you record.
Increasing the Brightness (-4 – +4) lightens your videos (0 is
normal).
1.
In camcorder mode, press the Brightness button. The
horizontal Brightness scale appears in the display.
2.
To increase Brightness (brighten your picture), press the +
button. To decrease Brightness (darken your picture), press
the - button.
The next time you press the Camera key (
), the
camcorder records a lighter or darker image according to
your selected Brightness setting.
In camcorder mode, press the Settings button, then select
Common Tab ➔ End Sound. The following Memory options
Camera-Camcorder
76
Zoom
4.
Zoom lets you temporarily enlarge the pictures you take.
Increasing the Zoom (1 – 9) enlarges your pictures or videos (0 is
normal).
1.
In camcorder mode, press the Volume key (on the left side
of the phone) up or down. The horizontal Zoom scale
appears in the display.
2.
To Zoom in on a subject, press the Volume key down.
3.
To Zoom out from a subject, press the Volume key up.
The next time you press the Camera key (
), the
camcorder records an enlarged image according to your
selected Zoom setting.
The Photo Gallery
Saved pictures are stored in the My Images folder. You can
browse the pictures one at a time (expanded mode), or view
several pictures at once in thumbnail format.
77
1.
In the Camera viewfinder screen, press the Gallery button.
Any pictures that you’ve saved are listed with their
thumbnail images in the display.
2.
Press and slide to browse pictures in the gallery.
3.
To send the currently displayed or highlighted picture as a
Picture message, press the Send soft key.
To delete selected unlocked pictures from the My Images
folder, press the Erase soft key. Locked pictures must be
unlocked before you can erase them.
For more options, press the More soft key. The following
additional options pop-up:
• Camera — Launches the camera.
• CANVAS — Lets you overlay a selected image with drawing(s) or
handwriting, then save it and send it in a Picture message.
• Move — Transfer one or more images to an optional Memory
Card.
• Copy — Save a copy of one or more images to an optional
Memory Card.
• Lock/Unlock — Prevent/allow erasure of one or more images.
• Print — Print one or more images on a Bluetooth-compatible
printer.
6. To view an image, select it. While viewing an image, you
have the following options:
• To send the image in a Picture message, press the Send soft key.
• To assign the image as the standby screen Wallpaper or as a
Picture ID for someone in your Contacts list, press the Set As soft
key.
• To access more options, press the More soft key. The following
additional options pop-up:
– Camera — Launches the camera.
5.
7.
– Erase — Deletes the image from the My Images folder, provided the
image is unlocked.
– Move to Card — Transfer this image to an optional Memory Card.
– Copy to Card — Save a copy of this image to an optional Memory
Card.
– Rename — Rename the currently displayed or highlighted picture.
– Lock / Unlock — Lock the currently displayed or highlighted picture
so that it cannot be deleted, or unlock the picture so that it can be
deleted.
– Print — Print the image on a Bluetooth-compatible printer.
– Slide Show — Show the images as a full screen slide show.
– Image Info — View the Title, time and date created, size, and
resolution of the currently highlighted or displayed picture.
3.
5.
Enter the recipient’s phone number or email address using
the keypad.
Select the desired option to perform its function or to enter
its sub-menu.
6.
Press the Done soft key to save the address(es).
7.
Press the Next soft key to move to the Subject field. Select
the other message fields as needed. For more information,
refer to “Messaging” on page 49
8.
When you are finished composing your message, press
Send soft key to send the Picture or Video message to the
intended recipient(s).
The photo/video review screen appears in the display.
4.
1.
In Camera mode, press and hold the Camera key (
)
on the right side of the phone. The camera view finder
screen appears in the display.
2.
If desired, press the Mode button. The camcorder view
finder screen appears in the display.
Press the Send button, then select Picture Message or
Video Message.
The Picture Msg or Video Msg screen appears in the
display.
Point, Click, and Send Pictures and Videos
Take a picture or record a video and send it to anyone with a
compatible device in a few easy steps.
Using the display as a viewfinder, take the desired picture
or record the desired video by pressing the Camera key
(
), and then pressing the Stop button ( ) to stop
video recording.
Camera-Camcorder
78
Section 11: Music Player
Music Player lets you play music files (such as, CMX, MIDI, MP3,
AAC, AAC+, and eAAC+) stored on a Memory Card.
Music Player Controls
1.
This section describes your phone’s Music Player functions and
key features associated with multimedia.
Launches the
Music Library
menu.
Accessing the Music Player
Note: A microSD Memory Card must be
installed for the Music Player to
launch. (For more information, refer
to “Memory Card (Optional)” on
page 8)
䊳
In Standby mode, press the
Menu soft key, then select
Music Player. The Music
Player screen appears in the
display.
Music Library button
2.
Selection Information
area — Shows album
cover image, selection
title/file name, artist, and
album name, if available.
3.
Equalization and
Repetition controls — Set
the equalization (Normal, Rock, Jazz, or Classic), repetition,
and stereo/mono.
Plays through each song on the playlist one time.
Plays and replays one song until you press Stop
or Pause.
79
Plays all songs in the Playlist and then replays
until you press Stop or Pause.
Plays songs at random, that is, in no particular
order.
Plays songs in the listed order.
4.
Progress bar — Indicates progress of playback.
5.
Elapsed Time and Total Time — Show how many hours,
minutes, and seconds of the music file have been played
and shows how long the music file is in hours, minutes,
and seconds.
6.
Playback controls
Mutes music file playback.
Changes playback to next music file in playback
list.
Music Player Soft Keys
• Details — Launches the Details screen which shows Title, Artists,
Album s, Genre, File Name, Encoding Format, Bitrate, Duration, File
Size, and Date for the music file currently playing.
• Home — Closes the Music Player screen and returns to Standby
mode.
Browsing for a Music File to Play
To select a music file to play:
1.
From the Music Player screen,
press the Music Library
button (
) in the upper
left corner of the screen.
The Library screen appears in
Changes playback to previous music file in
playback list.
Starts/resumes music file playback.
Pauses music file playback.
the display listing the
following options:
• Now Playing List — Lists you
most recently played Playlist.
• All Tracks — Lists all music files
stored in the My Music folder on a microSD Memory Card by their
file names.
Music Player
80
• Playlists — Lists any music file Playlist(s) you have created.
• Artists — Lists all available recording artists names with music
files stored on a Memory Card.
• Albums — Lists all available album titles for music files stored on a
Memory Card.
2. Select the music file group you wish to access. A list of
music files appears in the display.
3.
4.
Enter the first few characters
of the file, Playlist, artist, or
album you wish to find. (For
more information, refer to
“Entering Text” on page 43.)
5.
Press the Done soft key. A list
of the files, Playlists, artists,
or albums with names that
match your text entry appears
in the search screen.
6.
Select the file you wish to
play. The Music Player screen
appears in the display and the
selected file begins playing.
To play a music file, select the file. The Music Player screen
appears in the display and the selected file begins playing.
To add a file to a Playlist, press the Add to Playlist soft key.
The Add Songs screen appears in the display.
• Select a music file to add to a Playlist. A check mark appears in the
check box for that file.
• Press the Save soft key.
Searching for a Music File to Play
4.
81
1.
From the Music Player screen, press the Music Library
button in the upper left corner of the screen. The Music
Library screen appears in the display.
2.
Select the music file group you wish to access. A list of
music files appears in the display.
3.
Select the <Tab Here To Find> field. The 3X4 Keypad screen
appears in the display.
Section 12: Multimedia
This section outlines your phone’s multimedia functions and key
features associated with multimedia.
Accessing Multimedia
In Standby mode, press the Menu soft key, then select
Multimedia. The following Multimedia sub-menus appear
in the display:
• Camera — Lets you launch and set up your phone’s camera. (For
more information, refer to “Camera-Camcorder” on page 63)
• Camcorder — Lets you launch and set up your phone’s
camcorder. (For more information, refer to “CameraCamcorder” on page 63)
• My Images — Lets you choose the multi-media or pictures that
appear in your phone’s display.
• My Videos — Lets you choose the videos that appear in your
phone’s display.
• My Ringtones — Lets you assign melody tones for calls, alarms,
and other alerts.
• My Sounds — Lets you assign melody tones for calls, alarms, and
other alerts.
2. Select a sub-menu to launch it. The following sections
describe the above listed sub-menus in greater detail.
1.
My Images
My Images lets you choose the pictures that appear in your
phone’s display while in Standby mode (wallpaper) and as picture
IDs for your contacts.
1.
From the Multimedia menu, select My Images.
If there are no pictures stored in your phone or on a
memory card, “Empty” appears in the My Images screen.
[To launch the camera to take a picture, press the More
soft key and select the Camera option. (For more
information, refer to “Camera-Camcorder” on page 63)]
If there are pictures stored in your phone or on an optional
Memory Card, up to seven thumbnail images of your
pictures appear in the display.
Tip: You can also access My Images from:
-The Camera screen, by selecting the Gallery button.
-The Edit Contact screen, by selecting the picture ID field and then
selecting the My Images option.
2.
Select a picture to enlarge it for easier viewing.
3.
To send the selected image to a specified recipient in a
Picture message, press the Send soft key.
Multimedia
82
4.
To assign the selected picture as the Picture ID for a
Contact, or as the Wallpaper for the Standby mode screen,
press the Set as soft key.
Press the More soft key. A pop-up menu containing the
following options appears in the display:
• Camera — Lets you take additional photos.
• Erase — Deletes the selected image.
• Move to card / phone — Lets you move the picture from the
phone to a memory card or from a memory card to the phone.
• Copy to card / phone — Lets you save a copy the picture to the
phone or to a memory card.
• Rename — Lets you rename the image.
• Lock / Unlock — Prevents/allows deletion of the image.
• Print — Lets you print the image to a Bluetooth-compatible printer.
• Slide Show — Lets you view the images in the My Images folder
as a slide show.
• Image Info — Displays information about the image, such as the
file Name, creation Date and Time, Resolution, and the data Size.
6. Select the desired option.
5.
My Videos
My Videos lets you take videos, review your videos, send them as
video messages, and assign your videos as wallpaper on your
phone.
83
1.
From the Multimedia menu, select My Videos.
If there are no videos stored in your phone or on a memory
card, “Empty” appears in the Videos screen.
If there are videos stored in your phone or on an optional
Memory Card, the Videos screen appears showing a list of
up to seven videos with thumbnail images.
• To view the Videos Gallery as an array of thumbnail images, press
.
• To return to the list of Videos and thumbnail images, press
.
2. To play a video, select it. The
Video Player screen appears
in the display and begins
playing the highlighted video.
3.
To send a video as part of a
video message, press the
Send soft key. (For more
information, refer to “Creating
and Sending a Video
Message” on page 52)
4.
To delete one or more video
clips from the My Videos
folder, press the Erase soft
key.
5.
To move a video from the phone to a Memory Card or from
a Memory Card to the phone, press the Move soft key.
3.
To delete one or more video clips from the My Videos
folder, press the Erase soft key.
6.
To take a new video, press the More soft key and select the
Camcorder option. The camcorder view finder screen
appears in the display. (For more information, refer to
“Camera-Camcorder” on page 63)
4.
To view the video in the largest size possible, rotate the
handset counter-clockwise or press the Full Screen soft
key.
5.
For more Video Player options, press the More soft key. The
following options appear in the display:
• Camcorder — Lets you record a new video clip.
• Move to card / phone — Lets you move a video between a
Memory Card and phone memory.
• Copy to card / phone — Lets you copy a video to a Memory Card
or to phone memory.
• Rename — Lets you change the name of this video clip.
• Lock / Unlock — Lets you protect the video from being deleted.
For more My Videos options, press the More soft key. The
following options appear in the display:
• Camcorder — Lets you record a new video clip.
• Copy — Lets you save a copy of a video to phone memory or to a
Memory Card.
• Lock / Unlock — Lets you block/permit deletion of a video.
8. Select the desired option.
7.
Video Player
Your phone includes a Video Player capable of playing 3gs and
MP4 video files. To launch the Video Player:
1.
From the Videos screen, select a video. The Video Player
screen appears in the display and the selected video
begins playing.
2.
To send a video as part of a video message, press the Send
soft key. (For more information, refer to “Creating and
Sending a Video Message” on page 52)
Multimedia
84
• Video Info — Displays information about the video, such as the
video Name, creation Date and Time, Resolution, data Size, and
the Duration.
6. To select another video for playback, press
in the
upper left corner of the screen.
My Ringtones
My Ringtones lets you assign ringtones (preloaded and
downloaded) for calls, alerts, and as distinctive ringers for
Contacts.
1.
From the Multimedia menu, select My Ringtones. A list of
ringtones appears in the display.
Tip: You can also access My Ringtones from:
-An Alarm screen by selecting the Alarm Tone option.
-The Edit Contact screen by selecting the
option.
When accessing My Ringtones from an Alarm or a Contact,
select a particular ringtone. A dot appears in the selected
ringtone’s radio button, and the ringtone plays once.
• To assign the marked ringtone to the Alarm or Contact, press the
Set soft key.
3. When accessing My Ringtones from the Multimedia menu,
assign the highlighted ringtone by pressing the Set As
button. The following options appear in the display:
2.
85
• Ringtone — Lets you assign the selected ringtone to incoming
voice calls.
• Contact ID — Lets you assign the selected ringtone as the
distinctive ringer for a Contact.
• Alert Tone — Lets you assign the selected ringtone to All
Messages, TXT Message, Picture-Video Message, or Voicemail
Message.
4. Select the desired option.
When using a downloaded ringtone, you can select the
following options:
• Send Via BT— Send the ringtone via a Bluetooth device.
• Erase — Erases the selected file or all downloaded ringtones.
• More — Pops-up the following additional options:
– Lock / Unlock — Lets you prevent/permit file deletion.
– Ringtone Info — Displays information about the selected file, such as
the file name, the file type, and the data size.
6. Select the desired option.
5.
My Sounds
My Sounds lets you record voice memos and lets you assign
preloaded and downloaded sound files as ringers for calls,
alarms, and other alerts.
1.
From the Multimedia menu, select My Sounds. The My
Sounds menu appears in the display, along with the follow
options:
• Record New — Lets you record a new sound file.
• Erase — Erases one or more sound files.
• Lock/Unlock — Lets you protect the sound file from being deleted.
Tip: You can also access My Sounds from:
-A Set Alarm screen by selecting the Alarm Tone option, then pressing
the My Sounds soft key.
-The Edit Contact screen by selecting the
Sounds soft key.
2.
option and pressing the My
Select a file. The Sound Player screen appears in the
display, and the selected sound file begins to play.
For a preloaded sound file, the following options appears in
the display:
• Record New— Lets you record a new sound file.
• Send — Lets you send the selected sound file to a specified
recipient in a Picture message.
• Set As — Lets you assign the selected sound file as the Ringtone
or as the Contact ID for a Contact or an Alert Tone for Text, Picture,
or Voicemail messages.
• Sound Info — Displays information about the sound file, such as
the file name, file type, and the data size.
For a downloaded sound file, the following options appear
in the display:
