Download Craftsman 917.25024 Operator`s manual
Transcript
Operator's Manual ICR.FT. M.N ° IIIII IIIIII I II]]ll GARDEN TRACTOR 26.0 HR* 54" Mower ElectricStart 6 Speed Transaxle Model No. 917.25024 • EspaSol, p. 36 4 I _ l This product has a low emission engine which operates differently from previously built engines. Before you start the engine, read and understand this Operator's Manual. IMPORTANT: For answers to your questions Read and follow all Safety Rules and Instructions before operating this equipment. about this product, Call: 1-800-659-5917 Sears Craftsman Help Line 5 am - 5 pro, Mon- Sat Gasoline containing up to 10% ethanol (El0) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (El0) will void the product warranty. Esta m_quina puede utilizar gasolina con un contenido de hasta el 10% de etanol (El0). El uso de una gasolina que supere el 10% de etano| (El0) anular_, la garant{a del producto. Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A. Visit our Craftsman 446649 website:www.sears.comicraftsman *_ ratedbytheenginemanufacturer Warranty .................................................. 2 Safety Rules ............................................ 3 Product Specifications ............................. 6 Assembly/Pre-Operation ......................... 8 Operation ............................................... 13 Maintenance Schedule .......................... 20 Maintenance .......................................... 20 Service and Adjustments ....................... 25 Storage .................................................. 30 Troubleshooting ..................................... 31 Sears Service .......................... Back Cover Craftsman Riding Equipment Warranty CRAFTSMAN FULL WARRANTY FOR TWO YEARS from the date of purchase, all non-expendable parts of thisriding equipment are warranted against any defects in material or workmanship. A defective non-expendable part wilt receive free in-home repair or replacement if repair is impossible. FOR FIVE YEARS from the date of purchase, the frame and front axle of this riding equipment are warranted against any defects in material or workmanship. A defective frame or front axle will receive free in-home repair or replacement if repair is impossible. FOR 90 DAYS from the date of purchase, the battery (an expendable part) of this riding equipment is warranted against any defects in materiat or workmanship (our testing proves that it will not hold a charge). A defective battery will receive free in-home replacement. ADDITIONAL LIFETIME LIMITED WARRANTY on CAST IRON FRONT AXLE (if equipped) FOR AS LONG AS IT IS USED by the original owner after the fifth year from the date of purchase, the cast iron front axle (ff equipped) of this riding equipment is warranted against any defects in material or workmanship, With proof of purchase, a defective cast front axle will receive free in-home replacement. WARRANTY SERVICE For warranty coverage detaiJs to obtain free repair or replacement, call 1-800-659-5917 or visit the web site: www.craftsman.com In all cases above, if part repair or replacement is impossible, the riding equipment will be replaced free of charge with the same or an equivalent model. All of the above warranty coverage is void if this riding equipment is ever used while providing commercial services or if rented to another person. This warranty covers ONLY defects in material and workmanship, Warranty coverage does NOT include: • Expendable parts (except battery) that can wear out from normal use within the warranty period, including but not limited to blades, spark plugs, air cleaners, belts, and oil filters. • Standard maintenance servicing, oil changes, or tune-ups. • Tire replacement or repair caused by punctures from outside objects, such as nails, thorns, stumps, or glass. • Tire or wheel replacement or repair resulting from normal wear, accident, or improper operation or maintenance, • Repairs necessary because of operator abuse, including but not limited to damage caused by towing objects beyond the capability of the riding equipment, impacting objects that bend the frame, axle assembly or crankshaft, or over-speeding the engine. • Repairs necessary because of operator negligence, including but not limited to, electrical and mechanical damage caused by improper storage, failure to use the proper grade and amount of engine oit, failure to keep the deck clear of flammable debris, or failure to maintain the dding equipment according to the instructions contained in the operator's manual. • Engine (fuel system) cleaning or repairs caused by fuel determined to be contaminated or oxidized (stale). In general, fuel should be used within 30 days of its purchase date. • Normal deterioration and wear of the exterior finishes, or product label replacement. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears Brands Management Corporation, Hoffman Estates, IL 60179 _DANGER: This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. ,_ILWARNING: In orderto prevent accidental starting when setting up, transporting, adjusting or making repairs, always disconnect spark plug wire and place wire where it cannot contact spark plug. o _LWARNING: Do not coast down a hill in neutral, you may lose control of the tractor. - _WARNING: Tow only the attachments that are recommended by and comply with specificationsof the manufacturer of your tractor. Use common sense when towing. Operate only at the lowest possible speed when on a slope, Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor. 4[(_IbWARNING:Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. _[_t,WARNING: Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm, Wash hands after handling, I. G EN ERAL OPERATION • Read, understand, and follow all instructions on the machine and in the manual before starting. • Do not put hands or feet near rotating parts or under the machine, Keep clear of the discharge opening at all times. • Only allow responsible adults, who are familiar with the instructions, to operate the machine, • Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrownby the blades. • Be sure the area is clear of bystanders before operating. Stop machine ifanyone enters the area. • Never carry passengers, • Do not mow in reverse unless absolutely necessary. Always look down and behind before and while backing. • • • • , • • • • • • Neverdirect discharged materialtoward anyone. Avoid discharging material against a wall or obstruction. Material may ricochet back toward the operator, Stop the blades when crossing gravel surfaces. Do not operate machine without the entire grass catcher, discharge chute, or other safety devices in placeandworking. Slow down before turning. Never leave a running machine unattended. Always turn off blades, set parking brake, stop engine, and remove keys before dismounting. Disengage blades when not mowing. Shut off engine and wait for all parts to come to a complete stop before cleaning the machine, removingthe grasscatcher, or unclogging the discharge chute. Operate machineonty in daytightor good artificiallight. Do not operatethe machine while under the influence of alcohot or drugs. Watch for traffic when operating near or crossing roadways. Use extracarewhen loading or unloading the machine into a trailer or truck. Always wear eye protection when operating machine. Data indicates that operators, age 60 years and above, are involved in a large percentage of ridingmower-related injuries, These operators should evaluate their ability to operate the riding mower safely enough to protect themselves and othersfrom serious injury. Followthe manufacturer's recommendation forwheelweights or counterweights. Keep machine free of grass, leaves or other debris build-up which can touch hot exhaust! engine parts and burn, Do not allow the mower to plow leaves or other debris which can cause build-up to occur. Clean any oif or fuel spillage before operating or storing the machine. Allow machine to cool before storage, II. SLOPE OPERATION Slopes are a major factor related to loss of control and tip-over accidents, which can result in severe injury or death, Operation on all slopes requires extra caution. If you cannot back upthe slope or ifyou feel uneasy on it, do not mow it. • Mow up and down slopes, not across. • Watch for holes, ruts, bumps, rocks, or other hidden objects. Uneven terrain could overturn the machine. Tall grass can hide obstacles, - Choose a low ground speed so that you will not have to stop or shift while on the slope. • Do notmow on wetgrass, Tires maylose traction. Always keep the machine in gear when going down slopes, Do not shiffto neutral and coast downhill. • Avoid starting, stopping, or turning on a slope, lfthe tires Iosetraction, disengage the blades and proceed slowly straight down the slope, • Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction, which could cause the machine to roll over. • Use extra care while operating machine with grass catchers or other attachments; they can affect the stability of the machine, Do no use on steep slopes. • Do not try to stabilize the machine by putting your foot on the ground. • Do not mow near drop-offs, ditches, or embankments. The machine could suddenly roll over if a wheel is over the edge or if the edge caves in. III. CHILDREN _IbWARNING: CHILDREN CAN BE INJURED BYTHIS EQUIPMENT.The American Academy of Pediatrics recommends that children be a minimum of 12 year of age before operating a pedestrian controlled lawn mower and a minimum of 16 years of age before operating a riding lawn mower. Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity, Never assume that children will remain where you Fast saw them. • Keep children out of the mowing area and in the watchful care of a responsible adult other than the operator. • Be alert and turn machine off if a child enters the area, ° Before and while backing, look behind and down for small children. Nevercarry children, even with the blades shut off. They may fall offand beserieusly injured or interfere with safe machine operation. Children who have been given rides in the past may suddenly appear in the mowing area for another ride and be run over or backed over bythe machine. • Never allow children to operate the machine. • Use extra care when approaching blind corners, shrubs, trees, or other objects that may block your view of a child. IV. TOWING • Tow only with a machine that has a hitch designed for towing. Do not attach towed equipment except at the hitch point. • Followthe manufacturer's recommendation for weight limitsfor towed equipment and towing on slopes. - Never allow children or others in or on towed equipment. • Qn slopes, theweight ofthetowed equipment may cause loss of traction and loss of control. • Travel slowly and allow extra distance to stop, V, SERVICE SAFE HANDLING OF GASOLINE To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. • Extinguish all cigarettes, cigars, pipes, and other sources of ignition. • Use only approved gasoline container. • Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling. • Never fuelthe machine indoors. • Never store the machine or fuel container where there is an open flame, spark, or pilot light such as on a water heater or other appliances. • Never fill containers inside a vehicle or on a truck or trailer bed with plastic liner, Always place containers on the ground away from your vehicle when filling. • Remove gas-powered equipment from • thetruckortrailerandrefuel itonthe ground. Ifthisisnotpossible, thenrefuel • such equipmentwith aportable container, ratherthanfroma gasoline dispenser nozzle. , Keep thenozzle incontact withtherim • ofthefueltankorcontainer opening at alltimesuntilfueling iscomplete. Donot useanozzle lock-open device. • • Iffuelisspilled onctothing, changeclothingimmediately. • • Neveroverfilifueltank. Replace gascap andtighten securely. GENERAL SERVICE • • • • • • • • Never operate machine in a closed area. Keep all nuts and bolts tightto be sure the equipment is in safe working condition. Maintain or replace safety and instruction labels, as necessary, Be sure the area is clear of bystanders before operating. Stop machine ifanyone enters the area. Never carry passengers. Do not mow in reverse unless absolutely necessary. Always look down and behind before and while backing. Never carry children, even with the blades shut off. They may fall off and be seriously injured or interferewith safe machine operation. Children who have been given rides inthe past may suddenly appear in the mowing area for another ride and be run over or backed over by the machine. Keep children out of the mowing area and inthe watchful care of a responsible adult other than the operator. • • • • • • • • Nevertamperwith safetydevices. Check their proper operationregularly. Keep machine free of grass, leaves, or other debris build-up. CIean oil or fuel spillage and remove any fuel-soaked debris. Allow machineto cootbeforestodng. If you strike a foreign object, stop and inspectthe machine, Repair, ffnecessary, before restarting. Never make any adjustments or repairs with the engine running, Check grass catcher components andthe discharge chute frequently and replace with manufacturer's recommended parts, when necessary. Mowerbladesaresharp, Wraptheblade or wear gloves, and use extra caution when servicing them. Checkbrakeoperationfrequently. Adjust and service as required. Be alert and turn machine off if a child enters the area. Before and while backing, look behind and down for small children, Mow up and down slopes (15° Max), not across. Choose a low ground speed so that you will not have to stop or shift while on the slope. Avoid starting, stopping, or turning on a slope. Ifthetireslosetraction, disengage the blades and proceed slowly straight down the slope. tf machine stops while going uphill, disengage blades, shift into reverse and back down slowly. Do notturn onslopes unless necessary, and then, turn slowly and gradually downhill, if possible. When loading or unloading this machine, do not exceed the maximum recommended operation angle of 15° . PRODUCT SPECIFICATIO NS In the state of California the above is req u ired by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands, A spark arrestor for the muffler is available through your nearest Sears service center (See REPAIR PARTS manual). Gasoline Capacity 4.0 Gallons/t 5,14 L and type: Regular Unleaded Oil Type: (AP]: SG-SL) Oil Capacity: SAE 10W30 (above32°F/0°C SAE 5W30 (below 32°F/0"C 64 Oz./1,96 L Spark Plug: Champion RC12YC (Gap: .030"/0.76 ram) Forward: 1st 1.0/1,6 2nd 1.4/2,3 3rd 2.1/3,4 4th 3.1/5,1 5th 4.0/6,4 6th 5.1/8,2 Reverse: 0 - 1.6/2,6 Ground Speed (Mph/Kph): Charging System: Battery: REPAIR 15 Amps @ 3600 RPM AmpiHr: 28 Min. CCA: 230 Case size: U1R Here's what's included in the Agreement: CONGRATULATIONS on yourpurchase of a new tractor. It has been designed, engineered and manufactured to give you the best possible dependability and performance. Should you experience any problem you cannot easily remedy, please contact aSears or other qualified servicecenter. We havecompetent, well-trained representatives and the proper tools to service or repair this tractor. Please read and retain this manual. The instructions will enable you to assemble and maintain your tractor properly. Always observe the "SAFETY RULES'. Expert service byour 12,000professional repair specialists. RESPONSIBILITIES • Read and observe the safety rules. • Follow a regular schedule in maintaining, caring for and using your tractor. ° Follow instructions under "Maintenance" and "Storage" sections of this manual. • Wear proper Personal Protective Equipment (PP E) while operating this machine, including (at a minimum) sturdy footwear, eye protection, and hearing protection. Do not mow in shorts and/or open toed footwear, . Always letsomeone mowing. knowyou AGREEMENTS Purchase a Repair Protection Agreement now and protect yourself from unexpected hassle and expense. Blade Bolt Torque; 45-55 Ft. Lbs.!62-75 Nm CUSTOMER PROTECTION Congratulations on making a smart purchase. "four new Craftsman® product is designed and manufactured for years of dependable operation. But like all products, it may require repair from time to time. That's when having a Repair Protection Agreement can save you money and aggravation, • Unlimited service and no chargefor parts and labor on all covered repairs. • Product replacement if your covered product can't be fixed. • Discount of 10% from regular price of service and service-related parts not covered bythe agreement; also, 10% off regular price of preventive maintenance check. • Fast help by phone - phone support from a Sears representative on products requiring in-home repair, plus convenient repair scheduling. Once you purchasethe Agreement, a simple phone call is all that it takes for you to schedule service. You can call anytime day or night, or schedule a service appointment online, Sears has over 12,000 professional repair specialists, who have access to over 4.5 million quality parts and accessories, That's the kind of professionalism you can count on to help prolong the life of your new purchase for years to come. Purchase your Repair Protection Agreement today! are outside _WARNtNG: This tractor is equipped with an internal combustion engine and should not be used on or near any unimproved forestcovered, brush-covered or grass-covered land unless the engine's exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If aspark arrestor is used, it should be maintained in effective working order by the operator. Some limitations and exclusions apply. For prices and additional information call 1-800-827-6655. SEARS INSTALLATION SERVICE For Sears professional installation of home appliances, garage door openers, water heaters, and other major home items, inthe U.S.A. call 1-800-4-MY-HOME® 6 © Mower Mower Front Wheel (2) Rear _'_'_ Lift Link (5) 1.3/16 O.D. Washers (1) Shoulder Bolt (1) 1-1/40.D. Washer Assemblies (1) Small Retainer Springs @ (1) Front _, Lift Link Assembly "%, (1) Wheel % (1)3/8-16 Locknut Retainer Springs (1) Oil Drain Tube If Equipped Keys (1) Anti-Sway Bar (1) 3/40,D. Washers (2) Keys (1) Small Retainer Springs 7 Slope Sheet Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness. ADJUST SEAT t. Sit in seat. TOOLS REQUIRED FOR ASSEMBLY 2. Lift up adjustment lever (A) and slide seat A socket wrench set will make assembly until a comfortable position is reached easier, Standard wrench sizes are listed. which allows you to press clutch/brake (2) 7/16" wrenches Utility knife pedal all the way down. (1) 1/2" wrench Tire pressure gauge 3. Release lever to lock seat in position. (1) 3/4" wrench Pliers (1) 3/4" socket w/drive ratchet (1) 9/16" wrench Flashlight When right or left hand is mentioned in this manual,itmeanswhenyouareintheoperating position (seated behind the steering wheel). TO REMOVE TRACTOR FROM CARTON UNPACK CARTON • Remove all accessible loose parts and parts cartons from carton. • Cut along dotted lines on all four panels of carton. Remove end panels and lay side panels flat. • Remove mower and packing materials. • Check for any additional loose parts or cartons and remove, BEFORE REMOVING TRACTOR FROM SKID TO CHECK BATTERY 1. Lifthood to raised position. NOTE: if this battery is put intoservice after month and year indicated on label (label is located between terminals) charge battery for minimum of one hour at 6q 0 amps, (See "BATTERY" in Maintenance section of this manual for charging instructions). , Forbatteryand batterycableinsta!lationsee "REPLACING BATTERY" inthe "Service and Adjustments" section inthis manual, NOTE: You may now roll your tractor off the skid. Follow the instructions below to remove the tractor from the skid. WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual, Be sure tractor is in a well-ventilated area, Be sure the area in front of tractor is clear of other people and objects. TO ROLL TRACTOR OFF SKID (See Operation section for location and function of controls) 1, Raise attachment lift lever to its highest position. 2. Release parking brake by depressing clutch/brake pedal. 3. Place gearshift lever in neutral position, 4. Roll tractor forward off skid. Continue with the instructions that follow, TO INSTALL MOWER 1. SET PARKING BRAKE LEVER AND LOWER ATTACHMENT LIFT LEVER Depress clutch/brake pedal all the way down and hold. Pull parking brake lever up and hold, release pressure from clutch/brake pedal, then release parking brake lever. Pedal should remain in brake position. Ensure parking brake will hold tractor secure. ,,j abel Brake Lever _JlkCAUTION: Lift lever is spring loaded. Have a tight grip on lift lever, lower it slowly and engage in lowest position. Lift lever is located on ]eft side of fender. 3. TURN STEERING WHEEL LEFT AND POSITION MOWER • Turn steering wheel to the leTtas far as it will go and position mower on right side of tractor with deflectorshield (Q)tothe right. Lift Lever 2. ASSEMBLE Front FRONT GAUGE WHEEL (W) TO FRONT OF MOWER _"_Transaxle Q. Deflector Shield [ H. W. X. Y. Z. Front Mower Bracket Front Gauge Wheel Shoulder Bolt 1-1/40.D, Washer 3/8-16 Locknut 4. SLIDE MOWER UNDER TRACTOR • Bring belt forward and check belt for properrouting inallmowerpulleygrooves. NOTE: Be sure mower side suspension arms (A) are pointing forward before sliding mower under tractor. • Slide mower under tractor until it is centered under tractor. ® A. B. C. D. E. E H. Mower Side Suspension Arms Retainer Spring Rear Lift Link(S) Right Side Rear Mower Bracket Front Lift Link Assembly Front Suspension Bracket Front Mower Bracket I, K. L. M, Q. S. W. Left Side Rear Mower Bracket Belt Tension Rod Locking Bracket Engine Clutch Pulley Deflector Shield Anti-Sway Bar Front Gauge Whee[ Pivot the integrated washer end of antisway bar (S)towards mower deck bracket on right side of mower. Insert integrated washer end of bar into hole i nrear mower bracket (D). Move mower as needed to insert integrated washer end of bar into rear mower bracket (D). Secure with small washer and small retainer spring as shown. A, Mower Side Suspension Arms Q.Deflector Shield 5. INSTALL ANTI-SWAY BAR (S) (IF EQUIPPED) _ ANTI-SWAY Towards Transaxle 90° End BAR (S) Towards Mower Deck D. RightSide RearMower Bracket S. Anti-Sway Bar T. TransaxleBracket IntegratedWasher End ° From right side of mower, first insert 90 ° end of anti-sway bar (S) into hole in transaxle bracket (T), located near left rear tire in front of transaxle. NOTE: Flashlight may be helpful. Anti-Sway Bar (S) ii _,,-,.,," _._.,> i,<-f _................ J _ 6. ATTACH MOWER SIDE SUSPENSION ARMS (A) TO CHASSIS • Position front hole inside suspension arm (A) over pin on outside of tractor chassis and secure with large washer and large retainer spring (B). • Repeat on opposite side of tractor. ,_ Transaxle Bracket t_ Located Between Rear Tires t o A. MowerSide SuspensionArms B. RetainerSpring D. RightSide Rear MowerBracket 7. ATTACH REAR LIFT LINKS (C) • Insert rod end of rear lift link (C) into hole (U) in tractor lift shaft suspension arm and pivot link down to mower, • Lift rearcorner of mower and position slot in link assembly over pin on rear mower bracket (D) and secure with large washer and large retainer spring. • Repeat on opposite side of tractor. NOTE: Dependingon model, bracket (_ may be differentthan shown but hole for anti-sway bar will be in same position/location. 10 9 • • INSTALL BELT ON ENGINE CLUTCH PULLEY (M) Disengage belt tension rod (K) from locking bracket (L). Install belt onto engine clutch pulley (M), C, Rear Lift Link(s) D. Right Side Rear Mower Bracket U. Hole 8 • A-I-I-ACHFRONT LINK (E) Turn steering wheel to position wheels straight forward. • From front of tractor, insert rod end of front link (E) through front hole in tractor front suspension bracket (F), • Moveto left side of mower and and insert large retainer spring (G) through hole in front link (E) behind front suspension bracket (F). - Insert other end of ]ink (E) into hole in front mower bracket (H) and secure with washer and small retainer spring (J). NOTE: Requires deck lifting. Front Link / M.Engine Clutch Pulley IMPORTANT: Check belt for proper routing in all mower pulley grooves and under mandrel covers. • Engage belt tension rod (K) on locking bracket (L). _I_CAUTION: Belt tension rod is spring loaded, Have atight grip on rod and engage slowly. • Raise attachment lift lever to highest position. • If necessary, adjust gauge wheels before operating mower as shown in the Operation section of this manual, MOWER DRIVE BELT INSTALLATION Follow procedure described in "TO REPLACE MOWER BLADE DRIVE BELT" in the "Service and Adjustments" section of this manual. =_. Front Uff Link Assembly E Front Suspension Bracket G, Large Retainer Spring H. Front Mower Bracket J, Small Retainer Spring M. Engine Clutch Pulley 11 CHECK TIRE PRESSURE The tires on your tractor were over-inflated atthe factory for shipping purposes. Correct tire pressure is important for best cutting performance. - Reducetire pressure to PSI shown on tires. t_CHECKLIST Before you operate your new tractor, we wish to assure that you receive the best performance and satisfaction from this Quality Product. CHECK DECK LEVELNESS For best cutting results, mower housing should be properly leveled. See "TO LEVEL MOWER" in the Service and Adjustments section of this manual. Please review the following checklist: All assembly instructions have been completed. No remaining loose paris in carton. J" Battery is properly prepared and charged. Seat is adjusted comfortably and tightened securely, J All tires are properly inflated. (For shipping purposes, the tires were ovednflated at the factory). Be sure mower deck is properly leveled side-to-side/tront-to-rear for best cutting results. (Tires must be properly inflated for leveling). Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers. v z Check wiring. See that all connections are still secure and wires are properly clamped. CHECK FOR PROPER POSITION OF ALL BELTS See the figures that are shown lot replacing motion and mower blade drive belts in the Service and Adiustments section of this manual. Verify that the belts are routed correctly. CHECK BRAKE SYSTEM After you learn how to operate your tractor, checkto see that the brake is operating properly. See"TO CHECK BRAKE" intheService and Adjustments section of this manual. While learning howto use yourtractor, pay extra attention to the following importantitems: Engine oil is at proper level. J' Fue[tankis filledwithfresh, clean, regular unleaded gasoline. Become familiar with all controls, their location and function. Operate them before you start the engine. J" Besure brake system is insafe operating condition. _ Be sure Operator Presence System and Reverse Operation System (ROS) are working properly (SeetheOperation and Maintenance sections in this manual). 12 These symbols mayappear onyourtractor orinliterature supplied withtheproduct. Learn andunderstand theirmeaning. R N REVERSE L H NEUTRAL HIGH I'-,I LOW CHOKE FAST BLOW IGNITION i,mll ENGINE LIGHTS OFF ON REVERSE OPERATION SYSTEM (ROe) FUEL A'I-t'ACH M ENT CLUTCH DISENGAGED ENGINE BATTERY ON ENGINE REVERSE ATrACHMENT CLUTCH ENGAGED START PARKING I=ORWARD DANGER_ KEEP HANDS AND PEET AWAY BRAKE CRUISE KEEP MOWER AREA CLEAR (BEE SAFETY MOWER LIFT HEIGHT CONTROL SWITCH OLUTCI'ffBRAKE PEDAL SLOPE RULES HAZARDS SEC'_ON) DANGER if not avoided, wZII result indicates in death aorhazard seriouswhich, injury. FREE (Automatic WARNING indicales a hazard which, if not avoided, could result in death or serious injury. WHEEL Models only) CAUTION indicates a hazard which, injury. if not avoided, might result in minor or moderate CAUTION when used without the alert symbol, indicates a situation that could result in damage to the tractor and/or engine. Failure to follow instructions could result in serious injury or death, The safety alert symbol is used to identify safety information about hazards which can result in death, serious injury and!or property damage, HOT SURFACES indicates a hazard which, if not avoided, could result in death, serious injury and/or property damage. FIRE indicates a hazard which, if not avoided, could result in death, serious injury and/or property damage. 13 KNOW YOUR TRACTOR READ THIS MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments, Save this manual for future reference. Our tractors conform to the applicable safety standards of the American National Standards Institute, (G) (A) ATTACHMENT LIFT LEVER - Used to raise and lower the mower or other attachments mounted to your tractor. (B) CLUTCH/BRAKE PEDAL - Used for declutching and braking the tractor and starting the engine. (C) PARKING BRAKE - Locks clutch/brake pedal into the brake position, (D)THROTTLE CONTROLUsed to control engine speed. (E) ATTACHMENT CLUTCH SWITCH Used to engage the mower blades, or other attachments mounted to your tractor, (F) IGNITION SWITCH - Used for starting and stopping the engine. REVERSE OPERATION SYSTEM (ROS) "ON" POSITION - Allows operation of mower or other powered attachment while in reverse, (H) LIGHT SWITCH - Turns the headlights on and off. (J) GEARSHIFT LEVER- Selects the speed and direction of the tractor. (N) CHOKE CONTROLUsed when starting a cold engine. (P) SERVICE REMINDER/HOUR METER - Indicates when service is required for the engine and mower, 14 Theoperation ofanytractor canresult inforeign objects thrown intothe eyes, which canresult insevere eyedamage. Always wearsafety glasses oreyeshields whileoperating yourtractor orperforming anyadjustments orrepairs. Werecommend standard safety glasses orawidevisionsafety mask wornoverspectacles. HOW TO USE YOUR TRACTOR TO SET PARKING BRAKE Your tractor is equipped with an operator presence sensing switch. When engine is running, anyattemptbythe operator to leave theseat without first setting the parking brake will shut off the engine. t. Depress clutch!brake pedal (B) all the way down and hold. 2. Pull parking brake lever (C) up and hold, release pressure from brake pedal (B), then release parking brake lever. Pedal should remain in brake position. Make sure parking brake will holdtractor secure. STOPPING MOWER BLADES • To stop mower blades, move attachment clutch clutch lever to "DISENGAGED" position (r_). (¢_'t) Attachmerlt Clutch Switch "Engaged .... (l_)Attachment Clutch Switch Disengaged" GROUND DRIVE • Tostop ground drive, depress clutch!brake pedal all the way down. , Move gear shift lever (J) to neutral position. ENGINE • Movethrottle control (D) between halfand full speed (fast) position. NOTE: FaituretomovethrottJecontrolbetween half and full speed (fast) position, before stopping, may cause engine to "backfire". • Turn ignition key (F) to "STOP" position and remove key. Always remove keywhen leavingtractorto prevent unauthorized use. • Never use choke (N) to stop engine. IMPORTANT: Leaving the ignition switch in any position other than "STOP" will cause the battery to discharge and go dead. NOTE: Under certain conditions whentractor is standing idle with the engine running, hot engine exhaust gases may cause "browning" of grass. To eliminate this possibility, always step engine when stopping tractor on grass areas. _,CAUTION: Always stop tractor completely,as described above, and set parking brake before leaving the operator's position. TO USE THROTTLE CONTROL (D) Always operate engine at full speed (fast). • Operating engine at less than full speed (fast) reduces engine's operating efficiency. • Full speed (fast) offers the best mower performance. TO USE CHOKE CONTROL (N) Use choke control whenever youare starting a cold engine. Do not use to start a warm engine. • To engage choke contro[, pull knob out. Slowly push knob in to disengage. 15 TO MOVE FORWARD AND BACKWARD The direction and speed of movement is controlled by the gearshift lever (J). 1, Start tractor with clutch/brake pedal depressed and gearshift lever in neutral position. 2. Move gearshift lever to desired position. 3. Slowly release clutch/brake pedal to star_ movement. TO ADJUST GAUGE WHEELS Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions, NOTE: Adjust gauge wheels with tractor on a flat level surface. 1. Adjust mower to desired cutting height (See "TO ADJUST MOWER CUTTING HEIGHT" in this section of manual), 2. With mower indesired height of cut position, gauge wheels should beassembled so they are slightly off the ground. Install gauge wheel in appropriate hole. Tighten securely. 3. Repeat for all, installing gauge wheel in same adjustment hole. IMPORTANT," Bringtractorto acompletestop before shifting orchanging gears. Failureto do so will shorten the useful life ofyour transaxle. TO ADJUST MOWER CUTTING HEIGHT The position of the attachment lift lever (A) determines the cutting height. TO OPERATE MOWER "Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough, rolling terrain or hills. 1. Select desired height of cut with attachment tift lever. 2. Start mower blades by engaging attachment clutch control, TO STOP MOWER BLADES • Put attachment lift lever in desired cutting height slot. • Slide pointer tab (T) to desired cutting height as a reminder for next time you mow. The cutting height range is approximately I to 4", The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed. • The average lawn should be cut to approximately 2-I/2" during the cool season and to over 3" during hot months. For healthier and better looking lawns, mow often and after moderate growth, • For best cutting performance, grass over 6" in heightshould be mowedtwice. Make the first cut relatively high; the second to desired height. Disengage attachment clutch control, _CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield (S) in place. 16 REVERSE OPERATION SYSTEM (ROS) Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel inthe reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position. Ai)AWARNING: Backing up with the attachment clutch engaged while mowing is strongly discouraged. Turningthe ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless absolutely necessary. USING THE REVERSE OPERATION SYSTEM Only use if you are certain no children or other bystanders will enter the mowing area. 1. Depress clutch/brake pedal all the way down and hold. 2. With engine running, turn ignition key counterclockwise to ROS "ON" position. 3. Look down and behind before backing. 4. Move gear shift leverto reverse position and slowly release clutch/brake pedal to start movement. 5. When useofthe ROSis no Iongerneeded, turn the ignition key clockwise to engine "ON" position. ROS "ON* Position Engine "ON" Position (Normal Operating) O TO OPERATE ON HILLS _I=WARNING: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope. Use the slope guide at the back of this manual. • Choose the slowest speed before starting up or down hiils, • Avoid stopping or changing speed on hitts. • If stopping is absolutely necessary, push clutch/brake pedal quicklyto brake position and engage parking brake. • Move gearshift lever to 1st gear, Be sure you have allowed room for tractor to roll slightly as you restart movement. • To restart movement, slowly release parks ing brake and clutch]brake pedal, • Make all turns slowly, 17 TO TRANSPORT • Raise attachment lift lever to its highest position. • When pushing or towing your tractor, be sure gearshift lever is in neutral position. • Do not push or tow tractor at more than five (5) MPH. NOTE: Toprotect hood from damage when transporting your tractor on atruckoratrailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.). TOWING CARTS AND OTHER A'n'ACHMENTS Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your tractor. Use common sense when towing. Too heavy of a load, while ona slope, is dangerous. Tires can lose tractionwith the groundand cause you to lose controlof your tractor. SERVICE REMINDER/HOUR METER Service reminder shows the total number of hours the engine has run and flashes to indicatethat the engine or mower needs servicing. When service is required, the service reminder will flash for two hours. To service engine and mower, see the Maintenance section of this manual. NOTE: Service reminder runs when the ignition key is in any position but "STOP". For acurate reading, be sure key remains in the "STOP" positionwhen engine is not running. BEFORE STARTING THE ENGINE CHECK ENGINE OIL LEVEL The engine inyour tractor has been shipped, from the factory, already filled with summer weight oil. 1. Check engine oil with tractor on level ground. 2. Unthread and remove oil fill cap/dipstick; wipe oil off. Reinsert the dipstick into the tube and rest oil fill cap on the tube. Do notthread the cap onto the tube. Remove and read oil level. If necessary, add oil until "FUL!/' mark on dipstick is reached. Do not overfill. * For cold weather operation you should change oil for easier starting (See the oil viscosity chart inthe Maintenance section of this manual). - Tochange engine oil, seethe Maintenance section in this manual. ADD GASOLINE • Fill fuel tank to bottom of filler neck. Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness. _,CAUTION: Wipe offany spilled oil or fuel. Do not store, spill or use gasoline near an open flame. IMPORTANT: When operating in temperatures below 32°F(0°C), use fresh, clean winter grade gasoline to help ensure good cold weather starting. CAUTION: Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation ofacids during storage. Acidic gas can damage the fuelsystem of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Usefresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fueltank or permanent damage may occur. RESERVE FUEL VALVE OPERATION 1. Raise seat to access reserve fuel valve, 2. In normal operation, valve should be set to primary (as shown in view) 3. If tractor runs out of fuel, rotate valve handle to reserve. 4. Drive tractor to be refueled. 5. After refueling, return valve to primary position. Primary 18 TO START ENGINE When starting the engine for the first time or if the engine has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine. 1. Sitonseatin operating position, depress clutch/brake pedal and set parking brake. 2. Place gear shift lever in neutral position. 3. Move attachment clutch to disengaged position. 4, Move throttle control to fast position 5. Pullchokecontrolout foracoldenginestart attempt, Fora warm engine start attempt the choke control may not be needed, NOTE: Before starting, read the warm and cold starting procedures below. 6. Insert key into ignition and turn key clockwise to start position and release key as soon as engine starts. Do not run starter continuously for more than fifteen seconds per minute. If the engine does not start after several attempts, push choke control in, wait a few minutes and try again, Ifengine still does notstart, pull the choke control out and retry. 'WARM WEATHER STARTING (50°F/10°C and above) 7. When engine starts, slowly push choke control in until the engine begins to run smoothly, If the engine starts to run roughly, pulIthe choke control out slightly for a few seconds and then continue to push the control in slowly, • The attachments and ground drive can now be used. Ifthe engine does not accept the load, restart the engine and allow it to warm up for one minute using the choke as described above. COLD WEATHER STARTING (50°F/10°C and below) 7. When engine starts, slowly push choke control in until the engine begins to run smoothly. Continue to push the choke control in small steps allowing the engine to accept small changes in speed and load, until the choke control is fully in. If the engine starts to run roughly, pull the choke control out slightly for a few seconds and then continue to push the control in slowly. This may require an engine warm-up period from several seconds to several minutes, depending on the temperature. • The attachments can be used during the engine warm-up period and may require the choke control be pulled out slightly. NOTE: If at a high altitude (above 3000 feet) or in cold temperatures (below 32°F/0°C) the carburetor fuel mixture may need to be adjusted for best engine performance. See "TO ADJUST CARBURETOR" inthe Service and Adjustments section of this manual. MOWING TIPS • Tire chains cannot be used when the mower housing is attached to tractor. • Mower should be properly leveled for best mowing performance. See "TO LEVEL MOWER HOUSING" in the Service and Adjustments section of this manual, • The left hand side of mower should be used for trimming. • Drive so that clippings are discharged onto the area that has already been cut. Havethe cut areatothe right of the tractor. This will result in a more even distribution of clippings and more uniform cutting, • When mowinglarge areas, start byturning to the right so that clippings will discharge away from shrubs, fences, driveways, etc. After one ortwo rounds, mow inthe opposite direction making left hand turns until finished. ,,€ J , If grass is extremely tall, it should be mowed twice to reduce load and possible fire hazard from dried clippings. Make first cut relatively high; the second to the desired height. • Do not mow grass when it is wet. Wet grass will plug mower and leave undesirable clumps. Allow grass to dry before mowing. • Always operate engine at full throttle 'when mowing to assure better mowing performance and proper discharge of material. Regulate ground speed by selecting a low enough speed to give the mower cutting performance as well as the quality of cut desired. • When operating attachments, select a ground speed that will suit the terrain and give best performance of the attachment being used. 19 MA'I"NTENANCE SCHEDULE Cheek T R Brake CheckTire Operation Pressure Cheek,Operator Presence A Check Fasteners C Cheek!Replace iT for Loos_ Lubrication Mower R Clean Battery and Glean Debris 0f!, Steering Check Transa×_e Check Mower Check V_BeltS Check Enqine Air G Cleat_ Air N_ Ir, s_eet Replace E clean v" ,I v, v' ..... ...... v' EVERY 100 HOURa EVERY SEASON BEFORe STORAGE ...... v' J_ v' _" .... ' v' v" Terminals CeoI!ng Plale ,, V_s v" ..... Levelness Oil Level En_qi_e Oil Clean v" E_RY ROURB Level Engine _ EVERY 25 HOBRB ..... Battery Change Systems , ,, Chart Cheek v' .... (with oil Oil (without it" i, v',i '¸ filter) V" v% oit filter I Fil_e,[ v' ,, Screen v" Muffler/Spark Arraster Oil Filter (if equipped) Engine Cooling Rep,!ace Spark Replace Air Filter Replace & ROB EVERY B HOURS Blades 0 Change BEFORE EACH USE Plug, Paper VP_ Fins ........ v' . it" Cartridge FL_eI Fi|ter GENERAL RECOMMENDATIONS The warranty on this tractor does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain tractor as instructed in this manual. Some adjustments will need to be made periodically to properly maintain your tractor. At least once a season, check to see if you should make any of the adjustments described in the Service and Adjustments section of this manual • At least once a year you should replace the spark plug, clean or replace air filter, and check blades and belts for wear. A new spark plug and clean air filter assure proper air-fuel mixture and help your engine run better and last longer. BEFORE EACH USE 1. Check engine oil level. 2. Check brake operation. 3. Check tire pressure. 4. Check operator presence and ROS systems for proper operation. 5. Check for loose fasteners. LUBRICATION CHART (_Steering OSpindle Zerk Pivot Bolts --___@Spindle __,_._.[ (_Fro.nt-f Wheel Zerk L_Ji _. ,._ fL:_OFrontWheei _:t _-_ "_>.. Bearing Zerk Zerk ,_ __._"_'_E (_ Steering _-,,.y "-1 I-- _._-'_ Sector r_ _ Oe , it I.... Teeth If I [ _ ._-_" J ngine (2_Mandrel Zorks [-"(_ Pivots OGeneral Purpose Grease (_)Referto Maintenance"ENGINE" Section. IMPORTANT: Do not oil or grease the pivot points which have special nylon bearings. Viscous lubricants will attract dust and dirt that will shorten the life of the self-lubricating bearings. Ifyou feelthey must be lubricated, use only a dry, powdered graphite type lubricant sparingly. 2O i TRACTOR Always observe safety rules when performing any maintenance. BRAKE OPERATION If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced. (See "TO CHECK BRAKE" in the Service and Adjustments section of this manual). TIRES • Maintain proper air pressure in all tires (See PSI on tires). , Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber. • Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage. NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion. OPERATOR PRESENCE SYSTEM AND REVERSE OPERATION SYSTEM (ROS) Be sure operator presence and reverse operationsystems are working properly. If yourtractor does notfunction as described, repair the problem immediately. • The engine should not start unless the brake pedal is fully depressed, and the attachment clutch control is in the disengaged position. CHECK OPERATOR PRESENCE SYSTEM - When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine. • When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine. - The attachment clutch should never operate unless the operator is in the seat. ROS "ON" Position Engine "ON" Position (Normal Operating) 21 CHECK REVERSE OPERATION (ROS) SYSTEM ° When the engine is running with theignition switch inthe engine "ON" position andthe attachment clutch engaged, any attempt by the operator to shift intoreverse should shut off the engine. • When the engine isrunning with the ignition switch in the ROS "ON" position and the attachment clutch engaged, any attempt by the operator to shift into reverse should NOT shut off the engine. BLADE CARE For best results mower blades must be sharp. Replace worn, bent or damaged blades. A CAUTION: Use only a replacement blade approved by the manufacturer of your tractor. Using a blade not approved by the manufacturer of your tractor is hazardous, could damage your tractor and void your warranty. BLADE REMOVAL 1. Raise mower to highest positionto allow access to blades, NOTE: Protect your hands with gloves and/ or wrap blade with heavy cloth. 2. Remove blade bolt by turning counterclockwise. 3. Installnew bladewith stamped"THIS S1DE UP" facing deck and mandrel assembly, IMPORTANT: To ensure proper assembly, center hole in blade must align with star on mandrel assembly. 4. Install and tighten blade bolt securely (45-55 Ft. Lbs./62-75 Nm torque). IMPORTANT: Special blade bolt is heat treated. Blade Assembly BA'I-rERY Your tractor has a battery charging system which is sufficient for normal use. However, periodic charging of the battery with an automotive charger wi[I extend its life. • Keep battery and terminals clean. • Keep battery bolts tight. • Keep small vent holes open. • Recharge at 6-10 amperes for I hour. NOTE: The original equipment battery on your tractor is maintenance free. Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary, TOCLEAN BATTERY ANDTERMINALSTO CHANGE ENGINE OIL Corrosion anddirtonthebattery andtermi- Determine temperature range expected before oil change, All oil must meet API nalscancause thebattery to"leak" power.service classification SG-SL 1. Remove terminal guard. 2. Disconnect BLACK battery cablefirst • Be sure tractor is on level surface. will drain more freely when warm, thenREDbatterycableandremove•• Oil Catch oil in a suitable container. battery fromtractor. 3, Rinsethe battery withplain water anddry, t. Remove oil fill cap/dipstick, Be careful 4. Clean terminals andbattery cable ends not to allow dirt to enter the engine when changing oil. withwirebrush untilbright. yellow cap from end of drain 5, Coat terminals withgrease orpetroleum2, Remove valve and install the drain tube onto the jelly. fitting. 6. Reinstall battery(See"REPLACING BATTERY" intheSERVICE ANDAD- 3, Unlock drain valve by pushing inward JUSTMENTS section ofthismanual). slightly and turning counterc!ockwise. TRANSAXLE MAINTENANCE Keep transaxle free from build-up of dirt and chaff which can restrict cooling. Do not attempt to clean transaxle while engine is running or while the transaxle is hot. To prevent possible damage to seals, do not use high pressure water or steam to clean transaxte, V-BELTS Check V-belts for deterioration and wear after 100 hours of operation and replace if necessaP/. The belts are not adjustable, Replace belts if they begin to slip from wear, ENGINE LUBRICATION Only use high quality detergent oil rated with API service classification SG-SL Selectthe oil's SAE viscosity grade according to your expected operating temperature. Changethe oil after every 50 hours of operation or at least once a year if the tractor is not used for 50 hours in one year. Check the crankcase oil level before starting the engine and after each eight (8) hours of operation. 22 Oil DrainValve CI?dSed ___'_ _ Drain Locked F Tube __ YellowCap-"'__ 4, To open, pull out on the drain valve. 5. Afteroil has drained completely, close and lock the drain valve by pushing inward and turning clockwise until the pin is in the locked position as shown. 6. Remove the drain tube and replace the cap onto the end of the drain valve. 7. Refill engine with oilthrough oil fill dipstick tube, Pour slowly. Do not overfill. For approximate capacity see "PRODUCT SPECIFICATIONS"section ofthis manual. 8. Use gauge on oil fill cap!dipstick for checking level. Insert dipstick into the tube and rest the oil fill cap on the tube, Do notthread the cap ontothe tube when taking reading, Keep oil at "FULl:' line on dipstick. Tighten cap onto the tube securely when finished. ENGINE OIL FILTER Replace the engine oil filter every season or every other oil change if the tractor is used more than 100 hours in one year. CLEAN AIR INTAKE/COOLING AREAS Toensure proper cooling, make surethe grass screen, cooling fins, and other external surfaces ofthe engine are kept cleanat alltimes. Every 100 hours of operation (more often under extremely dusty, dirty conditions), removethe blower housing and othercooting shrouds. Clean the cooling fins and external surfaces as necessary. Makesurethe cooling shrouds are reinstalled. AIR FILTER Your engine will not run properly using a dirty air filter. Service paper cartridge every two months or every 25 hours of operation, whichever occurs first. Service paper cartridge more often under dusty conditions. Replace the papercartridge annually, or after every 100 hours of operation, TO SERVICE CARTRIDGE • Replace a dirty, bent, or damaged cartridge. Handle new cartridge carefully; do not use if the rubber sea! is damaged. NOTE: Do not wash the paper cartridge or use pressurized air, as this will damage the cartridge. 1. Open door (A) on the blower housing to access the air cleaner element (B), 2. Unhook the latch (C) and remove the element. 3. Gently tap the paper element to dislodge dirt. NOTE: Operating the engine with a blocked grass screen, dirty or plugged coolingfins, and/or cooling shrouds removed will cause engine damage due to overheating. MUFFLER Inspect and replace corroded muffler and spark arrestor (if equipped) as itcould create a fire hazard and/or damage. SPARK PLUG(S) Replace spark plug(s) at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in "PRODUCT SPECIFICATIONS" section of this manual, IN-LINE FUEL FILTER The fuel filter should be replaced once each season, If fuel filter becomes clogged, obstructing fuelflowto carburetor, replacement is required. 1. With engine cool, remove filter and plug fuel line sections. 2. Place newfuelfilter in positioninfuel line with arrow pointingtowards carburetor. 3. Be sure there are no fuel line leaks and clamps are properly positioned. 4, Immediately wipe up any spilled gasoline. 4. Clean all air cleaner components of any accumulated dirt or foreign material, Prevent any dirt from entering the throat of carburetor. 5. Install cleaned or new element on the base and secure with latch. 6. Close and latch the door. FuelFilter __ CLEAN AIR SCREEN Air screen must be kept free of dirt and chaff to preventengine damagefrom overheating. Clean with a wire brush or compressed airto remove dirt and stubborn dried gum fibers. 23 CLEANING • Clean engine, battery, seat, finish, etc. of all foreign matter. • Clean debris from steering plate. Debris can restrict clutch/brake pedal shaft movement, causing belt slip and loss of drive. 4, Pull back the lock collar of the nozzle adapter and push the adapter onto the deck washout port at the leftend of the mower deck. Release the lock co]Iar to lock the adapter on the nozzle. Nozzle _, CAUTION: Avoid all pinch points and movable parts Washout Port Clutch/brake pedal Clean top side Steering IMPORTANT: tion is secure. Steering System, Dash, Fender and Mower l'_otShown CAUTION: _t, Pinch _ Points Keep finished surfaces and wheels free of all gasoline, oil, etc. • Protect painted surfaces with automotive type wax. We do not recommend using a garden hose or pressure washer to clean your tractor unless the engine and transmission are covered to keep water out. Water in engine or transmission will shorten the useful life of your tractor. Use compressed air or a leaf blower to remove grass, leaves and trash from tractor and mower. connec- 5. Turn the water on. 6. While sitting in the operator's position on the tractor, re-start the engine and place the throttle lever in the Fast ",_y" position. • IMPORTANT: Recheck the area making certain the area is clear. 7. Move the tractor's attachment clutch control to the "ENGAGED" position. Remain in the operator's position with the cutting deck engaged until the deck is cleaned. 8. DECK WASHOUT PORT Your tractor's deck is equipped with a washout port on its surface as part of its deck wash system. It should be utilized after each use. 1. Drive the tractor to a level, clear spot on your Iawn, near enough to a water spigot for your garden hose to reach. IMPORTANT: Make certain the tractor's discharge chute is directed AWAY from your house, garage, parked cars, etc. Remove bagger chute or mulch cover if attached. 2. Make sure the attachment clutch control is in the "DISENGAGED" position, set the parking brake, and stop the engine. 3. Thread the nozzle adapter (packaged with your tractor's Operator's Manual) onto the end of your garden hose. Tug hose ensuring Move the tractor's attachment clutch control to the "DISENGAGED" position. Turn the ignition key to the STOP position to turn the tractor's engine off. Turn the water off. 9. Pull back the tock collar of the nozzle adapter to disconnect the adapter from the nozzle washout port. 10. Move the tractor to a dry area, preferably a concrete or paved area. Place the attachment clutch control in the "ENGAGED" position to remove excess water and to help dry before putting the tractor away. _kWARNING: A broken or missing washout fitting could expose you or others to thrown objects from contact with the blade. • Replace broken or missing washoutfitting immediately, prior to using mower again, . Plug any holes in mower with bolts and Iocknuts. 24 ¸ WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: 1. Depress clutch!brake pedal fully and set parking brake. 2. Place gearshift lever in neutral position. 3. Place attachment clutch in "DISENGAGED" position. 4. Turn ignition key to "STOP" and remove key, 5. Make sure the blades and all moving parts have completely stopped. 6. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. TO REMOVE MOWER 1. Place attachment clutch in "DISENGAGED" position. 2. Lower attachment lift lever to its lowest position. 3. Disengage belttension rod (K) from lock bracket (L). CAUTION: Belt tension rod is spring loaded. Have atight grip on rod and release slowly. 4, Remove mower belt from electric clutch pulley (M). 5. Disconnect front link (E) from mower remove retainer spring and washer, 6. Go to either side of mower and disconnect mower suspension arm (A) from chassis and rear lift link (C) from rear mower bracket (D) - remove retainer springs and washers. 7. Go to other side of mower and disconnect the suspension arm and rear lift link, 25 CAUTION: After rear lift links are disconnected, the attachment lift leverwitl be spring loaded. Have a tight grip on lift lever when changing position of the lever. 8. From right side of mower, disconnect anti-sway bar (S) from right rear mower bracket (D) - remove retainer spring and washer and pull mower toward you until the bar falls from the hole in bracket. 9. Turn tractor steering wheel to the left as far as it will go. 10. Slide mower out from under right side of tractor. TO INSTALL MOWER Follow procedure described in "INSTALL MOWER AND DRIVE BELT" intheAssembly section of this manual. TO LEVEL MOWER Make sure tires are properly inflated to the PSI shown on tires, lftires are overor under inflated, it may affect the appearance ofyour lawn and lead you to think the mower is not adjusted properly. VISUAL SIDE-TO-SIDE ADJUSTMENT 1. With all tires properly inflated and if your lawn appears unevenly cut, determine which side of mower is cutting lower, NOTE: As desired, you can raise the low side of mower or lower the high side. 2. Go to side of mower you wish to adjust. 3. With a 3/4" or adjustable wrench, turn lift link adjustment nut (A) to the left to lower the mower, or, to the right to raise the mower. 4. If adjustment is necessary, see steps 2 and 3 in Visual Adjustment instructions above. 5. Recheck measurements, adjustifnecessan/until both sides are equal, FRONT-TO-BACK ADJUSTMENT IMPORTANT: Deck must be level sideto-side. Toobtain the best cutting results, the mower blades should be adjusted so the front tip is 1/8" to 1/2" lower than the rear tip when the mower is in its highest position. CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth. • Raise mower to highest position. • Position any blade so the tip is pointing straight forward. Measure distance (B) to the ground atfront and reartip ofthe blade. o_ Turn nut right to raise mower • If front tip of blade is not 1/8" to 1/2" lower than the rear tip, go to the front oftractor. - With an 11/16" or adjustable wrench, loosen jam nut A several turns to clear adjustment nut B, • With a 3/4" or adjustable wrench, turn front link adjustment nut (B) clockwise (Itighten) to raise the front of mower, or, counterclockwise (loosen) to lower the front mower, Turn nut left lower mower NOTE: Each full turn of adjustment nut will change mower height about 3/16". 4. Test your adjustment by mowing some uncut grass and visually checking the appearance. Readjust, if necessary, until you are satisfied with the results, PRECISION SIDE-TO-SIDE ea ADJUSTMENT 1. With alltires properly inflated, parktractor on level ground or driveway. _, CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth. 2. Raise mower to its highest position, 3. At both sides of mower, position blade at side and measure the distance (A) from bottom edge of blade to the ground. The distance should be the same on both sides. Tightenadjust nut Bto raisemower Loosenadjust nut B to lower mower f Loosenjam nut A first NOTE: Each full turn of the adjustment nut will change mower height about 1/8". o Recheck measurements, adjust if necessary until front tip of blade is 1/8" to 1/2" lower than the rear tip. • Hold adjustment nut in positionwith wrench and tighten jam nut securely against adjustment nut. lA 26 TO REPLACE MOWER DRIVE BELT MOWER DRIVE BELT REMOVAL 1. Park tractor on a level surface. Engage parking brake. 2. Lower attachment lift ]ever to its lowest position. 3. Disengage belttension rod (K)from lock bCAracket (L). UTION: Belttension rod isspring loaded. Have afirm grip on rod and release slowly. 4. Remove screws (P) from R.H. and L.H. mandrel covers and remove covers (Q). Remove any dirt or grass clippings which may have accumulated around mandrels and entire upper deck surface. Remove belt from electric clutch pulley (M). both mandrel pulleys (R) and all idler pulleys (S). MOWER DRIVE BELT INSTALLATION 1. Install belt around both mandrel pulleys (R) and around idler pulleys (S) asshown. 2. Install beltonto electric clutch pulley (M). IMPORTANT: Check belt for proper routing in all mower pulley grooves. 3. Reassemble R.H. and L.H. mandrel covers (Q). Securely tighten all screws. 4. Engage belt tension rod (K) on locking bracket (L). & CAUTION: Belt tension rod is spring loaded. Havea tight grip on rod andengage slowly. 5. Raise attachment lift lever to highest position. TO REPLACE MOTION DRIVE BELT Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installationguide decal on bottom side of left footrest. 27 BELT REMOVAL1. Remove mower (See "TO REMOVE MOWER" in this section of manual). NOTE: Observe entire motion drive belt and position of all belt guides and keepers. 2. Disconnect clutch wire harness (A). 3. Remove anti-rotation link (53)on right side of tractor. 4. Remove belt from stationary idler (C) and clutching idler (D). 5. Pull belt slack toward rear of tractor. Remove belt upwards from transaxte input pulley (F). 6. Remove belt downward from engine pulley and around electric clutch (G). 7. Slide belt toward rear of tractor, off the steering plate (H) and removefromtractor. BELT INSTALLATION 1. Install new belt from tractor rear to front, over the steering plate (H) and above clutch brake pedal shaft (J). 2. Pull belt toward front of tractor and roll belt around electdc clutch and onto engine pulley (G). 3. Pull belt toward rear of tractor. Carefully work belt down around transaxle input pulley (F). Be sure belt is inside the belt keeper. 4. Install belt through stationary idler (C) and clutching idler (D). 5. Reinstall anti-rotation link (B) on right side of tractor. Tighten securely. 6. Reconnect clutch harness (A). 7. Make sure belt is in all pulley grooves and inside all belt guides and keepers. 8. Install mower (See "TO INSTALL MOWER" in thissection of manual). TRANSAXLE GEAR SHIFT LEVER NEUTRAL ADJUSTMENT The transaxle should be in neutral when the gear shift lever is in neutral (N) (lock gate) position. The adjustment is preset at the factory; however, if adjustment is needed, proceed as follows: 1. Make sure transaxle is in neutral (N). NOTE: When the tractor rear wheels move freely, the transax[e is in neutral, 2. Loosen adjustment bolt in front of the right rear wheel. 3. Position the gearshift lever inthe neutral (N) position. 4. Tighten adjustment bolt securely. NOTE: If additional clearance is needed to get to adjustment bolt, move mower deck height to the lowest position. Gearshift TO REMOVE You may also check brake by: 1, Parktractoron alevel, dryconcreteorpaved surface, depress clutch!brake pedal all the way down and engage parking brake, 2. Place gear shift lever in neutral position. The rear wheels must lock and skid when you try to manually push the tractor fonNard. If the rear wheels rotate, then the brake needs to be serviced, Contact a Sears or other qualified service center. TO START ENGINE TERY WITH A WEAK BAT- Ifyou r battery is too weak to startthe engine, it should be recharged, (See"BATTERY" inthe MAINTENANCE section of this manual). tf "jumper cables" are used for emergency starting, follow this procedure: IMPORTANT: Your tractor is equipped with a 12 volt system. The other vehicle must also be a 12 volt system, Do not use your tractor battery to start other vehicles. FOR REPAIRS 1. 2. Block up axle securely. Remove axle cover, retaining ring and washers to allow wheel removal (rear wheels have a square key- Do not lose), 3. Repair tire and reassemble, NOTE: On rearwheels only: align grooves in rear wheet hub and axle. Insert square key. 4. Replace washers and snap retaining ring securely in axle groove. 5. Replace axle cover. NOTE: To seal tire punctures and prevent flat tires due to slow leaks, purchase and use tire sealant from Sears. Tire sealant also prevents tire dry rot and corrosion, TQ ATTACH JUMPER CABLES 1. Connect one end of the RED cable to the POSITIVE (+) terminal of each battery(AB), taking care notto short against tractor chassis. 2, Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery, 3. Connect the other end of the BLACK cable (D) to good chassis ground, from fuel tank and battery. TO REMOVE ORDER Washers CABLES, _, v Weak or Dead Battery 28 away REVERSE 1, BLACKcabtefirstfromchassisandthen from the fully charged battery. 2. RED cable last from both batteries. Retaining Axle Square Key (Rear Wheel Only) BRAKE If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced. _WARNING: Lead-acid batteries generate explosive gases, Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries. Adjustment Bolt WHEEL TO CHECK Fully Charged Battery REPLACING BATTERY TO REPLACE HEADLIGHT BULB 1. Raise hood. 2. Remove bulb holder fromthe hole in the backside of the grill. 3. Replace bulb in holder and install bulb holder securely back into the hole in the backside of the grill, 4, Close hood. n_as_ARNING: Do not short battery termly allowing awrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc. Positive terminal must be connected first to prevent sparking from accidentatgrounding. TO REMOVE HOOD & GRtLLASSEMBLY 1. Raise hood. 2. Unsnap headlight wire connector, 3. Stand in front of tractor. Grasp hood at sides, tilt toward engine and lift off of tractor. 4. When replacing hood, be sure to reconnect the headlight wire connector, 1. Lift hood to raised position. 2. Remove terminal cover. 3. Disconnect BLACK battery cable then RED battery cable and carefully remove battery from tractor. 4. Install new batterywith terminals in same position as old battery. 5. Reinstall terminal cover. 6. First connect RED battery cable to positive (+) battery terminal with bolt and nut as shown. Tighten securely. 7. Connect BLACK grounding cable to negative (-) battery terminalwith remaining bolt and nut. Tighten securely 8. Close hood. .o0 ,ivo __ (Black) ,__ Terminal CabIe _,,L L_ .__'_ Cover . Positive _.-'_ (Red)/ "_,"_._._._ "_. _ /1 FRONT WHEEL TOE-IN/CAMBER Your new tractorfront wheel toe-in and camber is set at the factory and is normal. The front wheel toe-in and camber are not adjustable. If damage has occurred to affect the factory set front wheeltoe-in or camber, contact a Sears or other qualified service center. INTERLOCKS AND RELAYS Loose or damaged wiring may cause your tractor to run poorly, stop running, or prevent it from starting. • Check wiring. TO REPLACE FUSE Replace with 30 amp automotive-type plugin fuse. The fuse holder is located behind the dash. ENGINE TO ADJUST THROTTLE CONTROL CABLE The throttle control has been preset at the factor] and adjustment should not be necessary Check adjustment as described below before loosening cable. If adjustment is necessary, see engine manual. TO ADJUST CHOKE CONTROL The choke control has been preset at the factory and adjustment should not be necessary. If adjustment is necessary, see engine manual. TO ADJUST CARBURETOR Your carburetor has been preset atthefactory and adjustment should not be necessary. However, minor adjustment may be required to compensate for differences in fuel, temperature, altitude or load. ffthe engine does need adjustment, see engine manual. 29 Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more. _JL,WARNING: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure. TRACTOR Remove mower from tractor for winter storage. When mower is to be stored fora period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store inaclean, dry area, t. Clean entiretractor (See"CLEANING" in the Maintenance section of this manual), 2, Inspect and replace belts, if necessary (See belt replacement instructions inthe Service and Adjustments section of this manual). 3. Lubricate as shown in the Maintenance section of this manual. 4. Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary. 5. Touch up all rusted or chipped paint surfaces; sand lightly before painting. BATTERY - Fully charge the battery for storage. - After a period of time in storage, battery may require recharging, • To help prevent corrosion and power leakage during long periods of storage, battery cables should be disconnected and battery cleaned thoroughly (see "TO CLEAN BATTERY AND TERMINALS" in the Maintenance section of this manual). • After cleaning, leave cabJesdisconnected and place cabl es wheretheycannot come in contact with battery terminals. • If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces. 3O ENGINE FUEL SYSTEM IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel hose, or tankduring storage. Also, alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage, Acidic gas can damage the fuel system of an engine while in storage. • Empty the fuel tank by starting the engine and letting it run until the fuel lines and carburetor are empty. • Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur. • Use fresh fuel next season. NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container, Always followthe mix ratio found on stabilizer container. Run engine at least I0 minutes afteradding stabilizerto allowthe stabilizer to reach the carburetor. Do not empty the gas tank and carburetor ff using fuel stabilizer. ENGINE OIL Drain oil (with engine warm) and replace with clean engine oil. (See "ENGINE" inthe Maintenance section of this manual), CYLINDER(S) I. Remove spark plug(s). 2, Pour one ounce of oil through spark plug hole(s) into cylinder(s). 3. Turn ignition key to "START" position for a few seconds to distribute oil. 4. Replace with new spark plug(s). OTHER . Do notstore gasoline from one season to another. • Replace your gasoline can ifyour can starts to rust, Rust and/or dirt in your gasoline will cause problems. • If possible, store your tractor indoors and cover itto give protectionfrom dustand dirt, . Cover your tractor with a suitabie protective cover that does not retain moisture. Do not use plastic. Plasticcannot breathe which allows condensation toform andwill cause your tractor to rust, IMPORTANT: Never cover tractor while engine and exhaust areas are still warm. TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center PROBLEM CAUSE Will not start CORRECTION iI Filifueltankl ,2 See "TO START ENGINE" in Operation section, Engine flooded. I3 Wait several minutes before attempting to start. 1 OutoffueL 2 Engine not "CHOKED" 4 properly. Bad spark plug. 4 Replace spark plug. 5 Dirty air filter. 5 Clean!replace 6 Dirty fuel filter. 6 Replace fuel filter. 7 Water in fuel, 7 Empty fuel tank and carburetor, refill tank with fresh gasoline and replace fue! filter, 8 Loose or damaged wiring. 8 Check all widng, Carburetor out of adjustment, 9 See "To Adjust Carburetor" in Service and Adjustments section. 10 Contact a Sears or other qualified ig 10 Engine valves out of adjustment. SOP#ICe Hard tost.rt Dirty air filter, 1 Cleanlreplace 2 Bad spark plug, 2 Replace spark plug. 3 Weak or dead battery. 3 Recharge or replace battery, 4 Dirty fuel filter, 4 Replace fuel filter, 5 Stale or dirty fuel. 5 Empty fuel tank and refill tank wit_ fresh, clean gasoline. 6 Loose or damaged wiring, 6 Check all widn9, 7 Carburetor 7 See "To Adjust Carburetor" in Service and Adjustments section, 8 will not turn over Engine clicks but will not start center. 1 _ Engine air filter. out of adjustment, Engine valves out of adjustment, _ 8 _ air filter. Contact a Sears or other qualified service center. _ , 1 ClutchJbrake pedal not depressed. 1 Depress 2 Attachment 2 Disengage 3 Weak or dead battery. 3 Recharge 4 Blown fuse. 4 Replace fuse, 5 Corroded battery terminals. 5 Clean battery terminals. clutch is engaged, clutchlbrake pedal. attachment clutch. or replace battery, 6 Loose or damaged wiring, 6 ! Check all wiring. 7 Faulty ignition switch. 7 Check/replace ignition switch. 8 Faulty solenoid or starter. 8 Check/replace solenoid or starter. 9 Faulty operator presence swftch(es). 9 Contact a Sears or other qualified service center. 1 Weak or dead battery, 1 Recharge or replace battery. 2 Corroded battery terminals. 2 Clean battery terminals, 3 Loose or damaged wiring, 3 Check all wiring. 4 Faulty solenoid or starter. 4 Check/replace 31 ,,,,,, .................. solenoid or starter. TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center PROBLEM CAUSE Cutting too much grass/too 2 Throttle in "CHOKE" 3 4 Dirty air filter, 5 Low oil level/dirty oil. 6 Faulty spark plug, 6 Clean and regap or change spark plug. 7 Dirty fuel filter. 7 Replace fuel filter, 8 Stale or dirty fuel. 8 Empty fuel tank and refill tank wit;" fresh, clean gasoline. 9 Water in fuel. 9 i Empty fuel tank and carburetor, refill tank with fresh gasoline and replace fuel filter. Loss of power vibration fast. 1 Raise cutting height/reduce speed. position. 2 Adjust throttle control, Build-up of grass, leaves and trash under mower, 3 Clean underside of mower housing, 4 Clean]replace i5 air filter. Check oil level/change oil. 10 Spark plug wire loose. 10 Connect and tighten spark plug wire. 11 Dirty engine air screen/fins. 11 Clean engine air screen/fins, Dirty/clogged 12 Clean/replace 12 Excessive CORRECTION 1 muffler. muffler, 113 Loose or damaged wiring. 13 Check all wiring, 14 Carburetor 14 See "To Adjust Carburetor" in Service and Adjustments section. 15 Engine valves out of adjustment. 15 Contact a Sears or other qualified service center. out of adjustment. f Worn. bent or loose blade, 1 Replace blade. Tighten blade bolt, 2 Bent blade mandrel, 2 Contact a Sears or other qualified service center. Loose!damaged 3 Tighten loose part(s), Replace damaged parts, 1 Check wiring, switches and connections. If not corrected, contact a Sears or other qualified service center. part(s). Engine continues to 1 run when operator eaves seat with attachment clutch engaged Faultyoperator-safety presence control system. Poor cut - uneven 1 Worn, bent or loose blade, 1 Replace blade. Tighten blade bolt i cutting 2 Mower deck not level. 2 Level mower deck. Buildup of grass, leaves, and trash under mower. 3 Clean underside housing. Bent blade mandrel. 4 Contact a Sears or other qualified service center. Clogged mower deck vent from build-up of grass, leaves, and trash around mandrels. 5 Clean around mandrels to open vent holes. 32 of mower ii TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center CORRECTION CAUSE Mower blades will not rotate Poor grass discharge Headlight(s) not 1 Remove obstruction, 2 Replace mower drive belt. 3 Replace idler pulley, Frozen blade mandrel. 4 Contact a Sears or other qualified service center, Engine speed too slow, 1 Place throttle control in "FAST" position, 2 Travel speed too fast. 2 Shift to slower speed. 3 Wet grass. 3 Allow grass to dry before mow(ng, 4 Mower deck not level. 4 Level mower 5 Low/uneven 5 Check tires for proper PSI, 6 Worn, bent or loose blade, 6 Replace/sharpen blade bolt. 7 Buildup of grass, leaves and trash under mower. 7 Clean underside housing, 8 Mower drive beltworn, 8 Replace mower drive belt, 9 1 Obstruction in clutch mechanism. 2 Worn!damaged 3 Frozen idler pulley. 4 1 mower drive belt tire air pressure, b]ade. Tighten of mower Bfades improperly installed, 9 Re!nstalI blades sharp edge down, 10 improper 10 Replace with blades listed in this manual. 11 11 Clogged mower deck vent holes from buildup of grass, leaves, and' trash around mandrels. 1 blades used. Light switch is "OFF". working (if so equipped) deck. Clean around mandrelsto open vent holes. 1 Turn light switch "ON", 2 Replace bulb(s) or lamp(s), 2 Bulb(s) or lamp(s) burned out, 3 Faulty light switch. 3 Check!replace 4 Loose or damaged wiring. 4 Check wiring and connections. 5 Blown fuse, 5 Replace fuse, Battery will not 1 Bad 1 Replace battery. charge 2 Poor cable connections, 2 Check!clean 3 Faulty regulator 3 Replace regulator, 4 Faulty alternator. 4 Replace alternator. 1 Debris on steedng plate (if equipped). 1 See "CLEANING" in the maintenance section, 2 Motion drive belt worn, damaged, or broken. 2 Replace motion drive belt, 3 Axle key missing. 3 Install axle key at rear wheel, See "TO REMOVE WHEEL" in the Service and Adjustments section. Loss of drive batteryce|l(s). (if so equipped). 33 light switch, all connections. TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center PROBLEM !CAUS E when turning engine "OFF" Engine dies when tractor is shifted into reverse 1 CORRECTION Engine throttte control not se! 1 between half and full speed (fast) position before stopping engine, Move throttle control between half and full speed (fast) position before stopping engine. Reverse operation system (ROS) is not "ON" while mower or other attachment is engaged. Turn ignition key to ROS "ON" position, See Operation section. 1 NEED MORE HELP? .i YOu'll find the answer and more on managemyhome.cem i " Find this and all your • Get answers i other from our team • Get a personalized product manuals online. of home experts. maintenance plan for your home. i " Find information and tools to he|p with home projects. i mana i e - for free! _i_! home brought to you by $ear_ _: 34 SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL 15 DEGREES MAX. down the face of slopes, never across the face. Do not mow WARNING: To avoid serious injury, operate your tractor up and slopes greater than 15 degrees. Make turns gradually to prevent tipping or loss of control. Exercise extreme caution when changing direction on slopes. 1. Fold this page along dotted line indicated above. 2. Hold page before you so that its left edge is vertically parallel to a tree trunk or other upright structure. 3. Sight across the fold in the direction of hill slope you want to measure. 4. Compare the angle of the fold with the slope of the hill. LO 03 Garant_a .......................................................... Rag[as de Seguridad ...................................... Especificaciones deI Producto ........................ MontajeiPre Operacibn ................................... Operacibn ....................................................... Mantenimiento ................................................ 36 37 40 41 47 54 Prograrna de Mantenimiento .......................... 54 Servicio y Ajustes ........................................... 59 Almacenamiento ............................................. 64 tdentificaci6n de Problemas ........................... 65 Servicio Sears .............................. Contraporada Garant|a para equipos tractores Craftsman GARANTIA COMPLETA DE CRAFTSMAN PeR DOS Ai_,_O$desde la fecha de compra, redes las partes no sustituibles de este equipo garantizadas centre cua{quier defecto de materiat e mane de obra. Una parte no sustituible recibir_ reparaci6n o reemplazo gratuito en case si Ia reparacibn es fmposible. PeR C{NCO ANOS desde la fecha de compra, e! bastidor y el eje delantero de este equipo garantizadcs centre cualquier defectc de material o mane de obra. Un bastidor o eje delantero recibir_ reperaci6n o reemplazo gratuito en case si la reparacibn es imposib{e. tractor est&n defectuosa tractor est&n defectuoso DURANTE 90 DiAS desde [a fecha de compr_, la bater[a (una parte sustituible) de este equipo tractor est,_ garantizada centre cuafquier defecto de materia{ o mane de obra (nuestra prueba comprueba qua no contendr& carga). Una bater_a defectuosa recibir#, un reemp[aze gratuito en case. GARANTiA LIMITADA DE PeR VIDA ADIOIONAL en el EJE DELANTERO DE HIERRO COLADO (si est_ provisto) DURANTE EL TIE_IPO EN QUE SE USE per el propietario original despu_s del quinto argo a partir de la fecha de compra, el eje delantero de hierro colado (si est& provisto) de este equipo tractos est_ garantizado centre cualquier defecto de material o mane de obra. Con el ¢omprobante de compra, un eje delantero de hierro colado recibir& un reemplazo gratuito en case. SERVlOlO DE GARANTiA Pare conocer los detalles de la cobertura de garant_a pare obtener una reparac}6n o reemplazo llama al _-800-659-5917 6 visite el sitio web: www. craffsman.com gratuito, En todos los cases anteriores, si el reemplazo es imposible, el equipo tractor ser& sustituido sin cargo con el mismo modeto o uno equivalente. Toda ta cobertura de garantia anterior ser_ nula sieste equipo tractor se utilize a{guna vez pare brindar servicios comerciales o si se alquila a otra persona. Esta garantia cubre LJN{CAMENTE defectos de material y mane de obra. La cobertura de garantfa NO incluye: *Partes sustituibles (excepto la bateria) que se puedan desgastar per el use normat dentro det per{ode de garantla incluso, pore sin limitarse a, cuchillas, buj[as, filtros de aire, correas y fiitros de aceite. • Servicios de mantenimiento est_ndar, cambJos de aceite o afinaciones. • Reemplazo o reparacibn de neum#=ticos per pinchazos causados per objetos externos come clavos, espinas, tocones o vidr_os. , Reemplazo o reparaci6n de neum_ticos o ruedas per desgaste normal, accidentes o per operaci6n o mantenimiento incorrectos. , Reparaciones necesarias per abuse del eperador inctuso, pero sin limitarse a, daboa causados per remolcar objetos qua superen ia capacidad del equipo tractor, chocar centre objetos que doblen el bastidor, el ensambte del eje o el cigL3er_alo sobrepasar la ve{ocidad deI motor. ° Reparaciones necesarias per negEigencia del operador, incluso (pore sin limitarse a ello) da_,os el_ctdcos y mec&nicos causados per el almacenamiento incorrecto, per no user e] grade y Ia cantidad correctos de aceite de motor, per no mantener del muelte {ibre de residues inflamab]es o per no mantener el equipo tractor de acuerdo con las instrucciones que contiene el manual deI operador. • Limpieza o reparaciones del motor (sistema de combustible) cuando se determina que se us6 combustible contaminado y oxidado (sarro). En general, e[ combustible debe usarse dentre de {os 30 d_aa posteriores a su compra. • Deterioro y desgaste normal de {os acabados exteriores o sustitucibn de rbtulos de productes. Esta garant{a Ie otorga derechos legales espec{ficos, y usted tambi_n puede tenor ctros detaches qua varian de un estado a otro. Sears Brands Management Corporation, Hoffman Estates, IL 60179 36 _PELIGRO: Esta Maquina cortadora es capaz de amputar las manosy los pies y de lanzar objetos, s| no se observan las instrueciones de seguridad siguientes se pueden producir lesienes graves o la muerte. • No maneje la m6quina si no tiene la trampa _b.ADVERTENC1A: Siempre desconecta etalampare c6sped complete, la canaleta de descarga bre de ta bujia y p6ngalo donde no pueda entrar u otros dispositivos de seguridad en su tugar en contacto con la bujia, pare evitar el arranque y en funcionarniento. per accidente, durante la preparaci6n, el trans• Ralentizar antes de girar. porte, el ajuste o cuando se hacen reparaoiones. • Nunca dejar una m&quina encendida sin vigi_DVERTENCIA: No avancecuestaabajo a punlancia. Apagar siempre Ias cuchillas, poner et to muerto ya qua podria partier el control deltractor, freno de estacionamiento, parer el motor, y AOAADVERTENCIA: Rernolque solamente tos quitar las Itaves antes de bajar. accesedos recomendados y conformes a Ias • Desenganche Ias hojas cuando no est6 cortancaracteristicas indicadas per et fabricante de su de c6sped.Apague el motor y espere haste que tractor. Tenga cuidado y prudencia al utitizar el todas Ias partes se detengan per complete antractor. Cuando se encuentre en un declive, eper tes de limpiar la m&quina, retirar ta trampa para utitizando exclusivamente la velocidad m_,s baja. c6sped o destapar la canaleta de descarga. En case de un deciive una carga excesiva po- Hacer funcionar la m&quina e61ocon la luz del dria resultar pefigrosa. Los neum_ticos pueden dia o luz artificial buena. pettier la tracci6n con eI suelo y hacerle perder • No hacer funcionar la m&quina estando bajo et control de su tractor. los efectos de alcohol o droga. _DVERTENCIA: E1tube de escape det motor, •Poner atenci6n aI tr&fico cuande se opera cerca de callas o se cruzan. algunos de sue constituyentes y algunos componentes de1 vehtculo contienen o desprenden • Porter Ia m&xima atenci6n al cargar o descar* productes qutmicos conocidos en el Estado de gar la m&quina en una caravana o cami6no California come cause de c&ncer y defectos al • Uevar siempre gafas de protecci6n cuando se nacimiento u otros defies reproductivos. hace funcionar la m&quina. _DVERTENClA: Los bornes, terminates y ac• Los dates indicanque los operadores a partJr de los 60 aSos est&n afectados per un gran cesorios relatives de ta bateria contienen plomo porcentajede betides relatives ala eonducci6n o cornpuestos de plorno, productos qulmicos conocidos en el Estado de California cerno cause del aortae@sped. Estos operadores tendr/an que evaluar su habilidad de hacer funcionar de c&ncer y defectos al nacimiento u otros defies el cortac@spedde mode lo bastante seguro reproductivos, Laver las manes despu_s de pare proteger a st mismos y aotras personas maniputar|os. de betides graves. I. FUNCIONAMIENTO GENERAL • Seguir las reeomendaciones del fabficante • Leer,entender y seguirtodas las instrucciones pare los pesos y contrapesos de las ruedas. sobre Ia m&quina yen eL manual antes de - Mantener la m_quina libre do hierba, hojas u empezar. otros escombros qua pueden tocar el tube de • No poner las manes o los pies cerca de partes escape/partes del motor calientes y quemarse. giraterias o debajo de la rn&quina, mantener No permitir que el puente del cortac_sped siernpre timpia la abertura de descarga. cargue hojas u otros residues qua pueden • Permitir el funcionamiento de la m&quina s61o causer acumulaciones. Limpiar toda salpicadura de aceite o carburante antes de hacer a adultos qua tengan familiaridad can las instrucciones. operaciones sobre la m&quina o guardarla, bejada enfriar antes de guardarla. • Limpiar eI &tea de objetos come piedras, juguetes, cables, etc. qua pueden ser recogiII. FUNCIONAMIENTO EN PENDIENTES dos y disparados con las cuchil|as. Las pendientesson el mayor factor de accidentes • Asegurarse de que el &rea est6 tibre de otras relatives ala p_rdida de control y vuelco, qua personas antes de ponerla en marcha. Parer pueden causer severas heridas o muert.e. El funla m&quina si alguien entre en el &tea. cionamiento en pendientes requiem una atenci6n • Nunca llevar pasajeros. extra. Si no es posibfe hater marcha atr&s en una • Ne carter marcha atr&s a[ no set absolupendiente osi te sientes incomodo, no la cortes. tamente necesario. Miter siempre abaje y • Cortar hacia arriba y abajo de una pendiente, detente rnientras se precede arras. no de mode horizontal. • Nunca dirigir el material descargado hacia ha• Pener atenclones a los hoyoe, las raices, los die. Eviler descargar material centre parades bultes, lee piedras u otres objetos escondides. u obstrucciones. El material podria rebotar El terreno irregular puede volcar la m,_quina. hacia el operador. Parer las cuchillas cuando La hierba alta puede esconder obst&culos. se pasan superficies de grava. 37 • Escoger una vetocidad de marcha baia de mode que no sea necesario pararse o cambiar estando en une pendiente. • No cortar Ia h[erbe mojada. Las ruedas pueden perder tracci6n, Porter siempre une marche cuendo se est& en pendientes. No poner en punto muerto e ir cuesta ebajo, • Evitar errancar, pararse o girar en una pendiento. Si tas ruedas pierden tracci6n, desconectar Ias cuchillas y preceder despacio cuesta abajo en Ia pendiente. • Mantener rode los movimientos en Ias pendientes tentos y gradual, No hacer cambios repentinos de velocidad o direcci6n, ya que pueden causar el escape de la m&quina. • Porter la m&xima atenci6n cuando [a m_quina fancione con captadores de hierba u otros dispositivos enganchados; pueden efectar la estabitidad de la m&quina, No usar en pendientes empinados. • No intentar estabilizar la m&quina poniendo el pie en et terreno. • No cortar cerca de bajadas, cunetas y odlles, Los m_.quina puede volcerse improvisemente si una rueda est_ en el horde o se hunde. 111.NlflOS _ADVERTENClA: LOS NII_IOS PUEDEN SUFRIR DANES CON EL use DE ESTE EQUIPC. La Academia Estadounidense de Pedietria (American Academy of Pediatrics) recomienda que s61o se permita a nir_os con una edad minima de 12 aSos manejar mbquinas cortac_sped manuates, y al menos de 16 e_os para mane|ar tractores cortac_sped, Si el operedor no pone atenciSn e la presencia de los niSos pueden ocurrir accidentes trbgicos. Los nir_os a menudo estAn atraidos per la m&quinay Ias actividad de cortar. No dar per hecho de que los niSos se queden adonde estaban Ia u31timavez que los vistes. ° Mantener los niSos fuera del Area de corte y vigilados per un adulto responsable que no sea el operador. • Estar alerta y apagar la m&quina si un nir_os entra en e} Area, • Antes y durante la marcha atrAs, mirar adelante y abajo para ver si hay ni_,os pequeSos. • Nunca ]levar n#_os,incluso si hay las cuchillas apagadas. Podrian caer y herirse seriamente o interferir con el funcionamiento seguro de la mAquina, los niSos que se ban llevado prec_ edentemente pueden aparecer de pronto en et &tea de code per otto paseo y ser atropelIados o tumbedos per la m&quina. • Nunca dejar que los niSos maniputen la m#.quine. 38 • Tener el m&_<imocuidado cuando se acerca a cantos eiegos, arbustos, &rboles u otros objetes que pueden impedir la vista de ni_os. IV. REMOLQUE • Remolcar s6to con una m_quina que tenga un gancho diseSedo pare remotcer. Engancher el equipo o remolcar s61o en el punto dispuesto at efecto, • Seguir las recomendeciones del productor con respecto a los Iimites del equipo per remolcar y el remolque en pendientes, • Nunca permitir que niSos u otras personas est_n dentro del equipo per remolcar, • En pendientes, el peso deI equipo remolcado puede eausar ]a p6rdida de tracci6n y Ia p@rdida de control, • Viajar despacio y dejar m,_s distancia para frenar. V. SERVIClO MANIPULACI_)N SEGURA DE LA GASOLINA Para evitar heddas personales o daSos alas cosas, poner el m#c_imo cuidedo a la hera de menipular la gesolina, La gasoline es extremamente inflamable y los vepores son explosives, • Apagar redes los cigarrillos,cigarros, pipas y otras fuentes de ignici6n. - Usar s61oeontenedores para gasolina aprobados, • Nunce quitar el tap6n de la gasolina o a_adir carburante con eE motor en marcha, dejar en#iar et motor antes del abestecimiento de la gasolina. • Nunca abastecer la m_.quina al interior de un local. ° Nunca guardar la m&quina o el contenedor del carburante donde haya una llama abierta, chispas o una tuz piloto come un calentador de agua u otros dispositivos. • Nunca Itenar los contenedores a{ interior de un vehfculo o en una caravana o cami6n recubiertos con un forro de pl&stico. Co_ocer siempre los contenedores en el terreno leios del vehiculo cuando se est& llenando. • Quitar el equipo de gas del camiSn o ceravana y abastecedo en et terreno, Si no es posible, abastecer dicho equipo con un contenedor port&til, m,_sbien que de un surtidor de gasolina. • Mantener Ia boquitla a contacto del borde del depSsito de carburante o la abertura deI contenedor durante toda ia operaci6n de abastecimiento. No utilizar un dispositivo con boquilla cerrada-abierte. • Si se vierte earburante sobre Ia ropa, cambiarse la ropa inmediatamente. • Nunca Ilenar el dep6sito mAs de lo debido. Volver a colocer el tapSn del gas y cerrar de mode t]rme. OPERACIONES DE SERVICIO GENERALES • Nunca hater funcionar la m_quina en un &rea cerrada. • Mantener todas lastuercas y pernos apretados para asegurarse de que trabaja en condiciones seguras. • Nunca modificar los dispositivos de seguddad. Controlar su correcto funcionamiento regularmente. • Mantener la m_quina libre de hierba, hojas u otros residues acumulados. Limpiar las salpicaduras de aceite o carburante y quitar cuatquier cosa mojada con carburante, Dejar que Ia m&quina se enfde antes de guardada, • Si se golpea un objeto ajeno, hay que pararse e inspeccionar la m&quina. Reparar, si es necesarto, antes de volver a poner en marcha. • Nunca hacer ning_n ajuste o reparaci6n con el motor en funei6n. • Verifique los componentes de la trampa para c@spedy la canaleta de descarga con frecuenciay sustituya con repuestos recomendados par el fabdcante cuando sea necesario. • L_s cuchillas del cortac_sped son afiladas. Envolver la cuchilla, ponerse guantes y porter Ia m_Jma atenci6n cuando se hacen operaciones en elias. @@@@@ • Controlar el funcionamtento det freno frecuentemente. Ajustar y hacer las operaciones de mantenimiento cuando eso sea neoesario. • Mantener y sustituir Ias efJquetasde seguddad e instrucci6n, cuando sea necesario. • Asegurarse de que el _rea est_ libre de otras personas antes de ponefla en marcha, para Ia m&quina si aIguien entra en el &tea. • Nunca llevar pasajeros. • Nocortarmarchaatr&selnoserabsofutamente necesario. Mirar siempre abajo y delante mientras se precede atr&s. • Nunca Itevar nifios, inclusosi hay tascuchillas apagadas. Podrlan caer y henrse seriamente o interferircon eI funcionamiento seguro de la m&quina, los nifios que se ban llevado precedentemente pueden aparecer de pronto en el &tea de carte par otro paseo y ser atropellados o tumbados per Ia mAquina, • Mantener Ios niSos fuera deI &tea de carte y vigilados par un adulto responsable que no sea el eperador. 