• Record New— Lets you record a new sound file.
• Send — Lets you send the selected sound file to a specified
recipient in a Picture message.
• Set As — Lets you assign the selected sound file as the Ringtone
or as the Contact ID for a Contact or an Alert Tone for Text, Picture,
or Voicemail messages.
• More
– Erase — Erases one or more sound files.
– Rename — Lets you rename the sound file.
– Lock / Unlock — Lets you protect the sound file from being deleted.
– Sound Info — Displays information about the sound file, such as Title,
File Size, File Type, Date and Time.
3. Select the desired option.
Voice Memo
You can use your phone to record voice memos and other sound
files for later playback or assignment as ringers. (For more
information, refer to “Ringer Type” on page 112)
Note: The maximum length for a single voice memo is 60 seconds.
You can save as many voice memos as will fit in the empty
memory capacity.
Record a Voice Memo
1.
From the Multimedia menu, select My Sounds ➔ Record
New.
Multimedia
86
2.
Select Until Memory Full or Limit for Message.
3.
Press the Erase soft key. The “Select to erase” screen
appears in the display.
4.
Select the voice memo you wish to erase, then press the
Erase soft key.
The Voice Memo screen appears in the display.
Press REC, then start speaking. As it is recording the phone
displays a countdown timer that shows the seconds
remaining for the recording.
• To pause the memo, press the Pause soft key. When a memo is
paused, select Rec to continue recording.
4. Press Stop once you’re finished recording. The new
recording is saved, and the Standby mode screen appears
in the display.
3.
Review Voice Memos
If you’ve saved any voice memos, you can review them anytime.
1.
In Standby mode, press Menu, then select Multimedia ➔
My Sounds. A list of sound files appears in the display.
2.
Select the voice memo you wish to review. The memo
begins to play.
• To stop the memo, press Pause
.
When the voice memo finishes playing, the selected voice
memo remains highlighted in the list of sound files.
Erase One Voice Memo
87
1.
In Standby mode, press Menu, then select Multimedia ➔
My Sounds. A list of sound files appears in the display.
2.
Highlight the voice memo you wish to erase.
Erase All Voice Memos at One Time
1.
From the Multimedia menu, select My Sounds. A list of
sound files appears in the display.
2.
Use the navigation keys to highlight a voice memo.
3.
Tap the Erase soft key.
4.
Tap Select All. A check mark appears next to the option.
5.
Tap the Erase soft key again.
Section 13: Tools
This section explains how to use your phone’s digital assistant
functions to view today’s calendar, schedule events, set
reminders, perform calculations, and more.
Accessing Your Phone’s Tools
To launch the Tools menu:
䊳
In Standby mode, press the Menu soft key, then select
Tools. The Tools menu appears in the display.
Voice Service
Your device includes state-of-the-art voice recognition software
that lets you use your voice to dial numbers, access your
Contacts list, and open Tools. To access your phone’s voice
recognition, do the following:
At the Tools menu, select Voice Service. The following
options appear in the display:
• Voice Commands — Lets you place calls, access your Contacts
List, review your appointments, and more by speaking commands
into your phone. (Also see “Using Voice Dial” on page 20 and
see “Voice Method” on page 36 for more information.)
• Voice Settings — Lets you tailor VoiceSignal to better respond to
your voice and your phone use preferences. (For more information,
refer to “Adaptation” on page 90.)
2. Select the desired sub-menu.
1.
Voice Commands
To access the Voice Commands menu:
1.
In Standby mode, press and hold the Voice Recognition key
(
), on the right side of the phone.
– Or –
From the Tools menu, select Voice Service ➔ Voice
Commands.
Tip: You can also set your phone to start VoiceSignal when you connect an
optional headset to the phone. (For more information, refer to “Voice
Launch” on page 91.)
“Say a Command” appears in the display and is
pronounced through the earpiece, followed by a list of
available commands:
• Call — Lets you dial the phone by saying any name stored in your
contact list, without ever having to record, or “train” that name.
VoiceSignal automatically voice-activates all your contacts, even if
you have hundreds of them stored on your phone. You can also dial
any telephone number, even if it is not stored in your contact list, by
saying the digits in the number. (For more information, refer to
“Using Voice Dial” on page 20.)
• Send Text — Lets you access Create Text Message.
Tools
88
• Send Picture — Lets you access Create Picture Message.
• Lookup — Lets you find a Contact by name and review the
Contact’s information.
• Go to — Lets you access the following list of your phone’s features
and functions:
– Contacts
– Calls
– Multimedia
– Messaging
– easyedgeSM
– Camera
– Tools
– Music Player
– Calendar
– Settings
– Alarm
– Calculator
• Check — Lets you say a single command (such as “Status”) to
verify your phone's: Status, Signal Strength, Network, Battery, or
My Phone Number.
2. Speaking clearly, say the command that you want to use.
If VoiceSignal does not recognize a command, it prompts
you to repeat the command.
89
If VoiceSignal still does not recognized the command, it
tells you “No match found” and offers you the option of
selecting Settings or Repeat before canceling voice
recognition.
Voice Command Tips:
• Make sure you wait for the beep and/or “Listening ...” pop-up before
speaking.
• Speak clearly at a normal volume, as if you were talking on the phone.
Voice Settings
Confirmation
You can select whether and when VoiceSignal asks for
confirmation of your responses when using the Call command.
From the Tools menu, select Voice Service ➔ Voice Settings
➔ Confirmation. The following options appear:
• Automatic — Voice Service asks for your confirmation only when it
is not sure if it has correctly recognized the name or number.
• Always Confirm — Voice Service always asks for your
confirmation.
• Never Confirm — Voice Service never asks for your confirmation.
2. Select your preferred setting.
1.
3.
To save your selection, press the OK soft key. To discard
the new setting, press
. You are returned to the Voice
Settings menu.
Adaptation
If you regularly have trouble with Voice Service not recognizing
the commands, names, and/or numbers you say, try adapting
Voice Service to your voice. Adapting can improve the accuracy
of Voice Service responses, especially for people with strong
regional accents.
Note: After you adapt Voice Service, it is customized to your voice, and your
voice only. Others will not be able to use your Voice Service on your
phone unless they reset it to factory defaults.
• Only use Adaptation if you are regularly having problems with Voice
Service. Once you adapt Voice Service, it will not work as well for other
people using your phone. (You can always reset Voice Service to its
original state, as described below.)
Adapt Voice
To adapt Voice Signal to your voice, do the following:
1.
From the Tools menu, select Voice Service ➔ Voice Settings
➔ Adaptation. The Adaptation screen appears in the
display showing the Adapt Voice option.
2.
Select Adapt Voice. Your phone displays text describing the
Adapt Digits process.
3.
Press the Start soft key. Your phone displays the first
phrase or digit sequence and says “Please say” through
the speaker followed by the phrase or digit sequence
appearing in the display.
4.
Wait for the beep and say the phrase or digits using your
normal tone of voice. Adaptation continues the recording
process with the next phrase or set of digits.
Adaptation involves recording your responses to several
sequences of phrases. The recording process takes a couple of
minutes.
Tips for Adapting Voice Service:
• Use Adaptation in a quiet place.
• Do not use a headset during Adaptation.
• Make sure you wait for the beep before starting to speak.
• Speak clearly, and say each phrase distinctly.
• If you make a mistake while recording a phrase, or if there is an
unexpected noise that spoils the recording, re-record that phrase.
After 15 phrases and sets of digits, adaptation ends and
your are returned to the Adaptation screen.
Reset Voice
To reset Voice Service to factory default settings, do the
following:
Tools
90
1.
2.
From the Tools menu, select Voice Service ➔ Voice Settings
➔ Adaptation ➔ Reset Voice. The phone prompts you to
confirm voice adaptation reset.
Press the Yes soft key to reset your voice adaptation, or
press the No soft key to keep your voice adaptation.
Modes
Modes lets you specify whether Voice Service is to read prompts
and/or on-screen text to you when you are using your phone’s
menus.
From the Tools menu, select Voice Service ➔ Voice Settings
➔ Modes. The following options appear in the display:
• Expert Mode — Voice Signal plays a beep when it requires
information from you.
• Prompt Mode — Voice Signal plays audio prompts for required
information.
• Readout Mode — Voice Signal reads on-screen text and plays
audio prompts for required information.
2. Select the preferred setting.
1.
3.
Press the OK soft key to accept the new setting. Press
to discard the new setting and return to the Voice
Settings menu.
Voice Launch
To set the key or action that launches Voice Service, do the
following:
From the Tools menu, select Voice Service ➔ Voice Settings
➔ Voice Launch. The following options appear in the
display:
• Key Only — Press and hold the Voice Recognition key (
) to
activate Voice Service.
• Key/EarMic — Attach a headset to your phone. Press and hold the
Voice Recognition key (
) or press the button on the headset
to activate Voice Service.
2. Select the preferred setting.
1.
3.
Press the OK soft key to accept the new setting. Press
to discard the new setting and return to the Voice
Settings menu.
About
This option displays version and build information about the Voice
Service software included on your phone.
䊳
From the Tools menu, select Voice Service ➔ Voice Settings
➔ About.
The About screen appears in the display showing the
version level of the Voice Service software currently
installed on your phone.
91
Bluetooth
Turn Bluetooth On
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30
feet without requiring a physical connection.
1.
From the Tools menu, select
Bluetooth. The Bluetooth
screen displays.
Unlike infrared, you don't need to line up the devices to beam
information with Bluetooth. If the devices are within a range of
one another, you can exchange information between them, even
if they are located in different rooms.
2.
Press the Turn On soft key.
• “Bluetooth Power On” pops-up
in the display.
• The blue Bluetooth On icon
( ) appears on the status bar.
• The SEARCH button becomes
highlighted in blue.
The Bluetooth wireless technology settings menu provides the
ability to view and change the device name, show the visibility,
and set the security for the device.
Turn Bluetooth On/Off
When the Bluetooth is turned on, you can use the Bluetooth
features available. When the Bluetooth is turned off, you cannot
send or receive information via Bluetooth. To save battery life or
in situations where Bluetooth use is prohibited, such as airline
traveling, you can turn off the Bluetooth wireless technology
headset.
Turn Bluetooth Off
1.
From the Tools menu, select
Bluetooth. The Bluetooth screen displays.
2.
Press the Turn Off soft key. “Bluetooth Power Off” pops-up
in the display, the SEARCH button highlighting disappears,
and the blue Bluetooth On icon ( ) disappears from the
status bar.
Tools
92
Add New Device
Searching for Available Bluetooth
Devices
selected device’s name, Type, Status, and Address.
5.
Return to the Bluetooth screen by pressing the OK soft key.
1.
From the Tools menu, select
Bluetooth. The Bluetooth
screen displays.
6.
Press, hold, and slide the identified icon to overlap the
SEARCH button. You are prompted to enter the passkey or
PIN for the selected device.
2.
Place the Bluetooth device
you want to pair with your
device in discoverable mode.
(See the device user manual
for more information.)
7.
3.
Press the SEARCH button.
Enter the device passkey or PIN and press the Done soft
key. (See the device user manual for more information.)
Pop-up messages appear and the SEARCH button and
selected device icon are highlighted in blue to inform you
that pairing with the device and connecting to it are
complete.
Note: If Bluetooth is off, it automatically
turns on.
Your phone searches for available Bluetooth devices.
Named icons for available devices appear in the display.
Note: When more than 5 devices are detected, additional icons are placed on
additional Bluetooth screen pages.
4.
93
The Device Info screen appears in the display, showing the
Identify the device you want to pair with your phone by
selecting an icon.
Note: If you are pairing and connecting to another phone or to a personal
computer, both devices prompt for a passkey or PIN. To successfully
pair and connect your phone with the other device, the same passkey
or PIN must be entered on both devices.
Paired Icons
The Bluetooth screen shows the
icons for Bluetooth wireless
technology devices paired with your
handset.
1.
From the Tools menu, select
Bluetooth. Icons for
registered Bluetooth devices
appear in the display.
Connecting to a Bluetooth Device
1.
In the Bluetooth screen,
press, hold, and slide the icon
for the preferred device to
overlap the SEARCH button. The SEARCH button and the
device icon flash and are highlighted in blue to indicate the
connection is complete.
2.
If you are unable to connect with the device a pop-up
appears in the display. Press, hold, and slide the selected
icon to overlap the SEARCH button again.
Disconnecting from a Bluetooth Device
1.
In the Bluetooth screen, press the device icon. A device
options list pops-up.
2.
Select Disconnect. The device icon’s blue highlighting
disappears.
Managing Your Paired Icons
In the Bluetooth screen, press a device icon. A device
options list pops-up. The following options appear in the
display:
• Browse files— Lets you browse files on the device.
• Send files— Lets you send files to the device.
• Rename — Lets you change or replace the device name, as
needed.
• Remove — Deletes the device from the Bluetooth screen.
• Service list — Lists the Bluetooth services supported by your
device.
• Device Info — Shows the device name, Type of device, Status,
and device Address.
2. Select the desired option.
1.
Bluetooth Settings
1.
To access your phone’s Bluetooth settings, in the Bluetooth
screen, press the Settings soft key. The Phone Settings
screen appears in the display showing the following
options:
• My Phone’s Name — Shows your device’s name. You may
change this name. Just select the name and enter your text
changes.
Tools
94
• Discovery Mode — Allows other Bluetooth devices to see your
device as accessible. Select On for other devices to see your
device, or Off for no visibility.
• Address — Shows the Bluetooth Address of your phone. (This
address is not changeable.)
2. To save your changes, press the Save soft key. Press
to discard your changes and return to the Bluetooth screen.
• Left/Right buttons — Moves the date and screen back/ahead one
month per keypress.
• Goto soft key — Select a particular date.
Add a New Event
1.
Calendar
Calendar lets you view the current,
past, or future month in calendar
format. While viewing the calendar,
the current date is highlighted, and
days with scheduled events are
surrounded by a box.
Navigating the Calendar
1.
From the Tools menu, select
Calendar.
The calendar appears in the
display with the current date
highlighted. The month and year appear at the top of the
display.
2.
95
Use the following controls to display a particular month
and to highlight a particular date in the Calendar screen:
From the Tools menu, select Calendar.
The calendar appears in the display with the current date
highlighted. The month and year appear at the top of the
display.
2.
Highlight the desired date. (For more information, refer to
“Navigating the Calendar” on page 95.)
3.
Press the New Event soft key. The New Event screen
appears in the display.
4.
Enter the event Title. (For more information, refer to
“Entering Text” on page 43.)
5.
Select each of the following New Event options:
• Start Date — Populated with highlighted Calendar date. Select the
date this event begins.
• Start Time — Populated with the current time (rounded to the
nearest half-hour). Select the time this event begins.
• Alarm — Select Off / 10 Mins Before / 30 Mins Before / 1 Hour
Before / 1 Day Before / 1 Week Before / Customize (select
particular number of minutes, hours, or days before the Start Date
and Start Time).
For additional New Event options, press the Set Details soft
key.
• End Date — Populated with highlighted Calendar date. Select the
date this event ends.
• End Time — Populated with a time one half-hour later that Start
Time. Select the time this event ends.
• Details — Add details about the event.
• Location — Add location of the event.