39 • Estar alerta y apagar la m_.quina si un nifios entra en et _.rea, • Antesydurantelamarchaatr&s, miraradelante y abajo para ver si hay nifios pequefios. • Cortar hacia arriba y abajo de una pendiente (15° M_), no de mode horizontal. • Escoger una velocidad de marcha baja de mode que no sea necesario pararse o eambiar estando en una pendiente. • Evitar arrancar, pararse o girar en una pendienre. Si las ruedas pierden tracci6n, desconectar las cuchitlasy precederdespacio cuesta a_bajo en ta pendiente. • Si la m&quina se para mientras va cuesta arriba, desconectar las cuchillas, porter la marcha atr&s y ir hacia atr_.s despacio. • No girar estando en pendientes si no es necesario, y luego girar deepacio y gradualmente cuesta abajo, st es posib[e. • Atcargarodescargarlam_quina, nosobrepase et _ngu]o m_Lximorecomendado de 15 °. ESPEC|FICACIONES DELPRODUCTO En el estado de California, la ley exige Io anterior (Secci6n 4442 del "California Public Resources Code"). Otros estados pueden contar con otras leyes parecidas, Las leyes federa]es se aplican en la tierras federales. Su centre de Servicio m_.s cercano tiene disponible amortiguadores de chispas para el silenciador. (Vea la secci6n de Partes de Repuesto en el manual Ingles del duefio.) Capacidad y Tipo 4,0 Galones/15,14 L de Gaso]ina: Regular Sin Plomo Tipo de Aceite (API: SG-SL): SAE 10W30 (sobre 32°F/0°C 8AE 5W30 (deabajo 32°F/0°C Capacidad de Aceite: Con Fi]tre: Buj[a Champion RC12YC (Abertura: .030"/0,76 ram) Marcha 1st 1.0/1,6 Adetante: 2rid 1.4/2,3 3rd 2.1/3,4 4th 3.1/5,1 5th 4.0/6,4 61h 5.1/8,2 Atr&s: 0 - 1.6/2,6 15 A @ 3600 RPM Velocidad de Recarrido (MphiKph): Sistema de Carga: 64 OzJ1,96 L Bateria: Amp/Hr: Min. CCA: Modelo Tamaflo: Torsi6ndel Perno de Ia CuchilIa: 45-55 Ft. Lbsj62-75 Nm AOUERDOS DE PROTECClON PARA LA REPARACION Congratulaciones per su buena compra. Su nuevo producto Craftsman® est,, disehado y fabdcado para funcionar de mode liable per muchos aSos. Pero come todos los productos, puede necesitar alguna reparaci6n de tanto en tanto. En este case tenet un Acuerdo de Protecci6n para la ReparaciSn puede hacertes ahorrar dinero y fastidios. Compre ahora un Acuerdo de Protecci6n para la Reparaci6n y prot6gese de molestias y gastos inesperados. 28 230 U1R Un Acuerdo incluye los puntos siguientes: • Servieio experto de nuestros 12.000 especialistas profesionales en la reparaci6n. ° Servicio ilimitado sin cargo alguno para Ias partes y la mane de obra sobre todas las reparaciones garantizadas. • Sustituci6n del producto si su producto garantizado no puede set arreglado. • Descuento del 10% sobre el precio corriente det servicio y de Ias partes re_ativasat servicio no cubiertas per el acuerdo; tambi_n el 10% menos sobre el precio corriente de un control de mantenimiento preventivo. • Ayuda rapida portel6fono-soportetelef6nico per parte de un representante Sears sobre productos que requieren un arreglo en casa, y adem_.s una programaci6n sobre los arreglos m&s convenientes. Cuando se ha comprado el Acuerdo, basta con una I_amadatelef6nica para programar elservicio. Puede Ilamar cuando quiera, d_ay noche o fijar en linea una cita para obtener el servicio. Sears tiene m&s de 12.000 especialistas profesionales en la reparaci6n, que tienen acceso a m&s de 4.5 mitlones de partes y accesorios de ca]idad. Este es el tipo de profesionalidad con que puede contar para ayudar a alargar la vida del producto que acaba de comprar, per touches aries. iCompre hey su Acuerdo de Protecci6n para la Reparaci6n! Se ap_icanalgunas limitaciones y exclusiones. Para conocer los precios y tener rn_s Infer* maoibn, Ilame al 1-800-827-6655. FELICITACIONES pot la compra de su tractor. Ha side d[seSado, planificado yfabricado para darle la mejor confiabilidad y el meier rendimiento posib]e. En el caso de que se encuentre con cualquier problema que no pueda solucionar f&citmente, haga el favor de ponerse en contacto con un centre de servicio Sears o con un otro centro de servicio cualificado. Cuenta con representantes bien capacitados y competentes y con las herramientas adecuadas para dar/e servicio o para reparar este tractor. Haga el favor de leer y de guardar este manual. Estas instruc-ciones le permitir_.n montar y mantenet su unidad en forma adecuada. Siempre observe las "REGLAS DE SEGURIDAD." RESPONSABILIDADES DEL CLIENTE • Lea y observe las reglas de seguridad. • Siga un programa regular de mantenimiento, cuidado y use de su tractor. - Siga las instrucciones descritas en Ias secclones "Mantenimiento" y 'Almacenamiento" de este manual. ° Utilice prendas de seguridad adecuadas aI manejar la m&quina, incluidos(come mfnimo) calzado de seguridad, galas protectoras y protecci6n auditiva. No utilice pantatones cortes yio calzado abierto cuando certe la hierba. • Informe siempre a alguien de que se dispone a cortar Jahierba en e! exterior. _I_,DVERTENCIA: Este tractor viene equipado con un motor de combusti6n internay no se debe usar sobre, o cerca, de un terreno no desarroltado cubierto de bosques, de arbustos o de c_sped, o menos que e] sistema de escape deI motor venga equipado con un amortiguador de chispas que cump_a con tas leyes locales o estatales (si existen). Si se usa un amortiguador de chispas, el operador debe mantenerlo en condiciones de trabajo eficientes. SERVICIO DE INSTALACION SEARS Para /a instalaci&n profesfona/ Sears de aparatos de casa, puertas de garaje, calentadores de agua y otros importantes articulos para la casa, en U,S.A Ilamar a 1-800-4-MY-HOME® 4O Segadora Rueda Delantera De La Segadora de es|abones de ievant_miento traseros (5) 1-3/16" Arandela % (1) Abrazadera pequefio _-_ © (I) Perno (1) 1-1t4" Arandela _., de retenci6n "_ (1) Eslabone _-_---___ s _ de levantamiento delanteros _% (5) Abrazadera ,, grands - \\ _p_.. _ de retencibn (1) Rueda (1) 3/8-16" Tuerca _ ....................... Si Los Tiene _ (1)Tubo dedesagLie Hoja de pendiente I (1) Barra Antioscilacf6n {1) 3/4" Arandeta _I Llaves (2) Llaves (I) Abrazadera pequeho de retencibn 41 _ _; , Su tractor nuevo ha side montado en la f&brica con ia excepci6n de aque]las partes que no se han montado per razones de envio, Para asegurarse que su tractor funcione en forma adecuada y segura todas Ias partes y los articulos de ferreteda que se monten tienen que ser apretados en forma segura. Use las herramientas correctas, segSn sea necesado, para asegurarse de que est_n apretados en forma segura, HERRAMtENTAS NECESARIAS PARA 3, Desconecte Ia palanca paratrabar el asiento EL MONTAJE en la posici6n. Un juego de ttaves de tube facilitar& el montaje, A continuaci6n se enumeran los tamar_os de las llaves estbndar, (2) Llaves de 7/I6" Cuchfllo (1) Llaves de t/2" Medidor de presi6n (1) Llave de 3/4" Pinzas (1) Montura de 3/4 pulg, con mando de trinquete (1) Uaves de 1/2" Linterna AVISO: Ahora puede rodar su tractor fuera de la Cuando en este manual se mencionan los t@rmi- corredera. Siga las siguientes instrucciones para remover el tractor de [a corredera. nos"mane derecha" o "mane izquierda" se refiere a _ADVERTENCIA: Antes de empezar, leer, cuando usted se encuentra en la posici6n de operaci6n (sentado/a detr&s del volante de direcci6n). entender y seguir todas ]as instrucciones presentes en Ia secci6n Operaciones de este manual, PARA REMOVER EL TRACTOR DE LA Asegurarse que el tractor est@en un ,_rea bien CAJA DE CARTON ventilada, Asegurarse que la zona delante del DESEMPAQUE LA CAJA DE CARTON tractor est_ libre de otras personas y objetos. • Remueva todas las partes sueltas que est@n PAPA HACER RODAR EL TRACTOR FUERA accesibles, y las cajas de partes, de la caja DE LA CORREDERA (VEA LA SECCION DE de cart6n grande. LA OPERAC1ON PARA LA LOCAL|DAD Y LA Cortar alo largo de las Ifneas de puntosen todos FUNC|(3N DE LOS CONTROLES) los cuatro paneles de cart6n. Remover los pa1. Levante la palanca de levantamiente del acneles de cierre y aplanar los paneles laterales. cesorio a su posici6n mas aita, • Remueva la segadora y los materiales del 2. Suelte el freno de estacionamiento presionembalage. ando el pedal del embragueifreno. Revise si hay partes sueltas adicionales o 3, Ponga la palanca de cambios en la posici6n cart6n y remu_valas, de neutro. ANTES DE REMOVER EL TRACTOR DE 4. Haga rodar e[ tractor hacia delante fuera de la corre-dera, LA CORREDERA Continuar con las siguientes instrucciones. VERIFIQUE LA BATERiA INSTALE LA SEGADORA 1. Levante del capota a [a posici6n levantada. AVlSO: Siesta bateria esta utilizada despu@sdeI rues y aSo indicado sobre Ia etiqueta ({a etiqueta que se encuentra entre los terminates), cargue ia bateria per un minimo de una hera a 6-t0 amps. (Vea "BATERIPt' en {a secci6n de Mantenimento de este manual). Para instale ]a bateria, y cable de la bateria, realice el procedimjento descrito en "REEMPLAZAR LA BATE RIA" deleap{tulo de Servicio y Ajustes de este manual, ACCIONE LA PALANCA DEL FRENO DE ESTACIONAMIENTO Y LA PALANCA DE LEVANTAMIENTO DEL ACCESORIO INFERIOR Presione el pedal de em bragueifreno completamente hasta abajo y mant_ngalo apretado, Tire y mantenga Ia palanca del freno de estao cionamiento haeia arriba, libere la presi6n del pedal de embragueifreno y, luego, suelte la palancadelfrenode estacionamiento, El pedal debe permanecer en posicidn de frenado. Aseg_rese de que el freno de estacienamiento mantendr& asegurado el tractor. Etil // AJUSTE EL ASIENTO t, Si_ntese sobre el asiento, 2. Levante la palanca del ajuste (A) hacia arriba y mueva el asiento hasta que alcance una posici6n c6moda que lepermitapresionarcompletamente sobre e[ pedal del embragueflreno. 42 PRECAUCION: La palancade Ievantamiento est&accionadapor resorte. Sost_ngalafirmemente apretada, b&jela lentamente y eng&nchela en ta posiciSn m&s baja. Lapalanca de Ievantamiento se encuentra en el tado izquierdo de la defense. 3. GIRE EL VOLANTE HACIA LA.IZQUIERDA Y UBIQUE LA CORTADORA DE CESPED EN SU LUGAR • Gire el volante completemente hacia la lzquierda y ubique la cortadora de c6sped en el lado derecho del tractor con el blindaje deflector (Q;)ala derecha+ PaIanca De Levantamiento Parte Delantera 2. ARME LA RUEDA CALIBRADORA DELANTEP_ ('v_ EN LA PART E DELANTERA DE LA CORTADORA DE CESPED Parte Trasera H, Escuadra De La Cortadora De C_sped Delantera Rueda CaIibradora Deiantera Pemo Con Resalto Arandeta De 1-1/4 Tuerca De Seguridad De 3/8-16 Q. Blindaje Deflector 4. DESLICE LA CORTADORA DEBAJO DEL TRACTOR DE C(ESPED • Lleve la correa hacie adelante y verifique que sutrayectoriaseacorrectaentodoslossurcos de Ia polea de la cortadora de c_sped. NOTA: Aseg_rese de que los brazos de suspensi6n lateral de la cortadora de c6sped (A) est_n orientados hacia adelante antes de deslizar ta cortadora de c_sped debajo del tractor. Destice la cortadora de c_sped debajo del tractor haste que se encuentre centrada debajo del tractor. W+ X, Y. Z. ® A+ Brazos De Suspensi6n Laterat De La Cortadora De C6sped B. Resorte De Retenci6n C. Eslabones De Levantamiento Traseros D. Escuadra Trasera Derecha De La Cortadora De C_sped E. Conjunto De Eslabones De Levantamiento DeIanteros E Escuadra De Suspensi6n Delantera H. Escuadra De La Cortadora De C_sped Delantera I. EscuadraTrasem Izquierda De La Cortadora De C_sped K, Vadlla Tensora De La Correa L Escuadra De Bloqueo M. PoIea Del Embrague Del Motor Q. BIindaje Deflector S, Barra Antibalanceo W. Rueda Callbradora Delantera 43 Haga oscilar el extremo con la arandela integrada de la barra antibalanceo (S) hecia la escuadra de Ia plataforma de la cortadora de c@speden el Iado derecho de la cortadora. Inserte el extremo con Ia arandela integrada de Ia barra en el agujero de la escuadra trasera de la cortadora de c@sped(D). Mueva Ia cortadora de c@spedsegt_n sea necesario para inserter el exttemo con ta arandela integrada de la barra en Ia escuadra trasera de !a cortedora de c@sped (D). Asegure con una arandela pequeSa y un resorte de retenci6n peque_,o, como se i[ustra. A. Brazos De Suspensi6n Lateral De La Cortadora De C_sped Q, Blindaje D,,e, fI,ector 5. SI LATENE, INSTALE LA 8ARRA ANTIBALANCEO (S) BARRA _ ANTIBALANCEO Hacia El Transeje _X_ Extrerno En 90° (S) Hacia La Plataforma De La Cortadora ................. De C_sped D. Extremo Con Arandela Integrada S. Desde el lado derecho de la cortedora de c_sped, inserte primero el extremo en90 ° de la barra antibalanceo (S)dentro del agujero de la escuadra de transeje (_, ubicado cerca de la rueda trasera izquierda edelante deI transeje. NOTA: Puede resultar 0tiI user una linterna. 6. • EscuadraTrasera Derecha Cortadora De C6sped Barra Antibalanceo De La INSTALE LOS BRAZOS DE SUSPENSION LATERAL DE LA CORTADORA DE ClaSPED (A) EN EL CHASfS Ubique el aguiero delantero del brazo de suspension lateral (A) sobre la chaveta en la parte exterior del chasis del tractor y asegure con una arandela grande y un resorte de reteaci6n grande (B). Repita en el lado opuesto del tractor. Escuadra De Transeje (T) Ubicada Entre !_as Ruedas A. Brazos De Sus }ensi6n Lateral De La Cortadora De C@sped B, Resorte De Retenci6n D. Escuadra Tras-Era Derecha De La Cortadora De C_sped 7. NOTA: Dependiendo del modelo, ]a escuadra (T) puede ser diferente de la que se ilustra, pero el agujero pare la barra antibalanceo estar& en la misma posici6n!ubicaci6n. 44 1NSTALE LOS ESLABONES DE LEVANTAMIENTO TRASEROS (C) Inserte el extremo de varilla del eslab6n de ]evantarniento trasero (C) dentro del agujero (U) en el brazo de suspensi6n def eje de levantamiento del tractor y haga oscilar el eslab6n hacie abajo hacia ta cortadora de c@sped. Levante laesquina trasera delacortadora de c_sped yubiquela ranuraen elconjunto deeslabones sobre la chaveta en ]a escuadratrasera Mu6vase haste el lado izquierdo de Ia cortadorae inserte un resorte de retenci6n grande ((3)atrav6e del agujero det eslab6n detantero (E) detr_is de la escuadra de suspensi6n delantera (F). Inserte el otto extmmo de1eslab6n (E) en el agujero de la escuadraderechade tacortadora de c_sped (H) y asegure con una arandela y un resorte de retencibn peque_o (J). delacortadora (D); asegure conunaarandela grande y un resorte de retenci6n grande, Repita en el lado opuesto del tractor. NOTA: Requiere levantar Ia plataforma. 9. INSTALE LA CORREA EN LA PC)LEA DEL EMBRAGUE DEL MOTOR (M) Desenganche {avarilla tensora de la correa (19 de la escuadra de bloqueo (L). lnstale ta correa en la polea del embrague dei motor (M) C. D. ' U. IEslabones De Levantamiento Traseros Escuadra Trasera Derecha De La Cortadora De C6sped Agujero 8. 1NSTALE EL ESLABON DELANTERO (E) , Gire el volante haste ubicar [as ruedas derechas en posici6n de avance. Desde la parte delantera def tractor, inserte el extremo de varilla de1eslab6n delantero (E)a tray,s del agujero delantero de Ia escuadra de suspensi6n delantera deI tractor (F). . Ubicaci6n Del Eslab6n / i P_ _ I; ¢_____i \ Embrague Det Motor IMPORTANTE: Verifique que Ia trayectoria de la correa sea correcta en todos los surcos de la polea de la cortadora de c_sped y debajo de [as cubiertas de mandril. • Enganche Ia vafilla tensora de ta cotrea (K) en la escuadra de bloqueo (L). PRECAUClON: la varilla tensora de la correa est,. accionada per resorte. Sostenga la varilla t_rmemente apretada y eng&nchela lentamente. • Eleve ta palanca de levantamiento del accesorio haste la posici6n m_Lxima. • Si es necesario, ajuste las rueditas del calibre antes de poner en t_Jncionamiento la corta_ dora, como se ilustraen el cap|tulo de Manejo de este manual. PARA REEMPLAZAR LA CORREA DE LA SEGADORA Reatice el procedimiento descrito en "PARA REEMPLAZAR LA CORREA DE LA CUCHILLA DE LA SEGADORA" de1 capitulo de Ser_cio y Ajustes de este manual. E G. H, iJ. Escuadra De Suspensi6n Delantera Resorte De RetenciSn Grande EscuadraDeLaCortadoraDeC_spedDelantera Resorte De RetenciSn Pequefio Polea De[ Embrague Del Motor 45 REVISION DE LA PRESION DE LAS LLANTAS Las llantas en su unidad fueron infladas demasiado en la f&brica por razones de envio. La presi6n de las llantas correctas es importante para obtener el mejor rendimiento en el corte. • Reduzca la presi6n de los neum&ticos a la PSI que se indica en estos. REVIS|ON DE LA NIVELACION DEL CONJUNTO Para obtener los mejores resu[tados en et corte, la caja de la segadora tiene que estar nivelada en la forma adecuada. Vea"PARA NIVELAR LA CAJA DE LA SEGADORA_' en la seccibn de Servicio y Ajustes de este manual. REVISION DE LA POSICION ADECUADA DE TODAS LAS CORREAS Vea las figuras que aparecen para cambiar las correas de impulsi6n de la cuchilla de la segadora y de movimionto en la secci6n de Servicio y A)ustes de este manual. Verifique que Iascorreas slgan su paso correcto. REVISION DEL SISTEMA DE FRENOS Una vez que usted haya aprondido a manejar su tractor, verifique que el freno funcione correctamente. Ver "PARA VERIFICAR St FUNCIONA BIEN EL FRENO" en el capitulo de servicio y ajustes de este manual. 46 t/f LISTA DE REVISION Antes de operary de disfrutar de su tractornuevo, le deseamos que reciba el mejor rendimionto y la mayor satisfaccion do este productode calidad. Haga el favor de revisar la lista a continuacion: vf Se han completado todas las instrucciones de montaje. J" No quedan partes sueltas en la caja de cart@n. t/" La bateda est& preparada y cargada en forma adecuada. ,,/Et asiento ha sido ajustado onforma c6meda y apretado en forma segura. vz Todas las Ilantas ban sido infladas en forma adecuada. (Para fines de envio, Ias Ilantas se inflaron demasiado en la f&brica.) t/" Aseg[irese que el conjunto segador est@ nivelado en forma adecuada, de fado a ]ado y desde adelante hacia atr&s, para obtener los mejores resultados en el corte. (Las I]antas tienen que estar infladas en forma adecuada para Ia nivelaci6n.) t/" Revise Ias correas de impulsibn y de ]a segadora. Aseg_rese que recorran el paso adecuado alrededor de las poleas y dentro de todos los fijadores de ]as corroas. vf Revise el alambrado. Fijese que todas las conexiones todavia est6n seguras y que los alambres ost6n sujetos en forma adecuada. AI mismo tiempo qua aprende a como usar su tractor, preste atenci6n extra a los puntos de oortancia que se presentan a continuaci6n: El aceite del motor tiene que ]legar al niveI adecuado. J El estanque de combustible tiene que estar Ilono con gasolina sin plomo regular, nuova y limpia. t/Familiarfcese con todos los controfes - su ubicaci6n y su funci6n. OpSrelos antes de hacer arrancar el motor, Vf AsegSrese que el sistema de #enos ost6 en una condici6n de operaci6n segura. J" Asegurarse de que el Sistema de Presencia de! Operador y el Sistema de Funcionamiento AtrAs (ROS) funcionan de modo adecuado (Vet las Secciones de Funcionamiento y Mantenimiento en este manual). Estos simbolos pueden aparecer sobre su tractor o on la literatura proporcionada con el producto. Aprenda y comprenda sus significados. R MARQHAATR_.S MOTOR APAGADO N H L I',.! NELrrRo ALTO BAJO ESTRANGULACIC)N R,g, PiBO LENTO MOTOR MOTOR FRENODE ALTURADE LA LEVANTAMIENTO SISTEMA ENCENDIDO EN MAROHA ESTACIONAMIENTO SEGAOOFL_. DE LA SEGADORA F'L_NCIONAM|ENTO ATPJ_S(ROB) ATR/_S HAC]AADEI-_.NTE CRUCERO DE EMBRAGUE ®@@@@ ACCESOR|O DEL EMBRAGUE ENGANCHADO ACCESORIODEL PELIGRO,GUARDELAS MANTENGAEL PEHGROSDIE EMBRAGUE MANOS Y LOS PIESLE30S AREA DESPEJADA PENDIENTES OESENGANGHADO (Veala secci_nde I_ reglasdeseguridad) PELIGRO indica un peligro que. si no se evita, provoca muerte o lesiones graves, ADVERTENCIA unopeligro que,graves. si no se evita, puede provocar indica muerte leslones RUEDA LIBRE (Solamente para los modelos automatico) & No seguir las siguientes instrucciones puede provocar heridas o muerte. Los srmbolos de aviso de seguridadse utilizan para identificar informacioaes de seguridad re[ativas a peligros que puedenprovecar ia muBrte, heridas graves ylo dafios a Ia m&quina. PRECAUCI(_N indica un peligro qua, si no se evita, puede provocar lesiones ligeras o moderadas, PRECAUCION cuando se utiliza sin el simbelo de aviso, indica una situaci6n que puede provocar dafios at tractor ylo al motor. SUPERFICIES CALIENTES indica ua peligro que, si no se evita, puede provocar la muerte, leslones graves y/o danes a la mdquina, FUEGO indica un peligm que, si no se evita, puede provocar la muerte, lasiones graves ylo danes a la m_,quina. 47 FAMtLIARICESE CON SU TRACTOR LEA ESTE MANUAL LAS REGLAS DE SEGURIDAD ANTES DE OPERAR SU TRACTOR Compare las i]ustracionescon su tractor para familiadzarse con las ubicaciones de los diversos controles y ajustes. Guarde este manual para referencia en el futuro. Nuestres tractores cumplen con los est&ndares de seguridad del American National Standard Institute. (A) PALANCA DEL LEVANTAMIENTO DELACCESORIO - Se usa para tevantar, bajar y ajustar el conjunto segador o los dem,_s accesodos montados en su tractor. (B) PEDAL Dt=L EMBRAGUE/FRENO - Se usa para desembragar y frenar el tractor y para hacer arrancar el motor_ (c) PALANCA DEL FRENO DE ESTAOIONAMIENTO - Asegura el pedal del embrague/freno en Ia posici6n del freno. (D) CONTROL DE ACELERAClON - Se usa para controlar Ia velocidad del motor, (E) INTERRUPTOR DEL EMBRAGUE DEL ACCESORIO - Se usa para enganchar las cuchilIas segadoras, o los dem,_s accesorios montados en su tractor. (F) INTERRUPTOR DE IGNICION - Se usa para hacer arrancar o hacer parar el motor. 48 (G) S,ISTEMA DE FUNCIONAMIENTO HACIA ATRAS (ROS) EN POSICI6N "ON" _ Permite ta operaci6n det conjunto segador o otro accesorio accionado mientras queen rev_s. (H) INTERRUPTOR DE LA LUZ - Enciende y apaga ]as luces de]anteras. (J) PALANCA DE MANDO CRUCERO -Se utiliza para fijar el movimiento hacia adelante deI tractor a la velocidad deseada sin apretar el pedal de marcha atrAs. (N) CONTROL DE ESTRANGULAOION - Se usa cuando se hace arrancar un motor fri'o. (P) DIS POSITIVO DE AVtSO DE SERVICIO [ CRONOMETRO - Indica cu&ndo hay que hacerles el servicio al motor y a la cortadora. La operaci6n de cualquier tractor puede hacer que salten objetos ex_afios dentro de sus ojos, Io que puede producir daSos graves en _stos, Siempre use anteojos de seguridad o protecciones para los ojos mientras opere su tractor o cuando haga ajustes o reparaciones. Recomendamos gafas de seguridad o una m&scara de visi6n amplia de seguridad usada sobre tas galas. COMO USAR SU TRACTOR PARA AJUSTAR EL FRENO DE ESTAC[ONAMIENTO Su tractor viene equipado con un interruptor sensor que exige {a presencia del operador. Cuando el motor est& funcionando, si el operador trata de bajarse deI asiento sin prirnero aplicar el freno de estacionamiento, se apagar,'_ el motor. 1. Presione el pedal ([3) deI freno completamente y sostengalo. 2. Jale hacia arriba la palanca del freno de mano ((3)y mant_ngala en esa posici6n; suelte gradualmente el pedal det ernbragueifreno (D), y luego suelte la palanca deI freno de rnano. El pedal tiene qua quedar en Ia posici6n de freno. Aseg_rese que el freno de estacionamiento va a sujetar el tractor en forrna segura. PARADA CUOHILLAS • DE LA SEGADORA MOTOR - Mover la palanca (D) de mando entre la pos{ci6n de velocidad media y rn_irna (r&p_da). AVlSO:Si no se mueve Ia palanca de mando entre la posici6n de velocidad med(a y m,_txirna (r&pida), antes de pararse, se puede causar un "retorno de llama" del motor. • Gire la llave de ignici6n (F) a ta posici6n de apagado "STOP" y remueva la Ilave al abandonar el tractor para evitar el uso no autorizado. • Nunca use la estrangutaci6n (N) para parar el motor. IMPORTANTE: Dejando el interruptor de {a ignici6n en cualquier posici6n otra que "STOP" causar i que la bater{a se descargue (muerta). AViSO: Bajo ciertas condiciones, cuando el tractor est_ parado con el motor andando en vacio, los gases de escape deI motor caliente pueden hacer que el c6sped se ponga "caf_." Para eliminar esta posibilidad, siempre pare el motor cuando pare et tractor en &teas con c_sped. _IkPRECAUCI6N: Siempre pare el tractor completamente, segt3n se ha descrito anteriormente, antes de abandonar la pos{ci6n del operador. - Mueva el interruptor del embrague deI accesorio a la posici6n desenga_chado (disengaged)(_). (?) lnterruptor Del Embrague Del Accesorio "Enganchar" (t'_) PARA USAR EL CONTROL DE LA AOELERAClON (D) Siempre opere el motor a una aceleraci6n completa. • Si el motor funciona a una velocidad inferior a la m&xima (r&pida), su rendimiento disminuye. • El rendimiento 6ptlmo se obtiene a lavelocidad m_ima (r&pida). lnterruptor del Embrague deI Accesorio "Oesengaz_cbado" IMPULSION DE REOORRIDO - Para parar el meeanisrno irnpu{sor, presione el pedal del frenoiembrague completarnente. • Mueva {a palanca de camb{os a la posic{6n (J) de neutro. PARA USAR EL CONTROL DE ESTRANGULACI6N (N) Use eI control de estrangulaci6n cuando est6 haciendo arrancar un motor frio, No [o use para hacer arrancar un motor caliente, • Para enganchar et controlde estrangulaci6n; tire Ia manUla hacia afuera. Lentamente, empuje la manilla hacia adentro para desenganchado. 49 PARA MOVERSE HACIA ADELANTE Y HACIA ATRAS La direccidn y ta velocJdad del movimiento son controladas per medio de Ia patanca de cambio (J). 1. Haga arrancar el tractor con eI pedal deI embrague/freno presionado y con Ia palanca de cambio en la posicidnde neutro. 2. Mueva la palanca de cambio a Ia posiciSn deseada. 3. Lentamente suelte et pedal de embrague/ freno para empezar con eJ movimiento. IMPORTANTE: Haga que el tractor pare completeamente antes de hacer cambios o de cambiar de engranajes, Si no se hace Io anterior se acortara la duracidn utit de su transe|e. PARA AJUSTAR LA ALTURA DE CORTE DE LA SEGADORA La posicibn de la palanca eIevadora (A)determina a qu_ altura se cortar& el cesped, • Coloque ta palanca elevadora en Ia ranura de Ia altura deseada. • Deslice el puntero de seSalizacidn (T) hasta esa altura, de mode de recordaria Ia prdxima vez qua corte el c_sped. La gama de Ia aItura de corte es de aprox(ma* damente 1 a 4 pulgadaso Las alturas se miden desde el suelo a la punta de la cuchilfa cuando el motor no est& funcionande, Estas alturas son aproximadas y pueden variar dependiendo de las condiciones del suelo, de la aJtura del c_sped y deI ripe del cdsped que se est& segando, • El c_sped promedio debe cortarseaproximadamente a 2-t/2 pu_gadas durante fa temporada fria y sobre 3 pulgadas durante los mesas calurosos. Para obtener un c_sped m&s saludable y de major apariencia, siegue a menudo y despu_s de un crecimiento moderado, . Para obtener el major rendimiento de corte, et c_sped que tiene m&s de 6 pulgadae de altura debe segarse dos veces. Haga el primer corte relativamente alto; el segundo a la altura deseada. PARA AJUSTAR LAS RUEDAS CALIBRADORAS Las ruedas calibradoras est&n bien ajustadas cuando se encuentran un poco a distancia del terreno aI mismo tiempo qua ta segadora est_ a Ia altura de corte deseada. Entonces [as ruedas calibradoras mantienen el conjunto segador en posicidn para prevenir el corte raspeo en casi todos los terrenos. AVlSO: Ajuste las ruedas calibradoras con el tractor en una superficie niveFada plana, 1, Ajuste Ia segadora a la altura de corte deseada con la manilta de aiuste de altura (Vea "PARA AJ USTAR LAALTURA DE CORTE DE LA SEGADOR_' en la seccidn de Operacidn de este manual), 2. Con la segadora a la altura deseada para la posicidn de corte, se tienen que montar ras ruedas calibradoras de mode que queden un poco sobre el sueto. Instale las ruedas calibradoras en el agujero adecuado con el perno con resalto, la arandela de 3/8, y la tuerca de seguridad de 3/8-16 y apri_telos en forma segura. 3. Repita eI procedimiento para el lade opuesto instalando la rueda calibradora en el mismo agujero de ajuste. PARA OPERAR LA SEGADORA Su tractor viene equipada con un interrupter sensor que exige Ia presencia del operador, Si el motor est& funcionando y et embrague del ac_ cesorio est& enganchado y el operador trata de bajarse del asiento, se apagar_, el motor. -I-lena qua mantenerse sentado compieta y centralmente en el asiento para impedir qua el motor vacile o se apague cuando se opera su equipo en terreno disparejo, &spare o en cerr0s. 1. Elija a qu_ altura cortar_ el c_sped per medio de ]a palanca elevadora. 2. Haga arrancar las cuchil|as de la segadora enganchando el control del embrague del accesodo. PARA PARAR LAS CUCHILLAS DE LA SEGADORA- desenganche el control del embrague det accesorio. ,10&PRECAUCK_N: No opera Ia segadora sin, ya sea, el recogedor de c_sped complete en las segadoras asi equipadas o con |a proteccidn contra la descarga en su ]ugar. 5O FUNCIONAMIENTO ATP._,S Tu tractor est& equipado con el Sistema de Funcionamiento Atr_.s (ROS). Cualquier tentativa del operador de viajar marcha atr&s con el embrague puesto apagar& el motor a manes que la Ilave de ignici6n se ponga en la posici6n de "ON" del ROS. ATENCION: Ir marcha atr&s con el embrague puesto para cortar, no es recomendable. Poniendo el ROS en posici6n "ON", para permitir el funcionamiento atr&s con el embrague puesto, se tiene que hacer sSlo cuando el operador Io considera necesario para reposicionar la m&quina con et dispositivo embragado. No siegue en rev_s a menos que sea absolutamente necesario, USAF{ EL SISTEMA DE FUNCIONAMIENTO ATRAS Utilice el tractor solamente si est_ seguro de qua no ingresar&n niSos ni otras personas o animales al #,raa deride se va a cortar el c6sped. 1. Presionar et pedal embragueifreno basra el rondo y mantenerlo apretado. 2. Con el motor en marcha, girar la Ilave del interrupter de Ia ignici6n en e[ sentido inverse al de tas agujas del reloj hasta la posici6n "ON". 3. Mire hacia abajo y hacia atr&s no s6Io antes de ir marcha atr&s, sine mientras est_ yendo marcha atr&s. 4, Mover la palanca del cambio en la posici6n atr&s (R) y seltar despacio el pedal deI embragueifreno para empezar el movimienta. 5. Cuando el usa del ROSes mAs necesario, d_ vuetta a la Itave de ignici6n en el sentido de los agujas del reloj hasta la posici6n "ON". Posici6n RQS "ON" Motor en posici6n "ON" PARA OPERAR EN CERROS _ADVERTENCIA: No maneje hacia arriba o hacia abajo en tetras con pendientes superiores a 15° y no maneje atravesando ninguna pendiente. Utilice ta guia de la pendiente proporeionada en la porte posteriora de este manual. • Escoja Ia velocidad m&s lento antes de arrancar hacia arriba o hacia abajo en cerros. • Evite parar o cambiar la velocidad en tetras. • Si es absolutamente necesario el parar, empuje et pedal del embrague/freno r&pidamente a la posici6n de freno y enganche el frano de estacionamiento. • Mueva Ia palanca de cambio a primera. Aseg_rese qua ha dejado suficiente lugar para que el tractor pueda radar un pace cuando vuelva a empezar ei movimiento. • Para volver a empezar el movimiento, suelte lentamente el frano de estacionamiento y el pedal del embrague]freno. • Gire siempre lentamente. 51 PARA TRANSPORTAR • Levante la palanca de levantamiento del accesorio a su pesici6n m&s alto. • Cuando empuje o arrastre su tractor asegt3rese que fa palanca de cambio est6 en la pesici6n neutro, • No empuje e arrastre le tractor a m&s de cinco (5) MPH. AVISO: Para proteger et cap6 contra el daEo cuando transporte su tractor en un cami6n o remolcador, aseg_rese qua el cap6 est_ cerrado y asegurado al tractor. Use los medias apropiados para amarrar el cap6 al tractor (cuerdas, cordefes, etc.). REMOLQUE DE CARRETILLAS O OTROS ACCESORIOS Remolque solamente los accesorios recomendados y especificados par el fabricante del tractor, Use sentido comSn cuado este rernolcando. Las cargas pesadas, cuando este yendo sabre una pendiente, son peligrosas, las Ilantas pueden perder su tracci6n con et terreno y pueden ocasionar que pierda el control de su tractor. MECANISMO DE AVISO DE SERVIC10 1 CRON6METRO El mecanismo de aviso de servicio muestra el nt_mero total de heros qua ha estado en funcionamiento el motor, y se enciende y se apaga de manera intermitente cuando el motor o Ia cortadora necesitan servicio. Cuando se requiere servicio, el mecanismo de aviso de servic[o se enciende y se apaga intermitentemente par un lapse de dos heros. Para hacerles el servicio al motor y a la cortadora, lea el capitulo de Mantenimiento de este manual. NOTA: El dispositivo de arise de servicio funciona cuando la Ilave de ignici6n o arranque se encuentra en cualquier posici6nmanes en "STOP" ("PARE"). A fin de garantizar la precisiSn de ta lectura, asegt3rese de que et arranque permanezca en la posici6n "STOP" cuando el motor est_ apagado. ANTES DE HACER ARRANCAR EL MOTOR REVISE EL NIVEL DE ACEITE DEL MOTOR El motor en su tractor ha side enviado desde la fdbriea (lenacon aceite de calidad para verona. 1. Revise el aceite del motor con el tractor en terreno ntvelado. 2. Destornille y rernueva la tapai_arilla indicadora de nivel de relleno de aceite, limpie el aceite, Vuelva a insertar la varilla indicadora de nivel en el tuba, y haga descansar la tapa del relleno dot aceite en ettuba+ No enrosque latapa en el tuba. Remueva y lea el nivel del aceite. Si es necesario, agregue aceite hasta se llegue a la marco de tleno (FULL) en la varilla indicadorade niveL No lo tlene demasiado. - Para la operaci6n en clima frlo, debe cambiar el aceite para poder arrancar m&s f_.cilmente (Vea 'q'abla de Viscosidad Del Aceite" en la secci6n de Mantenimento de este manual), • Para cambiar ei aceite del motor, yea la secci6n de Mantenimiento en este manual, AGREGUE GASOLINA - Llene el estanque de combustible, Llene haste [a parte inferior del cuello de relleno deI estanque de gasoline. No Io Ilene demasiedo. Use gasoline regular, sin p!omo, nueva y limpie con el minimo de 87 octanes, (Et use de gasolina con plomo aumentar& los dep6sitos de 6xido de plomo y carbono y se reducir& la dureci6n de Ia v&lvula), No mezcle el aceite con ]a gasoline. Para asegurar que la gasoifna utilizada sea fresca compre estanques los cua[es puedan ser utilizados durante los primeros 30 dies. _kPRECAUCI6N: Limpie et aceite o el combustible derramado, No almacene, derrame o use gasolina cerca de una llama expuesta, IMPORTANTE: Cuando se opere en temperatures per debejo de 32=F (0°C) use gasoline de invierno Iimpia y nueva para auedar a asegurar un buen arranque en clima frio. PRECAUCION: Combustibles mezclados con alcohol (conocidos come gasohol, o el use de etano] o metanol) pueden ati-aer la humedad, ]a que conduce a Ia separaci6n y formaci6n de _,cidos durante el almacenamiento. La gasoline acidica puede da_ar el sistema del combustible de un motor durante el almaoenamiento, Pare evitar los problemas con el motor, se debe vaciar el sistema de combustible antes de guardarlo per un periodo de 30 dlas o m_.s. Vacle el estanque de combustible, haga arrancar el motor y h&gelo funcionar haste que las lineas del combustible y el carburador queden vacios. La pr6xima tampomda use combustible nuevo. Yea las Instrucciones pare el Almacenamiento pare m&s informaci6n, Nunca use productos de limpieza pare el motor o para el carburador en el estanque deI combustible pues se pueden producir dar_ospermanentes. PARA OPERAR DE LA VALVULA DE GASOLINA DE RESERVA 1. Levantan el as{ento per acceso a valvula de gasoline de reserva, 2. Per operaci6n normal, Valvula esta deberia en posici6n "Primario" (segSn se muestra). 3. Si el tractor esta sin gasoline, mueva Ia manija de valvula a posici6n "Reserve". 4. Conduzca el tractor y consiga m&s gasoline. 5. Despu_s de reabastecimiento de gasoline, mueva la manija de valvula a posici6n "Primario", Valvula De Gasolina De Reserve @ Primario 52 PARA HACER ARRANCAR EL MOTOR AI hecer arrencar el motor per le primera vez o si se ha acabado el combustible del motor, se necesitar_.tiempo pare el arranque extra pare mover el combustible desde el estanque hasta el motor. 1. Si@ntase en el sillSn en Ia posici6n de operaci6n, suelte el pedal deI embrague/ freno y ponga el freno de estacionamiento. 2. Ponge la pafenca de cambio en la posici6n de neutro. 3. Mueva el embrague del accesorio ala posici6n desenganchado disengaged, 4. Mueva et control de la aceleraci6n a la posici6n de rapido, 5. Tire el control de estrangulaci6n ala posici6n de estrangulaci6n pare el arranque de un motor frio. Para el arrancar un motor caliente el use del control de la estrangulaci6n puede que no sea necesario. AVISO: Antes de arrancar, lee las instrucciones siguientes pare el arranque en clima frio y templado. 6. Inserte la l[ave en Ia ignici6n y gire la llave en el sentido que giran las manillas del reloj ala pos[ci6n de arranque start, y suelte ta Ilave tan pronto come arranque el motor, No haga funcionar el errencador continuamente per m&s de quince segundos per minute. Si el motor no arranca despu_s de varies intentarlos, mueve el control de Ia estrangu]aci6n hacie adentro, espere unoscuantos minutes y trate de nuevo. S[ el motor sigue sin funcionar, estire del control de la estrangulaci6n y trate de nuevo. ARRANQUE CON TIEMPO TEMPLADO (50°F/t 0 ° CY MAS) 7. Cuando arranque el motor, empuje el control de la estrengulaci6n haste que el motor empiece a funcioner m&s suavemente. Si el motor empieza a funcionar maI, estire det control de Ia estrangulaci6n un poco per unos cuantos segundos y entonces continu@ a empujar Ientamente el control. • Los eccesorios y el embrague de suelo ahora puede ser utilizados, Si el motor no acepta esta carga, vuelva a arrancar el motor pare permitirle que se caliente per un minute, utilizando el estrangulador come .describido arribe. ARRANQUE CON TIEMPO FRIO(50°Fit0°C Y MENOS) 7. Cuando arranque el motor, empuje [entamonte el control de la estrangufaci6n hacia adentro haste que el motor empiece a funcionar suavemente, Siga empuj#.ndolo poco a poco permitiendo que el motor acepte pequefios cembios de velocidad y carga, haste que este completamente hecia edentro. Si el motor empieza a funcionar mal, estire del control de le estrangu[aci6n un poco per unes cuantos segundos y continL_ea empujar el control hacia adentro, Esto puede requerir que el motor se caliente per unos cuantos minutes, depende de [a temperature. • Los accesorios pueden ser utilizados durante el periodo del recalentamiento de1 motor y pueden requerir que et control de la estrangutaci6n sea estirado un poco. AVISO: SI se encuentra a mucha altura (sobre 3000 pies) o en clima frio (por debajo de 32°F [0°C]), Ia mezcla deI combustible del carburador debe ser ajustada para el mejor rendimiento del motor. (Vea "PARA AJUSTAR EL CARBURADOR" en la secci6n de Servicio y Ajustes de este manual). CONSEJOS PARA SEGAR • No se pueden usarlas cadenas para las [lantas cuando Ia caja de ta segadora est& adjunta al tractor. * La segadora debe estar nivetada en forma adecuada para obtener et mejor rendimiento al segar. Vea "PARA NIVELAR LA CAJA DE LA SEGADORA_' en la secci6n de ServLcio y Ajustes de este manual. ° El lado izquierdo de la segadora se debe usar para recorte. • Maneje de modo que los recortes se descarguen en el &rea que ya ha sido cortada, Mantenga el &rea de corte a Ia derecha del tractor. Esto producir_, una distribuci6n m_s pareja de los recortes y un code m&s uniforme. , AI segar las &rea grandes, empiece girando a la derecha de modo que los recortes se descarguen, alej&ndose de los arbustos, cercos, entradas de autom6viles, etc. Despu_s de una o dos vueltas, siegue en la direcci6n opuesta, haciendo virajes a la izquierda, hasta que termine. J • Si el c6sped est,. demasiado alto, se debe segar dos veces para reducir [a carga y los posibles peligros de incendio debido a Ios recortes secos. Haga el primer torte relativamente alto; el segundo a Ia aitura deseada. • No siegue el c6sped cuando est& mojado, El c6sped mojado taponar_, la segadora y dejar& montonesindeseabies. Permitaque se seque el c6sped antes de segarlo. ° Siempre opere el motor con una aceleraci6n completa cuando siegue para asegurarse de conseguir un mejor rendimiento y una descarga apropiada de los materiales. Regule fa velocidad de recorrido seleccionando un cambioIo suficientemente bajopara obtener un rendimiento de corte de parte de su segadora y tarnbi_n la cal[dad del corte deseada. 53 Guando opere con accesorios, seleccione una velocidad de recorrido que se acomode a{ terreno y ]e perrnitaobtener el mejor rendim!ento del accesorio que se est_ usando. PROGRAMA MANTEN|MIENTO DE ANTES DE CA_)AUSO i _wisarlaope_ci_n d_IIrene If Rev_sa_ t_ pre_[6nd_las _lanms I/ V_t_ll_zla _mmande }a b;_terJa CADA S0 HO_AS CA_V_ loo i FIO_J_S CADA TE_PO_[_ ALU._AMB_ if d RO_; Af_ar]camb_{la=_uchil{asdela_g Limpiat CADA 25 HORA_ de pr_se_c_ d_oD_ r&teu t el _ sL_le_a CT CAOA a HORi_S u l y los _ aOOt_ ....... _a te#mirta[as V Revis_ e[ _rlfrlamiento deI trans_ _ _ .................. _, ............... Umple I1_ ,_a_idLzos_e la._,!,_ca,de dirsc;ibr_, Jas#e_ciea# [_s c_rea._ {tapez_k_=tes Revisa_ el nk, ei del aceRe tlel molor ii . , if i,,,,,,,,,,, , V' ........ 3_mbiar el _.;ei_e d_l ra_lot (con f_t{o} _1,_ Carablar eI _,ceita eel motto" (,_inill{to) L[mplar el fi[t_e de aire _2 T Limpiar _2 0 _nspec.cion_r a f_ reji_Iz= de aim 8m_igu_lor Limpi_r 3ara_ Camt_iat eI _tl_ r_t_tod If _!,2 ............ ' de ch_spaz [a_ al_ta_ al ¢.attucho de e ntri_mienI_ r_e pap_ des i_ll re _e aJt_ V#2 el lUCre do ce_btlstible _1_ RECOMENDACIONES GENERALES La garant{a de este tractor no cubre los artlculos que ha° estado sujetos al abuse o a la negligencia del operador, Para recibir todo el valor de la garantia, et operador tiene que mantener Ia segadora seg_n las instruccionesdescritas en este manual. Hay algunos ajustes que se tienen que hacer en forma periddica para poder mantener su t_actor adecuadamente. AI menos una vez cada estaci6n comprobar si es necesario efectuar los adjustes descritos en las secciones de Sei_xicio y Ajustes de este manual • Una vez al aSo, cambie la buj{a, limpie o cambie el filtro de aire y revise si las cuchillas y tas correas est_n desgastadas. Una bujia nueva y un filtro de aire limpio aseguran una mezcla de aire-combustible adecuada y Ie ayudan a que su motor funcione mejor y que dure m_s. ANTES DE CADA use 1. Revise el niveI deI aceite del motor. 2. Revise [a operacibn de los frenos. 3. Revise la presi6n de las }lantas. 4. Verifique que el sistema de presencia del operado y ROS funcionen adecuatamente. 5. Revise si hay sujetadores sueltos. TASLA DE LUBRICACION _ (_ Acceso#o-_--Tf articuladodel volant !,_(T) Accesorio I \ deGr_del 13"lit 1 \ lr'_ Arbo, ..-,,,, -.. ,,-,.J/__q ,, _ / _ _ _, _.,_ !_ 'J) Accesoffo . I %._, "_-_ __ de Grasa del ..... 4; I_._-'-_'_::L Hoaam_emo ae _ T.7-_,_" - - H"_ ( _eGr_a delArboI "_ Accesorio de Grasadel R&_relentode la Rueda ,L%3,aotor Y2 h _"_ _I'_ Motor (_) Ptancha/ i'_ _ delengranaj_=-_..=l de Sectorde J I I _--_--_-_" "-,1 J ctet I (_Accesorio O Grasade propositogeneral (_) Refi_rasealasecci_ndeI"MOTOR"enMantenimiento IMPORTANTE: No aceite o engrase los puntos pivotes, los que tienen rodamientos de nil6n especiales. Los lubricantes viscosos atraer,_n polvo y mugre, Io que acortara la duracidn de los rodamientos. Si tree que lubricarse, use soiamente un [ubricante tipo grafito de polvo seco en forma moderada. 54 TRACTOR Siempre observe las reglas de seguridad cuando d6 mantenimiento. OPERACION DEL FRENO Si el tractor necesita m_s de cinco (5) pies para detenerse a la m_Lximavelocidad al cambio m&s alto en una superficie nivelada, de hormig6n o pavimentada, hayque hacerle el servicioal freno. Vet "PARA VERIFICAR St FUNCIONA BIEN EL FRENO" en el capitulo de Servicio y ajustes de este manual. LLANTAS * Mantengatodos los neum&t[coscon Iapresi6n de aire adecuada (Ver Ia PSI qua se indica en estos). . Mantenga las Ilantas sin gaso[ina, aceite o substancias quimicas para control de insectos qua pueden dahar la goma. . Evite los tocones, las piedras, Ias grietas profundas, los objetosafilados y otrospeligros que pueden dar_ar a tas Ilantas. AMISO: Para arreglar Ias Ilantas perforadas y p_ra prevenir que tenga Ilantas pinehadas a causa de pequeSas fugas, puede comprar el so|repara llantas de su comerciante de partes de repuesto m_.s cercano. Etsello previene qua Ias llantas se sequen y tambi_n la corrosi6n, StSTEMA PRESENOIA OPERADOR Y SISTEMA FUNCIONAMIENTO ATR.