• Alarm Tone — Select a ringtone from My Ringtones, buy a
ringtone on-line, or select a sound file from My Sounds. When you
select a ringtone or sound, it plays.
• Repeat — Select Off / Every Day / Every Week / Every Month /
Every Year.
7. Press the Save soft key to save your additional details
settings.
6.
8.
To store this Event in your Calendar, press the Save soft
key. An alarm will notify you before the start of this Event,
if Alarm is set to a value other than Off.
View/Change an Event
1.
From the Tools menu, select Calendar.
A calendar appears in the display with the current date
2.
Navigate to and select a desired date. (For more
information, refer to “Navigating the Calendar” on
page 95.) The calendar is replaced by the Daily View for
the selected date, listing all events scheduled for this date.
Select an Event to view. The current settings for the
selected Event appear in the display in a scrollable list.
• To change the event details, press the Edit soft key. (For more
information, refer to “Add a New Event” on page 95.)
• To remove the event from the calendar, press the Erase soft key.
(You are prompted to confirm the erasure.)
• To return to the Daily View list, press
.
4. For other options, press the More soft key. The following
options appear in the display:
• Monthly View — Returns you to the Calendar screen, showing the
current month.
• Weekly View — Returns you to the Calendar screen, showing the
current week.
• Daily View — Returns you to the Calendar screen, showing
today’s schedule.
• Erase — Remove this event from the Calendar.
5. Select an option to invoke its function.
3.
highlighted. The month and year appear at the top of the
display.
Tools
96
Memo Pad
Create notes and store them in
Memo Pad. Notes that you create in
Memo Pad can’t be prioritized or
assigned an alert. Return to Memo
Pad anytime to review and edit your
notes.
Create a Memo
97
1.
From the Tools menu, select
Memo Pad. A list of any stored
Memos appears in the
display.
2.
To add a Memo, press the
New Memo soft key. A blank Memo screen appears in the
display.
3.
Enter text for this Memo. (For more information, refer to
“Entering Text” on page 43.)
4.
When you’re finished entering details for the Memo, press
the Done soft key.
5.
Press Save. The Memo is saved.
6.
To discard this Memo, press Erase. You are prompted to
confirm the erasure.
Review, Edit, Erase, and Send Memos
1.
From the Tools menu, select Memo Pad. A list of any stored
Memos appears in the display.
2.
To review a Memo, select it. The text of the Memo appears
in the display in a scrollable screen.
To edit a Memo, select it and press the Edit soft key. The
Memo text appears in a text entry screen. (For more
information, refer to “Entering Text” on page 43.)
• To save your changes and return to the Memo Pad screen, press
the Done soft key.
• To discard your changes and exit Memo Pad, press Erase. You are
prompted to confirm your wish to exit Memo Pad.
4. To erase a Memo, select it and press the Erase soft key.
You are prompted to confirm the erasure.
3.
5.
To send a memo as a text message, select the memo, then
press the Send text message soft key. The memo text
appears in the Text Msg screen as part of the message
text.
Alarm Clock
Your phone has three alarm clocks that you can set to go off
once, or to recur daily at a specific time. Once set, an alarm clock
is easy to change or turn off completely.
Note: The Alarm Clock doesn’t function when the phone is turned off. If the
time for an alarm that was set for Once has elapsed while the phone is
off, the alarm sounds at the specified time on the next day.
Set an Alarm
1.
From the Tools menu, select
Alarm Clock. The Alarm
screen appears in the display,
listing any currently set
alarms.
2.
Press the New Alarm soft key.
The following Alarm options
appear in the display:
• Alarm Name — Populated with
the default name, Alarm. To
change, select this field and
enter a new name. (For more
information, refer to “Entering
Text” on page 43.)
• Alarm Time — Populated with the current time. To change the
time, select this field, select a new time, and press the Set soft key.
• Alarm Repeat — Select the day(s) of the week (Sun – Sat) on
which this alarm is to sound. The alarm will sound every week on
the day(s) selected.
• Alarm Tone — Populated with Alert 1. To change, select this field,
select the preferred ringtone in the My Ringtones screen, then
press the Set soft key.
• Alarm Volume — Press and slide to set to the preferred volume.
• Snooze — Select On to enable snooze timer for this alarm, then
select values for the following options:
– Snooze Duration — Select 1 min, 2 min, 3 min, 5 min, or 7 min.
– Snooze Repeat — Select Once, Twice, 3 Times, 5 Times, or
10 Times.
3. When you’re finished selection option values for the alarm,
press the Save soft key. If the Alarm is set to On, the alarm
icon (
) appears in the top of the display.
When an Alarm Sounds
An animated alarm clock appears in the display and an alert
sounds when the specified time for the alarm arrives.
䊳
To silence the alarm, press and slide
shown) or Stop.
to Snooze (if
Tools
98
Note: If the alarm is set to repeat on one or more days, the alarm icon
remains in the top of the display.
If the alarm was set as a once only alarm (no repeat day selected), the
alarm icon disappears from the top of the display.
Turn Off an Alarm
1.
From the Tools menu, select Alarm Clock. The Alarm screen
appears in the display, listing any currently set alarms.
2.
Press the Off button on the Alarm you wish to turn off.
Erasing an Alarm
1.
From the Tools menu, select
Alarm Clock. The Alarm
screen appears in the display,
listing any currently set
alarms.
2.
Press the Erase soft key. The
Select to erase screen
appears in the display.
3.
99
Select the check box for the
Alarm you want to remove
from the list. A check mark
appears in the selected box.
4.
Press the Erase soft key. The selected Alarm is removed
from the list.
World Time
World Time lets you set up to four
clocks to the time of day or night in
any of the 24 different time zones
around the world.
Note: To use World Time, you need to
subscribe to your Wireless Provider’s
digital service.
䊳
From the Tools menu, select
World Time. A list of your
selected clocks appears in
the display. The following
icons appear in the list:
Indicates the clock set to your home (local) time.
Indicates your 2nd clock.
Note: Your Home and 2nd clocks also appear in the Clock widget. (For more
information, refer to “Widget” on page 107.)
Setting a World Clock
The default home clock is set to the
time in London, England and is
labeled “London”. To change this or
another World Clock setting, do the
following:
1.
From the Tools menu, select
World Time. A list of your
current World Clocks appears
in the display.
Enable Daylight Savings Time (DST)
1.
While viewing the World Time map, press the DST (
soft key to toggle between standard time and daylight
savings time.
)
2.
Press the Add soft key to accept the highlighted setting. If
the DST icon (
) appears in the display, it indicates
that Daylight Savings Time is enabled.
Adding a World Clock
1.
From the Tools menu, select World Time. A list of your
current World Clocks appears in the display.
2.
Press the Add soft key. The Add City screen appears in the
display.
3.
Press and slide the map until you see the city whose time
you wish to select as this clock’s new time.
Press and slide the map until you see the city whose time
you wish to select as this clock’s new time.
4.
4.
Select the city. The displayed time changes to the time for
the selected city.
Select the city. The displayed time changes to the time for
the selected city.
5.
5.
Press the Save soft key. Your choice is saved and you are
returned to the World Clock screen.
Press the Add soft key. Your choice is saved and you are
returned to the World Clock screen.
2.
3.
Select the clock you wish to
set to a new time zone. The
Add City screen appears in
the display.
Tools
100
Selecting Your 2nd Clock
Your 2nd Clock and your Home Clock both appear in the Clock
widget when you move it from the Widget Bar to the standby
screen. By changing your 2nd Clock, you can quickly and easily
keep track of the time in a new city and at home. (For more
information, refer to “Widget” on page 107.)
1.
From the Tools menu, select
World Time. A list of your
current World Clocks appears
in the display.
2.
Press the Set as 2nd Clock
soft key.
3.
Select the World Clock you
prefer as your 2nd Clock. The
2nd check mark moves to
your selection.
4.
Press the OK soft key. Your
selection is saved.
101
Calculator
You can perform calculations,
including addition, subtraction,
multiplication, division, and
percentages using your phone.
1.
From the Tools menu, select
Calculator. The Calculator
screen appears in the display.
2.
Enter the first number in your
calculation using the
calculator-style touch
keypad. (Numbers can be up
to 12 digits long, and can
include a decimal point
followed by up to 3 more digits.)
3.
Select the desired operation. [You can nest calculations
using parentheses “( )”. To delete your last entry, press
.]
4.
Use the keypad to enter the second number for your
calculation.
5.
Press
to perform the calculation and view the result.
Stop Watch
You can use this function to set a
stop watch.
1.
From the Tools menu, select
Stop Watch. The Stop Watch
screen appears in the display.
2.
To start the Stop Watch count,
press the Start soft key.
3.
To record succeeding event/
lap times, press the LAP soft
key at the start of each
succeeding event/lap to
record the completion time
for the previous event/lap.
You can record up to eight event/lap times.
4.
To stop the Stop Watch count, press the Stop soft key.
5.
To resume the Stop Watch count, press the Restart key.
6.
To erase all Stop Watch (lap) times recorded, press the
Reset soft key.
Timer
This is a count down timer that can
count down to an event up to 24
hours in the future and sound an
alarm tone with the count down
time reaches 00:00:00.
1.
From the Tools menu, select
Timer. The Timer screen
appears in the display.
2.
To set the Timer, select the
time until the event in Hrs,
Min, and Sec.
• To start the Timer, press the
Start soft key.
• To stop the Timer, press the Stop soft key.
• To reset the Timer to 00 : 00 : 00, press the Reset soft key.
Converter
The conversion menu provides the following conversion
categories:
• Currency
• Length
• Weight
• Volume
Tools
102
Currency — Reviewing/Editing Exchange Rates
• Area
• Temperature
Using Converters
To convert a currency, length,
weight, volume, area, or
temperature, do the following:
From the Tools menu, select
Converter. The following list of
converters appears in the
display:
• Currency
• Length
• Weight
• Volume
• Area
• Temperature
2. Select the conversion feature you wish to use.
1.
3.
Press the down arrow key and select the units to be
converted from.
4.
Enter the quantity you want converted in the field at the top
of the screen. The converted quantities appear opposite
their respective units of measure.
103
The Currency Converter includes
long-term average exchange rates
as default values. To review and/or
change a default exchange rate to
the current exchange rate, do the
following:
1.
From the Tools menu, select
Converter ➔ Currency.
2.
Press the View Rates soft key.
A list of exchange rates
appears in the display.
3.
Select the exchange rate you
wish to change.
4.
Enter the changed exchange rate value.
5.
Press the Done soft key to save the changed exchange
rate.
Currency — Adding Exchange Rates
You can use the Currency Converter
to convert from and to obscure
currencies by adding exchange
rates for these currencies. To add a
currency and its exchange rate to
the Currency Converter, do the
following:
1.
From the Tools menu, select
Converter ➔ Currency.
2.
Press the View Rates soft key.
A list of exchange rates
appears in the display.
3.
Use the left and right arrow
buttons at the top of the list to display the base currency
for the new exchange rate.
7.
Highlight the exchange rate field.
8.
Enter a decimal exchange rate for the new currency using
the keypad.
Note: The Exchange Rate field only accepts up to five digits after the decimal
point.
9.
To add the new exchange rate to the list, press the Done
soft key.
Currency — Erasing Exchange Rates
You cannot erase the preloaded
currencies from the Exchange Rate
list. You can erase a currency that
you have added to the list by doing
the following:
1.
From the Tools menu, select
Converter ➔ Currency.
4.
Press the Add Rates soft key. A new line containing blank
exchange rate fields appears at the bottom of the
exchange rates list.
2.
Press the View Rates soft key.
A list of exchange rates
appears in the display.
5.
Select the currency identifier field.
3.
6.
Enter an identifier of up to 4 characters for the new
currency. (For more information, refer to “Entering Text”
on page 43.)
Select the user-added
currency exchange rate to be
erased.
Tools
104
4.
Press the Erase Rates soft key. The Erase screen appears in
the display.
Note: The Erase Rates soft key is undefined for preloaded Exchange Rates.
This prevents you from erasing them.
3.
Tap the entry field to the left of the pull-down menu and
enter the number using the keypad.
4.
Press Done. The equivalent weights for each measurement
appear in the display.
5.
Press Reset to clear the numeric fields.
5.
Highlight the exchange rates that you want to erase, or
highlight Select All to erase all the exchange rates that you
have added.
1.
From the Tools menu, select Converter ➔ Volume.
6.
Press the Done soft key.
2.
From the pull-down menu, select the type of volume
measurement you want to convert.
1.
From the Tools menu, select Converter ➔ Length.
3.
2.
From the pull-down menu, select the type of length
measurement you want to convert.
Tap the entry field to the left of the pull-down menu and
enter the number using the keypad.
4.
3.
Tap the entry field to the left of the pull-down menu and
enter the number using the keypad.
Press Done. The equivalent volume for each measurement
appear in the display.
5.
Press Reset to clear the numeric fields.
4.
Press Done. The equivalent lengths for each measurement
appear in the display.
5.
Press Reset to clear the numeric fields.
Volume
Length
Area
1.
From the Tools menu, select Converter ➔ Area.
2.
From the pull-down menu, select the type of area
measurement you want to convert.
3.
Tap the entry field to the left of the pull-down menu and
enter the number using the keypad.
4.
Press Done. The equivalent area for each measurement
appear in the display.
Weight
1.
From the Tools menu, select Converter ➔ Weight.
2.
From the pull-down menu, select the type of weight
measurement you want to convert.
105
5.
Press Reset to clear the numeric fields.
Temperature
2.
Select the Bill field and enter the total amount of the bill.
3.
Select the Tip field and enter a tip percentage.
1.
From the Tools menu, select Converter ➔ Temperature.
4.
2.
From the pull-down menu, select the type of temperature
measurement you want to convert.
Select the # Paying field and enter the number of persons
paying using the keypad.
5.
3.
Tap the entry field to the left of the pull-down menu and
enter the number using the keypad.
The amount of the Tip, the bill Total, and the amount Each
person should pay appear in the lower half of the screen.
4.
Press Done. The equivalent temperature for each
measurement appear in the display.
5.
Press Reset to clear the numeric fields.
Tip Calculator
Tip Calculator automatically
calculates the following amounts:
• Gratuity (tip)
• Individual payment (for groups)
Calculations are based on the total
amount of the check, a selected
gratuity percentage, and the
number of people paying.
1.
From the Tools menu, select
Tip Calculator. The Tip
Calculator screen appears in
the display.
Tools
106
Section 14: Changing Your Settings
This section explains how to customize your phone to suit your
needs and preferences.
Settings Menu
䊳
To access the Settings menu, select Menu ➔ Settings. The
Settings menu appears in the display.
Location
This function identifies your location to the network via the Global
Positioning System (GPS). You can set this function for
continuous operation or to operate only in the event that you dial
911.
Note: Contact your Wireless Provider to determine whether, when, or where
location-based services are available.
From the Settings menu, select Location. The following
options appear in the display:
• On — GPS location setting is on whenever you make or receive a
call, wherever the feature is available.
• Off — GPS location setting is on only when you dial 911.
2. Select the desired Location setting. You’re returned to the
Settings menu.
1.
107
Widget
This function lets you select which
optional widgets appear in the
Widget Bar.
For more information, refer to
“Using Widgets” on page 29.
1.
From the Settings menu,
select Widget. The following
options appear in the display:
• Browser
• Email
• Your Navigator
• ToneRoom
• easyedge
• My Stuff
• Accuweather
• MySpace
• Facebook
• Google Search
• twitter
• YouTube
• MSNBC
• Access Hollywood