&S IRES) Asegurarse de que el sistema de presencia del operador, el sistema de trabajo y el sistema funcionamiento atr&s funcionen bien. Si tu tractor no funci6n come descrito, reparar el problema inmediatamente. , El motor no arrancar& si el pedal de embrague/freno est& completamente presionado y el mando del embrague deI accesorio est& desconectado: VI_RIFlC:Z SISTEMA PRESENCIA OPERADOR Cuando e! motor est,. en marcha, cuatquier tentativa del operador de abandonar el asiento sin haber puesto el freno de estacionamiento pdmero, apagar& el motor. . Cuando el motor estz_en marcha y el embrague del accesorio est& conectado, cualquier tentativa del operador de abandonar el asiento, apagar_, el motor. . El embrague del accesorio notendrla que funcionar nunca si el operador no est,. en su asiento. • Cuando el motor est_ en marcha con el interrupter de Ilave del sistema de funcionamiento atr&s (ROS) en la posici6n "ON" y el embrague del accesorio conectado, cualquier tentaflva del operador de viajar marcha atr&s, NO apagar-& el motor, CUIDADO DE LA OUOHtLLA Para obtener result_dos 6ptimos, fas cuchillasde la certadora deben estar afiladas. Reemplace las cuchiliasque este_ n gastadas,dobladas o dar_adas. ,I_PRECAUCION: Usar solamente la hojas de repuesto aprobada per el fabricante de su cortac_sped. Usar una hoja no aprobada per el fabricante de su cortac6sped es peligroso,puede da_ar su cortac_sped y anular su garant[a. REMOCION DE LA CUCHILLA I. Levante la segadora a su posici6n m&s alta para permItir el acceso alas cuchillas. AVISO: Proteja sus manes con guantes y/o envuelva la cuchiliacon una tela gruesa. 2. Remuevael pernode lacuchilladandole vueltas en el sentido inverse al de/as agujas _1 reloj. 3. lnstale ta nueva cuchilla o cuchillaafilada con el estampado 'THIS SIDE UP" en la dfreccion de la segadora y del conjunto del mandril. IMPORTANTE: Para asegurar la instalacion a#ropiada, posicione el agujero central de la cuchilla con la estrella del conjunto del mandril. 4, tnstale y apriete eI pemo de la cuchilla firmemente (Par 45-55 piesfiibras/62-75 Nm). IMPORTANTE: El perno de la cuchllla es tratado a calo. Si es necessario sustituir los pernos, sustituirlos sSlo con pernosaprobados mostrados en Partes de Reparacibn. Conjuntodot Cuchilla Mandril / A0,,ioro A , Posioi6n ROS "ON" Motor en posic_bn "ON" (Operaci6n Normal) Vl_ RIFII_ZSIST EMA FUNOlO NAMlENTO ATR._S ires) * Cuando el motor estA en marcha con el inteo rruptor de tlave en posici6n de motor "ON" y el embrague del accesorio conectado, cualquier tentativa del operador de viajar marcha atr&s, apagar& el motor. __ Estrella Pernode la Cuchilla BATER|A Su tractor cuenta con un sistema de carga de la bateria que es suficientepara el use normal. Sin embargo, si se carga la batefia peri6dicamente, con un cargador de autom6viles, se prolongard su duraci6n. • Mantenga la bateria y los terminales limpios. • Mantenga los pemos de la bater_a apretados, • Mantenga los agujeros de ventilaci6n pequefios abiertos. . Vuelva a cargar de 6-10 amperes per 1 hera, AVISO: La bateria del equipo original de su tractor no becesita, servicio. No intente abrir o remover las tapas o cubiertas. No esnecesario aSadir o veriflcar e[ nivel del electr61ito. 55 PARA LIMPIAR LA BATE'RIA Y LOS TERMINALES La corrosi6n y la mugre de Ia bateda y de lot terminaWespueden producir "escapes" de potencia en Ia bateda. 1. Remueva la protecci6n de los terminales. 2. Desconecte el cabEe de la bater_a NEGRO primero y luego el cable de la bateria ROJO y remueva Ia bateria del tractor. 3. Enjuague la bateria con agua corriente y s6quela. 4. Umpie los terminales y los extremes del cable de la bateria con un cepillo de alambre hasta que queden brillantes. 5. Cubra lot terminales con grasa o parafina. 6. Reinstale la bateria (Vea "Reemplazar la Bateria" en Ia secci6n de Servicio y ajustes de este manual). ENFRIAMIENTO DEL TRANSF:JE Mantenga el transeje sin acumulaci6n de mugre o paja que puede restringir el enfriamfento. PARA CAMBIAR EL ACEITE DEL MOTOR Determine Ia gama de la temperatura esperada antes de cambiar el aceite. Todo et aceite debe cumplir con laclasificaci6n de servicio API SG-SL. , Asegt_rese que el tractor est@en una superficie nivelada. • El aceite se drenar& mas fAcilmente cuando est_ caliente. • Recoja el aceite en un envase adecuado. 1. Remueva la tapa[varilla indicadora de nivel para relleno del aceite. Tenga cuidado de no permitir que la mugre entre en el motor cuando cambie el aceite. 2. Quite el casquillo amarillo de la parte inferior de Ia v&lvula de desag_Jee instale el tube de desagOe sobre la guarnici6n. 3. Abra Ia vAIvula de desag0e empujando hacia dentro y dando vuelta a la izquierda. VAIvula de desagL]e dei ace_te No trate de timpiar el ventilador o la transmisi6n cuando el motor est6 funcionando o mientras Ia transmisi6n est@caliente. J _Tu CORREAS V Revise las correas V para verificar si existe deterioro y desgaste despu6s de 100 horas de operacion y c&mbielas si es necesario. Las correas no son ajustables. Cambie las cerreas si empiezan a deslizarse debido al desgaste. MOTOR LUBRICACI6N Use solamente aceitede detergente dealta calidad clasiflcado con la clasificaci6n SG-SL de servicio APL Seleccione la calidad de viscosidaddel aceite SAE seg[in su temperatura de operaciSnesperada, CAUDADES OE V_SCOSIDAD Casqudlo--'__L_ 4. 5. DE SAE 6. 7. Cambie el aceite despu@s de 50 horas de operaci6n o per Io menos una vez al abe si el tractor se utitiza menos 50 horas el aSo. Revise et nivel del aceite del carter antes de arrancar et motor y despu6s de carla echo (8) horas de use continuado. 8. Para abrirse, tire hacia fuera la v_lvula de desagL_e. Despu_s de que el aceite haya drenado totalmente, cerrar y bloquee la v&Ivula de desagOe ernpujando hacia dentro y dando vuelta en sentido de las agujas de un reloj hasta que Ia clavija est,. en ia posici6n bloqueada seg6n Io mostrado. Remueva el tube de desag_e y substituya el casquillo sobre la guarnici6n inferiorde la vAIvula de desagL_e. Vuelva a Ilenar e] motor con aceite a trav6s del tube de la varilla indicadora de nivei para re]leno del aceite. Vaclelo lentamente. No Io llene demasiado. Para la capacidad aproximada yea fas "Especificaciones deI Producto" secci6n de este manual. Use un medidor en ia tapa/variIIa indicadora del nivel para reUenodel aceite para revisar el niveL Inserte la varilJa indicadora de nivel en el tube, y haga descansar Ia tapa del dep6sito para relteno deI aceite en el tube al leer las medidas. No enrosque el tap6n cuando este tomando una lectura. Mantenga el hive{ del aceite en Ia marca de lteno (FULL) en la varilla indicadora de niveL Apriete latapa en el tube en forma segura cuando termine. FILTRO DE ACEITE DEL MOTOR Cambie el filtro de aceite del motor cada temporada ovez per medio que cambie el aceite, si el tractor se usa m,_s de 100 horas en un aSo. 56 LIMPIEZA DE LA ENTRADA DE AIRE!AREAS DE ENFRIAMENTO Para asegurar un enfriamiento adecuado, aseg_rese que la rejilta det c_sped, las aletas de enfriamiento, y otras superficies externas de[ motor se mantengan limpias en todo momento. Cada 100 horas de operaci6n (m&s a menudo bajo condiciones extremadamente polvorosas o sucias), remueva la caja del ventiiador y ot_as tapas de enfriamiento. Limpie las aletas de enfriamiento y las superficies externas, seg_n sea necesario. Aseg_rese que se vuelvan a instafar Ias tapas de enfriamiento, AVlSO: Si se opera Ia m_.quina con una rejilla del c_sped bloqueada, sucia, o con las aletas de enfdamiento taponadas, y/o las tapas de enfriamfento removidas se producir& daSo en et motor debido aI calentamiento excesivo. SILENCIADOR Inspeccione y cambie e] silenciador corrofdo y el amortiguador de ehispas (si viene equipado) pues pueden crear un peligrode incendioy/o dafios. BUJIA(S) Cambie las bujla(s) aI comienzo de eada temporada de siega o despu_s de cada 100 horas de operaci6n, lo que suceda pdmero. El tipo de buj_a y el ajuste de la abertura aparecen en "ESPECtFICACIONES DEL PRODUCTO" secoi6n de este manual. FILTRO DE A]LRE Su motor no va a funcionar en forma adecuada s] usa un filtro sucio, tnspeccione el cartucho de pape] cada dos meses o despu_s de 25 horas de operaciSn, el cu_.I suceda primero. D@leservicio al filtro de aire m&s a menudo si se usa en condiciones polvorosas. Reemplace el cartucho de papei cada aSo, o despu_s de cada 100 horas de operaci6n, PARA DAR SERVICtO AL CARTUCHO o Cambie un cartucho que este sucio, doblado o daSado. Maneje el cartucho nuevo cufdadosamente; no Io ut{lice si et se[lo de goma esta daSado AVlSO: No lave el cartucho de papel o use aire a presiSn, pues esto daSar& el cartucho. 1. Abra la puerta (A) en la caja del ventilador para obtener acceso al etemento de filtro de aire (B). 2. Libere el cierre (C) y remueva el elemento. FILTRO DE COMBUSTIBLE EN LINEA E] filtrode combustible debe cambiarse una vez cada temporada. Si el filtro de combustible se tapona, obstcuyendoelflujo deI combustiblehacia el carburador, as necesario cambiarlo. 1. Con el motor frio, remueva el filtro y tapone Ias secciones de la Ifnea de combustible. 2. Ponga el filtro de combustible nuevo en su posici6n en la Ifnea de combustible con la flecha seSatando hacia e] carburador. 3. Aseg_rese de que no hayan fugas en la linea del combustible y que las grapas est_n colocadas en forma adecuada. 4. Inrnediatamente limpie toda la gasolina derramada. 3. Golpee ligeramente el elemento de papel para desalojar Ia suciedad. Abrazadera __\ 4. Limpie todos las partes del filtro de aire de cualquier suciedad o material acumulada, 5. Evite que cualquier suciedad entre en la abertura deI carburador. Instale el elemento Iimpiado o nuevo en la base y aseg6relo con el cierre. 6. Cierre con el picaporte Ia puerta. LIMPIEZA DE LA REJILLA DE AIRE La rejilla de aire debe mantenerse sin mugre y paja para evitar el daSo at motor debido aI sobre_ calentamiento. Limpielaconun cepillode alambre o con aire comprimido para remover Ia mugre y las fibras de goma secas, pegadas. 57 combustible Abrazadera __ LIMPIEZA 4, • Limpie todo material extraSo del motor, la bater(a el asiento, el pulido, etc • Limpie los desechos de Ia placa gu(a Los desechos pueden Jimitarel movimiento del e(e del pedal del#eno/embrague, Io que hat& que patine la correa y que se pierda la traccion AI_kPRECAUCI6N: Evite todos los puntos de enganche y tas piezas m6viles Eche hacia atr&s la abrazadera de cierre de( adaptador de Ia boquilla y empuje 6ste en el puerto de lavado de Ia cubierta en el extremo izquierdo de la cubierta de la segadora Suelte ]a abrazadera de c)erre para fijar e] adaptador en la boquilla Pue_o de Lavado Pedal Del .... _Embrague/Freno Placa De IMPORTANTE: Tire de la manguera para asegurarse de qua ]a conexi6n est& bien fija 5 6 PRECAUCION; PUNTOSDE ENGANCHE SISTEMADEDIRECCION, SALPICADERO, GUARDABARROS Y SEGADORANO MOSTRADOS • Mantenga las superficies pulidas y las ruedas sin derrames de gasolina, aceite, etc • Proteja las superficies pintadas con cera tipo automotdz N ° recomendamos qua se utiI(ce una manguera de jard(n o agua a presi6n para limpiar el tractor a no ser que el motor y la transmisi6n est@n cubiertos para protegerlos de] agua El agua en el motor y la transmisi6n acortan la vida 5til del tractor Utilizar aire compdmido o un soplador de hojas para remover hierba, hojas y basura del tractor y cortac6spedes Lleve el tractor a un ]ugar horizontal y despejado de su c@sped Io bastante cerca de una boca de riego como para que Ilegue la manguera del jardin 3 7 8 9 _b IMPORTANTE: Aseg_rese de que la boca de descarga de[ tractor est& orientada LEJOS de su casa, garaje, coches aparcados, etc Quite fa boca de ensacado o cubierta de mantillo si est#, acoplada 2 IMPORTANTE: Vuelva a comprobar la zona para asegurarse de que est& despejada Mueva el control deI embrague del aocesorio a laposici6n 'ENGANCHAR'L Mant6ngase en ta posici6n del operador con la cubierta de corte acoplada hasta que Ia cubierta est6 limpia Mueva elcontrol de] embrague del accesorio a ]a posici6n' DESENGANCHADO' Gire Iallave de encendido a ]a posici6n STOP para apagar el motor del tractor Cierre la llave del agua Tire hacia atr_ts Ia abrazadera de cierre del adaptador de la boquilla para desconectar el adaptador del puerto de lavado de la cubierta. 10 Lleve el tractor a una zona seca, preferentemente de cemento o pavimentada Mueva el control del embrague deI accesorio a la posici6n "ENGANCHAR" para quitar el exceso de agua y ayudar a qua se seque antes de guardar el tractor PUERTO DE LAVADO DE LA CUBIERTA La cubierta de su tractor est_ equipada con un puerto de lavado sobre Ia superficie que forma parte del sistema de lavado de la cubierta Se deberia utilizar cada vez qua se haya usado el tractor 1 Abra la Ilave def agua Desde la posici6n del operador deI tractor, vuelva a arrancar el motor y ponga la palanca de ace[erac(6n en la posici6n 'Fast" (r_pido) lavado est_ roteSio elnoaccesorio est,, Ud.dey ADVERTENCIA: otras personas estar_n expuestos a que la hoja les lance aquellos objetos con los que entre en contacto. ) * Sustituya inmediatamente el accesorio de lavado roto o q ue falta antes de volver a usar la segadora. . Tape todos los orificios de la segadora con pernos y tuercas de seguridad. Mueva el control deI embrague deI accesorio a la posici6n "DESENGANCHADO" ponga e] freno de estacionamiento y apague el motor Enrosque el adaptador de la boquilla (empaquetado con el manual del operador del tractor) en e] extremo de ta manguera del jardin 58 ADVERTENCIA:PARA EVITAR LESIONES SERIAS, ANTES DE DAR CUALQUIER SERVICIO O DE HACER AJUSTES: 1, Presione el pedal del ernbragueifreno completamente y aplique el freno de estacionamiento. 2. Ponga la palanca de carnbios en la posici6n de neutro. !3. Ponga el embrague del accesorio en la posici6ndesenganchado (DISENGAGED). _4 . Ponga Ia Ilave de ignici6n en ta posici6n de apagado (STOp) y rernu_vala. 5. Aseg_rese que las cuchiflas y que todas las partes movibles se hayan detenido cornpletamente. 6. Desconecte el alambre de la bujia y p6ngalo en donde no pueda entrar en contacto con _sta. PARA DESMONTAR LA CORTADORA DE CESPED 1. Suelte el ernbrague poni_ndoloen la posici6n "DISENGAGED" ("DESACTIVADO"). 2. Baje la palanca elevadora de rnontaje a la posici6n de m_s abajo. 3. Retire Ia barra de tensi6n de la correa (K) de _la barra de sujeci6n (L). PREOAUCION: La barra de tensi6n de la correa funciona a resorte. Suj_tela con fuerza y su_ltela despacio. 4. Retire la correa de la cortadora de la polea del embrague el6ctrico (M). 5. Desconecte Ia pieza de uni6n anterior (E) de Ia cortadora - retire el resorte de contenci6n y la arandela. 6. Por uno de los lados de la cortadora, desconecte el brazo de suspensi6n de la cortadora (A) deI chasis y la pieza de uni6n posterior ((3) de la barra posterior de lacortadora (D) - retire [os resortes de contencidn y las arandelas. 7. Por el otro lade de la cortadora, desconecte el brazo de suspensidn y Ia pieza de uni6n posterior, ,i_ PRECAUCION: Una vez que se desconecten las piezas de uni6n posteriores, la palanca etevadora funcionar& a resorte. Sujete con fuerza la palanca elevadora al cambiarla de posioi6n. 8. Por el lado derecho de la cortadora, desconecte Ia barra anti-balanceo (S) de la barra posterior derecha de ta cortadora (D) - retire el resorte de contenci6n y la arandela, y jale la cortadera hacia usted basra que la barra se salga del odficio de la barra. 9. Haga girar el volante del tractor todo 1oposible a la izquierda. lO.Deslice la cortadora por debajo del lado derecho del tractor, PARA INSTALAR LA SEGADORA Reafice el procedimiento descrito en "PARA INSTALAR L_, SEGADORA Y LA CORREA DE TRANSMISION" del capitulo de Armado de este manual. ® 59 PARA NIVELAR LA SEGADORA Aseg0rese de que los neum,_ticos est_n infladosa la PSI que se indica en estos. Si est_.n demasiado inflados o poco intiados, el c_sped no le quedar_, bien cortado, Io cual podr& tlevarlo a pensar que la SEGADORA no est& bien regulada. REGULACII_N VISUAL DE LADe A LADe 1. Si redes los neum&ticosestb.n correctamente inflados y el c_sped parece haber quedado cortado desparejo, determine qu_ Iado de la cortadora est,_ cortando m_.s at ras. NOTA: Seg0n Iodesee, puede subireI Iado m&s bajo o bajar el lade m&s afro de ta segadora. 2. Aborde etlado de Iacortadoraque quieraregular. 3. Con una llave inglesa de 3/4" e de calibre regu]able, haga girar hacia la izquierda Ia tuerca de ajuste de ]a pieza de union (A) para bajar la cortadora, o bien h&ga]a girar hacia la derecha para subida. NOTA: Cada vuelta compieta de la tuerca de ajuste hat& variar la altura de la cortadora aproximadamente 3/16". Haga tuerca ghacla Ia derecha Haga girar para subir la segadora izquierda tuerca En case que sea necesario realizar un ajuste, lea los pasos 2 y 3 de las instrucciones de Regulaci6n visual que aparecen m&s arriba. 5. Vuelva a verificar las medidas y ajuste nuevamente, en case necesario, hasta que ambos lades queden iguales. AJUSTE DE DELANTE A ATR/_S tMPORTANTE: El pJso debe quedar bien niveIado de lade a Iado. Para que el c_sped te quede perfectamente cortado, las cuchillas de lacor_adora deben ajustarse de tal manera que ia punta anterior quede 1/8" a 1/2" m_.s abajo que la punta posterior cuando Ia cortadora se encuentre en su posiciSn m&s afta. _tLCUIDADO: Las cuchillas son afiladas. Prot_iase las manes con guantes o envuelva las cuchi]tas con tela gruesa, o bien haga ambas cosas. • Suba ]a SEGADORA a la posici6n m&s alta. - Ubique cualquiera de las hojas de ta cuchilla de tal manera que la punta quede apuntando directamente hacia adelante. Mida Ia distancia (B) que hay entre la punta anterior y e] suelo y entre la punta posterior y el suelo. • Si la punta anterior de la hoja de la cuchilla no est,_ 1/8" a t/2" m_s abajo que Ia punta posterior, dirijase a Ia parte de adelante deI tractor. • Con una tlave inglesa de 11/16" o de calibre regulable, afloje la tuerca A, d&ndole varias vueltas para despejar la tuerca de ajuste B. • Con una Ilave inglesa de 3/4" o de calibre regulab]e, haga girar la tuerca de ajuste de Ia pieza de union anterior (B) en sentido horario (ajustar) para elevar la parte de adelante de la cortadora, o bien en sentido antihorario (aflojar) para bajarla. la hacia 4. la para _dora 4. Pruebe la regulaci6n realizada cortando c_sped que a0n no haya cortado y observando c6mo queda. Vuelva a ajustar, en case necesario, basta obtener resuitados satisfactorios. REGULACION DE LA PRECISION DE LADe A I_ADO 1. Con todos los neum_,ticos correctamente inflados, estacione el tractor a nivel del suelo o en Ia entrada a Ia casa. _,CUIDADO: Las cuchillas son afiladas. Prot_jase Ias manes con guantes o envuelva las cuchilIas con tela gruesa, o bien haga ambas cosas. 2. Suba la SEGADORA a la posici6n m&s alta. Ajuste la tuerca de regulaci6n de altura B papa levantar Ia segadora tuerca de regulaci6n de altura B para R _uerca A primero 3, A ambos lades de la cortadora, ubique la cuchilla hacia un lade y mida la distancia (A) que hay entre el borde inferior de la cuchilla y el suelo. Dicha distancia debe ser la misma a ambos lades. NOTA: Cada vuelta compieta de ]a tuerca de ajuste har& variar la altura de Ia cortadora 1/8". • Vuelva a verificar las medidas y ajuste nuevamonte, en case necesario, hasta que la punta anterior de la hoja de la cuchilla quede 118" a I/2" m&s abajo que Ia punta posterior. • Mantenga en la posici6n la tuerca de ajuste per medio de una Ilave inglesa, y apriete bien la tuerca contra dicha tuerca de ajuste. 6O PARA REEMPLAZAR LA CORREA DE LA CUCHILLA DE LA SEGADORA DESMONTAJE DE LA CORREA DE LA SEGADORA 1. Estacione el tractor en una superfic[e niveIada. Ponga el freno de mane. 2. Baje la palanca elevadora a la posici6n de m&s abajo. 3. Retire la barra de tensi6n de la correa (K) de la barra de sujeci6n (L). _.CUIDADO: DESMONTAJE DE LA CORREA 1. Desmonte la cortadora (Ver "PARA DESMONTAR LA CORTADOR._' en este capttutodeI manual). NOTA" Observe toda la correa de impu[si6n de movimiento y ta posici6n de todas las guias y dispositivos de protecci6n o guardaeorreas. 2. Desconecte elam_s detcable delembrague (A). 3. Quite la plaza de uni6n anti-rotaci6n (13)qua est& del lade derecho deI tractor. 4. Retire la correa del pifi6n estacionario (C) y del pifi6n del embrague (D). 5. Jale el cable de Ia correa hacia la parte de atr&s del tractor. Retire hacia arriba la correa desde la polea de entrada deI eje (F). 6. Retire hacia abajo la correa desde la polea de] motor, pas&ndolaalrededor deI embrague eI_ctrico (G). 7. Des]ice la correa hacia la parte de atr&s del tractor, retirela de la placa de direcci6n (H) y s__queladel tractor. MONTAJE DE LA CORREA 1. Para instalar la correa nueva, p#.seladesde la parte de atr&s a la parte de adelante del tractor per encima de la placa de direcei6n (H) y del v&stago del pedal de embrague / freno (J). 2. Jale la correa hacia la parte de adelante del tractor, y p&sela alrededor det embrague el6ctrico y per la polea de] motor (G). 3. Jale la correa hacia la parte de atr,_sdel tractor. Con mucho cuidado, h&gala descender pas&ndola alrededor de la polea de entrada del eje (F). Cerci6rese de que est6 dentro de] dispositivo de protecci6n o guardacorrea. 4. Pase Ia correa a trav6s deI pifi6n estacionario (C) y el pifi6n de embrague (D). 5. Vue]va a instatar la pieza de uni6n anti-rotaci6n (B) del [ado derecho del tractor. Ajfistela bien. 6. Vuelva a conectar el arn_s del embrague (A). 7. Asegfirese de que la correa calce en todas las ranuras de las poleas y dentro de las gufas y guardacorreas. 8. Monte Ia cortadora (Ver "PARA MONTAR LA CORTADOR_' en este capltulo del manual). La barra de tensi6n funciona a reserte. Suj_teia con fuerza y su_ltela despacio. 4. Quite los tornitlos (P)de las cubiertas derecha e izquierda y retlrelas (Q). 5. Quite toda suciedad y restos de hierbas que pueda haberse acumulado alrededor de los dispositivos de recolecci6n y de toda la superficie superior. 6. Retire la correa de Ia polea del embrague el_c-trico (M), las dos poleas de Jos dispositives de recolecci6n (R) y las poleas de los pifiones (S). MONTAJE DE LA CORREA DE LA SI=GADORA 1. Instale Ia correa pas&ndoia alrededor de las poleas (R) y alrededor de Ias poleas (S). come se muestra en Ia figura. 2. Pase Ia correa per encima de la polea del embrague el_ctflco (M). IMPORTANTE: Verffique qua la correa calce bien en todas las ranuras de tas poleas de la cortadom. 3. Vuelva a colocar las cubiertas derecha e izquierda (Q). Ajuste bien todos los tornillos. 4. Co]oque la barra de tensi6n de la correa (K) _en la barra de sujaci6n (L). CUIDADO: La barra de tensi6n funciona a resorte. Suj_tela con fuerza y p6nga]a despacio. 