• Send Message
• Top 5 Contacts
• Mini Player
• Images
• Calculator
• Clock
• Calendar
• Date
• Alarm
• Sketchpad
• Help
2. To enable/disable a particular widget, select the associated
option in the Widget screen. A check mark appears in/
disappears from the option’s check box.
3.
To enable/disable all available widgets, select Select All/
Unselect All. A check mark appears in/disappears from all
the options’ check boxes.
4.
To save your new settings, select OK. You are returned to
the Settings menu.
Network Access
To operate properly, the following online Widgets require access
to your Wireless Provider’s network:
• AccuWeather
• Google Search
• MSNBC
• Access Hollywood
1.
From the Settings menu, select Widget. The Widget screen
appears in the display.
2.
Press the Network Access soft key. The Network Access
screen appears in the display.
3.
Select the Activation ➔ On setting.
4.
Press the OK soft key.
AccuWeather Setup
The AccuWeather Widget, by default, indicates weather
conditions in Washington, D.C. To change the AccuWeather
Widget display to another location, do the following:
1.
Drag the AccuWeather Widget (
) to
one of the three home screens. The
AccuWeather Widget becomes active, as
shown.
Changing Your Settings
108
2.
Press the weather display, and the detailed AccuWeather
information pop-up appears in the display.
3.
To change the AccuWeather settings, press the Settings
icon in the lower left corner of the pop-up. The
AccuWeather Settings pop-up appears in the display.
4.
To change the location of the weather, press the Location
field. A Location search pop-up appears in the display.
5.
Press the Location field. A text entry screen appears in the
display.
6.
Enter the new location name and press Done. The Location
search pop-up re-appears with the new name in the
Location field.
109
7.
Press the Search button (
). The
search results appear as an extension
to the Location search pop-up.
8.
Use the arrow buttons at the bottom of
the list to find the desired location,
then press it. The AccuWeather
Settings pop-up re-appears in the
display with the selected location
populating the Location field.
9.
Press the Save icon in the lower left corner of the
AccuWeather Settings pop-up. The detailed AccuWeather
information pop-up appears in the display with weather
information from the new location.
10. Press the back arrow key in the lower right corner of the
pop-up. The updated AccuWeather widget appears in the
display.
Display Settings
Using the Display menu, you can set the menu style, set the
Standby mode animation, customize the backlight settings, and
more.
From the Settings menu, select Display Settings. The
following options appear in the display:
• Wallpaper — Lets you choose the picture(s) that display(s) on your
phone when in Standby mode.
• Banner — Lets you create your own personalized greeting that
appears in the display when your phone is in Standby mode.
• Backlight — Lets you set backlight duration and brightness for
your phone’s front display.
2. Select the desired sub-menu. The following sections
describe the Display sub-menus in greater detail.
1.
2.
Press the radio button to the right of a preferred picture or
image to display when the phone is in Standby mode. The
blue dot moves to this button.
3.
To save your choice and return to the Display Settings
menu, press the Set soft key.
Banner
Create your own personalized greeting that appears in the
display while your phone is in Standby mode.
1.
Note: If necessary, press and hold
1.
From the Settings menu, select Display Settings ➔
Wallpaper 1 / 2 / 3 ➔ Wallpaper. A scrollable list of
thumbnail images appears in the display.
to erase an existing banner.
2.
Select the Banner field and enter a word or short phrase
(up to 32 characters) to appear in your phone’s display
while in Standby mode. (For more information, refer to
“Entering Text” on page 43.)
3.
Select the preferred Display setting: On (banner displays),
Off (banner does not display).
4.
Press the Save soft key to save the new/changed banner
and return to the Display Settings menu.
Wallpaper
Wallpaper lets you choose the pictures that appear as
backgrounds in the three pages of your phone’s display while in
Standby mode.
From the Settings menu, select Display Settings ➔ Banner.
The Banner screen appears in the display.
Backlight
Set the duration and brightness of the backlight on your device.
Changing Your Settings
110
Backlight Time
You can set the backlight for your display to remain on or off or to
remain on for a specified period of time.
Note: Prolonged backlight use drains your battery faster.
From the Settings menu, select Display Settings ➔
Backlight ➔ Backlight Time. The following options appear
in the display:
• 7 Seconds
• 15 Seconds
• 30 Seconds
• Always On (this setting uses much more power than the timed
settings)
• Always Dim — Display is always on, but at reduced brightness.
2. Select the desired Backlight Time setting.
1.
Brightness
Brightness lets you adjust the brightness of the backlight.
1.
From the Settings menu, select Display Settings ➔
Backlight ➔ Brightness. The Brightness screen appears in
the display.
2.
To adjust the backlight brightness, press, hold, and slide
the Level button left or right.
111
3.
To save your new setting, press the Save soft key.
Sounds Settings
The Sounds Settings menu provides a variety of options to
customize audio properties for such things as ringers, keypad
tones alerts, and more.
Volume
Volume lets you adjust the loudness of the sounds your device
produces.
From the Settings menu,
select Sounds Settings ➔
Volume. The Volume screen
appears in the display
showing the following
options:
• Master Volume — Controls the
loudness of all phone sounds.
• Messages Volume — Controls
the loudness of the ringtone
played for incoming messages.
• Touch Volume — Controls the
loudness of the tones produced
when you touch the screen.
2. Select the volume option you want to change. The
associated Volume screen appears in the display.
1.
3.
Select the preferred Volume setting:
• High
• Low/Medium
• Vibrate only
• Medium/High
• Low
• Alarm only
• Medium
• 1 beep
• Silence All
4.
To preview your new setting, press the Play soft key. To
end the preview, press the Stop soft key.
5.
To retain your setting, press the Set soft key. Your are
returned to the Volume screen.
6.
To save your new settings and return to the Sound Settings
menu, press the OK soft key.
Ringer Type
You can assign ringer types and melody tones for calls, alarms,
and other alerts, in the Ringer Type sub-menu.
1.
From the Settings menu, select Sounds Settings ➔ Ringer
Type.
The following options appear in the Ringer Type display:
• Voice Calls — Lets you set which ringtone, sound file, and/or one
of a set of ringtones and/or sound files plays when you receive a
voice call.
• Text Message — Lets you set which ringtone or sound file plays
when you receive a Text Message.
• Pic/Video Message — Lets you set which ringtone or sound file
plays when you receive a Picture Message or Video Message.
• Voicemail — Lets you set which ringtone or sound file plays when
you receive a Voicemail message.
2. Select the desired option. A
related, scrollable ringtones
list appears in the display.
3.
To assign a ringtone to the
selected option, select a
ringtone in the list.
To assign a sound file to the
selected option:
• Press the down arrow in the
upper right corner of the screen.
• Select Sounds. A sound files list
appears in the display.
• Select the preferred sound or
record a new sound by pressing the Record New soft key. (For
more information, refer to “Voice Memo” on page 86.)
5. To retain your selection and return to the Ringer Type
screen, press the Set soft key.
4.
6.
To save your new ringer settings and return to the Sound
Settings menu, press the OK soft key.
Changing Your Settings
112
Alerts
You can set your phone to sound an alert whenever you enter or
leave your service area, connect or disconnect a call, as well as
other options.
1.
From the Settings menu, select Sounds Settings ➔ Alerts.
The following Alerts options appear in the display:
• Minute Beep — Sounds an alert ten seconds before each elapsed
minute of a call.
• Roaming — Sounds an alert when you leave your home service
area during a call.
• Call Connect — When you make a call, an alert sounds when the
call is answered.
• Power On — Plays a melody when the phone is being turned on.
• Power Off — Plays a melody when the phone is being turned off.
2. Select the desired Alert option setting (On or Off).
3.
To save your new alert settings and return to the Sound
Settings menu, press the OK soft key.
Key Tone
DTMF Tone Length lets you select the length of the DTMF tones
that the device sends when dialing.
1.
113
From the Settings menu, select Sounds Settings ➔ Key
Tone. The following options appear in the display:
• Tone Level — Set Key Tone level to High, Medium/High,
Medium, Low/Medium, Low, or Silence.
• Tone Length:
– Short — Default setting.
– Long — Select this option if you experience frequent misdialed
numbers.
2. To save your new setting and return to the Sound Settings
menu, press the OK soft key.
Vibrating Alert
Vibrating Alert lets you set your phone to vibrate in sync with
ringtones and melodies your phone plays.
1.
From the Settings menu, select Sounds Settings ➔
Vibrating Alert.
2.
Select On or Off. You are returned to the Sound Settings
menu.
Call Settings
Call Answer
You can select a specific answer mode when you receive an
incoming call.
1.
From the Settings menu, select Call Settings ➔ Call
Answer.
The following call answer settings appear in the display:
• Any Key — Press any key except the
or Left soft key to
answer an incoming call.
• Send Key — Press
to answer an incoming call.
Tip: You can set your phone to answer calls automatically, without any input
from you. (For more information, refer to “Auto Answer” on page 114)
2.
Select the desired call answering method and press the OK
soft key to save your selection.
Call Alert
From the Settings menu, select Call Settings ➔ Call Alert.
The following Call Alert settings appear in the display:
• Ring Only — Phone rings for an incoming call.
• Caller ID + Ring — Phone rings and the display shows caller ID for
an incoming call.
• Name Repeat — Phone repeats displaying Contact name or caller
ID.
2. Select the desired call alerting method and press the OK
soft key to save your selection.
1.
Auto Answer
With Auto Answer enabled, your phone automatically answers
calls after a period of time that you select.
1.
From the Settings menu, select Call Settings ➔ Auto
Answer. The following settings appear in the display:
• Off — Disables automatic answering of calls
• After 1 Second — Phone automatically answers calls after 1
second
• After 3 Seconds — Phone automatically answers calls after 3
seconds
• After 5 Seconds — Phone automatically answers calls after 5
seconds
2. Select the desired call automatic answering setting and
press the OK soft key to save your selection.
Speed Dial
Speed Dial lets you disable the speed dialing function. (For more
information, refer to “Speed Dial Numbers” on page 40.)
From the Settings menu, select Call Settings ➔ Speed Dial.
• On — Enables the speed dial keys.
• Off — Disables the speed dial keys.
2. Select the desired setting and press the OK soft key to save
your selection.
1.
Auto Retry
Auto Retry automatically re-dials a number if the connection fails.
Depending upon your location, the number of times your phone
automatically dials the number may vary.
1.
From the Settings menu, select Call Settings ➔ Auto Retry.
The following settings appear in the display:
Changing Your Settings
114
• Off — Disables automatic re-dialing of numbers
• Every 10 Seconds — Phone automatically re-dials a number
every 10 seconds
• Every 30 Seconds — Phone automatically re-dials a number
every 30 seconds
• Every 60 Seconds — Phone automatically re-dials a number
every 60 seconds
2. Select the desired setting and press the OK soft key to save
your selection.
TTY Mode
Your phone is fully compatible with TTY equipment used by those
who are hearing impaired. TTY equipment is connected to your
phone through the headset connector on the top of the phone.
TTY Mode must be enabled before you can use your phone with a
TTY device.
1.
From the Settings menu, select Call Settings ➔ TTY Mode.
You are prompted to confirm you want to change the
current TTY Mode setting.
Note: The “Enabling TTY may Impair Headset Use and Non-TTY Accessory
Performance.” message pops up when you select TTY Mode.
2.
115
To access the TTY Mode settings, press the Yes soft key. To
return to the Call Settings sub-menu, press the No soft key.
If you press the Yes soft key, the following options appear
in the display:
• TTY Full — Enables TTY mode and disables microphone and
earpiece.
• TTY+Talk (VCO) — Enables TTY mode and microphone.
• TTY+Hear (HCO) — Enables TTY mode and earpiece.
• TTY Off — Disables TTY mode.
4. Select the desired TTY Mode setting and press the OK soft
key to save your selection.
3.
Voice Privacy
Voice Privacy when enabled (that is, set to Enhanced), turns on
advanced voice encryption.
From the Settings menu, select Call Settings ➔ Voice
Privacy. The following options appear in the display:
• Standard — Voice privacy is disabled
• Enhanced — Voice privacy is enabled
2. Select the desired Voice Privacy setting and press the OK
soft key to save your selection.
1.
Hearing Aid Mode
Hearing Aid Mode enable or disable your phone’s Hearing Aid
Compatibility (HAC) support.
1.
From the Settings menu, select Call Settings ➔ Hearing Aid
Mode. The following options appear in the display:
• On
• Off
2. Select the desired hearing aid mode setting and press the
OK soft key to save your selection.
Phone Settings
Airplane Mode
When set to On, Airplane Mode disables all radio functions of your
phone. This prevents you from receiving or making calls (except
emergency calls), but allows you to use other features (such as
the camera and the Tools) safely in sensitive environments, such
as on board an aircraft.
From the Settings menu, select Phone Settings ➔ Airplane
Mode.The following settings appear in the display:
• On — Disables the radio transmitter and receiver in your phone
• Off — Enables the radio transmitter and receiver in your phone
2. Select the desired Airplane Mode setting and press the OK
soft key to save your selection. “Will disable all Incoming
and Outgoing Calls?” displays in a pop-up message. Select
Yes to enable airplane mode, or No to return to menu.
1.
Language
The language option on your phone can change the language of
voice prompts, menus, and key-input.
From the Settings menu, select Phone Settings ➔
Language. The following settings appear in the display:
• English
• Español
2. Select the desired Language setting and press the OK soft
key to save your selection.
1.
Vibration Feedback
When set to On, Vibration Feedback causes your phone to vibrate
as well as play a tone when you press a key, button, or field on
the phone to assure you that your screen press is recognized.
From the Settings menu, select Phone Settings ➔ Vibration
Feedback.The following options appear in the display:
• Activation
– On — Enables vibration feedback.
– Off — Disables vibration feedback.
• Vibration intensity — Push and slide left and right (1 – 5).
2. Select the desired Vibration Feedback settings and press
the Save soft key to save your selection.
1.
Auto Screen Lock
When set to On, Auto Screen Lock feature allows you to lock your
screen to prevent unintentional dialing.
1.
From the Settings menu, select Phone Settings ➔ Auto
Changing Your Settings
116
Screen Lock.The following options appear in the display:
• On — The touch screen is locked when the time set for the
backlight has passed.
• Off — The touch screen remains active whether or not the
backlight is on.
2. Select the desired setting and press the OK soft key to save
your selection.
3.
If the On option is selected, pressing and holding the LOCK
key (
) activates the touch screen.
If the Off option is selected, the touch screen is always
activated unless you press the LOCK key (
).
Security
Use the Security menu to lock your phone, set up emergency
numbers, set restrictions, as well as other security options.
1.
From the Settings menu, select Phone Settings ➔ Security.
You’re prompted to enter the lock code.
Lock Phone
Locking the phone limits all outgoing calls except calls to 911
emergency and the three user-programmable emergency
numbers. You can lock the phone manually during use, or set the
phone to lock automatically when it is turned on. With the phone
in lock mode, you can answer incoming calls, but you must
unlock the phone to place outgoing calls (except to emergency
and secret numbers).
From The Security sub-menu, select Lock Phone. The
following phone Lock mode settings appear in the display:
• Lock — Locks the phone immediately (The phone stays locked
until you enter the lock code.)
• Unlock — Unlocks the phone.
• On Power Up — The phone locks automatically the next time your
phone is powered ON (The phone stays locked until you enter the
lock code.)
2. Select the desired phone Lock mode setting and press the
OK soft key to save your selection.
1.
Note: The default lock code is the last four digits of your telephone number.
2.
117
Select the lock code field, enter the lock code, and press
the OK soft key. The Security sub-menu appears in the
display.
Tip: You can manually lock your phone by pressing
information, refer to “Lock Mode” on page 14.)
. (For more
Change Lock Code
The default lock code for your phone is generally the last four
digits of your phone number. It is advisable to change the default
lock code to a secret code for security purposes.
1.
From The Security sub-menu, select Change Lock Code.
You’re prompted to enter the new lock code.
2.
Enter the new lock code and press the OK soft key. You’re
prompted to re-enter the new lock code for verification.
3.
Enter the new lock code again and press the OK soft key.
Your new Lock Code is stored.
Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
Important!: DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
Remember to always turn your phone on and check for adequate
signal strength before placing a call.
Store Emergency Numbers
Note: Your phone does not allow you to view the Lock Code for obvious
security reasons. If you change the Lock Code, be sure to write down
or memorize the new code.
1.
From The Security sub-menu, select Emergency #.
2.
Select from the three emergency number entries.
Emergency #
3.
Enter an emergency number (up to 32 digits in length),
then press the Done soft key.
Your phone provides the option of storing three emergency
numbers. Each number can be up to 32 digits in length. All
emergency numbers can be manually called at any time, even
when your phone is locked or restricted. This can be a useful
feature for controlling outgoing calls from your phone.
Note: Emergency number 911 is hard-coded into your phone. You can dial
this number any time, even when the phone is locked or restricted. If
you call 911 an audible tone is heard and an Emergency prompt
appears in the display for the duration of the call.
Call Emergency Numbers in Lock Mode
1.
In Standby mode, enter the emergency number.
2.
Press
to place the call.
Emergency Ringback
Emergency Ringback lets you enable or disable the alert tone
your phone plays during an Emergency call.
Changing Your Settings
118
Tip: This feature can be valuable during emergency situations, such as, a
home invasion. Disabling the Emergency call alert tone can prevent a
home invader from locating you by means of that tone.
From The Security sub-menu, select Emergency
Ringback. The following options appear in the display:
• On — Your phone plays an audible alert tone during Emergency
calls.
• Off — Your phone does not play an audible alert tone during
Emergency calls, but does vibrate.
2. Select the desired Emergency Ringback setting.
Note: This procedure does not delete your Photo Gallery. The Photo Gallery
needs to be deleted separately.
2.
1.
Master Reset
Reset Phone returns all Settings to their factory default values.
1.
From The Security sub-menu, select Master Reset. You are
prompted to confirm that you want to restore default
settings (except for the Contacts and Voice Dial).
2.
To return to the Security sub-menu without resetting the
phone, press No. To restore default settings, press Yes.
Erase All Contacts
Erase memory erases your Contacts and Group information
(except Default). This feature is useful if you want to give your
phone to someone else.
1.
119
From The Security sub-menu, select Erase All Contacts. You
are prompted to confirm erasure of all Contacts entries.
To erase all entries, press Yes. To keep the current entries
and return to the Security sub-menu, press No.
Restrictions
Restrictions lets you restrict the use of your phone for outgoing
calls, incoming calls, and calls placed from your Contacts.
1.
From The Security sub-menu, select Restrictions. The
following options appear in the display:
• Calls — Lets you restrict the following call types:
– Incoming — Lets you Allow All incoming calls, Allow incoming calls
only from Contacts, or Allow None (No incoming calls).
– Outgoing — Lets you Allow All outgoing calls, Allow outgoing calls only
to Contacts, or Allow None (No outgoing calls).
• SMS Messages — Lets you restrict the following Text message
types:
– Incoming — Lets you Allow All incoming Text messages or Allow
None (No incoming Text messages).
– Outgoing — Lets you Allow All outgoing Text messages or Allow None
(No outgoing Text messages).
• MMS Messages — Lets you restrict the following Picture and
Video message types:
– Incoming — Lets you Allow All incoming Picture and Video messages
or Allow None (No incoming Picture and Video messages).
– Outgoing — Lets you Allow All outgoing Picture and Video messages
or Allow None (No outgoing Picture and Video messages).
• IP Connection — Lets you Allow All data connections or Allow
None (No data connections).
2. Select the desired Restriction setting(s).
NAM Selection
The Network menu allows you to select NAM (Number
Assignment Module) settings for your phone. You can store two
NAM settings, which are essentially telephone numbers, for your
phone.
From the Settings menu, select Phone Settings ➔ NAM
Selection. The following options appear in the display:
• NAM1 — Your service contract has one phone line.
• NAM2 — Your service contract has two phone lines.
2. Select the desired NAM setting. The phone powers itself
off and back on.
1.
System Select
The System Select menu allows you to select the roaming setting
for your phone.
1.
From the Settings menu, select Phone Settings ➔ System
Select.
The following roaming options appear in the display:
• Home only — Your phone is available for normal operation only
within your designated coverage area.
• Automatic — Your Wireless Provider’s Preferred Roaming List
(PRL) of networks is used to acquire service. If no preferred
networks are found, any digital system is acquired.
2. Select the preferred roaming option, then press the OK soft
key.
Set Time
Use the Set Time option to set the current date and time.
Note: In digital service mode, the Set Time feature is disabled. The network
adjusts time and date automatically.
With Airplane Mode set to On, this function is enabled. In digital service
mode, setting Airplane Mode to Off also disables Set Time. (For more
information, refer to “Airplane Mode” on page 116.)
From the Settings menu, select Phone Settings ➔ Set Time.
The following options appear in the display:
• Set Date
• Set Time
2. Select the desired option.
• For Set Date, the Set Date screen appears in the display.
– Use the up and down arrow buttons to select the current date.
1.
Changing Your Settings
120
– Press the OK soft key to save your date setting.
• For Set Time, the Set Time screen appears in the display.
– Use the up and down arrow buttons to select the current time.
– Press the OK soft key to save your time setting.
Important!: For this calibration process to complete successfully, it is
recommended that you use the stylus to accurately set the new
calibration touch points.
1.
From the Settings menu, select Phone Settings ➔
Calibration. The Calibration screen appears in the display.
Touch Sensitivity lets you adjust how much pressure you must
apply to the screen for the device to react.
2.
To begin calibration of the screen, press the OK soft key. A
series of five crosses appear in the screen.
1.
From the Settings menu, select Phone Settings ➔ Touch
Sensitivity. The Touch Sensitivity screen appears in the
display.
3.
To calibrate the screen, press the center of each cross in
turn.
2.
Press, hold, and slide the Touch Here button left or right to
adjust the screen’s responsiveness to your touch (1 – 5).
3.
Test your setting by applying pressure to the Touch Here
button until it responds.
4.
If desired, repeat steps 3 and 4 until the Touch Sensitivity
setting is acceptable.
5.
To save your new setting, press the Save soft key.
Touch Sensitivity
Calibration
Calibration lets you adjust the screen’s ability to correctly locate
your touch. This should be done only if the device does not
appear to be responding properly to on-screen touches.
121
PC Connection
Lets you select the default type of PC connection you wish to use
to exchange files between a PC and your r850.
Tip: For more information on using PC Connection, contact your service
provider.
1.
At the Phone Settings sub-menu, select PC Connection.
The following options appear in the display:
• USB Mass Storage — Automatically activates when you connect
your phone to a PC with an optional USB Data Cable. Lets you
access your phone’s memory and any optional microSD Memory
Card, if installed, from your PC. (For more information, refer to
“Install a Memory Card” on page 8.)
• No Connection — This option blocks your r520 from connecting
with a PC.
2. Select the preferred PC Connection type.
Gesture
The Gesture settings let you enable or disable specific reactions
to your movements of the phone.
From the Settings menu, select Phone Settings ➔ Gesture.
The following options appear in the display:
• Mute Event — When set to On (the default value), you can mute
an incoming event by turning the phone face down.
• Widget Reset — When set to On (the default value), you can
return all Widgets placed on the Standby screen pages to the
Widge Bar by opening it and shaking the phone.
2. Select the desired Gesture setting(s).
1.
Memory Manager
Memory Manager lets you quickly and easily review and manage
your phone memory usage. To access Memory Manager, do the
following:
䊳
From the Settings menu, select Memory Manager. The
following options appear in the display:
• Phone Memory Usage — Lets you review your phone’s used and
available memory.
• Card Memory Usage — Lets you review a removable Memory
Card’s used and available memory.
• Save Options — Lets you specify whether your images and videos
will be stored in your phone or on an optional Memory Card.
• Phone Memory — Lets you review your phone’s available memory
and manage your files stored there.
• Card Memory — Lets you review a removable Memory Card’s
available memory, manage your files stored there, and format new
Memory Cards.
Phone Memory Usage
Phone Memory Usage lets you review your usage of your phone’s
memory.
From the Settings menu, select Memory Manager ➔ Phone
Memory Usage. The Phone Memory Usage screen appears
in the display showing the following information:
• Total Used memory usage
• Available unused memory
• Images memory usage
• Videos memory usage
• Ringtones memory usage
• Sounds memory usage
• Applications memory usage
• Pic/Video Msg memory usage
2. Press the OK soft key to return to the Memory Manager
menu.
1.
Changing Your Settings
122
Card Memory Usage
Card Memory Usage lets you review your usage of your Memory
Card.
From the Settings menu, select Memory Manager ➔ Card
Memory Usage. The Card Memory Usage screen appears in
the display showing the following information:
• Total Used memory usage
• Available unused memory
• Images memory usage
• Videos memory usage
• Music memory usage
• Other memory usage
2. Press the OK soft key to return to the Memory Manager
menu.
1.
• Music
Select the desired file type. The following storage options
appear in the display:
• Phone — Saves the selected type of files in your phone’s memory.
• Card — Saves the selected type of files in a removable microSD
memory card.
3. Select the desired storage location.
2.
4.
Phone Memory
Phone Memory sub-menus let you list files in your multimedia
folders and let you erase or move files as needed to free up
memory on your phone for reuse.
1.
From the Settings menu, select Memory Manager ➔ Phone
Memory. The Phone screen appears in the display listing
files in the Images folder.
2.
Press the down arrow button. The following options drop
down:
• Images
• Videos
• Ringtones
• Sounds
Save Options
Lets you specify where you want your images and videos stored.
To access Save Options, do the following:
1.
123
From the Settings menu, select Memory Manager ➔ Save
Options. The following file type options appear in the
display:
• Images
• Videos
Press Save to save your selection and return to the Memory
Manager menu.
3.
Select the desired option. A list of all files in the related
folder appears in the display.
Files are listed by name, and each file entry shows the
name of each file.
To erase files, do the following:
• Press the Erase soft key. The Select to erase screen appears in
the display.
• Select the check box for a file you want to erase to mark the file for
erasure. (Press the Select All check box to mark all files for
erasure.)
• Press the Erase soft key. You are prompted to confirm erasure of
the selected file(s).
5. To move files to the Memory Card, do the following:
• Press the Move soft key. The Select to move screen appears in the
display.
• Select the check box for a file you want to move to mark the file for
removal to the Memory Card. (Press the Select All check box to
mark all files for removal.)
• Press the Move soft key. You are prompted to confirm removal of
the selected file(s).
6. Press
to return to the Memory Manager menu.
4.
Card Memory
Card Memory sub-menus let you list files in your multimedia
folders and let you erase or move files as needed to free up
space on your Memory Card for reuse.
1.
From the Settings menu, select Memory Manager ➔ Card
Memory. The Card screen appears in the display listing files
in the Images folder.
2.
Press the down arrow button.
The following options drop down:
• Images
• Videos
• Music
• Other
3. Select the desired option. A list of all files in the related
folder appears in the display.
Files are listed by name, and each file entry shows the
name of each file.
4.
To erase files, do the following:
• Press the Erase soft key. The Select to erase screen appears in
the display.
Changing Your Settings
124
• Select the check box for a file you want to erase to mark the file for
erasure. (Press the Select All check box to mark all files for
erasure.)
• Press the Erase soft key. You are prompted to confirm erasure of
the selected file(s).
5. To move files to Phone Memory, do the following:
• Press the Move soft key. The Select to move screen appears in the
display.
• Select the check box for a file you want to move to mark the file for
removal to Phone Memory. (Press the Select All check box to mark
all files for removal.)
• Press the Move soft key. You are prompted to confirm removal of
the selected file(s).
6. Press
to return to the Memory Manager menu.
Formatting a Memory Card
Formatting a microSD Memory Card erases any data currently on
the card and creates multimedia directories compatible with your
phone. To format a Memory Card, do the following:
1.
From the Settings menu, select Memory Manager ➔ Card
Memory. The Card screen appears in the display.
2.
Press the Format soft key. You are prompted to confirm
formatting of the Memory Card.
125
3.
To format the Memory Card, press Yes. To return to the
Card screen without formatting the Memory Card,
press No.
Section 15: Toneroom
Toneroom is a pre-loaded application that lets you access your
Wireless Carrier’s on-line source for real music ringtones.
Accessing Toneroom
䊳
In Standby mode, press the
Menu soft key, then select
Toneroom. The Tone Room
home page appears in the
display.
Managing Your Tones
䊳
In the Tone Room home page,
selet the My Tones tab. The
My Tones page appears in the
display.
For more information about Tone
Room, contact your Wireless
Provider.
Follow the links on the Tone
Room home page to find,
purchase (if needed), and
download ringtone files.
Toneroom
126
Section 16: Phone Info
This section explains Phone Info options that let you identify the
hardware and software versions of your phone and let you
identify the phone number assigned to your phone.
Phone Number
This option causes the Phone Number screen to appear in the
display and show the ten-digit number assigned to your phone by
your Wireless Provider.
1.
2.
In Standby mode, press the Menu soft key, then select
Phone Info ➔ Phone Number. The phone number assigned
by your Wireless Provider appears in the display.
To return to the Phone Info menu, press
.
Icon Glossary
This option causes the Icon Glossary list to appear in the display
and show the icons that can appear in the display and the names
of the icons.
1.
In Standby mode, press the Menu soft key, then select
Phone Info ➔ Icon Glossary. A list shows of the icons that
can appear on the top line of the display.
2.
To return to the Phone Info menu, press
127
.
Version
You can view both the software and hardware version of your
phone using this feature. This feature is helpful if you need to
contact Customer Service.
1.
In Standby mode, press the Menu soft key, then select
Phone Info ➔ Version.
Your phone’s hardware and software version information
appears in the display.
2.
To return to the Phone Info menu, press
.
ESN / MEID
You can view both the Electronic Serial Number (ESN) and the
Mobile Equipment Identifier (MEID) of your phone using this
feature. This feature is helpful if you need to contact Customer