5. Suba la palanca elevadora a la posici6n de m&s arriba. PARA CAMBIAR LA CORREA IMPULSION DE MOVIMIENTO DE Estacione e! tractor en una supe_cie niveFada. Ponga el freno de mane. Si necesita asistencia, del lade de abajo deI apoyapi_s izquierdo hay una guia pr,_cticapara el montaje de la correa. 61 REGULAC|ON DE LA PALANCA DE VELOCIDADES NEUTRO DEL CAMBIO MEC/_NICO CON DIFERENCIAL Y TRACCION ANTERIOR El cambio mec&nico con diferencial y tracci6n anterior tiene que estar en posici6n neutro cuando {a relativa pa{anca est,. en posici6n(eierremet&lico, La regulacion ya est& predefinida por la Casa constructora, pero si es necesario efectuar m_.s reguiaciones, proceder de la siguiente manera: 1. Asegurarse que el cambio mec&nico con diferencia! y tracci6n anterior est6 en posici6n neutro. AVISO: Cuando las ruedas posteriores deI tractor se mueven tibremente, el cambio mec&nico est& en neutro. 2. Soltar el perno de regulaci6n en la parte anterior de la rueda po_erior derecha. 3. Colocarlapalancadeve[ocidadesenposici6n neutro, 4. Apretar a rondo el perno de regulaci6n, AVISO: Desplazar el piano de trabajo de Ia segadora hasta Ia posici6n m_,s baja para aumentar el juego al fin de acceder aI pemo de regulaci6n, Palanca deVelocidades NeutroCierre del Carnbio PARA REMOVER LAS RUEDAS PARA HACER REPARACIONES 1. Bloquee el eje en forma segura. 2. Remueva Ia cubierta de]eje, el anilro de retenci6n y las arande[as para permitir]a remoci6n de las ruedas (Ia rueda trasera contiene una Ilave cuadrada - no la pierda), Arandelas Anillo de Retenci6n Cubierta "\ del e' LlaveCt_adrada(rueda _._._ J trasera solamente) 3. Repare la lianta y vu61vafa a montar. AVISO: En las ruedas traseras solamente: alinee las ranuras en el cubo de la rueda trasera en el eje, Inserte ]a llave cuadrada. 4. Vuelvaa colocar las arandelas e inserte el anillo deretenci6n en formasegumen laranurade{eje, 5. Vuelva a colocar la cubierta de] eje. AVISO: Para arreglar las i]antas perforadas y p@ra prevenir que tenga Ilantas pinchadas a causa de pequefias fugas, comprar de su commerciante Sears y utilizar el sello para Ilantas. Elsello previene que {as llantas se sequen y tambi@n Ia corrosi6n. CONTROLAR Y AJUSTAR 1. Aparcar el tractor en una superficie nivelada de hormig6n seco o pavimentada, presionar el pedal deI freno hasta el rondo y accionar el freno de estacionamiento, 2. Ponga [a palanca de cambios en punto muerto. Las ruedas traseras tiene que bZoquearsey patinar cuando se intenta empujar hacia adelante el tractor manualmente, Si las ruedas traseras giran, es necesario ajustar el freno o sustituir las zapatas. PARA HACER ARRANCAR EL MOTOR CON UNA BATER{A BAJA _Iv_,DVERTENCIA: Las baterias de &cido-plomo generan gases expEosivos. Mantenga las chispas, Ias llamas y los materiales para fumar alejados de las baterias. Siempre use una protecci6n para los ojos alrededor de Ias baterias, Si su bateria est& demasiado baja como para hacer arrancar el motor tiene que volverse a cargar, (Vea "Bateria" en la secci6n de Mantenimiento de este manual), Si se usan "cables de empaEme" para un arranque de emergencia, siga este procedimiento: IMPORTANTE: Su tractor esta equipado con un sistema de 12 volts, El otro vehiculo tambi_n tiene que tener un sistema de 12 volts, No use labateria de sutractor para hacer arrancar a otros vehiculos. PARAADJUNTAR LOS CABLES DE EMPALME 1. Conecte cada extremo deI cable ROJO con el terminal (A-B) POSITIVO (+) de cada baterfa, preocup&ndose de no hacer cortocircuito en e] chasis, 2. Conecte un extremo deI cable NEGRO con el terminal (C) NEGATIVO (-) de una bateria compEetamente cargada. 3. Conecte el otto extremo d elcable (D) NEGRO con un buena CONEXION A TIERRA DEL CHASIS, alejado del estanque de combustible y de la bateria. PARA REMOVER LOS CABLES, tNVIERTA EL ORDEN t, El cable NEGRO primero del chasis y luego de Ia bateria completamente cargada. 2, El cable ROJO aI Ultimo de ambas baterias, Bateria D_bil o Dasc_gada 62 EL FRENO Si el tractor exige m&s de cinco {5) pies para pararse a una velocidad m&s alta en el cambio m&s alto en una superficie nivelada de hormigbn seco o pavimentada, entonces se debe controlar y ajustar el freno. CONTROL DEL FRENO Bateria Oompletamente Cargada REEMPLAZAR LA BATERIA _.DVERTENCIA: Nohaga cortocircuitoconlos terminales de la bateria al permitir que una llave de tuerca o cualquier otro objeto entre en contacto con ambos termJnales a Ia misma vez. Antes de instalar Ia bateria remueva las pulseras de metal, los relojes de pulsera de metal, los anillos, etc. El terminal positive tiene que coneetarse pdmero para evitar Ias chispas debido a la conexi6n a tierra par accidente. 1. Levantamos la _po_ a Ia posici6n Ievantada. 2. Remueve la protecei6n de los terminales. 3. Desconecte el cable de la bateria NEGRO primero y luego el cable de la bateria ROJO y remueva la bateda de] tractor, 4. Instale Ia nueva bateria con [as t_rminos en misma posici6n coma la bateria vieja. 5. 6. Reemplazamos cubierta terminal. Primero, conecte e] cable de la bateda ROJO con el terminal positive (+) con e[ perno hexagonal y la tuerca seg_n se muestra. Apri_telos en forma segura. 7. Conecte el cable de conexi6n a tierra NEGRO al terminal negative (-) con el perno hexagonal y Ia tuerca que queden. Apt[Steles en forma segura. 8. Cerramos la capota. ENTRECIERRE Y RELES El atambrado suelto o daSado puede producir el mal funcionamiento de su tractor, o que deje de funcionar,o Ie impida el arrancar • Revise el alambrado. PARA CAMBIAR EL FUSIBLE C_.mbielo par un fusible tipo enchufable de 30 amps, tipo automotdz. El sujetador del fusible est#, ubicado detr&s del tablero. PARA REMOVER EL CONJUNTO DEL CAPe Y DEL ENREJADO 1. Levante el cap6. 2. Desabroche el conector deI alambre de Ias luces delanteras, 3. P_.rese delante del tractor. Agarre el cap6 en los lades, inclinelo un pace hacia el motor y s&quefo del tractor. 4. Para volver a instalar el cap6, aseg0rese de volver a conectar el conector de] alambre de las [uees. I IMPRESION/INCLINACI6N DE LAS RUEDAS DELANTERAS La impresi6n e inclinaci6n de las ruedas de]anteras de su nuevo tractor vienen as¿de f&bdca y son normales. La impresi6n y la inc[inaci6nde las ruedas de]anteras no son regulables. En case que se produzca alg0n daSo que afecte la impresi6n o la inclinaci6n de las ruedas delanteras taI coma vinieron de f&briea, p6ngase en contacto con un centre de servicios Sears u otro centre de servicios autorizado. PARA CAMBIAR LA BOMBILLA DE LA LUZ DELANTERA t. Levante ef cap5. 2. Tire el sujetador de la bombilla fuera deI agujero en la parte trasera del enrejado. 3. Cambie la bombitla en el sujetador y empuje el sujetador de la bombilla, en forma segura, hacia atr__sen el agujero en la parte trasera dei enrejado. 4. Cierre el cap6. Oonector de]las Luces alambre de Delanteras MOTOR El mantenimiento, la reparaci6n, o el reemplazo de cualquier dispositivos o sistemas deI control de Ia emisiSn, los cuales sean hechos al costa del cliente, pueden ser realizados par cualquier individuo o establecimientode reparaci6n de metar. Losreparosque caen bajo garantia deben ser rea]izados par un establecimiento de serviciode reparaci6n de motor autorizado. CARBURADOR Si su motor no opera adecuadamente debido a problemas sospechados de carburador, ileve usted sutractor a un centre de servieioautorizado para su reparaciSn y!o ajuste. El tope de alta ve[ocidad ha side ajustado en la f&brica. No Io ajuste - se pueden producirdaSos. IMPORTANTE: Nunca manipu]e el regulador del motor, el que ha side ajustado en la f&brica para la ve]ocidaddel motor adecuada. Puede ser peligrosa hacer funcionarel motora una velocidad par sabre el ajuste de alta ve]ocidadde la f_,brica.SJ cree que la velocidad alta regulada alta regulada del motor necesita ajuste, pongase en contacto con un centre de servicio Sears o con un otto centre de serviciocualificado, el que cuenta con el equipo adecuado y la experiencia para hacer los ajustes necesarios. 63 Inmediatamente prepare su tractor para el almacenamiento al final de la temporada o si el tractor no se va a usar pot 30 dias o m&s. _IhADVERTENOIA: Nunca almacene el tractor con gasolina en el estanque dentro de un edificio en donde los gases pueden alcanzar una llama expuesta o una chispa. Permita que el motor se enfrie antes de almacenarlo en cualquier recinto privado. TRACTOR Remueva la segadora del tractor para el almacenamiento por el invierno. Cuando la segadora se va a almacenar pot cierto periodo de tiempo, limpiela cuidadosamente, quite toda Ia mugre, la grasa, las hojas, etc. Gu,_rdela en una &rea Iimpia y seca. 1. Limpie todo el tractor (vea "LIMPIEZ_' en la secci6n de Mantenimiento en este manual). 2. Inspeccione y cambie Ias correas, si es necesario (yea Ias instrucciones para el cambio de las correas en Ia secci6n de Servicio y Ajustes de este manual). 3. Lubdquelo, seg_n se muestra en la secci6n de Mantenimiento de este manual. 4. Aseg_rese que todas las tuercas, tes pernos y los tornillos est6n sujetados en forrna segura. fnspeccione Ias partes movibIes para verificar si hay daSo, rotura o desgaste. CAmbielas si es necesario. 5. Retoque todas superficies pintadas oxidadas o picadas; aplique lija antes de pintar. BATERiA • Cargue Ia bateda completamente antes de guardarla. • Despu@s de cierto periodo de tiempo en alrnacenamiento, Ia bater[a puede necesitar volver a cargarse. • Para ayudar a evitar la corrosi6n y las fugas de potencia durante largos periodos de almacenarniento, se deben clesconectar los cables de la bateda y se debe limpiar cuidadosamente (vea "PARA LIMPIAR LA BATERIA Y LOS TERM]NALES" en la secci6n de Mantem imiento de este manual). • Despu_s de Iimpiarla, deje los cables desconectados y p6ngalos en donde no puedan entrar en contacto con los terrninales de la bateria. • Si se remueve la bateria deI tractor para e] almacenamiento, no la guarde directamente sobre concrete o sobre superficies h[1medas. MOTOR SISTEMA DE COMBUSTIBLE IMPORTANTE: Es important evitar que se forman depositos de goma en partes fundamentales del sistema de cornbus-tible tales como el carburador, el filtro de1 combustible, la manguera deI combustibles mezclados con alcohol (conocido como gasohol o que tienen etanol o metanol) pueden atraer humedad, Io 64 que conduce a la separaci6n y a la formaeiSn de acudos durante elalmacenanliento. La gasoIina acidica puede daSar el sistema de combustible de un motor durante el periodo de almacenamiento. • Vaciar el dep6sito deI carburante poniendoen marcha el motor ydej&ndotofuncionar hasta que el carburante term ine el carburador estL•vac_o. • Nunca use los productos para Iimpieza del carburador odel motor en el estanque de combustible pues se pueden producir da_,os permanentes. • Use combustible nuevo ia pr6xima ternporada, AVISO: El estabilizador de combustible es una alternativa aceptabIe para reducir a un minimo la forrnacibn de dep6sitos de goma en el combustible durante el periodo de almacenamiento. Agregue estabilizador a la gasolina en el estanque de combustible o en el envase para el almacenarniento. Siernpre siga Ia proporci6nde mezcla que se encuentra en el envase de] estabiIizador. Haga funcionar el motor por Io menos 10 minutos despu@sde agregar el estabilizador, para permit_rque _ste Ilegue a[ carburador. No vaciar la gasolina del estanque de gasolina y el carburador si se est_ usando estabilizador de combustible. ACEITE DEL MOTOR Drene eJaceite (con el motor caliente) y c&mbie]o con aceite de motor lirnpie. (Vea "MOTOR" en la secci6n de Mantenimiento" de este manual.) CILINDRO(S) 1. Remueva la(s) bujia(s). 2. Vac_e una onza de aceite a trav@s del agujero(s) de la bujia en el cilindro(s). 3. Gire la Ilave de ignici6na la posici6n de 'mrranque" (Start), por unos cuantos segundos para distdbuir el aceite. 4. Cambie pot bujia(s) nueva(s). OTROS • No guarde la gasolina de unatemporada ala otra. • Cambie el envase de la gasolina si se empieza a oxidar. La oxidaci6n y/o la mugre en su gasoline producir&n problemas. • Si es posible, guarde su unidad en un recinto cerrado y c_brala para protegerla contra el polvo y la mugre. • Cubra su unidad con un forro protector adecuado que no retenga Ia humedad. No use pl_stico. El pl#.stico no puede respirar, Io que perrnite Ia formaci6n de condensaci6n, Io que producir_,la oxidact6n de su unidad. IMPORTANTE: Nunca eubra el tractor mientras el motor y Ias areas de escape todavia estan calientes. IDENTIFICACION DE PROBLEMAS: Vea la secciSn PROBLEMA No arranca apropiada en el manual a menos qua est6 dirigido a un centre de servicio Sears. CORRECCI(_N CAUSA 1, Sin combustible. 2. Motor sin la"ESTRANGULACION" (CHOKE) adecuada. 3. Motor ahogado, t. 2. 3. Uene el estanque de combustible_ Vea"PAPA HACER ARRANCAR EL MOTOR" en la seeciSn de operaciSn, Espere varies minutes antes detratar de affancar. 4. s. 6. 7. Buj[a Filtro Filtro Ague e. Alambrado suelto o dafiado. 8, Revise rode el alambrado. 9. Carburador desajustado. 9. Vea =PARAAJUSTAR EL CARBURADOR" en la secci6n de Servicio y Ajustes. lo, male. de aire suc[o. de combustible sucio. en el combustible. Cambie la bujia. Limpie/cambie el filtro de aire. Cambie el fiftro de combustible. Vaoiar el estanque de combustible y el carburador, vuelva a Ilenar el estanque con gasolina nueva cambie el fiftro de combustible. 4. 5. s. 7. V&Ivulas del motor desajustadas. lO. Pon_ase en contacto con un centre de serv=ciocual_cado "SEARS". ,, ,,,,,, Diflcit de arrancar t, ..... Filtro de aire sucio. 1, 2. Bujia ma[a. 2. Cambie la buj{a, 3, 4. Baterla baia 0 descargada. Fntro de combustible susie. 3. 4. Vuelva a cargar o ca_-nbie [a bsteria, Cambie eI filtto de combustible. 5. Combustible rancio 0 sucio. 5, Vaciar elestanque de combustible y vuelva a Ilenado con gasoline nueva. 6. Atambrado suelto o daSado, 6. Revise todo el alambrado. 7. Carburador desajustado. 7. Vea"PARAAJUSTAR ELCARBURADOR" en la secciSnde Servicioy Ajustes. 8, V_lvulas deI motor dssajustadas. 8. Pongase en contacto con un centre de servicio cualificedo "SEARS". 1. Pedal del freno no presienado. 1. Presione el pedal del freno, 2+ Elem b raguedeIaccesorioest&enganchad o, 2. Desenganche elembrague 3. Baterfa baja o descargada. 4. 5, Fusible quemado. Terminales de la bateria corro{dos. 3. 4. Vuelva a cargar o cambie la bateria. Cambie elfusible, 6. Alambrado suelto 0 daAado. s. 6. Limpie los terminales de la bateria, Revise rode el alambrado. 7. 8, Interrupter de Ia igniciSn fallado. Solenoide 0 arrancedor fallados. 7. Revise/eambieelinterruptorde]aigniciSn, 8. Revise/camble el solenoide o arrancador. 9. lnterruptor(es} que exige(n) Ia presencia del operador fallado. 9, Pon_]ase on contacto con un centre de serv=ciocualificado "SEARS", 1, 2. Bater_a baja 0 descargada Terminalesde la bateria corroidos, 3. 4. Limple/cambie et t_ltro de aire, ,,,,,,, El motor no a vuelta _l motor suena pore no arranca delaccesorio. 1, Vuelva a cargar o cambie ]a baterla, Alambrado sueno 0 daSado, 2. .s. Umpie los terminales de la bateria, Revise todo el alambrado. S01enoide o arranc_dor fallados. 4. Revise/cambie el solenoide o arraneador, 65 IDENTIFICACION Vea la secci6n DE PROBLEMAS: apropiada en el manual a manes que est_ dirigido PROBLEMA : CAUSA P6rdfda de fuerza P6rdida de fuerza (sigue) Vibracibn excesiva 1. 2. a un centre de servicio Sears. CORRECCION CoKa touche cesped, muy r_pido. AceJerac[6n ea la posici6n de _ESTRAN_ GULAOION" (CHOKE), Acumulaci6n de c6sped, hejas y basura debajo de ]a segadora. Filtro de airs sucio, 1. Eleve la altorad e corte/mduzca 2 Ajuste 3. Limpie la parle inferior de la cajade la segadora. 4, 5. 6. Limpie/cambie el filtro de aire. Revise el nivel de aceite/cambie el aceite. Limpie y vuelva a ajustar Ia aberlara o cambie la bujfa. Cambie el filtro de combustible, 6, Nivet de aceite bajoiaceite sucio, Bujia faifada. 7. 8. F[Itre de combustible sucio. Combustible rancio o sucio, 7, 9. Ague en el combustible, 9. 8, 10. 11. 12. I3, 14 Alambrado de la bujla suelto. RejilIaialetas de airs del motor sucias, Silenciador sucioitaponado. Alambrado suelto o daSado, Oarburadot desajustado. 10, 11, "t2. t 3. 14. 15. V_tvulas del motor desajustadas, I5. el control Iave[ocid_,C de Ia aceieraci6n. Vaciarelestanquedecombustibleyvoelva a ffenarlo con _lasolit_anueva., Vaciar elestanquedecombustibleyelcarbufade r,vueiva a Ilenar elestanque con gasoline nueva y cambie el filtro de combustibfe. Conecte y apriete eI alambre de [a bujia, Limpie las rejillaialetas de airs del motor, Limpie/cambie el silanciador, Revise rode el a]ambrado, Vea"PARAAJUSTAR ELCARBURADOR" en la secci6n de Servicio y Ajustes, : Pongase en contacto con un centre de servicio cuatificado"SEARS", 1. Cuchilla desgastada, doblada o suelta, 1. 2. Mandril de ia cuchitla doblado, 2, 3. Parle(s) suelta(s)idaSada(s). 3. Apriete la(s) parts(s), Cambie las partes decades, Sistema de control que exige la presencia del operador -segurid_d failado, 1. Revise el alambrado, los interruptores y ta cene×iones.Si no est_.n correctas Pengase en contacto con un centre de servicio cualificado "SEARS". 1. Cuchilla desgastada, dobleda o soelta, 1, Gamble la cuchilla. Apriete el perno de la cuchilla. 2, El conjunto segador no estbnivelade. Acumulaci6n de c_sped, hojas y basura debajo de ta segadora. Mandril de Ia cuchitla doblado. 2. 3. Nivele el conjunto eegador. Limpie la parle inferior de Ia cajade la segadora, Cambie Ia mandril de la cucflilIa, 5_ Los agu ieros de ventilaci6n del coniunto segador taponadosdebido a la acumuIaci6n dec_osped, hojas y basura airededorde toe manddles. 5. 1. 2. Obstrucci6nenelmecanismodelembrague, La correa de impulsiSn de ta segadora est& desgastada!daSada. Polea de gu[a atascada. Mandril de Ia cuchilla atascado. i. 2. Cambie Ia cuchii]a. Apriete el perno de la cuchilla. Cambie la mandril de la cuchit]a. ,,,, El motor continua funcionando cuando o! operador se baia de| asiento con el embrague del accesor|o enganchado El corte disparejo 3, 4. La s cuchillas segadoras no rotan 3. 4. 66 4, Limpie alrededor de los mandriles para abrir los de ventilaci6n. Remueva ia obstrucci6n, Cambie la correa de impulsi6n segadora, s. Cambie la polea de gui_a, 4. Gambie la mandril de la cuchilIa. de la IDENTIFICACION DE PROBLEMAS: Vea la secci6n PROBLEMA Male descarga del c_sped apropiada en el manual a manes que est6 dirigido a un centre de servicio Sears. CAUSA t I. Ve[ocidad del motor m_y tenta, 1. 2. 3. Velocidad de recorddo demasiado r&pida. C_sped mojado, 2. 3. 4. 5. El conjunto segador no est&nivelado, Presi6n de airs de las tlantas baja o dispareia, Cuchilla desggstgda, doblada 0 suelta. 4. 5. Acumulaci6n de c_sped, hojas y basura debajo de la segadora. 8. ; La cortes de impu[si6nde fasegadora est', desgastada o desajustada, g. Las cushillas est_,n real coninstaladas, 7. 6. 7. 6, 8. g. 10. Cuchillas inadecuadas en use, 10. ;1. Los agujeros de ventilaci6n del conjunto agu eros segador taponados debido a I9 acumulaci6n de c_sped, hoias y basura alrededor de los mandriles, 11. P9nga el contrpl de [a aceleraci6n en la posici6n de "RAPIDO" (fast), Gamble a una velooidad m&s lenta, Permits que se seque e[ c6spedantes de sager. Nivele el conjunto segador. Revise las Ilantas pare verificarque tienen la presi6n de airs, Cambie/gfile la cuchilla. Apriete el pemo de la cuchilla. Limpie la parts inferior de la cgfade la segadora. Cambie/ajuste la cortes de impt_lsi6n de la segadora. Vuslva a instalar las cuchillaselberds afilgdo hgcia shale, Cambie per las cuchUlas enumeradas en este manual. Lirnpie alrededor de los manddles pare abrir los de ventilaci6n. t. El interrupter est,. '_PAGADO"(OFF), 1. "ENC,IEND,_' (ON) el interrupter, 2. BombilIa(s) o I&mpara(s) quemada(s), 2, Gamble la hornbills(s)o I_mpara(s). 3, Interrupter de la Iuz fallado. Alambrado suelto o debacle. 3, Revise/cambie el interrupter de la luz. 4, 4, Revise el alambrado y Ias conexiones. 5. Fusible quemado. 5. Cambie el fusible. Elemento(s) de fa baterla male(s), M_as conexiones de cables. Regulador fallado (si equipado). Aitemador fallado, 1, 2, ,3. 4. Gamble la bater_a. Revise/limpie todas las cables. Cambie el regulador, Cambie ef alternador, Residues es en de Ia place de direccibn ' (Si [os t(ene), La corre9 de movimiento es gastado o quebrado. Llgve euedrada de eje as ausente, "L Vea "LIM PtEZA" en la secci6n de Mantenimento de este manual. Raemplace Ia correade movim[en-to est9 gastada, dafiada o rata. Yea "PARA REMOVER LAS RUEDAS" en la secci6n de Ser¢icio y Ajustes de este manual, Elmotortien "contraexplosiones" ouando se "APAGA" El controlde [aase[eraci6n del motor no rue ajustado en la posici6n develocidad media y m_b_ima(r&pida) antes de pare el motor. 1. Mueva el control de fa ace[eraci6n ala posici6n de vel0cidad media y m_xima (r_,pida) antes de pare el motor, El tractor se ponen marcha atr,_s El sistem9 de funcionamiento atr&s (ROS) no eat& "ON", cuando enganche I9 segadora o otto accesorio. 1. Girar el ROS an ia,pgsici6n "ON",Vea la i secci6n de operacuon. L_s [uz (ces) de lantera(s) no funcionando La bateria no carga 2. 3, 4. P_rdtda de 1. impulsi6n 2. ,3, 2. 3, ,, ,,,,,L 67 68 89 70 GUIASUGERIDAPARAMEDIR LAS PENDIENTESCON LA VISTA PARA UNA OPERACIONSEGURA _ OVERTENCIA: Pare evitar da_os graves, haga funcEonar su tractor erribal y abajo de las pendientes, nunca transversalmente con respaeto e ]as pendientes. No cotter pendientes mayores de 15 grados. Haga los virajes graduaimente pare ev]tar volcerse o le p6rdide de control I_ I Tenga muaho auidado auando cambre de direcci6n I en ]as pendientes. 1. P_egar esta p_gina a 1o largo de la Ifnea punteada arriba ind]cada. 2. Tenet Ia pdgina ante de sf mismoa de modo qua su borde izqulerdo sea vertical pera|elo a! tronco del drbol u otra estructura verUcal. 3. Miter a travds del ptfegue en dlreccl6n de la pendtente qua se quiets medfr. 4. Comparar eI _nguIo dal pliegue con la pe_ld|ente del terreno. Your Home For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professlonal installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME ® (1-B00-469_t663) www.sears.com Anytime, day or night (U.S.A. and Canada) www.sears.ca Our Home For repair of carry-in products like vacuums, lawn equipment, and electronics, cart or go on-line for the nearest Sears Parts and Repair Center. 1-800-488-1222 Anytime, WWW.._ day or night (U.S.A. only) _tal's.col_ To purchasea protection agreement (U.S.A.) or maintenance agreement(Canada) on a product serviced by Sears: 1-800-827.6655 (U.SA) _ Para pedirservicio de reparadSn a domicilio, y pare ordenar piezas: _ 1-888"SU'HOGAR® _-800-361-6665 (Canada) © Sea_sBrands,LLC ® Registered Trademark / T_ Trar_emark! ;_ Service Mark ofSears Brands, LLC ® Marca Regislrada ! _ Mar'ca de F,_brica ! s= Met'ca _.cMa_'quede comm_Tca/ _o Marque d6po_e 09.29.I 1 BD de Ser_icio de Sacra de Sears Brands, LLC ;Branc_s, LLC Printed in the U.S.A.
This document in other languages
- español: Craftsman 917.25024