Service.
1.
In Standby mode, press the Menu soft key, then select
Phone Info ➔ ESN /MEID.
Your phone’s ESN/MEID information appears in the display.
2.
To return to the Phone Info menu, press
.
Section 17: Health and Safety Information
This section outlines the safety precautions associated with using
your phone. These safety precautions should be followed to
safely use your phone.
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the exposure limits for
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. government.
These FCC exposure limits are derived from the
recommendations of two expert organizations, the National
Counsel on Radiation Protection and Measurement (NCRP) and
the Institute of Electrical and Electronics Engineers (IEEE).
In both cases, the recommendations were developed by scientific
and engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature
related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure of the rate of
absorption of RF energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires wireless phones to
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
The FCC exposure limit incorporates a substantial margin of
safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC.
For body worn operation, this phone has been tested and meets
FCC RF exposure guidelines when used with an accessory that
Health and Safety Information
128
contains no metal and that positions the handset a minimum of
1.5 cm from the body.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. The maximum SAR values
for this model phone as reported to the FCC are:
phone. Additional product specific SAR information can also be
obtained at www.fcc.gov/cgb/sar.
Warning Regarding Display
The display on your handset is made of glass or acrylic and could
break if your handset is dropped or if it receives significant
impact. Do not use if screen is broken or cracked as this could
cause injury to you.
Samsung Mobile Products and Recycling
CDMA:
• Head: 0.667 W/Kg.
• Body-worn: 0.637 W/Kg.
Samsung cares for the environment and encourages its
customers to recycle Samsung mobile phones and genuine
Samsung accessories.
PCS:
• Head: 1.03 W/Kg.
• Body-worn: 0.591 W/Kg.
Go to: https://fun.samsungmobileusa.com/recycling/index.jsp for more
information.
SAR information on this and other model phones can be viewed
online at http://www.fcc.gov/oet/ea. To find information that
pertains to a particular model phone, this site uses the phone
FCC ID number which is usually printed somewhere on the case
of the phone.
Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website and it
should provide values for typical or maximum SAR for a particular
129
UL Certified Travel Adapter
The Travel Adapter for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions
per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY
DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS
INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a
series of Questions and Answers for consumers relating to radio
frequency (RF) exposure from wireless phones. The FDA
publication includes the following information:
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called "cell," "mobile," or
"PCS" phones. These types of wireless phones can expose the
user to measurable radio frequency energy (RF) because of the
short distance between the phone and the user's head. These RF
exposures are limited by Federal Communications Commission
safety guidelines that were developed with the advice of FDA and
other federal health and safety agencies.
When the phone is located at greater distances from the user, the
exposure to RF is drastically lower because a person's RF
exposure decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at
far lower power levels, and thus produce RF exposures well
within the FCC's compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels of radio frequency energy (RF) in
the microwave range while being used. They also emit very low
levels of RF when in the stand-by mode. Whereas high levels of
RF can produce health effects (by heating tissue), exposure to
low level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies
have suggested that some biological effects may occur, but such
findings have not been confirmed by additional research. In some
cases, other researchers have had difficulty in reproducing those
studies, or in determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiationemitting consumer products such as wireless phones before they
Health and Safety Information
130
can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level
that is hazardous to the user. In such a case, FDA could require
the manufacturers of wireless phones to notify users of the
health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory
actions, FDA has urged the wireless phone industry to take a
number of steps, including the following:
• Support needed research into possible biological effects of RF of the
type emitted by wireless phones;
• Design wireless phones in a way that minimizes any RF exposure to
the user that is not necessary for device function; and
• Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human
health.
FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
131
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency
working group activities, as well.
FDA shares regulatory responsibilities for wireless phones with
the Federal Communications Commission (FCC). All phones that
are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. FCC relies on FDA and other
health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF
exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless
phones.
Base stations are thus not the primary subject of the safety
questions discussed in this document.
What are the results of the research done already?
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research
methods. Animal experiments investigating the effects of radio
frequency energy (RF) exposures characteristic of wireless
phones have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However, many of
the studies that showed increased tumor development used
animals that had been genetically engineered or treated with
cancer-causing chemicals so as to be pre-disposed to develop
cancer in absence of RF exposure. Other studies exposed the
animals to RF for up to 22 hours per day. These conditions are
not similar to the conditions under which people use wireless
phones, so we don't know with certainty what the results of such
studies mean for human health.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, glioma, meningioma, or acoustic neuroma,
tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
However, none of the studies can answer questions about longterm exposures, since the average period of phone use in these
studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies
of people actually using wireless phones would provide some of
the data that are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large numbers of
animals would be needed to provide reliable proof of a cancer
promoting effect if one exists.
Epidemiological studies can provide data that is directly
applicable to human populations, but ten or more years' followup may be needed to provide answers about some health effects,
such as cancer.
This is because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if they do may be many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at which the
phone is held, or which model of phone is used.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that high
priority animal studies are conducted to address important
Health and Safety Information
132
questions about the effects of exposure to radio frequency
energy (RF).
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields (EMF) Project
since its inception in 1996. An influential result of this work has
been the development of a detailed agenda of research needs
that has driven the establishment of new research programs
around the world. The Project has also helped develop a series of
public information documents on EMF issues.
FDA and Cellular Telecommunications & Internet Association
(CTIA) have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety.
FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations.
CTIA-funded research is conducted through contracts to
independent investigators. The initial research will include both
laboratory studies and studies of wireless phone users. The
CRADA will also include a broad assessment of additional
research needs in the context of the latest research
developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not
know that there is - it is probably very small. But if you are
133
concerned about avoiding even potential risks, you can take a
few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a
person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
• If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the source
of the RF, since the exposure level drops off dramatically with distance.
For example, you could use a headset and carry the wireless phone
away from your body or use a wireless phone connected to a remote
antenna.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless phone
use.
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want to
take steps to lower exposure to radio frequency energy (RF), the
measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and the
RF source will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless phones
at all. For example, the government in the United Kingdom
distributed leaflets containing such a recommendation in
December 2000.
They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to
limit wireless phone use by children was strictly precautionary; it
was not based on scientific evidence that any health hazard
exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that handsfree kits reduce risks. Hands-free kits can be used with wireless
phones for convenience and comfort. These systems reduce the
absorption of RF energy in the head because the phone, which is
the source of the RF emissions, will not be placed against the
head. On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones marketed in
the U.S. are required to meet safety requirements regardless of
whether they are used against the head or against the body.
Either configuration should result in compliance with the safety
limit.
Health and Safety Information
134
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that
accessories that claim to shield the head from those emissions
reduce risks. Some products that claim to shield the user from RF
absorption use special phone cases, while others involve nothing
more than a metallic accessory attached to the phone. Studies
have shown that these products generally do not work as
advertised. Unlike "hand-free" kits, these so-called "shields"
may interfere with proper operation of the phone. The phone may
be forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold devices that
claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims.
According to FTC, these defendants lacked a reasonable basis to
substantiate their claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, FDA helped
develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and
135
defibrillators from wireless telephones. This test method is now
part of a standard sponsored by the Association for the
Advancement of Medical instrumentation (AAMI). The final draft,
a joint effort by FDA, medical device manufacturers, and many
other groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers and
defibrillators are safe from wireless phone EMI. FDA has tested
wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and performance
requirements for hearing aids and wireless phones so that no
interference occurs when a person uses a compatible phone and
a compatible hearing aid at the same time. This standard was
approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful
interference be found to occur, FDA will conduct testing to assess
the interference and work to resolve the problem.
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations
(Updated 12/1/2006):
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/index.html
• National Institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/homepage.html
• World Health Organization (WHO):
http://www.who.int/peh-emf/
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• Health Protection Agency:
http://www.hpa.org.uk/radiation
• US Food and Drug Administration:
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of wireless
phones, one that every user must uphold.
When driving a car, driving is your first responsibility. When using
your wireless phone behind the wheel of a car, practice good
common sense and remember the following tips:
1.
Get to know your wireless phone and its features, such as
speed dial and redial. If available, these features help you
to place your call without taking your attention off the road.
2.
When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
3.
Position your wireless phone within easy reach. Be able to
access your wireless phone without removing your eyes
from the road. If you get an incoming call at an
inconvenient time, let your voice mail answer it for you.
4.
Let the person you are speaking with know you are driving;
if necessary, suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow, ice and even heavy
traffic can be hazardous.
5.
Do not take notes or look up phone numbers while driving.
Jotting down a "to do" list or flipping through your address
book takes attention away from your primary
responsibility, driving safely.
Health and Safety Information
136
6.
7.
Dial sensibly and assess the traffic; if possible, place calls
wireless assistance number when necessary. If you see a
to plan calls when your car will be stationary. If you need to
broken-down vehicle posing no serious hazard, a broken
make a call while moving, dial only a few numbers, check
traffic signal, a minor traffic accident where no one
the road and your mirrors, then continue.
appears injured, or a vehicle you know to be stolen, call
Do not engage in stressful or emotional conversations that
roadside assistance or other special non-emergency
may be distracting. Make people you are talking with
number.
aware you are driving and suspend conversations that
have the potential to divert your attention from the road.
8.
Use your wireless phone to call for help. Dial 9-1-1 or other
local emergency number in the case of fire, traffic accident
or medical emergencies.
9.
10. Call roadside assistance or a special non-emergency
when you are not moving or before pulling into traffic. Try
Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1 or
other local emergency number, as you would want others
"The wireless industry reminds you to use your phone safely when
driving."
For more information, please call 1-888-901-SAFE, or visit our
web-site www.ctia.org.
Important!: If you are using a handset other than a standard numeric keypad,
please call 1-888-901-7233.
Provided by the Cellular Telecommunications & Internet
Association.
Responsible Listening
to do for you.
Caution!: Avoid potential hearing loss.
Damage to hearing occurs when a person is exposed to loud
sounds over time. The risk of hearing loss increases as sound is
played louder and for longer durations.
137
Prolonged exposure to loud sounds (including music) is the most
common cause of preventable hearing loss. Some scientific
research suggests that using portable audio devices, such as
portable music players and cellular telephones, at high volume
settings for long durations may lead to permanent noise-induced
hearing loss. This includes the use of headphones (including
headsets, earbuds, and Bluetooth or other wireless devices).
Exposure to very loud sound has also been associated in some
studies with tinnitus (a ringing in the ear), hypersensitivity to
sound and distorted hearing.
Individual susceptibility to noise-induced hearing loss and
potential hearing problem varies. Additionally, the amount of
sound produced by a portable audio device varies depending on
the nature of the sound, the device settings, and the headphones
that are used. As a result, there is no single volume setting that is
appropriate for everyone or for every combination of sound,
settings and equipment.
• Do not turn the volume up to block out noisy surroundings. If you
choose to listen to your portable device in a noisy environment, use
noise-cancelling headphones to block out background environmental
noise. By blocking background environment noise, noise cancelling
headphones should allow you to hear the music at lower volumes than
when using earbuds.
• Limit the amount of time you listen. As the volume increases, less time
is required before you hearing could be affected.
• Avoid using headphones after exposure to extremely loud noises, such
as rock concerts, that might cause temporary hearing loss. Temporary
hearing loss might cause unsafe volumes to sound normal.
• Do not listen at any volume that causes you discomfort. If you
experience ringing in your ears, hear muffled speech or experience
any temporary hearing difficulty after listening to your portable audio
device, discontinue use and consult your doctor.
You can obtain additional information on this subject from the
following sources:
You should follow some commonsense recommendations when
using any portable audio device:
• Set the volume in a quiet environment and select the lowest volume at
which you can hear adequately.
• When using headphones, turn the volume down if you cannot hear the
people speaking near you or if the person sitting next to you can hear
what you are listening to.
Health and Safety Information
138
National Institute for Occupational Safety and Health (NIOSH)
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Voice: (800) 222-2336
Email: info@audiology.org
Internet: http://www.audiology.org
National Institute on Deafness and Other Communication Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
Email: nidcdinfo@nih.gov
Internet: http://www.nidcd.nih.gov/
395 E Street, S.W.
Suite 9200
Patriots Plaza Building
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-4647)
1-800-CDC-INFO (1-800-232-4636)
Outside the U.S. 513-533-8328
Email: cdcinfo@cdc.gov
Internet: http://www.cdc.gov
1-888-232-6348 TTY
Internet: http://www.cdc.gov/niosh/topics/noise/default.html
Operating Environment
Remember to follow any special regulations in force in any area
and always switch your phone off whenever it is forbidden to use
it, or when it may cause interference or danger.
When connecting the phone or any accessory to another device,
read its user's guide for detailed safety instructions. Do not
connect incompatible products.
139
As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation of the equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating position
(held to your ear with the antenna pointing over your shoulder if
you are using an external antenna).
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
phone. Consult the manufacturer to discuss alternatives.
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained
between a handheld wireless phone and an implantable medical
device, such as a pacemaker or implantable cardioverter
defibrillator, to avoid potential interference with the device.
Persons who have such devices:
• Should ALWAYS keep the phone more than six (6) inches from their
implantable medical device when the phone is turned ON;
• Should not carry the phone in a breast pocket;
• Should use the ear opposite the implantable medical device to
minimize the potential for interference;
• Should turn the phone OFF immediately if there is any reason to
suspect that interference is taking place;
• Should read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
your wireless phone with such a device, consult your health care
provider.
For more information see:
http://www.fcc.gov/oet/rfsafety/rf-faqs.html
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications Commission
(FCC) Report and Order in WT Docket 01-309 modified the
exception of wireless phones under the Hearing Aid Compatibility
Act of 1988 (HAC Act) to require digital wireless phones be
compatible with hearing-aids.
The intent of the HAC Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities.
While some wireless phones are used near some hearing devices
(hearing aids and cochlear implants), users may detect a
buzzing, humming, or whining noise. Some hearing devices are
more immune than others to this interference noise, and phones
also vary in the amount of interference they generate.
Health and Safety Information
140
The wireless telephone industry has developed a rating system
for wireless phones, to assist hearing device users find phones
that may be compatible with their hearing devices. Not all phones
have been rated. Phones that are rated have the rating on their
box or a label located on the box.
The ratings are not guarantees. Results will vary depending on
the user's hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your personal
needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and
are likely to generate less interference to hearing devices than
phones that are not labeled. M4 is the better/higher of the two
ratings.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are
likely to generate less interference to hearing devices than
phones that are not labeled. T4 is the better/higher of the two
ratings.
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you find
this rating. Higher ratings mean that the hearing device is
relatively immune to interference noise. The hearing aid and
wireless phone rating values are then added together.
141
A sum of 5 is considered acceptable for normal use. A sum of 6
is considered for best use.
M3
+
M2
=
5
T3
+
T2
=
5
In the above example, if a hearing aid meets the M2 level rating
and the wireless phone meets the M3 level rating, the sum of the
two values equal M5. This is synonymous for T ratings. This
should provide the hearing aid user with "normal usage" while
using their hearing aid with the particular wireless phone.
"Normal usage" in this context is defined as a signal quality that
is acceptable for normal operation.
The M mark is intended to be synonymous with the U mark. The
T mark is intended to be synonymous with the UT mark. The M
and T marks are recommended by the Alliance for
Telecommunications Industries Solutions (ATIS). The U and UT
marks are referenced in Section 20.19 of the FCC Rules.
The HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information. Switch your phone off in
health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices require
you to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks
in such areas could cause an explosion or fire resulting in bodily
injury or even death.
Users are advised to switch the phone off while at a refueling
point (service station). Users are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants or where blasting
operations are in progress.
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as userprogrammed functions, which cannot guarantee connection in all
conditions. Therefore, you should never rely solely on any
wireless phone for essential communications (medical
emergencies, for example).
Health and Safety Information
142
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone
features are in use. Check with local service providers.
Restricting Children's access to your Phone
To make an emergency call:
FCC Notice
1.
If the phone is not on, switch it on.
2.
Key in the emergency number for your present location (for
example, 911 or other official emergency number).
Emergency numbers vary by location.
3.
Press the
key.
If certain features are in use (call barring, for example), you may
first need to deactivate those features before you can make an
emergency call. Consult this document and your local cellular
service provider.
When making an emergency call, remember to give all the
necessary information as accurately as possible. Remember that
your phone may be the only means of communication at the
scene of an accident; do not cut off the call until given
permission to do so.
143
Your phone is not a toy. Children should not be allowed to play
with it because they could hurt themselves and others, damage
the phone or make calls that increase your phone bill.
FCC Notice and Cautions
The phone may cause TV or radio interference if used in close
proximity to receiving equipment. The FCC can require you to
stop using the phone if such interference cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection Standard
(NFPA-58). For a copy of this standard, contact the National Fire
Protection Association:
NFPA (National Fire Protection Agency)
1 Batterymarch Park
Quincy, Massachusetts
USA 02169-7471
Internet: http://www.nfpa.org
Cautions
Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment, and void your authority to operate this equipment.
Only use approved batteries, antennas and chargers. The use of
any unauthorized accessories may be dangerous and void the
phone warranty if said accessories cause damage or a defect to
the phone.
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending
or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the phone
in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty applicable to the device.
• Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
• Do not store or carry flammable liquids, gases or explosive materials in
the same compartment as the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both installed
or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
• Switch your phone off before boarding an aircraft. The use of wireless
phone in aircraft is illegal and may be dangerous to the aircraft's
operation.
• Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, or legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the
signal strength in your area. Your phone informs you of the
current signal strength by displaying a number of bars next to the
signal strength icon. The more bars displayed, the stronger the
signal.
If you're inside a building, being near a window may give you
better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after searching, a Power
Save feature is automatically activated. If your phone is active, it
periodically rechecks service availability or you can check it
yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays
on the screen. When a signal is found, your phone returns to
Standby mode.
Health and Safety Information
144
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's
turned on, it receives and transmits radio frequency (RF) signals.
When you use your phone, the system handling your call controls
the power level. This power can range from 0.006 watts to 0.2
watts in digital mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized personnel should
service your phone and accessories. Faulty service may void the
warranty.
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
• To ensure that the Hearing Aid Compatibility rating for your phone is
maintained, secondary transmitters such as Bluetooth and WLAN
components must be disabled during a call. For more information,
refer to “Turn Bluetooth On/Off” on page 92.
• If your phone is equipped with an external antenna, hold the phone
with the antenna raised, fully-extended and over your shoulder.
• Do not hold, bend or twist the phone's antenna, if applicable.
• Do not use the phone if the antenna is damaged.
• If your phone is equipped with an internal antenna, obstructing the
internal antenna could inhibit call performance.
• Speak directly into the phone's receiver.
145
• Avoid exposing your phone and accessories to rain or liquid spills. If
your phone does get wet, immediately turn the power off and remove
the battery. If it is inoperable, call Customer Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and may
require additional subscription and/or usage charges. Not all
features are available for purchase or use in all areas.
Downloadable Ring Tones may be available at an additional cost.
Other conditions and restrictions may apply. See your service
provider for additional information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone usage
patterns and conditions. Battery power consumption depends on
factors such as network configuration, signal strength, operating
temperature, features selected, frequency of calls, and voice,
data, and other application usage patterns.
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and battery. If you
suspect damage to the phone or battery, take it to a service center for
inspection.
• Never use any charger or battery that is damaged in any way.
• Do not modify or remanufacture the battery as this could result in
serious safety hazards.
• If you use the phone near the network's base station, it uses less
• Misuse or use of incompatible phones, batteries, and charging devices
power; talk and standby time are greatly affected by the signal
strength on the cellular network and the parameters set by the
network operator.
• Follow battery usage, storage and charging guidelines found in the
user’s guide.
• Battery charging time depends on the remaining battery charge and
the type of battery and charger used. The battery can be charged and
discharged hundreds of times, but it will gradually wear out. When the
operation time (talk time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
• If left unused, a fully charged battery will discharge itself over time.
• Use only Samsung-approved batteries and recharge your battery only
with Samsung-approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave the battery
connected to a charger for more than a week, since overcharging may
shorten its life.
• Do not use incompatible cell phone batteries and chargers. Some Web
sites and second-hand dealers, not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier recommended products and accessories. If
unsure about whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
could result in damage to the equipment and a possible risk of fire,
explosion, leakage, or other serious hazard.
• Extreme temperatures will affect the charging capacity of your battery:
it may require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity and
lifetime of the battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery may temporarily not
work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below
0 °C (32 °F).
• Do not place the phone in areas that may get very hot, such as on or
near a cooking surface, cooking appliance, iron, or radiator.
• Do not get your phone or battery wet. Even though they will dry and
appear to operate normally, the circuitry could slowly corrode and
pose a safety hazard.
• Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object (coin, clip or pen) causes a direct connection
between the + and - terminals of the battery (metal strips on the
battery), for example when you carry a spare battery in a pocket or
bag. Short-circuiting the terminals may damage the battery or the
object causing the short-circuiting.
• Do not permit a battery out of the phone to come in contact with metal
objects, such as coins, keys or jewelry.
Health and Safety Information
146
• Do not crush, puncture or put a high degree of pressure on the battery
• Do not store the phone in cold areas. When the phone warms up to its
as this can cause an internal short-circuit, resulting in overheating.
• Dispose of used batteries in accordance with local regulations. In some
areas, the disposal of batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion batteries, contact your
nearest Samsung authorized service center. Always recycle. Do not
dispose of batteries in a fire.
normal operating temperature, moisture can form inside the phone,
which may damage the phone's electronic circuit boards.
• Do not drop, knock or shake the phone. Rough handling can break
internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong detergents to
clean the phone. Wipe it with a soft cloth slightly dampened in a mild
soap-and-water solution.
• Do not paint the phone. Paint can clog the device's moving parts and
prevent proper operation.
• Do not put the phone in or on heating devices, such as a microwave
oven, a stove or a radiator. The phone may explode when overheated.
• If your phone is equipped with an external antenna, use only the
supplied or an approved replacement antenna. Unauthorized antennas
or modified accessories may damage the phone and violate
regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working properly,
take it to your nearest qualified service facility. The personnel there
will assist you, and if necessary, arrange for service.
Care and Maintenance
Your phone is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will help
you fulfill any warranty obligations and allow you to enjoy this
product for many years.
• Keep the phone and all its parts and accessories out of the reach of
small children.
• Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an electric
shock to you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its moving parts
may be damaged.
• Do not store the phone in hot areas. High temperatures can shorten the
life of electronic devices, damage batteries, and warp or melt certain
plastics.
147
Section 18: Warranty Information
Standard Limited Warranty
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")
warrants to the original purchaser ("Purchaser") that SAMSUNG's
Phones and accessories ("Products") are free from defects in
material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for
the following specified period of time after that date:
Phone
1 Year
Batteries
1 Year
Leather Case
90 Days
Holster
90 Days
Other Phone Accessories
1 Year
What is Not Covered? This Limited Warranty is conditioned upon
proper use of Product by Purchaser. This Limited Warranty does
not cover: (a) defects or damage resulting from accident, misuse,
abuse, neglect, unusual physical, electrical or electromechanical
stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number
removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or damaged due to
normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral
equipment not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance, and
service of Product, or (g) Product used or purchased outside the
United States or Canada.
This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the battery has
been charged by a battery charger not specified or approved by
SAMSUNG for charging the battery, (ii) any of the seals on the
battery are broken or show evidence of tampering, or (iii) the
battery has been used in equipment other than the SAMSUNG
phone for which it is specified.
What are SAMSUNG's Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG's sole
option, without charge to Purchaser, any defective component
part of Product. To obtain service under this Limited Warranty,
Purchaser must return Product to an authorized phone service
Warranty Information
148
facility in an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof of sale
showing the date of purchase, the serial number of Product and
the sellers' name and address. To obtain assistance on where to
deliver the Product, call Samsung Customer Care at 1-888-9874357. Upon receipt, SAMSUNG will promptly repair or replace the
defective Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases,
pouches and holsters will be warranted for a period of ninety (90)
days. All other repaired/replaced Product will be warranted for a
period equal to the remainder of the original Limited Warranty on
the original Product or for 90 days, whichever is longer. All
replaced parts, components, boards and equipment shall
become the property of SAMSUNG.
If SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
149
OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
• THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
• WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
• THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
• COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE
OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing
reflects this allocation of risk and the limitations of liability
contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make additional
warranties binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation, whether
oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.
Warranty Information
150
End User License Agreement for Software
IMPORTANT. READ CAREFULLY: This End User License Agreement
("EULA") is a legal agreement between you (either an individual
or a single entity) and Samsung Electronics Co., Ltd. for software
owned by Samsung Electronics Co., Ltd. and its affiliated
companies and its third party suppliers and licensors that
accompanies this EULA, which includes computer software and
may include associated media, printed materials, "online" or
electronic documentation ("Software"). BY CLICKING THE "I
ACCEPT" BUTTON (OR IF YOU BYPASS OR OTHERWISE DISABLE
THE "I ACCEPT", AND STILL INSTALL, COPY, DOWNLOAD,
ACCESS OR OTHERWISE USE THE SOFTWARE), YOU AGREE TO
BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT
ACCEPT THE TERMS IN THIS EULA, YOU MUST CLICK THE
"DECLINE" BUTTON, DISCONTINUE USE OF THE SOFTWARE.
1. GRANT OF LICENSE. Samsung grants you the following rights
provided that you comply with all terms and conditions of this
EULA: You may install, use, access, display and run one copy of
the Software on the local hard disk(s) or other permanent storage
media of one computer and use the Software on a single
computer or a mobile device at a time, and you may not make
the Software available over a network where it could be used by
multiple computers at the same time. You may make one copy of
the Software in machine-readable form for backup purposes
151
only; provided that the backup copy must include all copyright or
other proprietary notices contained on the original.
2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung reserves
all rights not expressly granted to you in this EULA. The Software
is protected by copyright and other intellectual property laws and
treaties. Samsung or its suppliers own the title, copyright and
other intellectual property rights in the Software. The Software is
licensed, not sold.
3. LIMITATIONS ON END USER RIGHTS. You may not reverse
engineer, decompile, disassemble, or otherwise attempt to
discover the source code or algorithms of, the Software (except
and only to the extent that such activity is expressly permitted by
applicable law notwithstanding this limitation), or modify, or
disable any features of, the Software, or create derivative works
based on the Software. You may not rent, lease, lend, sublicense
or provide commercial hosting services with the Software.
4. CONSENT TO USE OF DATA. You agree that Samsung and its
affiliates may collect and use technical information gathered as
part of the product support services related to the Software
provided to you, if any, related to the Software. Samsung may
use this information solely to improve its products or to provide
customized services or technologies to you and will not disclose
this information in a form that personally identifies you.
5. UPGRADES. This EULA applies to updates, supplements and
add-on components (if any) of the Software that Samsung may
provide to you or make available to you after the date you obtain
your initial copy of the Software, unless we provide other terms
along with such upgrade. To use Software identified as an
upgrade, you must first be licensed for the Software identified by
Samsung as eligible for the upgrade. After upgrading, you may
no longer use the Software that formed the basis for your
upgrade eligibility.
6. SOFTWARE TRANSFER. You may not transfer this EULA or the
rights to the Software granted herein to any third party unless it
is in connection with the sale of the mobile device which the
Software accompanied. In such event, the transfer must include
all of the Software (including all component parts, the media and
printed materials, any upgrades, this EULA) and you may not
retain any copies of the Software. The transfer may not be an
indirect transfer, such as a consignment. Prior to the transfer, the
end user receiving the Software must agree to all the EULA
terms.
7. EXPORT RESTRICTIONS. You acknowledge that the Software is
subject to export restrictions of various countries. You agree to
comply with all applicable international and national laws that
apply to the Software, including the U.S. Export Administration
Regulations, as well as end user, end use, and destination
restrictions issued by U.S. and other governments.
8. TERMINATION. This EULA is effective until terminated. Your
rights under this License will terminate automatically without
notice from Samsung if you fail to comply with any of the terms
and conditions of this EULA. Upon termination of this EULA, you
shall cease all use of the Software and destroy all copies, full or
partial, of the Software.
9. DISCLAIMER OF WARRANTIES. You expressly acknowledge
and agree that use of the Software is at your sole risk and that
the entire risk as to satisfactory quality, performance, accuracy
and effort is with you. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS IS" AND
WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, AND
SAMSUNG AND ITS LICENSORS (COLLECTIVELY REFERRED TO AS
"SAMSUNG" FOR THE PURPOSES OF SECTIONS 9, 10 and 11)
HEREBY DISCLAIM ALL WARRANTIES AND CONDITIONS WITH
RESPECT TO THE SOFTWARE, EITHER EXPRESS, IMPLIED OR
STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY, OF
SATISFACTORY QUALITY OR WORKMANLIKE EFFORT, OF FITNESS
FOR A PARTICULAR PURPOSE, OF RELIABILITY OR AVAILABILITY,
OF ACCURACY, OF LACK OF VIRUSES, OF QUIET ENJOYMENT,
AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SAMSUNG
DOES NOT WARRANT AGAINST INTERFERENCE WITH YOUR
ENJOYMENT OF THE SOFTWARE, THAT THE FUNCTIONS
CONTAINED IN THE SOFTWARE WILL MEET YOUR
Warranty Information
152
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL
BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE
SOFTWARE WILL BE CORRECTED. NO ORAL OR WRITTEN
INFORMATION OR ADVICE GIVEN BY SAMSUNG OR A SAMSUNG
AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY.
SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE
ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON
APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO THESE
EXCLUSIONS AND LIMITATIONS MAY NOT APPLY TO YOU.
10. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN
OTHER DAMAGES. TO THE EXTENT NOT PROHIBITED BY LAW, IN
NO EVENT SHALL SAMSUNG BE LIABLE FOR PERSONAL INJURY,
OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES WHATSOEVER, OR FOR LOSS OF PROFITS, LOSS OF
DATA, BUSINESS INTERRUPTION, OR FOR ANY PECUNIARY
DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO YOUR
USE OR INABILITY TO USE THE SOFTWARE, THE PROVISION OF
OR FAILURE TO PROVIDE SUPPORT OR OTHER SERVICES,
INFORMATION, SOFTWARE, AND RELATED CONTENT THROUGH
THE SOFTWARE OR OTHERWISE ARISING OUT OF THE USE OF
THE SOFTWARE, OR OTHERWISE UNDER OR IN CONNECTION
WITH ANY PROVISION OF THIS EULA, HOWEVER CAUSED,
REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT
153
OR OTHERWISE) AND EVEN IF SAMSUNG HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO
NOT ALLOW THE LIMITATION OF LIABILITY FOR PERSONAL
INJURY, OR OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THIS LIMITATION MAY NOT APPLY TO YOU.
11. LIMITATION OF LIABILITY. Notwithstanding any damages that
you might incur for any reason whatsoever (including, without
limitation, all damages referenced herein and all direct or general
damages in contract or anything else), the entire liability of
Samsung under any provision of this EULA and your exclusive
remedy hereunder shall be limited to the greater of the actual
damages you incur in reasonable reliance on the Software up to
the amount actually paid by you for the Software or US$5.00. The
foregoing limitations, exclusions and disclaimers (including
Sections 9, 10 and 11) shall apply to the maximum extent
permitted by applicable law, even if any remedy fails its essential
purpose.
12. U.S. GOVERNMENT END USERS. The Software is licensed
only with "restricted rights" and as "commercial items"
consisting of "commercial software" and "commercial software
documentation" with only those rights as are granted to all other
end users pursuant to the terms and conditions herein.
13. APPLICABLE LAW. This EULA is governed by the laws of
TEXAS, without regard to conflicts of laws principles. This EULA
shall not be governed by the UN Convention on Contracts for the
International Sale of Goods, the application of which is expressly
excluded. If a dispute, controversy or difference is not amicably
settled, it shall be finally resolved by arbitration in Seoul, Korea in
accordance with the Arbitration Rules of the Korean Commercial
Arbitration Board. The award of arbitration shall be final and
binding upon the parties.
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the entire
agreement between you and Samsung relating to the Software
and supersedes all prior or contemporaneous oral or written
communications, proposals and representations with respect to
the Software or any other subject matter covered by this EULA. If
any provision of this EULA is held to be void, invalid,
unenforceable or illegal, the other provisions shall continue in full
force and effect.
Precautions for Transfer and Disposal
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
To avoid unintended information leaks and other problems of this
sort, it is recommended that the device be returned to Samsung’s
Customer Care Center for an Extended File System (EFS) Clear
which will eliminate all user memory and return all settings to
default settings. Please contact the Samsung Customer Care
Center for details.
Important!: Please provide warranty information (proof of purchase) to
Samsung’s Customer Care Center in order to provide this service
at no charge. If the warranty has expired on the device, charges
may apply.
Customer Care Center:
1000 Klein Rd.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Samsung Telecommunications America, LLC:
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
Important!: If you are using a handset other than a standard numeric keypad,
dial the numbers listed in brackets.
Warranty Information
154
Phone: 1-888-987-HELP (4357)
©2009 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change
without notice.
155
Index
A
Accessing Your Phone’s Tools 88
Airplane Mode 116
Alarm Clock 97
Set an Alarm 98
Turn Off the Alarm 99
When an Alarm Sounds 98
B
Battery
Charging 4
Low Battery Indicator 5
Removal 6
Travel Adapter 5
Bluetooth
Add New Device 93
Settings 94
Turn On/Off 92
Browser 61
C
Calculator 101
Calendar 95
Call Functions
Adjusting the Call Volume 22
Answering a Call 21
Call Log 22
Making a Call — Number Entry
Dialing 18
Making a Call — Speed
Dialing 19
Making a Call — Voice Dialing 20
Call Settings
Auto Answer 114
Auto Retry 114
Call Alert 114
Call Answer 113
Camcorder
Color Effects 75
Options 73
Screen Icons 67
Taking Videos 63
Camcorder mode 16
Camera
Brightness 72 76
Color Effects 70
,
Multi Shot 68
Options 68
Photo Gallery 77
Save Pictures 67
Screen Icons 66
Taking Pictures 63
Zoom 72 77
Camera mode 16
Card Memory
Formatting 125
Management 124
Change Text Entry Modes 45
Contacts List 32
Converters 102
Creating and Sending New Messages
Picture (Pic) Message 50
Text Message 49
Video Message 52
,
D
Display Settings
Backlight 111
Banner 110
Wallpaper 110
156
E
Emergency Calls 18
Entering Text 43
Entering Numbers 47
Entering Symbols 47
Using T9 Mode 46
Erase voice memos 87
F
File Save Options 123
Formatting a Memory Card 125
Formatting a microSD Card 125
G
Gallery, photo 77
Getting Started
Activating Your Phone 6
Understanding this User
Manual 4
Voicemail 7
H
HAC 140
Handwriting Recognition 44
Health and Safety Information 128
I
Icon Glossary 127
157
Image Shuffle
Wallpaper 110
In-Use Menu 30
K
Key Tone 113
L
Language 116
Lock Mode 14
M
Making a Call
Number Entry Dialing 18
Speed Dialing 19
Voice Dialing 20
Melody Shuffle
Ringer Type 112
Memo Pad 97
Memory Card
Formatting 125
Installing 8
Removing 8
Menu Navigation
In-Use Options 30
Return to Previous Menu 29
Message Folders
Drafts folder 57
Inbox 56
Messages and Lock Mode 56
Outbox 56
Voicemail 58
Message Send Options 54
Message Setting 58
Messaging
Erasing Messages 58
Message Settings 58
microSD
Formatting 125
Installing 8
Removing 8
Mode
Camcorder 16
Camera 16
M-Ratings 141
Multimedia 82
Music Player 79
N
NAM selection 120
Notes and tips 4
Notes, description 4
Number Entry Dialing 18
P
Personal Organizer
Voice Memo 86
Phone
Command Keys 11
Display Screen 12
Display Screen Icons 13
Features 9
Modes 13
View,Closed 9
Phone Info
Icon Glossary 127
Phone Number 127
Version 127
Phone Memory
Usage Info 123
Phone Number 127
Phone Safety 139
Phone Settings
Airplane Mode 116
Language 116
NAM selection 120
Set Time 120
System Select 120
Photos
Sending 78
Picture (Pic) Message 50
Picture Messages
Send in Camera Mode 51
Q
Quality, pictures 69
Quality, videos 74
QWERTY Keypad 43
R
Receiving New Messages 54
While in a Call 55
Record memos 86
Return to Previous Menu 29
Ringer Volume Setting 15
Roaming 27
S
SAR values 128
Save pictures 67
Screen Layouts 65
Security Settings
Change Lock 118
Emergency # 118
Erase Contacts 119
Lock Phone 117
Resetting Your Phone 119
Restriction 119
Set Time 120
Settings
Call Settings 113
Display 110
Phone 116
Security 117
Sound 111
Setup
Location 107
Voicemail 55
Shutter sound 72
Silent Mode 15
Sound Settings
Alerts 113
Key Tone 113
Ringer Type 112
Speed Dialing 19
One-Touch Dialing 19
Two-Touch Dialing 19
Standard Limited Warranty 148
Standby Mode 14
Stop Watch 102
158
T
Taking pictures and videos 63
Text Conventions 4
Text Entry Mode 45
Changing 45
Text message 49
Text Modes
Changing 45
Tip Calculator 106
Tip, description 4
Tools
Alarm Clock 97
Bluetooth 92
Calculator 101
Calendar 95
Converter 102
Memo Pad 97
Stop Watch 102
Tip Calculator 106
World Time 99
Tools Menu
Accessing 88
T-Ratings 141
TTY Mode 115
159
U
UL Certification 129
Understanding Your Contacts
Adding a New Contact Entry 32
Deleting a Contact Entry 41
Editing an Existing Contact
Entry 37
Finding a Contact Entry 36
Memory 42
Pauses 38
Using Abc Mode 47
V
Version 127
Video Message 52
Voice Dialing 20
Voice Memo 86
Erase all memos 87
Record memos 86
Review memos 87
Voice Service
Command Tips 89
Commands 88
Making a Call 20
Settings 89
Voicemail
Checking 55
Listening To 7
Setup 55
VoiceSignal
Voice Memos 86
W
Wallpaper 110
Warranty Information 148
World Time 99

Top types

Top brands

Top types

Top brands

Top types

Top brands

Top types

Top brands

Top types

Top brands

Top types

Top brands

Top types

Top brands

Top types

Top brands

Top types

Top brands

Top types

Top brands

Top types

Top brands

Top types

Top brands

Top types

Top brands

Download Samsung SCH-R850 User manual